Search Results

Search found 20933 results on 838 pages for 'jeff post'.

Page 609/838 | < Previous Page | 605 606 607 608 609 610 611 612 613 614 615 616  | Next Page >

  • Why do "Joke" programming languages exist? [closed]

    - by ThePlan
    First of all please be aware this post contains some abusive language but I hope it will not bother anyone. I apologize for the bad language but that's what the name is. As I've been doing documentation on existing programming languages attempting to make a complete list of them I stumbled across terrible programming languages, which were clearly not made for actual use and implementation due to their insane difficulty. Languages such as Brainfu*k and LOLCODE or Whitespace are fool languages because they have no real use. For example, a "Hello world" program written in BrainFu*k. Taken from Wikipedia: The following program prints "Hello World!" and a newline to the screen: +++++ +++++ initialize counter (cell #0) to 10 [ use loop to set the next four cells to 70/100/30/10 > +++++ ++ add 7 to cell #1 > +++++ +++++ add 10 to cell #2 > +++ add 3 to cell #3 > + add 1 to cell #4 <<<< - decrement counter (cell #0) ] > ++ . print 'H' > + . print 'e' +++++ ++ . print 'l' . print 'l' +++ . print 'o' > ++ . print ' ' << +++++ +++++ +++++ . print 'W' > . print 'o' +++ . print 'r' ----- - . print 'l' ----- --- . print 'd' > + . print '!' > . print '\n' or another example taken from LOLCODE language: HAI CAN HAS STDIO? PLZ OPEN FILE "LOLCATS.TXT"? AWSUM THX VISIBLE FILE O NOES INVISIBLE "ERROR!" KTHXBYE These languages are very difficult to learn/read/work with. My question is - Why do they exist? What is the purpose of them? Also, is there an official "name" for these type of languages?

    Read the article

  • Using Query Classes With NHibernate

    - by Liam McLennan
    Even when using an ORM, such as NHibernate, the developer still has to decide how to perform queries. The simplest strategy is to get access to an ISession and directly perform a query whenever you need data. The problem is that doing so spreads query logic throughout the entire application – a clear violation of the Single Responsibility Principle. A more advanced strategy is to use Eric Evan’s Repository pattern, thus isolating all query logic within the repository classes. I prefer to use Query Classes. Every query needed by the application is represented by a query class, aka a specification. To perform a query I: Instantiate a new instance of the required query class, providing any data that it needs Pass the instantiated query class to an extension method on NHibernate’s ISession type. To query my database for all people over the age of sixteen looks like this: [Test] public void QueryBySpecification() { var canDriveSpecification = new PeopleOverAgeSpecification(16); var allPeopleOfDrivingAge = session.QueryBySpecification(canDriveSpecification); } To be able to query for people over a certain age I had to create a suitable query class: public class PeopleOverAgeSpecification : Specification<Person> { private readonly int age; public PeopleOverAgeSpecification(int age) { this.age = age; } public override IQueryable<Person> Reduce(IQueryable<Person> collection) { return collection.Where(person => person.Age > age); } public override IQueryable<Person> Sort(IQueryable<Person> collection) { return collection.OrderBy(person => person.Name); } } Finally, the extension method to add QueryBySpecification to ISession: public static class SessionExtensions { public static IEnumerable<T> QueryBySpecification<T>(this ISession session, Specification<T> specification) { return specification.Fetch( specification.Sort( specification.Reduce(session.Query<T>()) ) ); } } The inspiration for this style of data access came from Ayende’s post Do You Need a Framework?. I am sick of working through multiple layers of abstraction that don’t do anything. Have you ever seen code that required a service layer to call a method on a repository, that delegated to a common repository base class that wrapped and ORMs unit of work? I can achieve the same thing with NHibernate’s ISession and a single extension method. If you’re interested you can get the full Query Classes example source from Github.

    Read the article

  • How can I get my ATI / AMD drivers to work with any kernel above 3.2.0.x?

    - by TorakTu
    How can I get my ATI / AMD drivers to work with any kernel above 3.2.0.x ? WHAT DID WORK Installed original AMD64 version of Ubuntu 12.04 ISO image. Burned DVD and installed which shown kernel 3.2.0-23 to begin with. Got 5.1 surround sound working. Got ATI ( Now its AMD ) video drivers installed for my Radeon HD R6870 Video card from AMD's website. fglrxinfo came up and reported as normal. THE PROBLEM Kernel 3.2.0.x kept locking up so I tried higher kernel versions. But ATI / AMD Drivers do not install on any kernel Above 3.2.0.x WHAT I HAVE TRIED I have gone over this tutorial many times ( https://help.ubuntu.com/community/BinaryDriverHowto/ATI ) and it doesn't work on ANY kernel except 3.2.0.x. The problems I am having here are that the ATI / AMD drivers working for the 12.04 Precise with kernel 3.2.0-23 and 24, But the computer kept locking up. Although all my games would work, the lock ups were random and were constant. So I looked all over the web for 3 days trying to find an answer and the lock up issue was said to just update the kernel. So I did. Have tried many kernels. All of them .. no lock ups. BUT the Restricted AMD drivers from the AMD website will not install. And none of the OpenSource AMD drivers have EVER installed no matter what Kernel or version I tried. EXAMPLE OUTPUT OF 3D TYPE OF ERRORS Javax.media.opengl.GLException: glXGetConfig failed: error code GLX_NO_EXTENSION at com.sun.opengl.impl.x11.X11GLDrawableFactory.glXGetConfig(X11GLDrawableFactory.java:651) at com.sun.opengl.impl.x11.X11GLDrawableFactory.xvi2GLCapabilities(X11GLDrawableFactory.java:350) at com.sun.opengl.impl.x11.X11GLDrawableFactory.chooseGraphicsConfiguration(X11GLDrawableFactory.java:174) at javax.media.opengl.GLCanvas.chooseGraphicsConfiguration(GLCanvas.java:520) at javax.media.opengl.GLCanvas.<init>(GLCanvas.java:131) at haven.HavenPanel.<init>(HavenPanel.java:68) at haven.HavenPanel.<init>(HavenPanel.java:78) at haven.MainFrame.<init>(MainFrame.java:182) at haven.MainFrame.main2(MainFrame.java:306) at haven.MainFrame.access$100(MainFrame.java:34) at haven.MainFrame$7.run(MainFrame.java:360) at java.lang.Thread.run(Thread.java:722) And of course this is what fglrxinfo shows : X Error of failed request: BadRequest (invalid request code or no such operation) Major opcode of failed request: 139 (ATIFGLEXTENSION) Minor opcode of failed request: 66 () Serial number of failed request: 13 Current serial number in output stream: 13 EDIT : I forgot to mention that I DID look at this post over the last few days and it did not help.

