Search Results

Search found 12472 results on 499 pages for 'remote debugging'.

Page 59/499 | < Previous Page | 55 56 57 58 59 60 61 62 63 64 65 66  | Next Page >

• Can't connect disk management to remote XP PC from local Win7/Server 2008

  - by Grez

  Scenario as follows: support technicians using Windows 7 PC's or Server 2008 terminal server are unable to connect Disk Management MMC snap in to a remote PC when the remote device is running Windows XP. "Disk management could not start Virtual Disk Service (VDS) on ". This can happen if the remote computer does not support VDS, or if a connection cannot be established because it was blocked by Windows Firewall." Connecting from another XP machine or 2003 server to the same XP machines works fine. Even connecting from XP/2003 to the Win7 or 2008 server works fine. Windows firewall disabled on all devices. I'm guessing this is something to do with the fact that XP uses logical disk manager service whereas Win7/2008 use Virtual disk manager service. But there doesn't seem to be any way to use logical disk manager service from 7/2008 to connect to XP...

  Read the article

• forwarding port 3306 on macosx in order to connect to a remote mysql db

  - by Jonathan Mayhak

  I'm on macosx 10.6.2 trying to connect to ubuntu server 8.04.1 at linode. ssh -L 127.0.0.1:3306:[[remote ip]]:3306 user@server -N I want to set up ssh tunneling so that I can access a remote mysql server. First of all, I'm told bind: Address already in use. This is only after I've tried the command before. How do I manually close a port forwarding session? Second, when I change the command to be ssh -L 127.0.0.1:3310:[[remote ip]]:3306 user@server -N (I changed the local port to listen on). I'm told channel 1: open failed: connect failed: Connection refused when I try to connect to the mysql server via mysql workbench or sequel pro. To connect through mysql workbench I use the following settings: host: 127.0.0.1 port: 3310 (if 3306 is in use) username: mysql username password: mysql password database: I don't put anything in

  Read the article

• Forwarding port 3306 on Mac OS X in order to connect to a remote MySQL Database

  - by Jonathan Mayhak

  I'm on Mac OS X 10.6.2 trying to connect to ubuntu server 8.04.1 at linode. ssh -L 127.0.0.1:3306:[[remote ip]]:3306 user@server -N I want to set up ssh tunneling so that I can access a remote mysql server. First of all, I'm told bind: Address already in use. This is only after I've tried the command before. How do I manually close a port forwarding session? Second, when I change the command to be ssh -L 127.0.0.1:3310:[[remote ip]]:3306 user@server -N (I changed the local port to listen on). I'm told channel 1: open failed: connect failed: Connection refused when I try to connect to the MySQL server via MySQL workbench or sequel pro. To connect through MySQL workbench I use the following settings: host: 127.0.0.1 port: 3310 (if 3306 is in use) username: mysql username password: mysql password database: I don't put anything in

  Read the article

• Howto print from dumb terminals with local print server and remote hosted RDP

  - by Matt

  We have essentially a remote office with about 5 dumb terminals. The terminals are connecting to our office directly over a wireless link. What I want to do is connect all their printers onto a print server. But since the remote office is not actually allowed to see our LAN (since they are actually another company) we don't want a full on open VPN tunnel set up. Naturally the RDP traffic passes through a firewall. Is there an easy way to set up the RDP server so that it can see a print server on a remote LAN?

  Read the article

• Remote Yum mirror

  - by specto

  I have a bunch of remote computers that must be updated to the most recent packages for RedHat 4 and RedHat 5. I am using mrepo to mirror the RHN packages, however the remote computers do not have an internet connection. Because of this I have to update the mirror server that is part of the remote computers with a dvd. This is to cut down shipping costs to just a dvd. I am attempting to script this so I can fit all of the new packages on a CD or a DVD. I send updates about once or twice a month depending on package requirements. So my question is, is their a good method to do this so that the only things transferred are the new packages? I wish I could just use rsync. Thanks.

  Read the article

• Tool needed for remote software deployment to Windows PC's over internet

  - by user56527

  Hi Can anyone recommend a commercial software package that enables automated rollouts of a bespoke software package across the internet? We are looking at approximately 1000 remote PC's that our organisation owns, geographically scattered and with varying bandwidths available from a central site. The PC's are not manned, they are used as server machines. The tool needs to have some scripting facilities too. The tool needs to be able to push software to the remote site in an automated way. We also need it to be able to reboot the remote machine too. Any ideas anyone? thanks.

