Search Results

Search found 2379 results on 96 pages for 'nvidia prime'.

Page 6/96 | < Previous Page | 2 3 4 5 6 7 8 9 10 11 12 13  | Next Page >

  • Impossible quandrary involving UCK, graphics card, and Nvidia drivers

    - by InkBlend
    I have a computer that I want to install Ubuntu on. It is an older gaming computer with a Nvidia graphics card. When I attempt to boot any unmodified Linux distribution onto it, I get a "Boot error" message, which I assume is because the computer uses a discrete graphics card, which the Linux kernel does not have support for. Ordinarily, that would not be a problem, as I would just plug the monitor into the VGA port built in to the motherboard. However, this particular model of motherboard does not have an on-board graphics connector, so I am stuck with using the graphics card connection. That further would not be a problem; all I would have to do would be to use UCK to create a customized Ubuntu image that included the graphics drivers. Except for the fact that the Nvidia Linux drivers must be installed on a computer with a Nvidia graphics card present. So while using UCK, the driver installer fails with a message stating that there is no Nvidia graphics card present. How do I get Ubuntu on my desktop computer?

    Read the article

  • HDA NVidia (GT520) - Sound Issue

    - by Oliver Lucas
    I have an GT520 graphics card and I am trying to get the sound working with my XBMC setup and I'm having trouble. Things I have completed: aplay -l List of PLAYBACK Hardware Devices card 0: NVidia [HDA NVidia], device 3: HDMI 0 [HDMI 0] Subdevices: 1/1 Subdevice #0: subdevice #0 then lspci 01:00.1 Audio device: nVidia Corporation HDMI Audio stub (rev a1) and alsamixer which is set to unmuted Everything looks well, so ran: aplay -D hw:0,3 /home/ollie/Music/alex.mp3 Playing raw data '/home/ollie/Music/alex.mp3' : Unsigned 8 bit, Rate 8000 Hz, Mono aplay: set_params:1059: Sample format non available Available formats: - S16_LE - S32_LE with no luck.. then speaker-test Playback device is default Stream parameters are 48000Hz, S16_LE, 1 channels Using 16 octaves of pink noise Playback open error: -2,No such file or directory also tried running through ftp://download.nvidia.com/XFree86/gpu-hdmi-audio-document/gpu-hdmi-audio.html#upgrading_alsa_driver and http://wiki.xbmc.org/index.php?title=HOW-TO:Setup_audio_over_HDMI_on_nVidia_GeForce/nForce_controller plus 20 other websites with selective "fixes" etc.. but no luck _< I am a complete beginner with Ubuntu so this is a really steep learning curve for me, not sure I'm learning much though as its all just headaches atm! Thanks for any help Ollie

    Read the article

  • Problems with nvidia drivers

    - by Crs2489
    I have a problem that I haven't been able to find a solution to. I recently decided to switch from Windows to Ubuntu 11.10, so I originally installed Ubuntu using the wubi installer for windows. After I installed Ubuntu with wubi I installed drivers for nvidia using the additional drivers from system setting and everything worked fine. I then decided that I no longer wanted windows on my computer because i was having problems with it crashing when I went to remove the partition with windows on it using an Ubuntu Live CD I made I found that there were unrepairable problems with both of my partitions so I decided to delete both partitions and install Ubuntu again from the cd now when I try to install nvidia drivers my gui will not load when i start my computer. I have found people who have had similar problems with the gui not loading after installing nvidia drivers but no one who had there gui working after installing with wubi then not working after installing from a cd. I'm using Ubuntu 11.10 32 I have also tried other versions of linux like openSUSE and have had the same problem with the gui not being able to load after installing nvidia drivers.

