Search Results

Search found 19212 results on 769 pages for 'side projects'.

Page 603/769 | < Previous Page | 599 600 601 602 603 604 605 606 607 608 609 610  | Next Page >

  • How to remove NTFS system files from a previous Vista installation

    - by Boldewyn
    I'm trying to shrink my system partition under Win Vista. It's all fine, except that in front of the last 300MB of the volume sits a single file, that cannot be moved by defrag or other means from its position. It's called C:\$Extend\$UsnJrnl:$J, and my assumtion is, that it is left from a previous installation of Vista, when I re-set up the system. Now, googling for this kind of files brings interesting results, but no solution to my problem: Files left on the disk can become ownerless in a new setup of Windows and inaccessible (even for administrators). To be able to access them again, I found the tip to use takeown to re-assign them to the Admin group (or anyone else). Works like a charm for normal files, but not for the C:\$Extend stuff. The C:\$Extend folder is a system folder of the NTFS file system, where the journal is stored (especially in a file called $UsnJrnl:$Data, whose name is surprisingly close to mine). You can delete the journal with fsutil usn /delete C:, however, this doesn't work from within the booted system (as I found out trying). Also, I'm not quite sure of the side effects. You can't move the NTFS own files with standard defrag tools. The same holds, by the way, for not accessible files. Every bit of knowledge out there is targeted to either not accessible files or the $Extend NTFS stuff, but noone addresses my problem involving both, an inaccessible system file. Question: How can I remove this file, or at least how can I move it on the disk?

    Read the article

  • Outlook 2007 + Exchange 2010 (Save All Attachments)

    - by RobertPitt
    About 3 weeks back our company upgraded our mail system to Exchange 2010, all went smooth, few issues but nothing major. A few days ago we had a call from a colleague where he was unable to save all attachments, From File > Save As > Save All Attachments. When the email has a single attachment it works perfectly normal, and depending on the file type it allows you to save multiple attachments. But there's a lot of file types that will not work, such as zip, pdf, doc etc, Usually we get a location box open up asking where we would like to drop the attachments, but it does nothing, You click Save All Attachments and nothing happens. After hours of research I have come across mixed results, a lot of people on forums have been explaining that they have recently crossed over to Exchange 2010 and there issues started there. But on the other hand Microsoft released a KB (278188) which was depressing if that, but that article was published in 2007, as stated by the time stamp, and Exchange 2010 has only come out recently. Im looking to see if you guys have any clues what could be causing this, anything server side that I can take a look at (AD, Exchange, ...). Any help on this is greatly supported

    Read the article

  • Automated Linux VMs on Hyper-V 2012

    - by Mick
    I have a requirement to create a ton of linux VMs for our customers (we run managed infrastructure) on Hyper-V 2012 in the coming months and I have an issue with automating it. Here is how I need it to work: User accesses their web page and creates a VM. VM is created with a unique IP and name User logs in over SSH I know Hyper-V quite well and can work with powershell and am a C# programmer so the development side of things is taken care of. I also know enough about Linux to be at least competent: I have used it on and off for a number of years but not done anything Enterprise-level with it. All this can be done easily by manual processes but I need to be able to script or program this to automate it as there could be hundreds of them being created but I don't know how. My first thought is to have a database with random-generated names and IPs already created but I don't know how to get a Linux VM to boot up and grab one from the database... I suppose a Kickstart script would take care of it but I don't know what to do from there. Here is what is bouncing around in my head: Create a std linux build. - Easy to do Someone clicks "Create VM" and I pull a name and IP from the database and write it to a kickstart script. - Easy to do I could then open the template VHDX file and copy in the script and then save it. - Not sure if possible User boots up new VM and the kickstart script gives it the name and IP I assigned it. My problem is that I don't know how to open a VHDX file and insert a kickstart script into it... can't figure it out. I am reaching here and this solution may be miles off... I am more used to creating Windows VMs with scripts and so on which i am more familiar with... any help would be appreciated. Thanks Mick

