Search Results

Search found 28963 results on 1159 pages for 'ubuntu on arm'.

Page 592/1159 | < Previous Page | 588 589 590 591 592 593 594 595 596 597 598 599  | Next Page >

  • external usb hard drive is not being seen anymore

    - by incrediblehulk
    I think my problem is a little different than several other similar titled questions. Everything started while I was using 10.10. External drive was always recognized and mounted, but the timing of this differed. I mean when I booted, the OS sometimes saw the drive immediately, sometimes after a few minutes, sometimes after hours. Although this was annoying, I tolerated this somehow. Then this problem persisted after I upgraded to 11.04 with a clean install. Afterwards, the drive became totally invisible to the OS. It is not even detected as an usb device anymore. However, there is one thing I can do to make it seen. If I boot to another operating system which can detect the drive, and then boot back to ubuntu, everything is perfect. but this is of course very impractical. To summarize, the usb drive is recognized by ubuntu if and only if another OS in the same computer could recognize it first. I should also say I have not had any problems with the same drive in any other OS or a different computer. My drive is philips with a hitachi hdd inside, has its own power source and any other usb powered drives have never caused this kind of a problem. I've tried almost all recommendations in similar topics but none of them seems to be related to this one. What can I possibly do to fix this?

    Read the article

  • "Unmet Dependencies" problem when trying apt-get install

    - by GChorn
    Anytime I try to install python packages using the command: sudo apt-get install python-package I get the following output: Reading package lists... Done Building dependency tree Reading state information... Done You might want to run 'apt-get -f install' to correct these: The following packages have unmet dependencies: linux-headers-generic : Depends: linux-headers-3.2.0-36-generic but it is not going to be installed linux-headers-generic-pae : Depends: linux-headers-3.2.0-36-generic-pae but it is not going to be installed linux-image-generic : Depends: linux-image-3.2.0-36-generic but it is not going to be installed E: Unmet dependencies. Try 'apt-get -f install' with no packages (or specify a solution). This seems to have started when these same three packages showed up in Ubuntu's Update Manager and kicked an error when I tried to install them there. Based on the suggestion in the output above, I tried running: sudo apt-get -f install But this only gave me several instances of the following error: dpkg: error processing /var/cache/apt/archives/linux-image-3.2.0-36-generic_3.2.0-36.57_i386.deb (--unpack): unable to create `/lib/modules/3.2.0-36-generic/kernel/drivers/net/wireless/ath/carl9170/carl9170.ko.dpkg-new' (while processing `./lib/modules/3.2.0-36-generic/kernel/drivers/net/wireless/ath/carl9170/carl9170.ko'): No space left on device Now maybe I'm way off-base here, but I'm wondering if the error could be coming from the "No space left on device" part? The thing is, I'm running Ubuntu as a VirtualBox VM but I've got it set to dynamically increase its virtual hard drive space as needed, so why am I still getting this error? Here's my output when I use dh -f: Filesystem Size Used Avail Use% Mounted on /dev/sda1 6.9G 5.7G 869M 88% / udev 494M 4.0K 494M 1% /dev tmpfs 201M 784K 200M 1% /run none 5.0M 0 5.0M 0% /run/lock none 501M 76K 501M 1% /run/shm VB_Shared_Folder 466G 271G 195G 59% /media/sf_VB_Shared_Folder When I perform sudo apt-get -f install and the system says, After this operation, 192 MB of additional disk space will be used. Does that mean 192 MB of my virtual machine's current memory, or 192 MB on top of the rest of my free space? As I said, my machine normally dynamically allocates additional memory from the host machine, so I don't see why there would be memory restrictions at all...

