Search Results

Search found 2210 results on 89 pages for 'magic plane'.

Page 61/89 | < Previous Page | 57 58 59 60 61 62 63 64 65 66 67 68  | Next Page >

• Criteria for selecting timeout value?

  - by stijn

  Situation: a piece of software reads frames of data from a file in a seperate thread and puts it on a queue, emptied by another thread. That second thread periodically checks on the queue and fails rather gracefully, by showing an error message stating the read timed out, if no data is available within a certain amount of time. Initially this timeout was set to 200mSec. There was no real reasoning behind that constant though, but it worked fine. We measured on a couple of machines and for large data frames, larger than what would be used by customers, a read took like 20mSec whith no other load on the machine. However one customer now gets timeout errors now and then (on the second try all is fine, probably the file is in cache or the virus scanner leaves it alone). The programmers are like 'well, yeah, but that customer's machine is full of cruft, virus scanners, tons of unneeded background processes etc'. Of course the customer is like 'hey this should just work, shouldn't it'? While the programers have a point, since the software is heavy enough to validate the need for a dedicated machine, that does not make the customer happy. Increasing the timeout to 2 seconds, for example, solves the problem. But I'd like to make a proper decision now instead of just randomly pick some magic constant that is probably ok in 99% of cases. What criteria should be used for that? We could just pick a large number, but that feels wrong. (and then we end up with a program that has the horrible bahaviour of hanging when trying to read from a disconnected drive for instance, whereas we'd rather make it show an error right away). Or we could make the timeout value a user setting, but then we need to ducument it clearly and even then not all customers are tech savy enough to really understand what it does. Or we could try and wait until another customer reports timeouts and increase the value again. And again. Until we find something ok for 99.99% of the cases.. Any good practice for this type of situation?

  Read the article

• Modelling highly specific business requirements

  - by AndyBursh

  How can one go about modelling highly specific business requirements, which have no precedent in the system? Take for example the following requirement: When a purchase order contains N lines, is over X value in total and is being recorded against project Y, an email needs to be sent to persons A and B with the details This requirement supplements other requirements surrounding purchase orders, but comes in at a much later date in response to some ongoing problem elsewhere in the business. Persons A and B are not part of any role or group in the system, and don't hold any specific responsibility; they are simply the two people the business has appointed to receive these emails in this very specific case. Projects are also data driven, so project Y has no special properties to distinguish it from any other project. The only way to identify it is to compare its identifier to a magic number. How can one go about modelling this kind of case without introducing too much additional complexity? That I can think of right now, there are a couple of options. Perform the checks and actions inline with the existing code. Here we find the correct spot in the code, check the conditions in the requirement and send the emails to hardcoded addresses. Of course this is fraught with issues. At the very least it stops working if one of these people leaves or changes their email address. At worst you have to ensure that any tests and test data are aware that additional actions are taken for a specific set of criteria. Introduce some form of events system. Here we introduce an eventing system, so that we might react to some event, and fulfil the requirement outside of the usual path of execution. This sounds like a cleaner solution than option 1, but the work involved is ultimately probably slightly overkill for this one small requirement. That said, having it in place does allow the system to handle these kinds of specific requirements consistently and easily in the future. Are there any other (good/better) ways of handling highly specific requirements? I mean other than telling the other parts of the business no!

