Search Results

Search found 58197 results on 2328 pages for 'application state'.

Page 60/2328 | < Previous Page | 56 57 58 59 60 61 62 63 64 65 66 67  | Next Page >

• Again WPA Connection problem even after changed to latest version ..please help

  - by Renjith G

  I am using hostapd, wireless tools with madwifi for my wireless ap in my board. The WEP, WPA-PSK connections and communications between my board with linux and my desktop PC, Windows XP SP2 (with Olitec USB wireless) are fine. But when I configured the WPA type, the connection seems established but shows the status "TKIP - Key Absent" in the security dialog box. Anyone faced this problem? Am attaching the conf files and the connection status. In the AP side am complaining . I am using the in built radius server conf with the hostapd 0.4.7 hostapd.conf interface=ath0 driver=madwifi logger_syslog=0 logger_syslog_level=0 logger_stdout=0 logger_stdout_level=0 debug=0 eapol_key_index_workaround=1 dump_file=/tmp/hostapd.dump.0.0 ssid=Renjith G wpa wpa=1 wpa_passphrase=mypassphrase wpa_key_mgmt=WPA-EAP wpa_pairwise=TKIP CCMP wpa_group_rekey=600 macaddr_acl=2 /* commented */ ieee8021x=1 /* commented */ eap_authenticator=1 own_ip_addr=172.16.25.1 nas_identifier=renjithg.com auth_server_addr=172.16.25.1 auth_server_port=1812 auth_server_shared_secret=key1 ca_cert=/flash1/ca.crt server_cert=/flash1/server.crt eap_user_file=/etc/hostapd.eap_user hostapd.eap_user "*@renjithg.com" TLS And the commands am using are wlanconfig ath0 create wlandev wifi0 wlanmode ap iwconfig ath0 essid Renjith channel 6 ifconfig ath0 192.168.25.1 netmask 255.255.255.0 up hostapd -ddd /etc/hostapd.conf Please correct if am wrong .. Also am getting the debug messages on my AP when am connecting in my windows machine through WPA ~/wlanexe # ./hostapd -ddd /etc/hostapd.conf Configuration file: /etc/hostapd.conf Line 18: obsolete eap_authenticator used; this has been renamed to eap_server madwifi_set_iface_flags: dev_up=0 Using interface ath0 with hwaddr 00:0b:6b:33:8c:30 and ssid 'Renjith G wpa' madwifi_set_ieee8021x: enabled=1 madwifi_configure_wpa: group key cipher=1 madwifi_configure_wpa: pairwise key ciphers=0xa madwifi_configure_wpa: key management algorithms=0x1 madwifi_configure_wpa: rsn capabilities=0x0 madwifi_configure_wpa: enable WPA= 0x1 madwifi_set_iface_flags: dev_up=1 madwifi_set_privacy: enabled=1 WPA: group state machine entering state GTK_INIT GMK - hexdump(len=32): 9c 77 cd 38 5a 60 3b 16 8a 22 90 e8 65 b3 c2 86 40 5c be c3 dd 84 3e df 58 1d 16 61 1d 13 d1 f2 GTK - hexdump(len=32): 02 78 d7 d3 5d 15 e3 89 9c 62 a8 fe 8a 0f 40 28 ba dc cd bc 07 f4 59 88 1c 08 84 2b 49 3d e2 32 WPA: group state machine entering state SETKEYSDONE madwifi_set_key: alg=TKIP addr=00:00:00:00:00:00 key_idx=1 Flushing old station entries madwifi_sta_deauth: addr=ff:ff:ff:ff:ff:ff reason_code=3 Deauthenticate all stations l2_packet_receive - recvfrom: Network is down Wireless event: cmd=0x8c03 len=20 New STA WPA: 00:0a:78:a0:0b:09 WPA_PTK entering state INITIALIZE madwifi_del_key: addr=00:0a:78:a0:0b:09 key_idx=0 WPA: 00:0a:78:a0:0b:09 WPA_PTK_GROUP entering state IDLE WPA: 00:0a:78:a0:0b:09 WPA_PTK entering state AUTHENTICATION WPA: 00:0a:78:a0:0b:09 WPA_PTK entering state AUTHENTICATION2 IEEE 802.1X: 4 bytes from 00:0a:78:a0:0b:09 IEEE 802.1X: version=1 type=1 length=0 Wireless event: cmd=0x8c04 len=20 madwifi_del_key: addr=00:0a:78:a0:0b:09 key_idx=0 ioctl[unknown???]: Invalid argument WPA: 00:0a:78:a0:0b:09 WPA_PTK entering state DISCONNECTED WPA: 00:0a:78:a0:0b:09 WPA_PTK entering state INITIALIZE madwifi_del_key: addr=00:0a:78:a0:0b:09 key_idx=0 ioctl[unknown???]: Invalid argument Wireless event: cmd=0x8c03 len=20 New STA WPA: 00:0a:78:a0:0b:09 WPA_PTK entering state INITIALIZE madwifi_del_key: addr=00:0a:78:a0:0b:09 key_idx=0 WPA: 00:0a:78:a0:0b:09 WPA_PTK_GROUP entering state IDLE WPA: 00:0a:78:a0:0b:09 WPA_PTK entering state AUTHENTICATION WPA: 00:0a:78:a0:0b:09 WPA_PTK entering state AUTHENTICATION2 IEEE 802.1X: 4 bytes from 00:0a:78:a0:0b:09 IEEE 802.1X: version=1 type=1 length=0 < Register Fail < Register Fail Wireless event: cmd=0x8c04 len=20 madwifi_del_key: addr=00:0a:78:a0:0b:09 key_idx=0 ioctl[unknown???]: Invalid argument WPA: 00:0a:78:a0:0b:09 WPA_PTK entering state DISCONNECTED WPA: 00:0a:78:a0:0b:09 WPA_PTK entering state INITIALIZE madwifi_del_key: addr=00:0a:78:a0:0b:09 key_idx=0 ioctl[unknown???]: Invalid argument Wireless event: cmd=0x8c03 len=20 New STA WPA: 00:0a:78:a0:0b:09 WPA_PTK entering state INITIALIZE madwifi_del_key: addr=00:0a:78:a0:0b:09 key_idx=0 WPA: 00:0a:78:a0:0b:09 WPA_PTK_GROUP entering state IDLE WPA: 00:0a:78:a0:0b:09 WPA_PTK entering state AUTHENTICATION WPA: 00:0a:78:a0:0b:09 WPA_PTK entering state AUTHENTICATION2 IEEE 802.1X: 4 bytes from 00:0a:78:a0:0b:09 IEEE 802.1X: version=1 type=1 length=0 NOW am getting the following error message with latest tools. *This is the latest error messages..please refer this only..* ~/wlanexe # ./hostapd -ddd /etc/hostapd.conf TLS: Trusted root certificate(s) loaded madwifi_set_iface_flags: dev_up=0 madwifi_set_privacy: enabled=0 BSS count 1, BSSID mask ff:ff:ff:ff:ff:ff (0 bits) Flushing old station entries madwifi_sta_deauth: addr=ff:ff:ff:ff:ff:ff reason_code=3 ioctl[IEEE80211_IOCTL_SETMLME]: Invalid argument madwifi_sta_deauth: Failed to deauth STA (addr ff:ff:ff:ff:ff:ff reason 3) Could not connect to kernel driver. Deauthenticate all stations madwifi_sta_deauth: addr=ff:ff:ff:ff:ff:ff reason_code=2 ioctl[IEEE80211_IOCTL_SETMLME]: Invalid argument madwifi_sta_deauth: Failed to deauth STA (addr ff:ff:ff:ff:ff:ff reason 2) madwifi_set_privacy: enabled=0 madwifi_del_key: addr=00:00:00:00:00:00 key_idx=0 madwifi_del_key: addr=00:00:00:00:00:00 key_idx=1 madwifi_del_key: addr=00:00:00:00:00:00 key_idx=2 madwifi_del_key: addr=00:00:00:00:00:00 key_idx=3 Using interface ath0 with hwaddr 00:0b:6b:33:8c:30 and ssid 'RenjithGwpa' SSID - hexdump_ascii(len=11): 52 65 6e 6a 69 74 68 47 77 70 61 RenjithGwpa PSK (ASCII passphrase) - hexdump_ascii(len=12): 6d 79 70 61 73 73 70 68 72 61 73 65 mypassphrase PSK (from passphrase) - hexdump(len=32): a6 55 3e 76 94 8b d9 81 a1 22 5e 24 29 83 33 86 11 a8 7e 93 19 7c a9 ab ab cc 12 58 37 e5 35 b6 RADIUS local address: 172.16.25.1:1024 madwifi_set_ieee8021x: enabled=1 madwifi_configure_wpa: group key cipher=1 madwifi_configure_wpa: pairwise key ciphers=0xa madwifi_configure_wpa: key management algorithms=0x1 madwifi_configure_wpa: rsn capabilities=0x0 madwifi_configure_wpa: enable WPA=0x1 WPA: group state machine entering state GTK_INIT (VLAN-ID 0) GMK - hexdump(len=32): [REMOVED] GTK - hexdump(len=32): [REMOVED] WPA: group state machine entering state SETKEYSDONE (VLAN-ID 0) madwifi_set_key: alg=TKIP addr=00:00:00:00:00:00 key_idx=1 madwifi_set_privacy: enabled=1 madwifi_set_iface_flags: dev_up=1 ath0: Setup of interface done. l2_packet_receive - recvfrom: Network is down Wireless event: cmd=0x8b1a len=24 Wireless event: cmd=0x8c03 len=20 New STA ioctl[unknown???]: Invalid argument madwifi_process_wpa_ie: Failed to get WPA/RSN IE Failed to get WPA/RSN information element. Data frame from not associated STA 00:0a:78:a0:0b:09 Wireless event: cmd=0x8c04 len=20 Wireless event: cmd=0x8c03 len=20 New STA ioctl[unknown???]: Invalid argument madwifi_process_wpa_ie: Failed to get WPA/RSN IE Failed to get WPA/RSN information element. Data frame from not associated STA 00:0a:78:a0:0b:09 Data frame from not associated STA 00:0a:78:a0:0b:09 Data frame from not associated STA 00:0a:78:a0:0b:09 Wireless event: cmd=0x8c04 len=20 Wireless event: cmd=0x8c03 len=20 New STA ioctl[unknown???]: Invalid argument madwifi_process_wpa_ie: Failed to get WPA/RSN IE Failed to get WPA/RSN information element. Data frame from not associated STA 00:0a:78:a0:0b:09

