Search Results

Search found 2742 results on 110 pages for 'paypal gateway'.

Page 60/110 | < Previous Page | 56 57 58 59 60 61 62 63 64 65 66 67  | Next Page >

• Steps to diagnose SNU5600 disconnection problem

  - by Rich

  I have a Philips SNU5600 WiFi dongle plugged into two machines (ie I have two SNU5600 dongles, one in each machine). One machine is running 10.10 and the other is running Linux Mint. The dongles work absolutely fine, except if I do a lot of file transfers to a NAS attached to the wireless router. After a while the connection to the router will go. To get the connection back I either need to run sudo /etc/init.d/networking restart or I need to unplug and plug in again the dongle. Otherwise the dongle works fine (web browsing, streaming, etc). Output of lsusb: Bus 002 Device 003: ID 0471:1236 Philips (or NXP) SNU5600 802.11bg Output of lsusb -v at http://pastebin.com/dXYKkF01 What steps should I take next to resolve this? Is it a known problem? Could it be the router? It is a 3Com "OfficeConnect Wireless 11g Cable/DSL Gateway Version 1.02.15".

  Read the article

• why would Remmina stop working?

  - by Chris Curvey

  Until sometime last night, I had remmina working fine. I could run RDP through an SSH tunnel and all was well. Then it stopped working. I can get as far as the password dialog for my work machine, but then it just says "Cannot connect to RDP server localhost". I can't even find any logs that look interesting. I've re-installed remmina, cleared my .remmina directory, restarted my machine, and even restarted my gateway. Just to make it really weird, my laptop (which has the same setup -- latest Ubuntu and Remmina) can make the connection just fine. It is even going through the same router, albeit wirelessly. Any thoughts?

  Read the article

• Finally found a replacement for my.live.com&hellip;

  - by eddraper

  As I had alluded to before, the transition of http://my.live.com/ to http://my.msn.com/ caused me serious grief. I've been an RSS addict for many, many years and I found the my.live.com UI to be the ultimate RSS reader and gateway to the web. It had been my home page for a long time.  My.msn has a LONG way to go before it matches the elegance and performance of my.live. The site I ended up going with is http://www.netvibes.com/ .   It’s the closest thing I could find that could do four column tiles with a reasonable amount of information density .  I’d still prefer a lot less “chrome” and better use of space, but it’s as close as I’m going to get… One feature I really do like about netvibes, is the pagination feature.  The built in feed reader is also quite nice… All-in-all, I’d recommend netvibes…

  Read the article

• Enabling DHCP without being connected

  - by Joe Philllips

  I was installing Ubuntu server the other night and I was not able to hook up to the network while installing because I don't have a monitor for my desktop machines. I had to go into the living room and connect to the HDTV instead. This leaves me without network connectivity. When installing it asks how I would like to set up the network. I would like to enable DHCP but it tries to detect a gateway when I do this and obviously it doesn't find anything. It won't let me move on without setting up an IP manually at that point. Isn't there a way I can enable DHCP for the next time it boots up instead? Why the need for it right then and there?

