repo man - Page 6 - Developer IT

How do I backup a git repo?

- by acidzombie24

I am planning to switch from SVN to git. With svn I just copy my repo folder when I want to back it up. However git doesn't have one so what do I do? Should I create a clone on a separate drive and update by pulling from my project? Then I can burn/archive this folder and it will have all the history? This is probably obvious but I want to make sure when it comes to backups. I still pretend there is a root repository.

Read the article

Setting up central git repo on local Mac network

- by Dashman

We are a team of three, all working on our local machines on the same internal network. We will all be working on websites in local working copies of the same Git repo hosted on Github. We have an internal staging machine here (dev.internal), and I am looking for a way for us to be able to push to this machine. At each milestone in the development cycle. In essence, all I really want us to be able to do is add the dev.internal machine as a remote, and push to this whenever we are ready. Could somebody please point me in the right direction to get this set up?

Read the article

GNU info pages BLOW

- by mbac32768

How many times have you looked up a man page only to discover that it's useless and you're told to view the info page instead? Well, info is an abortion and I refuse to use it. How do you cope? Lets the healing begin. Curious if anyone has a nifty 'man' wrapper that auto-magically probes for an info document and converts that into a man page on-the-fly.

Read the article

dead man's switch for remote networking interventions

- by ascobol

Hi, As I'm going to change the network configuration of a remote server, I was thinking of some security mechanisms to protect me from accidentally loosing control on the server. The level-0 protection I'm using is a scheduled system reboot: # at now+x minutes > reboot > ctrl+D where x is the delay before reboot. While this works relatevly well for very simple tasks like playing with iptables this method has at least two drawbacks: It's not very reactive, ie a connectivity problem should be detected automatically if for example an automatic remote ssh command fails does not work anymore for x seconds. It can obviously not work if one need to modify some configuration files and then reboot to test the changes. Are you guys using some tool for the second point ? I would love to have something able to revert the system configuration in a previously known stable state if I can't join the server X minutes after reboot. Thanks!

Read the article

Using screen, commands like less and man don't clear the screen afterwards

- by Boldewyn

In contrast to this question I want the clearing of the screen re-enabled for less. It works fine in my xterm terminal under Cygwin/mintty or Gnome Terminal (both xterms). However, when inside a screen session, the clearing of the screen is somehow disabled. I tried several things, like screen -T xterm or putting the autonuke statement in my ~/.screenrc. Also, inside the screen session export TERM=xterm tset has no effect. So, now I'm out of ideas. Any help appreciated.

Read the article

Any 3rd party tools that integrate IIS management with some sort of application inventory/change man

- by NoCarrier

I've got an environment with several IIS 6 web servers hosting hundreds of apps (dozens of sites, hundreds of virtual directories) all with a myriad of different configurations belonging to dozens of different developers (all deploying apps willy nilly). Is there some sort of managed software solution that will centralize management of all my IIS6 environments provide some inventory functionality allow for reporting or querying of said application inventory enforce and automate some sort of deployment process?

Read the article

GitHub solution for personal repo

- by Luke Maurer

So I've got my private SVN repo on my home server, and it has maybe 30 different modules thrown together in it, ranging from abortive throw-away larks to a few endeavors that might actually go somewhere someday. But a recent filesystem failure (BTW, never ever EVER use XFS without a battery-backed hardware RAID) has me spooked and thinking of using a DVCS for all that. I've also just had quite the swig of the Git koolaid, and I've been working with GitHub of late, so that's where I'm looking right now. Of course, it would be silly to shell out major cash for a separate private Git repo for every little project, and I don't want to have to be selective about what I throw up there (I love all my children :-D ), so I'll have to be somewhat creative about this. I can happily use SSH to my home box to use Git the way I've been using SVN, and I'm thinking from there I could amalgamate everything into, say, a big project with 30 submodules, which I then push to GitHub. What'd be a sane way to set this up? Does using submodules sound feasible? How do I sync it all to my private GitHub repo? Cron job? Git hook? I'd love to hear it if anyone's done something similar. I'm not really married to Git or GitHub, so a sufficiently compelling feature of another solution might sway me. But if your answer does involve a different system (especially a different VCS), be advised it'll be a tougher sell :-)