  Read the article

• Upgrades from Beta or CTP SQL Server Software is NOT Supported

  - by BuckWoody

  As of this writing, SQL Server 2008 R2 has released, and just like every release, I get e-mails and calls from folks with this question: “Can I upgrade from Customer Technical Preview (CTP) x or Beta #x or Release Candidate (RC) to the “Released to Manufacturing” (RTM) version?” No. Right up until the last minute, things are changing in the code – and you want that to happen. Our internal testing runs right up until the second we lock down for release, and we watch the CTP/RC/Beta reports to make sure there are no show-stoppers, and fix what we find. And it’s not just “big” changes you need to worry about – a simple change in one line of code can have a massive effect. I know, I know – you’ve possibly upgraded an RC or CTP to the RTM version and it worked “just fine”. But hear this tale: I’ve dealt with someone who faced this exact situation in SQL Server 2008. They upgraded (which is clearly prohibited in the documentation) from a CTP to the RTM version over a year ago. Everything was working fine. But then…one day they had an issue. Couldn’t fix it themselves, we took a look, days went by, and we finally had to call in the big guns for support. Turns out, the upgrade was the problem. So we had to come up with some elaborate schemes to get the system migrated over while they were in production. This was painful for everyone involved. So the answer is still no. Just don’t do it. There is one caveat to this story – if you are a “TAP” customer (you’ll know if you are), we help you move from the CTP products to RTM, but that’s a special case that we track carefully and send along special instructions and tools to help you along. That level of effort isn’t possible on a large scale, so it’s not just a magic tool that we run to upgrade from CTP to RTM. So again, unless you’re a TAP customer, it’s a no-no. Share this post: email it! | bookmark it! | digg it! | reddit! | kick it! | live it!

  Read the article

• PHP - Internal APIs/Libraries - What makes sense?

  - by Mark Locker

  I've been having a discussion lately with some colleagues about the best way to approach a new project, and thought it'd be interesting to get some external thoughts thrown into the mix. Basically, we're redeveloping a fairly large site (written in PHP) and have differing opinions on how the platform should be setup. Requirements: The platform will need to support multiple internal websites, as well as external (non-PHP) projects which at the moment consist of a mobile app and a toolbar. We have no plans/need in the foreseeable future to open up an API externally (for use in products other than our own). My opinion: We should have a library of well documented native model classes which can be shared between projects. These models will represent everything in our database and can take advantage of object orientated features such as inheritance, traits, magic methods, etc. etc. As well as employing ORM. We can then add an API layer on top of these models which can basically accept requests and route them to the appropriate methods, translating the response so that it can be used platform independently. This routing for each method can be setup as and when it's required. Their opinion: We should have a single HTTP API which is used by all projects (internal PHP ones or otherwise). My thoughts: To me, there are a number of issues with using the sole HTTP API approach: It will be very expensive performance wise. One page request will result in several additional http requests (which although local, are still ones that Apache will need to handle). You'll lose all of the best features PHP has for OO development. From simple inheritance, to employing the likes of ORM which can save you writing a lot of code. For internal projects, the actual process makes me cringe. To get a users name, for example, a request would go out of our box, over the LAN, back in, then run through a script which calls a method, JSON encodes the output and feeds that back. That would then need to be JSON decoded, and be presented as an array ready to use. Working with arrays, as appose to objects, makes me sad in a modern PHP framework. Their thoughts (and my responses): Having one method of doing thing keeps things simple. - You'd only do things differently if you were using a different language anyway. It will become robust. - Seeing as the API will run off the library of models, I think my option would be just as robust. What do you think? I'd be really interested to hear the thoughts of others on this, especially as opinions on both sides are not founded on any past experience.

  Read the article

• How best to look up objects by label?

  - by dsollen

  I am writing the server backed by a pre-written API. I'm going to get a number of strings representing ports, signals, paths, etc etc etc. I need to look up the object associated with a given label, these objects are all in memory (no sql magic to do this for me). My question is, how best do I associate a given unique label with the mutable object it represents? I have enough objects that looking through every signal or every port to find the one that matches is possible, but may be slightly too slow. To be honest the direct 'look at every object' method is probably good enough for so small a body of objects and anything else is premature optimization, but I still am curious what the proper solution would be if I thought my signals were going to grow a bit larger. As I see it there are two options available. First would be to to create a 'store' that is a simple map between object and label. I could have it so that every time I call addObject the object is automatically saved into a hashmap or the like. This works, but relies on my properly adding and deleting each object so the map doesn't grow indefinitely. The biggest issue to me is that this involves having some hidden static map in my ModelObject class that just feels...wrong somehow. The other option is to have some method that can interpret the labels. All of these labels are derived from the underlying objects. So I can look at the signal label, for instance, and say "these 20 characters are the port" to figure out what port I need. This would allow me to quickly figure out what I need. However, if the label method is changed the translateLabelToObject method needs to be updated as well or everything breaks. Which solution is cleaner, or possibly a cleaner solution than either of above? For the record I'm working with sufficient number of variables to make direct comparison a little slow, but not enough to be concerned about memory overhead, written in java. All objects that have labels I need to look up extend the same parent class.

