Search Results

Search found 14873 results on 595 pages for 'hard drives'.

Page 59/595 | < Previous Page | 55 56 57 58 59 60 61 62 63 64 65 66  | Next Page >

• iSCSI drives suddenly inaccessible or corrupted

  - by Hammer1

  I have two NAS (Seagate Black Armors) connected to our network through iSCSI to a Dell Optiplex 760 running 32-bit Windows 7 and Windows iSCSI Initiator. For some unknown reason within the last week both are reportedly inaccessible and/or corrupt (that is the error message generated when I attempt to open the on the iSCSI computer). However, connecting to either of them via direct IP goes off without a hitch. I've tried Error checking but received "The disk check could not be performed because Windows could not access the disk." I've tried System Recover to a date almost two weeks back thinking Windows update may have caused the issue but there is no change. Anyone have an explanation and/or a solution to get them reconnected? Thanks.

  Read the article

• FAT32 4 GB+ files

  - by zm15

  I'm having the problem of needing a hard drive that can be written to by both a Mac and a PC. I have found that FAT32 might be an option, but as a video editor I often deal with files over the 4 GB limit. And since Mac doesn't read NTFS (very well with third-party programs) I'm considering FAT32. I'm curious, what happens when you try to write a file that is over 4 GB? What is a good way around this?

  Read the article

• Why doesn't the Ubuntu Installer see all of my hard drives

  - by atodd

  I'm trying to setup a dual boot system with Windows Vista 64 (already installed) and Ubuntu 10.10. I added a new drive which is identical to the one Vista is installed on. When I boot into the LiveCD I can see and mount the second drive and edit it in Gparted. However, when I use the installer it will only bring up the drive that already has Vista installed. I've tried everything I know. I'm not sure if its a BIOS setting or something else I've missed.

  Read the article

• Why does my ReadyNas 4200 have a constant beep post disk failure

  - by swagner88

  Went to check on a high pitched constant beep coming from the server room and discovered that all the LED lights on the disks were black except one which had a constant green. Post a Re-boot nothing changed. Console indicated that that particular drive has failed. Pulled the drive out and BAM everything is fine. Except, the high pitched beep remains. Plan is currently to replace the drive with a new same size drive we happen to have purchased for expansion. My question is, what will this do? Will the NAS accept the new drive as a replacement for the failed one and decide to shut-up? The Manual for the device is almost to straight forward and says that I can just swap drives out as I need but I find that difficult to believe: http://www.readynas.com/download/documentation/HM/RN4200_HW_24May10.pdf

  Read the article

• DBan not working because disk has bad sectors?

  - by canadiancreed

  Attempting to wipe the drive of a laptop that I have before it's sold, and normally use DBAN to do so. However this time it starts and then finishes instantly with the following message. "DBAN finished with non-fatal errors This is usually cause by disks with bad sectors" Have tried multiple flags such as noverify to force it to skip this check (it doesn't show bad sectors in the OS scan in windows). but the error always comes back. This is the only time that I've seen this message, as every other of the few drives I've used this software on usually take 3-5 hours to do their job.

  Read the article

• Windows 7 won't recognize backup set can I script extracting the files in some other way?

  - by datatoo

  The Windows 7 Backup/Restore created multiple backup sets and I was able to restore the oldest version, but not the most recent, which is not seen by the application. I do see all of the zip files and there are hundreds in later versions. Is there a way to extract each of these correctly outside of the regular restoration method? Perhaps scripting an extract of each day one after another? further clarifying The backup files were all made to an external drive. The original computer died completely, power supply, drives everything. I am trying to reconstruct as much as possible and the only backup set recognized is 6 months older. This was recovered over a new install, but unzipping thousands of zip files is not really a simple unzip copy project as the original paths are not a simple thing to reconstruct.