    Read the article

  • Problem video nvidia ubuntu 12.04

    - by dragonov7
    I just did a fresh install of ubuntu 12.04 on my PC (Dell precision 370) but the video is not working as it should. Problems: When I log in to unity 3D I get a transparent bar (where the firefox, libre office, etc icons are) but I can see the tooltips when I put my mouse over where the icons are, I can see the top toolbar with no problem and I see just white on the rest of the desktop! When I log in using unity 2D I see the left bar cut in half (so I can't see the trash icon that is at the botton), the toolbar at the top shows OK and the desktop show OK but with some apps. For example, if I open a terminal and maximize it, it will only show just where the left toolbar "cuts". But if I open firefox it will open fine. Config: My PC comes with a nvidia quadro nvs 280 and I see that by default ubuntu is using the nouveau driver. Workarounds tried: I tried uninstalling the nouveau driver and the desktop works fine but I can use only unity 2D. I tried installing the nvidia-173 drivers using synaptic but I get "Could not apply changes! Fix broken packages first". I go to "Edit - Fix Broken packages" and I get the error: "E: Unable to correct problem, you have held broken packages.E: Error, PkgProblemResolver::Resolve generated breakes, this may be caused by held packages.E:Unable to correct dependencies" Output of lspci: 01:00.0 VGA compatible controller: NVIDIA Corporation NV37GL [Quadro PCI-E Series] (rev a2) Any idea so as to what I should do? Thanks in advance for any help. PS: Ah, the nvidia-173 driver was working fine on ubuntu 10.04.

    Read the article

  • NVIDIA graphics driver on Macbook Pro 10,1

    - by Boatzart
    I just installed 14.04 over my old 12.04 partition on my Macbook Pro 10,1 (which is dual-booting with OS X) by following the instructions here. The only difference is that I'm using rEFInd instead of rEFIt. The proprietary NVIDIA drivers worked great with 12.04, but now I'm unable to boot into Unity with it in 14.04. Generally, I just get a black screen after the Grub menu, though occasionally I get some kind of panic screen like this, where I see errors like: [drm: __gen6_gt_force_wake_mt_get] *ERROR* Timed out waiting for forcewake old ack to clear. [drm: __gen6_gt_wait_for_thread_c0] *ERROR* GT thread status wait timed out [drm: __intel_ring_setup_status_page] *ERROR* render ring: wait for SyncFlush to complete for TLB invalidation timed out etc. Using the nouveau drivers works fine, but everything feels sluggish so I would really like to get the NVIDIA drivers working. Has anyone successfully gotten the NVIDIA drivers working with the GT-650M Mac Edition?

    Read the article

  • GNOME Shell Overview animation is slow on my NVIDIA 320M

    - by AllanCaeg
    I'm running Ubuntu 10.10 on my MacBook Air 11" (late 2010 model 3,1). Compiz runs fine, as well as most of GNOME Shell's animations. The animation for switching to and from GNOME Shell overview is just very slow. Unfortunately, it's the most common animation on Shell. I already applied cd ~/gnome-shell/source/gnome-shell curl http://bugzilla-attachments.gnome.org/attachment.cgi?id=157326 > shell-animations-nvidia.patch git am shell-animations-nvidia.pat that I found from http://live.gnome.org/GnomeShell/SwatList , but the issue's still here. How do I fix this? EDIT: Apparently, it's an NVIDIA driver bug, which has something to do with the message tray. Is this correct? How do I go around this issue?

    Read the article

  • How do I rotate my monitor using xorg?

