Search Results

Search found 48664 results on 1947 pages for 'internet access'.

Page 6/1947 | < Previous Page | 2 3 4 5 6 7 8 9 10 11 12 13  | Next Page >

  • How to share internet connection and making the client accessible over the lan

    - by Dario Silva Moran
    I've a Pc with Ubuntu 14.04 connected to a linkys router through wlan0, and I'd like to share internet connection to an AVR with ethernet port. This is pretty simple if only internet connection is required for the AVR: actually, creating an ethernet connection as "Shared with other computers" and setting up the AVR IP configuration to use DHCP works just fine, but that makes a private class A lan between those two; of course ip addresses are not in the range of the LAN the router is managing. So, I tried with static ip on both sides (Ubuntu eth0 and AVR ip). Tried many combinations, none of them work to provide Internet access to the AVR and at the same time make the AVR accessible over the network through his static ip address (say, 192.168.0.110). Any tips around to share??

    Read the article

  • Why won't my Internet stay connected?

    - by Aubrey
    I recently updated to Ubuntu 12.04, from Ubuntu 10.04, and my Internet, USB760 Novetel Verizon-Wireless Mobile Broadband, will connect after a minute of me starting the computer up. But after a while it will disconnect and the only way to reconnect it is to restart the computer. Even then, sometimes it won't work. I've also noticed that since I've upgraded the computer, the computer will randomly enter into Power Save mode, and then it will tell me to log back in. I've done nothing to provoke it, other than using the Internet. I was wondering, could the entering into Power Save mode and the Internet disconnecting be somehow connected? I've updated the computer every time it asks me to do so, but it doesn't seem to be helping. If Ubuntu 10.04 would still be supported by next year, I would downgrade. But I have no other choice than to stick with 12.04. Any help would be greatly appreciated! Thanks!

    Read the article

  • Slow internet browsing in Ubuntu

    - by Mark
    I have a dual boot set up with windows and ubuntu, when I'm using windows internet browsing is a lot faster than when I'm using ubuntu and I don't know why. It's like there's just a big latency rather than the maximum speed is lower, there's a big delay before anything happens when using Ubuntu, it happens with all websites all the time. I've never configured the internet connection because it just worked straight away. I have broadband connection through a router shared with some other computers, when we set up the router and internet connection everything was done with windows. Any ideas on what I could do to fix this? Thanks to anyone who replies.

    Read the article

  • Changed isp, Ubuntu 13.04 won't connect to the internet

    - by Lori
    I recently moved and changed internet service providers. my ubuntu 13.04 machine is unable to connect to the internet. I need help with the networking settings. The previous isp was Verizon dsl, current a cable company. Both connect via ethernet cable. The cable and router work on a windows machine, but not my ubuntu machine. The cable company doesn't support ubuntu or any linux operating systems. The computer seems to recognize the connection. When I unplug and plug in the cable I get a little window that says disconnected, connected. However, I can't connect to the internet in either Firefox or the Ubuntu software installer (tried this to see if it was a firefox issue, it wasn't). I tried shutting down and restarting, plugging and unplugging cables, etc.

    Read the article

  • sidebar covers footer in internet explorer 6 and 7

    - by Datis
    i have designed a template for wordpress, the problem is that when sidebar gets longer some of it will cover the footer in internet explorer 6 and 7, the website address is : http://blog.baabak.ir (its in persian), but if you look at it in internet explorer 6,7 you will see the sidebar logo will cover the footer, for example in this page : http://blog.baabak.ir/?page%5Fid=141 but the website is ok in other browsers, whats the problem ?

    Read the article

  • Internet Explorer Rage?

    - by DMin
    I know Internet Explorer is a huge irritating thing for a lot of us - especially IE6. What is the most interesting/extreme thing you've done/fantasized-doing as a result of outrage for (re-)coding for Internet Explorer?

