Search Results

Search found 18728 results on 750 pages for 'setup deployment'.

Page 596/750 | < Previous Page | 592 593 594 595 596 597 598 599 600 601 602 603  | Next Page >

• Custom MS-DOS / FreeDOS

  - by user1801387

  Goal : Build a custom DOS to boot into. To automate tasks like formating a drive, or doing recovery. I've been using Grub4DOS to boot into these images. So far I've looking into taking a windows repair disk ISO and extracting. I can't seem to find the autoexec.bat in the disk. I really don't know where to look for the startup configuration file to change or how to add an autoexec.bat. I've tried MS-DOS 6.22. But it lacks the diskpart tool I require. I've tried extracting the images and adding it. Then I got a boot failed. I assume that after i added it. All the files when to lower case names and I assume that the OS is case sensitive. Then I've looking into using FreeDOS. But I don't know how it works at all. Partially because I can't seem to grasp the help/wiki's information. I looked into getting a bearbones release with just the kernel and I think it's the config.sys file. But I don't have any idea on how the packaging system works to incorporate diskpart into it. So really I'm in general looking for a small bootable DOS to where I can incorporate diskpart and setup an autoexec.bat for the actual function to carry out and to boot into. Thanks :) This is just for personal use also.

  Read the article

• Installing mod_pagespeed (Apache module) on CentOS

  - by Sid B

  I have a CentOS (5.7 Final) system on which I already have Apache (2.2.3) installed. I have installed mod_pagespeed by following the instructions on: http://code.google.com/speed/page-speed/download.html and got the following while installing: # rpm -U mod-pagespeed-*.rpm warning: mod-pagespeed-beta_current_x86_64.rpm: Header V4 DSA signature: NOKEY, key ID 7fac5991 [ OK ] atd: [ OK ] It does appear to be installed properly: # apachectl -t -D DUMP_MODULES Loaded Modules: ... pagespeed_module (shared) And I've made the following changes in /etc/httpd/conf.d/pagespeed.conf Added: ModPagespeedEnableFilters collapse_whitespace,elide_attributes ModPagespeedEnableFilters combine_css,rewrite_css,move_css_to_head,inline_css ModPagespeedEnableFilters rewrite_javascript,inline_javascript ModPagespeedEnableFilters rewrite_images,insert_img_dimensions ModPagespeedEnableFilters extend_cache ModPagespeedEnableFilters remove_quotes,remove_comments ModPagespeedEnableFilters add_instrumentation Commented out the following lines in mod_pagespeed_statistics <Location /mod_pagespeed_statistics> **# Order allow,deny** # You may insert other "Allow from" lines to add hosts you want to # allow to look at generated statistics. Another possibility is # to comment out the "Order" and "Allow" options from the config # file, to allow any client that can reach your server to examine # statistics. This might be appropriate in an experimental setup or # if the Apache server is protected by a reverse proxy that will # filter URLs in some fashion. **# Allow from localhost** **# Allow from 127.0.0.1** SetHandler mod_pagespeed_statistics </Location> As a separate note, I'm trying to run the prescribed system tests as specified on google's site, but it gives the following error. I'm averse to updating wget on my server, as I'm sure there's no need for it for the actual module to function correctly. ./system_test.sh www.domain.com You have the wrong version of wget. 1.12 is required.

  Read the article

• Forcing a particular SSL protocol for an nginx proxying server

  - by vitch

  I am developing an application against a remote https web service. While developing I need to proxy requests from my local development server (running nginx on ubuntu) to the remote https web server. Here is the relevant nginx config: server { server_name project.dev; listen 443; ssl on; ssl_certificate /etc/nginx/ssl/server.crt; ssl_certificate_key /etc/nginx/ssl/server.key; location / { proxy_pass https://remote.server.com; proxy_set_header Host remote.server.com; proxy_redirect off; } } The problem is that the remote HTTPS server can only accept connections over SSLv3 as can be seen from the following openssl calls. Not working: $ openssl s_client -connect remote.server.com:443 CONNECTED(00000003) 139849073899168:error:140790E5:SSL routines:SSL23_WRITE:ssl handshake failure:s23_lib.c:177: --- no peer certificate available --- No client certificate CA names sent --- SSL handshake has read 0 bytes and written 226 bytes --- New, (NONE), Cipher is (NONE) Secure Renegotiation IS NOT supported Compression: NONE Expansion: NONE --- Working: $ openssl s_client -connect remote.server.com:443 -ssl3 CONNECTED(00000003) <snip> --- SSL handshake has read 1562 bytes and written 359 bytes --- New, TLSv1/SSLv3, Cipher is RC4-SHA Server public key is 1024 bit Secure Renegotiation IS NOT supported Compression: NONE Expansion: NONE SSL-Session: Protocol : SSLv3 Cipher : RC4-SHA <snip> With the current setup my nginx proxy gives a 502 Bad Gateway when I connect to it in a browser. Enabling debug in the error log I can see the message: [info] 1451#0: *16 peer closed connection in SSL handshake while SSL handshaking to upstream. I tried adding ssl_protocols SSLv3; to the nginx configuration but that didn't help. Does anyone know how I can set this up to work correctly?

