Search Results

Search found 6339 results on 254 pages for 'josh 24 2'.

Page 59/254 | < Previous Page | 55 56 57 58 59 60 61 62 63 64 65 66  | Next Page >

• Black bars around screen? Catalyst Control Center problem?

  - by Josh B

  I just newly install Ubuntu 12.04, and im running an HDMI cable from my computer to my ASUS monitor. Now in Windows 7, i did not have these black bar issues running at 1080p. But now in Ubuntu, i have these black bars. I installed the ATI Catalyst Control Center, and I went to go in to fix the scaling but it is grayed out. As you can see, even with the override box checked i still can not set the scaling. The monitor was set to a lower resolution to hopefully fix it but that did not work either. Does anyone know how to fix this? Thanks.

  Read the article

• Simple alternating text in Visual Basic 2008

  - by Josh Grate

  I have a simple completed program, but i would like to add one more feature to it but I'm not sure how. I have it set up to send a message automatically every 7 seconds when a text field is selected, repeating the message of course. What I would like for it to do is alternate between two separate messages, instead just repeating the one. I would like the new program to post at an interval of 12 seconds. Can you help me? Here is my coding. Public Class Form1 Private Sub Timer1_Tick(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Timer1.Tick SendKeys.Send(TextBox1.Text) SendKeys.Send("{ENTER}") End Sub Private Sub Button1_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button1.Click Timer1.Enabled = True Timer1.Interval = (TextBox2.Text) End Sub Private Sub Button2_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button2.Click Timer1.Enabled = False End Sub Private Sub Form1_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load Timer1.Enabled = False End Sub End Class

  Read the article

• PHP W3 Validator API, Is this good? [closed]

  - by Josh Purcell

  I was trying to find a way to see if my site's code was valid or not but I continuously going over to W3 Validator so I decided to make an "API" however it really isn't! I just wanted to know if anybody can find a better solution to the one I have made. This is what I currently use, with the usage of ?uri=http://www.mydomain.com : <?php if(!$_GET['uri']) { echo "No URI!"; } else { $CheckURI = "http://validator.w3.org/check?uri=".$_GET['uri']; $URL = file_get_contents($CheckURI); $Start = strpos($URL, "<title>") + 7; $End = strpos($URL, "</title>"); $Title = substr($URL, $Start, $End-$Start); if(preg_match('[Invalid]',$Title)) { //Code is INVALID echo "<a href='$CheckURI' title='This is not good!' target='_BLANK'>INVALID Source</a>"; } elseif(preg_match('[Valid]',$Title)) { //Code is VALID echo "<a href='$CheckURI' title='Check It Yourself!' target='_BLANK'>Valid Source</a>"; } else { //It Went WRONG echo ""; } }

  Read the article

• Bluetooth not working and terminal has no command line, just a blank screen Ubuntu 12.04

  - by Josh

  I recently upgraded to 12.04 from 11.10 (ironically 11.10 had everything working, it was just laggy and jittery - now stuff isn't working on 12.04). I plug in my bluetooth dongle and the bluetooth symbol appears in the status bar top right, I can "Turn on bluetooth" and "Turn off bluetooth" here, but it has no effect overall on the status of bluetooth. When I go to Bluetooth settings I can't make it turn on. Also, as I have now discovered, my terminal has no command line for me to do anything with. There is absolutely nothing there... just a black, blank screen... Help?!

  Read the article

• What's the difference between my nameserver and CName settings?

  - by Josh Mcquiston

  I have purchased a domain name(mxsoup.net) through GoDaddy, and it is just parked. In order to set up my custom URL for my SourceAudio site, they give me the following instructions: In order to host your site at a your own URL, we need you to set up some DNS records to point your URL to us. Specifically, we need two CNAME references, one for 'www.mxsoup.net' and one for 'secure.mxsoup.net', both of which should point to 'web2.sourceaudio.com'. But the rep on the phone at GoDaddy said that my site is hosted at HostMonster.com, and therefore I need to talk to them to accomplish this(which is possibly true, but my business owner says he hasn't purchased hosting for this particular domain, yet he does have some other sites in his hostmonster hosting acct.) My GoDaddy account shows that my nameservers are pointing at NS1.HOSTMONSTER.COM, and NS2.HOSTMONSTER.COM, and I can edit those. But is this the same as setting up the CNAME as described above? Any help would be greatly appreciated!