    Read the article

  • Access - Force Form Refresh on New Record

    - by gamerzfuse
    Let me set the stage here a bit: I have an Access project with various buttons, triggers, macros, etc. I needed an Appointment Date field to only show when the button APPOINTMENT MADE is toggled ON. This works great. The problem arises when you submit a form with the APPOINTMENT MADE toggled. Once the record is inserted, the Access file clears all fields, but leaves the Appointment Date enabled, when it should be disabled by default. I have tried the Current, Load, Before Insert, After Insert and many other options on the FORM properties. Am I missing a simple way to force a refresh so the field goes back to it's default DISABLED? Thanks in advance!

    Read the article

  • Share wireless Internet connection between Ubuntu 10.04 to Windows Vista through ethernet

    - by Artyom2033
    I am connected to the internet using a wireless connection on my laptop running ubuntu 10.04 and I want to share it to a desktop running windows Vista trough a Ethernet cable. How do I do that? I've try the "GUI Method via Network Manager (Ubuntu 9.10 and up)" on this page : https://help.ubuntu.com/community/Internet/ConnectionSharing but how to I access to it from Windows Vista? I didn't even know if it is shared. Thanks for the help

    Read the article

  • FM Radio without Internet?

    - by WitchCraft
    Question: Is it possible to use FM radio WITHOUT internet connection or special devices ? On my Android phone, I can plug in the headphones, which are in turn used as antenna. Since Android is Linux and Ubuntu is also Linux, it should be possible to do this on a plain old Ubuntu notebook (13.04), too. Is it ? If yes, which application can I use for FM-Radio ? Note: I repeat: Live FM-Radio WITHOUT internet connection at the time of listening :)

    Read the article

  • OpenVpn is working but no internet connection

    - by user3636476
    I'm using an OpenVpn connection in Ubuntu, it's working well but when I'm using it, my internet connection is not working. I edited my connections in network manager, I've been to the VPN tab, and edited the VPN configuration. In the IPv4 Settings tab, I clicked in the bottom right button "Routes" and I ticked "Use this connection only for resources on its network". When I'm doing this the internet access is working but the vpn is not any help please?

