Search Results

Search found 74687 results on 2988 pages for 'work from home'.

Page 59/2988 | < Previous Page | 55 56 57 58 59 60 61 62 63 64 65 66  | Next Page >

  • Wireless does not work 12.10

    - by superkoop
    My primary issue is that my wireless does not work after I installed 12.10. The output to rfkill list all: 5: hci0: Bluetooth Soft blocked: no Hard blocked: no The output to lshw -class network is: *-network description: Ethernet interface product: 88E8040 PCI-E Fast Ethernet Controller vendor: Marvell Technology Group Ltd. physical id: 0 bus info: pci@0000:09:00.0 logical name: eth0 version: 12 serial: 00:21:9b:d6:46:51 size: 100Mbit/s capacity: 100Mbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=sky2 driverversion=1.30 duplex=full ip=192.168.1.102 latency=0 link=yes multicast=yes port=twisted pair speed=100Mbit/s resources: irq:44 memory:fe8fc000-fe8fffff ioport:de00(size=256) *-network description: Network controller product: BCM4312 802.11b/g LP-PHY vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:0b:00.0 version: 01 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list configuration: driver=b43-pci-bridge latency=0 resources: irq:17 memory:fe7fc000-fe7fffff The output to lspci -nn for the pertinent information is: 0b:00.0 Network controller [0280]: Broadcom Corporation BCM4312 802.11b/g LP-PHY [14e4:4315] (rev 01) Thus, it seems the solution would be to run: sudo apt-get install linux-headers-generic sudo apt-get install --reinstall bcmwl-kernel-source sudo modprobe wl However, I do not currently have access to an ethernet connection, as I am currently only able to use verizon wireless 3g internet. Thus, is there a way to set up ICS with a Vista machine so that I can access the internet by using the Vista machine as the host? Or, is it possible to fix this by downloading the important packages in vista and moving them to ubuntu via USB drive?

    Read the article

  • Will Ubuntu work out on my mother's computer?

    - by PleaseStand
    My mother had an old Compaq desktop computer running Windows 98, which she used for occasional Web browsing and playing cards. Recently, a relative brought up a newer computer; it ran Windows XP. Unfortunately, the hard drive failed soon afterward, forcing me to reinstall the operating system. Not having the original Windows disc or product key led me to consider Ubuntu Linux. Will it work for mom? Is the hardware compatible? (Check the history of this question for the full specifications.) Would Ubuntu/Xubuntu suffice, or would I be better off buying a new copy of Windows? Is her card game (Hoyle Card Games 3) likely to run on Wine? I believe the minimum system requirement is Windows 95. Failing Wine compatibility, is running Windows 98 on VirtualBox an option on such an old computer? Are there any equally good card games for Linux? She plays mainly Bridge, Poker, and Solitaire. Is there any "Large Fonts" option for those with poor vision? Is it possible to use a serial mouse?

    Read the article

  • Can't get my graphics driver (GMA 3150) to work

    - by bracus
    I've been searching like crazy trying to find a fix for this, it's the only thing that's not completely working on my setup. I see posts where people say it should be working but it just isn't. I have a Gateway LT2802u netbook and I installed 11.10 on this 2 days ago. Everything works except for accelerated graphics. At first I couldn't watch a simple flash video at all, but somehow I got it to work. Now the last problem I have is I can't watch HD videos, my screen resolution won't go higher than 1024x600, and my under my graphics driver it says "Unknown". After doing as much research as possible, I've come to the conclusion that it's the GMA 3150 graphics driver. There is a bunch of talk on it all over the interwebs but nothing lately. I've tried the fixes that some people have used but most when I try to get the package it's no longer there or available if that makes sense. I'm loving everything Ubuntu has to offer but it'll really bite if I can't use it any more because of this problem. Does anybody have any ideas? You'd really be helping a lot.

    Read the article

  • Why won't fetchmail work all of a sudden?