    Read the article

  • Best way to implement a simple bullet trajectory

    - by AirieFenix
    I searched and searched and although it's a fair simple question, I don't find the proper answer but general ideas (which I already have). I have a top-down game and I want to implement a gun which shoots bullets that follow a simple path (no physics nor change of trajectory, just go from A to B thing). a: vector of the position of the gun/player. b: vector of the mouse position (cross-hair). w: the vector of the bullet's trajectory. So, w=b-a. And the position of the bullet = [x=x0+speed*time*normalized w.x , y=y0+speed*time * normalized w.y]. I have the constructor: public Shot(int shipX, int shipY, int mouseX, int mouseY) { //I get mouse with Gdx.input.getX()/getY() ... this.shotTime = TimeUtils.millis(); this.posX = shipX; this.posY = shipY; //I used aVector = aVector.nor() here before but for some reason didn't work float tmp = (float) (Math.pow(mouseX-shipX, 2) + Math.pow(mouseY-shipY, 2)); tmp = (float) Math.sqrt(Math.abs(tmp)); this.vecX = (mouseX-shipX)/tmp; this.vecY = (mouseY-shipY)/tmp; } And here I update the position and draw the shot: public void drawShot(SpriteBatch batch) { this.lifeTime = TimeUtils.millis() - this.shotTime; //position = positionBefore + v*t this.posX = this.posX + this.vecX*this.lifeTime*speed*Gdx.graphics.getDeltaTime(); this.posY = this.posY + this.vecY*this.lifeTime*speed*Gdx.graphics.getDeltaTime(); ... } Now, the behavior of the bullet seems very awkward, not going exactly where my mouse is (it's like the mouse is 30px off) and with a random speed. I know I probably need to open the old algebra book from college but I'd like somebody says if I'm in the right direction (or points me to it); if it's a calculation problem, a code problem or both. Also, is it possible that Gdx.input.getX() gives me non-precise position? Because when I draw the cross-hair it also draws off the cursor position. Sorry for the long post and sorry if it's a very basic question. Thanks!

    Read the article

  • SQL 2014 does data the way developers want

    - by Rob Farley
    A post I’ve been meaning to write for a while, good that it fits with this month’s T-SQL Tuesday, hosted by Joey D’Antoni (@jdanton) Ever since I got into databases, I’ve been a fan. I studied Pure Maths at university (as well as Computer Science), and am very comfortable with Set Theory, which undergirds relational database concepts. But I’ve also spent a long time as a developer, and appreciate that that databases don’t exactly fit within the stuff I learned in my first year of uni, particularly the “Algorithms and Data Structures” subject, in which we studied concepts like linked lists. Writing in languages like C, we used pointers to quickly move around data, without a database in sight. Of course, if we had a power failure all this data was lost, as it was only persisted in RAM. Perhaps it’s why I’m a fan of database internals, of indexes, latches, execution plans, and so on – the developer in me wants to be reassured that we’re getting to the data as efficiently as possible. Back when SQL Server 2005 was approaching, one of the big stories was around CLR. Many were saying that T-SQL stored procedures would be a thing of the past because we now had CLR, and that obviously going to be much faster than using the abstracted T-SQL. Around the same time, we were seeing technologies like Linq-to-SQL produce poor T-SQL equivalents, and developers had had a gutful. They wanted to move away from T-SQL, having lost trust in it. I was never one of those developers, because I’d looked under the covers and knew that despite being abstracted, T-SQL was still a good way of getting to data. It worked for me, appealing to both my Set Theory side and my Developer side. CLR hasn’t exactly become the default option for stored procedures, although there are plenty of situations where it can be useful for getting faster performance. SQL Server 2014 is different though, through Hekaton – its In-Memory OLTP environment. When you create a table using Hekaton (that is, a memory-optimized one), the table you create is the kind of thing you’d’ve made as a developer. It creates code in C leveraging structs and pointers and arrays, which it compiles into fast code. When you insert data into it, it creates a new instance of a struct in memory, and adds it to an array. When the insert is committed, a small write is made to the transaction to make sure it’s durable, but none of the locking and latching behaviour that typifies transactional systems is needed. Indexes are done using hashes and using bw-trees (which avoid locking through the use of pointers) and by handling each updates as a delete-and-insert. This is data the way that developers do it when they’re coding for performance – the way I was taught at university before I learned about databases. Being done in C, it compiles to very quick code, and although these tables don’t support every feature that regular SQL tables do, this is still an excellent direction that has been taken. @rob_farley

    Read the article

  • Sharing on Github

    - by Alan
    Over the past couple weeks I have gotten a lot of help from StackOverflow users on a project, and rather than keep the finished product to myself I wanted to share it unencumbered by licenses, but don't want there to be so much legwork during installation that users shy away from trying it. I am about to post it to Github and choosing public domain licensing. I would like to to be super simple for users to make use of and just FTP it up and go. That being said, do I need to make sure I remove things like the JQuery file, and other GPL / MIT licensed dependencies that I didn't write but that my code depends on? I haven't removed any copyright notices from the other code and all of it open source, it would just be nice if users could download everything at once while of course not trying to represent that I am the license holder of the dependencies. Inside my files are also some snippets, do those have to be externalized with installation instructions or can it be posted as is? Here is an example, my nav.php file is 115 lines long and I have these at the top: <script type="text/javascript" src="./js/ddaccordion.js"> /*********************************************** * Accordion Content script- (c) Dynamic Drive DHTML code library (www.dynamicdrive.com) * Visit http://www.dynamicDrive.com for hundreds of DHTML scripts * This notice must stay intact for legal use ***********************************************/ </script> <link href="css/admin.css" rel="stylesheet"> <script type="text/javascript"> ddaccordion.init({ headerclass: "submenuheader", //Shared CSS class name of headers group contentclass: "submenu", //Shared CSS class name of contents group revealtype: "click", //Reveal content when user clicks or onmouseover the header? Valid value: "click", "clickgo", or "mouseover" mouseoverdelay: 200, //if revealtype="mouseover", set delay in milliseconds before header expands onMouseover collapseprev: false, //Collapse previous content (so only one open at any time)? true/false defaultexpanded: [], //index of content(s) open by default [index1, index2, etc] [] denotes no content onemustopen: false, //Specify whether at least one header should be open always (so never all headers closed) animatedefault: false, //Should contents open by default be animated into view? persiststate: true, //persist state of opened contents within browser session? toggleclass: ["", ""], //Two CSS classes to be applied to the header when it's collapsed and expanded, respectively ["class1", "class2"] togglehtml: ["suffix", "<img src='./images/plus.gif' class='statusicon' />", "<img src='./images/minus.gif' class='statusicon' />"], //Additional HTML added to the header when it's collapsed and expanded, respectively ["position", "html1", "html2"] (see docs) animatespeed: "fast", //speed of animation: integer in milliseconds (ie: 200), or keywords "fast", "normal", or "slow" oninit:function(headers, expandedindices){ //custom code to run when headers have initalized //do nothing }, onopenclose:function(header, index, state, isuseractivated){ //custom code to run whenever a header is opened or closed //do nothing } }) </script>

