Search Results

Search found 26256 results on 1051 pages for 'information science'.

Page 599/1051 | < Previous Page | 595 596 597 598 599 600 601 602 603 604 605 606  | Next Page >

• Calculating IOPS for a single HDD - what am I doing wrong?

  - by red888

  So I know there is no standardized way of calculating IOPS for a HDD, but from everything I have read it appears one of the most accurate formulas is the following: IOP/ms = + {rotational latency} + ({block size} / {data transfer rate}) Which is IOs per millisecond or what the book I've been reading calls "Disk Service Time". Also rotational latency is calculated as half of one rotation in milliseconds. This was taken from the EMC book "Information Storage and Management" -arguably a pretty reliable source right\wrong? Putting this formula into practice consider this Seagate data sheet. I am going to calculate IOPS for the ST3000DM001 model for a block size of 4kb: Seek Average (Write) = 9.5 -I'll measuring IOPS for writes Spindle speed = 7200rpm Average Data Rate = 156MB/s So my variables are: Seek Time = 9.5ms Rotational latency = (.5 / (7200rpm / 60)) = 0.004s = 4ms Data Rate = 156MB/s = (0.156MB/ms / 0.004MB) = 39 9.5ms + 4ms + 39 = IO/ms 52.5 1 / (52.5 * 0.001) = 19 IOPS 19 IOPS for this drive clearly is not right so what am I doing wrong?

  Read the article

• Where is debian storing its network settings?

  - by user13743

  I have a debian machine that is supposed to have a static ip, but insists on getting its address from the DHCP server. Here's this settings file: $> cat /etc/network/interfaces # This file describes the network interfaces available on your system # and how to activate them. For more information, see interfaces(5). # The loopback network interface auto lo iface lo inet loopback # The primary network interface allow-hotplug eth0 iface eth0 inet static address 192.168.1.99 gateway 192.168.1.1 netmask 255.255.255.0 network 192.168.1.0 broadcast 192.168.1.255 Yet $> sudo /etc/init.d/networking restart Reconfiguring network interfaces...done. $> sudo ifconfig eth0 Link encap:Ethernet HWaddr 00:e0:03:09:05:2e inet addr:192.168.1.205 Bcast:255.255.255.255 Mask:255.255.255.0 ... Where is it being told to use dhcp?

  Read the article

• What are the requirements to test a website using jquery.get() ? [migrated]

  - by Frankie

  I am working on a simple website. It has to search quite a few text files in different sub-folders. The rest of the page uses jquery, so I would like to use it for this also. The function I am looking at is .get() for downloading the files. So my main question is, can I test this on my local computer (Ubuntu Linux) or do I have to have it uploaded to a server? Also, if there's a better way to go about this, that would be nice to know. However, I'm more worried about getting it working. Thanks, Frankie PS: Heres the JS/jQuery code for downloading the files to an array. g_lists = new Array(); $(":checkbox").each(function(i){ if ($(this).attr("name") != "0") { var path = "../" + $(this).attr("name") + ".txt"; $("#bot").append("<br />" + path); // debug $.get(path, function(data){ g_lists[i] = data; $("#bot").html(data); }); } else { g_lists[i] = ""; } }); Edit: Just a note about the path variable. I think it's correct, but I'm not 100% sure. I'm new to web development. Here's some examples it produces and the directory tree of the site. Maybe it will help, can't hurt. . +-- include ¦   +-- jquery.js ¦   +-- load.js +-- index.xhtml +-- style.css +-- txt    +-- Scripting_Tools    +-- Editors.txt    +-- Other.txt Examples of path: ../txt/Scripting_Tools/Editors.txt ../txt/Scripting_Tools/Other.txt Well I'm a new user, so I can't "answer" my own question, so I'll just post it here: After asking for help on a IRC chat channel specific to jQuery, I was told I could use this on a local host. To do this I installed Apache web server, and copied my site into it's directory. More information on setting it up can be found here: http://www.howtoforge.com/ubuntu_debian_lamp_server Then to run the site I navigated my browser to "localhost" and everything works.

