Search Results

Search found 5789 results on 232 pages for 'tuner card'.

Page 60/232 | < Previous Page | 56 57 58 59 60 61 62 63 64 65 66 67  | Next Page >

• Windows 7: from Geforce 8800 to three monitors?

  - by lance

  I've got a GeForce 8800 that I've quite happy with. It drives my two 23" widescreen displays well. Now I've got a 19" standard display that I want to stick between the two widescreens. My second PCIe 16x slot is unused (as is the PCI slot below that), and I want to add a card to my Win7 x64 system. This 19" display won't be used for gaming, so I don't need anything fancy. Here are two cards I was considering, but I'm wondering if they're bad choices for some reason? If they're both fine choices, which is better and why? Again, I'm needing to power only the 19" standard display with this card, and it won't play games. I just need 1280x1024 in Win7 x64. NVidia: Galaxy 95TFE8HUFEXX GeForce 9500 GT Video Card - 512MB DDR2, PCI Express 2.0 ATI: ASUS EAH4350 SILENT/DI/51 Radeon HD 4350 Video Card - 512MB DDR2, PCI Express 2.0

  Read the article

• Failover Internet connection?

  - by ez_brian0

  Hi In my Linux server i have three network cards. The eth0 card is connected to ISP1, the eth1 card is connected to LAN and the eth3 card is connected to ISP2. What i want to do is to automatically use eth3 as Internet connection if the eth0 connection fails. How can this be done? Another problem is that my firewall is referring to eth0 as the server is doing NAT for clients this would be broken if eth3 is taken in use, how can this be solved?

  Read the article

• Run 3 monitors on two different video cards?

  - by hullot

  Can I run 3 monitors on two different video cards? I have an ATI and Nvidia brand card. The ATI has 2 HDMI connections. They both work. Both cards are also picked up in Windows, one being the ATI and the other one as the Nvidia, but it says VGA Controller, although the card only takes 2 DVi. So, one DVI cable goes into that Nvidia card. 3 Monitors, but only 2 the HDMI ones from the ATI pick up, not the third one which is connected to the Nvidia via DVI. How can I run three monitors then? I suppose I can't install both drivers, so I'm unsure what to do. Is this possible? I just want the Nvidia card to power the third screen, no gaming on it, nothing. Also the ATI is picked up as primary card as well, so no hurdle there. EDIT: Hm, just installed the Nvidia drivers and it picked up the third screen no problem. Hope there aren't any major conflicts. Will post this as an answer as correct when I'm able. Can't as a new user.

  Read the article

• Windows 7 Taskbar Icons Randomly Disappearing

  - by Ryker

  This is a problem that i'm totally stumped on. Taskbar Icons that are pinned, as well as open program thumbs keep disappearing. This is totally random, no set pattern. I've tried updating drivers for the vid card, rolling back to old drivers, nothing seems to work. I've also tried the usual uncheck hide the taskbar and recheck, changing the start menu, keeping commonly used programs in start menu, etc. This is using an add-in card which is a necessity. Here is the specs on the machine: New Dell Optiplex 390 i3 2100 Proc 3gb Ram, Windows 7 32-bit. The add in card is an Nvidia 8400 GS model. I've tried different versions of the 8400gs, from MSI, or from other manufactureres and regardless it keeps happening. After the Icons disappear, I can log out and log back in and they return, but disappear again. I can reinstall the drivers for the vid card and it fixes it for a few days, and then they disappear again. There isn't any set pattern of days that it happens, software being used, etc. Another user in the office had the same problem with the exact same machine, but updating the vid card drivers fixed the issue. Anyone?

  Read the article

• Program for managing multiple monitors to keep from rearranging Windows

  - by Rumel

  I have a setup in use where I use up to four monitors. The problem is I generally switch around what I'm using and that messes up where all of my windows are. I'm on Windows 8 and have two graphics cards. My setup is as follows: Monitor 1: Card 1 Monitor 2: Card 1 Monitor 3: Card 2 TV 1: Card 2 I almost always have all the monitors turned on and in use. When I turn on the TV though, all of my windows get reconfigured and moved to different monitors. I don't know how to stop this. Another configuration I use is where I have Monitors 1 and 2 plus TV in use, and I have my Xbox in use on Monitor 3. When I get done with the Xbox and switch Monitor 3 over to the PC, everything is reconfigured. So is there a program out there that can help with this? I have the free version of Display Fusion in use but haven't seen settings to save monitor configurations.