    Read the article

  • Salary Survey Entry Level network position [closed]

    - by will
    Hello, I started interning with a company about 5 months ago and for the past 7 months I have been a normal part time employee. This week I have a review, where I am hoping to get a raise. I started at $8 interning, and now I'm up to $13. What I am trying to figure out is how to survey what others are making in similar positions so I can take it to the review as a base number. here are my thoughts on my position right now. Review Thoughts My Qualifications: • Associates of applied Science - IT network Specialist • CompTIA A+ certification • CompTIA Server+ certification • CompTIA Network+ certification • Currently pursuing Cisco certifications • Junior status at Insert college Pursuing Bachelors in Information Technology with an emphasis in Networking. 3.4 GPA • 1 year of working at Insert Company. My contributions to Insert Company • Offering near fulltime through semester and fulltime through summer. • Ability to work after hours and on weekends • Developed and support helpdesk system • Set up and maintain Update server to keep desktop clients up to date • Deployed and maintain antivirus solution for end users • Assist with main projects such as SAN, Virtualization, and network survey. Any tips on determining an asking number would help. I was thinking $17-$18, am I way off here? • Migrating end user stations to Windows 7 (current project) • Developing imaging solution for Desktop PCs (current project)

    Read the article

  • Encrypting peer-to-peer application with iptables and stunnel

    - by Jonathan Oliver
    I'm running legacy applications in which I do not have access to the source code. These components talk to each other using plaintext on a particular port. I would like to be able to secure the communications between the two or more nodes using something like stunnel to facilitate peer-to-peer communication rather than using a more traditional (and centralized) VPN package like OpenVPN, etc. Ideally, the traffic flow would go like this: app@hostA:1234 tries to open a TCP connection to app@hostB:1234. iptables captures and redirects the traffic on port 1234 to stunnel running on hostA at port 5678. stunnel@hostA negotiates and establishes a connection with stunnel@hostB:4567. stunnel@hostB forwards any decrypted traffic to app@hostB:1234. In essence, I'm trying to set this up to where any outbound traffic (generated on the local machine) to port N forwards through stunnel to port N+1, and the receiving side receives on port N+1, decrypts, and forwards to the local application at port N. I'm not particularly concerned about losing the hostA origin IP address/machine identity when stunnel@hostB forwards to app@hostB because the communications payload contains identifying information. The other trick in this is that normally with stunnel you have a client/server architecture. But this application is much more P2P because nodes can come and go dynamically and hard-coding some kind of "connection = hostN:port" in the stunnel configuration won't work.

    Read the article

  • Ubuntu network card problem.

    - by Steve Greene
    Hello folks, Several days ago, I installed Ubuntu 9.10 onto my Acer Aspire 3100 laptop, running it alongside Widows Vista as a dual-bootable system. Creation of the Ubuntu boot CD went fine, and the installation onto my hard drive was flawless. Ubuntu opens and behaves as I would expect, except for one little problem. For reasons unknown to me, Ubuntu is not communicating with my laptop's networking hardware, and I have no internet connectivity, it works fine under Windows Vista. Up in the right side of the Ubuntu desktop, I click on the network icon and it does not show a wireless connection at all. At home, where I use a dialup modem, I also see no means of getting online. My modem is an HDAUDIO Soft Data Fax Modem with Smart CP,manufactured by CXT (Conexant Systems Inc., file version 4.0.13.0, and the driver version is 7.58.0.0). I am an advanced computer user, but I am not a programmer. I seek a solution that is user-friendly for normal people, something equivalent to a driver that I can easily install or activate that will allow Ubuntu to see my hardware and get me connected. Can anyone help me over this hopefully-little glitch My processor is a Mobile AMD Sempron Processor 3500+ at 1.80 GHz, 1.50 GB RAM, and a 32-bit Operating System.

