Search Results

Search found 5371 results on 215 pages for 'church encoding'.

Page 60/215 | < Previous Page | 56 57 58 59 60 61 62 63 64 65 66 67  | Next Page >

• Incremental backups in Quickbooks 2005

  - by Nathan DeWitt

  My church uses Quickbooks 2005. They have a backup to a 512 MB thumbdrive. They have been backing up about every week for the past 18 months. The filesize of the backups have grown from 14 MB to about 23 MB. I was planning on giving them a 1 or 2 GB thumb drive and calling it a day, but when I dumped this info into Excel and projected out the growth rate, I found that we'll hit 1 GB in July, and 10 GB in about another 18 months, and then 100 GB about 18 months after that. It looks to me like Quickbooks saves all the transactions with every backup. Is there a way to force incremental backups? If this is the way it is, that's fine, but I'd rather not keep buying another order of magnitude of storage space every 18 months. Can I safely delete the previous backups, and just keep the recent 2 or 3 months worth? Thanks.

  Read the article

• Adding a single 300Gb SCSI drive to poweredge 2850

  - by John Steele

  I have a 2850 setup with 3 146Gb drives, two partitions 1 12GB system with server 2003 sp2 and 1 261Gb Data. I am strapped on disk space on the data partition having to push data around. I wanted to add a 300Gb single drive for lesser critical data, is this possible? Or is it best to add 2 300Gb drives for another RAID 1 configuration? This is my church network and while it is mission critical it is not enterprise so I can take it down for a few hours. Any pointers to documentation or direct help would be greatly appreciated. John

  Read the article

• Google Account Changes that Messed Up My Ability to Manage Sites

  - by A Yearwood

  I hope you can help... I have a google account that I use to manage my church website. This account is set up with my work email address. My work (a school system) is in the process of changing us all over to use google accounts to replace Outlook. When I logged in to this new account (which is my same email address) it no longer lets me manage my google site. Under my dashboard I can see that my data is still there, but when I try to "manage" my site it says I don't have one and re-directs me to my school's account. Thanks in advance. A Yearwood

  Read the article

• PCs with Wired Connection Keep Losing Internet Connectivity

  - by user717452

  I have a U-verse ATT DSL Internet at our church building. Recently, any computer that is plugged into the network via Ethernet keeps losing its internet connectivity. The setup is from the Modem to a Netgear Wireless Router, and from the router to 3 different computers. None of the laptops that use Wifi ever lose internet, just the wired ones, and I end up having to do ipconfig /release and /renew every day to get it back. One computer has Windows 7 and one has Windows XP. Any ideas as to what is going on with our network?

  Read the article

• PHP Mail Not Sending Messages

  - by Kenton de Jong

  I realize this question title is pretty overused, but I couldn't find an answer to my problem. This could be because either I'm not too good with PHP and I don't understand the problem, or because I have a different issue, but I thought I would post it and see if somebody can help me. I developed a website for a local church in my city and I made the site on my computer, put it onto my website as a sub directory and tested it all. It worked great. One of the things the client wanted was there to be an email form that can send emails. I made it and all was good. I then uploaded it onto the church server and thought it went good too. But then we decided to try the email form out, and for some reason it didn't work. I made the email form by having the user select a recipient (pastor, office manager, etc.) with a radio button, and that would change the action of the email form. I just did something like this: if (recipent == "pastor") { document.forms[0].action = "../scripts/php/pastor_contact.php"; } else if (recipent == "pastoralAssist") { document.forms[0].action = "../scripts/php/pastoral_assist_contact.php"; } else if (recipent == "famMinistry") { document.forms[0].action = "../scripts/php/sacra_assist_contact.php"; } else if (recipent == "sacraAssist") { document.forms[0].action = "../scripts/php/fam_ministry_contact.php"; } I know this isn't the cleanest, but it works great. The php files then, all look very similar to this (just a different email)" <?php $name = $_POST['name']; $email = $_POST['email']; $phone = $_POST['phone']; $message = $_POST['message']; $formcontent="From: $name \n Email: $email \n Phone Number: $phone \n Message: $message"; $recipient = "[email protected]"; $subject = $_POST['subject']; $mailheader = "$subject \r\n"; mail($recipient, $subject, $formcontent, $mailheader) or die("There seems to be an error with this form. Sorry about the inconveince. We are working to get this fixed."); header('Location: ../../quickylinks/message_sent.html') ; ?> What this does, briefly, is collect the information from the email form, submit it as an email and then redirect the user to a "Message Sent" page. This works on my server, but not theirs so I believe it's something to do with their server. You can see their server information here and mine here. When the user sends the message, they get "There seems to be an error with this form. Sorry about the inconveince. We are working to get this fixed." and the email doesn't go through, although the code is the same on my server and it works fine there. My initial thought was that PHP wasn't installed on their server (rare, but it does happen). But it was. So then I thought maybe it was installed, but the "mail" function was disabled. So I tried the following php code: <?php if (function_exists('mail')) { echo 'mail() is available'; } else { echo 'mail() has been disabled'; } ?> And it came back with "mail() is available". So now I'm stuck and I don't know the problem could be. As I said, I'm not very good at PHP yet so if somebody could give a detailed answer, I would be really really thankful! Thank you so much!

  Read the article

• Computer Science Degrees and Real-World Experience

  - by Steven Elliott Jr

  Recently, at a family reunion-type event I was asked by a high school student how important it is to get a computer science degree in order to get a job as a programmer in lieu of actual programming experience. The kid has been working with Python and the Blender project as he's into making games and the like; it sounds like he has some decent programming chops. Now, as someone that has gone through a computer science degree my initial response to this question is to say, "You absolutely MUST get a computer science degree in order to get a job as a programmer!" However, as I thought about this I was unsure as to whether my initial reaction was due in part to my own suffering as a CS student or because I feel that this is actually the case. Now, for me, I can say that I rarely use anything that I learned in college, in terms of the extremely hard math, algorithms, etc, etc. but I did come away with a decent attitude and the willingness to work through tough problems. I just don't know what to tell this kid; I feel like I should tell him to do the CS degree but I have hired so many programmers that majored in things like English, Philosophy, and other liberal arts-type degrees, even some that never went to college. In fact my best developer, falls into this latter category. He got started writing software for his church or something and then it took off into a passion. So, while I know this is one of those juicy potential down vote questions, I am just curious as to what everyone else thinks about this topic. Would you tell a high school kid about this? Perhaps if he/she already knows a good deal of programming and loves it he doesn't need a CS degree and could expand his horizons with a liberal arts degree. I know one of the creators of the Django web framework was a American Literature major and he is obviously a pretty gifted developer. Anyway, thanks for the consideration.

  Read the article

• Reflecting on 2010 and Looking into 2011

  - by Sam Abraham

  In early 2010, I had blogged and shared my excitement as I was about to embark on a new journey relocating to South Florida.     As I settled down and adjusted to my new life, I was presented with an opportunity to get actively involved and volunteer in the local Florida .Net and Project Management communities.  I have since devoted a significant portion of my time to community initiatives, coordinating the West Palm Beach .Net User Group, volunteering as a member of the INETA Speaker’s Bureau and traveling to attend/speak at .Net code camps and user groups throughout the states of Florida and New York. I have also taken on various volunteer roles at the South Florida Chapter of the Project Management Institute starting as core team member on the chapter’s mentoring initiative and ending the year as Project Manager of the chapter’s mentoring program and as Director of Electronic Communications on the chapter’s IT team. I am also serving a one year term (2010-2011) as secretary and founding board member of Florida’s first official chapter of the International Association for Software Architects (IASA).   A big thank you is due for those who afforded me the opportunity and privilege to take part of these initiatives and those who provided guidance and encouragement when I needed them the most.   Looking ahead into 2011, I hope to continue my community involvement and volunteer activities. I will start by dedicating the first 5 weekends in the New Year to teach a free comprehensive Microsoft PowerPoint class at church. My goal will be to start from scratch and slowly cover the various available PowerPoint features that can be leveraged to create captivating presentations. Starting February, I will be resuming my user group/code camp speaking engagements at our South Florida .Net Code Camp and the West Palm Beach .Net User Group.   I look forward to continuing to meet, chat and share with our technical community members and to another active year in community service.   All the best, --Sam Abraham

  Read the article

• What triggered the popularity of lambda functions in modern mainstream programming languages?