    Read the article

  • Methodology to understanding JQuery plugin & API's developed by third parties

    - by Taoist
    I have a question about third party created JQuery plug ins and API's and the methodology for understanding them. Recently I downloaded the JQuery Masonry/Infinite scroll plug in and I couldn't figure out how to configure it based on the instructions. So I downloaded a fully developed demo, then manually deleted everything that wouldn't break the functionality. The code that was left allowed me to understand the plug in much greater detail than the documentation. I'm now having a similar issue with a plug in called JQuery knob. http://anthonyterrien.com/knob/ If you look at the JQuery Knob readme file it says this is working code: $(function() { $('.dial') .trigger( 'configure', { "min":10, "max":40, "fgColor":"#FF0000", "skin":"tron", "cursor":true } ); }); But as far as I can tell it isn't at all. The read me also says the Plug in uses Canvas. I am wondering if I am suppose to wrap this code in a canvas context or if this functionality is already part of the plug in. I know this kind of "question" might not fit in here but I'm a bit confused on the assumptions around reading these kinds of documentation and thought I would post the query regardless. Curious to see if this is due to my "newbi" programming experience or if this is something seasoned coders also fight with. Thank you. Edit In response to Tyanna's reply. I modified the code and it still doesn't work. I posted it below. I made sure that I checked the Google Console to insure the basics were taken care of, such as not getting a read-error on the library. <!DOCTYPE html> <meta charset="UTF-8"> <title>knob</title> <link rel="stylesheet" href="http://ajax.googleapis.com/ajax/libs/jqueryui/1.7.2/themes/hot-sneaks/jquery-ui.css" type="text/css" /> <script type="text/javascript" src="https://ajax.googleapis.com/ajax/libs/jquery/1.7.2/jquery.js" charset="utf-8"></script> <script src="https://ajax.googleapis.com/ajax/libs/jqueryui/1.8.21/jquery-ui.min.js"></script> <script src="js/jquery.knob.js"></script> <div id="button1">test </div> <script> $(function() { $("#button1").click(function () { $('.dial').trigger( 'configure', { "min":10, "max":40, "fgColor":"#FF0000", "skin":"tron", "cursor":true } ); }); }); </script>

    Read the article

  • Validate if aTextBox Value Start with a Specific Letter

    - by Vincent Maverick Durano
    In case you will be working on a page that needs to validate the first character of the TextBox entered by a user then here are two options that you can use: Option 1: Using an array   1: <asp:Content ID="Content1" ContentPlaceHolderID="HeadContent" runat="server"> 2: <script type="text/javascript"> 3: function CheckFirstChar(o) { 4: var arr = ['A', 'B', 'C', 'D']; 5: if (o.value.length > 0) { 6: for (var i = 0; i < arr.length; i++) { 7: if (o.value.charAt(0) == arr[i]) { 8: alert('Valid'); 9: return true; 10: } 11: else { 12: alert('InValid'); 13: return false; 14: } 15: } 16: } 17: } 18: </script> 19: </asp:Content> 20: <asp:Content ID="Content2" ContentPlaceHolderID="MainContent" runat="server"> 21: <asp:TextBox ID="TextBox1" runat="server" onblur="return CheckFirstChar(this);"></asp:TextBox> 22: </asp:Content>   The example above uses an array of string for storing the list of  characters that a TextBox value should start with. We then iterate to the array and compare the first character of TextBox value to see if it matches any characters from the array. Option 2: Using Regular Expression (Preferred way)   1: <asp:Content ID="Content1" ContentPlaceHolderID="HeadContent" runat="server"> 2: <script type="text/javascript"> 3: function CheckFirstChar(o) { 4: pattern = /^(A|B|C|D)/; 5: if (!pattern.test(o.value)) { 6: alert('InValid'); 7: return false; 8: } else { 9: alert('Valid'); 10: return true; 11: } 12: } 13: </script> 14: </asp:Content> 15: <asp:Content ID="Content2" ContentPlaceHolderID="MainContent" runat="server"> 16: <asp:TextBox ID="TextBox1" runat="server" onblur="return CheckFirstChar(this);"></asp:TextBox> 17: </asp:Content>   The example above uses regular expression with the pattern  /^(A|B|C|D)/. This will check if the TextBox value starts with A,B,C or D. Please note that it's case sensitive. If you want to allow lower case then you can alter the patter to this /^(A|B|C|D)/i. The i in the last part will cause a case-insensitive search.   That's it! I hope someone find this post useful!

    Read the article

  • Small script to look for Project Replication actions that have failed

    - by Trond Strømme
    Today when looking at a couple of projects on a ZFS 7320 Storage Appliance I noticed on one project that one of its replication actions had failed, as I hadn't checked the Recent Alerts log yet I was not aware of this. I decided to write a small script to check if there were others that had failed. Nothing fancy, just a loop through all projects, look at the project's replication child and compare the values of the last_sync and last_try properties and print the result if they're not equal. (There are probably more sensible ways of doing this, but at least it involves me getting the chance to put on my headphones and doing just a little bit of coding.) script // this script will locate failed project level replication // it will look at the sync times for 'last_sync' and 'last_try' // and compare these, if they deviate you should investigate. // NOTE! this code is offered 'as is' Run at your own risk, // it will probably work as intended, but in now way can I // (or Oracle) be held responsible if your server starts behaving // like a three year old kid in a candy store.. (not that mine do, // they are very well behaved boys...) run('configuration'); run('storage'); printf('Host: %s, pool: %s\n', get('owner'),get('pool')); run('cd /'); run('shares'); proj=list(); printf("total projects: %d\n",proj.length +'\n'); // just for project level replication for(i=0;i<proj.length;i++){ run('select '+proj[i]); run('replication'); //get all replication actions preps = list(); for(j=0;j<preps.length;j++){ run('select ' + preps[j]); last_sync = get('last_sync'); last_try = get('last_try'); // printf("target %s\n", get('target')); //why the flip does this not get the proper name? if(!( last_sync.valueOf() === last_try.valueOf())){ printf("sync has failed for %s %s\n", proj[i], get('target')); }else{ // printf("OK %s %s\n", proj[i], get('target')); } run('done'); //done with the replica action } run('done'); run('done'); } printf("finished\n"); For a more on how to run the script, or testing it please look at my previous post. Sample output: Host: elb1sn01, pool: exalogic total projects: 45 sync has failed for ACSExalogicSystem cb3a24fe-ad60-c90f-d15d-adaafd595639 finished