    Read the article

  • Run a script on user connection on the VM host

    - by Scott Chamberlain
    I have a server running a Virtual Desktop Managed Pool, what I would like to do is when a user logs in I would like a script to check the number of available VMs and if below a threashold add additional VMs to the pool. The script to check the load and add to the pool is not the problem, I have that already figured out: $collectionName = "Test1"; $rdvh = "vmHost.example.com"; $minAvailableVMs = 2; Import-Module RemoteDesktop; $pool = Get-VirtualDesktopCollection -CollectionName $collectionName; $availableVMs = $pool.Size - ($pool.Size * $pool.PercentInUse / 100); $status = Get-VirtualDesktopCollectionJobStatus $collectionName #only add new servers if we are below the threashold and in the JOB_COMPLETEED state if($availableVMs -lt $minAvailableVMs -and $status.Status -eq [Microsoft.RemoteDesktopServices.Management.VirtualDesktopCollectionJobStatus]::JOB_COMPLETED) { Add-RDVirtualDesktopToCollection -CollectionName $collectionName -VirtualDesktopAllocation @{"$rdvh" = 1} } The problem I am having is, how do I run the above script on the Virtualization Host/Connection Broker/Some other server when a user connects?. I don't think it would be appropriate to run this as a logon script inside the VM, I think there is a way to do this on the management side but I don't know the new scripting interface in Server 2012 R2 well enough to know which commandlets I should look for to schedule this. EDIT: I know System Center is perfect for this but I do not have a license and was denied when I asked for it to be added to the budget.

    Read the article

  • Roundcube "Server Error (OK!)": Lists no messages but can get messages according to the log file

    - by thonixx
    In my server setup there are three virtual machines. One windows machine, an Ubuntu Server 11.10 and a Debian Squeeze mailserver. On the Ubuntu system I have Roundcube installed and I want to connect to the virtual mail server. What's the problem After login into Roundcube it says "Server Error (OK!)" and lists no messages. More information On the Ubuntu server there is no error in any log file (even Roundcubes log files). In the imap log file there you can see Roundcube is able to fetch all imap messages (I can see them in the imap log file created by Roundcube). And on the side of the mail server there are no error messages too. The test connection at the end of the configuration of Roundcube works too, there is a "success" notification. Even the basic login at Roundcube login dialog works without any error message. Roundcube log file you can look here for the log file: http://fixee.org/paste/wxg36eh/ So does anyone know what's wrong with Roundcube?

    Read the article

  • How do you optimize your Outlook Exchange + IMAP setup?

    - by Mike
    My company provides an Outlook/Exchange account we must use for mail/calendar. Like many companies, they unfortunately also provide a ridiculously small mail quota. I got tired of managing and backing up .pst files (since I'm always in my e-mail there is never a good time to back it up), so I started storing my archived mail "in the cloud", using an IMAP server I set up on my Linux box. This has a few drawbacks for me: IMAP (at least the implementation in Outlook) is *very slow*. Furthermore, if I move a large number of messages to the IMAP server, it blocks the entire Outlook client for hours sometimes, which is quite annoying. Can't use exchange over HTTP to do mail without launching a VPN session, because the client-side rules I have which organize my mail fail and disable the rule if the IMAP server can't be reached. If I reply to a message from my IMAP store, I have to specify a SMTP server willing to relay for me in order to send e-mail, unless I always remember to select my Exchange account while composing e-mail. ... but the main advantage of being very easy to back up, with a couple of cron jobs that essentially do an 'rsync'. Short of moving the IMAP server to my local host (which seem like might have the same file locking problems as using a .pst), my options seem limited for solving (1). I'd like to come up with a solution for (2) and (3) though. For problem (2) would it be possible to somehow tell Outlook that the IMAP server is "offline", and have it synchronize my changes during a periodic "send and receive"? If so, I wonder if it would block the Outlook client, like it does in problem (1), and if it would be compatible with the client-only rules I use to sort my mail into folders. I've looked all over the options menu and have not found a way to tell Outlook to not use a certain account for sending mail, which would solve (3). Is anyone else crazy enough to be doing something like this? Any ideas?