  Read the article

• Easily recreate a server's "state" [closed]

  - by Brandon Wamboldt

  I want the ability to setup new servers for dev/testing/prod very easily. The reasons for being able to setup a new dev VM is obvious, but for prod my concern is adding a new production server/migrating to a new server. I assume a traditional backup solution won't work as hardware may be different so the binaries/config might be different. I want to get experience with puppet anyways, so I was thinking about creating a manifest that would setup my users, install Postgres, Nginx, PHP-FPM, etc, and configure them the way I specify. Then I could install puppet on a new server, copy down my manifest and apply it locally. This would make keeping my server configs in sync easier too. Is there a better approach I'm not aware of, and does my approach have any pitfalls?

  Read the article

• Application Event Log keeps getting corrupted

  - by yakatz

  I recently asked about repairing a corrupt event log, because it seemed to be a one-off event. The event log has since exhibited the same behavior 3 times. We have been trying to find patterns, but so far we have found nothing. The server runs several ASP.NET applications and three scheduled tasks written in .NET. The last modified date of the event log once happened to be the same time as one of the scheduled tasks, but the others have not been. Any suggestions of where to look next or a way we can get any information out of a corrupt evtx file? The server is running critical e-commerce applications, so we want to keep the number of restarts required to a minimum. Edit: I ran DUMPEL and got very strange results. 1/9/2012 4:14:05 PM 1 100 1000 Application Error N/A SERVERNAME Faulting application name: w3wp.exe, version: 7.5.7601.17514, time stamp: 0x4ce7a5f8 Faulting module name: ntdll.dll, version: 6.1.7601.17514, time stamp: 0x4ce7ba58 Exception code: 0xc0000374 Fault offset: 0x000ce653 Faulting process id: 0x1070 Faulting application start time: 0x01cccf1386d30991 Faulting application path: C:\Windows\SysWOW64\inetsrv\w3wp.exe Faulting module path: C:\Windows\SysWOW64\ntdll.dll Report Id: dbf4f691-3b06-11e1-9025-005056a602e6 1/9/2012 4:14:07 PM 4 0 1001 Windows Error Reporting N/A SERVERNAME Fault bucket , type 0 Event Name: APPCRASH Response: Not available Cab Id: 0 Problem signature: P1: w3wp.exe P2: 7.5.7601.17514 P3: 4ce7a5f8 P4: StackHash_79d9 P5: 6.1.7601.17514 P6: 4ce7ba58 P7: c0000374 P8: 000ce653 P9: P10: Attached files: C:\Windows\Temp\WER975.tmp.appcompat.txt C:\Windows\Temp\WERA03.tmp.WERInternalMetadata.xml C:\Windows\Temp\WERA13.tmp.hdmp C:\Windows\Temp\WERD21.tmp.mdmp These files may be available here: C:\ProgramData\Microsoft\Windows\WER\ReportQueue\AppCrash_w3wp.exe_cd7d09dfc84119d82a2ac6a789038bd5661acfb_cab_128f0e67 Analysis symbol: Rechecking for solution: 0 Report Id: dbf4f691-3b06-11e1-9025-005056a602e6 Report Status: 4 1/9/2012 4:14:07 PM 4 0 1001 Windows Error Reporting N/A SERVERNAME Fault bucket , type 0 Event Name: APPCRASH Response: Not available Cab Id: 0 Problem signature: P1: w3wp.exe P2: 7.5.7601.17514 P3: 4ce7a5f8 P4: StackHash_79d9 P5: 6.1.7601.17514 P6: 4ce7ba58 P7: c0000374 P8: 000ce653 P9: P10: Attached files: C:\Windows\Temp\WER975.tmp.appcompat.txt C:\Windows\Temp\WERA03.tmp.WERInternalMetadata.xml C:\Windows\Temp\WERA13.tmp.hdmp C:\Windows\Temp\WERD21.tmp.mdmp These files may be available here: C:\ProgramData\Microsoft\Windows\WER\ReportQueue\AppCrash_w3wp.exe_cd7d09dfc84119d82a2ac6a789038bd5661acfb_cab_128f0e67 Analysis symbol: Rechecking for solution: 0 Report Id: dbf4f691-3b06-11e1-9025-005056a602e6 Report Status: 0 1/9/2012 4:14:12 PM 1 100 1000 Application Error N/A SERVERNAME Faulting application name: w3wp.exe, version: 7.5.7601.17514, time stamp: 0x4ce7a5f8 Faulting module name: ntdll.dll, version: 6.1.7601.17514, time stamp: 0x4ce7ba58 Exception code: 0xc0000374 Fault offset: 0x000ce653 Faulting process id: 0x16ac Faulting application start time: 0x01cccf139f475c0c Faulting application path: C:\Windows\SysWOW64\inetsrv\w3wp.exe Faulting module path: C:\Windows\SysWOW64\ntdll.dll Report Id: e03bae70-3b06-11e1-9025-005056a602e6 1/9/2012 4:14:16 PM 4 0 1001 Windows Error Reporting N/A SERVERNAME Fault bucket , type 0 Event Name: APPCRASH Response: Not available Cab Id: 0 Problem signature: P1: w3wp.exe P2: 7.5.7601.17514 P3: 4ce7a5f8 P4: StackHash_9c6c P5: 6.1.7601.17514 