Search Results

Search found 23271 results on 931 pages for 'static classes'.

Page 60/931 | < Previous Page | 56 57 58 59 60 61 62 63 64 65 66 67  | Next Page >

• multiple ip for a server not reachable

  - by andrewk

  FYI: I've read everything on Serverfault related to this question and have faced a different issue. Simply put, I've got one server (apache2) with couple of sites on it. It currently has 1 ip. I'm trying to assign/add another ip to that server, so I can give each site a different ip for ssl purposes. I am not lucking out. The new ip simply is unreachable, I've pinged it. This is what I've got below, what am I doing wrong. auto lo iface lo inet loopback auto eth0 eth0:0 eth0:1 iface eth0 inet static address 70.116.5.244 netmask 255.255.255.0 gateway 70.116.5.1 #THE NEW IP iface eth0:0 inet static address 26.175.217.102 netmask 255.255.255.0 #PRIVATE IP iface eth0:1 inet static address 192.168.158.88 netmask 255.255.128.0 NOTE: THESE IP'S ARE TWEAKED BUT RELATIVE I've read many questions here 90% similar to this but most actually have the IP respond, not this case. Thanks netstar -r output Kernel IP routing table Destination Gateway Genmask Flags MSS Window irtt Iface default gw-u6.linode.co 0.0.0.0 UG 0 0 0 eth0 70.116.5.0 * 255.255.255.0 U 0 0 0 eth0 26.175.217.0 * 255.255.255.0 U 0 0 0 eth0 192.168.128.0 * 255.255.128.0 U 0 0 0 eth0

  Read the article

• Can not change to a static IP in Fedora 19

  - by user196272

  Im having a bit of a weird situation. Ive installed Fedora Linux 19 onto a virtual machine with no GUI. initially eth0 does not show up when I perform ifconfig. when I run dmesg | grep eth I see the adapter but it says it changed names to p2p1. Once I perform the ifconfig p2p1 up command it shows up. Now when I try to edit the /etc/sysconfig/network-scripts/ifcfg-p2p1, it does not exist. the only scripts that are there lo and enp0s3. If I try to create the ifcfg-p2p1 file with the correct settings, I can not restart the network service. I tried editing the enp0s3 file, but that did not work. Im fairly new to linux and not sure what else to put in here, so if you need any more information just let me know and Ill put it in here.

  Read the article

• nginx: try_files not finding static files, falling back to PHP

  - by Wells Oliver

  Relevant configuration: location /myapp { root /home/me/myapp/www; try_files $uri $uri/ /myapp/index.php?url=$uri&$args; location ~ \.php { fastcgi_pass 127.0.0.1:9000; fastcgi_index index.php; include /etc/nginx/fastcgi_params; fastcgi_param SCRIPT_FILENAME $document_root/index.php; } } I absolutely have a file foo.html in /home/me/myapp/www but when I browse to /myapp/foo.html it is handled by PHP, the final fallback in the try_files list. Why is this happening?

  Read the article

• Eclipse on Ubuntu: Rectangles instead of Strings and some Java methods and classes

  - by Claus Hausberger

  after upgrading from Ubuntu 9.04. to 11.04 (new installation), I have weird problems with the Eclipse editor. With the Eclipse PyDev plugin, whenever I typ single quoted strings like 'bla', they appear as rectangles (both the quotes as well as the string). First I thought this was a problem with the PyDev plugin, but it also happens with Java and Scala Plugins. With Java, it happens, for example, when typing System.out.println("bla") and then "out" is shown as rectangles only. Weird is that for about half a second I see "System.out.println" and then the editor changes it to System.[][][].println (not really [] (here I used two brackets), it is shown as rectangles). This is very weird. I've never had this before with any Ubuntu, Java or Eclipse version. Currently, I use: Ubuntu 11.04. Eclipse 3.6 Java 1.6.0_25 The latest plugins for Python (2.1) and Scala (beta 5) where used. Eclipse and Ubuntu Terminal is set to UTF-8. The problem also happens when using KDE instead of Gnome. I doubt is has anything to do with Java as I use the same versions on older Ubuntu installations (10.04, 9.10, etc) at work. It does not happen with Netbeans. But I saw once error dialog message from the Update Manager where there were some rectangles in the error widget. Maybe this is the same problem Any ideas what could be wrong here and how to fix this? Eclipse is unusable but I need this for work and also for Scala and Python (the Eclipse plugins for those are very good now). Claus