  Read the article

• Debian - no sound output

  - by Gogeta70

  So I've been trying for the last few days to get sound output on my Linux desktop. The onboard audio is Intel HD Audio ICH9, but I couldn't get Alsa to even detect it, so I disabled it in BIOS and installed a PCI card - a Dynex DX-SC51. Searching around, I found that it needed the Alsa driver for ice1724, so I installed all the stuff for that. Now, the system detects my sound card, but I can't get any audio to play out of it. Here's some information: root@debian:~# lspci | grep audio 02:01.0 Multimedia audio controller: VIA Technologies Inc. VT1720/24 [Envy24PT/HT] PCI Multi-Channel Audio Controller (rev 01) root@debian:~# aplay -l **** List of PLAYBACK Hardware Devices **** card 0: ICE1724 [ICEnsemble ICE1724], device 0: ICE1724 [ICE1724] Subdevices: 0/1 Subdevice #0: subdevice #0 card 0: ICE1724 [ICEnsemble ICE1724], device 1: ICE1724 IEC958 [ICE1724 IEC958] Subdevices: 1/1 Subdevice #0: subdevice #0 I've been trying various solutions found on Google for a few days now and I'm getting nowhere. Hopefully someone here can point me in the right direction. Thanks.

  Read the article

• Ubuntu 12.04.1 Radeon 9550 stuck with 640x480, works in Geexbox

  - by Betty

  I am a complete new user trying to set up Ubuntu on an old desktop. It has an AGP Radeon 9550 graphics card. I am running Ubuntu from a USB drive with persistence as the PC currently has no hard drive I seem to be stuck in 640*480 mode. The desktop itself is larger, but the monitor display is stuck on 640*480. In SettingsDisplays, only the 640*480 option is available. What I have found out so far: The proprietary ati drivers no longer support my card. If 3D isn't an issue (it's not) the open source driver should be fine. This should be installed by default so in theory I am using it already xserver-xconf/pci/*.ids doesn't show any entries for the card's PCI id. hardware additional drivers show no proprietary drivers I tried the booting into the current version of Geexbox from a USB stick and this set the resolution correctly by default so I know it can be done, but I know no idea how. How can I tell what driver the card is using, and how can I get the higher resolutions back?

  Read the article

• Suspending my laptop breaks ethernet over firewire, are there commands which can fix it?

  - by Josh

  As mentioned in this question I am using a firewire cable to provide a private network between my laptop and my desktop, because it makes using the screen sharing program synergy much nicer than using WIFI. However when I leave my office for the day and I suspend my laptop, when I return the next day, the desktop and the laptop cannot communicate over firewire anymore. The firewire0 device still has an IP address. but when I try and ping the desktop I get no route to host I'm using kernel 2.6.35-24-generic #42-Ubuntu SMP x86_64 on Ubuntu 10.10. Is there some way I can remedy this without a reboot? Like, removing some kernel modules and re-inserting them? Here's what I have tried so far and the results: root@token:~# dmesg|tail -n 1 [592525.204024] firewire_core: phy config: card 0, new root=ffc1, gap_count=5 root@token:~# modprobe -r firewire_net firewire_ohci firewire_core root@token:~# modprobe -v firewire_ohci insmod /lib/modules/2.6.35-24-generic/kernel/lib/crc-itu-t.ko insmod /lib/modules/2.6.35-24-generic/kernel/drivers/firewire/firewire-core.ko insmod /lib/modules/2.6.35-24-generic/kernel/drivers/firewire/firewire-ohci.ko root@token:~# dmesg|tail [592525.204024] firewire_core: phy config: card 0, new root=ffc1, gap_count=5 [592563.410868] firewire_ohci: Removed fw-ohci device. [592579.160086] firewire_ohci: Added fw-ohci device 0000:02:00.0, OHCI v1.10, 4 IR + 8 IT contexts, quirks 0x2 [592579.160137] firewire_ohci: isochronous cycle inconsistent [592579.660294] firewire_core: created device fw0: GUID 0000000000000000, S400 [592579.663805] firewire_core: created device fw1: GUID 0017f2fffe89bce6, S400 [592579.663813] firewire_core: phy config: card 0, new root=ffc1, gap_count=5 [592579.700720] firewire_core: phy config: card 0, new root=ffc1, gap_count=5 [592579.700842] firewire_core: refreshed device fw0 [592579.702603] firewire_net: firewire0: IPv4 over FireWire on device 0000000000000000 root@token:~# ping stan.firewire PING stan.firewire (192.168.100.1) 56(84) bytes of data. From token.local (192.168.100.3) icmp_seq=1 Destination Host Unreachable From token.local (192.168.100.3) icmp_seq=2 Destination Host Unreachable From token.local (192.168.100.3) icmp_seq=3 Destination Host Unreachable I also tried removing the modules prior to suspending, and re-inserting after resuming. This did not work either :-(