  Read the article

• rsyslog - template - regex data for insertion into db

  - by Mike Purcell

  I've been googling around the last few days looking for a solid example of how to regex a log entry for desired data, which is then to be inserted into a database, but apparently my google-fu is lacking. What I am trying to do is track when an email is sent, and then track the remote mta response, specifically the dsn code. At this point I have two templates setup for each situation: # /etc/rsyslog.conf ... $Template tpl_custom_header, "MPurcell: CUSTOM HEADER Template: %msg%\n" $Template tpl_response_dsn, "MPurcell: RESPONSE DSN Template: %msg%\n" # /etc/rsyslog.d/mail if $programname == 'mail-myapp' then /var/log/mail/myapp.log if ($programname == 'mail-myapp') and ($msg contains 'X-custom_header') then /var/log/mail/test.log;tpl_custom_header if ($programname == 'mail-myapp') and ($msg contains 'dsn=') then /var/log/mail/test.log;tpl_response_dsn & ~ Example log entries: MPurcell: CUSTOM HEADER Template: D921940A1A: prepend: header X-custom_header: 101 from localhost[127.0.0.1]; from=<[email protected]> to=<[email protected]> proto=ESMTP helo=<localhost>: headername: message-id MPurcell: RESPONSE DSN Template: D921940A1A: to=<[email protected]>, relay=gmail-smtp-in.l.google.com[2607:f8b0:400e:c02::1a]:25, delay=2, delays=0.12/0.01/0.82/1.1, dsn=2.0.0, status=sent (250 2.0.0 OK 1372378600 o4si2828280pac.279 - gsmtp) From the CUSTOM HEADER Template I would like to extract: D921940A1A, and X-custom_header value; 101 From the RESPONSE DSN Template I would like to extract: D921940A1A, and "dsn=2.0.0"

  Read the article

• TCP: Address already in use exception - possible causes for client port? NO PORT EXHAUSTION

  - by TomTom

  Hello, stupid problem. I get those from a client connecting to a server. Sadly, the setup is complicated making debugging complex - and we run out of options. The environment: *Client/Server system, both running on the same machine. The client is actually a service doing some database manipulation at specific times. * The cnonection comes from C# going through OleDb to an EasySoft JDBC driver to a custom written JDBC server that then hosts logic in C++. Yeah, compelx - but the third party supplier decided to expose the extension mechanisms for their server through a JDBC interface. Not a lot can be done here ;) The Symptom: At (ir)regular intervals we get a "Address already in use: connect" told from the JDBC driver. They seem to come from one particular service we run. Now, I did read all the stuff about port exhaustion. This is why we have a little tool running now that counts ports and their states every minute. Last time this happened, we had an astonishing 370 ports in use, with the count rising to about 900 AFTER the error. We aleady patched the registry (it is a windows machine) to allow more than the 5000 client ports standard, but even then, we are far far from that limit to start with. Which is why I am asking here. Ayneone an ide what ELSE could cause this? It is a Windows 2003 Server machine, 64 bit. The only other thing I can see that may cause it (but this functionality is supposedly disabled) is Symantec Endpoint Protection that is installed on the server - and being capable of actinc as a firewall, it could possibly intercept network traffic. I dont want to open a can of worms by pointing to Symantec prematurely (if pointing to Symantec can ever be seen as such). So, anyone an idea what else may be the cause? Thanks