  Read the article

• New Static Website with Hosted DNS alternating 502, 503 and Page Does Not Exist Errors

  - by Dave

  This has become an increasingly frustrating ordeal. I'm mostly a web developer, so forgive me if I am using improper terminology here. I have a client that had purchased a domain at JustHost. We built him a website and have it on our own server space. Now, I'm mostly used to dealing with godaddy and it is simple enough to manage dns records and point the A record to our server IP, where Apache on our end deals with the domains via name-based virtual hosts. But for some reason, in setting this up with JustHost, when attempting to go to the domain name, I either get a 502 or 503 error or "webpage does not exist". Now, I know that the basic functionality of the webpage must be working because I can access the the index etc straight through my servers www data (IE [server-ip]/website_folder). I was on the phone with technical support for over three hours yesterday with justhost and the best I could get was "That's really weird..." I've checked my logs and there doesn't seem to be anything coming through to my end. Does anybody have an idea of whats going on here? I would love for it to be a problem on my end, because justhost doesn't seem capable of helping further. Any help is greatly appreciated, thanks. I forgot to mention that we have several other sites up and running and completely accessible.

  Read the article

• Hiera + Puppet classes

  - by Amadan

  I'm trying to figure out Puppet (3.0) and how it relates to built-in Hiera. So this is what I tried, an extremely simple example (I'll make a more complex hierarchy when I manage to get the simple one working): # /etc/puppet/hiera.yaml :backends: - yaml :hierarchy: - common :yaml: :datadir: /etc/puppet/hieradata # /etc/puppet/hieradata/common.yaml test::param: value # /etc/puppet/modules/test/manifests/init.pp class test ($param) { notice($param) } # /etc/puppet/manifests/site.pp include test If I directly apply it, it's fine: $ puppet apply /etc/puppet/manifests/site.pp Scope(Class[Test]): value If I go through puppet master, it's not fine: $ puppet agent --test Could not retrieve catalog from remote server: Error 400 on SERVER: Must pass param to Class[Test] at /etc/puppet/manifests/site.pp:1 on node <nodename> What am I missing? EDIT: I just left the office but a thought struck me: I should probably restart puppet master so it can see the new hiera.conf. I'll try that on Monday; in the meantime, if anyone figures out some not-it problem, I'd appreciate it :)

  Read the article

• Is there an way to get the top level classes included in a puppet node?

  - by pwan

  Is there an easy way to return the top level classes applied to a node. By this I mean the classes included in a node definition or ENC equivalent For example with the sample node below, I'd like to return 'return::me' and 'return::me2' for somehost, but not 'dontreturn::me' class return::me { include dontreturn::me } node "somehost" { include return::me include return::me2 } I see that /var/lib/puppet/state/classes.txt includes the full list of classes applied to the node, but that includes any additional classes included by to the top level classes. Is there some way to get at this data with a puppet faces command ? I suspect 'puppet nodes' might be useful, but I haven't been able to get it return what I what.

  Read the article

• Caching static content from Adobe, Microsoft, etc

  - by Tim

  I'm currently running the Apple SUS on a Mac OS X Server in a small office environment. It works well for Apple updates, but I'm still stuck with either manually downloading and installing Adobe/Microsoft updates on each computer or running them through a Squid cache, with the blind faith that Squid will keep the files I actually want to stay cached. What is the best way to cache updates locally for applications like the Adobe Updater or Microsoft AutoUpdate? Ideally cached in such a way that I can tell which files I do or do not have cached. It would also be nice to be able to cache things for other software like Firefox and Sparkle-enabled apps, but these are usually small enough to ignore.

  Read the article

• Configure iptables with a bridge and static IPs

  - by Andrew Koester

  I have my server set up with several public IP addresses, with a network configuration as follows (with example IPs): eth0 \- br0 - 1.1.1.2 |- [VM 1's eth0] | |- 1.1.1.3 | \- 1.1.1.4 \- [VM 2's eth0] \- 1.1.1.5 My question is, how do I set up iptables with different rules for the actual physical server as well as the VMs? I don't mind having the VMs doing their own iptables, but I'd like br0 to have a different set of rules. Right now I can only let everything through, which is not the desired behavior (as br0 is exposed). Thanks!

  Read the article

• Wrap app with dynamic libraries into one large static app

  - by progo

  I have an old program that kind of depends on older dynamic libraries. They tend to get upgraded easily with distro's updates. I figured that there would be a script with using ldd that would gather the libs needed and create one bigger, statically linked application that wouldn't break so easily. If I could do this, alot of older KDE libraries could be removed from my system and easen my life. Thanks!