    - by SirCharlo
    I ran a chmod 777 * on my home folder. (I know, I know. I'll never do it again.) Ever since then, fetchmail seems to be broken. I use it to fetch mail from an Exchange 2003 mailbox through DAVMail and OWA. The problem is that fetchmail complains about an "expunge mismatch" whenever I get a new message. It deletes the message from the Exchange mailbox, yet it never forwards it. There seems to be a problem somwhere along the mail processing, but I haven't been able to pinpoint where. Any help would be appreciated. Here are the relevant config files. ~/fetchmailrc: set no bouncemail defaults: antispam -1 batchlimit 100 poll localhost with protocol imap and port 1143 user domain\\user password Password is root no rewrite mda "/usr/bin/procmail -f %F -d %T"; ~/procmailrc: :0 * ^Subject.*ack | expand | sed -e 's/[ ]*$//g' | sed -e 's/^/ /' > /usr/local/nagios/libexec/mail_acknowledgement ~/.forward: | "/usr/bin/procmail" And here is the output when I run fetchmail -f /root/.fetchmailrc -vv: fetchmail: WARNING: Running as root is discouraged. Old UID list from localhost: <empty> Scratch list of UIDs: <empty> fetchmail: 6.3.19 querying localhost (protocol IMAP) at Tue 03 Jul 2012 09:46:36 AM EDT: poll started Trying to connect to 127.0.0.1/1143...connected. fetchmail: IMAP< * OK [CAPABILITY IMAP4REV1 AUTH=LOGIN] IMAP4rev1 DavMail 3.9.7-1870 server ready fetchmail: IMAP> A0001 CAPABILITY fetchmail: IMAP< * CAPABILITY IMAP4REV1 AUTH=LOGIN fetchmail: IMAP< A0001 OK CAPABILITY completed fetchmail: Protocol identified as IMAP4 rev 1 fetchmail: GSSAPI error gss_inquire_cred: Unspecified GSS failure. Minor code may provide more information fetchmail: GSSAPI error gss_inquire_cred: fetchmail: No suitable GSSAPI credentials found. Skipping GSSAPI authentication. fetchmail: If you want to use GSSAPI, you need credentials first, possibly from kinit. fetchmail: IMAP> A0002 LOGIN "domain\\user" * fetchmail: IMAP< A0002 OK Authenticated fetchmail: selecting or re-polling default folder fetchmail: IMAP> A0003 SELECT "INBOX" fetchmail: IMAP< * 1 EXISTS fetchmail: IMAP< * 1 RECENT fetchmail: IMAP< * OK [UIDVALIDITY 1] fetchmail: IMAP< * OK [UIDNEXT 344] fetchmail: IMAP< * FLAGS (\Answered \Deleted \Draft \Flagged \Seen $Forwarded Junk) fetchmail: IMAP< * OK [PERMANENTFLAGS (\Answered \Deleted \Draft \Flagged \Seen $Forwarded Junk)] fetchmail: IMAP< A0003 OK [READ-WRITE] SELECT completed fetchmail: 1 message waiting after first poll fetchmail: IMAP> A0004 EXPUNGE fetchmail: IMAP< A0004 OK EXPUNGE completed fetchmail: 1 message waiting after expunge fetchmail: IMAP> A0005 SEARCH UNSEEN fetchmail: IMAP< * SEARCH 1 fetchmail: 1 is unseen fetchmail: IMAP< A0005 OK SEARCH completed fetchmail: 1 is first unseen 1 message for domain\user at localhost. fetchmail: IMAP> A0006 FETCH 1 RFC822.SIZE fetchmail: IMAP< * 1 FETCH (UID 343 RFC822.SIZE 1350) fetchmail: IMAP< A0006 OK FETCH completed fetchmail: IMAP> A0007 FETCH 1 RFC822.HEADER fetchmail: IMAP< * 1 FETCH (UID 343 RFC822.HEADER {1350} reading message domain\user@localhost:1 of 1 (1350 header octets) fetchmail: about to deliver with: /usr/bin/procmail -f '[email protected]' -d 'root' # fetchmail: IMAP< fetchmail: IMAP< fetchmail: IMAP< Bonne journ=E9e.. fetchmail: IMAP< fetchmail: IMAP< Company Name fetchmail: IMAP< My Name fetchmail: IMAP< IT fetchmail: IMAP< Tel: (XXX) XXX-XXXX xXXX fetchmail: IMAP< www.domain.com=20 fetchmail: IMAP< fetchmail: IMAP< fetchmail: IMAP< -----Message d'origine----- fetchmail: IMAP< De=A0: User [mailto:[email protected]]=20 fetchmail: IMAP< Envoy=E9=A0: 2 juillet 2012 15:50 fetchmail: IMAP< =C0=A0: Informatique fetchmail: IMAP< Objet=A0: PROBLEM: photo fetchmail: IMAP< fetchmail: IMAP< Notification Type: PROBLEM fetchmail: IMAP< Author:=20 fetchmail: IMAP< Comment:=20 fetchmail: IMAP< fetchmail: IMAP< Host: Photos fetchmail: IMAP< Hostname: photo fetchmail: IMAP< State: DOWN fetchmail: IMAP< Address: XXX.XX.X.XX fetchmail: IMAP< fetchmail: IMAP< Date/Time: Mon Jul 2 15:49:38 EDT 2012 fetchmail: IMAP< fetchmail: IMAP< Info: CRITICAL - XXX.XX.X.XX: rta nan, lost 100% fetchmail: IMAP< fetchmail: IMAP< fetchmail: IMAP< ) fetchmail: IMAP< A0007 OK FETCH completed fetchmail: IMAP> A0008 FETCH 1 BODY.PEEK[TEXT] fetchmail: IMAP< * 1 FETCH (UID 343 BODY[TEXT] {539} (539 body octets) ******************************* fetchmail: IMAP< ) fetchmail: IMAP< A0008 OK FETCH completed flushed fetchmail: IMAP> A0009 STORE 1 +FLAGS (\Seen \Deleted) fetchmail: IMAP< * 1 FETCH (UID 343 FLAGS (\Seen \Deleted)) fetchmail: IMAP< * 1 EXPUNGE fetchmail: IMAP< A0009 OK STORE completed fetchmail: IMAP> A0010 EXPUNGE fetchmail: IMAP< A0010 OK EXPUNGE completed fetchmail: mail expunge mismatch (0 actual != 1 expected) fetchmail: IMAP> A0011 LOGOUT fetchmail: IMAP< * BYE Closing connection fetchmail: IMAP< A0011 OK LOGOUT completed fetchmail: client/server synchronization error while fetching from domain\user@localhost fetchmail: 6.3.19 querying localhost (protocol IMAP) at Tue 03 Jul 2012 09:46:36 AM EDT: poll completed Merged UID list from localhost: <empty> fetchmail: Query status=7 (ERROR) fetchmail: normal termination, status 7