P6: 4ce7ba58 P7: c0000374 P8: 000ce653 P9: P10: Attached files: C:\Windows\Temp\WER2579.tmp.appcompat.txt C:\Windows\Temp\WER25F7.tmp.WERInternalMetadata.xml C:\Windows\Temp\WER25F8.tmp.hdmp C:\Windows\Temp\WER28F6.tmp.mdmp These files may be available here: C:\ProgramData\Microsoft\Windows\WER\ReportQueue\AppCrash_w3wp.exe_c49a67649524ad11b64bbf809211bc5ba742a3d6_cab_0b63321b Analysis symbol: Rechecking for solution: 0 Report Id: e03bae70-3b06-11e1-9025-005056a602e6 Report Status: 4 1/9/2012 4:14:16 PM 4 0 1001 Windows Error Reporting N/A SERVERNAME Fault bucket , type 0 Event Name: APPCRASH Response: Not available Cab Id: 0 Problem signature: P1: w3wp.exe P2: 7.5.7601.17514 P3: 4ce7a5f8 P4: StackHash_9c6c P5: 6.1.7601.17514 P6: 4ce7ba58 P7: c0000374 P8: 000ce653 P9: P10: Attached files: C:\Windows\Temp\WER2579.tmp.appcompat.txt C:\Windows\Temp\WER25F7.tmp.WERInternalMetadata.xml C:\Windows\Temp\WER25F8.tmp.hdmp C:\Windows\Temp\WER28F6.tmp.mdmp These files may be available here: C:\ProgramData\Microsoft\Windows\WER\ReportQueue\AppCrash_w3wp.exe_c49a67649524ad11b64bbf809211bc5ba742a3d6_cab_0b63321b Analysis symbol: Rechecking for solution: 0 Report Id: e03bae70-3b06-11e1-9025-005056a602e6 Report Status: 0 1/9/2012 4:14:21 PM 1 100 1000 Application Error N/A SERVERNAME Faulting application name: w3wp.exe, version: 7.5.7601.17514, time stamp: 0x4ce7a5f8 Faulting module name: ntdll.dll, version: 6.1.7601.17514, time stamp: 0x4ce7ba58 Exception code: 0xc0000374 Fault offset: 0x000ce653 Faulting process id: 0x17f8 Faulting application start time: 0x01cccf13a4ba5126 Faulting application path: C:\Windows\SysWOW64\inetsrv\w3wp.exe Faulting module path: C:\Windows\SysWOW64\ntdll.dll Report Id: e57a0a85-3b06-11e1-9025-005056a602e6 1/9/2012 4:14:21 PM 4 0 1001 Windows Error Reporting N/A SERVERNAME Fault bucket , type 0 Event Name: APPCRASH Response: Not available Cab Id: 0 Problem signature: P1: w3wp.exe P2: 7.5.7601.17514 P3: 4ce7a5f8 P4: StackHash_9c6c P5: 6.1.7601.17514 P6: 4ce7ba58 P7: c0000374 P8: 000ce653 P9: P10: Attached files: These files may be available here: C:\ProgramData\Microsoft\Windows\WER\ReportQueue\AppCrash_w3wp.exe_c49a67649524ad11b64bbf809211bc5ba742a3d6_1cfb4872 Analysis symbol: Rechecking for solution: 0 Report Id: e57a0a85-3b06-11e1-9025-005056a602e6 Report Status: 4 1/9/2012 4:14:21 PM 4 0 1001 Windows Error Reporting N/A SERVERNAME Fault bucket , type 0 Event Name: APPCRASH Response: Not available Cab Id: 0 Problem signature: P1: w3wp.exe P2: 7.5.7601.17514 P3: 4ce7a5f8 P4: StackHash_9c6c P5: 6.1.7601.17514 P6: 4ce7ba58 P7: c0000374 P8: 000ce653 P9: P10: Attached files: These files may be available here: C:\ProgramData\Microsoft\Windows\WER\ReportQueue\AppCrash_w3wp.exe_c49a67649524ad11b64bbf809211bc5ba742a3d6_1cfb4872 Analysis symbol: Rechecking for solution: 0 Report Id: e57a0a85-3b06-11e1-9025-005056a602e6 Report Status: 0 None of the files referenced actually exist (not even in WER ReportArchive). These should not be the only events mentioned. The log file has been cleared twice since January 9, so those events should not even be listed at all.

  Read the article

• How to get Windows Server 2008 VM to use multiple cores

  - by David Fraser

  I have a Windows Server 2008 machine running in VirtualBox. On initial installation, only one processor was made available, but now I want to run it as a multiprocessor machine. I have made all four cores available in the VirtualBox settings (as well as enabling VT-x/AMD-V and Nested Paging), but Task Manager still only shows one CPU. However, the four CPU cores are visible in Device Manager under Processors. In the event log on startup, I can see the following relevant events: EventLog.6009 Microsoft (R) Windows (R) 6.00.6002 Service Pack 2 Multiprocessor Free Kernel-Processor-Power.4 Processor 0 exposes the following: 1 idle state(s), 0 performance state(s), 0 throttle state(s) Kernel-Processor-Power.4 Processor 255 exposes the following: 0 idle state(s), 0 performance state(s), 0 throttle state(s) Kernel-Processor-Power.4 Processor 255 exposes the following: 0 idle state(s), 0 performance state(s), 0 throttle state(s) Kernel-Processor-Power.4 Processor 255 exposes the following: 0 idle state(s), 0 performance state(s), 0 throttle state(s) How can I make this system actually boot up as a multiprocessor machine?

  Read the article

• How to get partition information from non-booting server?