  Read the article

• Internet doesn't work when enable local Lan

  - by rakesh yadav

  We have the following network setup: A) Router IP 192.168.51.49 B) Windows Server 2008 R2 with dual NIC: B1) WAN interface (192.168.0.2) ( Used for internet) B2) LAN interface (192.168.1.2) ( used for local connectivity) when i keep both LAN Enabled than my internet doesn't work, but if I disabled my local Lan than internet working fine. so please help me how can resolved this issue or should i need to do routing on my server Please find the below attached route print result C:\Users\Administrator>route print =========================================================================== IPv4 Route Table =========================================================================== Active Routes: Network Destination Netmask Gateway Interface Metric 0.0.0.0 0.0.0.0 192.168.51.49 192.168.51.50 276 0.0.0.0 0.0.0.0 192.168.30.227 192.168.30.228 266 192.168.30.224 255.255.255.240 On-link 192.168.30.228 266 192.168.30.228 255.255.255.255 On-link 192.168.30.228 266 192.168.30.239 255.255.255.255 On-link 192.168.30.228 266 192.168.51.48 255.255.255.240 On-link 192.168.51.50 276 192.168.51.50 255.255.255.255 On-link 192.168.51.50 276 192.168.51.63 255.255.255.255 On-link 192.168.51.50 276 127.0.0.0 255.0.0.0 On-link 127.0.0.1 306 127.0.0.1 255.255.255.255 On-link 127.0.0.1 306 127.255.255.255 255.255.255.255 On-link 127.0.0.1 306 202.56.230.5 255.255.255.255 192.168.51.49 192.168.51.50 21 202.56.230.6 255.255.255.255 192.168.51.49 192.168.51.50 21 192.168.26.124 255.255.255.255 192.168.51.49 192.168.51.50 21 224.0.0.0 240.0.0.0 On-link 127.0.0.1 306 224.0.0.0 240.0.0.0 On-link 192.168.51.50 276 224.0.0.0 240.0.0.0 On-link 192.168.30.228 266 255.255.255.255 255.255.255.255 On-link 127.0.0.1 306 255.255.255.255 255.255.255.255 On-link 192.168.51.50 276 255.255.255.255 255.255.255.255 On-link 192.168.30.228 266 =========================================================================== Persistent Routes: Network Address Netmask Gateway Address Metric 0.0.0.0 0.0.0.0 192.168.30.227 Default 0.0.0.0 0.0.0.0 192.168.51.49 Default ===========================================================================

  Read the article

• CNAME redirect to Wordpress blog not working (.htaccess problem)

  - by Vincent Chan

  I have two domains hosting in two different servers: domain1.com & domain2.com I would like to forward "blog.domain1.com" to "blog2.domain2.com" which is a Wordpress blog using CNAME redirect. Before I installed Wordpress. blog.domain1.com (=redirect=) blog2.domain2.com/index.htm (working fine) The browser will keep the URL (http://blog.domain1.com) even the index.htm is on domain2.com server. However, after I installed Wordpress, the browser will change the URL to (http://blog2.domain2.com) This is my current setup: On domain1.com DNS: blog.domain1.com CNAME redirect to domain2.com on domain2.com .htaccess: Options +FollowSymLinks RewriteEngine On RewriteCond %{HTTP_HOST} ^blog\.domain1\.com RewriteRule ^(.*)$ http://blog2.domain2.com/$1 [R=301,L] on blog2.domain2.com .htaccess: DirectoryIndex index.php <IfModule mod_rewrite.c> Options +FollowSymLinks RewriteEngine On RewriteBase /blog2/ RewriteCond %{REQUEST_FILENAME} !-f RewriteCond %{REQUEST_FILENAME} !-d RewriteRule . /blog2/index.php [L] </IfModule> blog2.domain2.com is installed under domain2.com/blog2/ All I want to do is keeping the URL (blog.domain1.com) unchanged for the whole Wordpress redirect. Thanks a lot.

  Read the article

• Error - "IR Hardware not detected" - but it's installed/working

  - by Robert

  I am trying to do: Settings-TV-Set up TV signal. During this process I am getting the error "IR Hardware not detected." With the remote, I can select the "try again" button (to re-detect) and it tries again, so the remote works. Plugging in the "IR blaster" doesn't change anything. (I wouldn't expect any difference, but I read a post which said you needed that. I will get Media Center to change channels if I can get that working - but first things first.) I was able to do the setup months ago when I had cable. and everything was fine. I just got DirecTV. (BTW - During the above process, Media Center detects the signal coming in on channel 3. Windows XP Media Center SP3. The TV Tuner card is a Pinnacle TCTV HD PCI. Everything - and I mean everything - has the latest firmware and drivers - as of 4 months ago when I fixed a different problem. So I DON"T WANT TO HEAR the standard answer to check drivers/firmware. THANK YOU.) Thanks for any help.