  Read the article

• PHP Mail Relay via Remote smtp Server

  - by Toqeer

  We have a php application running on Linux which sends emails to there users. Currently its setup like php.ini is configured to send via local sendmail server but we have separate mail server for our organization for this domain. I want to send the php application emails via that remote smtp server so these emails can have the correct SPF records and sign via DKIM. But I could not see such option in php.ini to specify the remote host address to forward emails to that, its for windows only. I saw some post which suggest phpMailer but I could not find how to configure that so all our php application could send via our remote SMTP.

  Read the article

• IIS web service responds on server, not from remote client

  - by Aharon Manne

  I have installed a web service on a server running IIS (v6, as far as I can tell). There is another service installed, which responds as expected. My service responds correctly when a browser is pointed to localhost, but there is no response when a remote client tries to query the service. Fiddler on the remote client simply reports a timeout. Wireshark on the remote client shows no response at all from the server, no NACK, nothing. Wireshark on the server detects no query at the relevant port (the service is installed on port 8080). There are no relevant entries in the event viewer. Obviously there is some issue of permissions or authentication. I have tried to compare my service to the service that works, but I have not been able to locate relevant parameters. Any help would be greatly appreciated.

  Read the article

• Outlook Anywhere remote https connection issue

  - by holian

  We have SBS 2003, and we use DYNDNS. We forward dyndns address 443 to local server ip 443 port. mycompany.dyndns.org:443 -- server.mycompany.local:443 In android phone i can check my mails with Outlook Active Snyc. From remote machine i can check my mails in owa (https://mycompany.dyndns.org/exchange) But i can't set up outlook 2013 to remote connect. I installed server.mycompany.local to remote machine trusted cert container, but i got error message: "There is a problem with the proxy server's security certificate. The name on the security certificate is invalid or does not match the name of the target site. Outlook is unable to connect to the proxy server. (Error Code 10)" Is it possible to connect exchange, via dnydns? Whats the problem? Thank you

  Read the article

• Unable to connect to remote MS SQL Server 2008 Express SP3 instance by name

  - by Max

  I am trying to connect to a remote MS SQL Server 2008 SP3 x86 Instance using it's name. At the first glance all seems to work well (e.g. it is possible to connect to the server locally and succesfully telnet it's port remotely), but there is a thing I can't understand... This line should connect us to the default instance of remote SQL Server: osql -S ServerIP -d MyDatabase /U sa -P MyPassword and it does the trick, however the next one: osql -S ServerIP\MyInstance -d MyDatabase /U sa -P MyPassword ends up with the following error: [SQL Native Client]SQL Network Interfaces: Error Locating Server/Instance Specified [xFFFFFFFF]. [SQL Native Client]Login timeout expired [SQL Native Client]An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. The only instance running on the server is MyInstance, which is (I guess) the default one. Could you please put some time in explaining the issue.

  Read the article

• Remote Access Without Explicit Permission: Convenience or Liability?

  - by routeNpingme

  For outsourced professional IT remote support, one habit most new technicians get into is the "instead of getting the user to start up remote support each time, I'll go ahead and install LogMeIn / GoToMyPC / Remote Desktop / whatever so that if they call again, I can just jump on and help them". This of course opens up a potential liability because a client PC on a network that we don't own is being accessed without a user explicitly providing permission by clicking a "Yes, allow technician to control my PC" option. I realize the rules totally change when you're an IT admin over a network that you "own", but this is outsourced IT support. Just curious what others' policies are. Is this an acceptable practice for convenience and I'm turning into one of those "security is more important than anything" people, or is this really a liability?

  Read the article

• scp to remote servers stalls, unable to isolate cause

  - by Rolf

  When I copy a large file (100+mb) to a remote server using scp it slows down from 2.7 mb/s to 100 kb/s and downward and then stalls. The problem is that I can't seem to isolate the problem. I've tried 2 different remote servers, using 2 local machines (1 osx, 1 windows/cygwin), using 2 different networks/isps and 2 different scp clients. All combinations give the problem except when I copy between the two remote servers (scp). Using wireshark I could not detect any traffic volume that would congest the network (although about 7 packets/sec with NBNS requests from the osx machine). What in the world could be going on? Given the combinations I've used there doesn't seem to be any overlap in the thing that could be causing the trouble.