    Read the article

  • Macbook Pro 13" Retina (10,2): Keyboard and Touchpad don't work correcltly

    - by Dirk
    I'm dealing with Ubuntu since about 5 years and installed it on several laptops. Now I'm stuck when trying to install Ubuntu 12.04.1 on a brand new Macbook Pro 13" Retina (10,2). I sucessfully can start Ubuntu from an USB stick, the Ubuntu desktop is visible, a mouse cursor is visible. But there is no respond to keyboard or touchpad input. So I cannot really install Ubuntu on the Macbook. The details of my approach: Prepare an empty USB stick Download "ISO 2 USB EFI Booter for Mac" and copy the file bootX64.efi to the USB drive as /efi/boot/bootX64.efi. Download Ubuntu 12.04.1 Desktop for Mac from http://cdimage.ubuntu.com/releases/1-amd64+mac.iso and copy the iso the USB drive as /efi/boot/boot.iso Put the USB stick into the Macbook Press and hold the "alt" button while switching the Macbook on Select "EFI Boot" from the boot menu that appears and press the Return / Enter key Immediately a black terminal screen appears with the headline "Welcome to the Ubuntu ISO << - EFI booter". 30 seconds later the familiar Ubuntu startup graphics screen is showing. Further 20 seconds later Ubuntu has started and the desktop is visible - in wonderfully fine resolution Now the computer does not respond to any actions on the touchpad nor the keyboard Who did install Ubuntu on this Macbook Pro 13" Retina (10,2) successfully? On this site https://help.ubuntu.com/community/MacBookPro this unit is not listed yet, anyway. Any help would be greatly appreciated! Dirk PS: I could now install ubuntu with an external USB Keyboard/Mouse Set. But now, after showing the grub menu, a kernel panic error appears and booting stops :-/ Seems that the ubuntu images fit not to a macbook pro retina 13" (10,2) yet. PPS: Ok, there are new facts: If I edit the boot options and enter " nomodeset noapic" ubuntu starts and Keyboard and Touchpad work! Now I have to enable WiFi... PPPS: After installing Broadcom firmware from USB Live stick as described in other posts, WiFi was enabled. Then I could update ubuntu normally to 12.10. After this, I must not enter "nomodeset noapic" in the grub menu anymore. Last Thing now is the Touchpad. The driver seems not to be there. The touch pad is only showing as mouse. t.b.c.

    Read the article

  • SQL SERVER – How to easily work with Database Diagrams

    - by Pinal Dave
    Databases are very widely used in the modern world. Regardless of the complexity of a database, each one requires in depth designing. To practice along please Download dbForge Studio now.  The right methodology of designing a database is based on the foundations of data normalization, according to which we should first define database’s key elements – entities. Afterwards the attributes of entities and relations between them are determined. There is a strong opinion that the process of database designing should start with a pencil and a blank sheet of paper. This might look old-fashioned nowadays, because SQL Server provides a much wider functionality for designing databases – Database Diagrams. When using SSMS for working with Database Diagrams I realized two things – on the one hand, visualization of a scheme allows designing a database more efficiently; on the other – when it came to creating a big scheme, some difficulties occurred when designing with SSMS. The alternatives haven’t taken long to wait and dbForge Studio for SQL Server is one of them. Its functions offer more advantages for working with Database Diagrams. For example, unlike SSMS, dbForge Studio supports an opportunity to drag-and-drop several tables at once from the Database Explorer. This is my opinion but personally I find this option very useful. Another great thing is that a diagram can be saved as both a graphic file and a special XML file, which in case of identical environment can be easily opened on the other server for continuing the work. During working with dbForge Studio it turned out that it offers a wide set of elements to operate with on the diagram. Noteworthy among such elements are containers which allow aggregating diagram objects into thematic groups. Moreover, you can even place an image directly on the diagram if the scheme design is based on a standard template. Each of the development environments has a different approach to storing a diagram (for example, SSMS stores them on a server-side, whereas dbForge Studio – in a local file). I haven’t found yet an ability to convert existing diagrams from SSMS to dbForge Studio. However I hope Devart developers will implement this feature in one of the following releases. All in all, editing Database Diagrams through dbForge Studio was a nice experience and allowed speeding-up the common database designing tasks. Download dbForge Studio now. Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, SQL Utility, T SQL