    Read the article

  • Mutable Records in F#

    - by MarkPearl
    I’m loving my expert F# book – today I thought I would give a post on using mutable records as covered in Chapter 4 of Expert F#. So as they explain the simplest mutable data structures in F# are mutable records. The whole concept of things by default being immutable is a new one for me from my C# background. Anyhow… lets look at some C# code first. using System; using System.Collections.Generic; using System.Linq; using System.Text; namespace MutableRecords { public class DiscreteEventCounter { public int Total { get; set; } public int Positive { get; set; } public string Name { get; private set; } public DiscreteEventCounter(string name) { Name = name; } } class Program { private static void recordEvent(DiscreteEventCounter s, bool isPositive) { s.Total += 1; if (isPositive) s.Positive += 1; } private static void reportStatus (DiscreteEventCounter s) { Console.WriteLine("We have {0} {1} out of {2}", s.Positive, s.Name, s.Total); } static void Main(string[] args) { var longCounter = new DiscreteEventCounter("My Discrete Counter"); recordEvent(longCounter, true); recordEvent(longCounter, true); reportStatus(longCounter); Console.ReadLine(); } } } Quite simple, we have a class that has a few values. We instantiate an instance of the class and perform increments etc on the instance. Now lets look at an equivalent F# sample. namespace EncapsulationNS module Module1 = open System type DiscreteEventCounter = { mutable Total : int mutable Positive : int Name : string } let recordEvent (s: DiscreteEventCounter) isPositive = s.Total <- s.Total+1 if isPositive then s.Positive <- s.Positive+1 let reportStatus (s: DiscreteEventCounter) = printfn "We have %d %s out of %d" s.Positive s.Name s.Total let newCounter nm = { Total = 0; Positive = 0; Name = nm } // // Using it... // let longCounter = newCounter "My Discrete Counter" recordEvent longCounter (true) recordEvent longCounter (true) reportStatus longCounter System.Console.ReadLine() Notice in the type declaration of the DiscreteEventCounter we had to explicitly declare that the total and positive value holders were mutable. And that’s it – a very simple example of mutable types.

    Read the article

  • More on Map Testing

    - by Michael Stephenson
    I have been chatting with Maurice den Heijer recently about his codeplex project for the BizTalk Map Testing Framework (http://mtf.codeplex.com/). Some of you may remember the article I did for BizTalk 2009 and 2006 about how to test maps but with Maurice's project he is effectively looking at how to improve productivity and quality by building some useful testing features within the framework to simplify the process of testing maps. As part of our discussion we realized that we both had slightly different approaches to how we validate the output from the map. Put simple Maurice does some xpath validation of the data in various nodes where as my approach for most standard cases is to use serialization to allow you to validate the output using normal MSTest assertions. I'm not really going to go into the pro's and con's of each approach because I think there is a place for both and also I'm sure others have various approaches which work too. What would be great is for the map testing framework to provide support for different ways of testing which can cover everything from simple cases to some very specialized scenarios. So as agreed with Maurice I have done the sample which I will talk about in the rest of this article to show how we can use the serialization approach to create and compare the input and output from a map in normal development testing. Prerequisites One of the common patterns I usually implement when developing BizTalk solutions is to use xsd.exe to create .net classes for most of the schemas used within the solution. In the testing pattern I will take advantage of these .net classes. The Map In this sample the map we will use is very simple and just concatenates some data from the input message to the output message. Hopefully the below picture illustrates this well. The Test In the test I'm basically taking the following actions: Use the .net class generated from the schema to create an input message for the map Serialize the input object to a file Run the map from .net using the standard BizTalk test method which was generated for running the map Deserialize the output file from the map execution to a .net class representing the output schema Use MsTest assertions to validate things about the output message The below picture shows this: As you can see the code for this is pretty simple and it's all strongly typed which means changes to my schema which can affect the tests can be easily picked up as compilation errors. I can then chose to have one test which validates most of the output from the map, or to have many specific tests covering individual scenarios within the map. Summary Hopefully this post illustrates a powerful yet simple way of effectively testing many BizTalk mapping scenarios. I will probably have more conversations with Maurice about these approaches and perhaps some of the above will be included in the mapping test framework.   The sample can be downloaded from here: http://cid-983a58358c675769.office.live.com/self.aspx/Blog%20Samples/More%20Map%20Testing/MapTestSample.zip

    Read the article

  • 12.04 Unity 3D 80% CPU load with Compiz

    - by user39288
    EDIT : I have been able to to determine that the problem is not compiz, but is actually Xorg. I don't know why, but by quickly maximizing terminal and taking a screenshot with top running before the problem went away I am able to see xorg takes up 72% of cpu, with bamfdaemon taking up 18%, and compiz taking up 14%. Seems the nvidia drivers are to blame, will play more with settings and perhaps do a clean nvidia-current install to try to fix the problem. Having a very annoying problem with high CPU usage. Running 12.04 with latest drivers and nvidia-current installed. Have not had any issues for days, now I have a strange problem. Unity 3d runs great most of the time, 1-2% CPU usage with only transmission running in background. Windows open and close smoothly. However,no matter what programs are open, if I minimize all open programs to the unity bar on the left, my CPU jumps to about 80% and slows down all maximize and minimize effects. Mouse movement stays smooth the whole time, but unity becomes unresponsive for up to 30 seconds at times. Hitting alt + tab to bring up even a single window fixes the problem. The window I bring back up doesn't even have to be maximized to solve the problem. Hitting the super button to bring up the dash makes CPU drop back to idle until I close it, then high CPU usage resumes. Believe the problem is compiz, but even just having only terminal running "top", I have to minimize it to the tray for the problem to show, so I can't see the problem process. I can only tell about the high CPU usage using indicator-sysmonitor. Even tried quitting the indicator, but I can still tell very poor performance with all applications when minimized. Reset compiz back to defaults, tried going to the post-release update nvidia drivers, played with vsync settings in both the nvidia settings and compiz. Even forced refresh rate, but cannot solve the problem. The problem does NOT occur in Unity 2D. Specs are core 2 duo 2.0ghz, 4GB ddr2 ram, 2x 320's HDD in RAID 0, and Nvidia GTX 260M graphics card.