  Read the article

• Can't install MailParse on cpanel server

  - by Tom

  Hi, I've got a linux vps running CentOs 5.5 (cpanel/whm), I've installed MailParse via Module Installers section on whm, and it did install it, the end of setup log: running: make INSTALL_ROOT="/root/tmp/pear-build-root/install-mailparse-2.1.5" install Installing shared extensions: /root/tmp/pear-build-root/install-mailparse-2.1.5/usr/lib/php/extensions/no-debug-non-zts-20090626/ running: find "/root/tmp/pear-build-root/install-mailparse-2.1.5" | xargs ls -dils 508718 4 drwxr-xr-x 3 root root 4096 Feb 6 21:08 /root/tmp/pear-build-root/install-mailparse-2.1.5 508745 4 drwxr-xr-x 3 root root 4096 Feb 6 21:08 /root/tmp/pear-build-root/install-mailparse-2.1.5/usr 508746 4 drwxr-xr-x 3 root root 4096 Feb 6 21:08 /root/tmp/pear-build-root/install-mailparse-2.1.5/usr/lib 508747 4 drwxr-xr-x 3 root root 4096 Feb 6 21:08 /root/tmp/pear-build-root/install-mailparse-2.1.5/usr/lib/php 508748 4 drwxr-xr-x 3 root root 4096 Feb 6 21:08 /root/tmp/pear-build-root/install-mailparse-2.1.5/usr/lib/php/extensions 508749 4 drwxr-xr-x 2 root root 4096 Feb 6 21:08 /root/tmp/pear-build-root/install-mailparse-2.1.5/usr/lib/php/extensions/no-debug-non-zts-20090626 508744 196 -rwxr-xr-x 1 root root 193502 Feb 6 21:08 /root/tmp/pear-build-root/install-mailparse-2.1.5/usr/lib/php/extensions/no-debug-non-zts-20090626/mailparse.so Build process completed successfully Installing '/usr/lib/php/extensions/no-debug-non-zts-20090626/mailparse.so' install ok: channel://pecl.php.net/mailparse-2.1.5 Extension mailparse enabled in php.ini The mailparse.so object is not in /usr/local/lib/php/extensions/no-debug-non-zts-20090626 Now, when i try to use mailparse functions using php i get the following error: PHP Warning: PHP Startup: Unable to load dynamic library '/usr/local/lib/php/extensions/no-debug-non-zts-20090626/mailparse.so' - /usr/local/lib/php/extensions/no-debug-non-zts-20090626/mailparse.so: cannot open shared object file: No such file or directory in Unknown on line 0 What should i do?

  Read the article

• How to make working TFTP server on CentOS 6.2

  - by Dima

  I'm trying to setup TFTP server on CentOS 6.2. The /etc/xinet.d/tftp configuration file is the following: service tftp { disable = no socket_type = dgram protocol = udp wait = yes user = root server = /usr/sbin/in.tftpd server_args = -s /tftpboot -vvv per_source = 11 cps = 100 2 flags = IPv4 } The selinux and firewall are disabled. The /etc/hosts.allow and /etc/hosts.deny files are empty. When I'm trying to get a file from the TFTP server, the file transfer always failed and I see the following errors into /var/log/messages Jul 11 03:16:53 localhost xinetd[4155]: xinetd Version 2.3.14 started with libwrap loadavg labeled-networking options compiled in. Jul 11 03:16:53 localhost xinetd[4155]: Started working: 1 available service Jul 11 03:17:00 localhost xinetd[4155]: START: tftp pid=4157 from=192.168.10.3 Jul 11 03:17:00 localhost in.tftpd[4158]: RRQ from 192.168.10.3 filename 1 Jul 11 03:17:00 localhost in.tftpd[4158]: sending NAK (0, Permission denied) to 192.168.10.3 Jul 11 03:17:01 localhost in.tftpd[4159]: RRQ from 192.168.10.3 filename 1 Jul 11 03:17:01 localhost in.tftpd[4159]: sending NAK (0, Permission denied) to 192.168.10.3 Jul 11 03:17:03 localhost in.tftpd[4160]: RRQ from 192.168.10.3 filename 1 The tftpboot directory permissions are (output of the ls -l command): drw-rw-rw-. 3 root root 4096 Jul 11 03:32 tftpboot I also see that the tftpboot directory is shown (by ls -l) with green background (unlike other files/directories) (Why? As I know the green background is for sticky bit only). What I did wrong? How can I make TFTP server working?

  Read the article

• HTTP responses curl and wget different results

  - by Fab

  To check HTTP response header for a set of urls I send with curl the following request headers foreach ( $urls as $url ) { // Setup headers - I used the same headers from Firefox version 2.0.0.6 $header[ ] = "Accept: text/xml,application/xml,application/xhtml+xml,"; $header[ ] = "text/html;q=0.9,text/plain;q=0.8,image/png,*/*;q=0.5"; $header[ ] = "Cache-Control: max-age=0"; $header[ ] = "Connection: keep-alive"; $header[ ] = "Keep-Alive: 300"; $header[ ] = "Accept-Charset: ISO-8859-1,utf-8;q=0.7,*;q=0.7"; $header[ ] = "Accept-Language: en-us,en;q=0.5"; $header[ ] = "Pragma: "; // browsers keep this blank. curl_setopt( $ch, CURLOPT_URL, $url ); curl_setopt( $ch, CURLOPT_USERAGENT, 'Googlebot/2.1 (+http://www.google.com/bot.html)'); curl_setopt( $ch, CURLOPT_HTTPHEADER, $header); curl_setopt( $ch, CURLOPT_REFERER, 'http://www.google.com'); curl_setopt( $ch, CURLOPT_HEADER, true ); curl_setopt( $ch, CURLOPT_NOBODY, true ); curl_setopt( $ch, CURLOPT_RETURNTRANSFER, true ); curl_setopt( $ch, CURLOPT_FOLLOWLOCATION, true ); curl_setopt( $ch, CURLOPT_HTTPAUTH, CURLAUTH_ANY ); curl_setopt( $ch, CURLOPT_TIMEOUT, 10 ); //timeout 10 seconds } Sometimes I receive 200 OK which is good other time 301, 302, 307 which I consider good as well, but other times I receive weird status as 406, 500, 504 which should identify an invalid url but when I open it on the browser they are fine for example the script returns http://www.awe.co.uk/ => HTTP/1.1 406 Not Acceptable and wget returns wget http://www.awe.co.uk/ --2011-06-23 15:26:26-- http://www.awe.co.uk/ Resolving www.awe.co.uk... 77.73.123.140 Connecting to www.awe.co.uk|77.73.123.140|:80... connected. HTTP request sent, awaiting response... 200 OK Does anyone know which request header I am missing or adding in excess?