  Read the article

• wubi boots into grub after 12.04 install

  - by josh

  I would just like to recover the files off of the wubi install and then install a proper version of ubuntu, is there any way to recover the files? for further information. I had ubuntu 11.04 and used the update manager to update it to 12.04. it worked for aproximitely a day and then I had to do a hard reset the next day after what seemed to be artifact corruption. upon trying to reboot into ubuntu it brings up the grub command prompt "gnu grub version 1.99-12ubuntu5" i have previously done hard resets on it in the past, there is nothing in my windows hidden 000 recovery folder.

  Read the article

• Is having your own website important?

  - by Josh K

  How necessary or important is it? I try to keep a running list of blogs or sites to follow, but a lot of the time I pull up someone's profile and notice there isn't anything there. Is it really important? I understand are different levels of programming (from C/C++ system programmers to Rails and even Haskell and J) and not everyone works in a language easily worked with for web based applications. Not everything is web-centric, however with the advent of many popular and sometimes free services I don't think it's unreasonable to expect a majority of programmers to have a personal site.

  Read the article

• Google Analytics on Demo Site

  - by Josh Smith

  Will adding the UA code of the live site to a revision site affect anything adversely? They are, technically, two different sites with different metrics. I don't want to lose the old data when I initiate the new site, of course. I would also like to work on setting up the new analytics page while the revision site is in development. Does anyone have any good workflows on setting up a revision site without losing old site data?

  Read the article

• certain files not syncing

  - by Josh

  I have UbuntuOne set up to sync a one folder with a number of subfolders. For some reason some of the subfolders have stopped syncing. Within one subfolder with 6 subfolders in it, some are showing up empty (they shouldn't be) and some are showing up with only some of the files they should contain. I have synced recently, and newer files are showing up in other subfolders. There's just some problem with these particular folders. They are not especially big nor do they have especially big files in them. Thoughts?

  Read the article

• Why does nothing work after I randomly changed some file permissions?

  - by Josh B

  Ok so last night i was trying to set permissions to some folders in my File System, since apparently im not an admin on my own computer. And now everything got messed up today and i don't know what to do.. I lost my internet, the icon is not showing in the taskbar anymore. I lost my sound, there is no sound devices listed when i go into the sound menu. I can not log into root anymore, it gives me "sudo: must be setuid root" I can not plug anything in anymore, it will not recognize flash drives or external hard drives. It gives me a Internal Error message everytime i log in It doesn't let me log into the Grub screen anymore on boot up. What did i do? I have a lot of files on here i wish to put on a flash drive but it won't recognize it.

  Read the article

• What are the most necessary non-language specific things a programmer needs to know?

  - by Josh

  I've been thinking about this a lot lately. Right now I work at a little web company, am almost done with school, and have written an iPhone app, but I'm not sure what else I need to focus my learning energies on. I've decided I want to do software programming, so I've been actively reading everything I can get my hands on that deals with Objective-C / C++ (Cocoa, OpenGL, etc). But those are not the things I'm talking about. I know I need to "master" a language or two. What I'm talking about are the other "things". Things such as learning and using source control, design patterns, etc. What thing (or things, just one per response), would you say I should concurrently be focusing on? You can consider in your answer that I'm wanting to do the aforementioned career path, but you don't have to. I just want a nice list of things to research, and actually use in my career. Also, can someone help me with tagging this? I'm not sure what exactly would be a good tag for such a question.

  Read the article

• What language(s) do I need to learn in order to develop an application like this?

  - by Josh

  I have an idea for making a web application. Ideally this application would have products which prices are increased each time a Retweet of the product at hand is made. Kind of like bids with tweets. Unfortunately my web development knowledge is very scarce. I know just basic HTML, virtually no CSS and that's it. I'm kindly asking for your insights on what you think would be best for making a web app like this. I have no good idea of where to start or what I need to get going. Your inputs are greatly appreciated. Thanks in advance.

