Search Results

Search found 19832 results on 794 pages for 'on screen keyboard'.

Page 604/794 | < Previous Page | 600 601 602 603 604 605 606 607 608 609 610 611  | Next Page >

• Smoothwall: How to stop live network traffic displayed in terminal?

  - by Jakobud

  For our network we are working on building a new firewall box and we just installed Smoothwall on it to test it out. When I start up the box, before the login prompt even appears, all of the live IP traffic is appearing in the terminal (source/destination IPs, MACs, Ports, etc). I wait for the boot sequence to finish, but all I see is this IP traffic. The login prompt never comes up. I finally get sick of waiting and press CTRL + C and it says "Entering Run Level 3" and then I get a login prompt finally. Once I login, the IP traffic continues to fly through the terminal even as I'm trying to type commands. How do I turn this stuff off? Is this the default setting for Smoothwall to have all this IP traffic going by on the screen? It essentially renders using the terminal to being useless.

  Read the article

• Windows 7 stopped booting

  - by jstawski

  I have a laptop which after shutdown it stopped booting. I tried repair, safe mode, and even start with Windows 7 Installation. The screen just goes blank with a mouse pointer that I can move around. I removed the harddrive from the laptop and connected it to my desktop using an External HD casing. The computer recognizes the disk, but it seems like it can't read it. If I go to My Computer it shows up, but it doesn't display usage information. When I double click on the drive it sits there as if it was loading something and eventually shows "G:\ is not accessible. The parameter is incorrect." Disk Management and Diskpart also take forever to load and when it does it shows the drive. My question, do you think this is a hardware problem or some corrupted sector? How can I try to fix the drive without formatting it? Thanks...

  Read the article

• Default Window Size and Positions

  - by muntoo

  I'm running Vista Home Premium 32-Bit, though I doubt that matters, in this case. So, how do you set the default windows size/positions? Is there a registry tweak for this? Going to Tools->Folder Options...->View Apply to Folders or Reset Folders doesn't work. So, whenever I open a new window to a random new folder I haven't opened before, I don't want it to take 75% of the screen. Is there any way I could make it open smaller? (So it opens correctly the first time.)

  Read the article

• Isn't Java a quite good choice for desktop applications?

  - by tactoth

  At present most applications are still developed with C++, painfully. Lack of portability, in compatible libraries, memory leaks, slow compilation, and poor productivity. Even if you pick only a single from these shortages, it's still a big headache. However the surprising truth is that C++ remains the first choice for desktop applications. Compared to C++ Java has lots of advantages. The success in server side development shows that the language itself is good, Swing is also thought to be as programmer friendly as the highly recognized QT framework (No, never say even a single word about MFC!). All the disadvantages of C++ listed above has a solution in Java. "Performance!", Well that might still be the problem but to my experience it's a slight problem. I'd been using Java to decode some screen video and generate key frames. The video has a duration of more than 1 hour. The time spent on an average machine is just 1 minute. With C++ I don't expect even faster speed. In recent days there are many news on the JIT performance improvements, that make us feel Java is gradually becoming very suitable for desktop development, without people realizing it. Isn't it?

  Read the article

• Fusion 3, Windows 7, frequent blue screens

  - by kenny6127

  Is anyone else seeing this problem? A solution would be great (hey, it's Windows, it's gonna blue screen, just gotta deal with it), but it's also nice to know if it's something specific to my configuration, or if a lot of folks are having the same issue. Here's the details: * MacBook Pro 15" unibody, 4 GB, 2.4 GHz, 10.5.8 * Fusion 3.0.1 * Windows 7 Pro, 32-bit (clean install, not migrated from Boot Camp or anything) Blue screens happen nearly every time the MBP cover is closed for a short period of time (< 3 minutes). If the cover is closed for a half hour or longer, the VM is fine. I'm guessing it might be related to sleep, but that's hard to tell, and the Windows crash dump logs are pretty useless. Thanks!