  Read the article

• Advantages to Multiple Methods over Switch

  - by tandu

  I received a code review from a senior developer today asking "By the way, what is your objection to dispatching functions by way of a switch statement?" I have read in many places about how pumping an argument through switch to call methods is bad OOP, not as extensible, etc. However, I can't really come up with a definitive answer for him. I would like to settle this for myself once and for all. Here are our competing code suggestions (php used as an example, but can apply more universally): class Switch { public function go($arg) { switch ($arg) { case "one": echo "one\n"; break; case "two": echo "two\n"; break; case "three": echo "three\n"; break; default: throw new Exception("Unknown call: $arg"); break; } } } class Oop { public function go_one() { echo "one\n"; } public function go_two() { echo "two\n"; } public function go_three() { echo "three\n"; } public function __call($_, $__) { throw new Exception("Unknown call $_ with arguments: " . print_r($__, true)); } } Part of his argument was "It (switch method) has a much cleaner way of handling default cases than what you have in the generic __call() magic method." I disagree about the cleanliness and in fact prefer call, but I would like to hear what others have to say. Arguments I can come up with in support of Oop scheme: A bit cleaner in terms of the code you have to write (less, easier to read, less keywords to consider) Not all actions delegated to a single method. Not much difference in execution here, but at least the text is more compartmentalized. In the same vein, another method can be added anywhere in the class instead of a specific spot. Methods are namespaced, which is nice. Does not apply here, but consider a case where Switch::go() operated on a member rather than a parameter. You would have to change the member first, then call the method. For Oop you can call the methods independently at any time. Arguments I can come up with in support of Switch scheme: For the sake of argument, cleaner method of dealing with a default (unknown) request Seems less magical, which might make unfamiliar developers feel more comfortable Anyone have anything to add for either side? I'd like to have a good answer for him.

  Read the article

• URL slugs: ideal length, and the real SEO effects of these slugs

  - by tattvamasi

  this question is addressed widely on SO and outside it, but for some reason, instead of taking it as a good load of great advice, all this information is confusing me. ** Problem ** I already had, on one of my sites, "prettified" urls. I had taken out the query strings, rewritten the URLS, and the link was short enough for me, but had a problem: the ID of the item or post in the URL isn't good for users. One of the users asked is there's a way to get rid of numbers, and I thought it was better for users to just see a clue of the page content in the URL. ** Solution ** With this in mind, I am trying with a section of the site.Armed with 301 redirects, some parsing work, and a lot of patience, I have added the URL slugs to some blog entries, and the slug of the URL reports the title of the article (something close to http://example.com/my-news/terribly-boring-and-long-url-that-replaces-the-number-I-liked-so-much/ ** Problems after Solution ** The problem, as I see it, is that now the URL of those blog articles is very descriptive for sure, but it is also impossible to remember. So, this brings me to the same issue I had with my previous problem: if numbers say nothing and can't be remembered, what's the use of these slugs? I prefer to see http://example.com/my-news/1/ than http://example.com/my-news/terribly-boring-and-long-url-that-replaces-the-number-I-liked-so-much/ To avoid forcing my user to memorize my URLS, I have added a script that finds the closest match to the URL you type, and redirects there. This is something I like, because the page now acts as a sort of little search engine, and users can play with the URLS to find articles. ** Open questions ** I still have some open questions, and don't seem to be able to find an answer, because answers tend to contradict one another. 1) How many characters should an URL ideally be long? I've read the magic number 115 and am sticking to that, but am not sure. 2) Is this really good for SEO? One of those blog articles I have redirected, with ID number in the URL and all, ranked second on Google. I've just found this question, and the answer seems to be consistent with what I think URL slug and SEO - structure (but see this other question with the opposite opinion) 3) To make a question with a specific example, would this URL risk to be penalized? Is it acceptable? Is it too long? StackOverflow seems to have comparably long URLs, but I'm not sure it's a winning strategy in my case. I just wanted to facilitate my users without running into Google's algorithms.

