Search Results

Search found 87875 results on 3515 pages for 'server pool'.

Page 606/3515 | < Previous Page | 602 603 604 605 606 607 608 609 610 611 612 613  | Next Page >

• Proliant RAID 1 Rebuild Questions

  - by Nicholas

  I have a HP Proliant ML350 G5 server that experienced a power supply failure overnight. The power supply was replaced but unfortunately it got restarted with only 1 disk in the RAID 1 set plugged in. (The raid controller is the build in E200i). The raid BIOS then said on start-up that it had entered Interim Recovery Mode. However I would have expected it to still start up with only the 1 drive. The bios however says that it cannot find a C: drive and enters a reboot loop polling the other boot devices. First question is, is this normal behaviour not to start up on 1 disk? The second drive was then plugged in (all drives are ok) and the raid bios started an automatic rebuild on that disk. This appears to be a background process as there is no progress shown. However based on the light flashing it looks like it is working. My second question is how long will this rebuild take? (36GB 15K SAS drive). I cannot see any error messages and it looks like it is rebuilding the drive ok, but the computer still will not start-up. It still says during the boot up process that the C: drive is not found. If I wait for the rebuild to finish, is it likely to fix itself and find the C: drive? Or is there some other problem here?

  Read the article

• Troubleshooting transient Windows I/O "The parameter is incorrect." errors

  - by Kevin

  We have a set of .Net 2.0 applications running on Windows 2003 servers which have started experiencing transient "The parameter is incorrect." Windows I/O errors. These errors always happen accessing a file share on a SAN. The fact that this error has happened with multiple applications and multiple servers leads me to believe that this is an infrastructure issue of some sort. The applications all run under the same domain account. When the errors occur they generally will resolve themselves within a few minutes. I can log in to the application server once the error starts occurring and access the file share myself with no problems. I have looked at the Windows event logs and haven't found anything useful. Due to the generic nature of "The parameter is incorrect.", I am looking for additional troubleshooting suggestions for this error. A sample stack trace is below. Note that while this example was during a directory creation operation, when the problem is occurring, this exception is thrown for any file system operations on the share. Exception 1: System.IO.IOException Message: The parameter is incorrect. Method: Void WinIOError(Int32, System.String) Source: mscorlib Stack Trace: at System.IO.__Error.WinIOError(Int32 errorCode, String maybeFullPath) at System.IO.Directory.InternalCreateDirectory(String fullPath, String path, DirectorySecurity dirSecurity) at System.IO.Directory.CreateDirectory(String path, DirectorySecurity directorySecurity) at System.IO.Directory.CreateDirectory(String path)

  Read the article

• Process runs slower as a scheduled task than it does interactively

  - by Charlie

  I have a scheduled task which is very CPU- and IO-intensive, and takes about four hours to run (building source code, if you're curious). The task is a Powershell script which spawns various sub-processes to do its work. When I run the same process interactively from a Powershell prompt, as the same user account, it runs in about two and a half hours. The task is running on Windows Server 2008 R2. What I want to know is why it takes so much longer to run as a scheduled task - more than an hour longer. One thing I noticed is that the task scheduler runs at Below-Normal priority, so when my task starts, it inherits the same lowered priority. However, I've updated the script to set the Powershell process priority back to Normal, and it still takes just as long. Anybody have an idea what could be different between the two scenarios? I've ruled out differences in processor and IO load - this task is the only thing the system is used for, so there's nothing else running that could be competing for resources.

  Read the article

• Error installing dotnet framework 3.5 SP1 on windows 2008

  - by Shiraz Bhaiji

  Getting a really wierd error. One of the developers tried to install Windows 2008 as a Virtual PC. He has also run windows update. When he tries to install dotnet framework 3.5 SP1 he gets the following error: [09/25/09,12:48:26] Microsoft .NET Framework 2.0SP1 (CBS): [2] Error: Installation failed for component Microsoft .NET Framework 2.0SP1 (CBS). MSI returned error code 1 [09/25/09,12:48:34] WapUI: [2] DepCheck indicates Microsoft .NET Framework 2.0SP1 (CBS) is not installed. I though that dotnet framework was installed automatically with windows update on windows 2008. So how could it be missing? Thanks. Shiraz EDIT We also have the same problem on a VPC that had dotnet framework 3.5 installed and working OK. I have tried removing all versions of dotnet framework, using the following clean up tool: http://blogs.msdn.com/astebner/pages/8904493.aspx I then downloaded and tried to install dotnet framework 2.0 SP1, from this location: http://www.microsoft.com/Downloads/details.aspx?familyid=79BC3B77-E02C-4AD3-AACF-A7633F706BA5&displaylang=en The error I now get is: "This product is not supported on the Vista Operating System" EDIT Thanks for the help, have given an up vote to everyone. In the end our problem was that we had installed Windows Server 2008 from an older ISO image, on this everything worked fine untill we tried to install framework 3.5 SP1. We reinstalled Windows from a new image, and it worked OK.