  Read the article

• 404 with serving static files in a custom nginx configuration

  - by code90

  In my nginx configuration, I have the following: location /admin/ { alias /usr/share/php/wtlib_4/apps/admin/; location ~* .*\.php$ { try_files $uri $uri/ @php_admin; } location ~* \.(js|css|png|jpg|jpeg|gif|ico|pdf|zip|rar|air)$ { expires 7d; access_log off; } } location ~ ^/admin/modules/([^/]+)(.*\.(html|js|json|css|png|jpg|jpeg|gif|ico|pdf|zip|rar|air))$ { alias /usr/share/php/wtlib_4/modules/$1/admin/$2; } location ~ ^/admin/modules/([^/]+)(.*)$ { try_files $uri @php_admin_modules; } location @php_admin { if ($fastcgi_script_name ~ /admin(/.*\.php)$) { set $valid_fastcgi_script_name $1; } fastcgi_pass $byr_pass; fastcgi_index index.php; fastcgi_param SCRIPT_FILENAME /usr/share/php/wtlib_4/apps/admin$valid_fastcgi_script_name; fastcgi_param REDIRECT_STATUS 200; include /etc/nginx/fastcgi_params; } location @php_admin_modules { if ($fastcgi_script_name ~ /admin/modules/([^/]+)(.*)$) { set $byr_module $1; set $byr_rest $2; } fastcgi_pass $byr_pass; fastcgi_index index.php; fastcgi_param SCRIPT_FILENAME /usr/share/php/wtlib_4/modules/$byr_module/admin$byr_rest; fastcgi_param REDIRECT_STATUS 200; include /etc/nginx/fastcgi_params; } Following is the requested url which ends up with "404": http://www.{domainname}.com/admin/modules/cms/styles/cms.css Following is the error log: [error] 19551#0: *28 open() "/usr/share/php/wtlib_4/apps/admin/modules/cms/styles/cms.css" failed (2: No such file or directory), client: xxx.xxx.xxx.xxx, server: {domainname}.com, request: "GET /admin/modules/cms/styles/cms.css HTTP/1.1", host: "www.{domainname}.com" Following urls works fine: http://www.{domainname}.com/admin/modules/store/?a=manage http://www.{domainname}.com/admin/modules/cms/?a=cms.load Can anyone see what the problem could be? Thanks. PS. I am trying to migrate existing sites from apache to nginx.

  Read the article

• Could not use domain name instead of static IP

  - by Nam Gi VU

  Hi, I'm working with some partners in the UK. My office is in Vietnam. We are having a network problem: My partner can access an internal website using the domain name, e.g. http://website.name, but I can only access that website using the direct IP, e.g. 192.168.1.85. I can not ping that web server using "ping website.name" but it works if I using "ping 192.168.1.85". I want to use the domain name. Please help.

  Read the article

• Set up Ubuntu in Virtualbox to have static ip

  - by Don H

  I frequently work in different locations, and need to have a virtualbox version of Ubuntu server running locally. While I was at home getting it set up, I was able to ssh into the server using the locally allocated IP address. However, now that I'm elsewhere, ifconfig is still showing the old 10.0.x.x ip address, but instead of being in the 10.0.x.x space, my laptop's ip starts with 192.168.x.x With that in mind, if there a straightforward way to set up the virtual box Ubuntu server in such a way that I can just connect using "ssh servername" regardless of it's ip address?

  Read the article

• Static DHCP binding

  - by Alex

  Good time of day, SF people. I have created a manual DHCP binding entry on a Cisco router so that a client would always get leased to it. The clients wants to get the same address on both of his dual-boot linux systems. He tries to get an IP address leased and he succeeds on one of the dual-boot operating systems. When he reboots to another one he gets a lease for a completely different one. I don't get it. The MAC addresses are the same (we checked in ifconfig, so what could be happening here? Why is the router confused? Or is it something else? Also, how can I check DHCP server IP address who I have got an IP address from (on Linux)? Configuration on Cisco: ip dhcp pool MANUAL_BINDING0001 host 192.168.0.64 255.255.255.0 hardware-address dead.beef.1337 dns-server 192.168.8.11 default-router 192.168.0.254 domain-name verynicedomainigothere.cn PS. Is it mandatory to use client-name configuration line?