  Read the article

• Imperative vs. component based programming [closed]

  - by AlexW

  I've been thinking about how programming and more specifically the teaching of programming is advocated amongst the community (online). Often I've heard that Ruby and RoR is an ideal platform for learning to program. I completely disagree... RoR and Ruby are based on the application of the component based paradigm, which means they are ideal for rapid application development. This is much like the MVC model in PHP and ASP.NET But, learning a proper imperative language like Java or C/C++ (or even Perl and PHP) is the only way for a new programmer to explore logic itself, and not get too bogged down in architectural concerns like the need for separation of concerns, and the preference for components. Maybe it's a personal preference thing. I rather think that the most interesting aspects to programming are the procedural bits of code I write that actually do stuff rather than the project planning, and modelling that comes about from fully object oriented engineering or simply using the MVC model. I know this may sound confused to some of you. I feel strongly though that the best way for programming to be taught is through imperative and procedural methods. Architectural (component) methods come later, if at all. After all, none of the amazing algorithms that exist were based on OOP practice! It's all procedural code when it comes to the 'magic'. OOP is useful in creating products and utilities. Algorithms are what makes things happen, and move data around, and so imperative (and/or procedural) code are what matters most. When I see programmers recommending Ruby on Rails to newbie developers, I think it's just so wrong. Just because you write less code with Ruby does not make it easier to do! It's the opposite... you have to know loads more to appreciate its succinct nature. New coders who really want to understand the nuts and bolts of coding need to go away and figure out writing methods/functions (i.e. imperative programming) and working in procedural style, in order to grasp the fundamentals, first, before looking into architectural ways of working. So, my question is: should Ruby ever be recommended as a first language? I think no (obviously)... what arguments are there for it?

  Read the article

• Can my machine run Ubuntu( kubuntu | xubuntu | mint ) 12.04 WELL?

  - by Steve

  I have a 9 year old computer packing the hardware listed below. My question is, can I run 12.04 ( Ubuntu, Kubuntu, MINT or Xubuntu ) WELL? I was running Ubuntu 10.10 and I upgraded to 12.04 by going through each release via the update manager: 11.04 - 11.10 -12.04 During the installation process for 12.04 I saw an error message that there was an error installing and setting up part of the kernel. Later, when I tried installing a package in synaptic, I got another error message mentioning the kernel. When I rebooted, I got told somehting about my video and graphics was not configured properly and that I would have to do it manually ( like I know ). It gave me the option to enter the system in low graphics mode, but it just hanged. I had an old livecd of Xubuntu 10.10 around so I used that to get into my computer and copy data over to an external hard drive. I think tried to install Xubuntu 10.10 from the livecd, with the option "download updates" checked. The install process moved along a bit, then halted for about 5 hours. I rebooted my machine and tried the Xubuntu 10.10 installer WITHOUT the option to "download updates". The install completed in about 15 minutes. So, all of that is making me wonder if there is someting about 12.04 that does not like my hardware. I'm willing to try again, but only if I know I will not have to spend hours just to get to an error message and a hosed up system like I did last night. I also think I have a lot more RAM than is being reported in the output below. I had extra ram installed last year. I'm not good with the command line readouts, but there seems like there should be a lot more. I wasn't thrilled with Unity. I am willing to try Kubuntu 12.04. Will I run into the same problems? What is the highest version of a *ubuntu can I upgrade to? Thanks CPU Model: Intel(R) Pentium(R) 4 CPU 2.53GHz Frequency: 2533.223 MHz L2 Cache: 512 KB Bogomips: 5066.44 Numbering: family(15) model(2) stepping(7) Flags: fpu vme de pse tsc msr pae mce cx8 apic mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe up pebs bts cid RAM ~$ free -mt total used free shared buffers cached Mem: 1506 891 615 0 91 521 -/+ buffers/cache: 278 1227 Swap: 1609 0 1609 Total: 3116 891 2225 Video Card 01:00.0 VGA compatible controller: nVidia Corporation NV18 [GeForce4 MX 440 AGP 8x] (rev a2) (prog-if 00 [VGA controller]) Subsystem: ASUSTeK Computer Inc. V9180 Magic Flags: bus master, 66MHz, medium devsel, latency 32, IRQ 16 Memory at fd000000 (32-bit, non-prefetchable) [size=16M] Memory at f0000000 (32-bit, prefetchable) [size=64M] Expansion ROM at fe9e0000 [disabled] [size=128K] Kernel driver in use: nouveau Kernel modules: nouveau, nvidiafb Motherboard Intel 845PE ATX 533FSB DDR333 USB2