  Read the article

• Windows Phone 7 event

  - by Dennis Vroegop

  This might not be of interest to anyone living outside of the Netherlands, but I still wanted to share this. On march 10th the dutch .net usergroup dotNed (of which I am chairman) organizes a LAN party together with the company Sevensteps. Sevensteps is a big player in the Surface area: they are one of the few companies whose applications are part of the standard tools you get when you buy a Surface unit. They were also present at the CES in Las Vegas earlier this year to introduce the SUR40, as mentioned in my previous post. But they do not only develop software for the Surface, they also do a lot of interesting things on other platforms. One of these is Windows Phone 7, or WP7 in short. Sevensteps and dotNed have joined forces to organize a free full day event where we will develop a WP7 application. The people attending will be developers (experienced and not so experienced on WP7), designers and all other sorts of people you’d expect in a project team. The day will start around 9.00 am and will end when the app is finished. We will form teams of both experienced and not experienced developers so that we can learn from each other. Each team will have their own task to perform, and in the end all parts will be assembled to form a killer WP7 app. As with everything that dotNed does this event is free for everyone. Microsoft will pay for dinner, Sevensteps will provide the room, lunch and ideas (and their expertise of course) and the rest is up to us! So if you are in The Netherlands that date, and you feel like hanging out with other WP7 or wannabe WP7 developers, join us! For more information (in Dutch) see http://www.dotned.nl Tags van Technorati: wp7,dotned

  Read the article

• All files on automounted NTFS partition are marked as executable

  - by MHC

  I have set up an NTFS partition to automount via fstab: # /etc/fstab: static file system information. # # Use 'blkid' to print the universally unique identifier for a # device; this may be used with UUID= as a more robust way to name devices # that works even if disks are added and removed. See fstab(5). # # <file system> <mount point> <type> <options> <dump> <pass> proc /proc proc nodev,noexec,nosuid 0 0 # / was on /dev/sda7 during installation UUID=e63fa8a2-432f-4749-b9db-dab328807d04 / ext4 errors=remount-ro 0 1 # /boot was on /dev/sda4 during installation UUID=e9ad1bb4-7c1f-4ea9-a6a5-799dfad71c0a /boot ext4 defaults 0 2 # /home was on /dev/sda8 during installation UUID=eda8c755-5448-4de8-b58c-9cb75823c22d /home ext4 defaults 0 2 # swap was on /dev/sda9 during installation UUID=804ff3a7-e5dd-406a-b63c-e8f3c635fbc5 none swap sw 0 0 #Windows-Partition UUID=368CEBC57807FDCD /media/Share ntfs defaults,uid=1000,gid=1000,noexec 0 0 As you can see I have added the noexec bit to the configuration. Why? Because any file I create on or move to the partition is automatically marked as executable. The problem is that there is no way of changing that through nautilus. I cannot uncheck the "Allow executing file as program" option. The noexec option doesn't help, unfortunately. It only prevents nautilus from displaying the "run" or "read" dialog but doesn't change the executable flag. Is there any way I can fix this?

  Read the article

• Why is Thunar not creating and showing thumbnails of images?

  - by darenw

  Thunar is my main file manager. Normally it automatically creates thumbnail images of all images in the directory being viewed. After experimenting with other Linux distros then installing Arch Linux once and for all, Thunar is not showing thumbs. Image files all get the same generic image icon. Googling turned up some information: Something called gvfs needs to be installed. I have it. Still no go. (Apparently this isn't actually needed anyway.) Someone had this problem and fixed it by running some mime-related command (I didn't save any notes) I did this same command but no go. Checking the obvious: in Thunar's Edit/Preferences, yes, the [x] Show thumbnails is turned on. When I view one image in GIMP or EOG, the generic icon in Thunar is replaced by a thumbnail. But only for that one file I opened.