    Read the article

  • career planning advice [closed]

    - by JDB
    Possible Duplicate: Are certifications worth it? I am at the point in my career where people start to veer off into either management-type roles or they focus on solidifying their technical skills to stay in the development game for the long-haul. Here's my story: I've got a degree in economics, an MA in Political Science and an MBA in Finance and Management. In addition, I've done coursework in advanced math and software development (although no degree in math or software). All-in-all, I've got 13 years of post-secondary education under my belt. I, however, currently work as a software developer using C# for desktop, Silverlight, Flex and javascript for web, and objective c for mobile. I've been in software development for the past 3.3 years, and it seems like it comes pretty easy to me. I work in a field called "geospatial information systems," which just involves customization and manipulation of geospatial data. Right now I am looking at one of several certifications. Given this background, which of these certifications has the highest ceiling? CFA PMP various development/technological certifications from Microsoft, etc. Other? My academic and work experience are all heavy on the analytical/development side, esp. so given the MBA and the B.S. in Econ. The political science degree was really a lot of stats. So it seems that I would be good pursuing more of the CFA/analytical role. This is a difficult path, however, because I have no work experience in the financial sector, and the developers in finance are all "quants," which again, I am OK with, but I haven't done much statistical modeling in the past 3.3 years. The PMP would require knowledge of best practices as it pertains explicitly to software development. I also don't enjoy a lot of business travel, a common theme for most PMP jobs I've seen. If certifications is the route, which would you recommend? Anything else? I've thought about going back to try to knock out a B.S. in C.S., but I wasn't sure how long that would take, or what would be involved. Thoughts or recommendations? Thanks in advance! I turn 32 this weekend, which is what has forced me to think about these issues.

    Read the article

  • Got Samba, Got PyNeighbourhood but still no connection. What else do I need?

    - by Frank A
    I am sure I had already hit post before but then could only find it by backing through browser. Was it deleted? is the question too dumb, sorry that I do not know the right jargon just trying to get answers to my problem anyway have reworded stuff a bit This seems to be a number one requirement for lots of people and 2 months on from setting up my Ubuntu pc, I am still unable to get a lasting connection in either direction. Adding a windows pc to a network is so easy... just a few clicks and get on with using it all. Using all command approaches and modifying configuration files is hardly user friendly. Googling brings up thousands of solutions but mostly they are too techy or assume the user is fully aware of how to use Linux. I do realise that their must be a lot of flavours for connecting to networks. So far I have installed Samba and fiddled with its config file. The day I did all that it worked from XP to Ubuntu. When I came back two days later to transfer my data over it would not connect. Although the the share does show up in Windows (XP) My Network Places. Today I installed PyNeighbourhood and this shows the Ubuntu box and all of the shares I had created at some point on Ubuntu and it even shows this under the XP workgroup name. But instructions on setting the connection up seem to relate to an earlier version and nothing seems to work there either. (I unshared most of those test folders but they still show up her but that is another question. When I click on mount- I can only click on one on the Ubuntu machine, there is one with no name so I assume this to be my attempt to add one XP Shared drive using ipaddress, I get errors. (gksu:9767): Gtk-WARNING **: Unable to locate theme engine in module_path: "pixmap", (gksu:9767): Gtk-WARNING **: Unable to locate theme engine in module_path: "pixmap", (gksu:9767): Gtk-WARNING **: Unable to locate theme engine in module_path: "pixmap", (gksu:9767): Gtk-WARNING **: Unable to locate theme engine in module_path: "pixmap", mount error(6): No such device or address Refer to the mount.cifs(8) manual page (e.g. man mount.cifs) OK tried to find the manual referred to... only an old comment that manual would be produced for future versions. I saw in another thread that Winbind is needed as well or at least I assume as well? Totally lost again? Please help, what else needs to be installed to connect to win pcs on the network.

    Read the article

  • Lenovo W520 back usb port not working

    - by jaudette
    The usb port in the back of my laptop (on the right side when viewed from using perspective) is not working. Does anybody know if we can get this port working, and what the port number is. Here is my lsusb, if it can help. % lsusb Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 003 Device 002: ID 046d:c01e Logitech, Inc. MX518 Optical Mouse Bus 003 Device 003: ID 046d:c318 Logitech, Inc. Illuminated Keyboard Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 003: ID 0765:5001 X-Rite, Inc. Huey PRO Colorimeter Bus 001 Device 004: ID 147e:2016 Upek Biometric Touchchip/Touchstrip Fingerprint Sensor Bus 001 Device 005: ID 0a5c:217f Broadcom Corp. Bluetooth Controller Bus 001 Device 006: ID 04f2:b217 Chicony Electronics Co., Ltd Lenovo Integrated Camera (0.3MP) Bus 002 Device 003: ID 17ef:1003 Lenovo Integrated Smart Card Reader I am running 12.10, upgraded from 12.04 but it did not work either in 12.04. The two usb ports on the left work just fine. EDIT: I just updated my bios from 1.32 to 1.39, no change in behaviour. The port does not even power up my devices. EDIT 2: Booted up windows, and the port is working. I went into the device manager and looked at the USB settings. I found my USB drive on Port 2, Hub 3, i just don't know how that relates to the Bus and Device numbers of linux. In windows, Smart card reader was on USB hub located at port 1 hub 2, fingerprint and bluetooth were on USB hub located at port 1 hub 1 EDIT 3: Went and looked at this SO post. Tried to look at my kern.log file with tail -f /var/log/kern.log. Got some activity when plugging/removing devices in other ports, but nothing happens when connecting a device into that port. It really looks disabled. Looked at my usb1-4 sys/bus/usb/devices/usb1/power/control and they are all set on auto. As expected, usb4 have version 3.00, the others (usb1-usb3) are 2.00.

    Read the article

  • Bullet Physics implementing custom MotionState class

    - by Arosboro
    I'm trying to make my engine's camera a kinematic rigid body that can collide into other rigid bodies. I've overridden the btMotionState class and implemented setKinematicPos which updates the motion state's tranform. I use the overridden class when creating my kinematic body, but the collision detection fails. I'm doing this for fun trying to add collision detection and physics to Sean O' Neil's Procedural Universe I referred to the bullet wiki on MotionStates for my CPhysicsMotionState class. If it helps I can add the code for the Planetary rigid bodies, but I didn't want to clutter the post. Here is my motion state class: class CPhysicsMotionState: public btMotionState { protected: // This is the transform with position and rotation of the camera CSRTTransform* m_srtTransform; btTransform m_btPos1; public: CPhysicsMotionState(const btTransform &initialpos, CSRTTransform* srtTransform) { m_srtTransform = srtTransform; m_btPos1 = initialpos; } virtual ~CPhysicsMotionState() { // TODO Auto-generated destructor stub } virtual void getWorldTransform(btTransform &worldTrans) const { worldTrans = m_btPos1; } void setKinematicPos(btQuaternion &rot, btVector3 &pos) { m_btPos1.setRotation(rot); m_btPos1.setOrigin(pos); } virtual void setWorldTransform(const btTransform &worldTrans) { btQuaternion rot = worldTrans.getRotation(); btVector3 pos = worldTrans.getOrigin(); m_srtTransform->m_qRotate = CQuaternion(rot.x(), rot.y(), rot.z(), rot.w()); m_srtTransform->SetPosition(CVector(pos.x(), pos.y(), pos.z())); m_btPos1 = worldTrans; } }; I add a rigid body for the camera: // Create rigid body for camera btCollisionShape* cameraShape = new btSphereShape(btScalar(5.0f)); btTransform startTransform; startTransform.setIdentity(); // forgot to add this line CVector vCamera = m_srtCamera.GetPosition(); startTransform.setOrigin(btVector3(vCamera.x, vCamera.y, vCamera.z)); m_msCamera = new CPhysicsMotionState(startTransform, &m_srtCamera); btScalar tMass(80.7f); bool isDynamic = (tMass != 0.f); btVector3 localInertia(0,0,0); if (isDynamic) cameraShape->calculateLocalInertia(tMass,localInertia); btRigidBody::btRigidBodyConstructionInfo rbInfo(tMass, m_msCamera, cameraShape, localInertia); m_rigidBody = new btRigidBody(rbInfo); m_rigidBody->setCollisionFlags(m_rigidBody->getCollisionFlags() | btCollisionObject::CF_KINEMATIC_OBJECT); m_rigidBody->setActivationState(DISABLE_DEACTIVATION); This is the code in Update() that runs each frame: CSRTTransform srtCamera = CCameraTask::GetPtr()->GetCamera(); Quaternion qRotate = srtCamera.m_qRotate; btQuaternion rot = btQuaternion(qRotate.x, qRotate.y, qRotate.z, qRotate.w); CVector vCamera = CCameraTask::GetPtr()->GetPosition(); btVector3 pos = btVector3(vCamera.x, vCamera.y, vCamera.z); CPhysicsMotionState* cameraMotionState = CCameraTask::GetPtr()->GetMotionState(); cameraMotionState->setKinematicPos(rot, pos);