    Read the article

  • Having trouble installing Bradcom STA driver

    - by user192881
    I just installed Ubuntu and love it so much, its so fast now. But I have a problem connecting to the internet. I checked and saw I have to install the driver Broadcom STA wireless driver but every time I do try to install it it says: Sorry, installation of this driver failed. Please have a look at the log files for details: /var/log/jockey.log I went to the terminal and copy and pasted the log file name. and when I did it, it said I have no permission to access this file. I checked on the forums that I have to be on a wired connection. So I plugged my laptop into my router and I got internet then tried to install the driver again. And it was loading then when it got to the end the same message popped up. Also I have one of those little USB router things you plug into the computer and it gives you internet I have been using that but its to slow. So I want to use the one in my computer but cant. Also I tried the command: sudo modprobe wl and when i type that command in it says: FATAL: Module wl not found Also I'm using Ubuntu 12.04

    Read the article

  • No sound, can't adjust alsamixer volume

    - by user734613
    I have no sound on my ubuntu and I do not know why. I saw a lot of posts about that, I tried a lots of solutions that I found (especially this one) but it still does not work. I suspect alsamixer. I can't adjust the sound. http://img15.hostingpics.net/pics/447765Screenshotfrom20120621140430.png I tried to reinstall alsa mixer using this tutorial but it seems the package does not exist anymore. E: Unable to locate package linux-alsa-driver-modules-3.2.0-25-generic E: Couldn't find any package by regex 'linux-alsa-driver-modules-3.2.0-25-generic' Here are my configuration: cat /proc/driver/nvidia/version NVRM version: NVIDIA UNIX x86_64 Kernel Module 295.40 Thu Apr 5 21:37:00 PDT 2012 GCC version: gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) aplay -l List of PLAYBACK Hardware Devices ** card 0: NVidia [HDA NVidia], device 3: HDMI 0 [HDMI 0] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: NVidia [HDA NVidia], device 7: HDMI 1 [HDMI 1] Subdevices: 1/1 Subdevice #0: subdevice #0 grep eld_valid /proc/asound/NVidia/eld* /proc/asound/NVidia/eld#0.0:eld_valid 0 /proc/asound/NVidia/eld#0.1:eld_valid 0 Thanks in advance for your help.

    Read the article

  • Getting error - This application has failed to start because the application configuration is incorrect. Reinsta

    - by Kaye
    I am sorry if I am repeating this issue. But I am a layman and cant understand the answers posted. I want to do away with Windows XP Professional (I have lost the product key) that I have on an old desktop PC that is more than 7/8 years old. I didnt use the PC for a couple of years as this laptop was more convenient. Now I have started to use this PC but cannot download SP2 onto the PC as it keeps asking for product key and I dont remember where I wrote it down or where I kept it. So I downloaded Ubuntu 12.10 onto the desktop screen (about 753MB and 3 hours) and then used Unetbootin to put this on my pendrive. After completing the process, I have on my pendrive 9 folders, 3 text files, 1 autorun file, 1 ldlinux file, 1 wubi application file and 5 other files - total 20 items. Though on bootup I opted for USB boot, the boot-up opens into Windows. It simply bypasses the USB where ubuntu lies. What do I do? Am I doing things correctly. Pls explain in simple terms.

    Read the article

  • How do I uninstall the TuxOnIce kernel in 12.04?

    - by Lluis
    I recently installed tuxonice on a Toshiba z830. I have ubuntu 12.04 (kernel was: 3.2.0-26) I wanted to be able to hibernate, which I consider to be a basic thing a OS should allow you to do. Well, it didn't work...but they already tell you it may not so I removed it. For doing all these I followed: Problem with Hibernation After uninstalling I switched off the laptop and after this I started to have several problems. The first one was that Cisco VPN didn't work anymore and then I realised that I could not even suspend my laptop. I found very strange that after removing tuxonice I still had this: /lib/modules/3.2.0-26-generic-tuxonice/ The VPN problem could be solved by just copying from my previous kernel: 3.2.0-26-generic/CiscoVPN/ into the tuxonice one. Not very elegant but works. Now, for the suspend problem (and the previous too) I can hold Shift when starting and select my old kernel and then suspend works again. In my opinion tuxonice was not correctly uninstalled as it left that kernel behind and worse: ubuntu uses it if I do not take action. I have these work arounds....and here is my question: how can I delete this tuxonice kernel safely? If you need more info please let me know.