  Read the article

• C# Sockets and Proxy Servers

  - by Tristan

  Hi Guys, I'm trying to make some source code for a library I downloaded work with a proxy server. The library uses sockets to connect to a server but if the client using the library is behind a proxy server it can't connect. Does anyone know how I can modify the socket to be able to connect to the server through a proxy server? I really want to just do this with the sockets in the library without having to change too much code to use WebRequest or something similar Cheers -Tristan

  Read the article

• Can Sql Server BULK INSERT read from a named pipe/fifo?

  - by Peter

  Is it possible for BULK INSERT/bcp to read from a named pipe, fifo-style? That is, rather than reading from a real text file, can BULK INSERT/bcp be made to read from a named pipe which is on the write end of another process? For example: create named pipe unzip file to named pipe read from named pipe with bcp or BULK INSERT or: create 4 named pipes split 1 file into 4 streams, writing each stream to a separate named pipe read from 4 named pipes into 4 tables w/ bcp or BULK INSERT The closest I've found was this fellow (site now unreachable), who managed to write to a named pipe w/ bcp, with a his own utility and usage like so: start /MIN ZipPipe authors_pipe authors.txt.gz 9 bcp pubs..authors out \\.\pipe\authors_pipe -T -n But he couldn't get the reverse to work. So before I head off on a fool's errand, I'm wondering whether it's fundamentally possible to read from a named pipe w/ BULK INSERT or bcp. And if it is possible, how would one set it up? Would NamedPipeServerStream or something else in the .NET System.IO.Pipes namespace be adequate? eg, an example using Powershell: [reflection.Assembly]::LoadWithPartialName("system.core") $pipe = New-Object system.IO.Pipes.NamedPipeServerStream("Bob") And then....what?

  Read the article

• I need advice about iscsi + zfs(or ntfs) + windows 2008 clustering

  - by Fatih

  I want to setup a storage farm with iSCSI. I have 2 cluster node machine, 1 iscsi target machine that has 8TB installed as RAID 10. The capacity is now 8TB, but I'll upgrade the capacity in future. Let's say, I installed clusters as file server, and I connected these servers to iscsi target, then I shared 8TB capacity as an only folder to the windows users. Users now see only a folder whose capacity is 8TB. But if I want to add another 8TB to expand the main capacity, the users must not see the second folder for this new 8 TB. The users must see only a folder as before, but this time this folder's capacity expanded to 16TB. And so on, if I add another 8TB, the users must deal with only a folder. For this purpose, I've learnt that ZFS can expand its size without a problem. So if I use ZFS as a file system on iSCSI luns, how can the cluster machines see the ZFS. Because the cluster machines have windows 2008. Is there another way to expand the size of shared folder without a problem? Does ntfs support it?

  Read the article

• How to handle encrypted column in SQL Server Database in LINQ to SQL?

  - by Raja

  Hi Guys, We are in the process of encrypting all the SSN columns (had to do it now due to security audit). We already built the DBML and now we have to change it. Can you guys let me know if there is a good way of handling this in LINQ to SQL? We use stored procedures for Insert, Update and Delete but use LINQ to SQL for all our selects (ease of use). Do I have to change the format for those tables with SSN or Is there any other manner we can handle it in LINQ to SQL? Thanks, Raja