  - by Giorgio

  In the last few years anonymous functions (AKA lambda functions) have become a very popular language construct and almost every major / mainstream programming language has introduced them or is planned to introduce them in an upcoming revision of the standard. Yet, anonymous functions are a very old and very well-known concept in Mathematics and Computer Science (invented by the mathematician Alonzo Church around 1936, and used by the Lisp programming language since 1958, see e.g. here). So why didn't today's mainstream programming languages (many of which originated 15 to 20 years ago) support lambda functions from the very beginning and only introduced them later? And what triggered the massive adoption of anonymous functions in the last few years? Is there some specific event, new requirement or programming technique that started this phenomenon? IMPORTANT NOTE The focus of this question is the introduction of anonymous functions in modern, main-stream (and therefore, maybe with a few exceptions, non functional) languages. Also, note that anonymous functions (blocks) are present in Smalltalk, which is not a functional language, and that normal named functions have been present even in procedural languages like C and Pascal for a long time. Please do not overgeneralize your answers by speaking about "the adoption of the functional paradigm and its benefits", because this is not the topic of the question.

  Read the article

• Good podcasting solution?

  - by burnso

  I simply ask for the best, most common and simple way to set up a podcast? Please, I need an answer so I can close this question? I run a joomla-based website for a small church and now need a simple, cheap and effective solution for an audio podcast. I am looking for a solution that will do the following: User uploads audio files to service (preferably not to our own site) that is cheap, fast and simple to use. Dropbox for example? Files are easily embeddable into Joomla website articles to be played on the spot (through simple-to-use and media player). Preferably through RSS feeds (to make it easy to update every week). Files are downloadable. Files are viewable on iPhones and other smartphones. Solution can be broadcasted via iTunes. Solution doesn't need a lot of extra, new third party software. I'd rather keep it simple and familiar than have it be a complete new system but with a steep learning curve. At the moment we use vimeo to host the podcast, through video files. But we'd like to move to something simpler that doesn't involve a series of difficult steps to upload the files to the web.

  Read the article

• Why is MediaWiki auto-linking the word “files”

  - by dfrankow

  Our MediaWiki installation is auto-linking the word "files". So Here are some files: a, b, c would result in the word "files" being linked to http://ourhost/mediawiki/files. Why is that happening and how do I make it stop? I can use the nowiki tag, but perhaps it does not surprise you that the word "files" appears often, and it is aggravating to use that tag all the time. Here is some info on our MediaWiki installation from Special:Version. Yes, it's old. Installed software Product Version MediaWiki 1.16.5 PHP 5.2.14-pl0-gentoo (apache2handler) MySQL 5.0.84 Installed extensions Parser hooks GoogleDocs4MW (Version 1.1) Adds tag for Google Docs' spreadsheets display Jack Phoenix SyntaxHighlight (Version 1.0.8.6) Provides syntax highlighting using GeSHi Highlighter Brion Vibber, Tim Starling, Rob Church and Niklas Laxström WebServiceSequenceDiagram(Version 1.0) Render inline sequence diagrams using websequencediagrams.com Eddie Olsson Other MWSearch MWSearch plugin Kate Turner and Brion Vibber Extension functions efLucenePrefixSetup Parser extension tags gallery, googlespreadsheet, html, nowiki, pre, sequencediagram, source and syntaxhighlight Parser function hooks anchorencode, basepagename, basepagenamee, defaultsort, displaytitle, filepath, formatdate, formatnum, fullpagename, fullpagenamee, fullurl, fullurle, gender, grammar, int, language, lc, lcfirst, localurl, localurle, namespace, namespacee, ns, nse, numberingroup, numberofactiveusers, numberofadmins, numberofarticles, numberofedits, numberoffiles, numberofpages, numberofusers, numberofviews, padleft, padright, pagename, pagenamee, pagesincategory, pagesize, plural, protectionlevel, special, subjectpagename, subjectpagenamee, subjectspace, subjectspacee, subpagename, subpagenamee, tag, talkpagename, talkpagenamee, talkspace, talkspacee, uc, ucfirst and urlencode