  Read the article

• Excluding four IP's from a /32 static route

  - by Justin

  I have a Cisco ASA routing a /32 of public addresses (non RFC-1812) through a private link. When the device sees the destination address it selects the private route instead of going out over the public network. This works great but I am now trying to exclude 4 IP's from the private route. Traffic to these addresses should go over the public internet instead of being routed over the private network. Can I just add anothe route for these four IP's or do I have to modify the existing route for the /32?

  Read the article

• how to block static ads

  - by Nrew

  Is it possible to block ads that are not flash based. The ads that show up whenever you have flash block or ad blocker installed on your browser.

  Read the article

• Puppet inheritance of parametrized classes

  - by paweloque

  I have a situation in puppet where I want to inherit from a parametrized class: class base ($basepath) { ... } class extends_base ($ext_param) inherits base { ... } Now trying to instantiate the extends_base class I get the following error message: Must pass basepath to Class[Base] However, I don't see a way how to pass the basepath parameter to the Base class.. I tried to pass the param in the Class[Extends_base] definition, puppet doesn't like this either.

  Read the article

• Generating Java classes out of XMLSchema.xsd using JAXB

  - by Christian Schulz

  I'm using jaxb to generate java classes out of a xml schema. The schema imports XMLSchema.xsd and its content is used as an element in the document. If I remove the import and the reference to "xsd:schema" respectively then the binding compiler generates successfully the classes. If I do not then it would produce the following errors, which are the same if I would try to generate Java classes from the XMLSchema.xsd only! C:\Users\me"%JAXB%/xjc" -extension -d tmp/uisocketdesc -p uis.jaxb uisocketdesc.xsd -b xml_binding_test.xml -b xml_binding_test_2.xml -b xml_binding_test_3.xml parsing a schema... compiling a schema... [ERROR] A class/interface with the same name "uis.jaxb.ComplexType" is already in use. Use a class customization to resolve this conflict. line 612 of "http://www.w3.org/2001/XMLSchema.xsd" [ERROR] (Relevant to above error) another "ComplexType" is generated from here. line 440 of "http://www.w3.org/2001/XMLSchema.xsd" [ERROR] A class/interface with the same name "uis.jaxb.Attribute" is already in use. Use a class customization to resolve this conflict. line 364 of "http://www.w3.org/2001/XMLSchema.xsd" [ERROR] (Relevant to above error) another "Attribute" is generated from here. line 1020 of "http://www.w3.org/2001/XMLSchema.xsd" [ERROR] A class/interface with the same name "uis.jaxb.SimpleType" is already in use. Use a class customization to resolve this conflict. line 2278 of "http://www.w3.org/2001/XMLSchema.xsd" [ERROR] (Relevant to above error) another "SimpleType" is generated from here. line 2222 of "http://www.w3.org/2001/XMLSchema.xsd" [ERROR] A class/interface with the same name "uis.jaxb.Group" is already in use. Use a class customization to resolve this conflict. line 930 of "http://www.w3.org/2001/XMLSchema.xsd" [ERROR] (Relevant to above error) another "Group" is generated from here. line 727 of "http://www.w3.org/2001/XMLSchema.xsd" [ERROR] A class/interface with the same name "uis.jaxb.AttributeGroup" is already in use. Use a class customization to resolve this conflict. line 1062 of "http://www.w3.org/2001/XMLSchema.xsd" [ERROR] (Relevant to above error) another "AttributeGroup" is generated from here. line 1026 of "http://www.w3.org/2001/XMLSchema.xsd" [ERROR] A class/interface with the same name "uis.jaxb.Element" is already in use. Use a class customization to resolve this conflict. line 721 of "http://www.w3.org/2001/XMLSchema.xsd" [ERROR] (Relevant to above error) another "Element" is generated from here. line 647 of "http://www.w3.org/2001/XMLSchema.xsd" [ERROR] Two declarations cause a collision in the ObjectFactory class. line 1020 of "http://www.w3.org/2001/XMLSchema.xsd" [ERROR] (Related to above error) This is the other declaration. line 364 of "http://www.w3.org/2001/XMLSchema.xsd" [ERROR] Two declarations cause a collision in the ObjectFactory class. line 2278 of "http://www.w3.org/2001/XMLSchema.xsd" [ERROR] (Related to above error) This is the other declaration. line 2222 of "http://www.w3.org/2001/XMLSchema.xsd" [ERROR] Two declarations cause a collision in the ObjectFactory class. line 930 of "http://www.w3.org/2001/XMLSchema.xsd" [ERROR] (Related to above error) This is the other declaration. line 727 of "http://www.w3.org/2001/XMLSchema.xsd" [ERROR] Two declarations cause a collision in the ObjectFactory class. line 440 of "http://www.w3.org/2001/XMLSchema.xsd" [ERROR] (Related to above error) This is the other declaration. line 612 of "http://www.w3.org/2001/XMLSchema.xsd" [ERROR] Two declarations cause a collision in the ObjectFactory class. line 1026 of "http://www.w3.org/2001/XMLSchema.xsd" [ERROR] (Related to above error) This is the other declaration. line 1062 of "http://www.w3.org/2001/XMLSchema.xsd" [ERROR] Two declarations cause a collision in the ObjectFactory class. line 647 of "http://www.w3.org/2001/XMLSchema.xsd" [ERROR] (Related to above error) This is the other declaration. line 721 of "http://www.w3.org/2001/XMLSchema.xsd" Failed to produce code.