  Read the article

• Dlink DWA-643 ExpressCard / Atheros AR5008 can't connect to wifi networks

  - by Justin Kelly

  I've just purchased a D-Link DWA-643 Xtreme N ExpressCard Notebook Adapter - but it can't connect to my wireless network The card is listed on the FSF website and - refer links below: http://www.fsf.org/resources/hw/index_html/net/wireless/index_html/cards.html http://www.dlink.com.au/products/?pid=550 Ubuntu see the card as using the Atheros AR5008 chipset - refer image below The card lights up and I can see that available wifi networks using this card - so it seems to 'just work' on ubuntu 12.04 but when i try and connect to my networks - it fails I've tried setting the network to all the different options (WEP, WPA2, no encryption, etc.. b/g/n ) but ubuntu sill cant connect to it I've also installed wicd but still couldn't connect Has anyone got a DWA-643 to work in Ubuntu? Or does anyone have any suggestion on how to get it to connect?? Any help would be greatly appreciated Note: the laptop has built in wifi but its broadcom, works but with dialup speed connection - and i've had nothign but trouble using the boardcom drivers so purchased the FSF recommended PCI expresscard as i hoped it would 'just work' on the latest Ubuntu i've have tried to disable the built in wifi - broadcom - but even with the broadcom uninstall and unavailable it didnt help the dlink to connect previously I had MAC address filtering on the router - i've added the dlinks MAC - and also disabled MAC address filtering - still no luck lspci output below: 18:00.0 Network controller: Atheros Communications Inc. AR5008 Wireless Network Adapter (rev 01) Subsystem: D-Link System Inc Device 3a6f Flags: bus master, fast devsel, latency 0, IRQ 18 Memory at e4000000 (64-bit, non-prefetchable) [size=64K] Capabilities: [40] Power Management version 2 Capabilities: [50] MSI: Enable- Count=1/1 Maskable- 64bit- Capabilities: [60] Express Legacy Endpoint, MSI 00 Capabilities: [90] MSI-X: Enable- Count=1 Masked- Capabilities: [100] Advanced Error Reporting Capabilities: [140] Virtual Channel Kernel driver in use: ath9k Kernel modules: ath9k

  Read the article

• nvidia graphics resolution problem

  - by Deepak Adhikari

  I am currently using ubuntu 12.04 I have acer aspire timelinex 3830tg with 2GB nvidia GeForce GT540M graphics card To enable my graphics card I followed following steps. 1.) I activated nvidia_current and nvidia_current_updates from additional drivers 2.) sudo nvidia-xconfig 3.) then reboot Following these steps I got following errors 1.) my resolution is 640x480...(there is no option of 1366x768 in display...previously there was 1366x768 when nvidia-xconfig command was not entered) 2.) when I open nvidia-settings it shows me following error "You do not appear to be using the NVIDIA X driver. Please edit your X configuration file (just run 'nvidia-xconfig' as root) and restart the X server." Problem need to be solved 1.) Change resolution to 1366x768 2.) Also how to check my nvidia graphics working or not Please some one please help me to solve these issues...I am seriously in need of my graphics card... I wan't my nvidia graphics card work as my intel graphics smoothly I am not willing to use bumblebee with regards, ubuntu user

  Read the article

• Direct IO enhancements in OVM Server for SPARC 2.2(a.k.a LDoms2.2)

  - by user12611315

  The Direct I/O feature has been available for LDoms customers since LDoms2.0. Apart from the latest SR-IOV feature in LDoms2.2, it is worth noting a few enhancements to the Direct I/O feature. These are: Support for Metis-Q and Metis-E cards. These cards are highly requested for support and are worth mentioning because they are the only combo cards containing both FibreChannel and Ethernet in the same card. With this support, a customer can have both SAN storage and network access with just one card and one PCIe slot assigned to a logical domain. This reduces cost and helps when there are less number of slots in a given platform. The following are the part numbers for these cards. I have tried to put the platforms on which each card is supported, but this information can get quickly outdated. The accurate information can be found at the Support Document.  Card Name  Part Number  Platforms Metis-Q: StorageTek Dual 8Gb Fibre Channel Dual GbE ExpressModule HBA, QLogic SG-XPCIEFCGBE-Q8-N  SPARC T3-4, T4-4 Metis-E: StorageTek Dual 8Gb Fibre Chanel Dual GbE ExpressModule HBA, Emulex SG-XPCIEFCGBE-E8-N SPARC T3-4, T4-4  Additional cards added to the portfolio of supported cards. This is mainly Powerville based Ethernet cards, the part numbers for these cards as below:  Part Number  Description  7100477 Sun Quad Port GbE PCI Express 2.0 Low Profile Adapter, UTP  7100481 Sun Dual Port GbE PCI Express 2.0 Low Profile Adapter, MMF  7100483 Sun Quad Port GbE PCI Express 2.0 ExpressModule, UTP  7110486 Sun Quad Port GbE PCI Express 2.0 ExpressModule, MMF    Note:  Direct IO feature has a hard dependency on the Root domain(PCIe bus owner, here Primary domain). That is, rebooting the Root domain for any reason may impact the logical domains having PCIe slots assigned with Direct IO feature. So rebooting a root domain need to be carefully managed. Also apply the failure-policy settings as described in the admin guide and release notes to deal with unexpected cases.