Read the article

GitHub solution for personal repo

- by Luke Maurer

So I've got my private SVN repo on my home server, and it has maybe 30 different modules thrown together in it, ranging from abortive throw-away larks to a few endeavors that might actually go somewhere someday. But a recent filesystem failure (BTW, never ever EVER use XFS without a battery-backed hardware RAID) has me spooked and thinking of using a DVCS for all that. I've also just had quite the swig of the Git koolaid, and I've been working with GitHub of late, so that's where I'm looking right now. Of course, it would be silly to shell out major cash for a separate private Git repo for every little project, and I don't want to have to be selective about what I throw up there (I love all my children :-D ), so I'll have to be somewhat creative about this. I can happily use SSH to my home box to use Git the way I've been using SVN, and I'm thinking from there I could amalgamate everything into, say, a big project with 30 submodules, which I then push to GitHub. What'd be a sane way to set this up? Does using submodules sound feasible? How do I sync it all to my private GitHub repo? Cron job? Git hook? I'd love to hear it if anyone's done something similar. I'm not really married to Git or GitHub, so a sufficiently compelling feature of another solution might sway me. But if your answer does involve a different system (especially a different VCS), be advised it'll be a tougher sell :-)

Read the article

Ant get task throws "get doesn't support nested resources element" error

- by David Corley

The following ant xml should work according to documentation, but does not. Can anyone tell me if I'm doing something wrong. The get task should support the nested "resources" element in Ant 1.7.1 which is the version I'm using: -- <target name="setup"> <tstamp/>     <property name="framework_wa" value="../../../framework"/> <property name="xpbuw_wa" value="../../../xpbuw"/> <property name="xpb_wa" value="../../../xpb"/> <property name="bil_wa" value="../.."/>  <property name="out" value="${user.dir}"/>  <property name="locale" value="us"/>  <property name="contextRoot" value="xpertBridge"/> <property name="build_dir" value="${out}/${release}/build"/> <property name="distrib_dir" value="${out}/${release}/distrib"/> <property name="build.number" value="-1"/>  <get dest="${lib}"> <resources> <url url="http://repo.fms.allfinanz.com/service/local/artifact/maven/redirect?r=central&g=soap&a=soap&v=2.3.1&e=jar"/> <url url="http://repo.fms.allfinanz.com/service/local/artifact/maven/redirect?r=JBOSS&g=apache-fileupload&a=commons-fileupload&v=1.0&e=jar"/> <url url="http://repo.fms.allfinanz.com/service/local/artifact/maven/redirect?r=thirdparty&g=regexp&a=regexp&v=1.1&e=jar"/> <url url="http://repo.fms.allfinanz.com/service/local/artifact/maven/redirect?r=thirdparty&g=javax.mail&a=mail&v=1.2&e=jar"/> <url url="http://repo.fms.allfinanz.com/service/local/artifact/maven/redirect?r=thirdparty&g=com.ibm.ws.webservices&a=webservices.thinclient&v=6.1.0&e=jar"/> <url url="http://repo.fms.allfinanz.com/service/local/artifact/maven/redirect?r=thirdparty&g=avalon-framework&a=avalon-framework&v=4.2.0&e=jar"/> <url url="http://repo.fms.allfinanz.com/service/local/artifact/maven/redirect?r=thirdparty&g=jimi&a=jimi&v=1.0&e=jar"/> <url url="http://repo.fms.allfinanz.com/service/local/artifact/maven/redirect?r=thirdparty&g=batik&a=batik-all&v=1.6&e=jar"/> <url url="http://repo.fms.allfinanz.com/service/local/artifact/maven/redirect?r=thirdparty&g=bsf&a=bsf&v=2.3.0&e=jar"/> <url url="http://repo.fms.allfinanz.com/service/local/artifact/maven/redirect?r=thirdparty&g=rhino&a=js&v=1.5R3&e=jar"/> <url url="http://repo.fms.allfinanz.com/service/local/artifact/maven/redirect?r=central&g=commons-io&a=commons-io&v=1.1&e=jar"/> <url