  Read the article

• 3 Monitors, Ubuntu 12.04, Gnome 3, 2 nvidia cards, WITH xrandr or xinerama?

  - by Josh

  Ok. I have been banging my head against the wall for over a week now trying to get 3 monitors to work. I have: 1 - Nvidia 8600 GT 512MB PCIEx16 1 - Nvidia GT 240 1GB PCIEx16 They are not running in SLI (obviously). I have tried to use everything from tutorials to a few templates, all the way up to nvidia-settings, etc etc etc.. From what I hear, Xinerama doesnt like gnome 3 because of the compositing, although I have read a lot about using Xrandr instead, and getting the compositing working, but alas, I cannot. It always either crashes X and I have to replace the xorg.conf with my backup, or it defaults to the gnome-classic desktop, and on top of that, when it does default, it keeps adding more and more panels. Basically, I want to be able to use all 3 monitors (yes, just like in windows) to drag and drop from different windows. I have xorg-edit, but I am still not too sure on how to set this up? Is there any way to: A Get compositing working with 3 monitors, 2 nvidia cards, xinerama, and gnome 3? or BUse twinview with 3 monitors (I have heard it can be done by manually editing xorg.conf) or CSet up Xrandr to draw all 3 monitors with compositing. or DUse separate X for each monitor, and be able to use gnome with compositing, as well as drag between all 3 or EANYTHING. lol. I just want this to work. Any help you can provide would be greatly appreciated. BTW, I am running an ubuntu mini install with gnome. Everything works great but this. I can run it fine with 2 monitors and compositing, but not with 3. Also, what is the best GUI tool for editing xorg.conf? Im not finding anything that is up to date at all, and also is understandable by humans. haha. Im actually an engineer by trade, and have been working with computers a LONG time, but this xorg.conf stuff is really confusing the crap out of me. lol Thanks!

  Read the article

• Monitor not recognised after apt-get upgrade on 11.10 - maximum 1024x768 resolution

  - by Josh

  I did an apt-get upgrade through update manager on 11.10. After restarting my VGA monitor is no longer recognised and I can only get a maximum of 1024x768 on a 1440x900 monitor. I can't find xorg.conf so I am pretty lost! xrandr output: Screen 0: minimum 320 x 200, current 1024 x 768, maximum 4096 x 4096 VGA-0 connected 1024x768+0+0 (normal left inverted right x axis y axis) 0mm x 0mm 1024x768 60.0* 800x600 60.3 56.2 848x480 60.0 640x480 59.9 DVI-0 disconnected (normal left inverted right x axis y axis) S-video disconnected (normal left inverted right x axis y axis)

  Read the article

• snapping an angle to the closest cardinal direction

  - by Josh E

  I'm developing a 2D sprite-based game, and I'm finding that I'm having trouble with making the sprites rotate correctly. In a nutshell, I've got spritesheets for each of 5 directions (the other 3 come from just flipping the sprite horizontally), and I need to clamp the velocity/rotation of the sprite to one of those directions. My sprite class has a pre-computed list of radians corresponding to the cardinal directions like this: protected readonly List<float> CardinalDirections = new List<float> { MathHelper.PiOver4, MathHelper.PiOver2, MathHelper.PiOver2 + MathHelper.PiOver4, MathHelper.Pi, -MathHelper.PiOver4, -MathHelper.PiOver2, -MathHelper.PiOver2 + -MathHelper.PiOver4, -MathHelper.Pi, }; Here's the positional update code: if (velocity == Vector2.Zero) return; var rot = ((float)Math.Atan2(velocity.Y, velocity.X)); TurretRotation = SnapPositionToGrid(rot); var snappedX = (float)Math.Cos(TurretRotation); var snappedY = (float)Math.Sin(TurretRotation); var rotVector = new Vector2(snappedX, snappedY); velocity *= rotVector; //...snip private float SnapPositionToGrid(float rotationToSnap) { if (rotationToSnap == 0) return 0.0f; var targetRotation = CardinalDirections.First(x => (x - rotationToSnap >= -0.01 && x - rotationToSnap <= 0.01)); return (float)Math.Round(targetRotation, 3); } What am I doing wrong here? I know that the SnapPositionToGrid method is far from what it needs to be - the .First(..) call is on purpose so that it throws on no match, but I have no idea how I would go about accomplishing this, and unfortunately, Google hasn't helped too much either. Am I thinking about this the wrong way, or is the answer staring at me in the face?