  Read the article

• Giving Select Windows Domain Users Symbolic Link Privilege

  - by fp0n

  I would like to setup select users on our domain to have the ability to create symbolic links on local NTFS drives and network shares without needing to run as Administrator, as part of an application with will call the CreateSymbolicLink() API directly. The default configuration for our users is to be Administrator of their computer and I think I am fighting UAC to make the privileges work the way that I want because of that. I found this link on MSDN: http://social.msdn.microsoft.com/Forums/en-SG/windowssdk/thread/fa504848-a5ea-4e84-99b7-0eb4e469cbef which describes the interaction between the SeCreateSymbolicLinkPrivilege, UAC and a domain but really does not have a solution. Here's the three options I've come up with: 1) Create a new group, give the SeCreateSymbolicLinkPrivilege to the group and assign users to the group 2) Give each individual user (2 now, more later) the privilege 3) Give the privilege to the default User group which opens it up to all Users 4) Change config so Users are not Admins by default (probably would work but not likely) Based on my testing, only 3 works for me and that is the least desirable but I've only got a local server to test with, not a domain. I need to recommend to the admin how to set this up and also have something that we can easily explain to other users of our application that are on their own domain or not on a domain. The other option seems to be to create a Service that runs with a SYSTEM account that creates the links for the application but I'd rather not go that route. Thanks.

  Read the article

• SSI includes not working on Debian with Apache

  - by Mike

  I'm trying to get SSI to work on Debian running Apache, however the .shtml files are not being parsed. From a PHP file with phpinfo() I can see that the following show up in the loaded modules section: mod_mime_xattr mod_mime mod_mime_magic In /etc/apache2/mods-enabled/mime.conf I have (among other things): AddType text/html .shtml AddOutputFilter INCLUDES .shtml In /etc/apache2/sites-enabled/domain.com.conf (for the virtual host in question) I have: <Directory /home/username/public_html> Options +Includes allow from all AllowOverride All </Directory> and for good measure, I added the following as well: <Directory /> Options +Includes </directory> In the user's .htaccess file, I tried adding: Options +Includes AddType text/html shtml AddHandler server-parsed shtml Nothing seems to work. How can I even debug this? Edit: Here is the output of ls /etc/apache2/mods-enabled/ in case this helps actions.conf dav_svn.load proxy_balancer.load actions.load deflate.conf proxy.conf alias.conf deflate.load proxy_connect.load alias.load dir.conf proxy_http.load auth_basic.load dir.load proxy.load auth_digest.load env.load python.load authn_file.load fcgid.conf reqtimeout.conf authz_default.load fcgid.load reqtimeout.load authz_groupfile.load mime.conf rewrite.load authz_host.load mime.load ruby.load authz_user.load mime_magic.conf setenvif.conf autoindex.conf mime_magic.load setenvif.load autoindex.load mime-xattr.load ssl.conf cgi.load negotiation.conf ssl.load dav_fs.conf negotiation.load status.conf dav_fs.load php5.conf status.load dav.load php5.load suexec.load dav_svn.conf proxy_balancer.conf

  Read the article

• Is it possible to make a non-nullable column nullable when used in a view? (sql server)

  - by Matt

  Hi, To start off I have two tables, PersonNames and PersonNameVariations. When a name is searched, it finds the closest name to one of the ones available in PersonNames and records it in the PersonNameVariations table if it's not already in there. I am using a stored proc to search the PersonNames for a passed in PersonNameVariationand return the information on both the PersonName found and the PersonNameVariation that was compared to it. Since I am using the Entity Framework, I needed return a complex type in the Import Function but for some reason it says my current framework doesn't support it. My last option was to use an Entity to return in my stored proc instead. The result that I needed back is the information on both the PersonName that was found and the PersonNameVariation that was recorded. Since I cannot return both entities, I created a view PersonSearchVariationInfo and added it into my Entity Framework in order to use it as the entity to return. The problem is that the search will not always return a Person Name match. It needs to be able to return only the PersonNameVariation data in some cases, meaning that all the fields in the PersonSearchVariationInfo pertaining to PersonName need to be nullable. How can I take my view and make some of the fields nullable? When I do it directly in the Entity Framework I get a mapping error: Error 4 Error 3031: Problem in mapping fragments starting at line 1202:Non-nullable column myproject_vw_PersonSearchVariationInfo.DateAdded in table myproject_vw_PersonSearchVariationInfo is mapped to a nullable entity property. C:\Users\Administrator\Documents\Visual Studio 2010\Projects\MyProject\MyProject.Domain\EntityFramework\MyProjectDBEntities.edmx 1203 15 MyProject.Domain Anyone have any ideas? Thanks, Matt