    Read the article

  • Why would e-mail from our own domain not be forwarded to gmail

    - by netboffin
    To solve a problem with spam on our server we tried to forward e-mail from our dedicated server's mailserver(matrix smtp service) to gmail, but while most e-mails got through e-mail from our own domain all went missing. They weren't in the inbox or spam or anywhere else. We've had to go back to using the old system, which means my boss gets a huge amount of spam. We have a windows 2003 server with iis 6 and the matrix smtp service installed. I've toyed with the idea of installing a mail proxy like ASSP but it looks pretty complicated. We're hosting 20 domains on the server as well as our own which has an online shop whose payment system depends on email. I can't start playing around with complicated solutions when it could have disastrous consequences and I don't know enough to implement them safely. So my question has two parts: Part One: Why can't we forward e-mails from people using the same domain. If our domain was foobar.com then [email protected] can't receive from [email protected], but he can receive from everyone else. Part Two: Is there a really simple server side solution to spam that would work with matrix? For instance popfile?

    Read the article

  • MAMP Pro virtual hosts on Mountain Lion not being recognized

    - by user135242
    I'm running MAMP PRO 2.1.1 on OSX 10.8.1 and not having any luck getting Apache to recognize any hosts that have been set up in MAMP besides localhost. This only happens when trying to use port 80. When I switch to port 8888 everything runs fine. Mountain Lion's Apache has been disabled and I get no errors or warnings when starting MAMP and the servers. Any doc root I set for "localhost" runs without problem. Any other server name I define, however, results in "cannot connect" when viewing in Chrome (not to be confused with "cannot find" - the browser is in fact following /etc/hosts to 127.0.0.1, but MAMP's Apache is simply not responding) I was wondering if anyone else has run into this issue or knows how to solve it. I'm working on some WordPress development and it keeps wanting to redirect to the base URL (with no port reference) even during setup. I'm sure I could fix things from the WP side but I'd rather figure out what the root issue is with MAMP. Thanks in advance for any insight you can provide.

    Read the article

  • Centos iptables configuration for Wordpress and Gmail smtp

    - by Fabrizio
    Let me start off by saying that I'm a Centos newby, so all info, links and suggestions are very welcome! I recently set up a hosted server with Centos 6 and configured it as a webserver. The websites running on it are nothing special, just some low traffic projects. I tried to configure the server as default as possible, but I like it to be secure as well (no ftp, custom ssh port). Getting my Wordpress to run as desired, I'm running into some connection problems. 2 things are not working: installing plugins and updates through ssh2 (failed to connect to localhost:sshportnumber) sending emails from my site using the Gmail smtp (Failed to connect to server: Permission denied (13)) I have the feeling that these are both related to the iptables configuration, because I've tried everything else (I think). I tried opening up the firewall to accept traffic for ports 465 (gmail smtp) and ssh port (lets say this port is 8000), but both the issues remain. Ssh connections from the terminal are working fine though. After each change I tried implementing I restarted the iptables service. This is my iptables configuration (using vim): # Generated by iptables-save v1.4.7 on Sun Jun 1 13:20:20 2014 *filter :INPUT ACCEPT [0:0] :FORWARD ACCEPT [0:0] :OUTPUT ACCEPT [0:0] -A INPUT -m state --state RELATED,ESTABLISHED -j ACCEPT -A INPUT -p icmp -j ACCEPT -A INPUT -i lo -j ACCEPT -A INPUT -p tcp -m tcp --dport 8000 -j ACCEPT -A INPUT -p tcp -m tcp --dport 80 -j ACCEPT -A INPUT -p tcp -m tcp --dport 465 -j ACCEPT -A INPUT -j REJECT --reject-with icmp-host-prohibited -A FORWARD -j REJECT --reject-with icmp-host-prohibited -A OUTPUT -m state --state RELATED,ESTABLISHED -j ACCEPT -A OUTPUT -o lo -j ACCEPT -A OUTPUT -p tcp -m tcp --dport 8000 -j ACCEPT -A OUTPUT -p tcp -m tcp --dport 465 -j ACCEPT COMMIT # Completed on Sun Jun 1 13:20:20 2014 Are there any (obvious) issues with my iptables setup considering the above mentioned issues? Saying that the firewall is doing exactly nothing in this state is also an answer... And again, if you have any other suggestions for me to increase security (considering the basic things I do with this box), I would love hear it, also the obvious ones! Thanks!