    Read the article

  • How to solve Fatal error: Call to undefined function readline()? readline library not found?

    - by SirBT
    I have an Ubuntu 12.04 LTS. And XAMPP for linux 1.7.7. When I code in php with and call the readline function I get this error message? "Fatal error: Call to undefined function readline()" I recently found the below thread which pointed out the name of the package that contained the desired readline: How to solve configure: error: readline library not found? I went ahead and installed # apt-get install libreadline6. But this didnt seem to make a difference. I still get the same error message: "Fatal error: Call to undefined function readline()". Was the thread missing further steps? Can anyone help me? I am new to Ubuntu. <?php echo "Simple menu \n" ; echo "1. Play Sports \n"; echo "2. Play Strategy games \n"; $userInput = readline('Enter something here: '); ?>

    Read the article

  • NetworkManager detects no networks with a RTL8188CE

    - by Cormac O'Brien
    I'm on a 2011 Lenovo Thinkpad T420i with a Realtek RTL8188CE WiFi adapter. Here's the scenario: I pop in the Ubuntu LiveCD to install. Laptop detects all networks in range, I connect to my home network, internet working great. Once Ubuntu finishes installing, the home network I am connected to is the only one which appears in the applet list. Upon restarting or waking from suspend, NetworkManager does not detect any networks – it simply displays "Disconnected" under the Wireless Network section of the menu. I am able to connect to my home network by using the "Connect to Hidden Wireless Network" option and it works immediately. I have yet to test if this works with other SSIDs. I have tried reinstalling the entire OS as well as NetworkManager and my wireless drivers. For hardware info, I ran: cormac@cormac-T420:~$ sudo lshw -c network Here is the output for my wireless card: *-network description: Wireless interface product: RTL8188CE 802.11b/g/n WiFi Adapter vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:03:00.0 logical name: wlan0 version: 01 serial: d0:df:9a:08:73:50 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=rtl8192ce driverversion=3.2.0-26-generic firmware=N/A ip=192.168.1.138 latency=0 link=yes multicast=yes wireless=IEEE 802.11bgn resources: irq:17 ioport:5000(size=256) memory:f2500000-f2503fff I can provide more information if required. This was not a problem in Natty or Oneiric. I hope this can be fixed, I don't want to have to ask for an SSID wherever I need to connect.

    Read the article

  • What version was installed? x64 or i686? What's the difference exactly?

    - by Seppo
    Okay, so heres my problem. I recently started migrating several services to individual VMs on my box, using VirtualBox 4.1. I created a new VirtualBox VM with guest type "Ubuntu (64 Bit)". I've already done this before and it worked like a charm. I then installed unbutu server (12.04) from the exact same dvd image. All the time I thought that it should have installed x64. I already put a few hours work into the new VM, migrating the webserver and mail system etc. Today I tried installing a x64 piece of software and it suddenly told me that it needed x64 and I had only i686. I checked uname -a and this is what it gave me: Linux hostname 3.2.0-29-generic-pae #46-Ubuntu SMP Fri Jul 27 17:25:43 UTC 2012 i686 i686 i386 GNU/Linux Any guesses what went wrong? All the time I was thinking I had a x64 system. Any way to move to a "real" x64? I have a second VM on this host which is running x64 just fine .. P.S.: grep --color=always -iw lm /proc/cpuinfo returns lm among the flags.

    Read the article

  • No text in working indicator-messages after enabling different icons depending on the status

    - by user106750
    My indicator-messages has some problems. As you can see in the image, there appears no text. The indicator is working correctly, if there is some income, a number will appear in its proper place or I will be able to see the minutes passed after I got an email, but still no information. As you can see in the picture, I changed the envelope icon for the status one. I configured it as is indicated in http://www.omgubuntu.co.uk/2012/08/ubuntu-add-new-message-indicator-icons, with the indicator changing depending on the status. But I modified it so I see the bubble. The bubble gets the arrow when I'm absent, for example, or an "X" of I'm disconnected, and also turns blue if there an income. I believe the problem is related with this new indicator. The first days, it was working fine, but then the text dissapeared. I've tried uninstalling and reinstalling the packet, with no success. I'm using ubuntu 12.10 64bits with Unity. Someone has an idea how to fix this? I would prefer conserving the characteristic of having different icons. Thanks a lot!!! Image here: http://i.stack.imgur.com/Ucgi4.png

    Read the article

  • Is my graphics card in use or not?