  Read the article

• Can grub and BCD work simultaneously?

  - by wuputah

  Here's my setup. After I installed a new SSD, I have: Original Windows 7 on sdc1 (to be retired) Copy of Windows 7 on sdb2 A Windows system partition on sdb1 Ubuntu 12.04 on sda, /boot and ergo grub is on sda1 Grub is MBR on sda and set to boot from BIOS. I prefer to not change this; grub is much preferable as a boot manager. I've run update-grub from Ubuntu and grub seems to be correctly configured as all options are available: I can boot any of the 3 Windows partitions and Ubuntu. I also ran the repair tool to get Windows to add both installations to BCD. At present, choosing particular options seem to have no effect; the old version of Windows on sdc1 always boots. I don't understand what is causing this, but I can't figure out what. How does grub and BCD play along? I can't find any docs on this. My thought was to only boot Windows off sdb1, and then let BCD do the rest (present a menu to boot between sdb2 and sdc1, but I can't seem to get BCD to boot sdb2), but this has been unsuccessful. My configuration files: BCDEdit output grub.cfg

  Read the article

• How to sync two computers using new MobileMe calendar

  - by CesarGon

  I have been using MobileMe for over a year with success. I use it to sync my Outlook calendars in my work and home computers, using Windows 7 and Outlook 2007. The main Outlook calendar folder in my work computer is replicated to MobileMe as "Work", and synced to my home computer, and the main calendar folder in my home computer is replicated to MobileMe as "Home", and synced to my work computer. This means that I can see both "Work" and "Home" calendars from both computers (as well as from the web interface through me.com), which is very convenient. Yesterday I migrated to the new MobileMe calendar, accepting the suggestion that popped up on the me.com website. After the migration, the MobileMe control panel on each of Windows computers asked me to re-configure my calendar setup, and everything fell apart. The "Home" and "Work" calendar folders in Outlook are now ignored by MobileMe, and new ones named "Home in MobileMe" and "Work in MobileMe" have been created, and placed in a separate Outlook data file rather than the default. This means that now: I now have four folders, two of which are not replicated to MobileMe The two folders that are not replicated reside on a separate data file, so alarms and reminders don't work; they're basically useless to me as calendar folders In addition, the button in the MobileMe Control Panel that used to let me specify what MobileMe folder should be synced against the default Outlook folder has gone. MobileMe is now too smart. Do you have any idea how to undo this mess and go back to a situation where I have two folders, as described in the top paragraph, which keep synced? I don't want an extra data file. Thanks.

  Read the article

• Simple options for port forwarding to a different port?

  - by Nick

  I have three network printers at our local office, all of which listen on port 9100. Non of them offer the option of changing the listening port. We have a single public static IP address, and access to our main network is through a Linksys WRT-54G. We need to be able to print to these printers from outside the office. The problem is, with the 54G, I can only forward a port to the SAME port on a particular IP address. What I really need though is a way to forward to an ip address and a DIFFERENT port. I need to do this: In port Destination 9100 192.168.1.1 : 9100 9101 192.168.1.2 : 9100 9102 192.168.1.3 : 9100 So I'm looking for options. I could setup an old computer with two network cards and IPtables I suppose, but that seems like a lot of overhead for something relatively simple. Is there a way a virtual machine (read: one network card) could do the advanced port forwarding? Where I forward all traffic to it, and it forwards it on to the right printer? Or what about those mini Linux distros that replace the WRT-54G's firmware? Do any of those support what I need "out of the box"? I have a spare WRT- could I make it an IP tables router? Recommendations for mini distros? Or is there an off-the-shelf product that does this (cheap/local preferred)? Any advice / options appreciated. Thanks!