    Read the article

  • Wireless internet is connected to an open network but has no internet

    - by Joshua Reeder
    I just installed Ubuntu on my laptop yesterday and it connected to the wireless fine. Then I took it to school, put it on their wired connection, downloaded some stuff, and now the wireless doesn't work. At first it would detect networks, but not connect. I restarted it and now it can connect, but it acts like it doesn't have internet in the browser. Wired connection still works fine on it. I know it isn't the network because my ipad is working on the wireless connection fine. I found another solution on here switching the security settings for the wireless, but this is the apartment's wireless so they have it open, and I won't be able to mess with it at all. Here is lspci output: 00:00.0 Host bridge: Intel Corporation Core Processor DMI (rev 11) 00:03.0 PCI bridge: Intel Corporation Core Processor PCI Express Root Port 1 (rev 11) 00:08.0 System peripheral: Intel Corporation Core Processor System Management Registers (rev 11) 00:08.1 System peripheral: Intel Corporation Core Processor Semaphore and Scratchpad Registers (rev 11) 00:08.2 System peripheral: Intel Corporation Core Processor System Control and Status Registers (rev 11) 00:08.3 System peripheral: Intel Corporation Core Processor Miscellaneous Registers (rev 11) 00:10.0 System peripheral: Intel Corporation Core Processor QPI Link (rev 11) 00:10.1 System peripheral: Intel Corporation Core Processor QPI Routing and Protocol Registers (rev 11) 00:16.0 Communication controller: Intel Corporation 5 Series/3400 Series Chipset HECI Controller (rev 06) 00:1a.0 USB controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 05) 00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio (rev 05) 00:1c.0 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 1 (rev 05) 00:1c.1 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 2 (rev 05) 00:1c.2 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 3 (rev 05) 00:1c.3 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 4 (rev 05) 00:1c.4 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 5 (rev 05) 00:1d.0 USB controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 05) 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev a5) 00:1f.0 ISA bridge: Intel Corporation Mobile 5 Series Chipset LPC Interface Controller (rev 05) 00:1f.2 SATA controller: Intel Corporation 5 Series/3400 Series Chipset 4 port SATA AHCI Controller (rev 05) 00:1f.3 SMBus: Intel Corporation 5 Series/3400 Series Chipset SMBus Controller (rev 05) 01:00.0 VGA compatible controller: NVIDIA Corporation GT218 [GeForce 310M] (rev a2) 01:00.1 Audio device: NVIDIA Corporation High Definition Audio Controller (rev a1) 02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller (rev 05) 07:00.0 Network controller: Realtek Semiconductor Co., Ltd. RTL8191SEvB Wireless LAN Controller (rev 10) 16:00.0 System peripheral: JMicron Technology Corp. SD/MMC Host Controller (rev 20) 16:00.2 SD Host controller: JMicron Technology Corp. Standard SD Host Controller (rev 20) 16:00.3 System peripheral: JMicron Technology Corp. MS Host Controller (rev 20) 16:00.4 System peripheral: JMicron Technology Corp. xD Host Controller (rev 20) ff:00.0 Host bridge: Intel Corporation Core Processor QuickPath Architecture Generic Non-Core Registers (rev 04) ff:00.1 Host bridge: Intel Corporation Core Processor QuickPath Architecture System Address Decoder (rev 04) ff:02.0 Host bridge: Intel Corporation Core Processor QPI Link 0 (rev 04) ff:02.1 Host bridge: Intel Corporation Core Processor QPI Physical 0 (rev 04) ff:03.0 Host bridge: Intel Corporation Core Processor Integrated Memory Controller (rev 04) ff:03.1 Host bridge: Intel Corporation Core Processor Integrated Memory Controller Target Address Decoder (rev 04) ff:03.4 Host bridge: Intel Corporation Core Processor Integrated Memory Controller Test Registers (rev 04) ff:04.0 Host bridge: Intel Corporation Core Processor Integrated Memory Controller Channel 0 Control Registers (rev 04) ff:04.1 Host bridge: Intel Corporation Core Processor Integrated Memory Controller Channel 0 Address Registers (rev 04) ff:04.2 Host bridge: Intel Corporation Core Processor Integrated Memory Controller Channel 0 Rank Registers (rev 04) ff:04.3 Host bridge: Intel Corporation Core Processor Integrated Memory Controller Channel 0 Thermal Control Registers (rev 04) ff:05.0 Host bridge: Intel Corporation Core Processor Integrated Memory Controller Channel 1 Control Registers (rev 04) ff:05.1 Host bridge: Intel Corporation Core Processor Integrated Memory Controller Channel 1 Address Registers (rev 04) ff:05.2 Host bridge: Intel Corporation Core Processor Integrated Memory Controller Channel 1 Rank Registers (rev 04) ff:05.3 Host bridge: Intel Corporation Core Processor Integrated Memory Controller Channel 1 Thermal Control Registers (rev 04) Update: I re-installed Ubuntu 12.04 (I assumed I messed something up while toying with it) but it did not solve the problem. Eventually, I got it to work with my school's wireless internet (the default network settings were wrong), but the internet still doesn't work on my apartment's wifi (it has no security on it).

    Read the article

  • How to connect to internet using huawei E303C datacard

    - by Rahul Choudhary
    It is very difficult to use ubuntu. After six hours of research on various websites and ubuntu blogs I was unable to connect to internet using my Huawei DataCard E303C. I wonder that if it takes so much long time to figure out how to connect to internet using a 3g datacard (Huawei E303C) to connect to internet, then how would I do my daily computing tasks using ubuntu. Is there anyone who can help me with that. My personal practical experiences says that using ubuntu instead of windows is not different but tough. Yes it is very tough to use ubuntu. Why it cannot be like we double click and software gets installed as it happens in windows and why we always have to use terminal to install everything. Why everything in ubuntu is very difficult and tough to accomplish. I am drifting away from ubuntu. Can any developer at ubuntu help keep my interest in ubuntu? Is there anyone who can lure me to use ubuntu again?