  Read the article

• Setting up and using Bing Translate API Service for Machine Translation

  - by Rick Strahl

  Last week I spent quite a bit of time trying to set up the Bing Translate API service. I can honestly say this was one of the most screwed up developer experiences I've had in a long while - specifically related to the byzantine sign up process that Microsoft has in place. Not only is it nearly impossible to find decent documentation on the required signup process, some of the links in the docs are just plain wrong, and some of the account pages you need to access the actual account information once signed up are not linked anywhere from the administration UI. To make things even harder is the fact that the APIs changed a while back, with a completely new authentication scheme that's described and not directly linked documentation topic also made for a very frustrating search experience. It's a bummer that this is the case too, because the actual API itself is easy to use and works very well - fast and reasonably accurate (as accurate as you can expect machine translation to be). But the sign up process is a pain in the ass doubtlessly leaving many people giving up in frustration. In this post I'll try to hit all the points needed to set up to use the Bing Translate API in one place since such a document seems to be missing from Microsoft. Hopefully the API folks at Microsoft will get their shit together and actually provide this sort of info on their site… Signing Up The first step required is to create a Windows Azure MarketPlace account. Go to: https://datamarket.azure.com/ Sign in with your Windows Live Id If you don't have an account you will be taken to a registration page which you have to fill out. Follow the links and complete the registration. Once you're signed in you can start adding services. Click on the Data Link on the main page Select Microsoft Translator from the list This adds the Microsoft Bing Translator to your services. Pricing The page shows the pricing matrix and the free service which provides 2 megabytes for translations a month for free. Prices go up steeply from there. Pricing is determined by actual bytes of the result translations used. Max translations are 1000 characters so at minimum this means you get around 2000 translations a month for free. However most translations are probable much less so you can expect larger number of translations to go through. For testing or low volume translations this should be just fine. Once signed up there are no further instructions and you're left in limbo on the MS site. Register your Application Once you've created the Data association with Translator the next step is registering your application. To do this you need to access your developer account. Go to https://datamarket.azure.com/developer/applications/register Provide a ClientId, which is effectively the unique string identifier for your application (not your customer id!) Provide your name The client secret was auto-created and this becomes your 'password' For the redirect url provide any https url: https://microsoft.com works Give this application a description of your choice so you can identify it in the list of apps Now, once you've registered your application, keep track of the ClientId and ClientSecret - those are the two keys you need to authenticate before you can call the Translate API. Oddly the applications page is hidden from the Azure Portal UI. I couldn't find a direct link from anywhere on the site back to this page where I can examine my developer application keys. To find them you can go to: https://datamarket.azure.com/developer/applications You can come back here to look at your registered applications and pick up the ClientID and ClientSecret. Fun eh? But we're now ready to actually call the API and do some translating. Using the Bing Translate API The good news is that after this signup hell, using the API is pretty straightforward. To use the translation API you'll need to actually use two services: You need to call an authentication API service first, before you can call the actual translator API. These two APIs live on different domains, and the authentication API returns JSON data while the translator service returns XML. So much for consistency. Authentication The first step is authentication. The service uses oAuth authentication with a  bearer token that has to be passed to the translator API. The authentication call retrieves the oAuth token that you can then use with the translate API call. The bearer token has a short 10 minute life time, so while you can cache it for successive calls, the token can't be cached for long periods. This means for Web backend requests you typically will have to authenticate each time unless you build a more elaborate caching scheme that takes the timeout into account (perhaps using the ASP.NET Cache object). For low volume operations you can probably get away with simply calling the auth API for every translation you do. To call the Authentication API use code like this:/// /// Retrieves an oAuth authentication token to be used on the translate /// API request. The result string needs to be passed as a bearer token /// to the translate API. /// /// You can find client ID and Secret (or register a new one) at: /// https://datamarket.azure.com/developer/applications/ /// /// The client ID of your application /// The client secret or password /// public string GetBingAuthToken(string clientId = null, string clientSecret = null) { string authBaseUrl = https://datamarket.accesscontrol.windows.net/v2/OAuth2-13; if (string.IsNullOrEmpty(clientId) || string.IsNullOrEmpty(clientSecret)) { ErrorMessage = Resources.Resources.Client_Id_and_Client_Secret_must_be_provided; return null; } var postData = string.Format("grant_type=client_credentials&client_id={0}" + "&client_secret={1}" + "&scope=http://api.microsofttranslator.com", HttpUtility.UrlEncode(clientId), HttpUtility.UrlEncode(clientSecret)); // POST Auth data to the oauth API string res, token; try { var web = new WebClient(); web.Encoding = Encoding.UTF8; res = web.UploadString(authBaseUrl, postData); } catch (Exception ex) { ErrorMessage = ex.GetBaseException().Message; return null; } var ser = new JavaScriptSerializer(); var auth = ser.Deserialize<BingAuth>(res); if (auth == null) return null; token = auth.access_token; return token; } private class BingAuth { public string token_type { get; set; } public string access_token { get; set; } } This code basically takes the client id and secret and posts it at the oAuth endpoint which returns a JSON string. Here I use the JavaScript serializer to deserialize the JSON into a custom object I created just for deserialization. You can also use JSON.NET and dynamic deserialization if you are already using JSON.NET in your app in which case you don't need the extra type. In my library that houses this component I don't, so I just rely on the built in serializer. The auth method returns a long base64 encoded string which can be used as a bearer token in the translate API call. Translation Once you have the authentication token you can use it to pass to the translate API. The auth token is passed as an Authorization header and the value is prefixed with a 'Bearer ' prefix for the string. Here's what the simple Translate API call looks like:/// /// Uses the Bing API service to perform translation /// Bing can translate up to 1000 characters. /// /// Requires that you provide a CLientId and ClientSecret /// or set the configuration values for these two. /// /// More info on setup: /// http://www.west-wind.com/weblog/ /// /// Text to translate /// Two letter culture name /// Two letter culture name /// Pass an access token retrieved with GetBingAuthToken. /// If not passed the default keys from .config file are used if any /// public string TranslateBing(string text, string fromCulture, string toCulture, string accessToken = null) { string serviceUrl = "http://api.microsofttranslator.com/V2/Http.svc/Translate"; if (accessToken == null) { accessToken = GetBingAuthToken(); if (accessToken == null) return null; } string res; try { var web = new WebClient(); web.Headers.Add("Authorization", "Bearer " + accessToken); string ct = "text/plain"; string postData = string.Format("?text={0}&from={1}&to={2}&contentType={3}", HttpUtility.UrlEncode(text), fromCulture, toCulture, HttpUtility.UrlEncode(ct)); web.Encoding = Encoding.UTF8; res = web.DownloadString(serviceUrl + postData); } catch (Exception e) { ErrorMessage = e.GetBaseException().Message; return null; } // result is a single XML Element fragment var doc = new XmlDocument(); doc.LoadXml(res); return doc.DocumentElement.InnerText; } The first of this code deals with ensuring the auth token exists. You can either pass the token into the method manually or let the method automatically retrieve the auth code on its own. In my case I'm using this inside of a Web application and in that situation I simply need to re-authenticate every time as there's no convenient way to manage the lifetime of the auth cookie. The auth token is added as an Authorization HTTP header prefixed with 'Bearer ' and attached to the request. The text to translate, the from and to language codes and a result format are passed on the query string of this HTTP GET request against the Translate API. The translate API returns an XML string which contains a single element with the translated string. Using the Wrapper Methods It should be pretty obvious how to use these two methods but here are a couple of test methods that demonstrate the two usage scenarios:[TestMethod] public void TranslateBingWithAuthTest() { var translate = new TranslationServices(); string clientId = DbResourceConfiguration.Current.BingClientId; string clientSecret = DbResourceConfiguration.Current.BingClientSecret; string auth = translate.GetBingAuthToken(clientId, clientSecret); Assert.IsNotNull(auth); string text = translate.TranslateBing("Hello World we're back home!", "en", "de",auth); Assert.IsNotNull(text, translate.ErrorMessage); Console.WriteLine(text); } [TestMethod] public void TranslateBingIntegratedTest() { var translate = new TranslationServices(); string text = translate.TranslateBing("Hello World we're back home!","en","de"); Assert.IsNotNull(text, translate.ErrorMessage); Console.WriteLine(text); } Other API Methods The Translate API has a number of methods available and this one is the simplest one but probably also the most common one that translates a single string. You can find additional methods for this API here: http://msdn.microsoft.com/en-us/library/ff512419.aspx Soap and AJAX APIs are also available and documented on MSDN: http://msdn.microsoft.com/en-us/library/dd576287.aspx These links will be your starting points for calling other methods in this API. Dual Interface I've talked about my database driven localization provider here in the past, and it's for this tool that I added the Bing localization support. Basically I have a localization administration form that allows me to translate individual strings right out of the UI, using both Google and Bing APIs: As you can see in this example, the results from Google and Bing can vary quite a bit - in this case Google is stumped while Bing actually generated a valid translation. At other times it's the other way around - it's pretty useful to see multiple translations at the same time. Here I can choose from one of the values and driectly embed them into the translated text field. Lost in Translation There you have it. As I mentioned using the API once you have all the bureaucratic crap out of the way calling the APIs is fairly straight forward and reasonably fast, even if you have to call the Auth API for every call. Hopefully this post will help out a few of you trying to navigate the Microsoft bureaucracy, at least until next time Microsoft upends everything and introduces new ways to sign up again. Until then - happy translating… Related Posts Translation method Source on Github Translating with Google Translate without Google API Keys Creating a data-driven ASP.NET Resource Provider© Rick Strahl, West Wind Technologies, 2005-2013Posted in Localization  ASP.NET  .NET   Tweet !function(d,s,id){var js,fjs=d.getElementsByTagName(s)[0];if(!d.getElementById(id)){js=d.createElement(s);js.id=id;js.src="//platform.twitter.com/widgets.js";fjs.parentNode.insertBefore(js,fjs);}}(document,"script","twitter-wjs"); (function() { var po = document.createElement('script'); po.type = 'text/javascript'; po.async = true; po.src = 'https://apis.google.com/js/plusone.js'; var s = document.getElementsByTagName('script')[0]; s.parentNode.insertBefore(po, s); })();

  Read the article

• An easy way to create Side by Side registrationless COM Manifests with Visual Studio