    Read the article

  • Microsoft Office 2003 applications crash on 'Save As' to a network mapped drive

    - by Archit Baweja
    Hey guys, so I'm not sure if it belongs on ServerFault forums so figured I'd ask here first because its a workstation/client side issue. I have a client where we have windows server 2003 setup, with windows xp professional setup on all the workstations. We've setup a 'domain' and all workstations logon to the domain (authenticated by the Windows Domain Controller), and in the logon script we map drives on to each workstation. Everything is working peachy except for one workstation, where when I open a file in excel from a mapped drive, it opens fine, but when I go to hit Save As, the Save As dialog pops and hangs up. I cannot perform any other action in excel. When I try cancel the Save As dialog, excel crashes. The mapped drive opens up fine in Windows Explorer. To further investigate this issue, I created a new blank text document on the network drive in Windows Explorer. I then opened it. Then hit save as, and the Save As dialog opened up fine and it would let me save the document. I repeated the above steps for a word document. However this time the Save As dialog hung/froze again. So I'd imagine its a Microsoft Office Issue. Any ideas?

    Read the article

  • Recommended programming language for linux server management and web ui integration.

    - by Brendan Martens
    I am interested in making an in house web ui to ease some of the management tasks I face with administrating many servers; think Canonical's Landscape. This means doing things like, applying package updates simultaneously across servers, perhaps installing a custom .deb (I use ubuntu/debian.) Reviewing server logs, executing custom scripts, viewing status information for all my servers. I hope to be able to reuse existing command line tools instead of rewriting the exact same operations in a different language myself. I really want to develop something that allows me to continue managing on the ssh level but offers the power of a web interface for easily applying the same infrastructure wide changes. They should not be mutually exclusive. What are some recommended programming languages to use for doing this kind of development and tying it into a web ui? Why do you recommend the language(s) you do? I am not an experienced programmer, but view this as an opportunity to scratch some of my own itches as well as become a better programmer. I do not care specifically if one language is harder than another, but am more interested in picking the best tools for the job from the beginning. Feel free to recommend any existing projects except Landscape (not free,) Ebox (not entirely free, and more than I am looking for,) and webmin (I don't like it, feels clunky and does not integrate well with the "debian way" of maintaining a server, imo.) Thanks for any ideas!

    Read the article

  • dom0 enable IPv6 for guests

    - by user98651
    I am looking at deploying IPv6 to my virtual machines. Right now I have v6 working great on the dom0 using a 6in4 provided by Hurricane Electric as I do not have native v6. However, I would like to distribute some of the /48 I am receiving to the domUs (/64 per machine would be ideal, but I am open to your suggestions). Static configuration on the domU side is fine. All I want to accomplish is getting the traffic to pass through the dom0 to the domU. To say the least, I'm still trying to wrap my head around all the virtual interfaces and bridges Xen creates. Yes, I have Googled around for this a bit and have not found anything great. I tried using two "vif-route6" bash scripts with no luck (possibly due to my ignorance with Xen networking). I am still stuck (mainly in how to configure the dom0). I would like to imagine this problem is relatively easy to solve and I look forward to your suggestions and help! Edited post to clarify my end goal: getting IPv6 to domU guests. I am completely open to suggestions but am hoping for something other than setting up a tunnel for every guest.

    Read the article

  • Active Directory: how to be SURE users can change their own passwords?