    - by Lindhe94
    I have a Samsung Series 7 NP730U3E which is running Ubuntu Gnome 13.10. This computer have an Intel Core i5 3337U an AMD Radeon HD 8570M on the inside. Ubuntu 13.10 is said to have driver support for this graphics card, but I am not sure whether or not this is the case. When I check System Settings Details it says "Graphics: Intel® Ivybridge Mobile" and lspci | grep VGA returns VGA compatible controller: Intel Corporation 3rd Gen Core processor Graphics Controller (rev 09). But lshw -c video returns *-display description: Display controller product: Mars [Radeon HD 8730M] vendor: Advanced Micro Devices, Inc. [AMD/ATI] physical id: 0 bus info: pci@0000:01:00.0 version: 00 width: 64 bits clock: 33MHz capabilities: pm pciexpress msi bus_master cap_list rom configuration: driver=radeon latency=0 resources: irq:47 memory:e0000000-efffffff memory:f7e00000-f7e3ffff ioport:e000(size=256) memory:f7e40000-f7e5ffff *-display description: VGA compatible controller product: 3rd Gen Core processor Graphics Controller vendor: Intel Corporation physical id: 2 bus info: pci@0000:00:02.0 version: 09 width: 64 bits clock: 33MHz capabilities: msi pm vga_controller bus_master cap_list rom configuration: driver=i915 latency=0 resources: irq:46 memory:f7800000-f7bfffff memory:d0000000-dfffffff ioport:f000(size=64) What is the case? Is my graphics card is use, or do my laptop have undiscovered powers yet to yield?

    Read the article

  • Oneric Aspire One. After latest 11.10 update to Linux 3.0.0-9 boot hangs at staement "Starting Bluetooth"

    - by hevh
    I have today updated the version of Linux on Ubuntu on my Acer Aspire One. The boot hangs on the statement "Starting Bluetooth". Help please!! EDIT1: I get the grub menu when I start the netbook and it doesn´t matter which version of linux I choose the resulkt is the same. It gets as far as the Ubuntu spash screen then drops into command line mode then hangs on the line "Starting Bluetooth". I can log in and have tried various forms of the apt-get command to fix the system but with no result. I do not need bluetooth at the moment and so could remove the application if I knew how. (have tried apt-get remove bluez). When I use the command sudo apt-get -f install I get an error message saying "There's not enough space in /var/lib/mysql/" folowed by several other error messages. I have spent some time looking for similar problems and solutions using google but so far got to nothing to help. Thanks EDIT2: I have since discovered when running Knoppix or slitaz from a usb stick that the file managers report the hard disc as having no space. However GPARTED reports it as having 3.69gb. I do recall making space on the hard drive by deleting some old files and emptying trash whilst the update was running; perhaps its related. Any suggestions for how I can recover the apparently lost space from hard disc without losing the data. I have backups of the actual data but do not wnat to lose the applcations configuration. Thanks Kev