  - by Rick Strahl

  Here's something I didn't find out until today: You can use Visual Studio to easily create registrationless COM manifest files for you with just a couple of small steps. Registrationless COM lets you use COM component without them being registered in the registry. This means it's possible to deploy COM components along with another application using plain xcopy semantics. To be sure it's rarely quite that easy - you need to watch out for dependencies - but if you know you have COM components that are light weight and have no or known dependencies it's easy to get everything into a single folder and off you go. Registrationless COM works via manifest files which carry the same name as the executable plus a .manifest extension (ie. yourapp.exe.manifest) I'm going to use a Visual FoxPro COM object as an example and create a simple Windows Forms app that calls the component - without that component being registered. Let's take a walk down memory lane… Create a COM Component I start by creating a FoxPro COM component because that's what I know and am working with here in my legacy environment. You can use VB classic or C++ ATL object if that's more to your liking. Here's a real simple Fox one: DEFINE CLASS SimpleServer as Session OLEPUBLIC FUNCTION HelloWorld(lcName) RETURN "Hello " + lcName ENDDEFINE Compile it into a DLL COM component with: BUILD MTDLL simpleserver FROM simpleserver RECOMPILE And to make sure it works test it quickly from Visual FoxPro: server = CREATEOBJECT("simpleServer.simpleserver") MESSAGEBOX( server.HelloWorld("Rick") ) Using Visual Studio to create a Manifest File for a COM Component Next open Visual Studio and create a new executable project - a Console App or WinForms or WPF application will all do. Go to the References Node Select Add Reference Use the Browse tab and find your compiled DLL to import  Next you'll see your assembly in the project. Right click on the reference and select Properties Click on the Isolated DropDown and select True Compile and that's all there's to it. Visual Studio will create a App.exe.manifest file right alongside your application's EXE. The manifest file created looks like this: xml version="1.0" encoding="utf-8"? assembly xsi:schemaLocation="urn:schemas-microsoft-com:asm.v1 assembly.adaptive.xsd" manifestVersion="1.0" xmlns:asmv1="urn:schemas-microsoft-com:asm.v1" xmlns:asmv2="urn:schemas-microsoft-com:asm.v2" xmlns:asmv3="urn:schemas-microsoft-com:asm.v3" xmlns:dsig="http://www.w3.org/2000/09/xmldsig#" xmlns:co.v1="urn:schemas-microsoft-com:clickonce.v1" xmlns:co.v2="urn:schemas-microsoft-com:clickonce.v2" xmlns="urn:schemas-microsoft-com:asm.v1" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" assemblyIdentity name="App.exe" version="1.0.0.0" processorArchitecture="x86" type="win32" / file name="simpleserver.DLL" asmv2:size="27293" hash xmlns="urn:schemas-microsoft-com:asm.v2" dsig:Transforms dsig:Transform Algorithm="urn:schemas-microsoft-com:HashTransforms.Identity" / dsig:Transforms dsig:DigestMethod Algorithm="http://www.w3.org/2000/09/xmldsig#sha1" / dsig:DigestValuepuq+ua20bbidGOWhPOxfquztBCU=dsig:DigestValue hash typelib tlbid="{f10346e2-c9d9-47f7-81d1-74059cc15c3c}" version="1.0" helpdir="" resourceid="0" flags="HASDISKIMAGE" / comClass clsid="{af2c2811-0657-4264-a1f5-06d033a969ff}" threadingModel="Apartment" tlbid="{f10346e2-c9d9-47f7-81d1-74059cc15c3c}" progid="simpleserver.SimpleServer" description="simpleserver.SimpleServer" / file assembly Now let's finish our super complex console app to test with: using System; using System.Collections.Generic; using System.Text; namespace ConsoleApplication1 {     class Program     {         static voidMain(string[] args)         { Type type = Type.GetTypeFromProgID("simpleserver.simpleserver",true); dynamic server = Activator.CreateInstance(type); Console.WriteLine(server.HelloWorld("rick")); Console.ReadLine(); } } } Now run the Console Application… As expected that should work. And why not? The COM component is still registered, right? :-) Nothing tricky about that. Let's unregister the COM component and then re-run and see what happens. Go to the Command Prompt Change to the folder where the DLL is installed Unregister with: RegSvr32 -u simpleserver.dll      To be sure that the COM component no longer works, check it out with the same test you used earlier (ie. o = CREATEOBJECT("SimpleServer.SimpleServer") in your development environment or VBScript etc.). Make sure you run the EXE and you don't re-compile the application or else Visual Studio will complain that it can't find the COM component in the registry while compiling. In fact now that we have our .manifest file you can remove the COM object from the project. When you run run the EXE from Windows Explorer or a command prompt to avoid the recompile. Watch out for embedded Manifest Files Now recompile your .NET project and run it… and it will most likely fail! The problem is that .NET applications by default embeds a manifest file into the compiled EXE application which results in the externally created manifest file being completely ignored. Only one manifest can be applied at a time and the compiled manifest takes precedency. Uh, thanks Visual Studio - not very helpful… Note that if you use another development tool like Visual FoxPro to create your EXE this won't be an issue as long as the tool doesn't automatically add a manifest file. Creating a Visual FoxPro EXE for example will work immediately with the generated manifest file as is. If you are using .NET and Visual Studio you have a couple of options of getting around this: Remove the embedded manifest file Copy the contents of the generated manifest file into a project manifest file and compile that in To remove an embedded manifest in a Visual Studio project: Open the Project Properties (Alt-Enter on project node) Go down to Resources | Manifest and select | Create Application without a Manifest   You can now add use the external manifest file and it will actually be respected when the app runs. The other option is to let Visual Studio create the manifest file on disk and then explicitly add the manifest file into the project. Notice on the dialog above I did this for app.exe.manifest and the manifest actually shows up in the list. If I select this file it will be compiled into the EXE and be used in lieu of any external files and that works as well. Remove the simpleserver.dll reference so you can compile your code and run the application. Now it should work without COM registration of the component. Personally I prefer external manifests because they can be modified after the fact - compiled manifests are evil in my mind because they are immutable - once they are there they can't be overriden or changed. So I prefer an external manifest. However, if you are absolutely sure nothing needs to change and you don't want anybody messing with your manifest, you can also embed it. The option to either is there. Watch for Manifest Caching While working trying to get this to work I ran into some problems at first. Specifically when it wasn't working at first (due to the embedded schema) I played with various different manifest layouts in different files etc.. There are a number of different ways to actually represent manifest files including offloading to separate folder (more on that later). A few times I made deliberate errors in the schema file and I found that regardless of what I did once the app failed or worked no amount of changing of the manifest file would make it behave differently. It appears that Windows is caching the manifest data for a given EXE or DLL. It takes a restart or a recompile of either the EXE or the DLL to clear the caching. Recompile your servers in order to see manifest changes unless there's an outright failure of an invalid manifest file. If the app starts the manifest is being read and caches immediately. This can be very confusing especially if you don't know that it's happening. I found myself always recompiling the exe after each run and before making any changes to the manifest file. Don't forget about Runtimes of COM Objects In the example I used above I used a Visual FoxPro COM component. Visual FoxPro is a runtime based environment so if I'm going to distribute an application that uses a FoxPro COM object the runtimes need to be distributed as well. The same is true of classic Visual Basic applications. Assuming that you don't know whether the runtimes are installed on the target machines make sure to install all the additional files in the EXE's directory alongside the COM DLL. In the case of Visual FoxPro the target folder should contain: The EXE  App.exe The Manifest file (unless it's compiled in) App.exe.manifest The COM object DLL (simpleserver.dll) Visual FoxPro Runtimes: VFP9t.dll (or VFP9r.dll for non-multithreaded dlls), vfp9rENU.dll, msvcr71.dll All these files should be in the same folder. Debugging Manifest load Errors If you for some reason get your manifest loading wrong there are a couple of useful tools available - SxSTrace and SxSParse. These two tools can be a huge help in debugging manifest loading errors. Put the following into a batch file (SxS_Trace.bat for example): sxstrace Trace -logfile:sxs.bin sxstrace Parse -logfile:sxs.bin -outfile:sxs.txt Then start the batch file before running your EXE. Make sure there's no caching happening as described in the previous section. For example, if I go into the manifest file and explicitly break the CLSID and/or ProgID I get a detailed report on where the EXE is looking for the manifest and what it's reading. Eventually the trace gives me an error like this: INFO: Parsing Manifest File C:\wwapps\Conf\SideBySide\Code\app.EXE.     INFO: Manifest Definition Identity is App.exe,processorArchitecture="x86",type="win32",version="1.0.0.0".     ERROR: Line 13: The value {AAaf2c2811-0657-4264-a1f5-06d033a969ff} of attribute clsid in element comClass is invalid. ERROR: Activation Context generation failed. End Activation Context Generation. pinpointing nicely where the error lies. Pay special attention to the various attributes - they have to match exactly in the different sections of the manifest file(s). Multiple COM Objects The manifest file that Visual Studio creates is actually quite more complex than is required for basic registrationless COM object invokation. The manifest file can be simplified a lot actually by stripping off various namespaces and removing the type library references altogether. Here's an example of a simplified manifest file that actually includes references to 2 COM servers: xml version="1.0" encoding="utf-8"? assembly xmlns="urn:schemas-microsoft-com:asm.v1" manifestVersion="1.0" assemblyIdentity name="App.exe" version="1.0.0.0" processorArchitecture="x86" type="win32" / file name="simpleserver.DLL" comClass clsid="{af2c2811-0657-4264-a1f5-06d033a969ff}" threadingModel="Apartment" progid="simpleserver.SimpleServer" description="simpleserver.SimpleServer" / file file name = "sidebysidedeploy.dll" comClass clsid="{EF82B819-7963-4C36-9443-3978CD94F57C}" progid="sidebysidedeploy.SidebysidedeployServer" description="SidebySideDeploy Server" threadingModel="apartment" / file assembly Simple enough right? Routing to separate Manifest Files and Folders In the examples above all files ended up in the application's root folder - all the DLLs, support files and runtimes. Sometimes that's not so desirable and you can actually create separate manifest files. The easiest way to do this is to create a manifest file that 'routes' to another manifest file in a separate folder. Basically you create a new 'assembly identity' via a named id. You can then create a folder and another manifest with the id plus .manifest that points at the actual file. In this example I create: App.exe.manifest A folder called App.deploy A manifest file in App.deploy All DLLs and runtimes in App.deploy Let's start with that master manifest file. This file only holds a reference to another manifest file: App.exe.manifest xml version="1.0" encoding="UTF-8" standalone="yes"? assembly xmlns="urn:schemas-microsoft-com:asm.v1" manifestVersion="1.0" assemblyIdentity name="App.exe" version="1.0.0.0" processorArchitecture="x86" type="win32" / dependency dependentAssembly assemblyIdentity name="App.deploy" version="1.0.0.0" type="win32" / dependentAssembly dependency assembly   Note this file only contains a dependency to App.deploy which is another manifest id. I can then create App.deploy.manifest in the current folder or in an App.deploy folder. In this case I'll create App.deploy and in it copy the DLLs and support runtimes. I then create App.deploy.manifest. App.deploy.manifest xml version="1.0" encoding="UTF-8" standalone="yes"? assembly xmlns="urn:schemas-microsoft-com:asm.v1" manifestVersion="1.0" assemblyIdentity name="App.deploy" type="win32" version="1.0.0.0" / file name="simpleserver.DLL" comClass clsid="{af2c2811-0657-4264-a1f5-06d033a969ff}" threadingModel="Apartment" progid="simpleserver.SimpleServer" description="simpleserver.SimpleServer" / file file name="sidebysidedeploy.dll" comClass clsid="{EF82B819-7963-4C36-9443-3978CD94F57C}" threadingModel="Apartment" progid="sidebysidedeploy.SidebysidedeployServer" description="SidebySideDeploy Server" / file assembly   In this manifest file I then host my COM DLLs and any support runtimes. This is quite useful if you have lots of DLLs you are referencing or if you need to have separate configuration and application files that are associated with the COM object. This way the operation of your main application and the COM objects it interacts with is somewhat separated. You can see the two folders here:   Routing Manifests to different Folders In theory registrationless COM should be pretty easy in painless - you've seen the configuration manifest files and it certainly doesn't look very complicated, right? But the devil's in the details. The ActivationContext API (SxS - side by side activation) is very intolerant of small errors in the XML or formatting of the keys, so be really careful when setting up components, especially if you are manually editing these files. If you do run into trouble SxsTrace/SxsParse are a huge help to track down the problems. And remember that if you do have problems that you'll need to recompile your EXEs or DLLs for the SxS APIs to refresh themselves properly. All of this gets even more fun if you want to do registrationless COM inside of IIS :-) But I'll leave that for another blog post…© Rick Strahl, West Wind Technologies, 2005-2011Posted in COM  .NET  FoxPro   Tweet (function() { var po = document.createElement('script'); po.type = 'text/javascript'; po.async = true; po.src = 'https://apis.google.com/js/plusone.js'; var s = document.getElementsByTagName('script')[0]; s.parentNode.insertBefore(po, s); })();