    - by user1106405
    I have just installed KUbuntu 12.10, and I am attempting to rotate my monitor 90 deg to the left. When I add the option to rotate, the monitor seems to ignore the directive. I'm currently using dual 02:00.0 VGA compatible controller: NVIDIA Corporation GF104 [GeForce GTX 460] (rev a1) 03:00.0 VGA compatible controller: NVIDIA Corporation GF104 [GeForce GTX 460] (rev a1) and NVidia driver version 310 My xorg.conf is as follows: # nvidia-settings: X configuration file generated by nvidia-settings # nvidia-settings: version 304.51 (buildd@komainu) Fri Oct 12 12:53:49 UTC 2012 # nvidia-xconfig: X configuration file generated by nvidia-xconfig # nvidia-xconfig: version 310.14 (buildmeister@swio-display-x86-rhel47-06.nvidia.com) Tue Oct 9 13:04:01 PDT 2012 Section "ServerLayout" Identifier "Layout0" Screen 0 "Screen0" 1280 0 Screen 1 "Screen1" RightOf "Screen0" Screen 2 "Screen2" 0 0 InputDevice "Keyboard0" "CoreKeyboard" InputDevice "Mouse0" "CorePointer" Option "Xinerama" "1" EndSection Section "Files" EndSection Section "InputDevice" # generated from default Identifier "Mouse0" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/psaux" Option "Emulate3Buttons" "no" Option "ZAxisMapping" "4 5" EndSection Section "InputDevice" # generated from default Identifier "Keyboard0" Driver "kbd" EndSection Section "Monitor" Identifier "Monitor0" VendorName "Unknown" ModelName "Samsung SyncMaster" HorizSync 30.0 - 81.0 VertRefresh 56.0 - 60.0 Option "DPMS" EndSection Section "Monitor" Identifier "Monitor1" VendorName "Unknown" ModelName "DELL 1908WFP" HorizSync 30.0 - 83.0 VertRefresh 56.0 - 75.0 EndSection Section "Monitor" Identifier "Monitor2" VendorName "Unknown" ModelName "DELL 1907FP" HorizSync 30.0 - 81.0 VertRefresh 56.0 - 76.0 EndSection Section "Device" Identifier "Device0" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "GeForce GTX 460" BusID "PCI:2:0:0" Screen 0 EndSection Section "Device" Identifier "Device1" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "GeForce GTX 460" BusID "PCI:2:0:0" Screen 1 EndSection Section "Device" Identifier "Device2" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "GeForce GTX 460" BusID "PCI:3:0:0" EndSection Section "Screen" # Removed Option "metamodes" "DFP-0: nvidia-auto-select +0+0; DFP-0: nvidia-auto-select +0+0; DFP-0: 1920x1200 +0+0; DFP-0: 1920x1200_60 +0+0; DFP-0: 1600x1200 +0+0; DFP-0: 1600x1200_60 +0+0; DFP-0: 1280x1024 +0+0; DFP-0: 1280x1024_60 +0+0; DFP-0: 1280x960 +0+0; DFP-0: 1280x960_60 +0+0; DFP-0: 1024x768 +0+0; DFP-0: 1024x768_60 +0+0; DFP-0: 800x600 +0+0; DFP-0: 800x600_60 +0+0; DFP-0: 800x600_56 +0+0; DFP-0: 640x480 +0+0; DFP-0: 640x480_60 +0+0; DFP-0: nvidia-auto-select @1920x1080 +0+0; DFP-0: nvidia-auto-select @1920x720 +0+0" Identifier "Screen0" Device "Device0" Monitor "Monitor0" DefaultDepth 24 Option "Stereo" "0" Option "metamodes" "DFP-0: nvidia-auto-select +0+0; DFP-0: nvidia-auto-select +0+0; DFP-0: 1920x1200 +0+0; DFP-0: 1920x1200_60 +0+0; DFP-0: 1600x1200 +0+0; DFP-0: 1600x1200_60 +0+0; DFP-0: 1280x1024 +0+0; DFP-0: 1280x1024_60 +0+0; DFP-0: 1280x960 +0+0; DFP-0: 1280x960_60 +0+0; DFP-0: 1024x768 +0+0; DFP-0: 1024x768_60 +0+0; DFP-0: 800x600 +0+0; DFP-0: 800x600_60 +0+0; DFP-0: 800x600_56 +0+0; DFP-0: 640x480 +0+0; DFP-0: 640x480_60 +0+0; DFP-0: nvidia-auto-select +0+0; DFP-0: nvidia-auto-select +0+0" SubSection "Display" Depth 24 EndSubSection EndSection Section "Screen" Identifier "Screen1" Device "Device1" Monitor "Monitor1" DefaultDepth 24 Option "Stereo" "0" Option "metamodes" "DFP-2: nvidia-auto-select +0+0" Option "Rotate" "left" SubSection "Display" Depth 24 EndSubSection EndSection Section "Screen" Identifier "Screen2" Device "Device2" Monitor "Monitor2" DefaultDepth 24 Option "Stereo" "0" Option "metamodes" "nvidia-auto-select +0+0" SubSection "Display" Depth 24 EndSubSection EndSection Section "Extensions" Option "Composite" "Enable" EndSection Edit: If I delete the xorg.conf and reboot, I am able to rotate my monitor, however, my third monitor is not recognized: Screen 0: minimum 8 x 8, current 3360 x 1200, maximum 16384 x 16384 DVI-I-0 disconnected (normal left inverted right x axis y axis) DVI-I-1 disconnected (normal left inverted right x axis y axis) DVI-I-2 connected 1920x1200+0+0 (normal left inverted right x axis y axis) 518mm x 324mm 1920x1200 60.0*+ 1600x1200 60.0 1280x1024 60.0 1280x960 60.0 1024x768 60.0 800x600 60.3 56.2 640x480 59.9 HDMI-0 disconnected (normal left inverted right x axis y axis) DVI-I-3 connected 1440x900+1920+0 (normal left inverted right x axis y axis) 408mm x 255mm 1440x900 59.9*+ 75.0 1280x1024 75.0 60.0 1280x800 59.8 1152x864 75.0 1024x768 75.0 70.1 60.0 800x600 75.0 72.2 60.3 56.2 640x480 75.0 72.8 59.9