  Read the article

• CodePlex Daily Summary for Saturday, December 25, 2010

  CodePlex Daily Summary for Saturday, December 25, 2010Popular ReleasesCosmos (C# Open Source Managed Operating System): Release 71246: This is the first release featuring VS2010 support. Express support (C#) should work as well. Release notes: http://www.gocosmos.org/Releases/71246/NoSimplerAccounting: NoSimplerAccounting 6.0: -Fixed a bug in expense category report.NHibernate Mapping Generator: NHibernate Mapping Generator 2.0: Added support for Postgres (Thanks to Angelo)NewLife XCode: XCode v6.5.2010.1223 ????（????v3.5??）: XCode v6.5.2010.1223 ????，??： NewLife.Core ??? NewLife.Net ??? XControl ??? XTemplate ????，??C#?????? XAgent ???? NewLife.CommonEnitty ??????（???，XCode??????） XCode?? ?????????，??????????????????，?????95% XCode v3.5.2009.0714 ??，?v3.5?v6.0???????????????，?????????。v3.5???????????，??????????????。 XCoder ??XTemplate?????????，????????XCode??? XCoder_Src ???????（????XTemplate????），??????????????????MiniTwitter: 1.64: MiniTwitter 1.64 ???? ?? 1.63 ??? URL ??????????????Ajax ASP.Net Forum: InSeCla Forum Software v0.1.9: *VERSION: 0.1.9* HAPPY CHRISTMAS FEATURES ADDED Added features customizabled per category level (Customize at ADMIN/Categories Tab) Allow Anonymous Threads, Allow Anonymous Post Virtual URLs (friendly urls) has finally added And you can have some forum (category) using virtual urls and other using normal urls. Check !, as this improve the SEO indexing results Moderation Instant On: Delete Thread, Move Thread Available to users being members of moderators or administrators InstantO...VivoSocial: VivoSocial 7.4.0: Please see changes: http://support.vivoware.com/project/ChangeLog.aspx?PROJID=48Umbraco CMS: Umbraco 4.6 Beta - codename JUNO: The Umbraco 4.6 beta (codename JUNO) release contains many new features focusing on an improved installation experience, a number of robust developer features, and contains more than 89 bug fixes since the 4.5.2 release. Improved installer experience Updated Starter Kits (Simple, Blog, Personal, Business) Beautiful, free, customizable skins included Skinning engine and Skin customization (see Skinning Documentation Kit) Default dashboards on install with hide option Updated Login t...SSH.NET Library: 2010.12.23: This release includes some bug fixes and few new fetures. Fixes Allow to retrieve big directory structures ssh-dss algorithm is fixed Populate sftp file attributes New Features Support for passhrase when private key is used Support added for diffie-hellman-group14-sha1,diffie-hellman-group-exchange-sha256 and diffie-hellman-group-exchange-sha1 key exchange algorithms Allow to provide multiple key files for authentication Add support for "keyboard-interactive" authentication method...ASP.NET MVC SiteMap provider: MvcSiteMapProvider 2.3.0: Using NuGet?MvcSiteMapProvider is also listed in the NuGet feed. Learn more... Like the project? Consider a donation!Donate via PayPal via PayPal. Release notesThis will be the last release targeting ASP.NET MVC 2 and .NET 3.5. MvcSiteMapProvider 3.0.0 will be targeting ASP.NET MVC 3 and .NET 4 Web.config setting skipAssemblyScanOn has been deprecated in favor of excludeAssembliesForScan and includeAssembliesForScan ISiteMapNodeUrlResolver is now completely responsible for generating th...SuperSocket, an extensible socket application framework: SuperSocket 1.3 beta 2: Compared with SuperSocket 1.3 beta 1, the changes listed below have been done in SuperSocket 1.3 beta 2: added supports for .NET 3.5 replaced Logging Application Block of EntLib with Log4Net improved the code about logging fixed a bug in QuickStart sample project added IPv6 supportTibiaPinger: TibiaPinger v1.0: TibiaPinger v1.0Media Companion: Media Companion 3.400: Extract the entire archive to a folder which has user access rights, eg desktop, documents etc. A manual is included to get you startedMulticore Task Framework: MTF 1.0.1: Release 1.0.1 of Multicore Task Framework.EnhSim: EnhSim 2.2.6 ALPHA: 2.2.6 ALPHAThis release supports WoW patch 4.03a at level 85 To use this release, you must have the Microsoft Visual C++ 2010 Redistributable Package installed. This can be downloaded from http://www.microsoft.com/downloads/en/details.aspx?FamilyID=A7B7A05E-6DE6-4D3A-A423-37BF0912DB84 To use the GUI you must have the .NET 4.0 Framework