  Read the article

• CodePlex Daily Summary for Sunday, October 27, 2013

  CodePlex Daily Summary for Sunday, October 27, 2013Popular ReleasesASP.net MVC Awesome - jQuery Ajax Helpers: 3.5.3 (mvc5): version 3.5.3 - support for mvc5 version 3.5.2 - fix for setting single value to multivalue controls - datepicker min max date offset fix - html encoding for keys fix - enable Column.ClientFormatFunc to be a function call that will return a function version 3.5.1 ========================== - fixed html attributes rendering - fixed loading animation rendering - css improvements version 3.5 ========================== - autosize for all popups ( can be turned off by calling in js...Media Companion: Media Companion MC3.585b: IMDB plot scraping Fixed. New* Movie - Rename Folder using Movie Set, option to move ignored articles to end of Movie Set, only for folder renaming. Fixed* Media Companion - Fixed if using profiles, config files would blown up in size due to some settings duplicating. * Ignore Article of An was cutting of last character of movie title. * If Rescraping title, sort title changed depending on 'Move article to end of Sort Title' setting. * Movie - If changing Poster source order, list would beco...MoreTerra (Terraria World Viewer): MoreTerra 1.11.4: Release 1.11.4 =========== = Compatibility = =========== Updated to add the new tiles/walls in 1.2.1Gac Library -- C++ Utilities for GPU Accelerated GUI and Script: Gaclib 0.5.5.0: Gaclib.zip contains the following content GacUIDemo Demo solution and projects Public Source GacUI library Document HTML document. Please start at reference_gacui.html Content Necessary CSS/JPG files for document. Improvements to the previous release Add 1 demos Editor.Toolstrip.Document Added new features GuiDocumentViewer and GuiDocumentLabel is editable like an RichTextEdit control.BlackJumboDog: Ver5.9.7: 2013.10.24 Ver5.9.7 (1)FTP???????、２?????????????shift-jis????????????? (2)????HTTP????、???????POST??????????????????Fluent Validation for .NET: 5.0: If you find FluentValidation useful, please consider making a donation. Donate to FluentValidation Changes in this release: Display name is now lazily-loaded by default (as a result, localization via DisplayAttribute now works correctly) Added WebApi integration (contributed by dmorganb) Support for MVC 5 (package names are FluentValidation.Mvc5 and FluentValidation.Mvc5-signed) Remove support for partial trustAdder: Adder 1.0: First and I hope last version.TFS Workspaces Cleaner: TFS Workspaces Cleaner v1.0.5045: This is v1.0 of TFS Workspaces Cleaner, a tool that deletes Team Foundation Server workspaces that have not been accessed in a number of days, along with their files locally on disk.Config Transformation Tool: Config Transformation Tool v1.5: [+] Add encoding parameter to specify default encoding. [!] Default encoding has been changed to utf8 (Unicode before). [b] If you use set of parameters where last of parameter uses quotes - tool trims last quote, which changes parameter value. [b] If 'indent' was specified, but not 'indentchars' - tool fails with ArgumentNullException. [b] If verbose flag is not specified tool does not output any error logs to console.CtrlAltStudio Viewer: CtrlAltStudio Viewer 1.1.0.34322 Alpha 4: This experimental release of the CtrlAltStudio Viewer includes the following significant features: Oculus Rift support. Stereoscopic 3D display support. Based on Firestorm viewer 4.4.2 codebase. For more details, see the release notes linked to below. Release notes: http://ctrlaltstudio.com/viewer/release-notes/1-1-0-34322-alpha-4 Support info: http://ctrlaltstudio.com/viewer/support Privacy policy: http://ctrlaltstudio.com/viewer/privacy Disclaimer: This software is not provided or sup...VsTortoise - a TortoiseSVN add-in for Microsoft Visual Studio: VsTortoise Build 32 Beta: Note: This release does not work with custom VsTortoise toolbars. These get removed every time when you shutdown Visual Studio. (#7940) This release has been tested with Visual Studio 2008, 2010, 2012 and 2013, using TortoiseSVN 1.6, 1.7 and 1.8. It should also still work with Visual Studio 2005, but I couldn't find anyone to test it in VS2005. Build 32 (beta) changelogNew: Added Visual Studio 2013 support New: Added Visual Studio 2012 support New: Added SVN 1.8 support New: Added 'Ch...ABCat: ABCat v.2.0.1a: ?????????? ???????? ? ?????????? ?????? ???? ??? Win7. ????????? ?????? ????????? ?? ???????. ????? ?????, ???? ????? ???????? ????????? ?????????? ????????? "?? ??????? ????? ???????????? ?????????? ??????...", ?? ?????????? ??????? ? ?????????? ?????? Microsoft SQL Ce ?? ????????? ??????: http://www.microsoft.com/en-us/download/details.aspx?id=17876. ???????? ?????? x64 ??? x86 ? ??????????? ?? ?????? ???????????? ???????. ??? ??????? ????????? ?? ?????????? ?????? Entity Framework, ? ???? ...patterns & practices: Data Access Guidance: Data Access Guidance 2013: This is the 2013 release of Data Access Guidance. The documentation for this RI is also available on MSDN: Data Access for Highly-Scalable Solutions: Using SQL, NoSQL, and Polyglot Persistence: http://msdn.microsoft.com/en-us/library/dn271399.aspxLINQ to Twitter: LINQ to Twitter v2.1.10: Supports .NET 3.5, .NET 4.0, .NET 4.5, Silverlight 4.0, Windows Phone 7.1, Windows Phone 8, Client Profile, Windows 8, and Windows Azure. 100% Twitter API coverage. Also supports Twitter API v1.1! Also on NuGet.TerrariViewer: TerrariViewer v7.2 [Terraria Inventory Editor]: Added "Check for Update" button Hopefully fixed Windows XP issue You can now backspace in Item stack fieldsSimple Injector: Simple Injector v2.3.6: This patch releases fixes one bug concerning resolving open generic types that contain nested generic type arguments. Nested generic types were handled incorrectly in certain cases. This affects RegisterOpenGeneric and RegisterDecorator. (work item 20332)Virtual Wifi Hotspot for Windows 7 & 8: Virtual Router Plus 2.6.0: Virtual Router Plus 2.6.0Fast YouTube Downloader: Fast YouTube Downloader 2.3.0: Fast YouTube DownloaderMagick.NET: Magick.NET 6.8.7.101: Magick.NET linked with ImageMagick 6.8.7.1. Breaking changes: - Renamed Matrix classes: MatrixColor = ColorMatrix and MatrixConvolve = ConvolveMatrix. - Renamed Depth method with Channels parameter to BitDepth and changed the other method into a property.VidCoder: 1.5.9 Beta: Added Rip DVD and Rip Blu-ray AutoPlay actions for Windows: now you can have VidCoder start up and scan a disc when you insert it. Go to Start -> AutoPlay to set it up. Added error message for Windows XP users rather than letting it crash. Removed "quality" preset from list for QSV as it currently doesn't offer much improvement. Changed installer to ignore version number when copying files over. Should reduce the chances of a bug from me forgetting to increment a version number. Fixed ...New ProjectsC# In A Nutshell: TestDNN (DotNetNuke) Farsi - ?? ?? ?? (??? ?? ????) ?????: ?????? ????? ?????? ??? ?? ?? ?? ?? (??? ?? ????).examquestions: This is a uni projectFishing in Grenada Website: This project is to show progress in developing a Community Site for the Web Application Development Course at the University of Hertfordshire.HashTag Enterprise Library Logging Application Block Extensions: This library allows development teams using EntLib to deliver consistent log messages by using greatly simplified methods for writing messages to Logging Block.Ivion OS: Ivion OS adalah sistem operasi asli buatan anak Indonesia yang ditulis dengan bahasa Assembly.MVC4 Samples: You can easily develope an application in MVC Framework by the code samples provided by Microsoft Requirements:VS 2012My Journal Tracker - a DayOne Snapshot Client for Microsoft Windows: write your DayOne journal (a iOS and Mac OSX journal app) on your Windows PC. Make nice snapshots and view your journal on your iPad.Nigerian food lovers: This site attends to the needs of people who love Nigerian food. It brings them together and helps them answer basic questions.Online Radio 3.1: Software for listening online radio streams.OpenAntrag: Über das Portal OpenAntrag können Bürger über Fraktionen oder Einzelabgeordnete der Piratenpartei ihre Ideen und Wünsche einbringen. ORI_T1_2013_2: ORI, UFSCar, Dicionario, Tesauro, Hash, TabelaPiGest: Gestionale Open Source per piccole imprese.The Barter Website: The aim is to create a Web 2.0 Page which will allow it´s users to share goods they don´t need anymore in exchange for goods they currently need.Web Scripting - Assignment 1 - Simple Addition Project: Assignment 1 - Initial web 2.0 site idea and Subversion * Module - Web Application Development * University of HertfordshireWinPath Manager: The program is a utility to help users to perform the edits the window path variable and auto shorten it .