url="http://repo.fms.allfinanz.com/service/local/artifact/maven/redirect?r=central&g=commons-logging&a=commons-logging&v=1.0.4&e=jar"/> <url url="http://repo.fms.allfinanz.com/service/local/artifact/maven/redirect?r=thirdparty&g=xmlgraphics&a=commons&v=1.0&e=jar"/> <url url="http://repo.fms.allfinanz.com/service/local/artifact/maven/redirect?r=thirdparty&g=barcode4j&a=barcode4j&v=trunkBIL&e=jar"/> <url url="http://repo.fms.allfinanz.com/service/local/artifact/maven/redirect?r=thirdparty&g=com.ibm&a=fmcojagt&v=6.1&e=jar"/> <url url="http://repo.fms.allfinanz.com/service/local/artifact/maven/redirect?r=thirdparty&g=com.allfinanz&a=ejbserversupport&v=1.0&e=jar"/> <url url="http://repo.fms.allfinanz.com/service/local/artifact/maven/redirect?r=thirdparty&g=com.sun&a=jce&v=1.0&e=zip"/> <url url="http://repo.fms.allfinanz.com/service/local/artifact/maven/redirect?r=thirdparty&g=ssce&a=ssce&v=5.8&e=jar"/> <url url="http://repo.fms.allfinanz.com/service/local/artifact/maven/redirect?r=thirdparty&g=com.ibm&a=mq&v=5.1&e=jar"/> <url url="http://repo.fms.allfinanz.com/service/local/artifact/maven/redirect?r=thirdparty&g=com.ibm&a=mqjms&v=5.1&e=jar"/> <url url="http://repo.fms.allfinanz.com/service/local/artifact/maven/redirect?r=thirdparty&g=NetServerRemote&a=NetServerRemote&v=1.0&e=jar"/> <url url="http://repo.fms.allfinanz.com/service/local/artifact/maven/redirect?r=thirdparty&g=NetServerRMI&a=NetServerRMI&v=1.0&e=jar"/> <url url="http://repo.fms.allfinanz.com/service/local/artifact/maven/redirect?r=thirdparty&g=jwsdp&a=saaj-api&v=1.5&e=jar&c=api"/> <url url="http://repo.fms.allfinanz.com/service/local/artifact/maven/redirect?r=thirdparty&g=jwsdp&a=saaj-impl&v=1.5&e=jar&c=impl"/> <url url="http://repo.fms.allfinanz.com/service/local/artifact/maven/redirect?r=thirdparty&g=org.apache.xmlgraphics&a=fop&v=0.92b&e=jar"/> <url url="http://repo.fms.allfinanz.com/service/local/artifact/maven/redirect?r=thirdparty&g=xerces&a=dom3-xml-apis&v=1.0&e=jar"/> <url url="http://repo.fms.allfinanz.com/service/local/artifact/maven/redirect?r=thirdparty&g=org.apache&a=derbynet&v=10.0.2&e=jar"/> <url url="http://repo.fms.allfinanz.com/service/local/artifact/maven/redirect?r=thirdparty&g=com.sun&a=jsse&v=1.0&e=jar"/> </resources> </get> </target>

Read the article

C++ man pages in Ubuntu

- by Phenom

In Ubuntu linux I can't get any man pages for C++ keywords. Is there some kind of package I can install to fix this?

Read the article

Oracle ACE????????

- by Kazuhiro.Yamaguchi

?????????Oracle ACE?????????????????????????????2????????????????,?????????????????????????????????????????????????????????????????????????? ·?????? ·11g R2 for Windows ?????? ?????????????????????????????????????????????????????????????????????????????????50?????????????????????????????????????????????????????????????????????????! ???????????????????????????????????? wmo6hash::blog 2010/05/29(Sat) Iron Man 2 ????????????????(?)?????????????????????????????????????????????????????? ????: ????????????????????????????????????????????????????????????????????????????????????????????????????????2????????????????????????????????????????????????????????????????????CEO ????????????????????????????????????????????????????????????? ????: ?(??????)1?????????????!?????Marvel????????????????????????????·??????????????·???????????????????????????2????????·?????????????????????????????????????????????????(?)???????????????????????????????·???????????????????AI???????????IT??????????CEO????·????????????!?????????????????????????????(?)?????????????????? Oracle ACE???????????????????!(???:??????:????) ??????????????2???????????????????????????????????????????????? ???????2???????? - 3????=3????????! ????????????????????????????????·??????????????????????????????????????????????????????????·????????????SF????·?????????????????????????????????????