  Read the article

• Dual displays not working - NVidia - Ubuntu 12.4

  - by user75105

  Graphics Card: NVidia 460 GTX. Driver: NVIDIA accelerated graphics driver (version current) I have one DVI monitor, an old Dell LCD from 2005, and one VGA monitor, an Asus ML238H from 2010 whose HDMI port broke. The Asus is plugged into my graphics card's primary monitor slot and is the better monitor even though it is VGA but my computer defaults to the Dell. This happens when I boot as well; the loading screens, the motherboard brand image, etc. are all displayed on the Dell monitor until Windows loads. Then both monitors work. The same thing happened when I booted up Ubuntu 12.4 but I did not see the second monitor when the log-in screen popped up, nor did I when I logged in. I went to System Settings/Displays and my Asus monitor is not an option. I clicked Detect Displays and the Asus is not detected. I looked at the other questions regarding NVIDIA drivers and recalled my problems with Ubuntu a few years ago and decided to check the driver. I went to Additional Drivers to install the proprietary driver and it looks like it's installed and active but I'm still having this problem. There is another driver option, the post-release NVIDIA driver, but that does not fix the problem either. Also, under System Details/Graphics the graphics device is listed as Unknown, which might indicate that it is using an open source generic driver and not the proprietary NVidia driver. But under Additional Drivers it says that I am using the NVidia driver. Any help is appreciated.

  Read the article

• how do I fix 12.04 which has crashed after the latest update

  - by user70261

  I added a new drive to my system because the old one was full and stopped. I installed 12.04 at the same time, onto the new drive using a flash disk while off line. The system performs fine on 12.04 from the flash disk and it booted from the new drive OK and I was able to recover all my old data. The updater suggested that I update, so I went ahead and did so. At the end of which it wanted to reboot. I went ahead but on reboot I get to the log in prompt and then the whole system crashes. It tries to recover and then performs a bug report during which it tells me that a whole bunch of files are out of date (these would be the new ones I just updated!) and the screen goes black. Game over. I've tried to reboot several times ... same result. I can boot off the flash drive OK. How do I restore the system I had before the update, without over writing all my hard earned recovered data? Or how do I identify the "new updates" that are causing me grief?

  Read the article

• no boot option after install ubuntu 12.04 LTS using cd

  - by utamaku

  im facing a problem. after installing Ubuntu 12.04 LTS using boot from CD, when reboot there is no boot option to choose the OS. i directly log in to my Windows 7. before this im having an issue with the 'nomodeset' if not mistaken. after tick [x] on the nomodeset, i can install my Ubuntu, and stuck again at choosing the partition. so i had done 2 partitions for ubuntu, 1 partition for ubuntu ( ext3, mount /) and the other 1 for swap. then i can proceed until finished the installation. and after the system want to reboot. it take some times and just stuck at the screen doing nothing. not rebooting at all. i force to shutdown then restart again then directly go into windows 7 without boot option. in win7 the partitions for ubuntu is gone. i had tried the boot-repair thing and still doesn't help. it just show up the _ (terminal thing i guess). i typed boot repair and still the same. im using acer aspire 4736z. please anybody help me with this issue.

  Read the article

• Outlook hangs during startup by step &ldquo;loading profile&rdquo;

  - by Marko Apfel

  Problem Starting Outlook shows only the splash screen with comment “loading profile”. I could cancel the startup but restarting shows the same. I verified with Task Manager that no hidden outlook process is bother me. Solution Scanpst Normally with Outlook the tool “Microsoft Outlook Inbox Repair Tool” (scanpst.exe) is additionally installed. Some people could access it via Startmenu, but not me. My lovely Launchy found it under "C:\Program Files (x86)\Microsoft Office\Office14\SCANPST.EXE" Scanpst first ask you for the pst file which you would like to scan. I started with the first default offer: C:\Users\…\AppData\Local\Microsoft\Outlook\….ost And this brings up the information, that another application uses this file. Handle To investigate the causer Handle from Sysinternals is your friend in such cases. Start it from an administrative console and pipe the output to a file. handle > c:\temp\handle.txt Now you could open this file with the editor of your choose and search for the blocked file (your pst file). On top of the section you see the application which has a handle to this file opened (SfdcMsO1.exe). Task Manager Kill this application and start Outlook again. And voila – everything starts up fine … by me