  Read the article

• Getting a SecurityToken from a RequestSecurityTokenResponse in WIF

  - by Shawn Cicoria

  When you’re working with WIF and WSTrustChannelFactory when you call the Issue operation, you can also request that a RequestSecurityTokenResponse as an out parameter. However, what can you do with that object?  Well, you could keep it around and use it for subsequent calls with the extension method CreateChannelWithIssuedToken – or can you? public static T CreateChannelWithIssuedToken<T>(this ChannelFactory<T> factory, SecurityToken issuedToken);   As you can see from the method signature it takes a SecurityToken – but that’s not present on the RequestSecurityTokenResponse class. However, you can through a little magic get a GenericXmlSecurityToken by means of the following set of extension methods below – just call rstr.GetSecurityTokenFromResponse() – and you’ll get a GenericXmlSecurityToken as a return. public static class TokenHelper { /// <summary> /// Takes a RequestSecurityTokenResponse, pulls out the GenericXmlSecurityToken usable for further WS-Trust calls /// </summary> /// <param name="rstr"></param> /// <returns></returns> public static GenericXmlSecurityToken GetSecurityTokenFromResponse(this RequestSecurityTokenResponse rstr) { var lifeTime = rstr.Lifetime; var appliesTo = rstr.AppliesTo.Uri; var tokenXml = rstr.GetSerializedTokenFromResponse(); var token = GetTokenFromSerializedToken(tokenXml, appliesTo, lifeTime); return token; } /// <summary> /// Provides a token as an XML string. /// </summary> /// <param name="rstr"></param> /// <returns></returns> public static string GetSerializedTokenFromResponse(this RequestSecurityTokenResponse rstr) { var serializedRst = new WSFederationSerializer().GetResponseAsString(rstr, new WSTrustSerializationContext()); return serializedRst; } /// <summary> /// Turns the XML representation of the token back into a GenericXmlSecurityToken. /// </summary> /// <param name="tokenAsXmlString"></param> /// <param name="appliesTo"></param> /// <param name="lifetime"></param> /// <returns></returns> public static GenericXmlSecurityToken GetTokenFromSerializedToken(this string tokenAsXmlString, Uri appliesTo, Lifetime lifetime) { RequestSecurityTokenResponse rstr2 = new WSFederationSerializer().CreateResponse( new SignInResponseMessage(appliesTo, tokenAsXmlString), new WSTrustSerializationContext()); return new GenericXmlSecurityToken( rstr2.RequestedSecurityToken.SecurityTokenXml, new BinarySecretSecurityToken( rstr2.RequestedProofToken.ProtectedKey.GetKeyBytes()), lifetime.Created.HasValue ? lifetime.Created.Value : DateTime.MinValue, lifetime.Expires.HasValue ? lifetime.Expires.Value : DateTime.MaxValue, rstr2.RequestedAttachedReference, rstr2.RequestedUnattachedReference, null); } }

  Read the article

• PSU failing or Mainboard failing?