    Read the article

  • Finding work as a college student

    - by lightburst
    I'm a 3rd year CS student. I'm currently really, really, bored and tired of cheap school programming(I go to a fairly respectable(albeit not top) university in my country, but, really, it's not MIT) so I've been thinking about getting a part-time dev job for a long while now. I'm not some hotshot programmer or anything, but "Add/Delete XYZ class objects to list" or "Do this web feature/pattern in PHP" does get old after a few semesters. I also only learned(heard?) of programming when I entered college, so the duration of me being in contact with any code is short. I can't really apply as an intern as I have not accumulated the necessary credits yet to do that so I was thinking of selling myself as a part-time dev. I still need to go to school, and don't want to subject myself to living two lives. Plus, I think I'd have better chances considering my lack of things to write on the resume. The only language I know at heart is C (I've written several pointer-oriented stuff on my freshman year, which is apparently pretty leet(for some reason), or so Joel says. That sort of boosted my morale a bit) but I've worked with several other languages only for the sake of course work such as C#/Java/PHP/ASM. My only user-worthy project was a recursive quicksort simulator I wrote for class using GTK+ that used a textbox to output the progress. I also have not taken the compiler theory class yet, or my thesis. All that being said, I wonder if any legitimate software company(big or small) would hire somebody like me considering all that. If there are companies that do accept anybody like me, would I be doing programming or maybe just be a tester or something? Would anybody hire me as a dev at all? I know I don't have much(not even a degree) but what I lack in experience, I compensate with interest? I am less interested in websites and 'management' software(no offense or anything. also, most of the places here ONLY have those), and more into 'process driven'(I'm not sure how to call it) and system software. I have my eyes on a startup that sells basically an extension of Google Drive, but I feel like I'm too 'risky' for them. Oh, I'm also 19 if that means anything. We're not K-12 so kids go to college earlier than in the US.

    Read the article

  • Getting WLAN on my Laptop to work (Medion MD98300)

    - by Anand Böhmer
    Dear Ubuntu Community, I am having difficulties to get the WLAN Adapter on my Medion 98300 Laptop to work. The WLAN Card seems to be connected through an internal USB Interface and the Card itself had shown up as a wirelles Network while installing Ubuntu. I have tried a few things earlier, but none of my google reasearches have brought me to a working solution... I am quite new to the Linux System and only knoew a couple of terminal commands so far, so I probably have missed out on a few possible solutions. Maybe you can help me? Thank you very much in advance! A fre minimal technical Details: AMD Turion 64 X2 Dual-Core Mobile Technolgie TL-50 NVIDIA GeForce Go 6150 SanDisk 64GB SSD 2GB RAM DDR2 667 nForce Chipset (I forgt the Version, but deductable from the GPU I guess) WiFi: ZyDAS ZD1211B 802.11g Thank's a lot again! :) UPDATE: I tried around myself a little and found a guide on the Linux Mint forums that helped! I already had tried to install the linux backport modules etc. What I finally did was update the linux firmware and run the following command: echo "options acer_wmi wirelles=1" sudo tee /etc/modprobe.d/acer_wmi.conf and rebooted now I found and could connect to networks, but unfortunately I found, that the link quality was very bad, around 40 to 50. Eventhough my Router is running at high power and is only 6 Meters away! I then switched a few channels, but that did not improve much. Before, under Windows, I had a very good link quality and had the entire 16mbit/s internet connection at disposal, now I can only get about 3-5Mbit/s. better then nothing, but still pretty bad! The "TX power" is fixed on 20dBm and iwconfig says, that the "Power Management" is off... Maybe the power of the module is set too low?... UPDATE2: I figured that 20dBm is a normal power output. I even tried to change the power using iwconfig wlan0 txpower INTEGERHERE but, obviously my "Card" does not support more then 20. More would probably be illegal as well, so I won't even use more then 20. I guess that I will have to figure out a way, or maybe just switch cards. Are the Mailboard-USB-Connectors on a laptop of the same property as the standard external ones? If so, I could simply solder a micro Wirelless N Adapter onto the board :)