installed. This can be downloaded from http://www.microsoft.com/downloads/en/details.aspx?FamilyID=9cfb2d51-5ff4-4491-b0e5-b386f32c0992 - Fixing up some r...ASP.NET MVC Project Awesome (jQuery Ajax helpers): 1.4.3: Helpers (controls) that you can use to build highly responsive and interactive Ajax-enabled Web applications. These helpers include Autocomplete, AjaxDropdown, Lookup, Confirm Dialog, Popup Form, Popup and Pager new stuff: Improvements for confirm, popup, popup form RenderView controller extension the user experience for crud in live demo has been substantially improved + added search all the features are shown in the live demoGanttPlanner: GanttPlanner V1.0: GanttPlanner V1.0 include GanttPlanner.dll and also a Demo application.N2 CMS: 2.1 release candidate 3: * Web platform installer support available N2 is a lightweight CMS framework for ASP.NET. It helps you build great web sites that anyone can update. Major Changes Support for auto-implemented properties ({get;set;}, based on contribution by And Poulsen) A bunch of bugs were fixed File manager improvements (multiple file upload, resize images to fit) New image gallery Infinite scroll paging on news Content templates First time with N2? Try the demo site Download one of the templ...TweetSharp: TweetSharp v2.0.0.0 - Preview 6: Documentation for this release may be found at http://tweetsharp.codeplex.com/wikipage?title=UserGuide&referringTitle=Documentation. Note: This code is currently preview quality. Preview 6 ChangesMaintenance release with user reported fixes Preview 5 ChangesMaintenance release with user reported fixes Preview 4 ChangesReintroduced fluent interface support via satellite assembly Added entities support, entity segmentation, and ITweetable/ITweeter interfaces for client development Numer...Team Foundation Server Administration Tool: 2.1: TFS Administration Tool 2.1, is the first version of the TFS Administration Tool which is built on top of the Team Foundation Server 2010 object model. TFS Administration Tool 2.1 can be installed on machines that are running either Team Explorer 2010, or Team Foundation Server 2010.New ProjectsAzure Configuration File Comparer: Compares two Azure configuration files and highlights the differencesConquera: Conquera is a Xna fantasy turn-based strategy, where players capture castles and resources to expand, defend and improve their territories. eSCADA: Sistema de supervision, control y adquisicion de datos (SCADA) desarrollado sobre la plataforma .net 4.0Jing SaaS Platform: This SaaS Platform is built for fast form based project delivery.MatchChow: MatchChowMeshSharp: MeshSharp is a Navigational Mesh pathfinding library for XNA written in C#. This will use a combination of algorithms; A* (Astar), Funnel, Steering and Flocking. This will be a similar project to the recast navigation project (written in C++).MonJardin: MonJardin est une application pour le jardin. Cette application effectue l'inventaire des plantations et les récoltes d'un jardin.Open Bitrac: Open Bitrac is a asp.net blog system!PAMS: PAN Applications Management System for PAN Service Agents and AgenciesPassword Manager: Password Manager application for the Windows Phone, Desktop, ASP.NET/Silverlight platformsRandomRest: Creating a class library that is more random than the standard system.random by using crowd sourcingSimple Config Editor: A .Net Library to Create and Modify Config Files, Based on XML.SQL UML PROFILE: This project envolves the creation of an UML Profile for Visual Studio 2010 that allows creating database diagrams with UML objects in modeling projects. We will also create a T4 template to generate SQL Scripts from the modeling projectTSQL Parser based on Database Edition GDR: TSQL Parser based in Database Edition GDR, this particular implementation help in finding Tables and columns used in TSQL. For this project to work you will need to install Database Edition GDR. http://www.microsoft.com/downloads/en/details.aspx?FamilyID=bb3ad767-5f69-4db9-b1c9-8WiiScanner: A project for scanning objects into virtual environments using WiiMotes.Windows Azure Development Toys: The Windows Azure Development Toys is a collaboration of many libraries, interfaces, adapters and plug-ins for Windows Azure project development. It will accelerate your development performance of your Windows Azure based application.