  Read the article

• Will buy simple Cocos2D bubbles iPad game for private use (source)

  - by boliva

  Hi, First of all, sorry if this is the wrong place for posting this kind of request. IDK if is there already a marketplace on the stack community. I'm a fairly experienced iPhone/iPad developer with several Apps already published. I have a deep understanding of Objective-C and the Cocoa framework, as well as with the iPhone development tools. However, I have never used Cocos2d (or any other gaming engine for that matter) as I've mostly specialized in utilities/productivity Apps. I am in the urgent need of developing a really simple iPad game (for which I will provide all of the media assets - graphics and sounds) that needs to be deployed in about a week from now. Basically the game should allow the user to pop bubbles of different size and speed as they move from the bottom to the top of the screen. While I could take the time to read the documentation and start working on this game myself, I'm currently with a couple of other projects that I need to finish soon, so I would like to ask for the help of some other more experienced Cocos2D developer which could develop this game on its basic form for me. If you think you can help, please send me your quote, timing and, if possible, samples of previous work done with Cocos2D that would be similar to what I need. I can provide more detail upon request. Best and thank you all.

  Read the article

• Used mountmanager now Ubuntu hangs on boot

  - by fpghost

  I was using MountManager in Ubuntu 12.04 to set user permissions in mounting hard drives. I set each partititon to be mountable by everyone instead of admin only. Then I clicked Apply in the file menu and it gave me the message successfully updated. Upon restarting Ubuntu, just hangs on the splash screen and does not boot any further. Windows still boots fine. How can I fix these? please help thanks From LiveUSB: my fstab looks like: overlayfs / overlayfs rw 0 0 tmpfs /tmp tmpfs nosuid,nodev 0 0 /dev/sda5 swap swap defaults 0 0 /dev/sda7 swap swap defaults 0 0 Is this corrupted? Other things that may be helpful: blkid returns /dev/loop0: TYPE="squashfs" /dev/sda1: LABEL="System Reserved" UUID="0AF26C31F26C22E5" TYPE="ntfs" /dev/sda2: UUID="5E1C88E31C88B813" TYPE="ntfs" /dev/sda3: UUID="94B2BB7DB2BB6282" TYPE="ntfs" /dev/sda5: UUID="41b66b9a-2b48-45cf-b59d-cd50e41ec971" TYPE="swap" /dev/sda6: UUID="c73ca79e-4fa4-4bde-967e-670593736f6a" TYPE="ext4" /dev/sda7: UUID="c05d659f-103c-4444-9dc4-3121b9e081d6" TYPE="swap" /dev/sdb1: LABEL="PENDRIVE" UUID="1DE8-0A49" TYPE="vfat" and cat /proc/mounts rootfs / rootfs rw 0 0 sysfs /sys sysfs rw,nosuid,nodev,noexec,relatime 0 0 proc /proc proc rw,nosuid,nodev,noexec,relatime 0 0 udev /dev devtmpfs rw,relatime,size=1950000k,nr_inodes=206759,mode=755 0 0 devpts /dev/pts devpts rw,nosuid,noexec,relatime,gid=5,mode=620,ptmxmode=000 0 0 tmpfs /run tmpfs rw,nosuid,relatime,size=783056k,mode=755 0 0 /dev/sdb1 /cdrom vfat rw,relatime,fmask=0022,dmask=0022,codepage=cp437,iocharset=iso8859-1,shortname=mixed,erro rs=remount-ro 0 0 /dev/loop0 /rofs squashfs ro,noatime 0 0 tmpfs /cow tmpfs rw,noatime,mode=755 0 0 /cow / overlayfs rw,relatime,lowerdir=//filesystem.squashfs,upperdir=/cow 0 0 none /sys/fs/fuse/connections fusectl rw,relatime 0 0 none /sys/kernel/debug debugfs rw,relatime 0 0 none /sys/kernel/security securityfs rw,relatime 0 0 tmpfs /tmp tmpfs rw,nosuid,nodev,relatime 0 0 none /run/lock tmpfs rw,nosuid,nodev,noexec,relatime,size=5120k 0 0 none /run/shm tmpfs rw,nosuid,nodev,relatime 0 0 gvfs-fuse-daemon /home/ubuntu/.gvfs fuse.gvfs-fuse-daemon rw,nosuid,nodev,relatime,user_id=999,group_id=999 0 0