    Read the article

  • Hosting WCF over internet

    - by user1876804
    I am pretty new to exposing the WCF services hosted on IIS over internet. I will be deploying a WCF service over IIS(6 or 7) and would like to expose this service over the internet. This will be hosted in a corporate network having firewall, I want this service to be accessible over the internet(should be able to pass through the firewall) I did some research on this and some of the pointers I got: 1. I could use wsHTTPBinding or nettcpbinding (the client is intended to be .net client). Which of the bindings is preferable. 2. To overcome the corporate I came across DMZ server, what is the purpose of this and do I really need to use this). 3. I will be passing some files between the client and server, and the client needs to know the progress of the processing on server and the end result. I know this is a very broad question to ask, but could anyone give me pointers where I could start on this and what approach to take for this problem.

    Read the article

  • can connect to wifi router but not the internet 12.10

    - by harsh
    I believe i have tried every trick in the book ! I am able to access my router from my ubuntu desktop but not even a single site on the internet. i have installed the drivers for my pci wifi card following this procedure : http://steveswinsburg.wordpress.com/2011/03/12/how-to-install-a-d-link-dwa-525-wireless-network-card-in-ubuntu-10-04/ Earlier it didn't connect to the internet and kept prompting me for the password. after i installed the driver it got connected ! but now i cant access the internet and can only access my router. i deleted the resolv.conf file. I have also tried the "rkill" command and it shows it is unlocked. I have even tried pinging the ip's 8.8.8.8 & 8.8.4.4 and i get replies from both. I have also added them on my wifi configuration setup on ubuntu desktop. I am new to ubuntu but learning fast :-) These are the things i don't like about ubuntu, the simple tasks are difficult for a person coming from windows. I am using ubuntu 12.10. please reply at the earliest i would be very thankful.

    Read the article

  • Mouse doesn't work & internet connection not made in Ubuntu 12.04 LTS

    - by David Skare
    Yesterday, Nov 15, 2012, I booted into my Ubuntu 12.04 LTS system. It has resided on a Crucial 128 GB SSD with about 90% free space since early summer. I also have Windows 7 loaded on another Crucial 256 GB SSD. Ubuntu has set up a dual boot system for me even though each OS has its own SSD. I have been using this setup without problems since summer. Yesterday, when the boot process finished, my Microsoft Comfort Mouse 3000 did not work and there was a message that Ubuntu was not connected to the internet. So w/o the mouse I was forced to turn the machine off manually. About 4 days ago Ubuntu worked fine and booting into Win 7 also works fine. I have a backup machine with the same style mouse on it so I swapped the mouse onto this system. Same results. But both mice work when booting into Win 7. Today I removed both SSDs and installed my Ubuntu 12.04 HD which has not been used since I moved Ubuntu to the SSD from it. Same results. Between the last time I used Ubuntu 12.04 on the SSD and when I tried to use it again I made no changes to my machine, either hardware or software. My machines specs are: AMD FX-6100, MSI 990FXA-GD65 AM3+ format with latest BIOS (Ver 19.9), Corsair Vengeance 1866 MHz memory - 16 GB (4GB X 4 sticks), MSI N580GTX video card (nVidia 306.97 drivers), Sony Bravia 32" HD TV as a monitor, Pioneer BluRay DVD-RW, DSL connection to internet thru a router (10 mps), Crucial 128 GB SSD (90% free space), Microsoft Comfort Mouse 3000 I try to maintain current BIOS and drivers for all devices. I mostly use my Ubuntu system for programming in GCC and OpenCOBOL, surfing the internet and e-mailing. No games are installed. I'm stumped! If anyone has experienced this same problem I'd appreciate knowing how you solved it. TIA, Dave

    Read the article

  • Do you still support Internet Explorer 6?