    Read the article

  • Ubuntu 12.10 graphics does not work properly

    - by madox2
    My graphic on ubuntu 12.10 does not work as well as on 12.04. After upgrade I installed driver sudo apt-add-repository ppa:ubuntu-x-swat/x-updates sudo apt-get update sudo apt-get install nvidia-current for my Nvidia 450 GTS graphics card. But sometimes I see slight lag on my videos played in VLC player, some of desktop and window effects are lagging, sometimes I can see an indescribable souce of pixels on my screen at the start of ubuntu and so on. I feel difference between 12.04 and 12.10 in favour of former version. Does anyone know whats wrong or what I am missing? here is output of lspci -k: 00:00.0 Host bridge: Intel Corporation 2nd Generation Core Processor Family DRAM Controller (rev 09) 00:01.0 PCI bridge: Intel Corporation Xeon E3-1200/2nd Generation Core Processor Family PCI Express Root Port (rev 09) Kernel driver in use: pcieport Kernel modules: shpchp 00:16.0 Communication controller: Intel Corporation 6 Series/C200 Series Chipset Family MEI Controller #1 (rev 04) Subsystem: Giga-byte Technology Device 1c3a Kernel driver in use: mei Kernel modules: mei 00:1a.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 (rev 05) Subsystem: Giga-byte Technology Device 5006 Kernel driver in use: ehci_hcd 00:1b.0 Audio device: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller (rev 05) Subsystem: Giga-byte Technology Device a000 Kernel driver in use: snd_hda_intel Kernel modules: snd-hda-intel 00:1c.0 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 1 (rev b5) Kernel driver in use: pcieport Kernel modules: shpchp 00:1c.4 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 5 (rev b5) Kernel driver in use: pcieport Kernel modules: shpchp 00:1d.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 (rev 05) Subsystem: Giga-byte Technology Device 5006 Kernel driver in use: ehci_hcd 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev a5) 00:1f.0 ISA bridge: Intel Corporation H61 Express Chipset Family LPC Controller (rev 05) Subsystem: Giga-byte Technology Device 5001 Kernel driver in use: lpc_ich Kernel modules: lpc_ich 00:1f.2 IDE interface: Intel Corporation 6 Series/C200 Series Chipset Family 4 port SATA IDE Controller (rev 05) Subsystem: Giga-byte Technology Device b002 Kernel driver in use: ata_piix 00:1f.3 SMBus: Intel Corporation 6 Series/C200 Series Chipset Family SMBus Controller (rev 05) Subsystem: Giga-byte Technology Device 5001 Kernel modules: i2c-i801 00:1f.5 IDE interface: Intel Corporation 6 Series/C200 Series Chipset Family 2 port SATA IDE Controller (rev 05) Subsystem: Giga-byte Technology Device b002 Kernel driver in use: ata_piix 01:00.0 VGA compatible controller: NVIDIA Corporation GF116 [GeForce GTS 450] (rev a1) Subsystem: CardExpert Technology Device 0401 Kernel driver in use: nvidia Kernel modules: nvidia_current, nouveau, nvidiafb 01:00.1 Audio device: NVIDIA Corporation GF116 High Definition Audio Controller (rev a1) Subsystem: CardExpert Technology Device 0401 Kernel driver in use: snd_hda_intel Kernel modules: snd-hda-intel 03:00.0 Ethernet controller: Atheros Communications Inc. AR8151 v2.0 Gigabit Ethernet (rev c0) Subsystem: Giga-byte Technology Device e000 Kernel driver in use: atl1c Kernel modules: atl1c