  - by gravyface

  Need to manually rebuild a mirrored array on a server and am in the process of reinstalling SBS 2003 on it. However, it's a Dell server, and know that there's the Dell FAT32 diagnostics partition, a system partition, and a data partition, but do not know the size of each. Planning on reinstalling SBS 2003, all applications on the server, and then doing a System State restore, but figured that not having the correct partitions will cause some grief: am I right? Almost thinking that the size of the partitions shouldn't matter, but not positive. Question: should I care about the size of the partition? If so, how can I get this partition information from a non-booting drive? We have an Acronis image of the one working disk and the partitions are mounted/viewable in Explorer on a workstation, but I'm not sure where the Logical Disk Manager/Disk Management data is stored and/or if there's a way to retrieve it without having a working Windows installation.

  Read the article

• How to get Windows Server 2008 VM to use multiple cores

  - by David Fraser

  I have a Windows Server 2008 machine running in VirtualBox. On initial installation, only one processor was made available, but now I want to run it as a multiprocessor machine. I have made all four cores available in the VirtualBox settings (as well as enabling VT-x/AMD-V and Nested Paging), but Task Manager still only shows one CPU. However, the four CPU cores are visible in Device Manager under Processors. In the event log on startup, I can see the following relevant events: EventLog.6009 Microsoft (R) Windows (R) 6.00.6002 Service Pack 2 Multiprocessor Free Kernel-Processor-Power.4 Processor 0 exposes the following: 1 idle state(s), 0 performance state(s), 0 throttle state(s) Kernel-Processor-Power.4 Processor 255 exposes the following: 0 idle state(s), 0 performance state(s), 0 throttle state(s) Kernel-Processor-Power.4 Processor 255 exposes the following: 0 idle state(s), 0 performance state(s), 0 throttle state(s) Kernel-Processor-Power.4 Processor 255 exposes the following: 0 idle state(s), 0 performance state(s), 0 throttle state(s) How can I make this system actually boot up as a multiprocessor machine?

  Read the article

• Grub Error 18 - Solid State Drive

  - by clint

  I recently used Raw Copy to make an image of my 300gb Raptor Hd to a OCZ Vertex SSD 60GB. And When I pluged in the SSD to boot I get a Grub Error 18. I have tried to changed in the BIOS setting to LBA, Large, Auto, trying different combination's. Any advice. thanks, Clint

  Read the article

• WBAdmin SystemState Problems

  - by TheD

  I recently installed DHCP on my 2008R2 Server and now Backup Exec and WBAdmin/WSB is having System State issues. Essentially, after some research, I came across a handy tool called VSHADOW which has allowed me to output all the files (and their respective directories) to a text file. And hooray, I think I found the problem: * WRITER "Dhcp Jet Writer" - WriterId = {be9ac81e-3619-421f-920f-4c6fea9e93ad} - InstanceId = {0ed0a8f4-19b0-414d-a3a8-d51d6f4ac8e0} - Supports restore events = TRUE - Writer restore conditions = VSS_WRE_IF_REPLACE_FAILS - Restore method = VSS_RME_RESTORE_AT_REBOOT - Requires reboot after restore = TRUE - Excluded files: - Component "Dhcp Jet Writer:\C:_Windows_system32_dhcp\dhcp" - Name: 'dhcp' - Logical Path: 'C:_Windows_system32_dhcp' - Full Path: '\C:_Windows_system32_dhcp\dhcp' The logical path and Full Path for DHCP is completely wrong. However I can't find where I would change this path, I assume in the registry but I've had no luck finding the key !

  Read the article

• Currently well suited SATA2-SSDs for Laptop usage

  - by danilo

  I am looking for a solid state drive for my laptop. My dillemma: I have been waiting for the new Intel SSDs since Q3/2010, as I've heard they should be better and cheaper, due to lower memory manufacturing costs. Now it looks like the new Intel drives are very fast, but still expensive. I would still buy one of them if I could benefit from the full speed. My hardware only has a SATA-2 port though. Thus, my question: Is it worthwhile to buy one of those new Intel SSDs made for SATA-3 if I won't be able to use the full speed? Are there any other promising new SSDs that will be released soon? (Inside the next 1-2 months) If I wouldn't make a good deal buying the newer, faster drives, what drives can you recommend? I don't consider this question subjective, as I am mainly looking for answers concerning the SATA-2/SATA-3 conflict.

  Read the article

• Srvany Starts but Application doesn't

  - by mharran

  I used Instsrv and Srvany as to create a service on W2008; the Srvany service starts okay but the application does not start. The application is TeamSpeak 3 btw. I don't think it's an issue with my W2008 setup as I have a previous version of the application set up the exact same way and running perfectly. Also, I have no problem manually starting the application even when I copy and paste into the 'Run' box the path used for the application by Srvany. I looked at Events but nothing there except notification that the service has entered the running state, didn't really expect any errors as the service has started even though the application hasn't. Any suggestions on what could be the problem?

  Read the article

• NFS4 / ZFS: revert ACL to clean/inherited state

  - by Keiichi

  My problem is identical to this Windows question, but pertains NFS4 (Linux) and the underlying ZFS (OpenIndiana) we are using. We have this ZFS shared via NFS4 and CIFS for Linux and Windows users respectively. It would be nice for both user groups to benefit from ACLs, but the one missing puzzle piece goes thusly: Each user has a home, where he sets a top-level, inherited ACL. He can later on refine permissions for the contained files/folders iteratively. Over time, sometimes permissions need to be generalized again to avoid increasing pollution of ACL entries. You can tweak the ACL of every single file if need be to obtain the wanted permissions, but that defeats the purpose of inherited ACLs. So, how can an ACL be completely cleared like in the question linked above? I have found nothing about what a blank, inherited ACL should look like. This usecase simply does not seem to exist. In fact, the solaris chmod manpage clearly states A- Removes all ACEs for current ACL on file and replaces current ACL with new ACL that represents only the current mode of the file. I.e. we get three new ACL entries filled with stuff representing the permission bits, which is rather useless for cleaning up. If I try to manually remove every ACE, on the last one I get chmod A0- <file> chmod: ERROR: Can't remove all ACL entries from a file Which by the way makes me think: and why not? In fact, I really want the whole file-specific ACL gone. The same holds for linux, which enumerates ACEs starting with 1(!), and verbalizes its woes less diligently nfs4_setacl -x 1 <file> Failed setxattr operation: Unknown error 524 So, what is the idea behind ACLs under Solaris/NFS? Can they never be cleaned up? Why does the recursion option for the ACL setting commands pollute all children instead of setting a single ACL and making the children inherit? Is this really the intention of the designers? I can clean up the ACLs using a windows client perfectly well, but am I supposed to tell the linux users they have to switch OS just to consolidate permissions?