  Read the article

• Bringing Google Docs to the Desktop

  - by Jonathan Sampson

  Is there a stable way of accessing Google Docs (application) from my desktop without having to use a browser on Windows? On my accepted answer... While I did stipulate that I wanted to not use my browser, I didn't really mean I wanted to avoid browser technology. I meant I didn't want to open my browser, type in the web address for google docs, etc. TheTXI's answer required me to download/install nothing more than what I already had (Chrome) to acheive this. It created a desktop icon (similar to an application) that launches me right into my docs (similar to an application), without extra browser-items on the screen. This was an excellent suggestion, and won by virtue of parsimony.

  Read the article

• Mouse selects everything on its own

  - by meneer

  I have a strange problem that my mouse keeps selecting everything I point to. For example, if I open Rhythmbox, then at the top of the screen there is a text which says which song is playing. If I move my mouse over this text, then it will select this text; but I am not clicking. This behaviour does not happen in all programs. For example in Firefox I have no problem at all. Maybe it is Gtk related? Nautilus also behaves strangely; I cannot open files by clicking on them, I have to select and make a box around the file and then press enter to open it. If I click, then nothing happens. Similar problems also happen with other Gtk software. I think the problem might be related to touchscreen issues (I have a touchscreen). I run Gnome 3 on Ubuntu 12.04. I have a HP touchsmart 610 desktop computer. Any help is greatly appreciated. UPDATE: I just did a fresh reinstall, and I am 90% certain that it is related to the touchscreen drivers. Here is what happens when I reinstall. At first boot, so exactly after install, everything works fine, except the touchscreen: The touchscreen does not respond. I update ubuntu, because I installed from an old CD (CD with ub. 12.04). Then on next reboot I have touchscreen working , but the working touchscreen comes together with the mouse selecting everything on its own. SECOND QUESTION: Would anybody know how I could figure out what those touchscreen drivers are (so that I can disable them) ?

  Read the article

• how to override ckeditor events [migrated]

  - by joe

  I am new to ckeditor, I have hard time figuring this issue out. due to my html design; if I try to use the link editor dialog while my ckeditor is maximized, it just doesn't show up, I understand that ckeditor is the top most object in my html page and the link dialog comes underneath it. if now I bring ckeditor to its normal state I will be able to see and use the link dialog. my idea is to slightly override the link button click event as follows: if the editor is in full screen mode, bring it back to the normal state. and keep a flag somewhere so that when I close the link dialog, I can decide whether to bring back the ckeditor to a maximized mode again. now this is easy logic except that I do not know how to override the click event of the link button and keep it work as expected. here's what I have: $().ready(function () { var editor = $('#txa').ckeditor(); CKEDITOR.plugins.registered['link']= { init : function( editor ) { var command = editor.addCommand( 'link', { modes : { wysiwyg:1, source:1 }, exec : function( editor ) { if(editor.commands.maximize.state == 1 ){ alert("maximized"); //....here bring back the editor to UN-maximized state and let the link button event click do the default behavior } else { alert("normal state"); } //2 is normal state //1 is maximized } } ); editor.ui.addButton( 'link',{label : 'YOUR LABEL',command : 'link'}); } } }); html part to make the exemple work: <div> <textarea id="txa"> </textarea> </div> TO BE SHORT: http://jsfiddle.net/Q43QP/ if the editor is maximized, bring it to normal state then show the link dialog.