  - by Andrei Rinea

  I am having some troubles lately powering on my desktop workstation. While starting up the PC after being off for hours (usually at least 8 hours) it randomly fails to do so. What happens is that : I press the power button; nothing happens I can hear a moderate buzzing noise at the back of the PC (near the PSU); but I can't say for sure that it's not from the mainboard. If I insist pressing the power button a few times in 1-2 minutes it'll start Another route would be that instead of (3) I will plug off the power cable from the PSU and wait for 30 seconds. Then I will press the power on and keep it for 30-60 seconds (I had some success at notebooks with a similar approach). Then I will plug back the cable in the PSU, press only once the power button and it will start normally. Also while running normally I keep hearing some low buzzing which seems to be fan-RPM-related (i.e. when processing images or doing CPU intensive work). What should I look into? UPDATE It's getting worse. It took more than 10 retries today and almost 20 minutes to start the computer. I tried the paperclip trick and the PSU behaves perfectly. I managed to start the computer like so : I pressed the on-button a few times and then left the PC in a pre-startup state (the fans were working the buzzing noise was strong and I went to eat. I thought I won't lit the house on fire so fast and without smelling. Back, after 10-15 min the computer booted up! Discussed with a fellow at Intel and he told me the capacitors on the mainboard are probably a bit shot. If they are shot, he said, it should start up warm perfectly. So I did restart it, warm, a few times (5 sec cooldown and then 40 sec cooldown and it started up perfectly). I can either replace the capacitors on the mainboard (doesn't sound worth it or replace the mainboard (this one sucks too :)) ) FINAL INFO : It was the PSU after all. Although it was powering the IDEs and SATAs the Mainboard power module was failing. I bought another mainboard just to find out that this wasn't the cause. Now I'll have to return it somehow. The spare PSU is now in the computer and doing well.. Although larger (500W), it's like a plane taking off.. I need a better one.

  Read the article

• FTP Error: 550 Cant change directory to /: Permission denied

  - by Alessandro Merletti de Palo

  I installed Pureftpd and Ispconfig3 on my server. Starting from the point I'll probably uninstall ispconfig3 and make things directly on the server, now I am so stubborn I really want to see where's the problem. I created a ftp user through ispconfig, named amdpftp. It is related to a server user named web7. It logs in with username and password, but if i try to ls, it tells me: FTP Error: 550 Cant change directory to /: Permission denied I thought many things, like: 1. It is a problem of permissions. I went to /var/www/clients/client0/web7 , it was immutable and owned by root. Chattr -i and chown web7:client0 changed permissions, but with no effect. I restored to root:root, and made it immutable again. 2. I make some mistakes in the pureftpd installation: Wrong, it works pretty fine. The pureftpd.log doesn't seem to say anything bad. 3. The pureftpd.log file is only the pureftpd one, I should also check the mysqld functionality, as it is in a mysql database that user, password and working directory are stored. I enabled logging in the my.cnf, but also in the ispconfig database operation there wasn't anything wrong. Then I mkdir testftp in /var/www, chown web7:client0, and edited amdpftp user root directory from /var/www/clients/client0/web7 into /var/www/testftp . Guess what? It worked. So, now I know: 1. The PureFtpd works pretty fine 2. The mysql ispconfig database as well 3. The username and password of the virtual user created by ispconfig into pureftpd work 4. The correlation between username and password and the user web7 and the group client0 does work. What kind of magic has been cast upon the ispconfig directories [/var/www/clients/*] that block ftpusers to operate?