Read the article

Using sub-repo with hgwebdir difficulties in mercurial

- by Ton

Allright I got myself in a deadlock with Mercurial and sub-repos... Here's what happenend: I had a large mercurial repo that I server via apache and hgweb.cgi. Due to the size of the repo I decided to move to sub-repositories and share these with hgwebdir.cgi. Using the convert tool with the filemap option I created several sub-repositories: /main/foo /main/bar Nicely created an entry for the sub-repositories in .hgsub: foo = foo bar = bar And set hgwebdir.cgi up to show $/** as the root folder. Now when I went to my site (foo.com/hg) I saw my sub-repositories with one empty reposory among them (no name, no content), but I could not download it (archive location unknown): That was allright until I added a new sub-repository. I could not push the new .hgsub file to foo.com/hg, since that page is served by hgwebdir. The only method I can work currently is switch from hgwebdir to hgweb, commit .hgsubste and switch back to hgwebdir. Does someone have a good setup for such a mess?

Read the article

A better way of switching between Android source versions

- by dan

I would like to be able to switch between various android releases (1.0, 1.5, 2.0, etc.) and then access them via the file system to copy all files for that version into a tarball. Currently I am just running repo init -u <source URL> -b release-1. to get each version (changing the tag for each version I need). If this was a single git, I could check out the branch/tag I needed and the prject directory would "morph" to reflect then and I could just tar that folder. since the android source is split into multiple git repositories controlled by repo I have not yet found a way to change this other then the method mentioned above. any suggestions are appreciated.

Read the article

How to push a new local branch to remote repo and track it too [git]

- by Roni Yaniv

I tried looking for a an answer to this, but couldn't find any which address this specific need. Which is weird. I want to be able to do the following: create a local branch based on some other (remote or local) branch (via git branch or git checkout -b) push the local branch to remote repo (publish), but make it trackable so git pull and git push will work immediately. How do I do that? EDIT: I know about --set-upstream in git 1.7, but that is a post-creation action. i want to find a way to make a similar change when pushing the branch to the remote repo.

Read the article

Git: how do you merge with remote repo?

- by Marco

Please help me understand how git works. I clone my remote repository on two different machines. I edit the same file on both machines. I successfully commit and push the update from the first machine to the remote repository. I then try to push the update on the second machine, but get an error: ! [rejected] master -> master (non-fast-forward) I understand why I received the error. How can I merge my changes into the remote repo? Do I need to pull the remote repo first?

Read the article

Syncronize an SVN repo (svnsync) with encoding errors

- by Hamish

Is it possible to fix/bypass non-UTF8 encoded svn:log records when syncronizing repositories with svnsync? Background I'm in the process of taking over the maintenance of an open source module that is stored within a large (well over 10,000 revisions) subversion (1.5.5) repository. I do not have admin access to the remote repository to dump/filter/load the module. The old repository is being discontinued and I am trying to sync the original sub module to my local (1.6+) repository with svnsync. For example: svnsync file://home/svn/temp-repo/ http://path.to.repo/modulename/ The problem is that the old repository didn't enforce UTF8 encoding and I'm hitting errors like: svnsync: Cannot accept 'svn:log' property because it is not encoded in UTF-8 I can't modify the log property in the source repository so I need to somehow modify or ignore the property value when the encoding is unknown/invalid. Any ideas? For example, is it possible to write a pre-revprop-change script to modify the log property in transit?

Read the article

Git push works for gitosis but not my own repo (Permission denied)

- by Mickey Cheong

Hi, I follow this exact guide to setup my GIT server: http://blog.agdunn.net/?p=277 I tried it before and it works. However, this time, when I provision a new server, it doesn't. I followed the exact steps and I provision it 3 times. It still failed. I get this errors: Permission denied (publickey). fatal: The remote end hung up unexpectedly However, this only happen when I try to add a remote origin and push my new repo. If I do a git push on my gitosis, it works perfectly fine. I tried look into the IP and all the permission, I can't figure out what went wrong. Another test I did was, I went into .ssh/known_hosts/ and delete the IP entry. When I tried to do a git push for gitosis-admin, it will prompt if I wanted to allow this IP. However, this prompt doesn't appear for my new repo. Any help will be great appreciated. Thanks, Mickey

Read the article

Working with git from 2 laptops with no bare repo

- by matiit

I've started project in my first laptop. git init, and start working. Tomorrow i'm going to vacations. I want to take with me my smaller laptop. And work with project from time to time. I cloned repository via ssh from bigger laptop (git clone ssh://adress) And when i will back, what is the best way to push changes from smaller laptop to the bigger one? There is no bare repo in bigger laptop. And i want to work with that repo on the bigger laptop later, so i have to do this clear.