    Read the article

  • Mint 13 no longer using NVidia card after restart

    - by GenericUsrnme
    Here's the story; I bought a new graphics card, along with other parts, about a week ago. I put them in, install new drivers everything's working fine. Now after a restart I boot into some lovely 1024x768 resolution with only one screen on. I check in the NVidia X Server settings to see if my screen was changed there, there's nothing there except Application profiles and nvidia-settings. I check hardinfo to see if the card is actually recognised; VGA compatible controller: NVIDIA Corporation GK106 [GeForce GTX 660] (rev a1) (prog-if 00 [VGA controller]) I don't really know much about the graphics end of things so I'm not sure what I should be doing here to fix this, I don't even know what I should be looking FOR even, so any help is much appreciated! Thanks in advance

    Read the article

  • Issues with nVidia GeForce 210 while watching movies

    - by David ???
    Ever since 10.04 I have been trying to resolve an issue with my graphics card - nVidia GeForce 210. I'm having issues when I watch movies - they are jumping all the time, even with Compiz disabled and when that is the only thing I am doing. I have tried the solution to How to get NVidia GeForce GT 210 drivers working on Lucid Lynx? but it didn't work. How can I fix this? Here are the steps I took: apt-get --purge remove xserver-xorg-video-nouveau edit /etc/default/grub to add the line GRUB_CMDLINE_LINUX="nouveau.modeset=0" sudo update-grub Reboot Download official Linux drivers from nVidia site. sh filename-of-downloaded-driver-package

    Read the article

  • Issues with nVidia GeForce 210 while watching movies

    - by David ???
    Ever since 10.04 I have been trying to resolve an issue with my graphics card - nVidia GeForce 210. I'm having issues when I watch movies on 10.10 - they are jumping all the time, even with Compiz disabled and when that is the only thing I am doing. I have tried the solution to How to get NVidia GeForce GT 210 drivers working on Lucid Lynx? but it didn't work. How can I fix this? Here are the steps I took: apt-get --purge remove xserver-xorg-video-nouveau edit /etc/default/grub to add the line GRUB_CMDLINE_LINUX="nouveau.modeset=0" sudo update-grub Reboot Download official Linux drivers from nVidia site. sh filename-of-downloaded-driver-package

    Read the article

  • Need a non-X terminal for the nvidia driver installation

    - by broiyan
    When I try to install the nvidia driver for my video card, I receive an error message. ERROR: You appear to be running an X server; please exit X before installing. For further details, please see the section INSTALLING THE NVIDIA DRIVER in the README available on the Linux driver download page at www.nvidia.com. I wasn't able to find the README on the website but how do I create a terminal that is non-X? I am on 12.04.

    Read the article

  • NVidia control panel SSAO not working

    - by János Turánszki
    I am just before implementing screen space ambient occlusion in my game, but first I wanted to try enabling it from NVidia control panel only to find out that it is greyed out so that I can not enable it. With this I could enable SSAO for some other games, but not every one. I know this technique requires the depth buffer and (optionally) a normal map texture to sample information from which I already have access to given I have a deferred renderer working. After that I actually thought to roll back to a previous version of my game which still uses forward rendering so the depth buffer is actually bound to the backbuffer which I render to from the get-go so that maybe the NVidia control panel would somehow make use of it. It was not working with forward rendering either. (I also tried FXAA in the control panel and that works - but it doesn't need any depth or normal texture) So my question is that how can I enable this function so that it would work by enabling it in the NVidia control panel?

    Read the article

  • Do Nvidia's drivers work in 12.10?

    - by Pratyush Nalam
    I recently upgraded to 12.10 and was just checking for proprietary drivers to be installed. I found this in software sources When I enabled Nvidia binary Xorg driver, unity disappears along with the launcher and everything. I just have the wallpaper. I did manage to open the terminal and open software sources and select the nouveau display driver which fixed it. Question is how to enable NVIDIA binary Xorg driver and have everything working? Hardware: Apple MacBook Pro 9,1 Mid 2012 15 inch non-retina. NVIDIA GeForce GT650M EDIT: I tried the solution here. And now, when I boot into Ubuntu, I get a blinking cursor. That's all! No tty1, nothing. help !!