  Read the article

• ATI 9550 shows up as laptop in displays after update to 12.04, how do I fix this?

  - by D_H

  My guess is this is on here somewhere but I have searched and even tried looking at bunch of other similar video problems. My ATI 9550 shows up as laptop in displays after update to Ubuntu 12.04, how do I fix this? I found the following command on another post sudo lshw -c video. I get this when I run that command: *-display:0 UNCLAIMED description: VGA compatible controller product: RV350 AS [Radeon 9550] vendor: Hynix Semiconductor (Hyundai Electronics) physical id: 0 bus info: pci@0000:01:00.0 version: 00 width: 32 bits clock: 66MHz capabilities: agp agp-3.0 pm vga_controller bus_master cap_list configuration: latency=32 mingnt=8 resources: memory:c0000000-cfffffff ioport:c000(size=256) memory:e5000000-e500ffff memory:e4000000-e401ffff *-display:1 UNCLAIMED description: Display controller product: RV350 AS [Radeon 9550] (Secondary) vendor: Hynix Semiconductor (Hyundai Electronics) physical id: 0.1 bus info: pci@0000:01:00.1 version: 00 width: 32 bits clock: 66MHz capabilities: pm cap_list configuration: latency=32 mingnt=8 resources: memory:d0000000-dfffffff memory:e5010000-e501ffff" This way more info than the command showed in he other post and as far as I can tell right. This doesn't look to me like a laptop video would list? I also see this command xrandr, it reports this: xrandr: Failed to get size of gamma for output default Screen 0: minimum 640 x 480, current 1280 x 1024, maximum 1280 x 1024 default connected 1280x1024+0+0 0mm x 0mm 1280x1024 0.0* 1024x768 0.0 800x600 0.0 640x480 0.0 This is what shows in displays for resolutions but only the 1280x1024 works the others produce tearing in the video. Also I should have mentioned 3D mode does not work. I have tried ATI/AMD drivers the new one won't load and older ones won't work. I found out the newer driver no longer supports the 9550.

  Read the article

• With Bash + iTerm2, how to name tabs?

  - by Problemaniac

  In iTerm2 (Build 1.0.0.20120203), I typically open several tabs, each of which has split panes , and is about one particular theme of work, for example revision control, coding, managing files, mysql terminal work. I typically need to switch between 5 or more tabs in my work flow. It is sometimes hard to remember or tell which is which by looking at the content of the screen. I'd like to name the tabs somehow, so I can quickly tell which is which by quickly glancing. Is this possible?

  Read the article

• Problem with dual monitor

  - by Gernot

  I have a laptop with a nvidia optimus graka. I'm also useing a 23" external monitor. It never really worked... . After installation (it was a clean installation) the 23" monitor worked as it should, but the LCD from the laptop wasn't at the right resolution. And every time i tried to change this the PC crashed. Today i had a litle bit of time so i decided to solve this problem. I've tried a few things ( e.g. I've installed bumblebee with the nvidia driver and tested it. It's working...) but nothing solved my problem. Instead of getting any closer to the solution, it's gotten even more strange now... . Now, the display setting isn't recognizing a 2nd monitor at all. But I get on the 23" monitor (which is not shown in the display setting) a screen with the same resolution as the one on the laptop. The display settings looks so: Any help would be wonderful.

  Read the article

• Reason why Windows can't be installed on Ubuntu , Any Help though?

