Search Results

Search found 33223 results on 1329 pages for 'database firewall'.

Page 599/1329 | < Previous Page | 595 596 597 598 599 600 601 602 603 604 605 606  | Next Page >

  • Wrong source IP when accessing internet directly from TMG server

    - by jarod1701
    Hi everyone, after implementing a ForeFront TMG server I'm facing only one problem: After I added a second IP to the external adapter I had to manually set "NAT Address Selection" inside the network rule "Internet Access" to the first IP since all others would get blocked by the CISCO firewall. This configuration works as long as traffic comes from the internal network (e.g. browser on clients). Traffic from the TMG directed to the internet always carries the second IP as it's source address and gets blocked. All our other TMGs/ISAs are running fine and I never came across this problem- Does anybody have a clue, coz I don't?! Kevin

    Read the article

  • Recommended RAM and disc space for Oracle 11g on Windows

    - by Álvaro G. Vicario
    I need to provide the recommended amount of RAM and disc space (divided in two partitions) so the customer can create an appropriate virtual machine to run Oracle. All I could find in the documentation was a brief listing with minimum RAM and typical/advanced install types. The virtual machine will run latest Oracle Standard Edition One (11g release 2 so far) under Windows Server 2008 x64 and will host a reasonably low traffic web application. How much RAM and disc must I ask for in order to be safe? (Feel free to ask for further details if I've omitted something relevant.) Update: Rough estimations: Database size: 10 MB after installation Growth rate: +3MB per day on average Size of database 'active' data: (not sure of what this means, there's not actual archive so I guess all data is current) Amount of data written per second in peak hours: a few KB Number of client sessions: 3 or 4 at most Frequency and response size of most heavy requests: some reports make heavy table JOINS that need up to 20 seconds to complete but they won't return more than a few thousand rows with plain text. The app also handles BLOBs (typical size from 50KB to 200KB)

    Read the article

  • ORA-1034 Oracle Not Found

    - by Venkata
    I have recently installed oracle 11g on Windows 7 Home Premium Operating System. I logged in as administrator into windows. I am trying to create a database using DBCA wizard. I started the wizard as administrator. Everything goes fine until last step. However when creating the database the creation fails with ORA-01034 Oracle Not Available error. All my oracle services looks up and running. I consulted the documentation and forums. I have got no clue why I am running into the error.

    Read the article

  • Do I really need Microsoft Updates?

    - by Tony Wong
    When I install a fresh copy of XP home (bought it from the store.. not a copy) my pc rocks like lightening speed. But when I start installing all the updates, patches & less .NET 4.0 client (As the .NET 4.0 Client seems to bring machine to slow crawl). The pc starts to slow down.. like there is more resources to watch or something in the background is happening. So could I not get away with a awesome virus protector & awesome firewall set-up and avoid all the patches? The machine I have is a quad 4, 4gb ram and 2.3 GHZ process. Tons of room and the machine can run several apps at one time.. but when the updates happen.. its s-l-o-w!

    Read the article

  • Port Forwarding: Why do my local sites on 80 work but not those on 8080?

    - by Chadworthington
    I setup my router to forward port 80 to the PC hosting my web site. As a result, I am able to access this url (Don't bother clicking on it, it's just an example): http://my.url.com/ When i click on this link, it works: http://localhost:8080/tfs/web/ I also forward port 8080 to the same web server box But when I try to access this url I get the eror "Page Cannot be displayed:" http://my.url.com:8080/tfs/web/ I fwded port 8080 the same way I fwded port 80. I also turned off Windows Firewall, in case it was blocking port 8080. Any theories why port 80 works but 8080 does not?

    Read the article

  • How do I securely execute commands as root via a web control panel?

    - by Chris J
    I would like to build a very simple PHP based web based control panel to add and remove users to/from and add and remove sections to/from nginx config files on my linode vps (Ubuntu 8.04 LTS). What is the most secure way of executing commands as root based on input from a web based control panel? I am loathe to run PHP as root (even if behind an IP tables firewall) for the obvious reasons. Suggestions welcome. It must be possible as several commercial (and bloated, for my needs) control panels offer similar functionality. Thanks