    Read the article

  • Ubuntu 12.04 updates fail recently - Please help

    - by user74152
    I upgraded Ubuntu 11.10 to 12.04 LTS immediately after its release (april 2012). Since then updates (new kernels and others) succeeded regularly, but recently, suddenly, updates fail consistently. What causes the problem and how can it be solved? Terminal information after the last update attempt: ariel@ariel-MS-7592:~$ sudo apt-get upgrade Reading package lists... Done Building dependency tree Reading state information... Done 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. 3 not fully installed or removed. After this operation, 0 B of additional disk space will be used. Do you want to continue [Y/n]? y Setting up linux-image-3.2.0-26-generic (3.2.0-26.41) ... Running depmod. update-initramfs: deferring update (hook will be called later) Examining /etc/kernel/postinst.d. run-parts: executing /etc/kernel/postinst.d/dkms 3.2.0-26-generic /boot/vmlinuz-3.2.0-26-generic run-parts: executing /etc/kernel/postinst.d/initramfs-tools 3.2.0-26-generic /boot/vmlinuz-3.2.0-26-generic update-initramfs: Generating /boot/initrd.img-3.2.0-26-generic run-parts: executing /etc/kernel/postinst.d/pm-utils 3.2.0-26-generic /boot/vmlinuz-3.2.0-26-generic run-parts: executing /etc/kernel/postinst.d/update-notifier 3.2.0-26-generic /boot/vmlinuz-3.2.0-26-generic run-parts: executing /etc/kernel/postinst.d/zz-update-grub 3.2.0-26-generic /boot/vmlinuz-3.2.0-26-generic /usr/sbin/grub-mkconfig: 11: /etc/default/grub: splash”: not found run-parts: /etc/kernel/postinst.d/zz-update-grub exited with return code 127 Failed to process /etc/kernel/postinst.d at /var/lib/dpkg/info/linux-image-3.2.0-26-generic.postinst line 1010. dpkg: error processing linux-image-3.2.0-26-generic (--configure): subprocess installed post-installation script returned error exit status 2 No apport report written because MaxReports is reached already dpkg: dependency problems prevent configuration of linux-image-generic: linux-image-generic depends on linux-image-3.2.0-26-generic; however: Package linux-image-3.2.0-26-generic is not configured yet. dpkg: error processing linux-image-generic (--configure): dependency problems - leaving unconfigured dpkg: dependency problems prevent configuration of linux-generic: linux-generic depends on linux-image-generic (= 3.2.0.26.28); however: Package linux-image-generic is not configured yet. dpkg: error processing linux-generic (--configure): dependency problems - leaving unconfiguredNo apport report written because MaxReports is reached already No apport report written because MaxReports is reached already Errors were encountered while processing: linux-image-3.2.0-26-generic linux-image-generic linux-generic E: Sub-process /usr/bin/dpkg returned an error code (1)

    Read the article

  • What is a good design model for my new class?

    - by user66662
    I am a beginning programmer who, after trying to manage over 2000 lines of procedural php code, now has discovered the value of OOP. I have read a few books to get me up to speed on the beginning theory, but would like some advice on practical application. So,for example, let's say there are two types of content objects - an ad and a calendar event. what my application does is scan different websites (a predefined list), and, when it finds an ad or an event, it extracts the data and saves it to a database. All of my objects will share a $title and $description. However, the Ad object will have a $price and the Event object will have $startDate. Should I have two separate classes, one for each object? Should I have a 'superclass' with the $title and $description with two other Ad and Event classes with their own properties? The latter is at least the direction I am on now. My second question about this design is how to handle the logic that extracts the data for $title, $description, $price, and $date. For each website in my predefined list, there is a specific regex that returns the desired value for each property. Currently, I have an extremely large switch statement in my constructor which determines what website I am own, sets the regex variables accordingly, and continues on. Not only that, but now I have to repeat the logic to determine what site I am on in the constructor of each class. This doesn't feel right. Should I create another class Algorithms and store the logic there for each site? Should the functions of to handle that logic be in this class? or specific to the classes whos properties they set? I want to take into account in my design two things: 1) I will add different content objects in the future that share $title and $description, but will have their own properties, so, I want to be able to easily grow these as needed. 2) I will add more websites constantly (each with their own algorithms for data extraction) so I would like to plan efficienty managing and working with these now. I thought about extending the Ad or Event class with 'websiteX' class and store its functions there. But, this didn't feel right either as now I have to manage 100s of little website specific class files. Note, I didn't know if this was the correct site or stackoverflow was the better choice. If so, let me know and I'll post there.