  Read the article

• TV won't go into standby

  - by Robert

  When I select Start-Turn off computer-Standby the 'turn off computer' option window closes, and then nothing else happens. I can start new applications, and Windows acts like I never selected standby. I ran it for several hours after that. If I have a TV program scheduled to record when I select standby I get a window (the Pinnacle TV software) asking if I'm sure, there are programs scheduled to record - and the computer just keeps running after I select yes, never going into standby. I added that detail as it shows the standby process is starting. [This problem also happens if a TV program is not scheduled, so the scheduler task in not running/in memory. This problem happens regardless of whether I'm not watching TV. This problem happens regardless of whether Media Center is running (it usually isn't, I'm using Pinnacle to watch TV).] I looked at "How to troubleshoot hibernation and standby issues in Windows XP" http://support.microsoft.com/kb/907477 - ACPI is enabled, and "standby" is an option in "Power Options Properties." So it appears to be setup correctly. Windows XP SP3 Media Center Edition, all current updates installed.

  Read the article

• Permissions Required for Sharepoint Backups

  - by Wyatt Barnett

  We are in the process of rolling out an extranet for some of our partners using WSS 3.0 as the platform. We already use it internally for a variety of things, and we are using the following powershell script to backup the server: param( $url="http://localhost", $backupFolder="c:\" ) [System.Reflection.Assembly]::LoadWithPartialName("Microsoft.SharePoint") $site= new-Object Microsoft.SharePoint.SPSite($url) $names=$site.WebApplication.Sites.Names foreach ($name in $names) { $n2 = "" if ($name.Length -eq 0) { $n2="ROOT" } else { $n2 = $name } $tmp=$n2.Replace("/", "_") + ".sbk" $saveas = "" if ($backupFolder.Length -eq 0) { $saveas = $tmp } else { $saveas = join-path -path $backupFolder -childPath $tmp } $site.WebApplication.Sites.Backup($name, $saveas, "true") write-host "$n2 backed up to $saveas." } This script works perfectly on the current installation running as our domain backup user. On the new box, it fails when ran as the backup user--claiming "The web application located at http://extranet/" could not be found. That url does, in fact, work so I'm fairly certain it isn't anything that dumb and rather is some permissions issue. Especially because, when executed from my security context, the script works perfectly. I have tried making the backup user a farm owner, as well as added him to the various site collection admin groups on the extranet. The one major difference between the extranet and the intranet server is that the extranet has an alternative access mapping (for https://xnet.example.com) and also uses forms authentication for that mapping. Anyhow, what permissions (or other voodoo) do I need to setup to get this script to work properly?

  Read the article

• SSL Returning Blank Page, No Catalina Errors

  - by Mr.Peabody

  This is my second, maybe third, time configuring SSL with Tomcat. Earlier I had created a self signed, which worked, and now using my signed is proving fruitless. I am using Tomcat, operating from the Amazon Linux API. When using the signed cert/keystore, my server is starting normally without errors. However, when trying to navigate to the domain it is giving me an "ERR_SSL_VERSION_OR_CIPHER_MISMATCH" error. My server.xml file looks as follows: <Connector port="8443" maxHttpHeaderSize="8192" maxThreads="150" minSpareThreads="25" maxSpareThreads="75" enableLookups="false" disableUploadTimeout="true" acceptCount="100" scheme="https" secure="true" SSLEnabled="true" clientAuth="false" sslProtocol="TLS" keystoreFile="/home/ec2-user/.keystore/starchild.jks" keystorePass="d6b5385812252f180b961aa3630df504" /> It couldn't hurt to also mention that I'm using a wildcard certificate. Please let me know if anything looks amiss! EDIT: After looking more into this, I've determined there may be nothing is wrong with the Server.xml, or the listening ports. This is becoming more of an actual certificate error, as the curl request is giving me this error: curl: (35) Unknown SSL protocol error in connection to jira.mywebsite.com:-9824 Though, I can't seem to figure out what the "-9824" is. When comparing this curl to another similar setup (using the same Wildcard Certificate) it's turning up the full handshake, which is to be expected. I believe this is now between the protocol/cypher set default on JIRA servers.

  Read the article

• Load balancing a Windows File Share using HA-Proxy

  - by NathanE

  After pulling my hair out over DFS I just had this weird and potentially dangerous idea come into my head whereby, just possibly, I might be able to use HA-Proxy to load balance a file share between servers. I've done some remedial packet traces and it does appear that TCP port 445 is the only thing involved in using Windows file sharing. I've always thought for many years that UDP 139, 135 etc were also involved in at least establishing the connection - but apparently not! So I setup a basic test: listen SMBTest *:445 mode tcp server Smb1 172.16.61.201:445 server Smb2 172.16.61.202:445 And you'll never guess what... it works??? (!) Now obviously there is the whole concern about synchronisation between the file servers (of course). That could easily be taken care of with a little bit of Robocopy script. And considering I only need a HA read-only file share there wouldn't be any issues with regard to file locking etc. Can anyone tell me if what I'm playing with here is fire? I really didn't think it would work at all and now I'm a little shocked. What would be the downsides? Could this be relied upon for a production environment?