    Read the article

  • Ubuntu 13.10 - Black screen after logging in after installing nVidia drivers

    - by Javacow
    I recently installed Ubuntu 13.10 in a dual-boot with Windows 7, so I'm still quite new to using Linux. Most things were working fine, and I could log in normally (apart from the first login after install, which spent about 2 minutes on a black screen before going to the desktop). I installed the restricted Nvidia drivers with the command: sudo apt-get install nvidia-current Since then, after I enter my password and log in (the login screen itself works perfectly), I get a black screen with the cursor and nothing happens from that point onwards. Basically, what I would like to know is how to get back to the normal Ubuntu desktop and (hopefully) still be able to use Nvidia drivers.

    Read the article

  • No desktop after installation of nvidia drivers

    - by hovmand
    I have a problem very similar to this guy: Desktop does not show when I installed nvidia drivers!. I have the same problem with the desktop not being present when I install choose the nvidia drivers from the software sources dialog. I've trie the answer mark as the solution, but this doesn't help me. Still get the same result / bug. I've also tried just to reconfigure it, like this guy says: http://ubuntuforums.org/showpost.php?p=12303179&postcount=4, but that didn't help me either. Then someone suggested that I should try Bumblebee. I followed the installation (https://wiki.ubuntu.com/Bumblebee#Installation) and after the reboot the resolution was still crappy, but this time the desktop did show up, but with bad graphics and I couldn't use optirun and it turned out that bumblebee couldn't start. I hope someone might know whats wrong or what I'm doing wrong. I have a Lenovo W520 with a nvidia Quadro FX 880M and I'm running ubuntu 12.10

    Read the article

  • It appears you are running a x server NVIDIA Drivers 304.02 Ubuntu 12.04

    - by user93444
    So I went to NVIDIA's site and I saw they had a version with a lot of bug fixes. http://www.geforce.com/drivers/results/49073 and I downloaded it, I ran the .run file rooted. It keeps saying "It appears you are running a x server" I don't have any current NVIDIA driver installed, I tried the nvidia x-config thing but that didn't work. It just says it can't be found. Should I wait until that version gets on Ubuntu's software center? I don't feel like installing their old and bad version of the drivers.

    Read the article

  • Dual Screens not working nVidia

    - by user91396
    So I'm very much an Ubuntu noob, in fact I just install Ubuntu to my P.C. and I started it up with both my screens plugged into my nVidia's dvi and vga ports and logged in, change the skin to classic gnome, because that's how it was when I last used Ubuntu (8.1), and both screens were working separately. The trouble is that I got a notification saying there was nVidia drivers to be installed, so I install them and restart my P.C., as it told me to, and when I get back on only one of my screens is working and when I go into Displays (All Settings, Displays) it doesn't register my other screen at all, and it calls my working screen "Laptop". I've tried looking through several pages of Google but I see no answer. I did try to find the nvidia-settings to see if that had the answers but sadly I couldn't locate it. Thanks in advance for any help, but please remember, I am very new to Ubuntu.

    Read the article

  • Ubuntu 11.10 problem with Nvidia

    - by dariush
    I have an acer with a Gforce graphics card. I installed ubuntu 11.10 and it was working properly until I installed Nvidia drivers via additional drivers, I hit "nvidia-xconfig" in terminal and then reboot. At startup lightdm fails to start. I changed /etc/X11/xorg.conf file back to default and reboot. It works properly, but with the default Ubuntu driver. I want to reconfigure Nvidia and use it. Can anyone tell me what should I do?

    Read the article

  • Four monitor setup with two Nvidia graphics cards

    - by user94329
    I'm running Ubuntu 12.04 and I have two nVidia quadro 2000 video cards, each with two monitors plugged in (all 4 monitors are identical). Now I have the latest nVidia drivers, and I'm trying to use the nVidia control panel to use all four monitors, and I can't get it to work. Currently, my configuration is using TwinView to have 2 monitors per X screen. This doesn't work well because either i turn xinerama on, and nothing appears on the screen when I start a X session with Compiz enabled. Things only work in Ubuntu 2D. i turn xinerama off, and compiz works, but now, I cant drag windows between the two screens and i have no idea how to start applications in the other screen. Is there a better way to configure my four monitor setup? Is there a way to get both GPUs onto a single X screen?