  Read the article

• Help with Kodak esp 3250 printer driver on Lubuntu 12.1 SOLVED!

  - by user108608

  First my system: pentium 4 -don't remember the speed-, 1g ram, dual boot to separate physical drives, Fdos and Lubuntu 12.1 second my lan: I have four computers operating for the same printer. 1. Intel quad core i5, 4g ram, running Windoze 7 64 bit, printer connected and shared from here. Kodak ESP 3250 2. Gateway 17" laptop running Windoze 7 32bit 3. Asus tablet (small laptop) running Lumbutu 12.1 4. My dual boot system running Fdos and Lubuntu 12.1 The problem: I downloaded c2esp_25c-1_i386.deb, tried to install it using DEBI Package Installer, it loads the files, looks for cups driver and ends with an error: "Dependancy is not satisfiable: libcupsdriver1 (=1.4.0)" What do I do now? Is there some place that I can get the correct cups driver? further information: The Asus tablet was running Ubuntu 12.1 (very slowly and with a few crashes) and could print from the lan printer with no problems. Is there something in Ubuntu that can be loaded into Lubuntu? noobee user hoping for answers, Paul

  Read the article

• Why my site is not ranking for particular keyword

  - by user543087

  My site is only 3 days to be 6 months old. This website is unique, that is there is no competitor to this type site in India, providing comparison of payment gateways in India, besides the payment gateways companies itself. I've optimized it for key word : "payment gateway" I've changed the url's twice, latest being 3 months back, in which case Google Webmaster gave plently of 404's. I corrected the useful 404's and left meaningless ones as it is. What is the reason it's not ranking well for payment gateways? Even site with single page about "Payment gateways" seem to be ranking better than this. Is it does to: 1) Lot of outbound links to in-context companies and information 2) 404's as reported in Google Webmaster My another site is successfully getting 1500 unique visitors daily and is up in Google ranking. I don't know why it is not!

  Read the article

• Open source ASP.NET MVC project for a SaaS application

  - by DotnetDude

  I am working on a personal project that offers a service online. I'd like put this out to the public. I don't want to reinvent the wheel and use an existing template/open source project and add my service specific functionality. The features I am looking for are: Support for different roles (I need to have an admin role, customer and preferred customer roles) An admin section where admins can manage user accounts, login as with users credentials for providing support Customer pages that are role specific (Ex: Some functionality can be used by preferred customers but not non preferred ones) Preferably a pricing/plans page with payment gateway integration These are some of the basic pages available in most of service sites online. Is there a MVC 3 (preferably 4) written in C# that I can use as a shell to build upon? Thanks

  Read the article

• Connman not connecting to internet

  - by sagarchalise

  I wanted to try connman as I heard it will be replacing network manager. I kinda liked its looks and feel but the problem is I donot get connected to internet. I am using ADSL and it connects to my adsl router but doesnot ping google or any other sites. I tried to change the default gateway as well as use static ips but to no avail. It displays I am wired but doesnot open any sites or ping to any external sites except for 198.168.1.1 which is my router ip. Can anyone help ? Basically it is doing alright with network-manager as well as wicd

  Read the article

• What's the correct MAAS DHCP configuration?

  - by k to the z

  I've set up a MAAS controller by following this documentation: http://maas.ubuntu.com/docs1.4/cluster-configuration.html However, when I got to the DHCP configurations I was a little puzzled. The controller I created is at 172.16.142.61. It looks like that's the address for the "IP" text field. Going down the rest of the list I'm unsure of though. Should I just put in the subnet/broadcast/router (is that the gateway?) that the MAAS server resides in or am I suppost to just list the static address of the MAAS server and then define my own "virtual" subnet in the fields below?

  Read the article

• Domain Transfer Protection - need advice

  - by Jack

  Hey, I am about to purchase a domain name for a bit of money. I do not personally know the person who I am purchasing the domain name from, we have only chatted via email. The proposed process for the transfer is: The owner of the domain lowest the domain name security and emails me the domain password, I request the transfer After the request, I transfer the money via PayPal When the money has been cleared the current domain name owner confirms the transfer via the link that he receives in that email I wait for it to be transferred. The domain is currently registered with DirectNIC - http://www.directnic.com/ Is this the best practice? Seeing I am paying a bit of money for this domain name, I am worried that after the money has been cleared that I won't see the domain name or hear from the current domain name owner again. Is there a 'domain governing body' which I can report to if this is the case? Is the proposed transfer process the best solution? Any advice would be awesome. Thanks! Jack

  Read the article

• Access Control Service v2

  - by Your DisplayName here!

  A Resource-STS (others call it RP-STS or federation gateway) is a necessity for non-trivial federated identity scenarios. ADFS v2 does an excellent job in fulfilling that role – but (as of now) you have to run ADFS on-premise. The Azure Access Control Service is a Resource-STS in the cloud (with all the usual scalability/availability) promises. Unfortunately a lot of (the more interesting) features in ACS v1 had to be cut due to constrained time/resources. The good news is that ACS v2 is now in CTP and brings back a lot of the missing features (like WS* support) and adds some really sweet new ones (out of the box federation with Google, Facebook, LiveID – and OpenId in general). You can read about the details here. On a related note – ACS v2 works out of the box with StarterSTS – simply choose the ADFS v2 option and point the management portal to the StarterSTS WS-Federation metadata endpoint. Have fun ;)