  Read the article

• Trying to re-install ubuntu 11.10on an HP Pavillion G6, screen goes black after the ubuntu logo shows.How do I get it to install normally?

  - by Josh Towers

  Installed Ubuntu 11.1 successfully without my wireless device being recognized. Used sudo apt-get update + upgrade commands to attempt to fix this. Computer crashes after upgrade and now it won't finish re-installing Ubuntu, after it shows the first purple screen with the Ubuntu logo, the screen goes black. Used the Derik's Boot Nuke CD and then attempted re-installment again, and the black screen problem remains consistent, seemingly no matter what I do. It sounds like it's installing but won't let me see anything or go anywhere. heelllppp

  Read the article

• Having extreme issues getting Compiz working on Ubuntu 11.10 (32-bit)

  - by Josh Hornell

  I have been working very hard the past few days to try to get Compiz configured and working correctly but I have been running into a lot of issues. I first installed the CompizConfig Settings Manager and tried different features such as the desktop cube and couldn't get any of them to work. Then I read that I may not have the right graphics card drivers installed (Nvidia GT540m). So I went into the Additional Drivers tool and it shows that 'no proprietary drivers are in use on this system', which struck me as a bit odd as when I very first installed Ubuntu it showed that my Nvidia drivers were installed an active until I downloaded and installed the updates to Ubuntu and since then it's shown empty. I then tried to install my graphics card drivers manually via this article How do I install the latest Nvidia drivers via the Additional Drivers tool?. I rebooted and had no issue although I tried to go back into the CompizConfig Settings Manager and couldn't get anything to work as well as my Additional Drivers tool still showed no drivers installed. I feel like I've tried about everything I can think of and any help would be much appreciated!

  Read the article

• Application trying to use the wrong shared library

  - by Josh

  I'm having a problem with a program (quartus) running on my ubuntu machine. I'm getting the following error. quartus: symbol lookup error: /usr/lib/i386-linux-gnu/libXi.so: undefined symbol: XESetWireToEventCookie I have the correct libXi.so.6.0.0 file but no matter where I put it, the OS won't use it unless I apt-get remove libxi-dev, but a lot of software uses this libXi. What I want to do is add some sort of exception to the dynamic linker so that quartus uses the libXi.so that it needs and everything else still uses the one in /usr/lib/i386-linux-gnu. Thanks!

  Read the article

• Installed Ubuntu on 12.04 on my MacBook Air now I want to expand the partition

  - by Josh

  I recently installed Ubuntu 12.04 on a 40GB partition on my Mac Book Air (5,2). I'm having so much fun with it, I'm ready to make the switch permanently and replace it as the primary OS on my machine. I realize I can wipe the machine and start from scratch, but I'm looking for alternatives since I like my current setup. Options are... Create a backup and restore the back up to a larger partition (Assuming I should keep the default OS X install for firmware updates) Create a backup and restore to the entire drive (create a restore usb stick for OSX - not sure if that's possible?) re-size my current partition and wipe the OS X partition and either, A. re-install OS X (similar to option 1) or B. create the USB key (similar to option 2). Thoughts? Any other suggestions? Would also like thoughts on the "optimal" or "best practice" for partitioning Ubuntu. Thanks!