    - by Marcos Buarque
    Hi, I hope this question isn't tagged as too generic. But this is an honest concern/curiosity I have. Are you people still supporting Internet Explorer 6? Web developers sometimes use the concept of softly degrading their projects in older browsers. When I say "older", I mean mainly Internet Explorer 6. When you softly degrade you still have to waste tons of time tryng to fit things in IE6. This is time consuming and the client usually won`t even mind asking or checking how things look in IE6. So what are you doing when your website is completely broken in IE6? Do you bother to completely fix it and eat up your time or do you simply ignore it (leave broken boxes, opaque PNG files etc.)?

    Read the article

  • Count Items in Access 2003

    - by Anna
    I have a table which contains a column with different items which i would like to count by there type. For example the table looks like the following: Id Type 1 Table 2 Table 3 TV 4 TV 5 Table 6 TV 7 TV The result should looks like: Type NumOfItems Table 3 TV 4 I use the following code which doesn't work for my Access 2003: SELECT Table1.Type, Count(Table1.Type) AS NumOfItems FROM Table1

    Read the article

  • Intermittent internet connectivity

    - by Rob Oplawar
    UPDATED: I recently built a new computer and set it up to dual-boot Windows 7 and Ubuntu 11.10. In Windows, using the same hardware, my LAN connectivity is solid. In Ubuntu, however, my network interface periodically dies and resets itself; I'll have a solid connection for 30 seconds, and then it will go out for 30 seconds. When I tail the log: tail -f /var/log/kern.log I see "eth0 link up" messages appear periodically, corresponding with the return of connectivity. I posted the original question months ago, and misinterpreted what was going on. With a working Internet connection in Windows, I ignored the problem for some months. See my answer below for the solution (drivers). ORIGINAL POST In Ubuntu, although I maintain a solid connection to my LAN (pinging the router IP address consistently returns a good result), my internet connectivity drops in and out. When I continuously ping 74.125.227.18 (a google.com server), I get responses for a while, then I start getting "Destination Host Unreachable" for a while, then I get responses again. This happens consistently, dropping the connection for about 30 seconds out of every minute or two. Whether I configure my network via the network manager or via /etc/network/interfaces seems to make no difference. I configure with the following settings: address 192.168.1.101 network 192.168.1.0 gateway 192.168.1.99 (my router's IP address) netmask 255.255.255.0 (confirmed as the right netmask for the router) broadcast 192.168.1.255 (also confirmed with the router). ifconfig confirms that these settings are working: eth0 Link encap:Ethernet HWaddr 50:e5:49:40:da:a6 inet addr:192.168.1.101 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::52e5:49ff:fe40:daa6/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:11557 errors:0 dropped:11557 overruns:0 frame:11557 TX packets:13117 errors:0 dropped:211 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:9551488 (9.5 MB) TX bytes:1930952 (1.9 MB) Interrupt:41 Base address:0xa000 I get the same issue when I use automatic DHCP address settings, although I did confirm that there is no other machine on the network with the static IP address I want to use. As I said, the connection to the local network stays solid - I never have any trouble pinging 192.168.1.* - it's internet addresses that I intermittently cannot reach. It's not a DNS issue because pinging known IP addresses directly shows the same behavior. Also, I don't think it's a hardware issue, as I never have any internet connectivity problems on the same machine in Windows. The network hardware is built into the motherboard: Gigabyte Z68XP-UD3P. I managed to bring the OS fully up to date, according to the update manager, but it didn't fix the issue, and with my limited understanding of network architecture I'm at my wit's end. The only clue I can see is that ifconfig is reporting a lot of dropped packets, but I'm not sure what to do about it. UPDATE: It seems my problem is a little more generic than I described; now when I try pinging my router and google simultaneously, they both go unreachable at the same time. Running ifdown eth0 and then ifup eth0 brings it back temporarily; if I just wait it comes back after a couple of minutes. I'll broaden my search through intermittent network connectivity problems.