  Read the article

• Installing MFC (vs2005) application on Windows 2008 R2 64

  - by olich

  I've build an application that runs on Windows 2003, it is an old style MFC application. Today I need to install the application on a Windows 2008 R2 64 system. I have failures during installation and the application does not run. The application is build with VisualStudio2005, and uses COM objects. The MSI register the objects but it fails with the error code : HRESULT -2147010895. Any idea why the COM registration failed? I've tried to install the "Microsoft Visual C++ 2005 Redistributable Package (x86)" but it doesn't help. I've tried to register the COM objects with the regsvr32 after the installation but sadly it doesn't help. I've tries to install the application on Windows 2008 R2 32, and it works perfectly. I am quite new with 64 systems, so any help will be appreciated. tia olich

  Read the article

• Understanding connection tracking in iptables

  - by Matt

  I'm after some clarification of the state/connection tracking in iptables. What is the difference between these rules? iptables -A FORWARD -m state --state ESTABLISHED,RELATED -j ACCEPT iptables -A FORWARD -m conntrack --ctstate ESTABLISHED,RELATED -j ACCEPT Is connection tracking turned on when a packet is first matched containing -m state --state BLA , or is connection tracking always on? Can/Should connection state be used for fast matching like below? e.g. suppose this is some sort of router/firewall (no nat). # Default DROP policy iptables -P INPUT DROP iptables -P OUTPUT DROP iptables -P FORWARD DROP # Drop invalid iptables -A FORWARD -m state --state INVALID -j DROP # Accept established,related connections iptables -A FORWARD -m state --state ESTABLISHED,RELATED -j ACCEPT # Allow ssh through, track connection iptables -A FORWARD -p tcp --syn --dport 22 -m state --state NEW -j ACCEPT

  Read the article

• Postfix sasl: Relay access Denied (state 14)

  - by Primoz

  I have postfix installed with dovecot. There are no problems when I'm trying to send e-mails from my server, however all e-mails that are coming in are rejected. My main.cf file: queue_directory = /var/spool/postfix command_directory = /usr/sbin daemon_directory = /usr/libexec/postfix mail_owner = postfix inet_interfaces = all mydestination = localhost, $mydomain, /etc/postfix/domains/domains virtual_maps = hash:/etc/postfix/domains/addresses unknown_local_recipient_reject_code = 550 mynetworks = 127.0.0.0/8 alias_maps = hash:/etc/aliases alias_database = hash:/etc/aliases home_mailbox = Maildir/ debug_peer_level = 2 debugger_command = PATH=/bin:/usr/bin:/usr/local/bin:/usr/X11R6/bin xxgdb $daemon_directory/$process_name $process_id & sleep 5 sendmail_path = /usr/sbin/sendmail.postfix newaliases_path = /usr/bin/newaliases.postfix mailq_path = /usr/bin/mailq.postfix setgid_group = postdrop html_directory = no manpage_directory = /usr/share/man sample_directory = /usr/share/doc/postfix-2.3.3/samples readme_directory = /usr/share/doc/postfix-2.3.3/README_FILES smtpd_sasl_type = dovecot smtpd_sasl_path = private/auth smtpd_sasl_auth_enable = yes smtpd_recipient_restrictions = check_policy_service inet:127.0.0.1:9999, permit_mynetworks, permit_sasl_authenticated, reject_non_fqdn_recipient, reject_unknown_recipient_domain, reject_unauth_destination, smtpd_sender_restriction = reject_non_fqdn_sender broken_sasl_auth_clients = yes UPDATE: Now, when e-mail comes to the server, the server tries to reroute the mail. Example, if the message was sent to [email protected], my server changes that to [email protected] and then the mail bounces because there's no such domain on my server.

  Read the article

• Preserve the state of the start screen

  - by axrwkr

  What would I need to do in order to cause the start screen to stay the way it was the last time I saw it when I go back to it? I've noticed that every time I leave the start screen it resets back to the beginning, this means that I need to scroll back to where I was to get the same view. I don't want to change the order of the applications on the start screen to accommodate this, I would much prefer it if I could find a way to make the start screen stay the way it was so I can move on from there and also if there was a way to jump to the beginning or the end of the list that would be great. I imagine I can just use the search feature to find a specific program, but that's just an extra step, almost as bad as having to scroll.

  Read the article

• Windows 7 migration: How to move application settings?

  - by FrustratedWithFormsDesigner

  Migrating from WindowsXP Home to Windows 7 Pro. The last bit that I'm stuck on is migrating application settings, such as the settings for Opera, Firefox, MSN Messenger, and others. On the XP system, this all seems to be in "user/Local Settings" and "user/Application Data". On the Windos 7 system, there is a "user/AppData" folder as well as "user/Application Data" and "user/Local Settings". When I try to access "Application Data" and "Local Settings" on Windows 7, I get an "Access Denied" error (even though my user is an admin). So... if I can't copy my application settings files to "Application Data" and "Local Settings" on Windows 7, where to I copy them to?

  Read the article

• using one disk as cache for others

  - by HugoRune

  Hi Given a PC with several hard drives: Is it possible to use one fast disk as a giant file cache? I.e. automatically copying frequently accessed data to that one disk, and transparently redirecting reads and writes to that disk, so that other drives would only have be accessed occassionally. (writes would have to be forwarded to the other disks after a while of course) Advantages: the other drives could be powered down most of the time; reducing power, heat, noise speed of the other drives would not matter much. cache disk could be solid state. How can I set such a system up? What OS supports these options? Is this possible at all using Windows or Linux?

  Read the article

• SSD RAID 5 or 10?

  - by Kyle

  I have a few extra SSD drives (I know its rare but this has actually happened). I figured since I have almost 500 GB in SSD's I might as well replace all of my standard HDD's with them. I currently have a RAID 5 setup and enjoy the the speed and redundancy with 10k RPM drives. Should I bother to put my SSD's in RAID 5? I have not heard of anyone doing this and have no idea how it is going to work out. The loss of space doesn't really bother me since I have a 2 TB NAS with all my media on it. Does anyone have experience with putting solid state drives in a RAID 5. If RAID 5 is a bad idea has anyone had experience with a RAID 10? is it possible to stripe the SSD's and provide redundancy with standard HDD's?

  Read the article

• Multi-threaded .NET application blocks during file I/O when protected by Themida

  - by Erik Jensen

  As the title says I have a .NET application that is the GUI which uses multiple threads to perform separate file I/O and notice that the threads occasionally block when the application is protected by Themida. One thread is devoted to reading from serial COM port and another thread is devoted to copying files. What I experience is occasionally when the file copy thread encounters a network delay, it will block the other thread that is reading from the serial port. In addition to slow network (which can be transient), I can cause the problem to happen more frequently by making a PathFileExists call to a bad path e.g. PathFileExists("\\\\BadPath\\file.txt"); The COM port reading function will block during the call to ReadFile. This only happens when the application is protected by Themida. I have tried under WinXP, Win7, and Server 2012. In a streamlined test project, if I replace the .NET application with a MFC unmanaged application and still utilize the same threads I see no issue even when protected with Themida. I have contacted Oreans support and here is their response: The way that a .NET application is protected is very different from a native application. To protect a .NET application, we need to hook most of the file access APIs in order to "cheat" the .NET Framework that the application is protected. I guess that those special hooks (on CreateFile, ReadFile...) are delaying a bit the execution in your application and the problem appears. We did a test making those hooks as light as possible (with minimum code on them) but the problem still appeared in your application. The rest of software protectors that we tried (like Enigma, Molebox...) also use a similar hooking approach as it's the only way to make the .NET packed file to work. If those hooks are not present, the .NET Framework will abort execution as it will see that the original file was tampered (due to all Microsoft checks on .NET files) Those hooks are not present in a native application, that's why it should be working fine on your native application. Oreans support tried other software protectors such as Enigma Protector, Engima VirtualBox, and Molebox and all exhibit the exact same problem. What I have found as a work around is to separate out the file copy logic (where the file exists call is being made) to be performed in a completely separate process. I have experimented with converting the thread functions from unmanaged C++ to VB.NET equivalents (PathFileExists - System.IO.File.Exists and CreateFile/ReadFile - System.IO.Ports.SerialPort.Open/Read) and still see the same serial port read blocked when the file check or copy call is delayed. I have also tried setting the ReadFile to work asynchronously but that had no effect. I believe I am dealing with some low-level windows layer that no matter the language it exhibits a block on a shared resource -- and only when the application is executing under a single .NET process protected by Themida which evidently installs some hooks to allow .NET execution. At this time converting the entire application away from .NET is not an option. Nor is separating out the file copy logic to a separate task. I am wondering if anyone else has more knowledge of how a file operation can block another thread reading from a system port. I have included here example applications that show the problem: https://db.tt/cNMYfEIg - VB.NET https://db.tt/Y2lnTqw7 - MFC They are Visual Studio 2010 solutions. When running the themida protected exe, you can see when the FileThread counter pauses (executing the File.Exists call) while the ReadThread counter also pauses. When running non-protected visual studio output exe, the ReadThread counter does not pause which is how we expect it to function. Thanks!