  Read the article

• VS2008 C# error ".ctor' not supported by language

  - by Jim Jones

  C# code: class Program { static void Main(string[] args) { TFWrapper tf; String lexDir = "......."; String lic = "........"; String key = "........."; ArrayList cats = new ArrayList(); Boolean useConj = false; String lang = "english"; String encoding = "auto"; tf = new TFWrapper(lexDir, lic, key, useConj, lang, encoding); } } Managed C++ method being called: TFWrapper::TFWrapper(String^ mlexDir, String^ mlic, String^ mkey, ArrayList catList, Boolean^ m_useConj, String^ m_lang, String^ m_encoding); Getting '.ctor' is not supported by the language error on the last line of C#

  Read the article

• Axis/SOAP service styles and interoperability

  - by Thilo

  There are four "styles" of service in Axis. RPC services use the SOAP RPC conventions, and also the SOAP "section 5" encoding. Document services do not use any encoding (so in particular, you won't see multiref object serialization or SOAP-style arrays on the wire) but DO still do XML<-Java databinding. Wrapped services are just like document services, except that rather than binding the entire SOAP body into one big structure, they "unwrap" it into individual parameters. Message services receive and return arbitrary XML in the SOAP Envelope without any type mapping / data binding. If you want to work with the raw XML of the incoming and outgoing SOAP Envelopes, write a message service. So, if I use anything else except the first option(SOAP RPC Section 5), how does this impact interoperability? If someone says they want a SOAP service (including WSDL), does this mean that SOAP RPC conventions are expected? Can the other three styles still be used when the other end is not implemented with Axis?

  Read the article

• Convert xml as string

  - by hakish

  i have a scenario where in i need to send an xml as a tag content in a SOAP request message to a webservice for example <arg_1><xml version="1.0" encoding="UTF-8"?><sometag><somemoretag>abcd</somemoretag></sometag></arg_1></code> arg_1 happens to be an String parameter to a webservice. So i bring in a CDATA section for this <arg_1><![CDATA[<xml version="1.0" encoding="UTF-8"?><sometag><somemoretag>abcd</somemoretag></sometag>]]></arg_1> But this keeps throwing me an exception org.xml.sax.SAXException: WSWS3084E: Error: SimpleDeserializer encountered a child element, which is NOT expected, in something it was trying to deserialize. Message being parsed: I keep getting this exception. Has anyone seen this before??

  Read the article

• OTP or S/KEY - Conversion of Hex string into 6 readable words

  - by Garbit

  As seen in RFC2289 (S/KEY), there is a list of words that must be used when converting the hexadecimal string into a readable format. How would i go about doing so? The RFC mentions: The one-time password is therefore converted to, and accepted as, a sequence of six short (1 to 4 letter) English words. Each word is chosen from a dictionary of 2048 words; at 11 bits per word, all one-time passwords may be encoded. Read more: http://www.faqs.org/rfcs/rfc1760.html#ixzz0fu7QvXfe Does this mean converting a hex into decimal and then using that as an index for an array of words. The other thing it could be is using a text encoding e.g. 1111 might equal dog in UTF-8 encoding thanks in advance for your help!

  Read the article

• MarshalException: CORBA MARSHAL 1398079745 / Could find classes

  - by user302049

  Hi, we did a cleanbuild in netbeans, checked the jdk version and deployed everything at the server but still got the following error. Can somebody help? javax.servlet.ServletException: #{RegistrationController.register}: javax.ejb.EJBException: nested exception is: java.rmi.MarshalException: CORBA MARSHAL 1398079745 Maybe; nested exception is: org.omg.CORBA.MARSHAL: ----------BEGIN server-side stack trace---------- org.omg.CORBA.MARSHAL: vmcid: SUN minor code: 257 completed: at com.sun.corba.ee.impl.logging.ORBUtilSystemException.couldNotFindClass(ORBUtilSystemException.java:9679) at com.sun.corba.ee.impl.logging.ORBUtilSystemException.couldNotFindClass(ORBUtilSystemException.java:9694) at com.sun.corba.ee.impl.encoding.CDRInputStream_1_0.read_value(CDRInputStream_1_0.java:1042) at com.sun.corba.ee.impl.encoding.CDRInputStream_1_0.read_value(CDRInputStream_1_0.java:896) ...