  Read the article

• Enable RemoteApp Full Desktop programmatically

  - by Scott Chamberlain

  I am writing a powershell script to set up some HyperV VM's however there is one step I am having trouble automating. How do I check the box to allow Remote desktop access from the RemoteApp settings programmatically? I can set up all of my customizations I need by doing #build the secrity descriptor so the desktop only shows up for people who should be allowed to see it $remoteDesktopUsersSid = New-Object System.Security.Principal.SecurityIdentifier($remoteDesktopUsersGroup.objectSid[0],0) $aceTemplet = 'O:WDG:WDD:ARP(A;CIOI;CCLCSWLORCGR;;;{0})' $securityDescriptor = $aceTemplet -f $remoteDesktopUsersSid #get a copy of the WMI instance $tsRemoteDesktop = Get-WmiObject -Namespace root\CIMV2\TerminalServices -Class Win32_TSRemoteDesktop #set settings $tsRemoteDesktop.Name = $ServerDisplayName $tsRemoteDesktop.SecurityDescriptor = $securityDescriptor $tsRemoteDesktop.IconPath = $IconPath $tsRemoteDesktop.IconIndex = $IconIndex #push settings back to server Set-WmiInstance -InputObject $tsRemoteDesktop -PutType UpdateOnly however the instance of that WMI object does not exist until after you have the above box checked. I attempted to use Set-WmiInstance to instantiate and set the settings at the same time but I keep getting errors like: Set-WmiInstance : At line:53 char:16 + Set-WmiInstance <<<< -Namespace root\CIMV2\TerminalServices -Class Win32_TSRemoteDesktop -Arguments @{Alias='TSRemoteDesktop';Name=$ServerDisplayName;ShowInPortal=$true;SecurityDescriptor=$securityDescriptor} + CategoryInfo : NotSpecified: (:) [Set-WmiInstance], ArgumentException + FullyQualifiedErrorId : System.ArgumentException,Microsoft.PowerShell.Commands.SetWmiInstance (also after running the command and getting the error it will delete the instance of Win32_TSRemoteDesktop if it already exited and un-check the box in the properties setting) Is there any way to programmatically check that box or can anyone help with why Set-WmiInstance throws that error?

  Read the article

• Strange performance issue with Dell R7610 and LSI 2208 RAID controller

  - by GregC

  Connecting controller to any of the three PCIe x16 slots yield choppy read performance around 750 MB/sec Lowly PCIe x4 slot yields steady 1.2 GB/sec read Given same files, same Windows Server 2008 R2 OS, same RAID6 24-disk Seagate ES.2 3TB array on LSI 9286-8e, same Dell R7610 Precision Workstation with A03 BIOS, same W5000 graphics card (no other cards), same settings etc. I see super-low CPU utilization in both cases. SiSoft Sandra reports x8 at 5GT/sec in x16 slot, and x4 at 5GT/sec in x4 slot, as expected. I'd like to be able to rely on the sheer speed of x16 slots. What gives? What can I try? Any ideas? Please assist Cross-posted from http://en.community.dell.com/support-forums/desktop/f/3514/t/19526990.aspx Follow-up information We did some more performance testing with reading from 8 SSDs, connected directly (without an expander chip). This means that both SAS cables were utilized. We saw nearly double performance, but it varied from run to run: {2.0, 1.8, 1.6, and 1.4 GB/sec were observed, then performance jumped back up to 2.0}. The SSD RAID0 tests were conducted in a x16 PCIe slot, all other variables kept the same. It seems to me that we were getting double the performance of HDD-based RAID6 array. Just for reference: maximum possible read burst speed over single channel of SAS 6Gb/sec is 570 MB/sec due to 8b/10b encoding and protocol limitations (SAS cable provides four such channels).

  Read the article

• Problems configuring DB2 CLI/ODBC System DSN ODBC Data Source Administrator

  - by Komyg

  I am trying to create a System DSN ODBC connection to a DB2 9.5 database, but I am getting a very strange problem. I've looked through the internet and found the following page that has some instructions on how I should proceed: http://www.ryslander.com/how-to-install-and-configure-db2-odbc-driver/. I followed these instructions and I am able to create a new System DSN, however when I try to configure it it seems as if my configurations don't work at all. For example, when I click on the "Configure" button on my System DSN and I add a TCP/IP protocol configuration on the "Advanced Settings" tab and click "Ok", no errors appear, but when I click on "Configure" again my TCP/IP setting has vanished. This happened to all my other configurations, such as database name, username, password etc. Could you help me figure out what I am doing wrong? Note: my user is in the administrator group and I am using a Windows Server 2008 R2 Enterprise x64. UPDATE I managed to create a User DSN and connect to the database. However the problem with the System DSN remains.