  Read the article

• How to connect to Oracle DB via ODBC

  - by Mat

  I am attempting to connect to a remote Oracle DB via ODBC. I am totally inexperienced and fail to connect. What I have installed: Oracle 'ODBC Driver for RDB' A program I want to connect from (Altova Mapforce, an ETL) What I do: Under Administrative tools I open the Windows "ODBC Data Source Administrator I click 'Add..' and select the Oracle ODBC Driver The Window 'Oracle RDB Driver Setup' opens. I fill in: Data source name: free choice Description: I leave blank Transport: I choose TCP/IP Server: I input the IP address of the server Service: I leave 'generic' UserID: I enter the user name (that belongs to the password I have) Attach Statement: no idea what do do here?? Upon choosing 'OK', the 'Oracle RDB ODBC Driver Connect' opens and I am prompted the password. I enter the password and the connection fails. Questions Do I need further programs on my computer, e.g. the Oracle client of Instant client? I am never prompted the port of the server - isn't this relevant? I am never prompted SID - isn't this relevant? I connected from SQL developer easily - it prompted only server IP, port, username, password and SID.

  Read the article

• no mails routed to/from new Exchange 2010

  - by Michael

  I have an Exchange Server 2003 up and running for years. Now I am in the mid of transition to Exchange Server 2010, I already installed it, put the latest Servicepack on it and everything seems fine, BUT: Mails do not get delivered to MailBoxes on the new Exchange 2010. e.g. when I create a new mailbox on the old server, Emails in and out to/from it work like a charm. But as soon as I move it to the new server, emails get stuck. Noe delivered from outside or old mailboxes, not send out from the new server to enywhere. Sending between Mailboxes on the new Server of course is working. I can see the connectors between old and new Server in the Exchange 2003 Admin Tool, but I cannot find these nowhere on the new server. I have also setup sending connectors at the new server to send out mails directly, but that does not work. In all other areas, the servers are perfectly working together - moving mailboxes between, seeing each other etc. "just" they dont exchange (!) any emails - Any ideas what I missed? I also followed the hints from: Upgrading from Exchange 2003 to Exchange 2010, routing works in one direction only There Emails were transported at least in one direction, in my case they are not transported at all. Both my connectors are up and valid abd have the correct source/target shown on Get-RoutingGroupConnector | FL Kind regards Michael

  Read the article

• Help me please with this error

  - by Brandon

  I setup IIS. I moved my folder with all the files to the IIS directory. Now when I go to http://localhost/thefolder I get: An attempt was made to load a program with an incorrect format. (Exception from HRESULT: 0x8007000B) Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.BadImageFormatException: An attempt was made to load a program with an incorrect format. (Exception from HRESULT: 0x8007000B) Source Error: An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below. Stack Trace: [BadImageFormatException: An attempt was made to load a program with an incorrect format. (Exception from HRESULT: 0x8007000B)] Luxand.FSDK.ActivateLibrary(String LicenseKey) +0 FaceRecognition._Default.Page_Load(Object sender, EventArgs e) in D:\Project Details\Layne Projects\DotNet Project\FaceRecognition\FaceRecognition\Default.aspx.cs:60 System.Web.Util.CalliHelper.EventArgFunctionCaller(IntPtr fp, Object o, Object t, EventArgs e) +25 System.Web.Util.CalliEventHandlerDelegateProxy.Callback(Object sender, EventArgs e) +42 System.Web.UI.Control.OnLoad(EventArgs e) +132 System.Web.UI.Control.LoadRecursive() +66 System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +2428

  Read the article

• VMWare Workstation Linux Host performance tuning

  - by Hoghweed

  I need to improve my linux hosted vmware workstation for using multiple virtual machines at the same time. I feel very stupid I lost a great blog post link which I found last month (and I'm not able to find it again..) so I try to ask here if anyone can help me: This is my host (laptop): 16GB DDR3 Ram HDD Hybrid 750GB 7200 (8GB SSD Cache) Mint 15 x64 Kernel 3.9.7 swappiness set to 10 The above are the important things about the host. So, My need is the ability to run 2 or 3 VMs at the same time. The lack of performance is about the disk, The last time from that blog post I lost, I setup /tmp to be mounted ad a memory partition and in my previous installation that was good, now I'm not able to find a good solution to tweak the things. I think with 16GB o RAM there will be no problems to run multiple VMs, but whe they start to swap or use the /tmp things going bad (guest cursor going too fast after a freeze, guest freeze and so on) Anyone can help me to fit a good host tweak and configuration to get better performance? Thanks in advance