    Read the article

  • nVidia GT 220 not working properly with Ubuntu 12.10

    - by Glaedr
    I used to enable proprietary nVidia drivers on every previous Ubuntu release to get it working properly (elseway I was forced to a very low resolution and no graphic acceleration), and everything worked fine then. In particular, I noticed - still I don't know why - that the GPU fan on every OS gets noisy until the video drivers are loaded (runlevel 5, it seems, in Linux), and then slows down to a normal speed. Today I installed 12.10. Running the Live CD, surprisingly, everything was working fine: full resolution, acceleration, silent fan, and so on. The running driver was nvidia-current (GT 216). After installing and booting I found that the fan was overrunning. The installed driver is nouveau. I tried installing nvidia-current, or any other proprietary driver, even installing the kernel headers & source and then the drivers (as suggested here), but all I'm getting with proprietary drivers is, the irony, low resolution, noisy fan and no acceleration (thus obviously unity and compiz refusing to start). Does anybody know a way out?

    Read the article

  • Extension GLX missing...on a desktop PC

    - by Bart van Heukelom
    I just installed Ubuntu 12.10 on a new PC with an Nvidia GTX 560 graphics card, but after installing the Nvidia proprietary drivers (either -current or -current-updates), Unity won't start. When trying to start it manually I get the message "extension GLX missing". I've searched around and found results like this question which point out it's a problem with Nvidia Optimus laptops. However, I don't have this problem on a laptop, but on a desktop PC. lshw output for the graphics card: *-display description: VGA compatible controller product: GF114 [GeForce GTX 560 SE] vendor: NVIDIA Corporation physical id: 0 bus info: pci@0000:01:00.0 version: a1 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress vga_controller bus_master cap_list rom configuration: driver=nouveau latency=0 resources: irq:16 memory:f4000000-f5ffffff memory:e0000000-e7ffffff memory:e8000000-ebffffff ioport:e000(size=128) memory:f6000000-f607ffff and CPU: *-cpu description: CPU product: Intel(R) Core(TM) i5-3570K CPU @ 3.40GHz vendor: Intel Corp. physical id: 40 bus info: cpu@0 version: Intel(R) Core(TM) i5-3570K CPU @ 3.40GHz slot: SOCKET 0 size: 1600MHz capacity: 3800MHz width: 64 bits clock: 100MHz capabilities: x86-64 fpu fpu_exception wp vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx rdtscp constant_tsc arch_perfmon pebs bts rep_good nopl xtopology nonstop_tsc aperfmperf pni pclmulqdq dtes64 monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr pdcm pcid sse4_1 sse4_2 popcnt tsc_deadline_timer aes xsave avx f16c rdrand lahf_lm ida arat epb xsaveopt pln pts dtherm tpr_shadow vnmi flexpriority ept vpid fsgsbase smep erms cpufreq configuration: cores=4 enabledcores=4 threads=4

    Read the article

  • Xlib: extension "GLX" missing on display ":0". Asus k53s

    - by Steve
    I had everything working fine, I use a number of openGL graphics software, example pymol, mgltools, vmd, ballview, rasmol etc. All of these give the error: Xlib: extension "GLX" missing on display ":0". and fail to initialize. I have an i7 asus k53s with nvidia gforce I need these to do my work. I tried the umblebee fix, and just removing all nvidia drivers, or rolling back. I do not know why these were working then stopped, but did notice a new nvidia console in the mu which I assume was from enabling the automatic nvidia feeds, etc? I also played with the xorg, however have no clue what settings are valid. In addition, the display is 50% of the time not recognized now? It just gives a geeic 640x480 and I have to login and out 10 times to get it to return to a normal setting. When I try and set it manual, there is no other setting allowed from the settings menus, and the terminal changes just get re set every time I log out?