    Read the article

  • Configure Iptables to allow a PHP-app accessing a port-nr

    - by Camran
    I have a php-application which connects to another app called Solr (database search engine). I can via this php app add/remove documents (records) from the Solr index. However, the Solr security is low, and anybody with the right port nr can access Solr and remove documents (records). I wonder, is it possible to ONLY allow my own php-app to have access to Solr somehow? Prefferably via Iptables. I am thinking I can only allow my own servers IP to that port, and it would solve my problem, because PHP is a server-side code. But I am not sure. About the Php-app: The website is a classifieds website, and when users wants to add or remove classifieds, they do so through a php app, which is this one. The app has a function which connects to solr and updates the database (index). I appreciate detailed answers... Thanks

    Read the article

  • How to build a small network/server at home, basics

    - by Moe
    I'm one class away from my BA IT, I took several classes in general IT. Out of all the books I found just two to be really beneficial. I'm trying to get the hands on experience so my question is.... I want to build a small network in my home, wireless and also wired; printer, laptop, desktop, server (I have 4 1TB external drives of movies/music I want to be available to all computers) Where would I start from building a server with my hard drives, good modem, router, switch port, firewall internet speed/connection etc. This is my first project I want to try.

    Read the article

  • System Center Configuration Manager 2007 - Debugging Client Installs

    - by Dayton Brown
    Hi All: Having an issue installing the CCMsetup client on desktops. The CCMSetup makes it to the PC, files are there, it gets added to the services for automatic start, it starts, but quits almost instantly. Logs on the desktop show a entry like this. <![LOG[Failed to successfully complete HTTP request. (StatusCode at WinHttpQueryHeaders: 404)]LOG]!><time="14:28:51.183+240" date="06-11-2009" component="ccmsetup" context="" type="3" thread="2388" file="ccmsetup.cpp:5808"> What am I missing? EDIT: Firewall is off on both client and server.

    Read the article

  • SQL 2000 and group names

    - by Nasa
    I have a SQL 2000 server which has databases, under user section of the database object, I have some NT 4.0 groups. These groups were migrated over to Active Directory some time ago using ADMT with SID history. The original source domain groups have since been deleted. The access shown is olddomain\groupname. I don't know why, if they were ntfs permissions they would update automatically to target\groupname. The users in the AD domain still have access to the database as they are a member of the migrated group (Target\groupname). I was wondering 1) Why does the old group (source\groupname) show up as it doesn't exist anymore. But access is still granted to the target group? 2) Is there any easy way to update the group name from source\groupname to target\groupname? Thanks for any help.

    Read the article

  • Windows 8 with LiveID login authenticates as Guest to remote SQl Server

    - by Tim Long
    I have a network where several users are using Office Accounting 2009 in multi-user client/server mode. OA is built on SQL Server. One PC acts as the 'server' and has the SQl Server instance, the others have only the application installed and no SQL instance, all of the apps connect remotely to the SQL instance on the 'server'. I'm using the term 'server' loosely here, it is just a normal workstation that happens to be designated as the server and runs the SQL instance. There is no NT domain, all user accounts are local accounts. The way that OA works in multi-user mode is that each user is required to have a local account with the same username and password on both the client and 'server' PCs. This has been working well, no along comes Windows 8. I use my 'Microsoft Account' aka LiveID to log into Windows 8. Office Accounting runs fine and attempts to connect to the database, but fails, 'you do not have permission to perform this operation'. In the SQL logs, I get this error: 2012-10-28 17:54:01.32 Logon Error: 18456, Severity: 14, State: 11. 2012-10-28 17:54:01.32 Logon Login failed for user 'SERVER\Guest'. Reason: Token-based server access validation failed with an infrastructure SERVER is the hostname of the server. So it seems to be authenticating as 'Guest'?? To verify this, I enabled the Guest account on the 'server' PC and then added Guest as an allowed user within Office Accounting (this simply creates the user in SQL and gives it an appropriate database role). Sure enough, My Windows 8 PC was then able to connect to the database when using Office Accounting. Clearly, having users authenticate as 'Guest' stinks from a security and auditing standpoint. So what I need are some ideas for how to work around this. I've tried switching the Windows 8 PC to a 'local account' and that works too, but requires giving up significant functionality on the Windows 8 PC. What I really need is a way to force the Windows 8 PC to use a specific set of credentials when connecting to the remote SQL instance. Office Accounting takes the logged in username, which is my LiveID and doesn't correspond to any Windows user name. Anyone solved this issue?

