Search Results

Search found 4504 results on 181 pages for 'cut and paste'.

Page 61/181 | < Previous Page | 57 58 59 60 61 62 63 64 65 66 67 68  | Next Page >

  • Is there a mouse trail option?

    - by Tarlung
    I have intermittent blindness in my right eye. Windows had a great mouse option that made a trail of cursors behind the one that's functional. It made my mouse easier to see. The control button helps me find my mouse, but I need something to help me track it as it moves. Any help appreciated. Thanks in advance! PS: I prefer bash shell installs, copy paste easier then having to read small download link on websites.

    Read the article

  • Ubuntu 13.04 not detecting operating system Windows 8

    - by hualur
    I have a Samsung NP740U3E with pre-installed Windows 8 (boots with UEFI). I installed Ubuntu 13.04 without problems. Later, Windows 8 did a BIOS update which messed up everything, nothing would boot. I recovered everything and went back to fabric settings. Now Windows 8 works fine, but when I try to install Ubuntu it does not detect any operating system, so I can`t install Ubuntu alongside Windows. I`ve googled as much as I can, ran a boot-repair, disabled fast- and secure-boot. I have a GPT disc, been looking into gdisk without luck. Here`s my boot-repair summary http://paste.ubuntu.com/5835719/ Is it necessary to convert the GPT disc to MBR? Is it possible to hard-reset the disc "even more" than fabric settings? Thanks in advance.

    Read the article

  • Ubuntu 12.04 installer does not recognize Windows 7

    - by trainofk
    I recently purchased an ASUS N56VZ-ES71 laptop which came with Windows 7 Home Premium installed on it. I wish to dual boot Windows 7 and Ubuntu 12.04 on it. I shrank the hard drive partitions to leave about 150 GB unallocated for Ubuntu 12.04. When I boot the Live CD of Ubuntu and attempt to install, the installer does not recognize any other operating systems. Through reading a few questions, I have found that this is due to a GPT partitioning table that Windows uses. I ran boot-repair as per other threads' suggestions. This was my output: http://paste.ubuntu.com/1176988/ I suppose my question is: how do I proceed in order to get the installer to recognize Windows, so that I don't have to erase the current partition table and can get a safe install? Thanks in advance.

    Read the article

  • System crashed while upgrading, now unable to recover. Please help

    - by longloop
    Yesterday while upgrading from 11.4 to 11.10, due to power cut my system crashed. Ubuntu is unable to boot. While booting I get two options in grub, one is for recovery mode and the other is for normal ubuntu booting (and others are also thr for mem check and booting to windows). When I try to boot it normally, it pauses booting while displaying ' Checking battery statues' . Though i am not using a laptop, I am on a desktop. And In recovery mode the menu has 4 options - resume boot, fsck , remount and root ( to goto shell prompt) . If I go to shell and type ' apt-get dist upgrade' , it shows - W: not using locking for read only lock file /var/lib/dpkg/lock E:unable to write to /var/cache/apt E:The package lists or status files could not be parsed or opened. Please instruct me to recover from this situation.

    Read the article

  • ASUS U24a can't boot without live disk

    - by user98965
    I recently picked up a new ASUS U24a while travelling in asia. I've managed to go through hell with the UEFI setup, and finally now have a working GRUB. However, I can't manage to get past the "Loading initial ramdisk". If I boot the live CD-USB (only in BIOS legacy mode), I get a wonderful, working Ubuntu. I finally managed to get UEFI installed on the hard-drive (no option for legacy BIOS boot, or I'd be there in a flash!), and can boot in UEFI mode into GRUB2. But... I can't manage to get past the "loading initial ramdisk". It appears that the disk drivers are failing (there is no disk activity after this point). Ideas? pastebin from the boot-repair is at: http://paste.ubuntu.com/1290011/ best, -tony

    Read the article

  • Why I can't open folders copied from Ubuntu on Windows?

    - by user37805
    Is not possible for me to open whatever folder I copy from Ubuntu to my Windows partition or whatever usb memory. Windows says the folder's location is either disconnected or doesn't exist. Can't copy, cut or delete the folder on Windows but with Ubuntu I can. This happens even if I create the folder on the ntfs disc. I have never had this problem before. Files are openable however, but not if they are inside a folder. This started after I haven't made any other changes except for the update to kernel 3.2.0-30-generic, I am using 12.04, never installed Samba, after this problem started I tried to fix it by installing ntfs-3f, ntfsprogs, ntfs-config, but It didn't work.