    Read the article

  • [EF + Oracle] Intro

    - by JTorrecilla
    Prologue I have a busy personal and working time, and at this moment that I start to get more free time, I decided to start a Serie about Entity Framework with Oracle. A few time ago, I got my first experience with EF and Oracle with Oracle 10 g express and Oracle 10 g with the same results, Doesn’t work. Now I download Oracle 11 g to Test again. Tools To start using EF with Oracle we need the following: 1. Visual Studio 2010. No Express Edition 2. Oracle 11g 3 Oracle Driver for EF (ODAC) Intro People, who are starting with EF developments, I recommend to take a look into Unai Zorrilla’s Blog, the post were written in Spanish but they are great! To this Serie, we are going to define the DB from the Oracle administrator. For that we need to follow the next steps: 1. Create a User with a PassWord. In my example the user will be Jtorrecilla 2. Create a TableSpace 3. Define some example tables   (Image1) When we have created the DB, we are going to start a new project in VS 2010. I will start a C# Project. To start with EF, we need to add a new objet to our Project “ADO .NET Entity Data Model". (Image2) The next step will be to indicate that our model will be based on an existing DB, and indicate the connection string (Images 3 and 4): (Imagen3) (Imagen4) Once we selected the connection string, we will need to indicate that in the connection will be saved “Sensitive” data (Image 5), and in the next step we are going to select the DB objets to use in the project(Image 6).   (Image 5) (Image 6) A the end of the selection, we will press Finish button, and it will generate a EDMX file to add to our solution, and in the IDE will appear the DB Schema with the selected Tables and Relations. (Imagen7) One Entity is composed by a set of properties (each matches with a column from the Table in the DB) and Navigation Properties that represents any relation with other Entities.   Finally With this chapter we have installed the environment, defined a DB and configured the solution to start using EF with Oracle. In the next chapter we are going to see What is a Entity and how it works. I hope you enjoy this Serie!

    Read the article

  • S11 launched

    - by unixman
    Now that Oracle Solaris 11 is out, its time to do 2 things -- 1) Its time to see what's in it, what's new and why its important, and then assess why it might make sense to begin evaluating it for your needs and 2) Its time to acknowledge, give thanks to and congratulate all the R&D personnel, architects, engineers, designers and testers who've put in so much effort and energy into helping make Solaris 11 (and SunOS 5.11) what it has become -- starting way back circa 2004 and, more importantly, culminating in the recent years and months -- staying focused on the execution, unwavering in the face of various challenges. For #1 above, here are a few good things to get going with - Watch the product launch replay - Visit the Solaris 11 Spotlight section on oracle.com - Get comfortable through introductory videos and detailed "how-to" guides (ex: how to create and publish IPS packages), white papers on the new default root file system, ZFS, and reap the benefits brought on by the fundamental shift in easing the administration experience - Look at the next level of software lifecycle management that is enabled by technologies such as Automated Installer and Image Packaging System -- that dramatically address patch management-related challenges - Understand how we continue to innovate in areas of service intelligence, reliability and availability - Start to evaluate enhancements in virtualization capabilities -- whether influenced by the need to consolidate or motivated by the need to have increased service mobility across physical systems, leveraging hardware-level abstractions - Gain more control over your network-centric services through enhancements in network resource management, observability and I/O performance - Look beyond your existing infrastructure with confidence that you can re-host and transition to newer systems with the use of Solaris 10 zones running on top of Solaris 11 - Relish in the fact that you can do all this, get your data to be secure and encrypted and more, on both, SPARC and x86-based systems. - Stay informed by keeping an eye on relevant blogs, which we've begun turning up recently. - Go through a hands-on lab - Sign up to take a class or just opt to watch various videos to begin to raise your comfort level with these technologies For #2 above -- There are many ways to do that. One way is to just say "thanks" with an email, a post, or a simple card,  similar to this one seen at a Barnes and Noble store recently.  The front of the card is followed by what's inside... and as the saying goes, now more then ever "it's what's inside that counts" And here's the inside of the card: So, what are you waiting for ? Go download and try it out, and please let us know what you think of it!

    Read the article

  • The Minimalist's Approach to Content Governance

    - by Kellsey Ruppel
    This week on the blog, we want to focus on the content lifecylce and how important it is to have the tools in place to be able to properly manage all te phases of the content lifecylce. John Brunswick has some great advice when it comes to this topic, so expect to hear a lot from him this week! Originally posted by John Brunswick. Let's be honest - content governance is far from an exciting topic. BUT the potential of a very small intranet team creating and maintaining a platform that provides an organization with relevant, high value information, helping workers to get their jobs done with greater accuracy and in less time is exciting. It is easy to quickly start producing content, but the challenge is ensuring that the environment is easy to navigate and use on the third week and during the third year.   What can be done to bridge this gap? Over the next few blog entries let's take a pragmatic, minimalistic view of a process that can help any team manage a wealth of unstructured information. Based on an earlier article that I wrote around Portal Governance, I am going to focus on using technology as much as possible to support the governance of content with minimal involvement from users. The only certainty about content production is that business users are not fans of maintaining content. Maintenance is overhead and is a long-term investment thats value will possibly not be realized under the current content creator's watch. To add context to how we will use technical tools in this process, each post will highlight one section of the content lifecycle process as outlined below Content Lifecycle Stages 1. Request - Understand the education, purpose, resource and success criteria for content 2. Create - Determine access and workflow for content 3. Manage - Understand ownership and review cycles 4. Retire - Act on thresholds established during the request stage Within each state we will also elaborate as to 1. Why - why would we entertain doing this? 2. How - the steps that are needed to make it happen 3. Impact - what is the net benefit or loss based on the process Over the course of this week, we will dive deep into the stages and the minimal amount of time, effort and process within each to make some meaningful gains in the improvement of user experience and productivity in their search for information. It might be a stretch to say that we can make content governance exciting, but hopefully it can end up being painless and paying dividends. And if you'd like to hear first hand from a customer that is managing their content lifecycle with Oracle WebCenter, be sure to join us on Wednesday for this webcast "ResCare Solves Content Lifecycle Challenges with Oracle WebCenter"!

    Read the article

  • Perfect is the enemy of “Good Enough”

    - by Daniel Moth
    This is one of the quotes that I was against, but now it is totally part of my core beliefs: "Perfect is the enemy of Good Enough" Folks used to share this quote a lot with me in my early career and my frequent interpretation was that they were incompetent people that were satisfied with mediocrity, i.e. I ignored them and their advice. (Yes, I went through an arrogance phase). I later "grew up" and "realized" that they were missing the point, so instead of ignoring them I would retort: "Of course we have to aim for perfection, because as human beings we'll never achieve perfection, so by aiming for perfection we will indeed achieve good enough results". (Yes, I went through a smart ass phase). Later I grew up a bit more and "understood" that what I was really being told is to finish my work earlier and move on to other things because by trying to perfect that one thing, another N things that I was responsible for were suffering by not getting my attention - all things on my plate need to move beyond the line, not just one of them to go way over the line. It is really a statement of increasing scale and scope. To put it in other words, getting PASS grades on 10 things is better than getting an A+ with distinction on 1-2 and a FAIL on the rest. Instead of saying “I am able to do very well these X items” it is best if you can say I can do well enough on these X * Y items”, where Y > 1. That is how breadth impact is achieved. In the future, I may grow up again and have a different interpretation, but for now - even though I secretly try to "perfect" things, I try not to do that at the expense of other responsibilities. This means that I haven't had anybody quote that saying to me in a while (or perhaps my quality of work has dropped so much that it doesn't apply to me any more - who knows :-)). Wikipedia attributes the quote to Voltaire and it also makes connections to the “Law of diminishing returns”, and to the “80-20 rule” or “Pareto principle”… it commonly takes 20% of the full time to complete 80% of a task while to complete the last 20% of a task takes 80% of the effort …check out the Wikipedia entry on “Perfect is the enemy of Good” and its links. Also use your favorite search engine to search and see what others are saying (Bing, Google) – it is worth internalizing this in a way that makes sense to you… Comments about this post by Daniel Moth welcome at the original blog.