  Read the article

• Hyper-V virtual machine can't be migrated to a specific host in the cluster

  - by Massimo

  I have a three-node Hyper-V cluster running on Windows Server 2008 R2 which is working quite flawlessly: there are no errors, live migration works, all hosts can and will happily run all virtual machines, and so on. But one specific virtual machinee is trying to make me go mad: it works on two nodes of the cluster, but not on the third one. Whenever I try to move the VM to that node, be it in a live migration or with the VM powered off, it always fails. In the event log of the host these events are logged: Source: Hyper-V-VMMS Event ID: 16300 Cannot load a virtual machine configuration: General access denied error (0x80070005) (Virtual machine ID <GUID>) Source: Hyper-V-VMMS Evend ID: 20100 The Virtual Machine Management Service failed to register the configuration for the virtual machine '<GUID>' at 'C:\ClusterStorage\<PATH>\<VM>': General access denied error (0x80070005) Source: Hyper-V-High-Availability Event ID: 21102 'Virtual Machine Configuration <VM>' failed to register the virtual machine with the virtual machine management service. All other VMs can be moved to/from the offending host, and the offending VM can be moved between the other two hosts. Also, this is not a storage problem, because there are other VMs in the same cluster volume, and the host has no troubles running them. What's going on here?

  Read the article

• PPTP Client setup, Fedora 17

  - by Suarez Romina

  I am trying to connect to hidemyass.com VPN services via PPTP, but I am having issues understanding why it isn't working, since I don't get a warning or fatal error and my IP remains the same. This is how i create the connection: [root@lasvegas-nv-datacenter ~]# pptpsetup --create TUNNELNAME --server 199.58.165.20 --username MYUSERNAME --password MYPASSWORD --encrypt --start And this is the output: Using interface ppp0 Connect: ppp0 <-- /dev/pts/1 CHAP authentication succeeded MPPE 128-bit stateless compression enabled local IP address 10.200.21.14 remote IP address 10.200.20.1 After that, I check the log and this is what i get: [root@lasvegas-nv-datacenter ~]# tail -f /var/log/messages Aug 24 11:25:33 lasvegas-nv-datacenter pptp[3892]: anon log[ctrlp_rep:pptp_ctrl.c:254]: Sent control packet type is 1 'Start-Control-Connection-Request' Aug 24 11:25:33 lasvegas-nv-datacenter pptp[3892]: anon log[ctrlp_disp:pptp_ctrl.c:754]: Received Start Control Connection Reply Aug 24 11:25:33 lasvegas-nv-datacenter pptp[3892]: anon log[ctrlp_disp:pptp_ctrl.c:788]: Client connection established. Aug 24 11:25:34 lasvegas-nv-datacenter pptp[3892]: anon log[ctrlp_rep:pptp_ctrl.c:254]: Sent control packet type is 7 'Outgoing-Call-Request' Aug 24 11:25:34 lasvegas-nv-datacenter pptp[3892]: anon log[ctrlp_disp:pptp_ctrl.c:873]: Received Outgoing Call Reply. Aug 24 11:25:34 lasvegas-nv-datacenter pptp[3892]: anon log[ctrlp_disp:pptp_ctrl.c:912]: Outgoing call established (call ID 0, peer's call ID 20096). Aug 24 11:25:38 lasvegas-nv-datacenter pppd[3884]: CHAP authentication succeeded Aug 24 11:25:38 lasvegas-nv-datacenter pppd[3884]: MPPE 128-bit stateless compression enabled Aug 24 11:25:38 lasvegas-nv-datacenter pppd[3884]: local IP address 10.200.21.14 Aug 24 11:25:38 lasvegas-nv-datacenter pppd[3884]: remote IP address 10.200.20.1 Can someone help me? Basically, i Ieed to connect to the VPN and have my IP changed after the connection. I read a lot of guides but still cannot understand why I don't get a connection.