    Read the article

  • How to Automate Checking for Stolen Content?

    - by Hisoka
    So I know about tools like Copyscape and Google Alerts.. great tools, but it's quite tedious for me to copy and paste an URL or phrase for every one of my pages in my sites. Is there any tool out there that monitors your website and emails you or alerts you whenever someone has stolen content from your site? The only service I know is CopySentry and honestly, it's too expensive for me since I got thousands of pages I want to monitor... Anyone else have this problem? or is it just me? Thanks for any help.

    Read the article

  • Xubuntu - Apps Become Unresponsive Intermittently

    - by Levinaris
    Possibly Relevant Information: XUbuntu 12.04 LTS (precise) XFCE 4.8 AMD Graphics (Kernel driver in use: fglrx_pci, Kernel modules: fglrx, radeon) The primary symptom of this issue has been my active rdesktop session to stop responding while everything else appears to work normally. I have been killing rdesktop and re-launching it, with it freezing after a seemingly random time period. The fastest was within seconds. The longest was a couple hours, although it's usually within a few minutes. That being said, I have occasionally seen the terminal and web browsers also become unresponsive to keyboard input. They respond to clicks and will accept middle clicks (to paste text) without issue while remaining unresponsive to the keyboard input. I have been able to restore all functionality, including rdesktop, by switching workspaces and typing on the other workspace, then returning to the original workspace. What is being reset when I do this? What does this work-around/solution indicate may be the problem?

    Read the article

  • eth0 missing after upgrading from Hoary to Dapper

    - by Twisol
    I'm trying to upgrade a fairly old server that's been running Hoary for the last five years. I followed the directions on the wiki, but when I restarted after upgrading to Dapper, eth0 disappeared from ifconfig -a. I can see two ethernet adapters in lspci and lshw, and if I put in an Ubuntu 10.10 LiveCD it registers eth0 and eth1 perfectly well. Their MAC addresses also match what's in /etc/iftab. It was working fine before the upgrade, and I have no idea what else I should be trying at this point. The server is entirely cut off from the network right now. EDIT: /etc/udev/rules.d/70-persistent-net.rules doesn't exist, either.

    Read the article

  • Ubuntu 12.04 ATI 6450

    - by user210717
    Right now my video card isn't responding after the Ubuntu Logo is shown, (I see a black screen and that's it) I have installed ubuntu 12.04 AMD64 and if I remove the video card and use the VGA from the MOBO then I can use it with no problems, other data: 4 GB of ram 1333 500 GB WD AMD APU A6 3500 2,1 GHZ I forgot a couple of details, everything was working great until last night, when the light went off (I don't know if I'm explaining myself I'm from Argentina and english isn't my first language there was a power cut I meant) and then when it got back I used my pc until I went to bed (after upgrading) and this morning, when I woke up I had this problem for breakfast, I've been reading a little and I had a similar problem before and fixed it, but it was a system problem, a missing package or something, I don't remember, but here the only issue is that the video card doesn't give me image after the ubuntu logo.

    Read the article

  • Can't boot after disk error 12.10

    - by user1189907
    Lately, I've been having Ubuntu crashing randomly.. it goes into read only mode, but once I restart it's working again. Today it happened again and I had to manually shut the computer down. Now I'm not able to boot anymore. I get the following when turning the computer on: error: unknown filesystem And I'm left at "grub rescue". I booted from the Live CD and installed "boot-repair". When I run it it says "no os has been found on this computer", it gives me no option to carry out any fixes. Boot Repair generated the following output which shows some errors: http://paste.ubuntu.com/1348224/ Any idea on how to fix this?

    Read the article

  • Should the networking of my game be a component or a service?

    - by aalcutt
    I am working on a windows game and I am trying to understand the XNA GameComponents and GameServices classes and use. From what I understand about a component is that it has an Update method that gets call in every frame, and a service can be referenced from other components if needed. So the way I think a network component would work is that in its Update method it would receive and send data. It probably makes sense to receive the network data once per frame, but it doesn't for sending it. Shouldn't the game send its own updates to others the moment it has it to cut down on lag?