Read the article

What to add to git repo?

- by Ryan

I am doing a video player. I have the following in my project folder: these four dirs should each be on their own line: /source /sample_applications /images /videos Right now the repo just includes the /source directory...which is code only. It is on my local computer. I am thinking of adding it to git hub. My question is: should I add the sample apps, the images and the videos to the repo? Is that something that people normally do and that other people want people to do? Can git even handle videos(noob here)?

Read the article

Rebasing a core repo in git.

- by b. e. hollenbeck

I have a customized fork of CodeIgniter that I use as a standard baseline for several projects. Recently, I've made significant improvements in this repo that I want to use to update the client projects that use it. What I can't seem to figure out is how to pull in the changes to a client project. So I have: Baseline: A--B--C--D--E Client cloned @ C C'--D'--E' And I want to update the client repo to E from the Baseline project. I've tried rebase, and it has erased the files not present in the baseline project (views and such), and creates a bunch of conflicts that really don't need to be conflicts with things like the default HTML5 boilerplate that I use. Is there an option for rebase that I should be using? Is there a different way to approach it? Do I need a bunch of .gitignores for the content directories?

Read the article

$HOME git repo (selectively) to github?

- by user428502

I keep many files in my home directory under git. Important dotfiles, my thesis, etc. I want to push certain files to github, e.g., my emacs configuration, to share. Obviously, I don't want to push the entire repo. Are submodules the way to go? My first thought is to make a directory ~/github/emacs, and rsync selective files here, then add a submodule under that directory, pointing to github, to push. Is this a good idea, or is there a better way? (I don't want my local git repo storing all files to get muddled up with this stuff, though.)

Read the article

Subversion repo upgrade makes repository unusable.

- by Mike C.

Hi, I recently upgraded my subversion server from 1.4.6 to 1.6.11. The repos all seem to work correctly after this. I then try to upgrade a repo by issuing the svnadmin update command, and it produces no errors and says the update is complete. However, I am unable to open the repository after this. I get the following error when trying to open the repo: Could not open the requested SVN filesystem. I am using Apache, not SVNServe. Any help would be appreciated!

Read the article

JavaOne in Brazil

- by janice.heiss(at)oracle.com

JavaOne in Brazil, currently taking place in Sao Paolo, is one event I'd love to attend. I once heard "father of Java" James Gosling talk about Java developers throughout the world. He observed that there were good developers everywhere. It was not the case, he said, that that the really good developers are in one place and the not-so-good developers are in another. He encountered excellent developers everywhere. Then he paused and said that the craziest developers were definitely the Brazilians. As anyone who knows James would realize, this was meant as high praise. He said the Brazilians would work through the night on projects and were very enthusiastic and spontaneous - features that Brazilian culture is known for. Brazilian developers are responsible for creating one of the most impressive uses of Java ever - the applications that run the Brazilian health services. Starting from scratch they created a system that enables an expert doctor in Rio to look at an X-Ray of a patient near the Amazon and offer advice. One of the main architects of this was Java Champion Fabinane Nardon the distinguished Brazilian Java architect and open-source evangelist. As she writes in her blog:"In 2003, I was invited to assemble a team and architect a Public Healthcare Information System for the city of São Paulo, the largest in Latin America, with 14 million inhabitants. The resulting software had 2.5 million of lines of code and it was created, from specification to production, in only 10 months. At the time, the software was considered the largest J2EE application in the world and was featured in several articles, as this one. As a result, we won the Duke's Choice Award in 2005 during JavaOne, the largest development conference in the world. At the time, Sun Microsystems make a short documentary about our work." "In 2007, a lightning struck twice and I was again invited to assemble a new team and architect an even larger information system for healthcare. And thus I became CTO and one of the founders of Zilics Healthcare Information Systems. "In 2010, I started to research and work on Cloud Computing technology and became leader of the LSI-TEC Cloud Computing group. LSI-TEC is a research laboratory in the University of Sao Paulo, one of the best in Brazil. Thus, I became one of the ghost writers behind the popular Cloud Computing Twitter @the_cloud."You can see and hear Nardon in a 4 minute documentary on Java and the Brazilian health care system produced by Sun Microsystems. And you can listen to a September 2010 podcast with Nardon and her fellow Brazilian Java Champion Bruno Souza (known in Brazil as "Java Man") here at 11:10 minutes into the podcast.Next year, I'll hope to be reporting in Brazil at JavaOne!