    Read the article

  • Windows 8, NVIDIA graphics recognition fails

    - by Roy Grubb
    I just installed Windows 8 Pro OEM 64-bit (clean install) and it won't properly recognize my graphics adapter. When I installed Win8, it automatically installed the BasicDisplay.sys driver dated 6/21/2006. 6.2.9200.16384 (win8_rtm.120725-1247). Hardware - Mobo:MSi G41M-P33 Combo CPU:Intel CoreDuo 6600 Graphics:NVIDIA GeForce 9400GT *OS* - Windows 8 Pro 64-bit OEM The graphics adapter worked fine in Windows XP. The PC is a generic box, bought locally and its mobo failed recently, so I replaced it with the G41M. Microsoft wouldn't let me re-activate Windows XP with a different mobo, so I installed Win8, which appears to work except as described next. Win8 only partially recognizes the graphics adapter and won't allow NVIDIA latest driver installer to see that it's an NVIDIA card. As a result, OpenGL doesn't work, and this is needed by the software I most use. Other than that the graphics look OK. When I say 'partially recognizes', I mean that via the Control Panel, I can see that the adapter is described as NVIDIA, but the driver remains stuck at Microsoft Basic Display Adapter no matter what I try, including "Update driver..." in adapter properties. Display Screen Resolution Advanced Settings Adapter shows: Adapter Type: Microsoft Basic Display Adapter Chip Type: NVIDIA DAC Type: NVIDIA Corporation Bios Information: G27 Board - p381n17 Don't know what this means ... no mention of 9400GT Total Available Graphics Memory: 256 MB Dedicated Video Memory: 0 MB In fact the adapter has 512MB on-board video memory. System Video Memory: 0 MB Shared System Memory: 256 MB And Control Panel Device Manager Display adapters just shows Microsoft Basic Display Adapter. No other graphics adapter, and no unknown device or yellow question mark. What I have tried so far: 1. Cleared CMOS and reset. Updated BIOS and all mobo drivers as follows: 1st I used Driver Reviver to see if any driver updates were required. It found some but I didn't use that to get the drivers. Then I switched to MSi's own mobo driver utility Live Update 5. This also showed the board needed to update several so I used it to fetch the new drivers. After that it showed that everything was up to date and I checked with Driver Reviver again, which also reported no drivers now needed updating. Rebooted. Went to the NVIDIA site to get the latest graphics adapter driver. Their auto-detect "Option 2: Automatically find drivers for my NVIDIA products" said "The NVIDIA Smart Scan was unable to evaluate your system hardware. Please use Option 1 to manually find drivers for your NVIDIA products." So I downloaded 310.70-desktop-win8-win7-winvista-64bit-international-whql.exe, which lists 9400 GT under supported products, but when I run it, it says: "NVIDIA Installer cannot continue This graphics driver could not find compatible graphics hardware." Connected the display to the on-board Intel graphics (G41 Intel Express), removed the NVIDIA card and rebooted, changed to internal graphics in CMOS. Again it installs the MS Basic Display Adapter, and can't properly run my s/w that needs OpenGL. It runs on other machines with Intel Express graphics (WinXP and 7) Shut down and pulled out the power cord. Held start button to discharge all capacitors. Removed and re-inserted NVIDIA adapter in PCI-E slot and made sure properly seated. Connected the monitor to the card, screwed plug to socket. Reconnected power cord. Started and checked in BIOS that Primary Graphics Adapter was set to PCI-E. Started Windows. Uninstalled MS Basic Display Adapter in Device Manager. Screen blanks briefly, reappears. No Graphics adapter entry was then visible in Device Manager. Restarted PC. MS Basic Display Adapter Visible again in Device Manager. Clicked in Device Manager View Show hidden devices. No other graphics adapter appears, no unknown devices. Rebooted. Tried Scan for Hardware changes. None detected. Tried right-click on MS Basic Display Adapter Properties Driver Update Driver... Search automatically. It replied that it had determined driver was up to date. I checked that there were no graphic driver-related entries in Programs and Features that I could delete (none). Searched for any other drivers with nvidia in their name and deleted them, just keeping the 306.97 installer exe file. Did a Windows Update. Ran GPU-Z which shows (main items): Microsoft Basic Display Adapter GPU G72 BIOS 5.72.22.76.88 Device ID 10DE - 01D5 DDR2 Bus Width 32 Bit Memory size 64MB Driver Version nvlddmkm 6.2.9200.16384 (ForceWare 0.00) / Win8 64 NVIDIA SLI Unknown in the drop-down at the foot, "Microsoft Basic Display Adapter" is the only option If I swap hard disks in that machine to one with a Ubuntu 10.4 installation (originally installed on the same PC), lspci shows "VGA compatible controller as NVIDIA Corporation Device 01d5 (rev a1) (prog-if 00 [VGA controller])" and "kernel driver in use: nvidia" I'm out of ideas for new things to try and would be really grateful of suggestions. Thanks!