    Read the article

  • sound cuts out at random times

    - by jayb151
    Since I updated to 14.04, I have been having a problem with my sound. Every once in a while it "skips a beat." and when I say every once in a while, I mean 2-4 times a minute. It's literally that the sounds goes a way for about half a second. It doesn't pick up where it left off, but rather continues from where it should be...if that makes sense. So, if it cut in mid word, I wouldn't hear the end of the word. I didn't have this problem before I updated from 12.04. There is no popping or static, it just cuts for a fraction of a second. Any thoughts? Thanks!

    Read the article

  • PC powers off at random times

    - by Timo Huovinen
    Short Version After experiencing some problems with Mobo batteries my PC started to power off at random times, the power off is instant and sudden and does not restart afterwards, need help figuring out the cause. Facts: Powers off when PC is playing games Powers off when PC is idle Powers off when PC is in safe mode Powers off when PC is in BIOS Powers off when PC is booted through a Windows installation USB Replaced the motherboard battery several times Replaced the 650W PSU with a 750W PSU Replaced the RAM Swapped the RAM between slots Re-applied thermal paste to the CPU Checked if the motherboard touches the case Nothing is overclocked PC Specs PC specs: OS: Windows 7 Ultimate SP1 RAM: klingston 1333MHz 4GB stick CPU: AMD Phenom II x4 955 Mobo: Gigabyte 88GMA-UD2H rev 2.2 Motherboard battery: CR2032 3v HDD: 500GB Seagate ST3500418AS ATA Device Graphics: ATI/AMD Radeon HD 6870 Very Long version Around 10 months ago I built a brand new gaming PC. Around 6 months ago it's time setting in windows started resetting to the year 2010. I swapped the Motherboard battery for a new one of the exact same size and shape and voltage, and the problems disappeared...for around 2 weeks. Then the same problem happened again, time gets reset, I swapped the battery again, and the problem was gone for good and everything was great for about 3 months.. then another problem started happening, the PC started to power off suddenly and without warning at completely random times, sometimes the PC works for and hour, sometimes 5 minutes. So I read on the forums that it might be either the PSU or the motherboard Battery or RAM or HDD or the Graphics card or the CPU or the motherboard or the drivers or a Virus or Grounding issues, or something short circuiting, basically it can be anything... I spent some days researching, and decided to remove the possibility of a virus. I reset the CMOS, cleared all BIOS settings and reinstalled windows 7 after a full format of the HDD, but the random power off kept happening. I then disabled the restart on error option in windows and looked at the event log for error events, but they did not help me figure out the problem. Network list service depends on network location awareness the dependency group failed to start Source Kernel Power Event 41 Task Category 63 Source Disk Event ID 11 Task Category None The driver detected a controller error on device disk I took apart the PC, every little piece, re-applied some expensive thermal paste to the CPU, and double checked that none of the pieces are touching the PC case. The problem was gone, the PC no longer powered off randomly I re-attached the graphics card and all was good for 4 months... then the power off problem appeared again, but was happening at high intervals, the PC would shutdown once in 2 days on average, at random points in time, sometimes when it's idle all day long, sometimes when it's running CRYSIS 2. I checked the CPU temperature, because I know that AMD CPU's have a built in protection mechanism that switches off the PC if the CPU gets too hot, and the Temp was 50C system temp, and 45C CPU after running the PC all day long (I did not do tests to see if there are any temperature spikes, don't know how to do them) Originally the PSU that powered the PC was 650Watts and had one 4 pin cable to power the CPU, I replaced it with a new 750Watts PSU which has two 4 pin cables for the CPU, but the problem remained. I removed the graphics card and let the motherboard use the built in one, but the PC kept suddenly powering off at random times. I took apart the PC completely again, and re-applied thermal paste to the CPU, added lots of insulation, and checked for any type of short-circuit possibility again and again, but the problem remained. The problem was like that for some months. I replaced the Battery a couple of times over the time, changed lots of options in windows, and tried everything I could, but it kept powering off, so I stopped using the PC as much as I used to, just living with the random power offs from time to time, until a couple of days ago, when the power off happens almost immediately after powering on the PC. I replaced the RAM with a brand new one, but that did not help. Took apart the PC again, checked for anything anywhere that might cause it, found some small scratches on the very edge of the motherboard to the left of the PCI express x16 slot. This might cause the problem, I thought, but the scratch looks very superficial, not deep at all, and if the scratch did harm the motherboard, wouldn't it cause it to not start at all? And why did it start to power off a while ago, and then suddenly stop powering off? The scratches could not have vanished??? did