  Read the article

• ATI Radeon HD with Catalyst driver stuck mirroring screens

  - by Mike Axiak

  In 11.10 I replaced my aging Nvidia card with a new Radeon HD 6970 card. The single card has two DVI output ports which I've connected to two monitors. I installed Catalyst version 11.9 and I cannot get multiple monitors set up the way I want. I tried: $ sudo amdcccle and setting the mode to single desktop multiple monitors and whenever I do that Unity crashes and I get back to the login screen. Nothing shows up in the Xorg.*.log files for me to post here. There's only one card so I don't think xinerama would be any help here. Anyone have any ideas? EDIT: Here's my xorg.conf file: Section "ServerLayout" Identifier "aticonfig Layout" Screen 0 "aticonfig-Screen[0]-0" 0 0 EndSection Section "Module" EndSection Section "Monitor" Identifier "aticonfig-Monitor[0]-0" Option "VendorName" "ATI Proprietary Driver" Option "ModelName" "Generic Autodetecting Monitor" Option "DPMS" "true" EndSection Section "Monitor" Identifier "0-DFP3" Option "VendorName" "ATI Proprietary Driver" Option "ModelName" "Generic Autodetecting Monitor" Option "DPMS" "true" Option "PreferredMode" "1280x1024" Option "TargetRefresh" "60" Option "Position" "0 0" Option "Rotate" "normal" Option "Disable" "false" EndSection Section "Monitor" Identifier "0-CRT1" Option "VendorName" "ATI Proprietary Driver" Option "ModelName" "Generic Autodetecting Monitor" Option "DPMS" "true" Option "PreferredMode" "1280x1024" Option "TargetRefresh" "75" Option "Position" "0 0" Option "Rotate" "normal" Option "Disable" "false" EndSection Section "Device" Identifier "aticonfig-Device[0]-0" Driver "fglrx" Option "Monitor-DFP3" "0-DFP3" Option "Monitor-CRT1" "0-CRT1" BusID "PCI:5:0:0" EndSection Section "Device" Identifier "amdcccle-Device[5]-1" Driver "fglrx" Option "Monitor-DFP3" "0-DFP3" BusID "PCI:5:0:0" Screen 1 EndSection Section "Screen" Identifier "aticonfig-Screen[0]-0" Device "aticonfig-Device[0]-0" DefaultDepth 24 SubSection "Display" EndSubSection EndSection Section "Screen" Identifier "amdcccle-Screen[5]-1" Device "amdcccle-Device[5]-1" DefaultDepth 24 SubSection "Display" Viewport 0 0 Depth 24 EndSubSection EndSection

  Read the article

• Hybrid Graphics on Ubuntu 12.04 switching to discrete

  - by cfstras

  I have a Sony Vaio VPCCB-27FX with hybrid graphics. Using vgaswitcheroo enables me to switch my discrete card off to save power. Now when i want to switch to the discrete card for performance, my system freezes. I already tried logging out and killing x with service lightdm stop, but still, it freezes as soon as I echo DIS > switch. typing blindly, echo IGD > switch returns me to my console where it reads [ 179.555171] i915: switched off, but it seems the discrete card never gets switched on... running echo DDIS > switch gives me the following: [540....] [drm:atop_op_jump] *ERROR* atombios stuck in loop for more than 5secs aborting [540....] [drm:atom_execute_table_locked] *ERROR* atombios stuck executing CEE2 (len 62, WS 0, PS 0) @ 0xCEFE [540....] [drm:atom_execute_table_locked] *ERROR* atombios stuck executing BBF6 (len 1036, WS 4, PS 0) @ 0xBCF3 [540....] [drm:atom_execute_table_locked] *ERROR* atombios stuck executing BB8C (len 76, WS 0, PS 0) @ 0xBB94 [541....] [drm:r600_RING_TEST] *ERROR* radeon: ring test failed (scratch(0x8504)=0xFFFFFFFF) [541....] [drm:evergreen_resume] *ERROR* evergreen startup failed on resume after that, the atombios part repeats a few times. also, the terminal locks up again and sysrq+REISUB is my only rescue. Has anybody an idea how I can switch to my discrete card without the system locking up? #uname -srvmpio Linux 3.2.0-24-generic #39-Ubuntu SMP Mon May 21 16:52:17 UTC 2012 x86_64 x86_64 x86_64 GNU/Linux #lsb_release -r Description: Ubuntu 12.04 LTS

  Read the article

• Audio comes out of both headphone and speaker at the same time.. Ubuntu 12.04LTS [closed]