  Read the article

• SOA, Could & Service Technology Symposium VIP pass 50% discount

  - by JuergenKress

  A series of podcasts, brought to you by Arcitura Education, SOASchool.com and CloudSchool.com in co-operation with the International Service Technology Symposium Conference Series, and the Prentice Hall Service Technology Series from Thomas Erl. As Part II of this Special Podcast Series, individuals will be able to tune into six distinct audio podcasts with expert speakers for the upcoming 5th International SOA, Cloud + Service Technology Symposium in London, UK on September 24-25, 2012. SOA, Cloud and Service Technology Symposium 2012 For Conference Details please visit the registration page Oracle promotion discount please enter during the registration the code DJMXZ370 Oracle Specialized SOA & BPM Partners at the conference: Oracle Specialized partners have proven their skills by certifications and customer references. To find a local Specialized partner please visit http://solutions.oracle.com SOA & BPM Partner Community For regular information on Oracle SOA Suite become a member in the SOA & BPM Partner Community for registration please visit  www.oracle.com/goto/emea/soa (OPN account required) If you need support with your account please contact the Oracle Partner Business Center. Blog Twitter LinkedIn Mix Forum Technorati Tags: SOA Cloud,SOA Governance,SOA Symposium,Thomas Erl,SOA Community,Oracle SOA,Oracle BPM,BPM,Community,OPN,Jürgen Kress

  Read the article

• Help desk software - specific feature needed

  - by LunchMoney

  I am having a hard time finding help desk software that allows for drop down hyperlink selection during ticket creation. The situation is that we do external support for client systems and connect via remotely anywhere or logmein. Right now we use a poorly modified php based system that has a customer drop down menu and then a site drop down list that is then parsed by a bit of java script which opens a url. What I am looking for is the ability to store customer site URL information in the database and during the creation of a ticket be able to select the customer name and then select the site there by placing the corresponding site URL in the ticket. The support tech will then be able to click on this link to access the customer's site. Has anyone used or seen help desk software with this feature?

  Read the article

• How do you determine the OWNER of an Oracle Database

  - by Kwang Mark Eleven

  When you install an Oracle database in a Unix server, the Unix user id you use for the installation becomes the OWNER of the database. What is the most reliable and general way of determining in a shell script which Unix user is the owner of an Oracle installation? I mean, can you perform a grep on a file created by the installation to find this information or shall I resort to use the ls command on a specific file on a specific directory. If the name of the file to be checked is also variable, I would need to have a way of determining the name and path to the file. Thanks in advance for your time

  Read the article

• How to organize a larger project with several sub-projects and their dependencies?

  - by RoToRa

  As a software developer until now, I've mostly worked on projects that were quite "monolithic" with hardly any dependencies on other projects, without building automation (no Make, Ant, Maven, etc.) and kept on a simple version control system (mostly Subversion) with just a few easily managed version branches. Now together with some friends I'm planning a project that is intended to run on multiple platforms (mostly mobile: Android, iOS, Kindle, Windows, etc.), thus written in several languages and on different development platforms. This will lead to many dependencies: All projects sharing the same resources (e.g. images) or projects dependent on each other (e.g. a core Java library project used by the Android and other Java based implementations). So what I need is some basic information on how to answer questions such as: How would the VCS be structured? Would a client-base or a decentralized VCS be better? How to decide building automation system(s) to use? Since this quite an open question I guess for now it would be great if you could point me to any books or web resources that you can recommend for this topic.

  Read the article

• Attributes of an Ethical Programmer?

  - by ahmed

  Software that we write has ramifications in the real world. If not, it wouldn't be very useful. Thus, it has the potential to sweep across the world faster than a deadly manmade virus or to affect society every bit as much as genetic manipulation. Maybe we can't see how right now, but in the future our code will have ever-greater potential for harm or good. Of course, there's the issue of hacking. That's clearly a crime. Or is it that clear? Isn't hacking acceptable for our government in the event of national security? What about for other governments? Cases of life-and-death emergency? Tracking down deadbeat parents? Screening the genetic profile of job candidates? Where is the line drawn? Who decides? Do programmers have responsibility for how their code is used? What if a programmer writes code to pry into confidential information or copy-protected material? Does he bear responsibility along with the person who used the program? What about a programmer who knowingly or unknowingly writes code to "fix the books?" Should he be liable?

  Read the article

• maintaining redirects in nginx from an external source

  - by Sascha

  I am in the situation to give our marketing department the opportunity to maintain their redirects by their own. Until now, they passed the information to the IT department and we maintained it for them in nginx.conf. Some of these guys are quite familiar with redirections in IIS or even in apache but it is no option to give them direct access to the nginx configuration. I see, that there is no nginx support for .htaccess files which I could give access to and I would also prefer not to grant write access to an conf-file that nginx includes. I expect, that our marketing will break our nginx setup within hours... Is there a secure possibility without giving them access our the heart of our load balancer?