  Read the article

• C# LINQ filtering with nested if statements

  - by Tim Sumrall

  I have a learning project where a data grid is filtered by 3 controls (a checkbox and 2 dropdowns) I'm about to wrap up and move on to another project as it works well but I don't like the complexity of nesting IF statements to capture all the possible combinations of the 3 filters and was wondering if there is a better way. For example: Something that would allow for more filters to be added easily rather than walking through all the nests and adding another level of madness. private void BuildQuery() { EntityQuery<MASTER_DOCKS> query = QDocksContext.GetMASTER_DOCKSQuery(); if (Tonnage.IsChecked.HasValue && Tonnage.IsChecked.Value) { if (null != FilterWaterWay.SelectedValue) { string WaterwaytoFilterBy = FilterWaterWay.SelectedValue.ToString(); if (!string.IsNullOrWhiteSpace(WaterwaytoFilterBy) && WaterwaytoFilterBy != "[Select WaterWay]") { if (null != FilterState.SelectedValue) { string StateToFilterBy = FilterState.SelectedValue.ToString(); if (null != FilterState.SelectedValue && !string.IsNullOrWhiteSpace(StateToFilterBy) && StateToFilterBy != "[Select State]") { if (!string.IsNullOrWhiteSpace(StateToFilterBy) && StateToFilterBy != "[Select State]") { query = query.Where(s => s.WTWY_NAME == WaterwaytoFilterBy && s.STATE == StateToFilterBy && (s.Tons != "0" && s.Tons != "")).OrderBy(s => s.WTWY_NAME); MyQuery.Text = "Tonnage, WW and State"; } } if (StateToFilterBy == "[Select State]") //waterway but no state { query = query.Where(s => s.WTWY_NAME == WaterwaytoFilterBy && (s.Tons != "0" && s.Tons != "")).OrderBy(s => s.WTWY_NAME); MyQuery.Text = "Tonnage, WW No State"; } } } else { if (null != FilterState.SelectedValue) { string StateToFilterBy = FilterState.SelectedValue.ToString(); if (null != FilterState.SelectedValue && !string.IsNullOrWhiteSpace(StateToFilterBy) && StateToFilterBy != "[Select State]") { if (!string.IsNullOrWhiteSpace(StateToFilterBy) && StateToFilterBy != "[Select State]") { query = query.Where(s => s.STATE == StateToFilterBy && (s.Tons != "0" && s.Tons != "")).OrderBy(s => s.WTWY_NAME); MyQuery.Text = "Tonnage State No WW"; } } else { query = query.Where(s => (s.Tons != "0" && s.Tons != "")); MyQuery.Text = "Tonnage No State No WW"; } } } } } else //no tonnage { if (null != FilterWaterWay.SelectedValue) { string WaterwaytoFilterBy = FilterWaterWay.SelectedValue.ToString(); if (!string.IsNullOrWhiteSpace(WaterwaytoFilterBy) && WaterwaytoFilterBy != "[Select WaterWay]") { if (null != FilterState.SelectedValue) { string StateToFilterBy = FilterState.SelectedValue.ToString(); if (null != FilterState.SelectedValue && !string.IsNullOrWhiteSpace(StateToFilterBy) && StateToFilterBy != "[Select State]") { if (!string.IsNullOrWhiteSpace(StateToFilterBy) && StateToFilterBy != "[Select State]") { query = query.Where(s => s.WTWY_NAME == WaterwaytoFilterBy && s.STATE == StateToFilterBy).OrderBy(s => s.WTWY_NAME); MyQuery.Text = "No Tonnage, WW and State"; } } if (StateToFilterBy == "[Select State]") //waterway but no state { query = query.Where(s => s.WTWY_NAME == WaterwaytoFilterBy).OrderBy(s => s.WTWY_NAME); MyQuery.Text = "No Tonnage, WW No State"; } } } else { if (null != FilterState.SelectedValue) { string StateToFilterBy = FilterState.SelectedValue.ToString(); if (null != FilterState.SelectedValue && !string.IsNullOrWhiteSpace(StateToFilterBy) && StateToFilterBy != "[Select State]") { if (!string.IsNullOrWhiteSpace(StateToFilterBy) && StateToFilterBy != "[Select State]") { query = query.Where(s => s.STATE == StateToFilterBy).OrderBy(s => s.WTWY_NAME); MyQuery.Text = "No Tonnage State No WW"; } } else { LoadAllData(); MyQuery.Text = "No Tonnage No State No WW"; } } } } } LoadOperation<MASTER_DOCKS> loadOp = this.QDocksContext.Load(query); DocksGrid.ItemsSource = loadOp.Entities; }

  Read the article

• Question about API and Web application code sharing

  - by opendd

  This is a design question. I have a multi part application with several user types. There is a user client for the patient that interacts with a web service. There is an API evolving behind the web service that will be exposed to institutional "users" and an interface for clinicians, researchers and admin types. The patient UI is Flex. The clinician/admin portion of the application is RoR. The API is RoR/rack based. The web service component is Java WS. All components access the same data source. These components are deployed as separate components to their own subdomains. This decision was made to allow for scaling the components individually as needed. Initially, the decision was made to split the code for the RoR Web application from the RoR API. This decision was made in the interests of security and keeping the components focused on specific tasks. Over the course of time, there is necessarily going to be overlap and I am second guessing my decision to keep the code totally separate. I am noticing code being lifted from the admin side being lifted, modified and used in the API. This being the case, I have been considering merging the Ruby based repositories. I am interested in ideas and insight on this situation along with the reasoning behind your thoughts. Thanks.