    Read the article

  • need a different backup solution

    - by DigitalJedi
    I just built a new media/backup server using Ubuntu 12.04 64bit. I installed a hard drive to be used only for music, pictures, and videos and formatted it fat32 so my 1 and only Windows PC could map those folders as netshares. My laptop, also running Ubuntu 12.04, is what I am using the most so new media is first downloaded on my laptop. I've already got the music, videos, and pictures folders from my server mounting as shares on my laptop on boot thanks to some fstab edits and sshfs. Now I'm wanting either an app or script that could backup any new files I add to my local media folders to the mounted folders on my server. I've been Googling all day and found a few apps like rsync but they seem to have issues with ext4 to vfat backups. I thought maybe a script would be best but I'm new to scripting in Linux and don't want to mess anything up. Basically I am looking for something that will backup only newly added files to the server. I figure I could schedule it once a week. There are some stipulations. For example, my local music folder has over 700 folders for each artist/band then sub folders inside those for albums. I want something smart enough to only copy newly added content so I'm guessing the modified date would probably be a good condition if I were scripting. I'm rambling. Any suggestions would be GREATLY appreciated. I'm not finding anything to suit my needs. I'm almost to the point of just learning bas scripting so I can write something but then it will be a couple weeks or so before I have a possible solution and I'd like something in place sooner.

    Read the article

  • Installing Chrome Java Plugin

    - by kyleskool
    I've been trying to install the Java plugin for Chrome for a couple hours now, and I figured it was time to ask people with more experience. I can't seem to get it working. My current Java version is the 64-bit OpenJDK 1.6.0_24. I tried installing the IcedTea plugin to no avail. I have Ubuntu 12.04 64-bit installed at the moment. When I tried testing if java was enabled in Chrome, any website with a Java applet would not load (when I disabled the plugin, they loaded, but not the applet). I followed the instructions from here: http://technonstop.com/install-java-plugin-ubuntu-linux which said to create this script and run it: JAVA_HOME=/usr/lib/jvm/jdk1.7.0 MOZILLA_HOME=~/.mozilla mkdir $MOZILLA_HOME/plugins ln -s $JAVA_HOME/jre/lib/i386/libnpjp2.so $MOZILLA_HOME/plugins Note: You may need to change the value of JAVA_HOME so that it correctly points to your installation of the JDK. 64-bit users will need to change the final line to: ln -s $JAVA_HOME/jre/lib/amd64/libnpjp2.so $MOZILLA_HOME/plugins but this did not work as well. I just test it in Firefox and it's working. Still nothing for Chrome

    Read the article

  • Lighter in CPU/Memory Usage: Lubuntu or Xubuntu

    - by Luis Alvarado
    I am looking for an Ubuntu version that consumes less Memory and CPU. I have read both Lubuntu and Xubuntu (The homepages, wikipedia, phoronix and other sites comparing both). But from experience, which one uses less memory and is less CPU intensive. I need to install them in very old hardware and want to persuade the owner of the hardware of the benefits of Ubuntu. in this case I want to install 11.10 or 12.04 when it comes out. How are each behaving in those versions? The 2 PCs I will be installing either Xubuntu or Lubuntu are: Granpa PC: CPU - Pentium 2 450Mhz RAM - 64MB DIMM Video - 16MB Used for - Documents and Internet. No listening to music, no looking at videos. Just using it for document writing. The other old meat: CPU - Pentium 3 550Mhz RAM - 128MB DIMM Video - 16MB Used for - Documents and Internet also but they want.. or maybe they are wishing for it to use it to see movies and listen to music. This one has internet. The other one does not.

    Read the article

  • Cant make my site available to the internet

    - by user1683645
    Hi I'm using ubuntu as server OS for my webhosting but I'm having problem redirecting my domainname to my server Here are my /etc/hosts file and /etc/apache2/sites-available/mysite file. hosts file: 127.0.0.1 www.lowkey.se The following lines are desirable for IPv6 capable hosts ::1 ip6-localhost ip6-loopback fe00::0 ip6-localnet ff00::0 ip6-mcastprefix ff02::1 ip6-allnodes ff02::2 ip6-allrouters sites-available/file: ServerAdmin webmaster@localhost ServerName www.lowkey.se DocumentRoot /var/www/doost/ <Directory /> Options FollowSymLinks AllowOverride None </Directory> <Directory /var/www/doost/> Options Indexes FollowSymLinks MultiViews AllowOverride None Order allow,deny allow from all </Directory> ScriptAlias /cgi-bin/ /usr/lib/cgi-bin/ <Directory "/usr/lib/cgi-bin"> AllowOverride None Options +ExecCGI -MultiViews +SymLinksIfOwnerMatch Order allow,deny Allow from all </Directory> ErrorLog ${APACHE_LOG_DIR}/error.log # Possible values include: debug, info, notice, warn, error, crit, # alert, emerg. LogLevel warn CustomLog ${APACHE_LOG_DIR}/access.log combined And a screenshot from my domain name provider: http://imgur.com/VyqBR the site has been enabled in ubuntu, I've restarted apache2 and the folder /var/www/doost/ is there. What am i doing wrong?