    - by Latro
    Working on some project where a tool we have has to authenticate against AD connecting via LDAPS and perform password changes if required or requested. IN THEORY, the tool does that, and we have seen it work in other projects. IN PRACTICE, against this particular directory, it fails. Been driving me crazy. The particulars of the situation: Windows 2003 AD Defined a "technical user" for the LDAP connection with rights to change users passwords When password change is required - in this case, because pwdLastSet is 0 - the tool uses the technical account to go, bind to the controller and change the user password. If password change is not required but the user request it, then the bind is done with the user account. That last condition is the one that doesnt work. With the technical user the password change is possible, but with the user itself, it isnt. We get an error like this: LDAP access failed: javax.naming.directory.InvalidAttributeValueException: [LDAP: error code 19 - 0000052D: AtrErr: DSID-03190F00, #1: 0: 0000052D: DSID-03190F00, problem 1005 (CONSTRAINT_ATT_TYPE), data 0, Att 9005a (unicodePwd) no idea what DSID-03190F00 means cause it doesnt seem to be anywhere in google :-/ Been looking at several MS documentation pages and frankly, I'm not understanding one bit of it. There is some "control access right" called User-Change-Password that may, or may not, control what objects have the right to change their own password, which may, or may not, have to do with ACE and ACLs... There is GPO. There is maybe the password policy but it is only set to ask for passwords of 6 chars or more... Can anybody explain to me in easy-to-check steps how can I go and tell the AD admin guy (who is as lost as me) what to do to ensure that users in the AD directory (objectClass top,person,organizationalPerson and user) are able to change their own passwords by themselves? Thanks in advance

    Read the article

  • How to make an x.509 certificate from a PEM one?

    - by Ken
    I'm trying to test a script, locally, which involves uploading a file using a Java-based program to a FileZilla FTPES server. For the real thing, there is a real certificate on the FZ server, and the upload step (tested alone) seems to work fine. I've installed FileZilla Server on my dev box (so it'll test uploading from localhost to localhost). I don't have a real certificate for it, of course, so I used the "Generate new certificate..." button in FZ. It works fine from an interactive FTPES program (as long as I OK the unknown cert), but from my Java program it throws a javax.net.ssl.SSLHandshakeException ("unable to find valid certification path to requested target"). So how do I tell Java that this certificate is OK with me? (I know there's a way to change the Java program to accept any certificate, but I don't want to go down that route. I want to test it just as it will happen in production, and I don't want to ignore unknown certificates in production.) I found that Java has a program called "keytool" that seems to be for managing this sort of thing, but it complains that the certificate file that FZ generated is not an "x.509" file. A posting from the FZ side said it was "PEM encoded". I have "openssl" here, which looks like it's perfect for converting between certificate formats, but I think my understanding of certificate formats is wrong because I'm not seeing anything obvious. My knowledge of security certificates is a bit shaky, so if my title is stupidly wrong, please help by fixing that. :-)

    Read the article

  • Is it possible for the Subversion Apache module to serve html files with an html content-type without using the svn:mime-type property?

    - by Martin Pain
    I am aware that if you set the svn:mime-type Subversion property on a .html file to text/html then when viewing the file in a browser through the Subversion module in Apache httpd it will be served with a Content-Type: text/html header, enabling the browser to render it as HTML rather than plain text. However, I am looking for a way to do this without using the svn:mime-type property. I'm aware that you can configure your svn client to automatically add the property - this is not what I want, as I do not want to ensure all users have these settings. I'm also aware that I could create a pre-commit hook that rejects the commit if the properties are not set, in order to force users to set the property - I might fall back to that, but I'm looking for something less intrusive. I'm also aware that I could use a post-commit hook to add the properties automatically on the server-side. I'd rather not do that (as users then have to update immediately after their commit, and it's not trivial to write) - I'm looking for a better alternative. Perhaps something with rewrite rules in the Apache server?

    Read the article

  • Terminal emulation has stopped working. Garbage escape chars

    - by oligofren
    To enable me to do some remote administration of our servers I started using a terminal emulation program called TouchTerm Pro on my iPhone. While not the smoothest experience, it has allowed me to leave my computer behind when going out of town, which makes the slightly painful experience worthwhile. As of late, the app unfortunately no longer works. Pressing up and down keys after logging on via ssh gives me garbage like ^[[A and ^[[B. Combinations with Ctrl - like you can see in the video - no longer works either. Writing full command lines and executing by the enter key works though. Being able to search my bash history was the difference between a usable app and endless frustration, so getting it to work is essential. The app has (of course) met its end of life, not getting updated anymore. I am not quite sure, which side (client or server) that has to be "fixed"/hacked to make the control sequences work again. But is there something I can do to make it work as intended? You can see a video of TouchTerm in operation here.