    Read the article

  • Ubuntu Live USB: best practices for secure net traffic

    - by Och
    I want to to set up a live USB with Ubuntu, in the most secure way. So I want to have the persistent data on a second USB, something that its not that much problematic. How to configure a very safe Internet surfing (throughout a VPN?) Which are the best practices that could be implemented to have the Ubuntu live in a USB, the persistent data in other, and with the Internet access to a VPN (the Ubuntu privacy remix gives most of this, except the VPN config), Any ideas of how to combine the best of Ubuntu privacy remix, and Internet access to a VPN?

    Read the article

  • MS Access 2003 - Unbound Form uses INSERT statement to save to table; what about subforms?

    - by Justin
    So I have an unbound form that I use to save data to a table on button click. Is there a way I can have subforms for entry that will allow me to save data to the table within that same button click? Basically I want to add more entry options for the user, and while I know other ways to do it, I am particularly curious about doing it this way (if it can be done). So lets say the 'parent form' is frmMain. And there are two child forms "sub1" and "sub2". Just for example sake lets say on frmMain there are two text boxes: txtTitle & txtAuthor. sub1 and sub2 both have a text Box on them that represent something like prices. The idea is Title & author of a book, and then a price at each store (simplified). So I tried this (because I thought it was worth a shot): Dim db as DAO.database Dim sql as String sql = "INSERT INTO (Title, Author, PriceA, PriceB) VALUES (" if not isnull(me.txtTitle) then sql = sql & """" & me.txtTitle & """," Else sql = sql & " NULL," End If if not IsNull(me.txtAuthor) then sql = sql & " """ & me.txtAuthor & """," else sql = sql & " NULL," end if if not IsNull (forms!sub1.txtPrice) then sql = sql & " """ & forms!sub1.txtPrice & """," else sql = sql & " NULL," end if without finishing the code, i think you may see the GOTCHA i am headed for. I tried this and got an "Access cannot find the form "" ". I think I can pretty much see why on this approach too, because when I click the button that calls the new sub form into the parent form, the values that were just entered are not held/saved as sub1 closes and sub2 opens. I should mention that the idea above is not intended to be a one or the other approach, rather both sub forms used everytime. so this is an example. i want to use this method (if possible) to have about 7 different sub form choices in one form, and be able to save to a table via a SQL statement. I realize that there may be better ways, but I am just wondering if I can get there with this approach out of curiousity. Thanks as always!

    Read the article

  • MS Access 2003 - Option Group frame: can I add text boxes that are part of the frame instead of rad

    - by Justin
    Ok so this maybe a simple/silly question but I don't know so here goes: In access let's say I want to have a frame control, so I click the option group button and add it to the desgin surface. However, I am not wanting to use this as a option group with radio button selection, instead I would like to add text boxes instead the frame, so that when I reference the frame, it references every control instead of it, hence the text boxes, cbo boxes, etc.....just as it would if they were radio option selections. So can you do this? I want whatever controls I add inside the frame to be easily referenced (i.e. make all controls visible just by using frameExample.visible = true) so that I can build my own tab control groupings..... can this be done? Thanks! EDIT: What I am trying to accomplish is having a form that includes a collection of controls (input controls - cbo boxes, text boxes, etc), that serve as the Main record information. These are saved to a table via an INSERT statement on button_click because this form is unbound. Next I have 8 categories that are relative per each main record (and data that goes along with it). Each of these categories could have a sub form area and a button click that bring it's relative form into the sub form area. These sub forms would be unbound as well as I would just save data via SQL statement. So i know I could accomplish this by running the insert statement from the parent form, on the main collection control's data that would create the KeyID number, then run a SQL statement that would turn around and load that KeyID number right back onto the page in a hidden text box. Then when I click one of the sub forms and load its relative collection of controls, I could then save that data along with KeyID for each of these sub-forms/tables. SO...... I was wondering if instead you could define these controls as a collection so that you could hide and make visible all the ones you need on button clicks and avoid the need for additional forms (subs). I know that if a user enters data into a text box, and then somewhere along the way that box becomes hidden, the data still exists in it and still ends up in the SQL statement.... So I want all these controls to exist on the same form, but I thought what is I could encapsulate them into a frame like an option group, then I could call the frame and all the relative controls would be called up (made visible) as needed. Sorry for the long explanation but I thought it would help.