  - by Terzuz

  Well I got my Windows Vista .iso file , I put it on my USB Drive , Extracted , Then I restarted and went to "Boot Device Options" Clicked "Generic USB" (What I labeled when I formatted) Then it stood on a black screen for 15 minutes , Then just went to Ubuntu , Now I found out exactly what happened Why Windows WONT work on Ubuntu is a simple reason Not if you save it in NFTS Format or MSDOS (Both Windows Formats) , Not if you use anything special , This even applies to the Ubuntu downloader , One specific reason that I just noticed , Since WINE (Windows Application Loader) can't run while you click the USB , You can't open the Setup.exe file needed to install the Operating System , That means you can not install it at all if it is a .exe installer file , Then what can we do? Only other way is to make a partition with GParted , Put a partition , then install WINE , Then run your Windows Setup.exe file , Then Wine will load it up! Why not to open Setup.exe before you make a partition - Simple , It WONT WORK! I have tried , It says you need __ Amount of space and can be put on any partition , Yeah , Any partition NOT BEING USED Here is where I need your help! - I want to make a partition but they all show as locked when I open GParted , So How am I supposed to open them up? Get a hammer and tell HP my laptop didn't want to open its partitions? Nope , I need some help on how to unlock the partitions or what to do , Thank you in advance PS- If I could , I would put a bounty to this but I do not have enough reputation!

  Read the article

• Motherboard with embedded hdmi problems with Windows 8 Consumer Preview (64bit)

  - by duluca

  I'm specifically referring to GIGABYTE GA-E7AUM-DS2H LGA 775 NVIDIA GeForce 9400 HDMI Micro ATX with a Core 2 Duo chip. This computer is connected to a Sharp Aquous TV using HDMI. It all worked fine with Windows 7 64 bit. In Device Manager I see GeForce 9400 and have installed the latest NVidia drivers (295.73 WHQL). However, when I click on the change the screen resolution to 1920x1080, I see that Windows 8 thinks that it's using some other graphics card with Microsoft Basic Display Driver. This was made clear, when I tried to launch the NVidia tools and it claimed that the current monitor (in this case my TV) wasn't attached to the GeForce 9400 card. In Device Manager, there's a "Coprocessor" and "Unknown device" without drivers, but I've no idea what they are. I've run the original CD that the motherboard came with no success. Any ideas?

  Read the article

• SSRS report font problem on deployed reports

  - by Cylindric

  I have created several reports for my SQL Server Reporting Services 2008 SP2 server, using Visual Studio 2008 on my machine. The reports objects all use Arial as their font, in various sizes and weights. When I test them in VS, all looks fine, and I can print them and export them okay. When I deploy them to the server though, they look fine on-screen and if exported to PDF, but when printed directly from the web viewer, the fonts seem to go 'missing' - all the characters are squashed together as if there was a slight negative character-offset.

  Read the article

• Operating system not found after downloading skin pack

  - by 8BitSensei

  My brother has downloaded a executable file from Skin Pack — I believe it was the Mountain Lion IO6 skin pack. He's using an Acer Aspire 553G. And now his operating system won't start (Windows 7). It gets to the BIOS and then goes to load up the OS but the screen goes blank and it just goes back to the BIOS over and over again. He decided to play with the bootup settings and tried different options and got the error message "Operating System not found." Does anyone have any idea how to solve this?

  Read the article

• Why is text on my TV monitor all grainy?

  - by searchfgold6789

  I have successfully installed the Catalyst drivers and hooked up my 1080p TV to the Radeon HD 5750's HDMI port and now it is working. There only seems to be one issue - most images appear OK, at least to my eyes, but text is grainy and difficult to read (not sure how well it can be seen in the picture): It works fine with a smaller screen, and hopefully you can see it with the new pictures which are only slightly better, but images are rendered a little funny too. Changing antialiasing does nothing and changing the refresh rate only makes a slight change if any. The small monitor I have works fine. Smaller resolutions such as 1024x768 look OK but are the wrong aspect ratio. I have tried renaming the input mode on the TV to "PC", and that helped... a little bit. Also, I tried a different PC with the same result. Messing around extensively with the ATI Catalyst Control Center also did not help. I am wondering if there is anything else I can try to increase the quality so it is more usable.