  Read the article

• Improving Performance of RDP Over LAN

  - by Jared Brown

  Architecture: A deployment of 6 new HP thin clients (Windows XP Embedded) with TCP/IP access to several new HP servers (Windows 2003 Server). Each thin client is connected over fiber optic to a Gigabit Cisco switch, which the servers are connected to. There are 10/100 Ethernet to fiber converter boxes on each end of the fiber cables. Problem: Noticeable lag over RDP while using the Unigraphics CAD package. 3D models take .5 to 1 second to respond to mouse actions. Other Details: Network throughput on each thin client's RDP session is 7288 kbps. RDP connection settings - color setting: 15k, all themes, etc. turned off. Local and remote system performance stats are well within norms (CPU, Memory, and Network). Question: Are there newer versions of terminal services or RDP I can use on my existing OSes? Are there compression algorithms, etc. that are well suited for a high-bandwidth LAN? Are there valid alternatives that will yield higher performance (i.e. UltraVNC with drivers installed)? Are there TCP/IP tuning options I can exploit?

  Read the article

• What's the risk of running a Domain Controller so that it is accessible from the internet?

  - by Adrian Grigore

  I have three remote dedicated web servers at different webhosts. Adding them to a common domain would make a lot of administration tasks much easier. Since two of the servers are running Windows 2008 R2 Standard, I thought about promoting them to Domain Controllers in order to set up the windows domain. There's another thread at Serverfault that recommends this. At the same time I've read a lot of times on different websites that this is not a good idea because an domain controller should always be behind a firewall LAN. But I can't set up something like this because I don't have a LAN with a static IP accessible from the internet. In fact I don't even have a windows server in my LAN. What I have not found out is why exposing a DC to the Internet would be bad idea. The only risk I can see is that if someone penetrates one of my webservers, it should be much easier to penetrate the others as well. But as far as I can see that's the worst case scenario since I am only going my web servers to that domain, not any computers from my local network. Is this the only downside or does it also make it easier to penetrate one of my web servers in the first place? Thanks, Adrian

  Read the article

• Solr error; JNDI not configured for solr; Anybody know what this means?

  - by Camran

  I am installing solr on my VPS (Ubuntu 9.10) via PuTTY. First, I thought about installing Solr with Tomcat, but then after installing tomcat, I changed my mind and went for the Jetty which comes with Solr. Now that I have setup everything on my Server, and try to start the "start.jar" file, I get some errors... Here is some text from the log file: 2010-05-29 00:22:42.074::INFO: jetty-6.1.3 2010-05-29 00:22:42.134::INFO: Extract jar:file:/var/www/webapps/solr.war!/ to /var/www/work/Jetty_0_0_0_0_8983_solr.war__solr__k1kf17/webapp May 29, 2010 12:22:42 AM org.apache.solr.core.SolrResourceLoader locateSolrHome INFO: JNDI not configured for solr (NoInitialContextEx) May 29, 2010 12:22:42 AM org.apache.solr.core.SolrResourceLoader locateSolrHome INFO: solr home defaulted to 'solr/' (could not find system property or JNDI) May 29, 2010 12:22:42 AM org.apache.solr.core.SolrResourceLoader <init> INFO: Solr home set to 'solr/' May 29, 2010 12:22:42 AM org.apache.solr.servlet.SolrDispatchFilter init INFO: SolrDispatchFilter.init() May 29, 2010 12:22:42 AM org.apache.solr.core.SolrResourceLoader locateSolrHome INFO: JNDI not configured for solr (NoInitialContextEx) May 29, 2010 12:22:42 AM org.apache.solr.core.SolrResourceLoader locateSolrHome INFO: solr home defaulted to 'solr/' (could not find system property or JNDI) May 29, 2010 12:22:42 AM org.apache.solr.core.CoreContainer$Initializer initialize INFO: looking for solr.xml: /var/www/solr/solr.xml May 29, 2010 12:22:42 AM org.apache.solr.core.SolrResourceLoader <init> INFO: Solr home set to 'solr/' Anybody know what this is? Thanks

  Read the article

• Running Mathematica-5 remotely

  - by oxinabox.ucc.asn.au

  I have Mathematica 5 - a powerful CAS. I have a cheap netbook (running Windows XP), wich not only is too slow to run mathmatica on, I doubt it has the harddrive space. I do however have remote access to a number of very powerful computers, (most of wich run variose Linuxes, but one of which is Windows Server 2008, though I'ld rather not use this one*). Mostly over SSH but other protocols can be arraged for some, I'm sure. So I'ld like to install Mathematica onto one of these machine and then run it remotely. Either from the command line via Putty or via some other method. I glanced through the mathematical documentation and read something about using some MathLink program, which links the front end installed on my computer to a remote kernel. Anyone have any experience with this? I'm not sure if this belongs here or in SuperUser. At the moment, it's being tinkered with, and when the tinkering stops it'll likely be used to run multiple thin terms. As compared to the Linux machines: I have access to a dual 2.4 Xeon with 3GB RAM, which the rest of the world seems to have completely forgotten about (runs freeBSD!).