  Read the article

• Merging partitions and removing windows of one partition

  - by SmartLemon

  I have two partitions on my laptop, I created a new one when installing windows 8 pro because windows 7 wouldn't upgrade to it for some odd reason. The main partition, which has 631 GB ( has windows 7 installed on it, and the second partition is 49.9 GB and has windows 8 installed on it. What I need to do is remove windows 7 from the other one (Yeah its dual booting), make it so it boots straight into windows 8, without showing the dual boot screen, and also merge the two drives together. Only problem is, I have no idea how to do this. Please don't use complete lamens terms, I am a software developer so I know at least a bit about computers. Here's disk management so you can see how its set out.

  Read the article

• DBan not working because disk has bad sectors? [migrated]

  - by canadiancreed

  Attempting to wipe the drive of a laptop that I have before it's sold, and normally use DBAN to do so. However this time it starts and then finishes instantly with the following message. "DBAN finished with non-fatal errors This is usually cause by disks with bad sectors" Have tried multiple flags such as noverify to force it to skip this check (it doesn't show bad sectors in the OS scan in windows). but the error always comes back. This is the only time that I've seen this message, as every other of the few drives I've used this software on usually take 3-5 hours to do their job.

  Read the article

• Secondary drive corrupted/not reading

  - by Sebastian

  When I connect my Seagate Barracuda to the computer, it shows up on the list of drives in Windows Explorer, but right clicking on it crashes Windows Explorer, opening it won't do anything, and I cannot start disk manager when it is connected. Trying to search the drive also freezes Windows Explorer. I have tried to run CHKDSK on it, and it was "unable to read $J data stream" for the Usn Journal. Also, it was an internal drive, but I pulled it out and hooked it up externally so I could test if it was that drive causing the problems. Is there any way for me to copy the files off of the drive?

  Read the article

• Hardware issue: UI freezes and hard drive light goes solid several times per hour

  - by alchemical

  I have a workstation that has been acting up for the last few weeks. It currently has Windows Server 2008 R2 installed on it, and 2 HDD mirrored. A few times per hour the screen will freeze up, applications will say "not responding", sometimes the screen will turn a lighter shaded color--at the same time the HDD light is on solid. This lasts anywhere from 10 to about 50 seconds. Could this be something with one of the drives or the mechanism keeping the mirror in place? Any other ideas?

  Read the article

• My (C:) drive changed from Basic to Dynamic, is this bad?

  - by bbman225

  I'm really worried here. My computer still runs, so I take this as a good sign, however let me explain my situation: I am trying to install Ubuntu Linux, and the installer was having problems, so I went back into the partitioning tool on my Windows 7 (after having successfully shrunken my C drive and created 55 GB unallocated space) and I attempted to create a new partition out of the 55 GB and make it a simple NTFS drive so that I could let the installer wipe it clean again and format it in whatever file system it prefers. Now, after googling it and running through the process I noticed that all of my drives, including the C drive and the one I just made changed from type "Basic" to type "Dynamic." What is a dynamic drive and should I be worried?

  Read the article

• Using a non-validated SED on a Dell R720

  - by a coder

  We were given a Dell R720 a couple years ago, and the machine currently has standard 300GB 3.5" SAS 15k drives. Our RAID controller is a Perc H710. We need to update our disks to FIPS 140-2 certified SED. According to Dell, they have only one tested/validated FIPS SED for this machine/controller, but it is a 7200rpm 3.5" unit. I'm showing that Dell offers a 600GB 15k FIPS SED in 3.5" configuration (Dell part number 342-0605), but they say they haven't validated or tested to know if it works. They informed us that we would not void our warranty in using this non-validated drive. How likely is it that our R720 with H710 controller will work with the non-validated drive? Are there significant differences in how drive manufacturers build SED that would prevent them from working consistently across different controllers?

  Read the article

• Partition table correpted in windows 7 machine as simple dynamic partition

  - by raki

  I have Windows 7 installed in my system. When I originally partitioned it I made 3 partitions and 16 gb space as unallocated. Later I tried to create a partition using this free space using diskmanagement tool. It shows free space as unusabe space and the only one option available is to make it as a simple partition. Unfortunately I made it as simple partition and all my partitions converted to simple dynamic partition. Now after reboot the OS is not loading. I tried to reinstall the OS by formatting the C drive, but it doesn't work. Now I can't load the OS properly. How can I install Windows 7 on my system without losing my data on the other two drives?