  Read the article

• ignoring informational payload, type INVALID_COOKIE msgid=00000000

  - by user197279

  I'm configuring a site-to-site vpn between openswan ipsec and cisco asa 5540. After the step, i started ipesc service but the error i'm seeing is: ignoring informational payload, type INVALID_COOKIE msgid=00000000 Nov 5 09:42:30 pluto[11712]: "myVPN" #1: received and ignored informational message Nov 5 09:42:51 pluto[11712]: "myVPN" #1: ignoring informational payload, type INVALID_COOKIE msgid=00000000 Nov 5 09:42:51 pluto[11712]: "myVPN" #1: received and ignored informational message Nov 5 09:43:30 pluto[11712]: "myVPN" #1: max number of retransmissions (2) reached STATE_MAIN_I2 Nov 5 09:43:30 pluto[11712]: "myVPN" #1: starting keying attempt 2 of at most 3 Any advise why I'm getting this error on openswan? Also sudo ipsec whack --status gives: "myVPN": 10.0.xx.0/24===10.0.7x.x[54.209.y.yyy,+S=C]---10.0.xx.x...10.0.70.x---41.22x.4.xx<41.22x.4.xx[+S=C]===41.22y.4.yyy/32; unrouted; eroute owner: #0 000 "myVPN": myip=54.209.zz.zz; hisip=unset; 000 "myVPN": ike_life: 86400s; ipsec_life: 28800s; rekey_margin: 540s; rekey_fuzz: 100%; keyingtries: 3 000 "myVPN": policy: PSK+ENCRYPT+TUNNEL+DONTREKEY+UP+IKEv2ALLOW+SAREFTRACK+lKOD+rKOD; prio: 24,32; interface: eth0; 000 "myVPN": newest ISAKMP SA: #0; newest IPsec SA: #0; 000 "myVPN": IKE algorithms wanted: AES_CBC(7)_256-SHA1(2)_000-MODP1024(2); flags=-strict 000 "myVPN": IKE algorithms found: AES_CBC(7)_256-SHA1(2)_160-MODP1024(2) 000 "myVPN": ESP algorithms wanted: AES(12)_256-SHA1(2)_000; flags=-strict 000 "myVPN": ESP algorithms loaded: AES(12)_256-SHA1(2)_160 000 000 #5: "myVPN":500 STATE_MAIN_I2 (sent MI2, expecting MR2); EVENT_RETRANSMIT in 8s; nodpd; idle; import:admin initiate 000 #5: pending Phase 2 for "myVPN" replacing #0 Thanks.

  Read the article

• Juniper EX3300 routing issue

  - by Richard Whitman

  The routing on my Juniper EX3300 does not seem to be working. My ISP's gateway is at xx.xx.xx.xx. And I have the following in the configuration: routing-options { static { route 0.0.0.0/0 { next-hop xx.xx.xx.xx; retain; } } } I can ping to my ISP's gateway from the switch. However, I can NOT ping to any other IP. When I do a traceroute (to Google.com's IP). This is what I get: traceroute to 74.125.224.69 (74.125.224.69), 30 hops max, 40 byte packets traceroute: sendto: No route to host 1 traceroute: wrote 74.125.224.69 40 chars, ret=-1 *traceroute: sendto: No route to host Do I need to enable any protocols? I guess this goes without saying, but I am kind of new to Junos. Update: This is the output from show interfaces terse | match inet: bme0.32768 up up inet 128.0.0.1/2 jsrv.1 up up inet 128.0.0.127/2 vlan.0 up up inet 10.0.1.1/24 vlan.1 up up inet xx.xx.xx.110/30 and this is the output from: show route forwarding-table: Routing table: default.inet Internet: Destination Type RtRef Next hop Type Index NhRef Netif default perm 0 rjct 36 1 0.0.0.0/32 perm 0 dscd 34 1 10.0.1.0/24 intf 0 rslv 1321 1 vlan.0 10.0.1.0/32 dest 0 10.0.1.0 recv 1319 1 vlan.0 10.0.1.1/32 intf 0 10.0.1.1 locl 1320 2 10.0.1.1/32 dest 0 10.0.1.1 locl 1320 2 10.0.1.3/32 dest 1 0:25:90:63:26:53 ucst 1331 2 vlan.0 10.0.1.255/32 dest 0 10.0.1.255 bcst 1318 1 vlan.0