  Read the article

• Software Architecture: Quality Attributes

  Quality is what all software engineers should strive for when building a new system or adding new functionality. Dictonary.com ambiguously defines quality as a grade of excellence. Unfortunately, quality must be defined within the context of a situation in that each engineer must extract quality attributes from a project’s requirements. Because quality is defined by project requirements the meaning of quality is constantly changing base on the project. Software architecture factors that indicate the relevance and effectiveness The relevance and effectiveness of architecture can vary based on the context in which it was conceived and the quality attributes that are required to meet. Typically when evaluating architecture for a specific system regarding relevance and effectiveness the following questions should be asked.   Architectural relevance and effectiveness questions: Does the architectural concept meet the needs of the system for which it was designed? Out of the competing architectures for a system, which one is the most suitable? If we look at the first question regarding meeting the needs of a system for which it was designed. A system that answers yes to this question must meet all of its quality goals. This means that it consistently meets or exceeds performance goals for the system. In addition, the system meets all the other required system attributers based on the systems requirements. The suitability of a system is based on several factors. In order for a project to be suitable the necessary resources must be available to complete the task. Standard Project Resources: Money Trained Staff Time Life cycle factors that affect the system and design The development life cycle used on a project can drastically affect how a system’s architecture is created as well as influence its design. In the case of using the software development life cycle (SDLC) each phase must be completed before the next can begin.  This waterfall approach does not allow for changes in a system’s architecture after that phase is completed. This can lead to major system issues when the architecture for the system is not as optimal because of missed quality attributes. This can occur when a project has poor requirements and makes misguided architectural decisions to name a few examples. Once the architectural phase is complete the concepts established in this phase must move on to the design phase that is bound to use the concepts and guidelines defined in the previous phase regardless of any missing quality attributes needed for the project. If any issues arise during this phase regarding the selected architectural concepts they cannot be corrected during the current project. This directly has an effect on the design of a system because the proper qualities required for the project where not used when the architectural concepts were approved. When this is identified nothing can be done to fix the architectural issues and system design must use the existing architectural concepts regardless of its missing quality properties because the architectural concepts for the project cannot be altered. The decisions made in the design phase then preceded to fall down to the implementation phase where the actual system is coded based on the approved architectural concepts established in the architecture phase regardless of its architectural quality. Conversely projects using more of an iterative or agile methodology to implement a system has more flexibility to correct architectural decisions based on missing quality attributes. This is due to each phase of the SDLC is executed more than once so any issues identified in architecture of a system can be corrected in the next architectural phase. Subsequently the corresponding changes will then be adjusted in the following design phase so that when the project is completed the optimal architectural and design decision are applied to the solution. Architecture factors that indicate functional suitability Systems that have function shortcomings do not have the proper functionality based on the project’s driving quality attributes. What this means in English is that the system does not live up to what is required of it by the stakeholders as identified by the missing quality attributes and requirements. One way to prevent functional shortcomings is to test the project’s architecture, design, and implementation against the project’s driving quality attributes to ensure that none of the attributes were missed in any of the phases. Another way to ensure a system has functional suitability is to certify that all its requirements are fully articulated so that there is no chance for misconceptions or misinterpretations by all stakeholders. This will help prevent any issues regarding interpreting the system requirements during the initial architectural concept phase, design phase and implementation phase. Consider the applicability of other architectural models When considering an architectural model for a project is also important to consider other alternative architectural models to ensure that the model that is selected will meet the systems required functionality and high quality attributes. Recently I can remember talking about a project that I was working on and a coworker suggested a different architectural approach that I had never considered. This new model will allow for the same functionally that is offered by the existing model but will allow for a higher quality project because it fulfills more quality attributes. It is always important to seek alternatives prior to committing to an architectural model. Factors used to identify high-risk components A high risk component can be defined as a component that fulfills 2 or more quality attributes for a system. An example of this can be seen in a web application that utilizes a remote database. One high-risk component in this system is the TCIP component because it allows for HTTP connections to handle by a web server and as well as allows for the server to also connect to a remote database server so that it can import data into the system. This component allows for the assurance of data quality attribute and the accessibility quality attribute because the system is available on the network. If for some reason the TCIP component was to fail the web application would fail on two quality attributes accessibility and data assurance in that the web site is not accessible and data cannot be update as needed. Summary As stated previously, quality is what all software engineers should strive for when building a new system or adding new functionality. The quality of a system can be directly determined by how closely it is implemented when compared to its desired quality attributes. One way to insure a higher quality system is to enforce that all project requirements are fully articulated so that no assumptions or misunderstandings can be made by any of the stakeholders. By doing this a system has a better chance of becoming a high quality system based on its quality attributes