  Read the article

• How do I grant a database role execute permissions on a schema? What am I doing wrong?

  - by Lewray

  I am using SQL Server 2008 Express edition. I have created a Login , User, Role and Schema. I have mapped the user to the login, and assigned the role to the user. The schema contains a number of tables and stored procedures. I would like the Role to have execute permissions on the entire schema. I have tried granting execute permission through management studio and through entering the command in a query window. GRANT EXEC ON SCHEMA::schema_name TO role_name But When I connect to the database using SQL management studio (as the login I have created) firstly I cannot see the stored procedures, but more importantly I get a permission denied error when attempting to run them. The stored procedure in question does nothing except select data from a table within the same schema. I have tried creating the stored procedure with and without the line: WITH EXECUTE AS OWNER This doesn't make any difference. I suspect that I have made an error when creating my schema, or there is an ownership issue somewhere, but I am really struggling to get something working. The only way I have successfully managed to execute the stored procedures is by granting control permissions to the role as well as execute, but I don't believe this is the correct, secure way to proceed. Any suggestions/comments would be really appreciated. Thanks.

  Read the article

• Explanation for kernel error - Eeeek! page_mapcount went negative

  - by Aditya Advani

  Internet says this is a genuine Kernel Bug but does anyone know what triggers it?? Server running CentOS x86_64 with kernel 2.6.27.24 Here is my crash output: [root@u15345757 httpdocs]# Message from syslogd@ at Thu Aug 6 01:42:22 2009 ... u15345757 kernel: [1145736.506380] Eeek! page_mapcount(page) went negative! (-1) Message from syslogd@ at Thu Aug 6 01:42:22 2009 ... u15345757 kernel: [1145736.517515] page pfn = d0a3 Message from syslogd@ at Thu Aug 6 01:42:22 2009 ... u15345757 kernel: [1145736.523814] page->flags = 10000000000083c Message from syslogd@ at Thu Aug 6 01:42:22 2009 ... u15345757 kernel: [1145736.532489] page->count = 2 Message from syslogd@ at Thu Aug 6 01:42:22 2009 ... u15345757 kernel: [1145736.538741] page->mapping = ffff88001f01a110 Message from syslogd@ at Thu Aug 6 01:42:22 2009 ... u15345757 kernel: [1145736.547924] vma->vm_ops = 0x0 Message from syslogd@ at Thu Aug 6 01:42:22 2009 ... u15345757 kernel: [1145736.554543] [ cut here ] Message from syslogd@ at Thu Aug 6 01:42:23 2009 ... u15345757 kernel: [1145736.564528] invalid opcode: 0000 [1] SMP Message from syslogd@ at Thu Aug 6 01:42:23 2009 ... u15345757 kernel: [1145736.564528] Code: 80 e8 22 51 fd ff 48 8b 85 90 00 00 00 48 85 c0 74 19 48 8b 40 20 48 85 c0 74 10 48 8b 70 58 48 c7 c7 10 7f 7d 80 e8 fd 50 fd ff <0f> 0b eb fe 8b 77 18 41 58 5b 5d 83 e6 01 f7 de 83 c6 04 e9 df Broadcast message from root (pts/3) (Thu Aug 6 01:49:29 2009): The system is going down for reboot NOW!

  Read the article

• How to restrict file system when logged into terminal services

  - by pghcpa

  What I need to accomplish: With one login, when user is physically in the building I need them to see everything. When they are using terminal services with same login they should not be able to see the file system on the network. I can lock down the PC running terminal services as that is its only use. Details: Windows/2003 Server with terminal services. One login for a user (e.g., johndoe). When johndoe logs into the network at his desk in the office, he can see the network files according to group policy. When johndoe logs into terminal services from outside the building, we do not want to allow him see the network. Using 2x to do a published app, but that app has a "feature" that allows user to see network. Published application on termina services (only) is a document management system that is tied to windows login, so I can't give them two logins. With one login, when they are in the building I need them to see everything. When they are using terminal services they should not be able to see the network. I can lock down the PC running terminal services as that is its only use.