  - by pst007x

  I have the same issue on an Aspire. Ubuntu 12.04LTS 64bit realtek audio sound chip onboard If I plug in a headset, audio does not switch from internal speaker to headset, instead plays out of both at the same time. I have looked at the alsamixer setting, all on. I installed gnome-alsamixer, and I noticed headphone was ticked, if I untick the main audio mutes, and the headphone no longer works. Headset only works with internal speaker. Audio works fine on my other desktop and laptop running this release 00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 03) salvatore@salvatore-Aspire-7730:~$ cat /proc/asound/version Advanced Linux Sound Architecture Driver Version 1.0.24. salvatore@salvatore-Aspire-7730:~$ head -n 1 /proc/asound/card*/codec#* ==> /proc/asound/card0/codec#0 <== Codec: Realtek ALC888 ==> /proc/asound/card0/codec#1 <== Codec: LSI ID 1040 ==> /proc/asound/card0/codec#2 <== Codec: Intel Cantiga HDMI salvatore@salvatore-Aspire-7730:~$ aplay -l **** List of PLAYBACK Hardware Devices **** card 0: Intel [HDA Intel], device 0: ALC888 Analog [ALC888 Analog] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: Intel [HDA Intel], device 1: ALC888 Digital [ALC888 Digital] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: Intel [HDA Intel], device 3: HDMI 0 [HDMI 0] Subdevices: 1/1 Subdevice #0: subdevice #0 salvatore@salvatore-Aspire-7730:~$ uname -a Linux salvatore-Aspire-7730 3.2.0-23-generic #36-Ubuntu SMP Tue Apr 10 20:39:51 UTC 2012 x86_64 x86_64 x86_64 GNU/Linux salvatore@salvatore-Aspire-7730:~$ The alsa-base.conf does not exist Tried this: sudo apt-get remove --purge alsa-base sudo apt-get remove --purge pulseaudio sudo apt-get install alsa-base sudo apt-get install pulseaudio sudo alsa force-reload Then: sudo apt-get purge pulseaudio gstreamer0.10-pulseaudio sudo apt-get install pulseaudio gstreamer0.10-pulseaudio indicator-sound Tred this. sudo gedit Then open terminal: sudo /etc/modprobe.d/alsa-base.conf At the end of the file add a new line: options snd-hda-intel model=generic Save and then reboot But alsa-base.conf does not exist

  Read the article

• SDcardReader/Writer is not connected

  - by Insuk

  My IOGEAR sdCardReader/Writer is recongized on Ubutu(by using VM ware) but when I tried to connect to "Removable Devices - Alcor Micro Flash Card Reader/Writer" , the follwoing message is appeared. " The connection for the USB device "Alcor Micro Flash Card Reader/Writer" was unsuccessful. The device is currently in use. " But I think it is not used. Should I use IOGEAR driver for this one? When I connect the card reader, Ubuntu automatically got the "Alcor Micro Flash Card Reader/Writer" . How can I fix the problem? Thank you, Insuk the result of lsusb: Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 002: ID 0b95:7720 ASIX Electronics Corp. AX88772 Bus 002 Device 002: ID 0e0f:0003 VMware, Inc. Virtual Mouse Bus 002 Device 003: ID 0e0f:0002 VMware, Inc. Virtual USB Hub Bus 002 Device 004: ID 0e0f:0008 VMware, Inc. Bus 002 Device 005: ID 0403:bcda Future Technology Devices International, Ltd From the vmware log : 2013-10-18T09:00:07.494-06:00| vmx| I120: USB-CCID: Could not establish context: SCARD_E_NO_SERVICE(0x8010001d). 2013-10-18T09:00:07.494-06:00| vmx| I120: USB-CCID: Could not establish context: SCARD_E_NO_SERVICE(0x8010001d).

  Read the article

• Randomly Freezes - How Can I Diagnose the Problem?

  - by j0rd4n

  At random times, Ubuntu 10.04 freezes, and I have to do a hard shutdown. It was upgraded from 9.10 which didn't freeze. First, is this is common problem with a quick answer, and if not, what can I do to diagnose it? I've tried checking application/kernel logs, but nothing gives me a clue as to what caused the problem. My guess, is that since the OS froze, no logs could be updated. Ideas? SOLUTION: Solved it. My particular problem was my graphics card (integrated Radeon 9000 series). netconsole revealed I was getting the error: "reserve failed for wait". After trial-and-error, I manually configured my video card and disabled hardware acceleration. Completely fixed the issue. Here is what I did: Manually Created xorg.conf Ubuntu automatically configures xorg.conf and doesn't use a file. To edit this file, you have to tell Ubuntu to explicitly create one and then edit it. Here are the steps: Restart system Hold Shift as GRUB boots Select root terminal in GRUB login menu Execute: X -config xorg.conf.new Copy: cp xorg.conf.new /etc/X11/xorg.conf Disable Hardware Acceleration The following is specific to my Radeon card, but I'm sure other cards have a similar setup. Edit xorg.conf Find "Device" section for graphics card Uncomment "NoAccel" option and set to "True" Save + reboot Hope that helps.

  Read the article

• How can I get my monitor's maximum resolution without the proprietary AMD graphic driver installed?