  Read the article

• Issue with setting up multiple IP addresses on ubuntu server installation

  - by varunyellina

  I want to setup two ip addresses on my system for access through lan. This is my config on my other system. Desktop Installation My desktop installation runs with multiple IP's added through networkmanager both through lan and wifi. Server Installation On my server install I've edited /etc/network/interfaces to the following. auto eth0 auto eth0:1 # IP-1 iface eth0 inet static address 172.16.35.35 network 172.16.34.1 netmask 255.255.254.0 broadcast 172.166.35.255 dns-nameservers 172.16.100.221 8.8.8.8 # IP-2 iface eth0:1 inet static address 172.16.34.34 network 172.16.34.1 netmask 255.255.254.0 gateway 172.16.34.1 broadcast 172.16.35.255 After restarting through "/etc/init.d/networking restart" I recieve "Failed to bring up eth0:1" What am I doing wrong? Thankyou.

  Read the article

• setup dhcp server - "Job failed to start"

  - by jdicarreira

  I have an eth0 and eth1, eth0 has dynamic ip and on eth1 i setup static ip: auto lo iface lo inet loopback auto eth0 iface eth0 inet dhcp auto eth1 iface eth1 inet static address 10.10.0.1 netmask 255.0.0.0 gateway 10.10.0.1 ` and then i setup the "isc-dhcp-server" with the fowling command: INTERFACES="eth1" Finally... I went to this one "dhcpd.conf", with the fowling comand: default-lease-time 650; max-lease-time 79520; option subnet-mask 255.0.0.0; option broadcast-address 10.10.0.255; option routers 10.10.0.2; subnet 10.10.0.0 netmask 255.0.0.0 { range 10.10.0.10 10.10.0.250; } When I try to "sudo /etc/init.d/isc-dhcp-server start", I get "start: Job failed to start" Anyone knows whats wrong? :/

  Read the article

• PHP/MySQL Database application development tool

  - by RCH

  I am an amateur PHP coder, and have built a couple of dozen projects from scratch (including fairly simple e-commerce systems with user authentication, PayPal integration etc - all coded by hand from a clean page. Have also done a price comparison engine that takes data from multiple sites etc.). But I am no expert with OO and other such advanced techniques - I just have a fairly decent grasp of the basics of data processing, logic, functions and trying to optimize code as much as possible. I just want to make this clear so you have some idea of where I'm coming from. I have a couple of fairly large new projects on my plate for corporate clients - both require bespoke database-driven applications with complex relationships, many tables and lots of different front-end functions to manipulate that data for the internal staff in these companies. I figured building these systems from scratch would probably be a huge waste of time. Instead, there must be tools out there that will allow me to construct MySQL databases and build the pages with things like pagination, action buttons, table construction etc. Some kind of database abstraction layer, or system generator, if you will. What tool do you recommend for such a purpose for someone at my level? Open source would be great, but I don't mind paying for something decent as well. Thanks for any advice.

  Read the article

• Connecting to VPN / proxy with different port number

  - by user779159

  I have an IP address, port, username, and password for one of those VPN / proxy services that allows you to use an IP address other than what your ISP gives you, but in the 'Edit Connections VPN' GUI I don't see where to enter a port. I enter the IP address under 'Gateway' and the username and password where it asks for it, but it doesn't work. I try to enter it with the IP address ending with a colon, followed by the port, but that doesn't work either (e.g. "1.1.1.1:9999"). Any idea how I could make it work? I'm using Ubuntu 12.04 LTS. Thanks.

  Read the article

• How to forward blocked ports by ISP

  - by KiDo

  So I've been trying to setup a TeamSpeak 3 server on my pc but ports (9987,10011,30033) are blocked by my ISP, I've contacted them to unblock them but they didn't accept, and it's the fastest ISP in my city (as living in a 3rd world country) so it's not a good idea to connect to another ISP. The thing is, I've tried Your-Freedom to connect to tunnel my connection & SocksCap. The problem is, when TS works with SocksCap it doesn't show a WAN-IP that friends will use to connect to my server It says "Needs to be Requested" and when I press the Request button, I get nothing. So, any idea what's wrong if someone has done this before? or if you have any other suggestion to run a TS server, would be very glad to hear it and really appreciate that. P.S. as I've mentioned before, living in a 3rd world country, makes me unable to buy a VPS even the cheapest one cause there's no Visa, Credit, or paypal. so that won't work. Thanks in advance.