  Read the article

• Why do weekly tasks created via PowerShell using a different user fail with error 0x41306

  - by Danny Tuppeny

  We have some scripts that create scheduled jobs using PowerShell as part of our application. When testing them recently, I noticed that some of them always failed immediately, and no output is ever produced (they don't even appear in the Get-Job list). After many days of tweaking, we've managed to isolate it to any jobs that are set to run weekly. Below is a script that creates two jobs that do exactly the same thing. When we run this on our domain, and provide credentials of a domain user, then force both jobs to run in the Task Scheduler GUI (right-click - Run), the daily one runs fine (0x0 result) and the weekly one fails (0x41306). Note: If I don't provide the -Credential param, both jobs work fine. The jobs only fail if the task is both weekly, and running as this domain user. I can't find information on why this is happening, nor think of any reason it would behave differently for weekly jobs. The "History£ tab in the Task Scheduler has almost no useful information, just "Task stopping due to user request" and "Task terminated", both of which have no useful info: Task Scheduler terminated "{eabba479-f8fc-4f0e-bf5e-053dfbfe9f62}" instance of the "\Microsoft\Windows\PowerShell\ScheduledJobs\Test1" task. Task Scheduler stopped instance "{eabba479-f8fc-4f0e-bf5e-053dfbfe9f62}" of task "\Microsoft\Windows\PowerShell\ScheduledJobs\Test1" as request by user "MyDomain\SomeUser" . What's up with this? Why do weekly tasks run differently, and how can I diganose this issue? This is PowerShell v3 on Windows Server 2008 R2. I've been unable to reproduce this locally, but I don't have a user set up in the same way as the one in our production domain (I'm working on this, but I wanted to post this ASAP in the hope someone knows what's happening!). Import-Module PSScheduledJob $Action = { "Executing job!" } $cred = Get-Credential "MyDomain\SomeUser" # Remove previous versions (to allow re-running this script) Get-ScheduledJob Test1 | Unregister-ScheduledJob Get-ScheduledJob Test2 | Unregister-ScheduledJob # Create two identical jobs, with different triggers Register-ScheduledJob "Test1" -ScriptBlock $Action -Credential $cred -Trigger (New-JobTrigger -Weekly -At 1:25am -DaysOfWeek Sunday) Register-ScheduledJob "Test2" -ScriptBlock $Action -Credential $cred -Trigger (New-JobTrigger -Daily -At 1:25am)

  Read the article

• Apache httpd Problem

  - by Christopher

  Hey, I am getting intermittent issues with my site. Pages often hang with huge loading times and sometimes fail to load. The httpd error logs contain the following: [Wed Feb 23 06:54:17 2011] [debug] proxy_util.c(1854): proxy: grabbed scoreboard slot 0 in child 5871 for worker proxy:reverse [Wed Feb 23 06:54:17 2011] [debug] proxy_util.c(1967): proxy: initialized single connection worker 0 in child 5871 for (*) [Wed Feb 23 06:54:24 2011] [debug] proxy_util.c(1854): proxy: grabbed scoreboard slot 0 in child 5872 for worker proxy:reverse [Wed Feb 23 06:54:24 2011] [debug] proxy_util.c(1873): proxy: worker proxy:reverse already initialized [Wed Feb 23 06:54:24 2011] [debug] proxy_util.c(1967): proxy: initialized single connection worker 0 in child 5872 for (*) [Wed Feb 23 06:59:15 2011] [debug] proxy_util.c(1854): proxy: grabbed scoreboard slot 0 in child 5954 for worker proxy:reverse [Wed Feb 23 06:59:15 2011] [debug] proxy_util.c(1873): proxy: worker proxy:reverse already initialized The server is currently running with 800mb free memory, so it is not caused by lack of RAM. The current number of httpd procceses is 11. This does increase as the error persists and can rise up to 25+. Also, I am running Apache/2.2.3 (CentOS). Any suggestions would be greatly appreciated. Many thanks, Chris.

  Read the article

< Previous Page | 602 603 604 605 606 607 608 609 610 611 612 613  | Next Page >