  Read the article

• Contructor parameters for dependent classes with Unity Framework

  - by Onisemus

  I just started using the Unity Application Block to try to decouple my classes and make it easier for unit testing. I ran into a problem though that I'm not sure how to get around. Looked through the documentation and did some Googling but I'm coming up dry. Here's the situation: I have a facade-type class which is a chat bot. It is a singleton class which handles all sort of secondary classes and provides a central place to launch and configure the bot. I also have a class called AccessManager which, well, manages access to bot commands and resources. Boiled down to the essence, I have the classes set up like so. public class Bot { public string Owner { get; private set; } public string WorkingDirectory { get; private set; } private IAccessManager AccessManager; private Bot() { // do some setup // LoadConfig sets the Owner & WorkingDirectory variables LoadConfig(); // init the access mmanager AccessManager = new MyAccessManager(this); } public static Bot Instance() { // singleton code } ... } And the AccessManager class: public class MyAccessManager : IAccessManager { private Bot botReference; public MyAccesManager(Bot botReference) { this.botReference = botReference; SetOwnerAccess(botReference.Owner); } private void LoadConfig() { string configPath = Path.Combine( botReference.WorkingDirectory, "access.config"); // do stuff to read from config file } ... } I would like to change this design to use the Unity Application Block. I'd like to use Unity to generate the Bot singleton and to load the AccessManager interface in some sort of bootstrapping method that runs before anything else does. public static void BootStrapSystem() { IUnityContainer container = new UnityContainer(); // create new bot instance Bot newBot = Bot.Instance(); // register bot instance container.RegisterInstance<Bot>(newBot); // register access manager container.RegisterType<IAccessManager,MyAccessManager>(newBot); } And when I want to get a reference to the Access Manager inside the Bot constructor I can just do: IAcessManager accessManager = container.Resolve<IAccessManager>(); And elsewhere in the system to get a reference to the Bot singleton: // do this Bot botInstance = container.Resolve<Bot>(); // instead of this Bot botInstance = Bot.Instance(); The problem is the method BootStrapSystem() is going to blow up. When I create a bot instance it's going to try to resolve IAccessManager but won't be able to because I haven't registered the types yet (that's the next line). But I can't move the registration in front of the Bot creation because as part of the registration I need to pass the Bot as a parameter! Circular dependencies!! Gah!!! This indicates to me I have a flaw in the way I have this structured. But how do I fix it? Help!!

  Read the article

• Serving static content from cookie less domain and mod_deflate

  - by Saif Bechan

  I have two domain. One domain with my main website and the other with js/css/etc.. files, static content. mod_deflate is enabled for both domains, but when i run ySlow in FireFox it says none of my static content is compressed. When i bring back the js or css file to my normal domain it gets compressed right. Only when its served from the other domain is it not compressed. Do i have to do some more configuration for this to work? I am using this line in my .htaccess file AddOutputFilterByType DEFLATE application/x-javascript text/css text/html text/xml text/plain application/x-httpd-php I tried to but the line in my httpd.conf file but it gives me the same results. PS. If this is more of a serverfault question i am sorry for this. But i see a lot of questions here concerning mod_deflate and ySlow

  Read the article

• iPhone: Using static library in an application crashes the device but not the iphone simulator