  Read the article

• How to keep background requests in sequence

  - by Jason Lewis

  I'm faced with implementing interfaces for some rather archaic systems, for handling online deposits to stored value accounts (think campus card accounts for students). Here's my dilemma: stage 1 of the process involves passing the user off to a thrid-party site for the credit card transaction, like old-school PayPal. Step two involves using a proprietary protocol for communicating with a legacy system for conducting the actual deposit. Step two requires that each transaction have a unique sequence number, and that the requests' seqnums are in order. Since we're logging each transaction in Postgres, my first thought was to take a number from a sequence in the DB, guaranteeing uniqueness. But since we're dealing with web requests that might come in near-simultaneously, and since latency with the return from the off-ste payment processor is beyond our control, there's always the chance for a race condition in the order of requests passed back to the proprietary system, and if the seqnums are out of order, the request fails silently (brilliant, right?). I thought about enqueuing the requests in Redis and using Resque workers to process them (single worker, single process, so they are processed in order), but we need to be able to give the user feedback as to whether the transaction was processed successfully, so this seems less feasible to me. I've tried to make this application handle concurrency well (as much as possible for a Ruby on Rails app), but now we're in a situation where we have to interact with a system that is designed to be single process, single threaded, and sequential. If it at least gave an "out of order" error, I could just increment (or take the next value off the sequence), but it's designed to fail silently in the event of ANY error. We are handling timeouts in a way that blocks on I/O, but since the application uses multiple workers (Unicorn), that's no guarantee. Any ideas/suggestions would be appreciated.

  Read the article

• Oracle Fusion Middleware 11g Release 1 Updates (2014/08/14)

  - by Hiro

  Oracle Fusion Middleware 11g Release 1 Media Pack ?????2014/08/14 ???????????????? 1. Oracle Identity Management Microsoft Windows (32-bit)????????????????????????????? Oracle API Gateway ???Linux x86, Linux x86-64, Microsoft Windows (32-bit), Microsoft Windows x64????????????????????????????????? Oracle Identity Manager Connectors 2. Oracle WebLogic Server on Oracle Database Appliance Linux x86, Linux x86-64, Microsoft Windows (32-bit), Microsoft Windows x64??????????????Oracle WebLogic Server on Oracle Database Appliance 2.9????????????? 3. ??? Oracle Fusion Middleware Repository Creation Utility 11g (11.1.1.7.0) Oracle WebCenter Interaction 10.3.3 ?????????????? Oracle Fusion Middleware Repository Creation Utility??????11.1.1.8.0??????????????? ???Oracle WebCenter Interaction??????My Oracle Support???(???????)?????????????????????? ?????

  Read the article

• Why dhclient is still running when I choose static IP?

  - by user276851

  I modify dhcp to static in /etc/network/interfaces (like below). # The primary network interface auto eth0 iface eth0 inet static netmask 255.255.0.0 address 10.10.130.128 gateway 10.10.1.1 Then restart the interface. $ sudo ifdown eth0; sudo ifup eth0 ... $ ifconfig eth0 Link encap:Ethernet inet addr:10.10.130.128 Bcast:10.10.255.255 Mask:255.255.0.0 So the new address kicks in. But DHCP is still there? $ ps aux | grep dhc root ... dhclient3 -e IF_METRIC=100 -pf /var/run/dhclient.eth0.pid -lf /var/lib/dhcp/dhclient.eth0.leases -1 eth0 Is that normal? If not, how to restart interface in static IP while stop DHCP at the same time? Thanks a lot.

  Read the article

• Suggestions for a Self-serv advertising service

  - by Mystere Man

  I am seeking a self-serv advertising service for my websites, but I have a few restrictions that seem to make what i'm looking for hard to find. Specifically, I want to place "advertise here" links on my pages and allow end-users to purchase advertising on that site, page, and location. These ads will not be part of a national network. Supports multi-tenancy - That is, I have a number of domains using the same "web application" but with customized content per domain. When a customer wants to advertise on a given domain, then the ads will only appear on that domain and on that page of the domain (even though the page name may be the same across multiple domains). Supports fixed ad prices, not just CPC. I need monthly and quarterly pricing regardless of performance. Integrates with OpenX and other ad networks, so that if there is no self-serv on a given zone, it will use national advertising or direct advertising. Shiny Ads has much of this, but i'm looking for alternatives, as their prices are a bit crazy (20%) and can only do PayPal.