    Read the article

  • How can I fix my Virtual PC 2007 network configuration

    - by DanJ
    Hi, I have installed Windows Virtual PC 2007 on my Windows 2003 R2 Server. I have installed a virtual Windows XP. I have configured the virtual PC to use Shared Networking (NAT) I have disabled the firewall on the virtual windows XP The problem: I am unable to PING from Windows 2003 (the host) to the Windows XP (virtual) I do have normal traffic from the virtual to the internet Could this problem be related to routing? How I can I fix this network configuration to allow for the following traffic: 1. From Virtual to Internet 2. From Host to Virtual 3. If possible, from Internet to Virtual on pre-defined ports (port forwarding?) Thanks

    Read the article

  • Network vulnerability and port scanning services

    - by DigitalRoss
    I'm setting up a periodic port scan and vulnerability scan for a medium-sized network implementing a customer-facing web application. The hosts run CentOS 5.4. I've used tools like Nmap and OpenVAS, but our firewall rules have special cases for connections originating from our own facilities and servers, so really the scan should be done from the outside. Rather than set up a VPS or EC2 server and configuring it with various tools, it seems like this could just be contracted out to a port and vulnerability scanning service. If they do it professionally they may be more up to date than something I set up and let run for a year... Any recommendations or experience doing this?

    Read the article

  • FTP error 424 failed to establish connection

    - by cKK
    Getting "ftp error 425 failed to establish connection" when trying to connect to ftp server. Tried 2 ftp clients on 3 machines on same network and none work. However FTP works from home / mobile broadband. No ip blocks on ftp sever. Other ftp servers(differrent ip/hosts) work okay. firewall setup correct, no ports blocked. Is it possible to use a proxy for ftp a i think it's something with the ISP but taking too long to fix?

    Read the article

  • Getting 0x80070043 error when accessing Samba share from Windows 7

    - by FelixM
    I created a Samba share on my new Ubuntu 10.04 machine. When I try to access it from a Windows 7 client, I get network error 0x80070043 (The network path not found). However, I get this error when I click on the share in the Windows Explorer, so it seems that Windows does find the path. I already enabled NTLMv1, disabled 128bit security and made sure that NetBIOS is running. I briefly disabled the Windows firewall, it didn't make a difference. What could be the problem?

    Read the article

  • What is blocking incoming packets to port 67?

    - by Peter Robertson
    I have a DSP connected to a Windows 7 laptop by Ethernet. The laptop has all firewalls disabled (I've even tried stopping the Windows firewall service and DHCP). The DSP is sending well-formed BOOTP broadcast packets every 3 seconds to port 67. Wireshark running on the laptop sees these BOOTP packets coming in. I have a program running on the laptop with a socket successfully bound to port 67. I can see this using CurrPorts.exe. Nothing else is shown as accessing port 67. The program never sees any packets coming in. If I run a program in the DSP that sends ordinary UDP packets to port 67, Wireshark sees them coming in and reports that they are corrupt BOOTP packets, but now, my program gets them. Any idea what's going on here?

    Read the article

  • datacenter network change control best practices

    - by jpolache
    I have been tasked with compiling a list of possible network equipment changes at a data center. The task includes tagging which changes need change control and which don't. Does anyone know of a "best practices" list that I can start from? The methods for doing change control at this data center are well established. The list would be of specific configuration items that should or should not be included in the change control process, of example; static route entries switch port assignments firewall rule additions/changes etc.

    Read the article

  • Can I set up a 2nd home wireless router, with router2 connecting to the internet through a desktop which is wirelessly connected to router1?

    - by gil b.
    Hi, I apologize for the crudeness of my MSPaint drawing, but please view my diagram of what I'd like to accomplish: Proposed home network architecture Currently, all devices are connected to 1 wireless router. I would like to make my own subnet, with a box in-between my subnet and the shared wireless router, so that I can learn about IDS, traffic analysis, etc. I was also given a cisco PIX firewall to play around with, and it'd be an added bonus if I could incorporate that into my network. The reason for this proposed architecture is so that I can monitor all MY traffic, without seeing anything going on with my roommates' traffic. my MAIN Question is, is it possible to have my desktop connect to the wireless router with internet via wireless card AND share that connection via the ethernet card, hooked to wireless router 2? cable modem - wireless router - desktop pc connected wirelessly - wireless router 2 getting internet from wired connection to desktop pc - laptops connected wirelessly The PIX can be left out for now, but I'm wondering if it could eventually be incorporated? THANKS!