  Read the article

• Strange performance from RAID5 using WD RE4 disks

  - by Howard

  I've noticed a bit of a performance issue with some WD RE4 drives I'm using under AMD's hardware RAID solution. First a bit of background: Environment: Windows 7 home premium x64 HDD's: 3x 1TB WD Raid Edition 4 in a RAID 5 setup with 128 kbyte stripe (2TB usable space) Testing Tool: HD Tune, process set to "High Priority" Processor: AMD Phenom II x6 1100T Ram: 16GB DDR3/1600mhz Motherboard: MSI 970A-G45 The image below pretty much depicts the issue I'm having. Every test has the same thing, a period of similar length where the performance drops to a few megabytes a second. This can't be a TLER issue as the purpose of RE4's is to work around that. Any help would be greatly appreciated.

  Read the article

• Partition table correpted in windows 7 machine as simple dynamic partition

  - by raki

  I have Windows 7 installed in my system. When I originally partitioned it I made 3 partitions and 16 gb space as unallocated. Later I tried to create a partition using this free space using diskmanagement tool. It shows free space as unusabe space and the only one option available is to make it as a simple partition. Unfortunately I made it as simple partition and all my partitions converted to simple dynamic partition. Now after reboot the OS is not loading. I tried to reinstall the OS by formatting the C drive, but it doesn't work. Now I can't load the OS properly. How can I install Windows 7 on my system without losing my data on the other two drives?

  Read the article

• Issues with non-HP harddisk in HP ML 350 server?

  - by Torben Warberg Rohde

  I'm looking to buy some extra disk space for a HP ML 350 G5 server. It is for simple file-serving - not OS/system stuff. HP harddisks are insanely expensive, so I'm tempted to buy some other brand instead. I have heard that they sometime use special firmware on their disks, but I suspect that might just be HP spreading rumors to sell disks. Does anyone have experience using non-HP disks? Any features not working, or not being able to build the RAID at all? I'm looking at 2.5" SAS Seagate drives - Constellation 500 GB (7.2k) or Savvio 600 GB (10k).

  Read the article

• Will I be abled to access 2nd HDD from dual-boot

  - by Ruben

  I'm planning to have a dual-boot on my computer. I have 2 physical hard drives, one 500GB and one 2TB. What I want to do, is have a dual-boot setup (2 partitions, both 50 GB) for Windows 8 and Windows 7. But will I be able to access the 3rd partition on the disk, or the other disk from both OSs? In this case, it would be really useful to access files and install programs, because I could use them on both OSs, as long as I have the same registry keys.

  Read the article

• Is it possible create a 4TB bootable partition in the x86 edition of Windows Server 2003 Enterprise?

  - by Giffyguy

  I'd like to find out if there is any way to accomplish this, since it would benifit my storage server greatly. I am using a Promise FastTrak 8660 and five Seagate ST31000340NS 1TB drives in a RAID 5 array. I figure that if the x86 ENTERPRISE edition of Server 2003 can handle 64GB of RAM, it should have no problem supporting larger HDD volumes as well. I've read (somewhere...) that the Windows Server operating systems are not limited to the standard 2TB like Windows XP and 2000 are. I'm hoping it's something that just needs to be turned on, similar to the way PAE works for the 4GB RAM limit in x86 servers.

  Read the article

• Spanned volumes on new install

  - by Noio

  My Windows 7 Release Candidate is about to expire, so I'm going to do a clean install of a retail version. I have two volumes, on four physical drives, as follows: Disk 0: Spanned Volume (D:) Disk 1: Primary Partition, Boot/Windows Install (C:) Disk 2: Spanned Volume (D:) Disk 3: Spanned Volume (D:) If I install Windows to a formatted drive 1, will it still recognize the spanned volume in Disks 0, 2, and 3? The spanned volume is not redundant in any way, so the volume is 1.5TB consisting of three 500GB disks. I don't have the space to do an external backup, and I thought it was impossible to convert a spanned volume back to a basic volume.

  Read the article

• Is there a way for Windows 7 to show remaining disk space in the status bar?