  Read the article

• High level command line program for burning CDs and DVDs?

  - by stickmangumby

  I'm sick of screwing around trying to script a clean solution to burn multiple files and folders to CDs and DVDs with wodim, growisofs and genisoimage. I'm looking for a high level command line program that uses sensible defaults and takes arguments something like this: [program-name] [cd|dvd] /path/to/dir1/ /path/to/dir2/ /path/to/file ... It should then do all the low level copying and ISO generation transparently and just burn the damn disk! Does anyone have any suggestions? I've looked at several programs but it seems there are too many choices to trawl through and not enough information about them online. Thanks :)

  Read the article

• How can I use domain masking without having self referral in Google Analytics

  - by Cdore

  I have one old domain that points to a website's server's ip (let's call it www.oldsite.com). I have a new one, www.newsite.com, that is set up to be forwarded to a specific page on the website. Due to the way the host of newsite.com places the website in a frame, in Google Analystics, the newsite.com is listed as a source rather than the source they were at before hand, causing a self referral. A solution is to edit the code of the iframe as I looked up, but there's no way to really edit the host's masking source code of course. Another solution I did previously was have www.newsite.com point to the address that www.oldsite.come pointed to. It solved the analytics problems, but in exchange, the url masking no longer worked. In the address bar, it came up as www.oldsite.com. Is there a way to make me have url masking and be able to forward to agree with google analytics? The server of the website is hosted on a cloud server, if this is anymore information.

  Read the article

• CUDA & MSI GT60 with Optimus enabled GTX670M?

  - by user1076693

  I have a MSI GT60 Laptop with an Optimus enabled GTX 670M GPU, and I have been trying to get CUDA going in Ubuntu 12.04 environment. I realize that Optimus is not supported in Linux, but I have read the following post suggesting that CUDA works for hybrid GPUs. How can I get nVidia CUDA or OpenCL working on a laptop with nVidia discrete card/Intel Integrated Graphics? I installed the NVIDIA driver via sudo add-apt-repository ppa:ubuntu-x-swat/x-updates sudo apt-get update sudo apt-get install nvidia-current The resulting driver version is 302.17, and supposedly GTX 670M is supported since 295.59. I also downloaded CUDA 4.2 from the NVIDIA site, and compiled it against nvidia-current libraries. Unfortunately, when I run deviceQuery in the CUDA SDK, I get the following output cudaGetDeviceCount returned 38 -> no CUDA-capable device is detected Checking /proc/driver/nvidia/gpus/0/information gives the following Model: GeForce GTX 670M IRQ: 16 GPU UUID: GPU-????????-????-????-????-???????????? Video BIOS: ??.??.??.??.?? Bus Type: PCI-E DMA Size: 32 bits DMA Mask: 0xffffffffff Bus Location: 0000:01.00.0 Here is the output of "lspci | grep VGA" 00:02.0 VGA compatible controller: Intel Corporation Ivy Bridge Graphics Controller (rev 09) 01:00.0 VGA compatible controller: NVIDIA Corporation Device 1213 (rev ff) So... what am I doing wrong? Thanks!

  Read the article

• eclipse IDE won't start in ubuntu 10.04 64bit with sun-java

  - by aeischeid

  i get this error when I try to run from CLI ** (Eclipse:2318): CRITICAL **: menu_proxy_module_load: assertion `dbusproxy != NULL' failed # A fatal error has been detected by the Java Runtime Environment: # SIGSEGV (0xb) at pc=0x00007f34511a4e74, pid=2318, tid=139863603410704 # JRE version: 6.0_18-b18 Java VM: OpenJDK 64-Bit Server VM (14.0-b16 mixed mode linux-amd64 ) Derivative: IcedTea6 1.8 Distribution: Ubuntu lucid (development branch), package 6b18-1.8-0ubuntu1 Problematic frame: C [libglib-2.0.so.0+0x41e74] g_main_context_prepare+0x164 # An error report file with more information is saved as: /home/aaron/opt/eclipse/hs_err_pid2318.log # If you would like to submit a bug report, please include instructions how to reproduce the bug and visit: https://bugs.launchpad.net/ubuntu/+source/openjdk-6/ The crash happened outside the Java Virtual Machine in native code. See problematic frame for where to report the bug. # I have sun-java installed and set in my PATH: ~: echo $JAVA_HOME /usr/lib/jvm/java-6-sun/

  Read the article

• glibc not found when trying to install Absinthe?