  Read the article

• Cacti rrdtool graph with no values, NaN in .rrd file

  - by beicha

  Cacti 0.8.7h, with latest RRDTool. I successfully graphed CPU/Interface traffic, but got blank graphs like when it comes to Memory/Temperature monitoring. The problem/bug is actually archived here, however this post didn't help. I can snmpget the value, e.g SNMPv2-SMI::enterprises.9.9.13.1.3.1.3.1 = Gauge32: 26. However, the problem seems to exist in storing these values to the .rrd file. Output of rrdtool info powerbseipv6testrouter_cisco_memfree_40.rrd AVERAGE cisco_memfree as below: filename = "powerbseipv6testrouter_cisco_memfree_40.rrd" rrd_version = "0003" step = 300 last_update = 1321867894 ds[cisco_memfree].type = "GAUGE" ds[cisco_memfree].minimal_heartbeat = 600 ds[cisco_memfree].min = 0.0000000000e+00 ds[cisco_memfree].max = 1.0000000000e+12 ds[cisco_memfree].last_ds = "UNKN" ds[cisco_memfree].value = 0.0000000000e+00 ds[cisco_memfree].unknown_sec = 94 rra[0].cf = "AVERAGE" rra[0].rows = 600 rra[0].pdp_per_row = 1 rra[0].xff = 5.0000000000e-01 rra[0].cdp_prep[0].value = NaN rra[0].cdp_prep[0].unknown_datapoints = 0 rra[1].cf = "AVERAGE" rra[1].rows = 700 rra[1].pdp_per_row = 6 rra[1].xff = 5.0000000000e-01 rra[1].cdp_prep[0].value = NaN rra[1].cdp_prep[0].unknown_datapoints = 0 rra[2].cf = "AVERAGE" rra[2].rows = 775 rra[2].pdp_per_row = 24 rra[2].xff = 5.0000000000e-01 rra[2].cdp_prep[0].value = NaN rra[2].cdp_prep[0].unknown_datapoints = 18 rra[3].cf = "AVERAGE" rra[3].rows = 797 rra[3].pdp_per_row = 288 rra[3].xff = 5.0000000000e-01 rra[3].cdp_prep[0].value = NaN rra[3].cdp_prep[0].unknown_datapoints = 114 rra[4].cf = "MAX" rra[4].rows = 600 rra[4].pdp_per_row = 1 rra[4].xff = 5.0000000000e-01 rra[4].cdp_prep[0].value = NaN rra[4].cdp_prep[0].unknown_datapoints = 0 rra[5].cf = "MAX" rra[5].rows = 700 rra[5].pdp_per_row = 6 rra[5].xff = 5.0000000000e-01 rra[5].cdp_prep[0].value = NaN rra[5].cdp_prep[0].unknown_datapoints = 0 rra[6].cf = "MAX" rra[6].rows = 775 rra[6].pdp_per_row = 24 rra[6].xff = 5.0000000000e-01 rra[6].cdp_prep[0].value = NaN rra[6].cdp_prep[0].unknown_datapoints = 18 rra[7].cf = "MAX" rra[7].rows = 797 rra[7].pdp_per_row = 288 rra[7].xff = 5.0000000000e-01 rra[7].cdp_prep[0].value = NaN rra[7].cdp_prep[0].unknown_datapoints = 114

  Read the article

• Ierrs on Network Interface - Pfsense/Freebsd

  - by JFA

  Hello all, We're using PfSense as an internal router/firewall (no connection to WAN). Using the Web-GUI, under Status --- Interfaces, there's one particular interface where I have some errors: In/out errors 3513/0 I then SSHed to the firewall to validate the info provided by the WebGUI and here's the output: # netstat -ni -I bce2 Name Mtu Network Address Ipkts Ierrs Opkt Oerrs Coll bce2 1500 <Link#3> 00:23:7d:cd:a2:a2 1404522323 3513 749797131 0 0 bce2 1500 10.42.1.0/24 10.42.1.24 6 - 6 - - As you can see, both present the same info (errors on incoming packets). I switched cables, changed network card, changed port on switch and I still see the errors. My 2 questions really are: 1) Is there any way I could get more info on the nature of these errors? or is this all I can get? 2) Should I be worried about this? As you can see, the errors are a VERY LOW percentage of all the total incoming packets. In other words, is this normal on a high-traffic gigabit interface? Thanks! JFA