  Read the article

• Using the PayPal API in an iPhone application

  - by jaynaiphone

  Hello I want to use Paypal in my iphone application, I have find the soapRequest to integrating the paypal API. My code is NSString *soapMessage = [NSString stringWithFormat: @"<?xml version=\"1.0\" encoding=\"UTF-8\"?>\n" "<SOAP-ENV:Envelope xmlns:xsi= \"http://www.w3.org/2001/XMLSchema-instance\" xmlns:SOAP-ENC=\"http://schemas.xmlsoap.org/soap/encoding/\" xmlns:SOAP-ENV=\"http://schemas.xmlsoap.org/soap/envelope/\" xmlns:xsd=\"http://www.w3.org/2001/XMLSchema\" SOAP-ENV:encodingStyle=\"http://schemas.xmlsoap.org/soap/encoding/\">\n" "<SOAP-ENV:Header>\n" "<RequesterCredentials xmlns=\"urn:ebay:api:PayPalAPI\">\n" "<Credentials xmlns=\"urn:ebay:apis:eBLBaseComponents\">\n" "<Username>api_username</Username>\n" "<Password>api_password</Password>\n" "<Signature/>\n" "<Subject/>\n" "</Credentials>\n" "</RequesterCredentials>\n" "</SOAP-ENV:Header>\n" "<SOAP-ENV:Body>\n" "<specific_api_name_Req xmlns=\"urn:ebay:api:PayPalAPI\">\n" "<specific_api_name_Request>\n" "<Version xmlns=urn:ebay:apis:eBLBaseComponents”>service_version</Version>\n" "<required_or_optional_fields xsi:type=”some_type_here”>\n" "</required_or_optional_fields>\n" "</specific_api_name_Request>\n" "</specific_api_name_Req>\n" "</SOAP-ENV:Body>\n" "</SOAP-ENV:Envelope>\n"]; NSLog(@"Soap message===%@",soapMessage); NSString *parameterString = [NSString stringWithFormat:@"USER=%@&PWD=%@&SIGNATURE=%@&VERSION=57.0&METHOD=SetMobileCheckout&AMT=%.2f&CURRENCYCODE=USD&DESC=%@&RETURNURL=%@", userName, password, signature, donationAmount, @"Some Charge", returnCallURL]; NSLog(parameterString); NSURL *url = [NSURL URLWithString:paypalUrlNVP]; NSMutableURLRequest *theRequest = [NSMutableURLRequest requestWithURL:url]; NSString *msgLength = [NSString stringWithFormat:@"%d", [parameterString length]]; [theRequest addValue: msgLength forHTTPHeaderField:@"Content-Length"]; [theRequest setHTTPMethod:@"POST"]; [theRequest setHTTPBody: [parameterString dataUsingEncoding:NSUTF8StringEncoding]]; NSURLConnection *theConnection = [[NSURLConnection alloc] initWithRequest:theRequest delegate:self]; if( theConnection ){ webData = [[NSMutableData data] retain]; // [self displayConnectingView]; }else{ NSLog(@"theConnection is NULL"); } But here I am not getting the value of paypalUrlNVP. How can i get it?? And if possible then please give some example of paypalAPI integration in iphone. I also want to use checkout functionality.I am new in this field so I have no idea about it. So, kindly give me whole sample code. Thanks in advance.

  Read the article

• Is it possible to tweak TStringField to work like TWideStringField in Delphi?

  - by mjustin

  We want to use Unicode with Delphi 2009 and Interbase, and found that to switch the character encoding from WIN1252 to UNICODE_FSS we first have to replace all instances of TStringField with TWideStringField in all datamodules. For around 60 datamodules, we can not simply do this over one weekend. I can see only two options for a migration strategy: find a workaround which allows to use the existing TStringField fields without triggering the 'expected: TWideStringField' error or remove all persistent fields to avoid the string type conflict As far as I know the field types for persistent database fields are registered in some kind of class registry. Could we use this to make Delphi believe that a TStringField is ok for a Interbase character column with UNICODE_FSS encoding? Or can we use a commercial dbExpress driver which work with TStringField in both cases? See also my related question: http://stackoverflow.com/questions/2302670/delphi-dbexpress-and-interbase-unicode-migration-steps-and-risks

  Read the article

• Handling Errors from HttpWebRequest.GetResponse

  - by Jason

  Hey experts - I'm having a ridiculous time trying to get an SMS API working (ZeepMobile, if you're interested) with .NET... I've been around .NET for a few years, but with all this social networking and API stuff, I need to get into the HttpWebRequest a bit. I'm new at it, but not completely new; I was able to hook up my site to Twitter without too much fuss (ie, I was able to modify someone's code to work for me). Anyways, the way their API works is to send an SMS message, you send them a POST and they respond back to you. I can send it just fine, but every time I do, rather than echo back something helpful to figure out what the error is, I get the Yellow Error Page Of Death (YEPOD) saying something to the effect of "The remote server returned an error: (400) Bad Request." This occurs on my line: '...creation of httpwebrequest here...' Dim myWebResponse As WebResponse myWebResponse = request.GetResponse() '<--- error line Is there any way to simply receive the error from the server rather than have the webserver throw an exception and give me the YEPOD? Or better yet, can anyone post a working example of their Zeep code? :) Thanks! EDIT: Here's my whole code block: Public Shared Function SendTextMessage(ByVal username As String, _ ByVal txt As String) As String Dim content As String = "user_id=" + _ username + "&body=" + Current.Server.UrlEncode(txt) Dim httpDate As String = DateTime.Now.ToString("r") Dim canonicalString As String = API_KEY & httpDate & content Dim encoding As New System.Text.UTF8Encoding Dim hmacSha As New HMACSHA1(encoding.GetBytes(SECRET_ACCESS_KEY)) Dim hash() As Byte = hmacSha.ComputeHash(encoding.GetBytes(canonicalString)) Dim b64 As String = Convert.ToBase64String(hash) 'connect with zeep' Dim request As HttpWebRequest = CType(WebRequest.Create(_ "https://api.zeepmobile.com/messaging/2008-07-14/send_message"), HttpWebRequest) request.Method = "POST" request.ServicePoint.Expect100Continue = False ' set the authorization levels' request.Headers.Add("Authorization", "Zeep " & API_KEY & ":" & b64) request.ContentType = "application/x-www-form-urlencoded" request.ContentLength = content.Length ' set up and write to stream' Dim reqStream As New StreamWriter(request.GetRequestStream()) reqStream.Write(content) reqStream.Close() Dim msg As String = "" msg = reqStream.ToString Dim myWebResponse As WebResponse Dim myResponseStream As Stream Dim myStreamReader As StreamReader myWebResponse = request.GetResponse() myResponseStream = myWebResponse.GetResponseStream() myStreamReader = New StreamReader(myResponseStream) msg = myStreamReader.ReadToEnd() myStreamReader.Close() myResponseStream.Close() ' Close the WebResponse' myWebResponse.Close() Return msg End Function