  - by Venki

  I am using Ubuntu 14.04. I have an AMD Radeon 5570 HD graphic card. Actually, the default open source REDWOOD drivers aren't allowing me to choose my monitor's maximum screen resolution(which is 1366 x 768). I just have two resolutions displayed which are 1024x768 and 800x600 . If I give the command : xrandr -s 1366x768 then the output is: Size 1366x768 not found in available modes So just for the sake of getting 1366x768 resolution I am forced to install the proprietary graphic driver that AMD gives me from its site. But if I install it(which itself is quite a problem-prone process), I undergo a lot of 'inconvenience'. Sometimes after an OS update, the driver crashes unity. Then I will have to uninstall that driver from a tty and google around for a solution. Also I encounter screen tearing problems occasionally. In addition I also cant see my login screen(See this question which states this particular problem). The main problem is AMD does not update its driver as quick as Ubuntu updates its OS. This is quite irritating. So, I want the maximum resolution(and performance) that my graphics card and monitor can give me without installing the 'problematic' proprietary graphic card driver that AMD gives. Is this possible? Suggestions please. Thanks in advance. PS :- More system specs details:- Intel i3 2100 processor AMD P8H61-M PLUS2 motherboard AMD Radeon 5570 HD graphic card DELL monitor (BTW, Thank you for reading through my elaborate description!)

  Read the article

• cannot boot ubuntu 13.10 with my usb, Can i change the kernal on my laptop to run it?

  - by Carlos Dunick

  Currently i am running 12.04 and looking for an upgrade to 13.10 I first tried a bootable 64bit usb and failed. With the message saying "Kernal requires an x86-64 CPU but only detected an I686 CPU Unable to boot please use a kernal appropriate for your CPU" then tried 32bit and same message came up. Is this due to my laptop simply being to slow? or can/should i change the kernal somehow? Acer Aspire 5710z Intel Pentium dual core processor, 1.73Ghz, 533 MHz FSB, 1 MB L2 cache. 2GB DDR2 lspci 00:00.0 Host bridge: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML and 945GT Express Memory Controller Hub (rev 03) 00:02.0 VGA compatible controller: Intel Corporation Mobile 945GM/GMS, 943/940GML Express Integrated Graphics Controller (rev 03) 00:02.1 Display controller: Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller (rev 03) 00:1b.0 Audio device: Intel Corporation NM10/ICH7 Family High Definition Audio Controller (rev 02) 00:1c.0 PCI bridge: Intel Corporation NM10/ICH7 Family PCI Express Port 1 (rev 02) 00:1c.2 PCI bridge: Intel Corporation NM10/ICH7 Family PCI Express Port 3 (rev 02) 00:1c.3 PCI bridge: Intel Corporation NM10/ICH7 Family PCI Express Port 4 (rev 02) 00:1d.0 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller #1 (rev 02) 00:1d.1 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller #2 (rev 02) 00:1d.2 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller #3 (rev 02) 00:1d.3 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller #4 (rev 02) 00:1d.7 USB controller: Intel Corporation NM10/ICH7 Family USB2 EHCI Controller (rev 02) 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e2) 00:1f.0 ISA bridge: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge (rev 02) 00:1f.1 IDE interface: Intel Corporation 82801G (ICH7 Family) IDE Controller (rev 02) 00:1f.2 SATA controller: Intel Corporation 82801GBM/GHM (ICH7-M Family) SATA Controller [AHCI mode] (rev 02) 00:1f.3 SMBus: Intel Corporation NM10/ICH7 Family SMBus Controller (rev 02) 04:00.0 Ethernet controller: Broadcom Corporation NetLink BCM5787M Gigabit Ethernet PCI Express (rev 02) 05:00.0 Network controller: Broadcom Corporation BCM4311 802.11b/g WLAN (rev 01) 06:00.0 FLASH memory: ENE Technology Inc ENE PCI Memory Stick Card Reader Controller 06:00.1 SD Host controller: ENE Technology Inc ENE PCI SmartMedia / xD Card Reader Controller 06:00.2 FLASH memory: ENE Technology Inc Memory Stick Card Reader Controller 06:00.3 FLASH memory: ENE Technology Inc ENE PCI Secure Digital / MMC Card Reader Controller

  Read the article

• Freeze on Boot WindowsXP

  - by kyle

  Ok first off I know I should have Windows 7 but i don't Its a really old computer and i'm not sure if it can run the latest OS of ubuntu but i'm trying any whay so here are my specs or what i could have gathered from the computer(viruses are every where and most of the drivers are gone) Specs OS WindowsXP(it isn't letting me know which one that is blocked) Graphics card(can't access device manger it is blocked also) graphics card is 2003-2004 era though ram 512mb last time i checked USB(Drivers Gone) Wireless Card(Drivers Gone) Lan Card(Drivers Gone) Audio(Drivers Gone) CD Drive (it runs and works but i can't check its properties that's blocked to) Computer Dell Inspiron 600m Good News I have the Driver CD for everything Bad News I Don't have the OS CD I know the Computer is trash but i want to flash it anyway and just install linux(ubuntu) The second problem is it doesn't even want to load the CD all the way it is just stuck at the Ubuntu Screen with all the bubbles orange and if i resart it just does it again. any help would be nice. EDIT: okay i tried the first comment and it said i need a firmware file from http://wireless.kernel.org/en/users/Drivers/b43#devicefirmware the firmware is b43/ucode5.fw, b43-open/ucode5.fw is there any other way of installing this firmware without being in the Ubuntu because what I have read is I need to be in Ubuntu to do this... Thanks for all the help you are giving me i have read your comments but i don't want to wait another two hours downloading that if i can get it working on this...