  Read the article

• Stange stream of HTTP GET requests in apache logs, from amazon ec2 instances

  - by Alexandre Boeglin

  I just had a look at my apache logs, and I see a lot of very similar requests: GET / HTTP/1.1 User-Agent: curl/7.24.0 (i386-redhat-linux-gnu) libcurl/7.24.0 \ NSS/3.13.5.0 zlib/1.2.5 libidn/1.18 libssh2/1.2.2 Host: [my_domain].org Accept: */* there's a steady stream of those, about 2 or 3 per minute; they all request the same domain and resource (there are slight variations in user agent version numbers); they come form a lot of different IPv4 and IPv6 addresses, in blocs that belong to amazon ec2 (in Singapore, Japan, Ireland and the USA). I tried to look for an explanation online, or even just similar stories, but couldn't find any. Has anyone got a clue as to what this is? It doesn't look malicious per say, but it's just annoying me, and I couldn't find any more information about it. I first suspected it could be a bot checking if my server is still up, but: I don't remember subscribing to such a service; why would it need to check my site twice every minute; why doesn't it use a clearly identifying fqdn. Or, should I send this question to amazon, via their abuse contact? Thanks!

  Read the article

• Ipsec config problem // openswan

  - by user90696

  I try to configure Ipsec on server with openswan as client. But receive error - possible, it's auth error. What I wrote wrong in config ? Thank you for answers. #1: STATE_MAIN_I2: sent MI2, expecting MR2 003 "f-net" #1: received Vendor ID payload [Cisco-Unity] 003 "f-net" #1: received Vendor ID payload [Dead Peer Detection] 003 "f-net" #1: ignoring unknown Vendor ID payload [ca917959574c7d5aed4222a9df367018] 003 "f-net" #1: received Vendor ID payload [XAUTH] 108 "f-net" #1: STATE_MAIN_I3: sent MI3, expecting MR3 003 "f-net" #1: discarding duplicate packet; already STATE_MAIN_I3 010 "f-net" #1: STATE_MAIN_I3: retransmission; will wait 20s for response 003 "f-net" #1: discarding duplicate packet; already STATE_MAIN_I3 003 "f-net" #1: discarding duplicate packet; already STATE_MAIN_I3 003 "f-net" #1: discarding duplicate packet; already STATE_MAIN_I3 010 "f-net" #1: STATE_MAIN_I3: retransmission; will wait 40s for response 031 "f-net" #1: max number of retransmissions (2) reached STATE_MAIN_I3. Possible authentication failure: no acceptable response to our first encrypted message 000 "f-net" #1: starting keying attempt 2 of at most 3, but releasing whack other side - Cisco ASA. parameters for my connection on our Linux server : VPN Gateway 8.*.*.* (Cisco ) Phase 1 Exchange Type Main Mode Identification Type IP Address Local ID 4.*.*.* (our Linux server IP) Remote ID 8.*.*.* (VPN server IP) Authentication PSK Pre Shared Key Diffie-Hellman Key Group DH 5 (1536 bit) or DH 2 (1024 bit) Encryption Algorithm AES 256 HMAC Function SHA-1 Lifetime 86.400 seconds / no volume limit Phase 2 Security Protocol ESP Connection Mode Tunnel Encryption Algorithm AES 256 HMAC Function SHA-1 Lifetime 3600 seconds / 4.608.000 kilobytes DPD / IKE Keepalive 15 seconds PFS off Remote Network 192.168.100.0/24 Local Network 1 10.0.0.0/16 ............... Local Network 5 current openswan config : # config setup klipsdebug=all plutodebug="control parsing" protostack=netkey nat_traversal=no virtual_private=%v4:10.0.0.0/8,%v4:192.168.0.0/16,%v4:172.16.0.0/12 oe=off nhelpers=0 conn f-net type=tunnel keyexchange=ike authby=secret auth=esp esp=aes256-sha1 keyingtries=3 pfs=no aggrmode=no keylife=3600s ike=aes256-sha1-modp1024 # left=4.*.*.* leftsubnet=10.0.0.0/16 leftid=4.*.*.* leftnexthop=%defaultroute right=8.*.*.* rightsubnet=192.168.100.0/24 rightid=8.*.*.* rightnexthop=%defaultroute auto=add

  Read the article

< Previous Page | 55 56 57 58 59 60 61 62 63 64 65 66  | Next Page >