    Read the article

  • switch's mgmt-ip is not remotely reachable.

    - by RainDoctor
    Switch model: Netgear FSM7352PS mgmt-ip: 192.168.1.100/24 Vlan id: 1 (default) There are couple of hosts in this Vlan: 192.168.1.2 (esxi console), for instance. 192.168.1.1 is the firewall/router interface. I can ping 192.168.1.1 and 192.168.1.2 from other vlans, say, 172.31.0.0/24 I can ssh to 192.168.1.2 from 172.31.0.0/24 I can't ping 192.168.1.100 from 172.31.0.0/24 However, I can ping 192.168.1.100 from 192.168.1.2 or from my laptop connected to that vlan (192.168.1.11). I can connect to the web GUI from my laptop when I am in that Vlan. Can anyone shed some light on why I am not able to connect from other vlans?

    Read the article

  • Tomcat - virtualhosting - name / ip / port - based

    - by lisak
    Hey, what are the usage scenarios for these kinds of virtual hosting ? Name Based - typical tomcat virtual hosting, one HOME instance with many contexts, each as an individual host IP based / port based - multiple instances of tomcat ( how is it with performance and memory consuption?) running on IP aliases (virtual IPs) for one network adapter, usually behind http apache server that can run name based virtual hostings. Otherwise I can't figure out how would I forward requests in iptables/firewall based on IP address, which is just one. How is IP based virtual hosting done as to Tomcat and multiple instances ? I'd like to hear some usage scenarios from your experience. How are you running your applications. Cause there are applications having it's own modified classloader and they are developed in a way to run alone withing a tomcat instance. Then there are trivial applications which can run within one instance without problems. Many thanks

    Read the article

  • Ubuntu and mysql server. Something isnt allowing me to connect

    - by acidzombie24
    I have a question about mysql settings http://serverfault.com/questions/94054/remote-connections-and-mysql-on-ubuntu/94088#94088 now i want to figure out why i cannot connect. I made sure bind-address was commented out. I can ping the server within the VM but i cannot ping it from within the VM using mysqladmin --protocol=tcp --host=self_ip ping. I also followed along and check if my ports were open and they look like they are. I setup samba on that VM and can access that with no problem as well. It looks like ubuntu does not have a firewall either (i figured this out before) so i am stumped why the server isnt allowing my connection. Apparently the config file works on another person side http://www.pastie.org/742545 I am using Ubuntu 6.06 LTS just because of 'support' reasons. So hopefully this will be 'easy'?

    Read the article

  • FTP error 425 failed to establish connection

    - by cKK
    Getting "ftp error 425 failed to establish connection" when trying to connect to ftp server. Tried 2 ftp clients on 3 machines on same network and none work. However FTP works from home / mobile broadband. No ip blocks on ftp sever. Other ftp servers(differrent ip/hosts) work okay. firewall setup correct, no ports blocked. Is it possible to use a proxy for ftp a i think it's something with the ISP but taking too long to fix?

    Read the article

  • Cannot Enter Credentials Over UAC Prompts During Remote Assistance

    - by user100731
    We are using sonicwall firewall device through out our network and we use the sonicwall virtual assistance tool for remote desktop assistance. Since our systems are not in workgroup and are on domain we face problem when the UAC prompts appear. As a work around we edited the UAC policies, such as switching to secure desktop-disable, Allowing UI Acess applications to prompt for elevation without using secure desktop-Enable etc. The ultimate result was we are able to see the UAC prompt on the remote user system but not able to interact with it like we are not able to enter credentials to it even I can see the password being entered if it is done by the local user. However, we cannot interact with UAC prompt window remotely. Is there any solution for this?

    Read the article

  • Rolling Back Microsoft CRM during testing

    - by npeterson
    Process related question: Currently we have a multi-tenant installation of MS CRM 4.0 on three servers, Dev, Test, and Live. We are actively working on customizing one of the tenants, but the others are static. During user testing, we often find it necessary to 'start fresh' in one of the tenants. Is it better to try and delete out the changes from the tenant (created accounts, leads, etc), or just revert the database to a backup from before the testing started? Is there compelling reasons why bulk delete is not advisable for MSCRM or that reverting the database frequently could cause issue?

    Read the article

< Previous Page | 595 596 597 598 599 600 601 602 603 604 605 606  | Next Page >