  - by RafLance

  I am trying to install Absinthe 2.0.4 on Ubuntu 11.10 on a netbook. When I try to run the install file, this keeps on happening: rafael@RafLaptop:~/Desktop/absinthe-linux-2.0.4$ ./absinthe.x86 ./absinthe.x86: /lib/i386-linux-gnu/libc.so.6: version `GLIBC_2.15' not found (required by ./absinthe.x86) Do I need to upgrade GLIBC? If so, how do I do that? Since I'm on a netbook I can't use a LiveCD so I wanted to know if there was a way I could fix this issue without reinstalling my whole OS. Any explanations about what GLIBC is exactly would be great too since this is a learning experience for me. I know that GLIBC is a part of libc.so.6 and so I tried to run sudo apt-get install libc.so.6 but was told that it was up to date. But GLIBC isn't? I hope this articulates my problem well, if there are any pieces of missing info or questions to clarity my question, please let me know! ~-~ EDIT/UPDATE: So after some help on the AskUbuntu chat room from user izx, I have gathered the following information/understanding: -I need to run this program with Ubuntu 12.04 or recompile it from source -Upgrading libc on Oneiric to 2.15 while possible, is not an easy task and is not officially supported.

  Read the article

• SonicWall HA "gotchas"?

  - by Mark Henderson

  We're looking to move away from PFSense and CARP to a pair of SonicWall NSA 24001 configured in Active/Passive for High Availability. I've never dealt with SonicWall before, so is there anything I should know that their sales guy won't tell me? I'm aware that they had an issue with a lot of their devices shutting down connectivity because of a licensing fault, and they have an overtly complex management GUI (on the older devices at least), but are there any other big "gotchas" that I need to be aware of before committing a not insubstantial amount of money towards these devices? 1If you're outside the US, the SonicWall global sites suck balls. Use the US site for all your product research, and then use your local site when you're after local information.

  Read the article

• Sony Bravia KDL-32L5000 PC resolution slightly off

  - by user18818

  I have a PC running two Nvidia 8500 GTs in SLI mode and I am trying to use my TV in dual mode. When I switch the TV to PC the screen is nearly centered with a slight offset. All resolutions are effected from 800x600 all the way up to the TVs native 1360x768. I have tried with SLI on and off and have PhysX turned off as well as I thought that might have an effect. I am running Windows XP 64-bit SP2 DirectX ver 9.0c Nvidia driver version 181.22 Any other information please let me know. Thanks in advance.

  Read the article

• Removing (Presumably) Extraneous Network Adapters from Device Manager (eg WAN Miniport)

  - by Synetech inc.

  Can anyone shed some light on the default items in the Network Adapters branch of the Windows Device Manager? In addition to the network card, there are always a bunch of other things that I cannot find any useful information on such as RAS Asynch Adapter and all the WAN Miniports (IKEv2, IP(v6), L2TP, Network Monitor, PPPOE, PPTP, SSTP). I would like to trim it down and uninstall whatever possible but cannot find out exactly what these items are responsible for (and therefore whether or not they are needed on my system). Most of the pages found with Google are either people trying to fix an error with such an item or someone asking what it is and being given an unhelpful, pat response like “just leave them alone” or “they’re necessary”. I highly doubt that is the case and I’m certain that at least some items can be removed because even if they become necessary in the future they can be added again (for example installing Network Monitor or Protowall reinstalls the miniport drivers anyway).

  Read the article

• Simplest way to render image over top of another with another image used as mask in OpenGL?