  Read the article

• Kubuntu never gets to the login screen

  - by searchfgold6789

  I am not sure if Xorg is using the right device... The system in question is an A4-1400 CPU with built-in Radeon Graphics. I added a PCIe Radeon HD 5750, and changed the BIOS so it would use that card automatically. Now it appears that I can see output from the TV plugged into the HDMI port, and boot into recovery mode, but cannot get to a desktop - X doesn't start. It just freezes at the Kubuntu splash screen. I have no idea how to get X to use the proper graphics card. I pasted the Xorg.log to http://paste.ubuntu.com/6261137/. And the Xorg.conf generated by aticonfig --initial is at http://paste.ubuntu.com/6261161/ Also, see lspci and lshw -c display outputs. I can provide more information, but something does tell me X is not using the right graphics card and I've no idea where to begin how to fix it... I faced a similar issue before with another distribution but found no information anywhere on how to make X use a specific graphics card. Or maybe it's not that simple.

  Read the article

• How to Activate wifi in Toshiba Satellite C655?

  - by user4106

  I've recently bought a Toshiba Satellite C655. It came with Windows 7 preinstalled. I've never had a notebook before, but as a desktop user, I was a Ubuntu user since 2 years, and I've never had a problem with drivers, wifi, etc. When I tried to install the Ubuntu 10.04, and also the new and fresh 10.10, in my new laptop, I experienced some troubles with some of the componentes of my computer. For example, I was not able to activate my wi-fi card, although I know the kernel recognizes it correctly, because when doing "lspci" at the terminal, it was listed. Anyhow, I'm not able to "activate" the wifi, or whatever it's necessary to do in order to be able to search for public networks available, and to connect with them. The wifi-card the laptops brings is the (the lspci output): 03:00.0 Network Controller: Atheros Communications Inc. AR9285 Wireless Network Adapter (PCI-Express) [168c:002b] (rev 01). It's anything in you can help me? Thanks a lot in advance! Edit Neither solution seems to work. In first place, i've tried installig what hhlp told me. After the installation, nothing seems to change: on right-clicking the wireless icon, it seems to recognize the card, because the option "Enable wifi" was ticked. But, once again, i was not able to "turn the wi-fi" on. In second place, i didn't try installing the drives, because the card is already recongnized. The issue is that i cannot seem to turn it on! One thing i've probably missed is that the Toshiba cames with a windows sofntware that allows you to enable / disable the wifi tools. So, it does not have an external "button" to turn it off. I don't know if that's the problem, but i have the feeling that the issue may be aroud there: in how to turn ON the wifi-signal (or to verify if it's on or off) in my ubuntu.