  Read the article

• after upgrade from 10.04 to 12.04 cannot boot with linux 3.2.0-24-generic-pae

  - by Ricardo

  After upgrade from 10.04 to 12.04, I cannot boot with linux 3.2.0-24-generic-pae: process gets frozen in a xubuntu initialization screen (I had qimo installed). If I try the recovery mode (with the same Linux version), booting freezes after this message: Begin: Mounting root file system. If in grub menu I choose Previous Linux versions, I can boot using Linux 2.6.32-41-generic-pae. But once logged in, some things don't seem to work (apt-get update fails, update manager fails, HID menu does not provide suggestions...) (to be honest, I have no idea whether this is part of the bigger issue) Reading in Ask Ubuntu through apparently similar problems, I decided to follow some advices: got boot-repair and run it. The problem remains & I got this report. I also run as root in terminal $ sudo update-initramfs -u and this is what I got: update-initramfs: Generating /boot/initrd.img-3.2.0-24-generic-pae cryptsetup: WARNING: failed to detect canonical device of /dev/sda1 cryptsetup: WARNING: could not determine root device from /etc/fstab /tmp/mkinitramfs_EIDlHy/scripts/classmate-bottom/45xconfig: 9: .: Can't open /scripts/casper-functions What else? My pc is Intel® Core™ i7 CPU 870 @ 2.93GHz × 8, graphs is GeForce 8400 GS/PCIe/SSE2, memory is 7,8 GiB. I have two questions: Is this a bug in the newest kernel I should report? Is there anything I can do appart from a fresh install?

  Read the article

• How do I create an efficient long, pannable, sprite-animated scene in a Windows Store game?

  - by Groo

  I am creating my first Windows Store application in XAML, and I cannot seem to find a proper example for the requirements I have. The basic idea of the app is to have a large scrollable canvas which would lazily start animating visible parts of the view as soon as user stops panning over a certain content (with some audio played also): My original idea was to use a StackPanel to add a bunch of custom controls, each of which would then animate itself once visible (with a short delay), but I have a couple of concerns: If the entire canvas is ~50 screen widths wide, is it feasible to load all content at the beginning, or do I need to plan doing some lazy loading during scrolling? For example, when I select a certain region in the Bing Travel app, it seems to lazily load tiles as I scroll it towards the end. Since content is stretched 100% vertically, and these animations are vectorized to be resolution independent, I am not sure if XAML (CompositionTarget) will be able to handle this, or I have to go for DirectX (MonoGame or C++) to get rid of flicker. Even better, is there an example for Windows 8 which uses a 100% vertically sized GridView with custom animated controls inside?

  Read the article

• Change spacing of icons in Indicator Applet Complete, preferably by editing a config file?

  - by PeaTearGriffin

  Changing icon spacing within Application Indicator Complete. If at all possible, I'd like to space them with about 1-3px between each one. https://launchpad.net/indicator-applet [Website] I'm using 12.04, and in GNOME Classic (No Effects). I'm working from a netbook (1024x600), and am trying to fit everything into one panel for the sake of screen conservation. Ironically, my netbook is often without reliable net access, and so a way to simply edit a config file or the like would be ideal, as opposed to downloading patches, modified packages, etc., but anything would be helpful. Even pointing me in the direction of how to start rebuilding the indicator to meet my needs (if need-be) would be welcome. Does anyone know of a method that would serve my purpose? EDIT: I've downloaded v0.4.93 from the site mentioned above, and took a look inside the archive. Couldn't find anything clearly alluding to object placement/size and such. Maybe just a pointer on where to find those params would do? EDIT 2: Some more info on my WM/DE: I'm pretty sure GNOME classic is gtk2 not gtk3, and equally sure my windows manager is metacity, as opposed to compiz. "equally sure" meaning i could be horribly wrong, but when I edit the metacity css file for my theme (which ive switched to "Adawaita"), it takes effect after logout/login. My inability to modify the spacing persists. Im gonna see if i can contact someone involved in its dev to get their input, will post results here if fruitful.

  Read the article

< Previous Page | 600 601 602 603 604 605 606 607 608 609 610 611  | Next Page >