    Read the article

  • is it possible to access/write database ms access 2003 .mdb at the same time?

    - by tintincute
    hi i have a problem, i have a user who created a database using ms access 2003 the problem is, if he's opening the db and made some changes, the other user can open the db but they can't work on it. but if he's exited the program, then the user can make some changes. i would like to know if its possible; that they can work at the same time when they open the database? Thanks I attached a .jpg here to see the program: www.freeimagehosting.net/image.php?ed11af4cc5.jpg additional jpg: http://www.freeimagehosting.net/image.php?3c60d8e046.jpg additional question: I tried to do the "Splitting of Database" here and after I clicked on Split I got an error: "The database engine couldn't lock the table, because it is already in use by another person or process"... what does that mean? Did I lock the table? www.freeimagehosting.net/image.php?fc52cfc486.jpg

    Read the article

  • LiteSpeed enable Access-Control-Allow-Origin (no response header on CORS request)

    - by Joe Coder Guy
    Seriously, I can't find a single page discussing this for litespeed. Using this format in the htaccess "Header set Access-Control-Allow-Origin http://aSite.com" (and https) sends the setting in the http response header, but I still get the "XMLHttpRequest cannot load https://aSite.com/aFile.php. Origin aSite.com is not allowed by Access-Control-Allow-Origin" error when trying to access https from http origin. Also, I receive no response header for https, only that message shows up in Chrome. Is the server still blocking it even though I've sent the proper headers? I read elsewhere that it helps to add these terms Access-Control-Allow-Headers X-Requested-With Access-Control-Allow-Methods OPTIONS, GET, POST Access-Control-Allow-Headers Content-Type, Depth, User-Agent, X-File-Size, X-Requested-With, If-Modified-Since, X-File-Name, Cache-Control but I don't see these in my headers. Using these, my PHP files aren't even reached (because they register no errors or anything), so it looks like it comes from the server only, but what do I know. Thanks in advance! Update Since no response header, Prashant seems to suggest it's a server issue in his error since it worked on another server. http://stackoverflow.com/questions/11953132/no-response-obtained-while-implementing-cors Anyone know how to flip this switch? Headers work now Bad litespeed format. Should look like this. Still being denied though. Header set Access-Control-Allow-Headers X-Requested-With Header set Access-Control-Allow-Methods OPTIONS Header set Access-Control-Allow-Methods GET Header set Access-Control-Allow-Methods POST Header set Access-Control-Allow-Headers Content-Type Header set Access-Control-Allow-Headers Depth Header set Access-Control-Allow-Headers User-Agent Header set Access-Control-Allow-Headers X-File-Size Header set Access-Control-Allow-Headers X-Requested-With Header set Access-Control-Allow-Headers If-Modified-Since Header set Access-Control-Allow-Headers X-File-Name Header set Access-Control-Allow-Headers Cache-Control

    Read the article

  • Oracle Access Manager 10gR3 Certified with E-Business Suite

    - by Keith M. Swartz
    Oracle Access Manager 10gR3 (10.1.4.3) is now certified for use with E-Business Suite Releases 11.5.10 and 12.1, using the new component, Oracle E-Business Suite AccessGate. For information on how to obtain, install, and configure this new component, see:Integrating Oracle E-Business Suite with Oracle Access Manager using Oracle E-Business Suite AccessGate (Note 975182.1) About Oracle Access Manager Oracle Access Manager is Oracle's next-generation identity and access management platform, and is a key component in Oracle's Fusion Middleware Identity Management solution. It provides a set of authentication and authorization features, including support for single sign-on authentication, and integration with other identity management offerings such as Oracle Identity Federation and Oracle Adaptive Access Manager.

    Read the article

< Previous Page | 2 3 4 5 6 7 8 9 10 11 12 13  | Next Page >