  Read the article

• Android - Display HTML Formatted String

  - by Soren

  I need an example of how to display the strings that I have marked up with simple html into a TextView. I have found "Spanned fromHtml(String source)", but I don't know how to plug it into my java code. Here is my Java: package com.SorenWinslow.TriumphHistory; import android.app.ListActivity; import android.os.Bundle; import android.widget.ArrayAdapter; public class TriumphHistory extends ListActivity { String[] HistoryList; /** Called when the activity is first created. */ @Override public void onCreate(Bundle savedInstanceState) { super.onCreate(savedInstanceState); setContentView(R.layout.main); ArrayAdapter<String> adapter; HistoryList = getResources().getStringArray(R.array.history); adapter = new ArrayAdapter<String> (this,R.layout.historylistlayout,HistoryList); setListAdapter(adapter); } } Here is a sample of history: <?xml version="1.0" encoding="utf-8"?> <resources> <string-array name="history"> <item><b>1883</b><br/>Some stuff happened</item> <item><b>1884</b><br/>Some more stuff happened <i>before</i> the other stuff </item> <resources> Here is my historylistlayout.xml: <?xml version="1.0" encoding="utf-8"?> <TextView xmlns:android="http://schemas.android.com/apk/res/android" android:id="@android:id/text1" android:layout_width="fill_parent" android:layout_height="wrap_content" android:textAppearance="?android:attr/textAppearanceLarge" android:gravity="center_vertical" android:textColor="#ffffff" android:background="#000050" android:layout_marginTop="5px" android:minHeight="?android:attr/listPreferredItemHeight" android:padding="3px" android:textSize="8pt" android:layout_gravity="top|left"/> And here is my main.xml <?xml version="1.0" encoding="utf-8"?> <LinearLayout xmlns:android="http://schemas.android.com/apk/res/android" android:orientation="vertical" android:textColor="#ffffff" android:background="#000080" android:isScrollContainer="true" android:layout_height="fill_parent" android:layout_width="fill_parent" android:scrollbarStyle="insideOverlay"> <ListView xmlns:android="http://schemas.android.com/apk/res/android" android:id="@android:id/list" android:layout_width="fill_parent" android:layout_height="wrap_content" android:clickable="true" android:dividerHeight="1px"/> </LinearLayout>

  Read the article

• How do I upload an NSImage(NSData)to Twitpic with OAMutableURLRequest?

  - by timothy5216

  I'm using OAConsumer in my xAuth twitterEngine and i'm adding Twitpic OAuth Echo to it. But it won't POST the NSData. here is some of my code: //other file NSArray *reps = [[imageToUpload image] representations]; NSData *imageData = [NSBitmapImageRep representationOfImageRepsInArray:reps usingType:NSJPEGFileType properties:nil]; [twitter testUploadImageData:imageData withMessage:@"Hello WORLD!!" toURL:[NSURL URLWithString:uploadURL.stringValue]]; // - (void)testUploadImageData:(NSData *)data withMessage:(NSString *)message toURL:(NSURL *)url; { //url = @"http://api.twitpic.com/2/upload.xml" //message = @"Hello WORLD!!" NSAutoreleasePool *pool = [[NSAutoreleasePool alloc] init]; NSString *String = [[NSString alloc] initWithData:data encoding:NSASCIIStringEncoding]; NSLog(@"dataString: %@",String); OAMutableURLRequest *request = [[OAMutableURLRequest alloc] initWithURL:url consumer:self.consumer token:_accessToken realm:nil signatureProvider:nil]; // Setup POST body [request setHTTPMethod:@"POST"]; //NSString *stringBoundary = [NSString stringWithString:@"0xKhTmLbOuNdArY"]; //NSString *contentType = [NSString stringWithFormat:@"multipart/form-data; boundary=%@", stringBoundary]; // NSString *stringBoundarySeparator = [NSString stringWithFormat:@"\r\n--%@\r\n", stringBoundary]; /* NSMutableString *postString = [NSMutableString string]; [postString appendString:@"\r\n"]; [postString appendString:stringBoundarySeparator]; [postString appendString:[NSString stringWithFormat:@"Content-Disposition: form-data; name=\"message\"\r\n\r\n%@", message]]; [postString appendString:stringBoundarySeparator]; [postString appendString:[NSString stringWithFormat:@"Content-Disposition: form-data; name=\"media\"; filename=\"%@\"\r\n", @"file.jpg"]]; [postString appendString:@"Content-Type: image/jpg\r\n"]; [postString appendString:@"Content-Transfer-Encoding: binary\r\n\r\n"]; // Setting up the POST request's multipart/form-data body NSMutableData *postBody = [NSMutableData data]; [postBody appendData:[postString dataUsingEncoding:NSUTF8StringEncoding]]; [postBody appendData:data]; [request setHTTPBody:postBody]; */ [request setHTTPMethod:@"POST"]; NSString *thing = [[NSString alloc] initWithData:data encoding:NSASCIIStringEncoding]; NSLog(@"%@",thing); [request setParameters:[NSArray arrayWithObjects: [OARequestParameter requestParameterWithName:@"oauth_token" value:_accessToken.key], [OARequestParameter requestParameterWithName:@"X-Auth-Service-Provider" value:@"https://api.twitter.com/1/account/verify_credentials.json"], [OARequestParameter requestParameterWithName:@"key" value:@"my-key-here :P"], [OARequestParameter requestParameterWithName:@"message" value:message], //iv'e changed this many times. I was just trying this to see if it works [OARequestParameter requestParameterWithName:@"media" value:thing], nil]]; OAAsynchronousDataFetcher *dataFetcher = [[OAAsynchronousDataFetcher alloc] init]; [dataFetcher initWithRequest:request delegate:self didFinishSelector:@selector(uploadDidUpload:withData:) didFailSelector:@selector(uploadDidFail:withData:)]; [dataFetcher start]; [dataFetcher release]; [request release]; [pool drain]; } I'm authenticated but it still won't POST the data :(

  Read the article

• Create multi-part message in MIME format Freemarker template

  - by Mat Banik

  How do you create email message that contains text and HTML version for the same content? Of course I would like to know how to setup the freemarker template or the header of the message that will be send. When I look on the source of message multi-part message in MIME format that I receive in inbox every once in while this is what is in there: This is a multi-part message in MIME format. ------=_NextPart_000_B10D_01CBAAA8.F29DB300 Content-Type: text/plain Content-Transfer-Encoding: 7bit ...Text here... ------=_NextPart_000_B10D_01CBAAA8.F29DB300 Content-Type: text/html; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable <html><body> html code here ... </body></html>

  Read the article

• PayPal - CreateRecurringPaymentsProfile - is this request valid?

  - by PHP thinker

  I sending this request to make a recurring paypent (SOAP request to SandBox), but in response I get error message about missing token and other fields invalid (Missing Token or payment source). What could be wrong with this CreateRecurringPaymentsProfile request? <?xml version="1.0" encoding="UTF-8"?> <SOAP-ENV:Envelope xmlns:xsi="http://www.w3.org/1999/XMLSchema-instance" xmlns:SOAP-ENC="http://schemas.xmlsoap.org/soap/encoding/" xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xsd="http://www.w3.org/1999/XMLSchema" SOAP-ENV:encodingStyle="http://schemas.xmlsoap.org/soap/encoding/"> <SOAP-ENV:Header> <RequesterCredentials xmlns="urn:ebay:api:PayPalAPI" SOAP-ENV:mustUnderstand="1"> <Credentials xmlns="urn:ebay:apis:eBLBaseComponents"> <Username>xxxxx_biz_api1.gmail.com</Username> <Password>xxxxxxx</Password> <Subject/> </Credentials> </RequesterCredentials> </SOAP-ENV:Header> <SOAP-ENV:Body> <CreateRecurringPaymentsProfileReq xmlns="urn:ebay:api:PayPalAPI"> <CreateRecurringPaymentsProfileRequest> <Version xmlns="urn:ebay:apis:eBLBaseComponents" xsi:type="xsd:string">58.0</Version> <CreateRecurringPaymentsProfileRequestDetails> <RecurringPaymentsProfileDetails xmlns="urn:ebay:apis:eBLBaseComponents"> <BillingStartDate></BillingStartDate> </RecurringPaymentsProfileDetails> <ScheduleDetails> <Description>Must match</Description> <PaymentPeriod> <BillingPeriod>Day</BillingPeriod> <BillingFrequency>1</BillingFrequency> <Amount>39.95</Amount> </PaymentPeriod> </ScheduleDetails> <Token>EC-480620864W522011V</Token> </CreateRecurringPaymentsProfileRequestDetails> </CreateRecurringPaymentsProfileRequest> </CreateRecurringPaymentsProfileReq> </SOAP-ENV:Body> P.S. I am sending this request the correct way, after "Doexpresscheckout" command.

  Read the article

< Previous Page | 56 57 58 59 60 61 62 63 64 65 66 67  | Next Page >