  Read the article

• rsync remote to local automatic backup

  - by Mark Molina

  Because all my work is stored on a remote server I would like to auto backup my server monthly and weekly. My server is running Centos 5.5 and while searching the web I'm found a tool named rsync. I got my first update manually by using this command in terminal: sudo rsync -chavzP --stats USERNAME@IPADDRES: PATH_TO_BACKUP LOCAL_PATH_TO_BACKUP I then prompt my password for that user and bob's my uncle. This backups the necessary files from my remote server to my local device but does somebody know how I can automate this? Like automatic running this script every sunday? EDIT I forgot to mention that I let direct admin backup the files I need and then copy those files from the remote server to a local server.

  Read the article

• Nagios remote monitoring: NRPE Vs. SSH

  - by sam

  We use Nagios to monitor quite a few (~130) servers. We monitor CPU, Disk, RAM and a few other things on each server. I've always used SSH to run the remote commands, purely because it requires little to no additional config on the remote server, just install nagios-plugins, create the nagios user and add the SSH key, all of which I've automated into a shell script. I've never actually considered the performance implications of using SSH over NRPE. I'm not too bothered about the load hit on the Nagios server (It's probably over-speced for what it does, it's never been over 10% CPU), but we run each remote check every 30 seconds and each server has 5 different checks performed. I assume SSH requires more resources for each check but is there a huge difference? (I.E. enough of a difference to warrant the switch to NRPE). If it's any help, we monitor a mix of physical servers (Normally with 8, 12 or 16 physical cores) and Amazon EC2 medium/large instances.

  Read the article

• Key modifiers affect remote VNC sessions in OS X

  - by Michael

  I have two concurrent users of my MacBook: one local (with local peripherals) and one remote (connecting via VNC to a user kept logged in with fast user switching). As described here http://macosx.com/forums/howto-faqs/52547-howto-simultaneous-user-environments-via-vnc.html That's working fine, except that when I hit modifier keys (e.g. shift, option, ...), I also affect the remote user. For example, if I hold down shift, the remote user's key strokes are capitalised, and if I hold down option, they get strange glyphs instead of the normal letters. Does anyone have any idea what could be causing this, or how to fix it?

  Read the article

• Out of nowhere, ssh_exchange_identification: Connection closed by remote host

  - by disusered

  I am running Ubuntu 10.10 on a remote box. I ssh to it everyday without issues but today out of the blue, I get the following error: ssh_exchange_identification: Connection closed by remote host If I connect with -vv, I get the following: OpenSSH_5.6p1, OpenSSL 0.9.8r 8 Feb 2011 debug1: Reading configuration data /Users/bla/.ssh/config debug1: Applying options for ubuntu-server debug1: Reading configuration data /etc/ssh_config debug1: Applying options for * debug2: ssh_connect: needpriv 0 debug1: Connecting to ubuntu-server.com [123.123.123.123] port 22. debug1: Connection established. debug2: key_type_from_name: unknown key type '-----BEGIN' debug2: key_type_from_name: unknown key type '-----END' debug1: identity file /Users/bla/.ssh/id_rsa type -1 debug1: identity file /Users/bla/.ssh/id_rsa-cert type -1 ssh_exchange_identification: Connection closed by remote host If I remove the key, I get the exact same output (sans "debug2: key_type_...). I've managed to log in physically and checked my hosts.allow and hosts.deny but they have no entries. I tried removing and reinstalling OpenSSH, checked authorized_keys and ~/.ssh permissions and tried connecting from other computers only to get the same error. I'm at my wits end, any help would be greatly appreciated.

  Read the article

• software to view logs on remote server

  - by Tarun

  I have configured syslog server on my linux machine like this Linux Machine (syslog client) -- Linux Machine (syslog server) I have configured it and its working properly. Now, the problem is I want to look at the logs located on remote server in a particular directory for example /var/log/host-ip/httpd.log. One way is that I use ssh for that and then see those logs using commands like tail etc. So is there any Browser based graphical utility which I can use on my machine in which I just give the remote folder location, ip-address etc. and the software shows me the logs present on that remote server. Thanks.

  Read the article

• Remote Assist Windows 2008 R2 Session

  - by cbergman

  As mentioned in this kb article, it is not possible to shadow a session with multiple monitors enabled. It does mention that "Remote Assistance supports multiple monitors, and is the presently recommended solution if you need this functionality." My question is, is it possible (and if so, how) to remote assist a terminal services session. We have a few Windows Server 2008 R2 Terminal Servers running with about 10 or so users that use 2 monitors. It would be ideal to be able to remote into their session but have yet to find a viable solution. Thank you.