  Read the article

• Refresh page isnt working in asp.net using treeview

  - by Greg

  Hi, I am trying to refresh an asp.net page using this command: <meta http-equiv="Refresh" content="10"/> On that page I have 2 treeviews. The refresh works ok when I just open the page, but when I click on one of the treeviews and expand it, the refresh stopps working and the page isnt being refreshed. Any ideas why this can happen? Is there any connection to the treeview being expanded? Here is the full code of the page: public partial class Results : System.Web.UI.Page { protected void Page_Load(object sender, EventArgs e) { } // Function that moves reviewed yellow card to reviewed tree protected void ycActiveTree_SelectedNodeChanged(object sender, EventArgs e) { ycActiveTree.SelectedNode.Text = "Move To Active"; ycReviewedTree.PopulateNodesFromClient = false; ycReviewedTree.Nodes[ycReviewedTree.Nodes.Count - 1].ChildNodes.Add(ycActiveTree.SelectedNode.Parent); Application["reviewedTree"] = new ArrayList(); int count = ((ArrayList)Application["activeTree"]).Count; // Move all the nodes from activeTree application to reviewedTree application for (int i = 0; Application["activeTree"] != null && i < count; i++) { ((ArrayList)Application["reviewedTree"]).Add(((ArrayList)Application["activeTree"])[i]); ((ArrayList)Application["activeTree"]).RemoveAt(0); } } protected void ycActiveTree_TreeNodePopulate(object sender, TreeNodeEventArgs e) { if (Application["idList"] != null && e.Node.Depth == 0) { string[] words = ((String)Application["idList"]).Split(' '); // Yellow Card details TreeNode child = new TreeNode(""); // Go over all the yellow card details and populate the treeview for (int i = 1; i < words.Length; i++) { child.SelectAction = TreeNodeSelectAction.None; // Same yellow card if (words[i] != "*") { // End of details and start of point ip's if (words[i] == "$") { // Add the yellow card node TreeNode yellowCardNode = new TreeNode(child.Text); yellowCardNode.SelectAction = TreeNodeSelectAction.Expand; e.Node.ChildNodes.Add(yellowCardNode); child.Text = ""; } // yellow card details else { child.Text = child.Text + words[i] + " "; } } // End of yellow card else { child.PopulateOnDemand = false; child.SelectAction = TreeNodeSelectAction.None; // Populate the yellow card node e.Node.ChildNodes[e.Node.ChildNodes.Count - 1].ChildNodes.Add(child); TreeNode moveChild = new TreeNode("Move To Reviewed"); moveChild.PopulateOnDemand = false; moveChild.SelectAction = TreeNodeSelectAction.Select; e.Node.ChildNodes[e.Node.ChildNodes.Count - 1].ChildNodes.Add(moveChild); child = new TreeNode(""); Application["activeTree"] = new ArrayList(); ((ArrayList)Application["activeTree"]).Add(e.Node.ChildNodes[e.Node.ChildNodes.Count - 1]); } } } // If there arent new yellow cards else if (Application["activeTree"] != null) { // Populate the active tree for (int i = 0; i < ((ArrayList)Application["activeTree"]).Count; i++) { e.Node.ChildNodes.Add((TreeNode)((ArrayList)Application["activeTree"])[i]); } } // If there were new yellow cards and nodes that moved from reviewed tree to active tree if (Application["idList"] != null && Application["activeTree"] != null && e.Node.ChildNodes.Count != ((ArrayList)Application["activeTree"]).Count) { for (int i = e.Node.ChildNodes.Count; i < ((ArrayList)Application["activeTree"]).Count; i++) { e.Node.ChildNodes.Add((TreeNode)((ArrayList)Application["activeTree"])[i]); } } // Nullify the yellow card id's Application["idList"] = null; } protected void ycReviewedTree_SelectedNodeChanged(object sender, EventArgs e) { ycActiveTree.PopulateNodesFromClient = false; ycReviewedTree.SelectedNode.Text = "Move To Reviewed"; ycActiveTree.Nodes[ycActiveTree.Nodes.Count - 1].ChildNodes.Add(ycReviewedTree.SelectedNode.Parent); int count = ((ArrayList)Application["reviewedTree"]).Count; // Move all the nodes from reviewedTree application to activeTree application for (int i = 0; Application["reviewedTree"] != null && i < count; i++) { ((ArrayList)Application["activeTree"]).Add(((ArrayList)Application["reviewedTree"])[i]); ((ArrayList)Application["reviewedTree"]).RemoveAt(0); } } protected void ycReviewedTree_TreeNodePopulate(object sender, TreeNodeEventArgs e) { if (Application["reviewedTree"] != null) { // Populate the reviewed tree for (int i = 0; i < ((ArrayList)Application["reviewedTree"]).Count; i++) { e.Node.ChildNodes.Add((TreeNode)((ArrayList)Application["reviewedTree"])[i]); } } } } Thanks, Greg

  Read the article

• Graphics cards so I can have 4 monitors

  - by oshirowanen

  I currently have a single old graphics card to which I have connected 2 monitors giving me a big desktop of 2560x1024. If I get 2 of the following graphics card: http://www.ebuyer.com/238428-gigabyte-gts-450-1gb-gddr5-dual-dvi-mini-hdmi-out-pci-e-graphics-gv-n450-1gi Will I be able to connect to monitors per graphics card, giving me a total resolution of 5120x1024? I guess what I'm asking is, will I simply be able to stick both graphics cards in, plug the monitors in and will it all just work out of the box? I currently have 4 dvi monitors which have a native resolution of 1280x1024 each.

  Read the article

• Pyglet vs. PyQt

  - by L. De Leo

  I need to implement a really simple card game. As the game logic is written in Python I chose to stick with some Python framework even if my goal is to develop a Windows only version. I also don't like to work with .NET so I ruled out Iron Python + WPF. I tried to write a simple prototype with Pyglet but soon discovered that I will have to do a lot of stuff by hand: things like detecting mouseover events and finding which card was clicked on and moving it, etc... very low level and unnecessary for my use-case. So I thought it might be easier to do things in PyQt. Do you reckon it would be feasible to use PyQt for implementing a simple card game? Will I have higher level events I can work with?

  Read the article

• Realtek HD Audio Driver for Ubuntu 12.04?

  - by Shifat Taushif

  I recently switched to Ubuntu 12.04 on my Toshiba laptop. I haven't had any issues except for one. I realized that there is a red light coming out of my earphone jack. It's something like this: http://i.stack.imgur.com/gokuH.jpg I looked in the folder that Toshiba created for installing drivers , then I found out that they had installed this driver for my sound card : Realtek HD Audio Driver v6.0.1.5689_withMaxxAudio_Compal(20080908) I'm guessing that the sound card supports Optical Audio Output. I also found out that when I mute the speakers, the light goes away. But when I unmute it, it comes back. I don't really mind having it but it drains my battery. So, is there a Ubuntu version for my sound card driver? Thanks in advance.

  Read the article

< Previous Page | 56 57 58 59 60 61 62 63 64 65 66 67  | Next Page >