    Read the article

  • My 2011 Professional Development Goals

    - by kerry
    I thought it might be a good idea to post some professional goals for 2011.  Hopefully, I can look at this list at the end of the year and have accomplished most of them. Release an Android app to the marketplace – I figured I would put this first because I have one that I have been working on for a while and it is about ready.  Along with this, I would like to start another one and continue to develop my Android skills. Contribute free software to the community – Again, I have an SMF plugin that will fill this requirement nicely.  Just need to give it some polish and release it.  That’s not all, I would like to add a few more libraries on github, or possibly contribute to an open source project. Regularly attend a user group meetings outside of Java – A great way to meet people and learn new things. Obtain the Oracle Certified Web Developer Certification – I got the SCJP a few years ago and would like to obtain another one.  One step closer to Certified Enterprise Architect. Learn scala – As a language geek, I like to stick to the Pragmatic Programmer’s ‘learn a new language every year’ rule (last year was Ruby).  Scala presents some new concepts all wrapped in a JVM-based OOP language.  Time to dig in. Write an app using JSF – New JEE 6 features are pretty slick.  I want to really leverage them in an app. Present at a user group meeting – Last but not least, I would like to improve my public speaking and skills in presenting.  Also, is a great reason to dig in to some latest and greatest tech. Use git more, and more effectively – Trying to move all my personal projects from Subversion to Git. That’s it.  A little daunting, but I am confident I can at least touch on most of these and it’s a great roadmap to my professional development.

    Read the article

  • (SOLVED) Problems Rendering Text in OpenGL Using FreeType

    - by Sean M.
    I've been following both the FreeType2 tutorial and the WikiBooks tuorial, trying to combine things from them both in order to load and render fonts using the FreeType library. I used the font loading code from the FreeType2 tutorial and tried to implement the rendering code from the wikibooks tutorial (tried being the keyword as I'm still trying to learn model OpenGL, I'm using 3.2). Everything loads correctly and I have the shader program to render the text with working, but I can't get the text to render. I'm 99% sure that it has something to do with how I cam passing data to the shader, or how I set up the screen. These are the code segments that handle OpenGL initialization, as well as Font initialization and rendering: //Init glfw if (!glfwInit()) { fprintf(stderr, "GLFW Initialization has failed!\n"); exit(EXIT_FAILURE); } printf("GLFW Initialized.\n"); //Process the command line arguments processCmdArgs(argc, argv); //Create the window glfwWindowHint(GLFW_SAMPLES, g_aaSamples); glfwWindowHint(GLFW_CONTEXT_VERSION_MAJOR, 3); glfwWindowHint(GLFW_CONTEXT_VERSION_MINOR, 2); g_mainWindow = glfwCreateWindow(g_screenWidth, g_screenHeight, "Voxel Shipyard", g_fullScreen ? glfwGetPrimaryMonitor() : nullptr, nullptr); if (!g_mainWindow) { fprintf(stderr, "Could not create GLFW window!\n"); closeOGL(); exit(EXIT_FAILURE); } glfwMakeContextCurrent(g_mainWindow); printf("Window and OpenGL rendering context created.\n"); glClearColor(0.2f, 0.2f, 0.2f, 1.0f); //Are these necessary for Modern OpenGL (3.0+)? glViewport(0, 0, g_screenWidth, g_screenHeight); glOrtho(0, g_screenWidth, g_screenHeight, 0, -1, 1); //Init glew int err = glewInit(); if (err != GLEW_OK) { fprintf(stderr, "GLEW initialization failed!\n"); fprintf(stderr, "%s\n", glewGetErrorString(err)); closeOGL(); exit(EXIT_FAILURE); } printf("GLEW initialized.\n"); Here is the font file (it's slightly too big to post): CFont.h/CFont.cpp Here is the solution zipped up: [solution] (https://dl.dropboxusercontent.com/u/36062916/VoxelShipyard.zip), if anyone feels they need the entire solution. If anyone could take a look at the code, it would be greatly appreciated. Also if someone has a tutorial that is a little more user friendly, that would also be appreciated. Thanks.

    Read the article

  • New Features Of WordPress 3.3 You Must Know

    - by Gopinath
    After months of beta testing, WordPress 3.3 version is going to be released at the end of this month. There are several new features packed in the new version and few of them are going to excite WordPress admins. In this post we are going to discuss about the exciting new features. 1. Drag and Drop Media Uploads One of the biggest improvements in this version of WordPress is it’s all new media uploader. Now you can upload multiple files by just dragging & dropping, instantly resize  the images and filter files by their type. The media upload sports a brand new look WordPress adopted the Pupload plugin to power its media uploader component and it’s written by the same team who created the popular TinyMCE editor plugin. 2. Improved Admin Bar(Toolbar) The admin bar or newly called toolbar has got handful of makeovers. The not so much used items like Search box and other elements are removed to make sure that the bar is not clumsy. The user menu and the related options are moved to the right like how we see in Google’s user bar. Also there are few changes to the colour of the bar to make it more eye friendly. 3. Fly out Admin Menus All the left side bar menus of WordPress admin are now sports a fly out menu style to save a click. In the previous versions if you want to access a sub menu on the left side bar, you need to first click on the category and then choose the menu item from the expanded list. Now on just mouse over you will see a flyout of menu items. 4. Adaptive Admin – Layout Auto Adjust To Fit Various Devices If you own an iPad or any other so called tablets then you are going to love this feature. The admin site of WordPress has got a lot more friendly with tablets and smartphones. WordPress now auto adjusts layout to fit the device through which you are accessing the admin site.  Accessing admin dashboard on your tablets is going to be more fun. 5. Other Features Now that we have read the most useful 4 features here is a small list of other features that may interest you Nice Tooltips are displayed where ever possible to help the newbies to understand the usage of admin site Responsive Layouts jQuery 1.7 and jQuery UI 1.8.16 are the power horses of WordPress Performance improvements This article titled,New Features Of WordPress 3.3 You Must Know, was originally published at Tech Dreams. Grab our rss feed or fan us on Facebook to get updates from us.

    Read the article

< Previous Page | 605 606 607 608 609 610 611 612 613 614 615 616  | Next Page >