  Read the article

• Spoof database connection to be local instead of remote

  - by spydon

  I am trying to connect one of our clients "as is" programs to a remote database instead of a local one, they say that they have coded it to be able to do it, but for some reason the program crashes when trying to connect to a remote database. I don't have the source code so I can't really dig much deeper than that and the company does not provide any upgrades or custom modifications. I can succesfully connect to the database through SqlDbx and HeidiSQL so I know that the server is set up correctly. This is why I need to find a way to spoof a remote connection on port 1433 to appear like a local database connection to the program. I thought about editing the hosts file, but it will most likely crash other programs if I bind localhost to another IP than 127.0.0.1. Any ideas?

  Read the article

• Remote access over VPN machine

  - by w_harry

  Here is my scenario. I have Comp1 which has VPN installed on it & working fine. I have made Comp1 as remote enabled as well. Now i want to log in to Comp1 ( remotely) from Comp2. Without starting the VPN, remote desktop works fine from Comp2 to Comp1. When i connect to VPN on Comp1 the remote desktop from Comp2 breaks. Is there a way i can run VPN on Comp1 and be able to access from Comp2 remotely. If there is change in settings, please advice. Regards

  Read the article

• Visual Studio ignore try catch - debug only

  - by Praesagus

  I think error handling is a good idea. :) When debugging it can get in the way - especially with nice user friendly messages. In VB6 I could just check a box for the compiler to ignore my error handling. I found the dialog that allows me to do something similar in VS, but it's about 10,000 check boxes instead of one - which is too many to change every time I want a production compilation. Is there a way to set VS up so when I am in debugging mode I get one set of conditions and when I am in production I get another? ...or is there just another method to handling errors and debugging more efficiently? Thanks

  Read the article

• What useful GDB scripts have you used/written?

  - by nik

  People use gdb on and off for debugging, of course there are lots of other debugging tools across the varied OSes, with and without GUI and, maybe other fancy IDE features. I would like to know what useful gdb scripts you have written and liked. While, I do not mean a dump of commands in a something.gdb file that you source to pull out a bunch of data, if that made your day, go ahead and talk about it. Lets think conditional processing, control loops and functions written for more elegant and refined programming to debug and, maybe even for whitebox testing Things get interesting when you start debugging remote systems (say, over a serial/ethernet interface) And, what if the target is a multi-processor (and, multithreaded) system Let me put a simple case as an example... Say, A script that traversed serially over entries to locate a bad entry in a large hash-table that is implemented on an embedded platform. That helped me debug a broken hash-table once.

  Read the article

• Python: Getting the attribute name that the created object will be given

  - by cool-RR

  Before I ask this, do note: I want this for debugging purposes. I know that this is going to be some bad black magic, but I want to use it just during debugging so I could identify my objects more easily. It's like this. I have some object from class A that creates a few B instances as attributes: class A(object): def __init__(self) self.vanilla_b = B() self.chocolate_b = B() class B(object): def __init__(self): # ... What I want is that in B.__init__, it will figure out the "vanilla_b" or whatever attribute name it was given, and then put that as the .name attribute to this specific B. Then in debugging when I see some B object floating around, I could know which one it is. Is there any way to do this?

  Read the article

• How to make pdb recognize that the source has changed between runs?

  - by user88028

  From what I can tell, pdb does not recognize when the source code has changed between "runs". That is, if I'm debugging, notice a bug, fix that bug, and rerun the program in pdb (i.e. without exiting pdb), pdb will not recompile the code. I'll still be debugging the old version of the code, even if pdb lists the new source code. So, does pdb not update the compiled code as the source changes? If not, is there a way to make it do so? I'd like to be able to stay in a single pdb session in order to keep my breakpoints and such. FWIW, gdb will notice when the program it's debugging changes underneath it, though only on a restart of that program. This is the behavior I'm trying to replicate in pdb.

  Read the article

• How to debug a website while running IIS 7?

  - by chobo2

  Hi I am running iis7 on my windows machine for testing purposes. Now I need to have access to the debugger so when something happens I can walk through it. Yet when I put debug lines on my site nothing happens. So I am guessing I need more stuff setup to make debugging to work. Everything is on the same machine. I have iis 7 on the same machine setup and I have Visual studios setup on my machine.

  Read the article

< Previous Page | 55 56 57 58 59 60 61 62 63 64 65 66  | Next Page >