    Read the article

  • Can't install GTX 680 drivers on 12.04

    - by user68945
    I recently installed Ubuntu 12.04 on my desktop. I have three monitors, and after installing, ubuntu only detected one at 1080p. I downloaded the driver from the nvidia website, but when I stop lightdm and try to run the driver, it gives me an error message: ERROR: Unable to find the kernel source tree for the currently running kernel. Please make sure you have installed the kernel source files for your kernel and that they are properly configured; on Red Hat Linux systems, for example, be sure you have the 'kernel-source' or 'kernel-devel' RPM installed. If you know the correct kernel source files are installed, you may specify the kernel source path with the '--kernel-source-path' command line option. I tried instead to install the driver via the terminal, with the X ppa. The installation seemed to work, but when I rebooted, my display was at 640x480 resolution, with no other options for resolution. The NVIDIA X Server settings program is there now, but when I run it, it simply tells me that I don't seem to be using their driver, and that I should run nvidia-xconfig as root. Doing so doesn't help, I simply get the same issue again. I checked the file at /etc/X11/xorg.conf, and it's an NVIDIA file (has nvidia in the header). Does anyone know something else I can try? EDIT: Forgot to mention, I tried installing drivers via the "Additional Drivers" GUI utility, there were two options, one of them marked "(post-release updates)". I tried both of them, in both cases it tried to download and install for a while, then said that there was an error, and that a description could be found at /var/log/jockey.log. Both logs were over 700 lines

    Read the article

  • Why does my system slow down or freeze when there is heavy disk activity?

    - by user72270
    Im a first-time user to Ubuntu-12.04 with WUBI installation. My NoteBook Information : Dell vostro 3450 : i5 2410m, 3 gb ram, intel hd3000, amd 6630m hybrid. Surfing and playing games works flawlessly, however, I'm having huge problems when installing applications and generally copying and moving files. When doing so, system is significantly slower and freezes quite often (Firefox gets bluish, sometimes even black n white). I would say that Ubuntu allocates too much resources on file transfers and installing, but even these tasks are very slow. Here is very specific example : today, i tried to move 6 GB file from win 7 installation. It was good at first, i jumped to firefox but after a while firefox started to randomly turn bluish and mouse was randomly stopping working. It was gradually worse and worse and it got to a point when firefox black n whited and mouse wasn't working at all. I raged and went for some meal, when i got back screen was black. It probably unlogged me due to inactivity, when i pushed random button to bring screen to life i had to wait few minutes to let it show me only my screen background. No log in screen, just background and working mouse. NoteBook fan was working at 100 % so I assumed that file transfer was going on and I left it to work. Nothing then changed for a full hour so I hard rebooted it. File transfer unsuccessful, It transfered hardly 2 gigs. Is this normal ? What to do in these situations ? It didn't let me load system manager and not even terminal. Thanks.

    Read the article

  • Crackling sound from right laptop speaker

    - by user1880405
    This problem lasts for several months already (first on Ubuntu 13.10, not on 12.04. I get very loud cracking/popping sound from my right Asus K56C's speaker, I searched everything but could not get rid of it. Several facts: There is no problem on Windows 8. It has nothing to do with applications running because it appears even before login screen of Ubuntu. Also same problem if I boot from Live USB. Muting sound will remove noise, but lowering volume has no effect. Inserting any headphones, removes the noise. If I disconnect power cable while there is noise, noise will always disappear, but only if there is no music playing. If I start playing music, noise again appear even with power cable disconnected. Sometimes that noise disappears for 1-4 weeks, and then again appears for no reason and lasts from several days to weeks. That noise is always the same, and I tried adding tsched=0 to /etc/pulse/default.pa. Also tried this PositionReporting fix, with no effect. I also tried disconnecting all the cables and removing all electronic devices around laptop, but it has no effect. I also tried removing Pulse Audio, didn't change anything. Would be great if someone has some real solution for this problem.