    Read the article

  • Problem getting GOBI 2000 HS to work

    - by Zypher
    I've been trying to get my integrated GOBI WWAN card to work under 10.10 for a while now. I was able to get the network manager to see the card after installing the gobi-loader package. I was able to setup the connection, but i cannot establish a connection to Verizon. Below is the output from /var/log/daemon.log as i try to connect. Oct 19 14:29:42 gbeech-x201 AptDaemon: INFO: Quiting due to inactivity Oct 19 14:29:42 gbeech-x201 AptDaemon: INFO: Shutdown was requested Oct 19 14:33:45 gbeech-x201 NetworkManager[1105]: <info> Activation (ttyUSB0) starting connection 'Verizon connection' Oct 19 14:33:45 gbeech-x201 NetworkManager[1105]: <info> (ttyUSB0): device state change: 3 -> 4 (reason 0) Oct 19 14:33:45 gbeech-x201 NetworkManager[1105]: <info> Activation (ttyUSB0) Stage 1 of 5 (Device Prepare) scheduled... Oct 19 14:33:45 gbeech-x201 NetworkManager[1105]: <info> Activation (ttyUSB0) Stage 1 of 5 (Device Prepare) started... Oct 19 14:33:45 gbeech-x201 NetworkManager[1105]: <info> (ttyUSB0): device state change: 4 -> 6 (reason 0) Oct 19 14:33:45 gbeech-x201 NetworkManager[1105]: <info> Activation (ttyUSB0) Stage 1 of 5 (Device Prepare) complete. Oct 19 14:33:45 gbeech-x201 NetworkManager[1105]: <info> Activation (ttyUSB0) Stage 1 of 5 (Device Prepare) scheduled... Oct 19 14:33:45 gbeech-x201 NetworkManager[1105]: <info> Activation (ttyUSB0) Stage 1 of 5 (Device Prepare) started... Oct 19 14:33:45 gbeech-x201 NetworkManager[1105]: <info> (ttyUSB0): device state change: 6 -> 4 (reason 0) Oct 19 14:33:45 gbeech-x201 NetworkManager[1105]: <info> Activation (ttyUSB0) Stage 1 of 5 (Device Prepare) complete. Oct 19 14:34:46 gbeech-x201 NetworkManager[1105]: <warn> CDMA connection failed: (32) No service Oct 19 14:34:46 gbeech-x201 NetworkManager[1105]: <info> (ttyUSB0): device state change: 4 -> 9 (reason 0) Oct 19 14:34:46 gbeech-x201 NetworkManager[1105]: <info> Marking connection 'Verizon connection' invalid. Oct 19 14:34:46 gbeech-x201 NetworkManager[1105]: <warn> Activation (ttyUSB0) failed. Oct 19 14:34:46 gbeech-x201 NetworkManager[1105]: <info> (ttyUSB0): device state change: 9 -> 3 (reason 0) Oct 19 14:34:46 gbeech-x201 NetworkManager[1105]: <info> (ttyUSB0): deactivating device (reason: 0). Oct 19 14:34:46 gbeech-x201 NetworkManager[1105]: <info> Policy set 'Auto SO-GUEST' (wlan0) as default for IPv4 routing and DNS. Oct 19 14:34:46 gbeech-x201 NetworkManager[1105]: <info> Policy set 'Auto SO-GUEST' (wlan0) as default for IPv4 routing and DNS.

    Read the article

  • glTranslate, how exactly does it work?

    - by mykk
    I have some trouble understanding how does glTranslate work. At first I thought it would just simply add values to axis to do the transformation. However then I have created two objects that would load bitmaps, one has matrix set to GL_TEXTURE: public class Background { float[] vertices = new float[] { 0f, -1f, 0.0f, 4f, -1f, 0.0f, 0f, 1f, 0.0f, 4f, 1f, 0.0f }; .... private float backgroundScrolled = 0; public void scrollBackground(GL10 gl) { gl.glLoadIdentity(); gl.glMatrixMode(GL10.GL_MODELVIEW); gl.glTranslatef(0f, 0f, 0f); gl.glPushMatrix(); gl.glLoadIdentity(); gl.glMatrixMode(GL10.GL_TEXTURE); gl.glTranslatef(backgroundScrolled, 0.0f, 0.0f); gl.glPushMatrix(); this.draw(gl); gl.glPopMatrix(); backgroundScrolled += 0.01f; gl.glLoadIdentity(); } } and another to GL_MODELVIEW: public class Box { float[] vertices = new float[] { 0.5f, 0f, 0.0f, 1f, 0f, 0.0f, 0.5f, 0.5f, 0.0f, 1f, 0.5f, 0.0f }; .... private float boxScrolled = 0; public void scrollBackground(GL10 gl) { gl.glMatrixMode(GL10.GL_MODELVIEW); gl.glLoadIdentity(); gl.glTranslatef(0f, 0f, 0f); gl.glPushMatrix(); gl.glMatrixMode(GL10.GL_MODELVIEW); gl.glLoadIdentity(); gl.glTranslatef(boxScrolled, 0.0f, 0.0f); gl.glPushMatrix(); this.draw(gl); gl.glPopMatrix(); boxScrolled+= 0.01f; gl.glLoadIdentity(); } } Now they are both drawn in Renderer.OnDraw. However background moves exactly 5 times faster. If I multiply boxScrolled by 5 they will be in sinc and will move together. If I modify backgrounds vertices to be float[] vertices = new float[] { 1f, -1f, 0.0f, 0f, -1f, 0.0f, 1f, 1f, 0.0f, 0f, 1f, 0.0f }; It will also be in sinc with the box. So, what is going under glTranslate?