    Read the article

  • 12.10 unable to install or even run from Live CD with nVidia GTX 580

    - by user99056
    I've used Ubuntu in the past (set up as web server, etc over in Iraq), so I'm not a 100% Linux Noob, however, I'm running into a brick wall here. I've got a machine I built when I got back to the US earlier this year, running Windows 7 Ultimate on it, and I've now got some free time and would like to transition over to Ubuntu full time. I've searched around in the forums, and there seems to be an issue with the nVidia graphics cards, so I've tried going to the EVGA site to see if I could find a new BIOS update for it and had no luck, so I'm back searching the forums here again and decided to just go ahead and post my question. My apologies if this is covered in another post and I was just unable to find it. I've found a few 'similar' posts, but nothing as bad as my issue. With the history aside, here is the actual detailed issue: I purchased a new SSD (Intel 520 SSD), arrived today, and I disconnect my old Windows 7 SSD. I had pre downloaded the ubuntu-12.10-desktop-amd64 earlier today and burned it to DVD. Upon inserting the Live CD into the computer and booting up, everything was fine up to the 'Run From Live CD' or 'Install Ubuntu Now' buttons. As I was sure I wanted to go ahead and make the switch, I selected the 'Install Now' from the right hand side. CD Spins up, black window pops up, and then the errors started: date/time GPU Lockup date/time Failed to idle channel 1 date/time PFIFO - playlist update failed date/time Failed to idle channel 2 date/time PFIFO - playlist update failed Thinking it might correct itself, I let it run and it would swap over to a GUI Screen that was locked up with major blurring/etc, then back to the command line with the errors. Eventually it said something along the lines of 'unknown status' and switched back to the GUI and froze. So, that's when I tried to see if I could find a BIOS upgrade for the nVidia GTX580 cards, and had no luck. So I thought, why not try to just run it from the Live CD and see if I can at least get a look at it, maybe if I could get it running try to do some sort of install from there and fix the driver issue. I rebooted, brought up the Live CD, and this time chose the left option / run from the CD. It brought me all the way in to the desktop, I saw my drives, the other icons, could move the mouse, etc for about 30 seconds and then it locked up completely. I've tried this a couple of times and get the same results every time. Hardware: Intel i7-3930K CPU @ 3.2GHz (12 CPUs) / MSI MS-7760 Motherboard / 32GB RAM / 2 x EVGA (nVidia) GeForce GTX 580 (4GB Ram each) So the question is: Is there any way to install 12.10 if you can't even get the Live CD to run (for more than 30 seconds)? My current hardware configuration is both of the GTX 580 cards have an SLI jumper on them, and I have 2 monitors on each card. (Ubuntu info obviously only shows on the main monitor from the failed installation and the attempt at running the Live CD). Perhaps opening the machine back up and removing the SLI Jumper and removing the other 3 monitors (so it only would have 1 video card with one monitor on it) would actually allow me to get 12.10 installed, then I could work on an nVidia Video Driver fix for the GTX 580, and then possibly hook up the other video card and monitors? Or is this something that they are currently aware of and may update with a future release in the next few days/weeks? Any thoughts or suggestions would be greatly appreciated, as I can't even try to fix the issue (assuming it is the nVidia drivers) if I can't even get it to install at all.

    Read the article

  • Need to run `nvidia-xconfig` before booting

    - by RobinJ
    I formatted my whole hard drive, and installed Elementary OS (Ubuntu 10.10) on it in an attempt to get rid of all the problems. It failed. Every since I installed the nvidia-current drivers I first need to boot into recovery mode, and run sudo nvidia-xconfig before booting the system in the normal way. If I don't do this, it will just stop at a black screen after the boot screen, responding to nothing but CTRL+ALT+DELETE and the power button. When I boot the system after running the nvidia-xconfig command I can just start working as usual. Update I suspect it's got something to do with Plymouth. I shall have to try it again before I can confirm it, but removing the quiet and splash parameters from the kernel line in /boot/grub/grub.cfg seems to help. But still, I like my Plymouth screen. A black screen with text rolling over it (or without the text) doesn't attract me much.

    Read the article

< Previous Page | 2 3 4 5 6 7 8 9 10 11 12 13  | Next Page >