    Read the article

  • Hard-drive will randomly fail to load GRUB. Booting a live USB/CD fixes the issue temporarily

    - by Usagi
    I am running 12.04 64-bit and am dual booting with Win7, for full disclosure, although I suspect that has nothing to do with my problem. Occasionally the boot-loader(GRUB) will fail to load and I will be presented with a black screen with a single blinking line. There is no apparent pattern although I suspect there is one and it is related to a program I am running. This has happened to me eight out of ten power cycles now and I can fix it consistently, however, I have no idea why it happens. My current fix is to boot a live CD (I've tried both KNOPPIX and Ubuntu with the same result) and that's it. Somehow booting with the live CD is enough to "wake-up" my hard drive. I then reboot and GRUB magically appears again. So what is going on? Is it possible that a program is corrupting my MBR and the live CD is restoring it? How can I narrow down the possibilities? Thanks. Additional: This is still a problem. I'm convinced now that it is not hardware related as I've spent the last month and several boot cycles on Windows without a hiccup. Recently when I started using Ubuntu again the problem started again. I am more interested in figuring out what is going on rather than actually fixing the problem. Are there any tools, logs, etc. I can use to unravel this mystery?

    Read the article

  • Desktop runs very slick, animations are all fast and flawless. Moving windows around, however, is very laggy. Why?

    - by Muu
    This isn't a question about Ubuntu being laggy in general - not at all, in fact, it's very slick and fast for me. Clicking the "Workspace Switcher" in the dock performs the animation immediately and very smoothly. Switching between workspaces with the arrow keys - again, flawlessly. My computer has a resolution of 2560x1440 on a 27" display (no, not an Apple product - though my monitor has the same panel that Apple use in their cinema displays). It's powered by an Nvidia GeForce GTX 470 - easily enough to handle it - and an Intel i3. Hardware is not the issue. I am running Ubuntu 11.10 (upgraded from 11.04). I had the same issue in 11.04. I'm running the "NVIDIA accelerated graphics driver (post-release updates) (version current-updates)" from the additional drivers dialogue. Two drivers have been suggested to me via that dialogue and I've tried both - same effect with each. The driver is "activated and currently in use". Any other information required, let me know and I'll post it. I'm a programmer who works with Linux daily (both as a job and as an interest) so technical instructions are fine. I've noticed that Compiz uses a lot of CPU when moving windows around and it's memory usage is relatively high (though possibly expected for Compiz): 1671 user 20 0 478m 286m 33m S 1 7.3 12:44.05 compiz And one more thing - occasionally moving windows around is fast. But it only happens when all applications are closed, and even then it sometimes doesn't. Something must be interfering, but what? I'll try and find out but in the meantime, any suggestions are much appreciated :-)

    Read the article

  • Visually recognise active window

    - by mcaleaa
    Ubuntu 13.04 I work with two monitors, usually with lots of different windows open. I don't like to use the mouse, so swap between applications using alt-tab usually. The problem comes when I want to type something into an application. I need the active application to immediately obvious, usually so that I can tell which monitor to look at next. With default ubuntu (with appearance = ambiance), the only real visual indication of a window being active is that the header bar of the application is in a lighter font color. This is too subtle for me, so I find myself alt-tabbing and moving my mouse too much when switching applications, then clicking around with the mouse to give a particular window the focus. I want my switching to be more accurate, and for that I think I need better feedback on what window has the focus. This needs to be more obvious than it is now. I looked at the high contrast appearance, and it helps somewhat, but the inconsistency in the icon sets is far too distracting. I think what I need is a something like a bright border right around the window, or something like that, to make the active window really stand out. Or, maybe to have the non-active windows fade to the background a bit. I would appreciate tips on how others overcome this problem, to make the active window stand out visually from the other windows. Thank you!