  - by Adam Naylor

  The effect I'm looking for is to have a single large background image that is always visible (at full alpha) and then show a second image (what I call a light map or specular map) that is partially shown over the top based on a third image (which is effectively a mask). The effect is similar to this effect except instead of simply darkening or lightening the background image using the third image it needs to mask the second without effecting the first at all. The third image is the only one that moves therefore hard baking the third images alpha into the second image isn't an option. If my explanation isn't clear I'll provide visual examples when I have more time. I'd prefer not to go down a shader route as I haven't taught myself this area yet so unless I have too I'd rather try to achieve this with simple alpha blending. Happy to use a shader approach. Cheers. Additional These third images are obviously light sources being cast onto the first image showing the specular information from the second image to simulate the light 'shining' off the objects in the first image. The solution I implement will need to allow two light sources to potentially overlap so my current thoughts are that the alpha values of the two images will need to be combined (Added?) to produce a final image which masks the second image? Don't worry about things like coloured lights. For this technique the lights are all considered white.

  Read the article

• UDF filesystem -> Maximum number of files

  - by user978122

  I am considering partitioning a rather large hard drive with the UDF filesystem for an experiment, and would like to ask if anyone knows the maximum number of files, either by directory, or as a whole, that the UDF filesystem can handle? For some background, I looked at the JFS and XFS filesystems (NTFS has a limitation of the number of files per volume); however, since I run Windows, that's kind of out. UFD, on the other hand, does not appear to have these limitations, but then, I cannot really find any information on just how many files per volume the UDF file system supports.

  Read the article

• Hosting a web site at home: ISP Blocking port 80?

  - by tombull89

  Hello, I presume this is a better place to put this rather than server fault. I'm interested in setting up a small site to host at home as a "proof of concept" exercise, i.e. to prrove that I know how to do it. I've got a (virtual) server 2003 machine with a site on it, all configured with port forwarding through to 80 on my server. I have a Belkin F5D7634 which I have put my DYNDNS details in but when I try to go to my DYNDNS address it comes up with the page cannot be displayed. My ISP is Carphone Warehouse/AOL and I've been unable to find any information if they block port 80. If they do, can anybody reccomend a home provider that does not block port 80? Regards, Tom.

  Read the article

• Advice on software infrastructure for a FLOSS bounty site

  - by michaeljt

  I am planning to set up a simple web site where people can offer bounties for work on FLOSS projects. Unfortunately I have no experience at web development (I am a C/C++ developer), so I was hoping someone might be able to suggest out-of-the-box packages (preferably Debian ones) I could use to build the site from. My idea of how the site would work is to keep things as simple as possible. The person proposing a bounty would enter a description with relevant links (particularly to a bugtracker entry with the project the work is to be done on, where the real discussion and work would take place) and information and place an initial contribution. Other people would be able to add (donate, not pledge) contributions, but any discussion would take place on the project's bugtracker. I am also planning to run a mailing list rather than a forum (at least initially), so that is not a requirement. Paypal seems to me to be the handiest payment mechanism. So overall what I need is probably a simple interface with Paypal integration and a simple database backend. I hope this is the right place for my question, if not I would be grateful for pointers to somewhere better. And of course, this is purely about the technical side, though I am more than happy to discuss other aspects of the project elsewhere.

  Read the article

• LDoms with Solaris 11

  - by Orgad Kimchi

  Oracle VM Server for SPARC (LDoms) release 2.2 came out on May 24. You can get the software, see the release notes, reference manual, and admin guide here on the Oracle VM for SPARC page. Oracle VM Server for SPARC enables you to create multiple virtual systems on a single physical system.Each virtual system is called alogical domain and runs its own instance of Oracle Solaris 10 or Oracle Solaris 11. The version of the Oracle Solaris OS software that runs on a guest domain is independent of the Oracle Solaris OS version that runs on the primary domain. So, if you run the Oracle Solaris 10 OS in the primary domain, you can still run the Oracle Solaris 11 OS in a guest domain, and if you run the Oracle Solaris 11 OS in the primary domain, you can still run the Oracle Solaris 10 OS in a guest domain In addition to that starting with the Oracle VM Server for SPARC 2.2 release you can migrate guest domain even if source and target machines have different processor type. You can migrate guest domain from a system with UltraSPARC  T2+ or SPARC T3 CPU to a system with a SPARC T4 CPU.The guest domain on the source and target system must run Solaris 11 In order to enable cross CPU migration.In addition to that you need to change the cpu-arch property value on the source system. For more information about Oracle VM Server for SPARC (LDoms) with Solaris 11 and  Cross CPU Migration refer to the following white paper

  Read the article

< Previous Page | 595 596 597 598 599 600 601 602 603 604 605 606  | Next Page >