    Read the article

  • Permission denied: /home/.htaccess pcfg_openfile: unable to check htaccess file

    - by phoebebright
    This domain was working this morning, now I get a 403 error and the message above in my error log. I'm not using .htaccess files but I have been doing some copy on the server so may have messed things up but no changes to this domain (unless by accident!). What is this pcfg_openfile thing anyway? Done lots of googleing but none of the solutions seemed to fit these circumstances. Server is ubuntu Hardy Heron.

    Read the article

  • Home networking problem between power line communication and Ethernet

    - by pixeline
    My network runs through the electrical wiring of the house and is organised as such: Groundfloor: an ADSL+network switch, using DHCP (address : 172.19.3.1) (Mac) PCs connected via an electrical adapter (model: D-Link DHP-200) (1 per PC) First Floor: 1 switch (8 ports) connected via an electrical adapter (model: D-Link DHP-200) (address unknown) 2 Mac PCs connected (via RJ45 network wires) to that router using DHCP The Problem On the first floor, file tranfers between PCs are fast and perfect. But if I try to transfer files from or to a computer on the ground floor, the speed is slow and eventually the transfer dies out. The Question So I suspect the 1st floor switch is creating some kind of barrier (firewall?) preventing external PCs from accessing the PCs it is connected to? Am I right and if so, how could I disable that barrier?

    Read the article

  • WRTU54G-TM T-Mobile@Home router with 3rd party firmware

    - by dlamblin
    I've been doing a lot of reading online about the Linksys WRTU54G-TM router model that I now own. It seems getting a custom firmware onto it is not a problem. But no one is talking about retaining the Voip features (yet). So far they're all disappointed that it's not a SIP machine and used GSM over IPSec. Personally I don't care about using it with non-t-mobile. If I take the original firmware, shouldn't I be able to extract it, and it's SquashFS image, and then move all of the t-mobile specific binaries for enabling the calling features over to a custom firmware installation (maybe OpenWRT)? You might ask why, and the reason is, that if I do this I could retain my calling features, which I do want, and ssh to the router and use it to run additional software, as any OpenWRT router could do. Does anyone know if this can be done, and how the firmware's binaries could be gotten at and installed correctly?

    Read the article

  • DNS Piority in home-use Routers

    - by DucDigital
    Force DNS on router instead of ClientSide DNS like OpenDNS or GooglePublicDNS Im trying to implement some site blocking using DNS, the hardware is simple Routers like Linksys and Netgear that you use in house for family purpose. Currently I tried to set a computer to opendns, while my router set to something else, when check using opendns.com/welcome, the computer is identified as opendns. and Vice versa, this time the computer didn't identified as opendns. Is it posible to force user to use our DNS instead of their setting DNS?

    Read the article

  • DNS Piority in home-use Routers

    - by DucDigital
    Force DNS on router instead of ClientSide DNS like OpenDNS or GooglePublicDNS Im trying to implement some site blocking using DNS, the hardware is simple Routers like Linksys and Netgear that you use in house for family purpose. Currently I tried to set a computer to opendns, while my router set to something else, when check using opendns.com/welcome, the computer is identified as opendns. and Vice versa, this time the computer didn't identified as opendns. Is it posible to force user to use our DNS instead of their setting DNS?

    Read the article

  • Home CAT6 wiring: CMR vs CMP?

    - by Eddie Parker
    I'm planning on wiring my house with CAT6 cable. I'm finding a large jump in price between CMR and CMP cabling, and I'm confused by what counts as a 'plenum' and what does not. As I'm wiring my house, I'm planning on going through interior (hollow) walls, and through the attic and crawlspace to get to the points I wish to wire. I will be going between floors at one point, which leads me to believe I need at least CMR, and obviously CMP wouldn't hurt either. I don't mind spending the extra money if I need to, but is it overkill going for CMP if the bulk of the wires are either going vertical, or through a crawlspace or attic?

    Read the article

  • Vista home basic, "this folder is empty" problem

    - by peter m
    When I access my itunes folder in "my music" I see most but not all artist folders, when I access any of them I get "this folder is empty", When in Itunes all music plays and if I right click on a song and click show in folder I can see my full Itunes folder, so far I have done two system restores, scan disk, windows memory scan, defrag and tried ifixit. nothing has worked, I dont understand how I can see two different folders at the same address. Also have checked hidden files settings.