    Read the article

  • Distribution upgrade (12.04 -> 14.04 LTS) halted while unpacking/installing packages

    - by Bob Sully
    As the title states...it just stopped unpacking/installing. "Preparing to unpack .../lirc_0.9.0-0ubuntu5_amd64.deb ..." then stopped in its tracks. Everything else is still running. The update manager process is still alive; if I hit ctrl-c, it gives me the warning message about leaving the system in a broken state. Also, if I run top, there is a process called "trusty" which is still running. I have NOT killed either process. lsb_release -a gives: LSB Version: core-2.0-amd64:core-2.0-noarch:core-3.0-amd64:core-3.0-noarch:core-3.1-amd64:core-3.1-noarch:core-3.2-amd64:core-3.2-noarch:core-4.0-amd64:core-4.0-noarch Distributor ID: Ubuntu Description: Ubuntu 14.04.1 LTS Release: 14.04 Codename: trusty I assume that if I try to restart update-manager, I won't be offered the option to upgrade again. Anyone have a way I can get the update-manager/dist-upgrade process to simply finish the upgrade? Thanks!

    Read the article

  • Extended display - nightmare

    - by user206343
    I have been struggling for quite a while, and I hope one of you can shed some lights on my issue. I am using Xubuntu 13.10 (Ubuntu 12.04LTS behaves the same way, higher version wouldn't install, LinuxMint didn't install, Fedora didn't install). I am trying to set extend display for two dell monitors 1900x1200. It works great when in mirror mode, but I just cannot extend the display. Either one monitor goes to sleep and the other is unresponsive, or both work but are unusable. This is a link to the picture of my monitors in mirror mode This is link showing what happens after I try to extend the desktop I get the same results if I use aRandr or the built in configuration utility. I have an ATI Radeon X300 card. I cannot use proprietary Catalyst drivers (I would have to use the legacy ones, which would force me into using much older version of the OS). Extension is possible with Windows. I am hoping someone can come up with tweaks that would allow me to run an extended desktop. I truly love Xubuntu (and Ubuntu, unfortunately, Unity is a bit too heavy for my old PC, and I have to run in 2D mode, so 12.04 is as high as I can go). I have tried everything I could find online, but nothing worked thus far. I believe some configuration or something I am missing might work. Please, if you have any idea, do not hesitate. Thanks guys.

    Read the article

  • For photography use, is Unity is overheating my laptop? Should I try OpenSuse instead?

    - by SoT
    I am a perfect noob here in the Linux world. Previously was using Windows 7. Mine is an HP laptop - Intel core2duo T5470 @ 1.60GHz × 2 / 965GM with 2GB RAM. I installed Ubuntu 12.04TLS and is quite liking it's display. I really recognized it is 3D before knowing it was Unity 3D interface. My uses are image editing, home uses, downloads, browsing etc.. No video-editing/gaming at all. Being a Photography enthusiast I use image editing programs fairly more. But I am now feeling my laptop is getting a bit overheated - processor and hard-disk. I tried lm-sensor and could not make out much of it. Installed Xsensors.7. It gives the same output as lm-sensors gave me. It gives temperature for 4 things Temp1, temp2, temp3, and temp4. For "acpitz". Please guide me in this. However I wanted to ask something more. Which one is better for working with images - photography I mean - openSUSE 12.1 or Ubuntu with unity 3D? Can I get the display quality with the openSUSE distribution? I heard for laptops openSUSE uses power more efficiently, is there any truth? Please suggest me whether I should try openSUSE or not. If so with which GUI? KDE or GNOME? Thanks in advance. Regards SoT

    Read the article

< Previous Page | 588 589 590 591 592 593 594 595 596 597 598 599  | Next Page >