chkdsk \d but it powered off when it was at 75% I removed the hard disks, the graphics card, while I fiddled with the BIOS settings, and suddenly the PC shut down while I was looking at the BIOS version. This makes me realize, it is not caused by: HDD, Windows, Drivers or the Graphics card I cleared the CMOS again, updated the BIOS from F5 to F6f beta, but that did not help, it might even seem that the PC powers off even sooner. The shutdown even happened to me while I booted through a windows 7 installation USB and was in the repair console. I removed one of the cables powering the CPU, now only one 4pin cable powers it, and it worked for 30mins after doing that, which makes me think that it's the CPU overheating, and because it gets less power, it overheats slower? The things that I am still considering: CPU overheating (does not seem to overheat, maybe false readings?) Motherboard short circuiting (faulty motherboard?) I desperately need some advice in what is faulty, is it a faulty Motherboard or an overheating CPU? or maybe something else? I have been breaking my head over this problem over a span of 6 months. I'm not sure if this is a good place to ask this question, if it is not, then tell me where I can get some experienced help. More info I have also discovered a mysterious piece that seems to have fallen out of the motherboard i119.photobucket.com/albums/o126/yurikolovsky/strangepiece.jpg What is it? Looks like each time that it powers off the datetime gets reset I also found another forum post tomshardware.co.uk/forum/… except I don't have Integrated PeripheralsUSB Keyboard Function option in BIOS :S Comments summary (asked by Random moderator) Q. tell me, if the computer restarts, is it immediately? Does it take a second and then restarts? Do you see (BSOD) or hear (PSU, short circuit) any suspicious when it happens? After reading trough it, it remains the mainboard that is faulty. – JohannesM A. Immediate power off, all the fans stop instantly, all the light turn off instantly, no sound or anything, and it remains off until I turn it back on. Thanks for the feedback, faulty motherboard is what I fear. Q. Try stress-testing the system with Prime95 and see if errors or shutdowns occur when the CPU is under full load. – speakr A. Prime95 heat stress test peaked CPU heat at 60C after 5mins, it powered off after 30mins of testing in the middle of the test with no errors, Prime95 Heat test or the stress-testing with low RAM usage (small or in-place FFTs) do not report errors while testing for 10-60 mins. The power off does not seem like it is affected by Prime95 at all Makes me wonder if it's a CPU or Motherboard issue at all. Q. I had similar random/intermittent problems with my old board. It gave one of a few different symptoms: keyboard and/or mouse would die and/or the RAM wouldn't work and/or it would shut down. It was in bad shape. One problems was that my old PSU had literally burned the connector on it (browned around the pins), another was that a broken lead inside the layers of the PCB would work sometimes if it happened to be hot or if I bent the board—by jamming a hunk of wood behind it. I managed to keep the board alive for several years, but eventually nothing I did would make it work correctly anymore. – Synetech A. I will try that as the last resort, ok? ;) Q. Have you tried a different power cord, surge protector, outlet (on a different circuit). It's worth a shot just to ensure it's not subpar wiring or a week circuit (dips in power may cause shutdown if the PSU can't pull enough juice from the wall). – Kyle A. yes, I attached the PC to an entirely different outlet on a different circuit and the problem persists. After connecting it to a different outlet after starting the PC it gave me 3 long beeps and 1 short one, then the PC immediately proceeded to boot up normally. Q. Re-check your mainboard manual and all PSU connections to your mainboard to be sure that nothing is missing (e.g. 12V ATX 4-pin/6-pin connector). If you can provoke shutdowns with Prime95, then consider buying new hardware -- a stable system should run Prime95 for 24h without any errors. Prime95 mentions errors in the log when they occur and gives a summary after the stress test was stopped manually (e.g. "0 errors, 0 warnings", if all is fine) – speakr A. Re-checked, there are no more PSU connectors that I can physically connect, except the one ATX 4-pin (there are 2 that power the CPU) that I disconnected on purpose, I have reconnected it but the problem persists. Q. With one PC I had a short curcuit. The power button on the front plate had its cables soldered, but not isolated, and the contacts were very close to the metal case. A heavier touch was enough to cause a shutdown. The PC's vibration could be enough – ott-- A. yes, it seems to switch off with even the lightest touch, I switched on the PC, then pulled out the front panel power cable that connects to the motherboard so the power button does not work anymore, after 5 mins of working like that, with the power button completely disconnected, just sitting idle, the PC powered off again, I don't think it's the power button. Q. I wonder if you dare to operate components without the case, that is remove motherboard, power, disk ( just put the motherboard on a wooden desk). Don't bend the adapters when running like that. – ott-- A. yes, I do dare to do that, but only tomorrow, too tired/late right now.