  Read the article

• Windows 2008 64bit: applications and explorer always hang

  - by Phil Farthing

  I setup a couple of Window 2008 64bit systems about 5 months ago. Initially all seemed well. Now however, for no apparent reason, things are dog slow, apps hang, explorer hangs, just clicking on something can cause a CPU spike of 100%, and often it's explorer that is eating it up. As I have two on identical hardware, and they experience the same problem, it doesn't seem related to addon software. The only thing these have in common is Kaspersky and I've tried disabling/uninstalling to no avail. There are no useful error messages in the event logs. Actually, the system never even reports app hangs. Sometimes, it similar to what I've seen on Windows 7 systems where the screen goes milky and asks if I want to trouble shoot, that's only when get impatient and click happy. The really odd thing, is that it will NOT do this for a few minutes at a time, and then starts up again. Like I will click on the start menu and browse for the Admin Tools, the start menu will hang at some point and I'll have to wait about a minute, then it's OK. The next time I do this, a few seconds later, it's fine. Every click seems to hang the first time around, then be ok the second time if I do the exact same thing. If anyone has any suggestions, please PLEASE let me know! thanks =)

  Read the article

• Unable to understand why Alfresco doesn't start on Tomcat

  - by Infernalsirius

  I have a problem that I've been inspecting for a while now, googling and everything but could not begin to understand. I'm really not used to java, even less tomcat. So there it is. First, the setup. Centos 5.3 on a virtualized server. Bitnami Native Alfresco stack (tomcat5.5, mysql5, java, javajdk, JDBC) Content of catalina.log. Since it's the shortest and where I found my first clue to what is going wrong: SEVERE: Error listenerStart Aug 27, 2009 5:32:58 PM org.apache.coyote.http11.Http11BaseProtocol init INFO: Initializing Coyote HTTP/1.1 on http-8080 Aug 27, 2009 5:32:58 PM org.apache.catalina.startup.Catalina load INFO: Initialization processed in 229 ms Aug 27, 2009 5:32:58 PM org.apache.catalina.core.StandardService start INFO: Starting service Catalina Aug 27, 2009 5:32:58 PM org.apache.catalina.core.StandardEngine start INFO: Starting Servlet Engine: Apache Tomcat/5.5.25 Aug 27, 2009 5:32:58 PM org.apache.catalina.core.StandardHost start INFO: XML validation disabled Aug 27, 2009 5:34:47 PM org.apache.catalina.core.StandardContext start SEVERE: Error listenerStart Aug 27, 2009 5:34:47 PM org.apache.catalina.core.StandardContext start SEVERE: Context [/alfresco] startup failed due to previous errors Aug 27, 2009 5:34:48 PM org.apache.coyote.http11.Http11BaseProtocol start INFO: Starting Coyote HTTP/1.1 on http-8080 Aug 27, 2009 5:34:48 PM org.apache.jk.common.ChannelSocket init INFO: JK: ajp13 listening on /0.0.0.0:8009 Aug 27, 2009 5:34:48 PM org.apache.jk.server.JkMain start INFO: Jk running ID=0 time=0/11 config=null Aug 27, 2009 5:34:48 PM org.apache.catalina.storeconfig.StoreLoader load INFO: Find registry server-registry.xml at classpath resource Aug 27, 2009 5:34:48 PM org.apache.catalina.startup.Catalina start INFO: Server startup in 110327 ms Aug 27, 2009 5:38:27 PM org.apache.coyote.http11.Http11BaseProtocol pause INFO: Pausing Coyote HTTP/1.1 on http-8080 Aug 27, 2009 5:38:28 PM org.apache.catalina.core.StandardService stop INFO: Stopping service Catalina Aug 27, 2009 5:38:29 PM org.apache.coyote.http11.Http11BaseProtocol destroy INFO: Stopping Coyote HTTP/1.1 on http-8080 There's the content of catalina.out, it seems to be a stack trace or application trace of the error, is that right? Catalina.out gist on github There is a 404 error telling me this: The requested resource (/alfresco/) is not available. This is it. I think.

  Read the article

• Can't login to phpMyAdmin on a WAMP server running Windows 2008

  - by Richard West

  I am setting up a new server. I have installed Apache 2.2.17, PHP 5.3.3, MySQL 5.1.53 and phpMyAdmin 3.3.8 running on a Windows 2008 (32 bit) OS. I have configured Apache and PHP so they appear to be working fine. I have created the standard test php page with the following code and everything appears to be working fine. <?php //index.php phpinfo(); ?> I also see the mySQL and mySQLi section in the above webpage, so it appears that that I have the proper extensions loaded for mySQL access. The problem that I am having centeres around myPHPAdmin. I have this installed and I can access to the login screen at http://localhost/pma I login using "root" and the password I have setup for root. After a delay of 30 seconds or so the web page goes to a blank screen, and the url is now http://localhost/pma/index.php?token= No error is ever displayed - however nothing usable is either. I have confirmed that mySQL is running by going to the command line and logging into mySQL from there. I have double checked my configuration but I am not having any luck getting this to work. I have also disabled the Windows firewall, but that did not change anything. I installed mySQL using the standard port 3306. Any advice would be greatly appreciated.

  Read the article

< Previous Page | 592 593 594 595 596 597 598 599 600 601 602 603  | Next Page >