Read the article

Split large repo into multiple subrepos and preserve history (Mercurial)

- by Andrew

We have a large base of code that contains several shared projects, solution files, etc in one directory in SVN. We're migrating to Mercurial. I would like to take this opportunity to reorganize our code into several repositories to make cloning for branching have less overhead. I've already successfully converted our repo from SVN to Mercurial while preserving history. My question: how do I break all the different projects into separate repositories while preserving their history? Here is an example of what our single repository (OurPlatform) currently looks like: /OurPlatform ---- Core ---- Core.Tests ---- Database ---- Database.Tests ---- CMS ---- CMS.Tests ---- Product1.Domain ---- Product1.Stresstester ---- Product1.Web ---- Product1.Web.Tests ---- Product2.Domain ---- Product2.Stresstester ---- Product2.Web ---- Product2.Web.Tests ==== Product1.sln ==== Product2.sln All of those are folders containing VS Projects except for the solution files. Product1.sln and Product2.sln both reference all of the other projects. Ideally, I'd like to take each of those folders, and turn them into separate Hg repos, and also add new repos for each project (they would act as parent repos). Then, If someone was going to work on Product1, they would clone the Product1 repo, which contained Product1.sln and subrepo references to ReferenceAssemblies, Core, Core.Tests, Database, Database.Tests, CMS, and CMS.Tests. So, it's easy to do this by just hg init'ing in the project directories. But can it be done while preserving history? Or is there a better way to arrange this?

Read the article

GIT clone repo across local file system

- by Jon

Hi all, I am a complete Noob when it comes to GIT. I have been just taking my first steps over the last few days. I setup a repo on my laptop, pulled down the Trunk from an SVN project (had some issues with branches, not got them working), but all seems ok there. I now want to be able to pull or push from the laptop to my main desktop. The reason being the laptop is handy on the train as I spend 2 hours a day travelling and can get some good work done. But my main machine at home is great for development. So I want to be able to push / pull from the laptop to the main computer when I get home. I thought the most simple way of doing this would be to just have the code folder shared out across the LAN and do: git clone file://192.168.10.51/code unfortunately this doesn't seem to be working for me: so I open a git bash cmd and type the above command, I am in C:\code (the shared folder for both machines) this is what I get back: Initialized empty Git repository in C:/code/code/.git/ fatal: 'C:/Program Files (x86)/Git/code' does not appear to be a git repository fatal: The remote end hung up unexpectedly How can I share the repository between the two machines in the most simple of ways. There will be other locations that will be official storage points and places where the other devs and CI server etc will pull from, this is just so that I can work on the same repo across two machines. Thanks

Search Results

Search found 3281 results on 132 pages for 'repo man'.

Page 6/132 | < Previous Page | 2 3 4 5 6 7 8 9 10 11 12 13 | Next Page >

- by acidzombie24

- by Dashman

- by mbac32768

- by ascobol

- by Boldewyn

- by NoCarrier

- by Luke Maurer

- by Luke Maurer

- by David Corley

- by Phenom

- by Kazuhiro.Yamaguchi

- by Ton

- by dan

- by Roni Yaniv

- by Marco

- by Hamish

- by Mickey Cheong

- by matiit

- by Ryan

- by b. e. hollenbeck

- by user428502

- by Mike C.

- by janice.heiss(at)oracle.com

- by Andrew

- by Jon

< Previous Page | 2 3 4 5 6 7 8 9 10 11 12 13 | Next Page >