    Read the article

  • h264 inside FLV container vs. MP4 container?

    - by Gotys
    I am developing a tube site, and currently having issues with h264 format . By looking at youtube, I noticed they are putting their hi-def videos into mp4 container, so logically I did the same. Next, I installed mod_h264_streaming for lighttpd to make streaming and timeline-scrubbing work. Problem is, that large files (500mb+ at somewhat high resolution) take for EVER to even start buffering ( I read the flowplayer or other flash players need to download metadata first) . I moved the xmov atom to the front of the file with MP4Box (i tried qt-quickstart too) , and the problem didn't go away. Next I read online I need to interleave audio tracks, so I did that too. No change in slowness. So I tried putting the same exact h264 movie into an FLV container, and the playback buffering starts almost instantly - no slowness. So what am I missing here? Why would I choose MP4 container with mod_264_streaming module , which seems super-slow over a regular FLV container with lighttpd's built-in mod_flv_streaming ? Obviously many websites pick mp4 container , but I fail to understand why ? And as a side question - I tried using HTML5's VIDEO tag to try the same h264 MP4 movie, and the scrubbing is LIGHTING FAST! I looked into lighttpd's log file, and i noticed taht Flash Players append video.mp4?start=234 each time timeline is scrubbed, wheres HTML5's video tag does no such thing . Is this some sort of limitations of Flash ? Why Can't flash streaming be same fast as HTML5 streaming? Thanks to ALL who can help. I very much appreciate this community.

    Read the article

  • What Windows service binds a NIC to the network?

    - by Bigbio2002
    I have a server that takes several minutes for the NIC to bind itself to the network upon startup (it has a statically-configured IP). This causes DNS/WINS/Intersite Messaging to fail to start, since they're dependent on a network connection. While I'm still attempting to find a root cause to this issue (I've done firmware updates, checked for any odd drivers/services, no luck so far), but in the meantime, I want to adjust the load order of services to ensure that the NIC binds first before these services attempt to start. The only question is, which service is it? The server is running Server 2008 R2 and only has one NIC installed. (On a side note, there are two other small but odd problems occuring with the server. The server had the issue described in KB2298620, which I've fixed. The other problem occurs in Windows Server Backup. No events appear in the upper portion of the window, despite the fact that backups are running in the background. Whenever I attempt to modify the backup schedule, it gives me the error "Not enough storage is available to process this command" and appears to fail, when, in fact, it actually succeeds. These may be separate issues, but something tells me that some of these might share a common root cause.)

    Read the article

  • 1080p monitor: connected through VGA - perfect, HDMI - awful

    - by develroot
    When I connect my 23" monitor (1920x1080) to my pc through HDMI, I encourage some problems. It's not full screen That's it. There are ~1cm black borders on right and left side and ~0,5cm black borders on the top and the bottom of the monitor. That's pretty frustrating. I tried adjusting overscan, but I can't mannualy type the % of overscan that I need. I can only select between ex. 8 and 10% in AMD Vision Engine Control center, but what I need is 9%. Next, even if i select 10% and the image fits all the corners, but after log off all the settings are lost and I have to do it again and again. Text, images, everything looks blurry That surprised me a lot. Should'nt HDMI quality be better than VGA's one? When connected through HDMI, the text isn't readable. It's like a very low refresh rate, although i'm running at 60Hz. Also the text has something like little shadows, very very annoying. Are there any tips to get the same quality as with VGA, with HDMI ? (running on integrated ATI Radeon HD4200, which, appearently, is the best card I have ever seen in terms of integrated ones)