    Read the article

  • Ripping a home video VCD on Linux or Windows with VLC or otherwise

    - by user259774
    I have a VCD with 22 minutes of video on it. I would like to retain this footage and throw away the VCD. I can play the whole thing with VLC ("open disc - vcd - /dev/sr0 - play"): all 22 minutes of the main track. I don't believe there's any other content aside from the main track. I can seek to anywhere I want to within the 22 minute track. If I mount /dev/sr0 /media/vcd and then try to copy the only file from the MPEGAV folder, I get an I/O error, with an empty destination file. VLC has a "convert" option in addition to "play". When I use this I actually get a good OGG file back, after it runs through the video in painful real-time. I guess it dubs it frame-by-frame. But the file is only 10 minutes long, leaving 12 minutes off of the track. Handbrake doesn't detect it's track titles, unfortunately. I don't know if I should start getting involved with GNU ddrescue or if it's because VCDs somehow encode their data sectors differently. Anyway, I'm in way over my head and if anyone knows how I could get that video track off the thing, feel free to share! Edit: I should note that I also have access to a Windows computer

    Read the article

  • Multiple home routers

    - by netvope
    Suppose I have the following configuration: Router A: WAN port connected to the Internet, LAN = 192.168.1.0/24 Computer A: Connected to router A as 192.168.1.101 Router B: WAN port connected to router A as 192.168.1.102, LAN = 192.168.2.0/24 Computer B: Connected to router B as 192.168.2.101 Now I want computer A to communicate with computer B seamlessly (e.g. can establish a TCP connection by running nc 192.168.2.101 <port>) by means of routing, rather than merging the two networks into one (which can be easily accomplished using router B as a switch). Most routers are shipped with NAT turned on, of which I definitely need to turn off in router B. But what other steps do I need to take so that packets from computer A to computer B would go through router B? I could manually add a routing table entry in computer A so that all packets targeted to 192.168.2.0/24 go through gateway 192.168.1.102, but I would prefer an automatic way if it exist.

    Read the article

  • Multiple home routers

    - by netvope
    Suppose I have the following configuration: Router A: WAN port connected to the Internet, LAN = 192.168.1.0/24 Computer A: Connected to router A as 192.168.1.101 Router B: WAN port connected to router A as 192.168.1.102, LAN = 192.168.2.0/24 Computer B: Connected to router B as 192.168.2.101 Now I want computer A to communicate with computer B seamlessly (e.g. can establish a TCP connection by running nc 192.168.2.101 <port>) by means of routing, rather than merging the two networks into one (which can be easily accomplished using router B as a switch). Most routers are shipped with NAT turned on, of which I definitely need to turn off in router B. But what other steps do I need to take so that packets from computer A to computer B would go through router B? I could manually add a routing table entry in computer A so that all packets targeted to 192.168.2.0/24 go through gateway 192.168.1.102, but I would prefer an automatic way if it exist.

    Read the article

  • Windows 7 and Vista Home Networked-Unable to login from Vista to Windows 7

    - by Lynn
    I set up both Vista and Windows 7 on the same workgroup. I can view Windows 7 from Vista and vice versa. I can login into Vista from Windows 7. I am unable to login to Windows 7 from Vista. When I enter the Windows 7 User name and Password on Vista, the following information appears: Logon unsuccessful: Windows is unable to log you on. Be sure that your user name and password are correct. Both are correct. Do you have any idea how I can resolve this logon issue? Thank you, Lynn

    Read the article

  • Dual Home HP Server running Win2003

    - by Colm
    Hello everyone. I'm new to server dual homing. I have a HP ProLiant DL360 G4p running Win2003 with 2 NICs , only one is currently active. I'd like to activate the 2nd NIC connected (in a active/passive state) to a 2nd switch with only one IP address and ideally only one mac layer address. The 1st switch is a Cisco 2960G and the 2nd is a Cisco C3560G. There are VLANS, RSTP and PAGP in use already. Can someone give me an idea, in broad terms , of what technology/protocols I should be investigating (HSRP, SLB Teaming etc.) ? I can provide more info if needed. Thanks, Colm.

    Read the article

  • I can't externally access my home server's wordpress website

    - by piratepartypumpkin
    Basically, I can access everything just fine using 127.0.0.1, but if I use my external IP (123.123.123.123), I get page not found. My router is port forwarding HTTP port 80 to port 8080 on my servers internal IP address. In other words: (Application: HTTP | Start: 80 | End: 8080 | Protocol: Both | IP Address 192.168.0.101 | Enable [YES]) I know it's forwarding properly, because when I stop port forwarding, I can access my router page by using my external IP. My virtual hosts file is: NameVirtualHost *:80 <VirtualHost *:80> DocumentRoot /opt/lampstack-5.3.16-0/apps/wordpress ServerName example.com ServerAlias www.example.com </VirtualHost> and my httpd.conf file is: Listen 80 Servername localhost:80 DocumentRoot "/opt/lampstack-5.3.16-0/apache2/htdocs <Directory /> Options FollowSymLinks AllowOverride None Order deny, allow deny from all </Directory> <Directory "/opt/lampstack-5.3.16-0/apache2/htdocs"> Options FollowSymLinks AllowOverride None Order allow, deny allow from all </Directory>

    Read the article

< Previous Page | 55 56 57 58 59 60 61 62 63 64 65 66  | Next Page >