  Read the article

• ifconfig not showing all IPs bound to the machine

  - by pankaj sharma

  I have configured multiple IP addresses on a ubuntu box, but when I run ifconfig it shows just one of them. I am able, however, to ping all other adresses assigned to this machine. /etc/network/interface contents: # This file describes the network interfaces available on your system # and how to activate them. For more information, see interfaces(5). # The loopback network interface auto lo iface lo inet loopback # The primary network interface auto eth0 iface eth0 inet static address 192.168.202.11 netmask 255.255.255.0 network 192.168.202.0 broadcast 192.168.202.255 gateway 192.168.202.1 # dns-* options are implemented by the resolvconf package, if installed dns-search idil.dz1.da auto eth0:1 iface eth0:1 inet static address 192.168.202.12 netmask 255.255.255.0 auto eth0:2 iface eth0:2 inet static address 192.168.202.13 netmask 255.255.255.0 auto eth0:3 iface eth0:3 inet static address 192.168.202.14 netmask 255.255.255.0 auto eth0:4 iface eth0:4 inet static address 192.168.202.15 netmask 255.255.255.0 auto eth0:5 iface eth0:5 inet static address 192.168.202.16 netmask 255.255.255.0 but the output of the ifconfig is only: 192.168.202.11

  Read the article

• Server 2012R2 – PowerShell Web Access

  - by Waclaw Chrabaszcz

  Originally posted on: http://geekswithblogs.net/Wchrabaszcz/archive/2014/05/17/server-2012r2--powershell-web-access.aspxHaha … Sometimes I'm joking that there is nothing worse than Linux fanboi imprisoned in Windows engineer's body. Maybe someday I will start blogging about my noob's experiences. However let's stick to the point. Sometimes the easiest solutions are the best. After couple of tries how to reach left pocket using right hand I'm going to follow easy path. Today's plan is very easy, I'm going to take advantage of Server 2012 and install Web gateway to PowerShell console. After that I would be able execute PoSH from any device including Linux. Install-WindowsFeature –Name WindowsPowerShellWebAccess –IncludeManagementToolsInstall-PswaWebApplication –UseTestCertificateAdd-PswaAuthorizationRule –UserName * -ComputerName * -ConfigurationName *  Let's test it …

  Read the article

• How can I set my linux box as a router to forward ip packets?

  - by UniMouS

  I am doing a network experiment about ip packet forwarding, but I don't know why it does work. I have a linux machine with two network interfaces, eth0 and eth1 both with static IP address (eth0: 192.168.100.1, eth1: 192.168.101.2). My goal is simple, I just want to forward ip packets from eth1 with destination in subnet 192.168.100.0/24 to eth0, and forward ip packets from eth0 with destination in subnet 192.168.101.0/24 to eth1. I turned on ip forwarding with: sysctl -w net.ipv4.ip_forward=1 my routing table is like this: # route -n Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 192.168.100.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0 192.168.101.0 0.0.0.0 255.255.255.0 U 0 0 0 eth1 But, when I try to ping from 192.168.100.25 to 192.168.101.47, it does not work.

  Read the article

• Self-serv advertising service

  - by Mystere Man

  I am seeking a self-serv advertising service for my websites, but I have a few restrictions that seem to make what i'm looking for hard to find. Specifically, I want to place "advertise here" links on my pages and allow end-users to purchase advertising on that site, page, and location. These ads will not be part of a national network. Supports multi-tenancy - That is, I have a number of domains using the same "web application" but with customized content per domain. When a customer wants to advertise on a given domain, then the ads will only appear on that domain and on that page of the domain (even though the page name may be the same across multiple domains). Supports fixed ad prices, not just CPC. I need monthly and quarterly pricing regardless of performance. Integrates with OpenX and other ad networks, so that if there is no self-serv on a given zone, it will use national advertising or direct advertising. Shiny Ads has much of this, but i'm looking for alternatives, as their prices are a bit crazy (20%) and can only do PayPal.

  Read the article

< Previous Page | 56 57 58 59 60 61 62 63 64 65 66 67  | Next Page >