    Read the article

  • SSLVerifyClient optional with location-based exceptions

    - by Ian Dunn
    I have a site that requires authentication in order to access certain directories, but not others. (The "directories" are really just rewrite rules that all pass through /index.php) In order to authenticate, the user can either login with a standard username/password, or submit a client-side x509 certificate. So, Apache's vhost conf looks something like this: SSLCACertificateFile /etc/pki/CA/certs/redacted-ca.crt SSLOptions +ExportCertData +StdEnvVars SSLVerifyClient none SSLVerifyDepth 1 <LocationMatch "/(foo-one|foo-two|foo-three)"> SSLVerifyClient optional </LocationMatch> That works fine, but then large file uploads fail because of the behavior documented in bug 12355. The workaround for that is to set SSLVerifyClient require (or optional) as the default, so now the conf looks like this SSLCACertificateFile /etc/pki/CA/certs/redacted-ca.crt SSLOptions +ExportCertData +StdEnvVars SSLVerifyClient optional SSLVerifyDepth 1 <LocationMatch "/(bar-one|bar-two|bar-three)"> SSLVerifyClient none </LocationMatch> That fixes the upload problem, but the SSLVerifyClient none doesn't work for bar-one, bar-two, etc. Those directories are still prompted to present a certificate. Additionally, I also need the root URL to accessible without the user being prompted for a certificate. I'm afraid that will cancel out the workaround, though.

    Read the article

  • OARC's DNSSEC validating resolvers validate all my records but A records

    - by demize
    I have DNS set up with powerdns. It serves my DNS pretty well, and it AXFRs to other slaves. The slaves haven't yet updated to the most recent records, but that doesn't affect the validation, it would appear. Any record I can think of (AAAA, MX, TXT, even the CNAME for www) validates -- except for A records: dig @149.20.64.20 +dnssec www.demize95.com CNAME returns ;; flags: qr rd ra ad; QUERY: 1, ANSWER: 2, AUTHORITY: 5, ADDITIONAL: 7 while dig @149.20.64.20 +dnssec demize95.com A returns ;; flags: qr rd ra; QUERY: 1, ANSWER: 2, AUTHORITY: 5, ADDITIONAL: 7. The same happens with any other A record I have. I set up DNSSEC with pdnssec, and it does work for all the other records, but it's never validated for my A records. What's the problem here? Also, a side-note: I have to use ISC's DLV to create the chain of trust, since my domain registrar doesn't yet support sending the DS records to the com zone.

    Read the article

  • central apache log analysis of many hosts

    - by Jason Antman
    We have 30+ apache httpd servers, and are looking to perform analysis on the logs both for historical trending and near "real time" monitoring/alerting. I'm mainly interested in things like error rates (4xx/5xx), response time, overall request rate, etc. but it would also be very useful to pull out more compute-intensive statistics like unique client IPs and user agents per unit of time. I'm leaning towards building this as a centralized collector/server/storage, and am also considering the possibility of storing non-apache logs (i.e. general syslog, firewall logs, etc.) in the same system. Obviously a large part of this will probably have to be custom (at least the connection between pieces and the parsing/analysis we do), but I haven't been able to find much information on people who have done stuff like this, at least at shops smaller than Google/Facebook/etc. who can throw their log data into a hundred-node compute cluster and run Map/Reduce on it. The main things I'm looking for are: - All open source - Some way of collecting logs from apache machines that isn't too resource-intensive, and transports them relatively quickly over the network - Some way of storing them (NoSQL? key-value store?) on the backend, for a given amount of time (and then rolling them up into historical averages) - In the middle of this, a way of graphing in near-real-time (probably also with some statistical analysis on it) and hopefully alerting off of those graphs. Any suggestions/pointers/ideas, to either "products"/projects or descriptions of how other people do this would be greatly helpful. Unfortunately, we're not exactly a new-age-y devops shop, lots of old stuff, homogeneous infrastructure, and strained boxes.

    Read the article

< Previous Page | 599 600 601 602 603 604 605 606 607 608 609 610  | Next Page >