  Read the article

• Native packaging for JavaFX

  - by igor

  JavaFX 2.2 adds new packaging option for JavaFX applications, allowing you to package your application as a "native bundle". This gives your users a way to install and run your application without any external dependencies on a system JRE or FX SDK. I'd like to give you an overview of what is it, motivation behind it, and finally explain how to get started with it. Screenshots may give you some idea of user experience but first hand experience is always the best. Before we go into all of the boring details, here are few different flavors of Ensemble for you to try: exe, msi, dmg, rpm installers and zip of linux bundle for non-rpm aware systems. Alternatively, check out native packages for JFXtras 2. Whats wrong with existing deployment options? JavaFX 2 applications are easy to distribute as a standalone application or as an application deployed on the web (embedded in the web page or as link to launch application from the webpage). JavaFX packaging tools, such as ant tasks and javafxpackager utility, simplify the creation of deployment packages even further. Why add new deployment options? JavaFX applications have implicit dependency on the availability of Java and JavaFX runtimes, and while existing deployment methods provide a means to validate the system requirements are met -- and even guide user to perform required installation/upgrades -- they do not fully address all of the important scenarios. In particular, here are few examples: the user may not have admin permissions to install new system software if the application was certified to run in the specific environment (fixed version of Java and JavaFX) then it may be hard to ensure user has this environment due to an autoupdate of the system version of Java/JavaFX (to ensure they are secure). Potentially, other apps may have a requirement for a different JRE or FX version that your app is incompatible with. your distribution channel may disallow dependencies on external frameworks (e.g. Mac AppStore) What is a "native package" for JavaFX application? In short it is  A Wrapper for your JavaFX application that makes is into a platform-specific application bundle Each Bundle is self-contained and includes your application code and resources (same set as need to launch standalone application from jar) Java and JavaFX runtimes (private copies to be used by this application only) native application launcher  metadata (icons, etc.) No separate installation is needed for Java and JavaFX runtimes Can be distributed as .zip or packaged as platform-specific installer No application changes, the same jar app binaries can be deployed as a native bundle, double-clickable jar, applet, or web start app What is good about it: Easy deployment of your application on fresh systems, without admin permissions when using .zip or a user-level installer No-hassle compatibility.  Your application is using a private copy of Java and JavaFX. The developer (you!) controls when these are updated. Easily package your application for Mac AppStore (or Windows, or...) Process name of running application is named after your application (and not just java.exe)  Easily deploy your application using enterprise deployment tools (e.g. deploy as MSI) Support is built in into JDK 7u6 (that includes JavaFX 2.2) Is it a silver bullet for the deployment that other deployment options will be deprecated? No.  There are no plans to deprecate other deployment options supported by JavaFX, each approach addresses different needs. Deciding whether native packaging is a best way to deploy your application depends on your requirements. A few caveats to consider: "Download and run" user experienceUnlike web deployment, the user experience is not about "launch app from web". It is more of "download, install and run" process, and the user may need to go through additional steps to get application launched - e.g. accepting a browser security dialog or finding and launching the application installer from "downloads" folder. Larger download sizeIn general size of bundled application will be noticeably higher than size of unbundled app as a private copy of the JRE and JavaFX are included.  We're working to reduce the size through compression and customizable "trimming", but it will always be substantially larger than than an app that depends on a "system JRE". Bundle per target platformBundle formats are platform specific. Currently a native bundle can only be produced for the same system you are building on.  That is, if you want to deliver native app bundles on Windows, Linux and Mac you will have to build your project on all three platforms. Application updates are the responsibility of developerWeb deployed Java applications automatically download application updates from the web as soon as they are available. The Java Autoupdate mechanism takes care of updating the Java and JavaFX runtimes to latest secure version several times every year. There is no built in support for this in for bundled applications. It is possible to use 3rd party libraries (like Sparkle on Mac) to add autoupdate support at application level.  In a future version of JavaFX we may include built-in support for autoupdate (add yourself as watcher for RT-22211 if you are interested in this) Getting started with native bundles First, you need to get the latest JDK 7u6 beta build (build 14 or later is recommended). On Windows/Mac/Linux it comes with JavaFX 2.2 SDK as part of JDK installation and contains JavaFX packaging tools, including: bin/javafxpackagerCommand line utility to produce JavaFX packages. lib/ant-javafx.jar Set of ant tasks to produce JavaFX packages (most recommended way to deploy apps) For general information on how to use them refer to the Deploying JavaFX Application guide. Once you know how use these tools to package your JavaFX application for other deployment methods there are only a few minor tweaks necessary to produce native bundles: make sure java is used from JDK7u6 bundle you have installed adjust your PATH settings if needed  if you are using ant tasks add "nativeBundles=all" attribute to fx:deploy task if you are using javafxpackager pass "-native" option to deploy command or if you are using makeall command then it will try build native packages by default result bundles will be in the "bundles" folder next to other deployment artifacts Note that building some types of native packages (e.g. .exe or .msi) may require additional free 3rd party software to be installed and available on PATH. As of JDK 7u6 build 14 you could build following types of packages: Windows bundle image EXE Inno Setup 5 or later is required Result exe will perform user level installation (no admin permissions are required) At least one shortcut will be created (menu or desktop) Application will be launched at the end of install MSI WiX 3.0 or later is required Result MSI will perform user level installation (no admin permissions are required) At least one shortcut will be created (menu or desktop)  MacOS bundle image dmg (drag and drop) installer Linux bundle image rpm rpmbuild is required shortcut will be added to the programs menu If you are using Netbeans for producing the deployment packages then you will need to add custom build step to the build.xml to execute the fx:deploy task with native bundles enabled. Here is what we do for BrickBreaker sample: <target name="-post-jfx-deploy"> <fx:deploy width="${javafx.run.width}" height="${javafx.run.height}" nativeBundles="all" outdir="${basedir}/${dist.dir}" outfile="${application.title}"> <fx:application name="${application.title}" mainClass="${javafx.main.class}"> <fx:resources> <fx:fileset dir="${basedir}/${dist.dir}" includes="BrickBreaker.jar"/> </fx:resources> <info title="${application.title}" vendor="${application.vendor}"/> </fx:application> </fx:deploy> </target> This is pretty much regular use of fx:deploy task, the only special thing here is nativeBundles="all". Perhaps the easiest way to try building native bundles is to download the latest JavaFX samples bundle and build Ensemble, BrickBreaker or SwingInterop. Please give it a try and share your experience. We need your feedback! BTW, do not hesitate to file bugs and feature requests to JavaFX bug database! Wait! How can i ... This entry is not a comprehensive guide into native bundles, and we plan to post on this topic more. However, I am sure that once you play with native bundles you will have a lot of questions. We may not have all the answers, but please do not hesitate to ask! Knowing all of the questions is the first step to finding all of the answers.

  Read the article

• Static objects and concurrency in a web application

  - by Ionut

  I'm developing small Java Web Applications on Tomcat server and I'm using MySQL as my database. Up until now I was using a connection singleton for accessing the database but I found out that this will ensure just on connection per Application and there will be problems if multiple users want to access the database in the same time. (They all have to make us of that single Connection object). I created a Connection Pool and I hope that this is the correct way of doing things. Furthermore it seems that I developed the bad habit of creating a lot of static object and static methods (mainly because I was under the wrong impression that every static object will be duplicated for every client which accesses my application). Because of this all the Service Classes ( classes used to handle database data) are static and distributed through a ServiceFactory: public class ServiceFactory { private static final String JDBC = "JDBC"; private static String impl; private static AccountService accountService; private static BoardService boardService; public static AccountService getAccountService(){ initConfig(); if (accountService == null){ if (impl.equalsIgnoreCase(JDBC)){ accountService = new JDBCAccountService(); } } return accountService; } public static BoardService getBoardService(){ initConfig(); if (boardService == null){ if (impl.equalsIgnoreCase(JDBC)){ boardService = new JDBCBoardService(); } } return boardService; } private static void initConfig(){ if (StringUtil.isEmpty(impl)){ impl = ConfigUtil.getProperty("service.implementation"); // If the config failed initialize with standard if (StringUtil.isEmpty(impl)){ impl = JDBC; } } } This was the factory class which, as you can see, allows just one Service to exist at any time. Now, is this a bad practice? What happens if let's say 1k users access AccountService simultaneously? I know that all this questions and bad practices come from a bad understanding of the static attribute in a web application and the way the server handles this attributes. Any help on this topic would be more than welcomed. Thank you for your time!

  Read the article

• Oracle Utilities Application Framework V4.1 Group Fix 4 available

  - by ACShorten

  Oracle Utilities Application Framework V4.1 Group Fix 4 is available from My Oracle Support as Patch 13523301. This Group Fix contains a number of enhancements and keeps fixes up to date to the latest patch level. The enhancements included in this Group Fix include: UI Hints - In previous group fixes of the Oracle Utilities Application Framework the infrastructure to support UI Hints was introduced. This group fix completes the release of this functionality. Prior to this enhancement, products and implementers typically would build at least one UI Map per Business Object to display and/or maintain the object. Whilst, this can be generated using the UI Map maintenance function and stored, this enhancement allows additional tags and elements to be added to the Business Object directly to allow dynamic generation of the UI Map for maintenance and viewing the object. This reduces the need to generate and build a UI Map at all for that object. This will reduce maintenance effort of maintaining the product and implementation by eliminating the need to maintain the HTML for the UI Map. This also allows lower skilled personnel to maintain the system. Help and working examples are available from the View schema attributes and node names option from the Schema Tips dashboard zone. For example: Note: For examples of the hints, refer to an of the following Business Objects F1_OutcomeStyleLookup, F1-TodoSumEmailType, F1-BOStatusReason or F1-BIGeneralMasterConfig. Setting batch log file names -  By default the batch infrastructure supplied with the Oracle Utilities Application Framework sets the name and location of the log files to set values. In Group Fix 4 a set of user exits have been added to allow implementers and partners to set their own filename and location.  Refer to the Release Notes in the download for more details.

  Read the article

< Previous Page | 56 57 58 59 60 61 62 63 64 65 66 67  | Next Page >