  - by spin-docta

  I have a library I made, and now I want to utilize it in an application. I've believe I've properly linked to the library. Here are all the things I've done: Set the header search path Set other linker flags to "-ObjC" Added the static library xcode project Made sure the lib.a was listed as a framework target Added the library as a direct dependency Like I said in the title, I've successfully run the app with the static library in the simulator. Once I try testing the app using the device, it crashes the second it has to use a function from the library: *** Terminating app due to uncaught exception 'NSInvalidArgumentException', reason: '*** +[NSDate firstOfCurrentMonth]: unrecognized selector sent to class 0x3841bb44' 2009-10-10 12:45:31.159 Basement[2372:207] Stack:

  Read the article

• What's the convention for extending Linq with set based helper operations

  - by Luke Rohde

  Hi All I might be vaguing out here but I'm looking for a nice place to put set based helper operations in linq so I can do things like; db.Selections.ClearTemporary() which does something like db.DeleteAllOnSubmit(db.Selections.Where(s => s.Temporary)) Since I can figure out how to extend Table<Selection> the best I can do is create a static method in partial class of Selection (similar to Ruby) but I have to pass in the datacontext like; Selection.ClearTemporary(MyDataContext) This kind of sucks because I have two conventions for doing set based operations and I have to pass the data context to the static class. I've seen other people recommending piling helper methods into a partial of the datacontext like; myDataContext.ClearTemporarySelections(); But I feel this makes the dc a dumping ground for in-cohesive operations. Surely I'm missing something. I hope so. What's the convention? TIA

  Read the article

• Why callback functions needs to be static when declared in class

  - by Dave17

  I was trying to declare a callback function in class and then somewhere i read the function needs to be static but It didn't explain why? #include <iostream> using std::cout; using std::endl; class Test { public: Test() {} void my_func(void (*f)()) { cout << "In My Function" << endl; f(); //Invoke callback function } static void callback_func() {cout << "In Callback function" << endl;} }; int main() { Test Obj; Obj.my_func(t.callback_func); }

  Read the article

• What's the convention for extending Linq datacontext with set based helper operations specific to on

  - by Luke Rohde

  Hi All I might be vaguing out here but I'm looking for a nice place to put set based helper operations in linq so I can do things like; db.Selections.ClearTemporary() which does something like db.DeleteAllOnSubmit(db.Selections.Where(s => s.Temporary)) Since I can figure out how to extend Table<Selection> the best I can do is create a static method in partial class of Selection (similar to Ruby) but I have to pass in the datacontext like; Selection.ClearTemporary(MyDataContext) This kind of sucks because I have two conventions for doing set based operations and I have to pass the data context to the static class. I've seen other people recommending piling helper methods into a partial of the datacontext like; myDataContext.ClearTemporarySelections(); But I feel this makes the dc a dumping ground for in-cohesive operations. Surely I'm missing something. I hope so. What's the convention? TIA

  Read the article

• knockout.js bind to static data

  - by MatteS

  whats the suggested way to bind to existing static data? I have to include this in the viewmodel because its used in computed values. http://jsfiddle.net/z2ykC/4/ <div id="sum" data-bind="text: sum"> </div> <div class="line"> dynamic: <span data-bind="text: dynamicValue"></span> static: <span data-bind="text: staticValue">312</span> <button data-bind="click: getDataFromServer">get data</button> </div> <div class="line"> dynamic: <span data-bind="text: dynamicValue"></span> static: <span data-bind="text: staticValue">123</span> <button data-bind="click: getDataFromServer">get data</button> </div> ? function SumViewModel(lines){ this.sum = ko.computed(function(){ var value = 0; $.each(lines, function(index, element){ var staticValue = element.staticValue(); if (staticValue) value += staticValue; var dynamicValue = element.dynamicValue(); if (dynamicValue) value += dynamicValue; value += dynamicValue; }); return value; }); } function LineViewModel() { this.randomNumber = function(max) { return Math.floor((Math.random() * max) + 1); }; this.dynamicValue = ko.observable(0); this.staticValue = ko.observable(); this.getDataFromServer = function() { this.dynamicValue(this.randomNumber(300)); }; }; var lines = []; $('.line').each(function(index, element) { var line = new LineViewModel() //line.staticValue(parseInt($('[data-bind*="staticValue"]', element).text())); lines.push(line); ko.applyBindings(line, element); }); var sum = new SumViewModel(lines); ko.applyBindings(sum, $('#sum')[0]);

  Read the article

< Previous Page | 56 57 58 59 60 61 62 63 64 65 66 67  | Next Page >