  - by Matt Thompson

  This is really driving me nuts. I do a lot of moving media files to and from USB drives, and I am constantly looking to the status bar to see how much remaining space I have on a drive. It's quick, and doesn't involve any clicking. At least, that's what I used to do using Windows XP. Is there a way to get the status bar in Windows 7 to behave in the same way? I saw in a Wikipedia article that some features have been removed from Windows 7, including these two that seem to be affecting me the most: The size of any selected item and free disk space are not shown on the status bar. When no items are selected in a folder, neither the details pane nor the status bar show the total size of files in the folder. Are there any plug-ins or registry tweaks that can be made to return this functionality? If not what is the quickest way to get the remaining space on a drive without having to click on something and leaving the directory you are working in?

  Read the article

• Windows 8.1 installation: Which drive is the F drive?

  - by sammyg

  I am doing a clean install of Windows 8.1 on an old PC. It was purchased as download from Microsoft Store and written to and booted from a USB flash drive. It went through all of these steps: Copying Windows Files Getting files ready for installation Installing features Installing updates Then at "Getting finished" I am stuck at this stupid dialog box. Please unplug the following external drive and click OK to restart your computer and finish installing Windows. F: How do I tell what physical drive this is? Can I drop to command prompt during installation? And is it safe to unplug it while powered on? There is no external hard drive connected, none that I can see. There is no USB or FireWire drive connected externally. I think it sees one of the internal drives as external... in some weird way?!

  Read the article

• Is SATA bandwith per Port or per Controller?

  - by instanceofTom

  I always assumed that it was per Controller channel, and that If I have 4xSATA 3.0Gb/s ports on my Motherboard then I should have a potential 12.0Gb/s of bandwith. However, after doing some searching I found conflicting information suggesting that if I had 4xSATA drives connected to my MB and were using them simultaneously each drive would get only 3.0Gb/s /4 = 768 Mb/s max bandwith. So I wanted to clear up my understanding. Side question: Are there other hdd/ssd bandwith bottlenecks to be aware of? (Links to already answered questions are more than welcome)

  Read the article

• How SSD hard drive affected speed of your website (asp.net/linq/ms sql database)

  - by Sergey Osypchuk

  I have a small database (<1G) But we have a lot of complex logi? in website and client complains on render time, which is 3-5 seconds. We are not google, and thousands of users a day is our dream, so size is not a problem, but speed is important. Can anybody share with experience with SSD drives for ASP.NET (MVC)/LINQ/MS SQL based application ? How you performance increased? UPDATE: this whitepaper states that it will be 20 times faster. http://www.texmemsys.com/files/f000174.pdf

  Read the article

• Raid recovery in gigabyte GA-8I945 Pro

  - by epeleg

  This was a working machine until a few days ago. And now it won't boot into the OS, during startup if makes clicking sounds (I think from one of the drives). Installed OS: Windows 2003 Web edition Hardware: Gigabyte GA-8I945P Pro , 2*160G Sata in RAID1 configuration , 2 Volumes – 25G and the rest. When I installed windows on it, during setup, I pressed F6 and used ICH7DH drivers of RAID. The manual for the MOBO says: Step 1: After the POST memory test begins and before the operating system boot begins, look for a message which says "Press to enter Configuration utility" (Figure 4). Press CTRL+ I to enter the RAID BIOS setup utility. But the machine never shows this message. BIOS SATA RAID/AHCI Mode is set to RAID. Any ideas or pointers on what I can do to recover my data? Thanks

  Read the article

• Windows 7 keeps losing drive letters

  - by Dean Perry

  Windows 7 loses its drive letters and I have to keep manually assigning a drive letter everytime I plug in a hard drive, whether it's internal or external. The only way to get around it is to reinstall Windows 7 but the problem will come back after a few months. We are a PC repair company and plug in many drives during the say and it can be very frustrating having to keep assigning a drive letter every time a drive is plugged in. Windows Updates are turned off so it can't be that. Any reason why this would have happened?

  Read the article

< Previous Page | 55 56 57 58 59 60 61 62 63 64 65 66  | Next Page >