    Read the article

  • Convert excel document (xls) to a plist

    - by John
    I have a pretty straightforward excel document in which I need to use the data in an iPhone app. The xls document has 6 columns, 200 plus rows. I would like to create a plist from the xls document and other than manual copy/paste, is there a means to convert one to the other? Anyone written a macro on the excel side or a utility (perl, etc) to make such a conversion? Thanks John iPhoneDevTips

    Read the article

  • WPF: Xaml, create an observable collection<object> in xaml in Dot Net 4.0

    - by Aran Mulholland
    the web site says you can in dot net 4.0 I cant seem to do it though, what assesmbly references and xmlns' do i need the following does not work xmlns:coll="clr-namespace:System.Collections.ObjectModel;assembly=mscorlib" <coll:ObservableCollection x:TypeArguments="x:Object"> <MenuItem Command="ApplicationCommands.Cut"/> <MenuItem Command="ApplicationCommands.Copy"/> <MenuItem Command="ApplicationCommands.Paste"/> </coll:ObservableCollection>

    Read the article

  • WPF: Xaml, create an observable collection<object> in xaml in .NET 4.0

    - by Aran Mulholland
    the web site says you can in .NET 4.0 I cant seem to do it though, what assesmbly references and xmlns' do i need the following does not work xmlns:coll="clr-namespace:System.Collections.ObjectModel;assembly=mscorlib" <coll:ObservableCollection x:TypeArguments="x:Object"> <MenuItem Command="ApplicationCommands.Cut"/> <MenuItem Command="ApplicationCommands.Copy"/> <MenuItem Command="ApplicationCommands.Paste"/> </coll:ObservableCollection>

    Read the article

  • Add Embebded HTML Code withut rendering on HTML Email

    - by Suneth Kalhara
    I creating HTML email but i need to send some html code without rendering (because this code for user he can copy and paste the code on there website) i need to send this code without rendering on html email, i tried code and pre tags but no luck <a href="###"><img src="####" width="300" height="250" border="0" alt="####/><br />Watch Local Cam</a> is there any way to do this

    Read the article

  • VS2010 Extension like Smart Paster?

    - by Eric J.
    Alex Papadimoulis' Smart Paster is a great little tool that can paste text in programmer-friendly ways (e.g. as a StringBuilder, as a language-specific string literal, etc.). However, it doesn't seem to be available for VS2010. Anyone know of a similar extension or of plans to port Smart Paster?

    Read the article

  • Silverlight Bing Maps - Pushpin

    - by user70192
    How do I make the Silverlight Bing Maps pushpin larger? The reason I want to make it larger is so that I can add more content into the head of the pushpin. However, I cannot figure out how to add the content I want to the head of the pushpin without it being cut off. Thank you,

    Read the article

  • Exporting data from a YUI DataTable

    - by Bears will eat you
    What's the easiest/fastest way to grab data out of a YUI DataTable and turn it into a single CSV or TSV string? I basically just want to implement a one-click way to get the entire DataTable (it should preserve the currently-applied sorting) into a form that users can paste into a spreadsheet. My DataTable can get pretty big - 5000 to 10000 rows, 5 to 10 columns - so efficiency does matter.

    Read the article

< Previous Page | 57 58 59 60 61 62 63 64 65 66 67 68  | Next Page >