  Read the article

• Install a web certificate on an Android device

  - by martani_net

  To gain access to WIFI at university I have to login with my user/pass credentials. The certificate of their website (the local home page that asks for the credentials) is not recognized as a trusted certificate, so we install it separately on our computers. The problem is that I don't take my laptop with me often to university, so I usually want to connect using my HTC Magic, but I have no clue on how to install the certificate separately on Android, it is always rejected. [Edit2] : this is what is stated in their website Need for installation of official certificates CyberTrust validated by the CRU (http://www.cru.fr/wiki/scs/) The certificates contain information certified to generate encryption keys for data exchange, called "sensitive" as the password of a user. By connecting to CanalIP-UPMC, for example, the user must validate the identity of the server accepting the certificate appears on the screen in a "popup window". In reality, the user is unable to validate a certificate knowing, because a simple visual check of the license is impossible. Therefore, the certificates of the certification authority (CRU-Cybertrust Educationnal-ca.ca Cybertrust and-global-root-ca.ca) must be installed prior to the browser for the validity of the certificate server can be controlled automatically. Before you connect to the network-UPMC CanalIP you must register in your browser through the certification authority Cybertrust-Educationnal-ca.ca Download the Cybertrust-Educationnal-ca.ca, depending on your browser and select the link below : With Internet Explorer, click on the link following. With Firefox, click on the link following. With Safari, click the link following. If this procedure is not respected, a real risk is incurred by the user: that of being robbed password LDAP directory UPMC. A malicious server may in fact try very easily attack type "man-in-the-middle" by posing as the legitimate server at UPMC. The theft of a password allows the attacker to steal an identity for transactions over the Internet can engage the responsibility of the user trapped ... This is their website : http://www.canalip.upmc.fr/doc/Default.htm (in French, Google-translate it :)) Anyone knows how to install a web certificate on Android?

  Read the article

• API numbers don't match on compiled PHP extension

  - by tixrus

  I'm trying to get GD into my PHP. I recently installed PHP5.3.0 on my system running Mac Leopard using mac ports. It did not come with the gd module. So I downloaded gd, compiled it as an extension module as per http://www.kenior.ch/macintosh/adding-gd-library-for-mac-os-x-leopard, made php.ini point to it, restarted apache etc. But no GD. So in apache error log it says PHP Warning: PHP Startup: gd: Unable to initialize module\nModule compiled with module API=20060613\nPHP compiled with module API=20090115\nThese options need to match\n in Unknown on line 0 So a bit of googling says I should not use the phpize I have before configuring and making these. I should use a new one called phpize5. I surely don't have any such thing. Unless its packed up inside something else in my php5.3. distro. Where do you get it. In Ubuntu I could just run sudo apt-get install php-dev, (apparently) and it would just appear by magic. At least that's what the webpage said. Unfortunately I am running MacOSX version Leopard. How can I build this GD module on Leopard so that it will match the API number in my PHP?

  Read the article

• Building the Elusive Windows Phone Panorama Control

  When the Windows Phone 7 Developer SDK was released a couple of weeks ago at MIX10 many people noticed the SDK doesnt include a template for a Panorama control.   Here at Clarity we decided to build our own Panorama control for use in some of our prototypes and I figured I would share what we came up with. There have been a couple of implementations of the Panorama control making their way through the interwebs, but I didnt think any of them really nailed the experience that is shown in the simulation videos.   One of the key design principals in the UX Guide for Windows Phone 7 is the use of motion.  The WP7 OS is fairly stripped of extraneous design elements and makes heavy use of typography and motion to give users the necessary visual cues.  Subtle animations and wide layouts help give the user a sense of fluidity and consistency across the phone experience.  When building the panorama control I was fairly meticulous in recreating the motion as shown in the videos.  The effect that is shown in the application hubs of the phone is known as a Parallax Scrolling effect.  This this pseudo-3D technique has been around in the computer graphics world for quite some time. In essence, the background images move slower than foreground images, creating an illusion of depth in 2D.  Here is an example of the traditional use: http://www.mauriciostudio.com/.  One of the animation gems I've learned while building interactive software is the follow animation.  The premise is straightforward: instead of translating content 1:1 with the interaction point, let the content catch up to the mouse or finger.  The difference is subtle, but the impact on the smoothness of the interaction is huge.  That said, it became the foundation of how I achieved the effect shown below.   Source Code Available HERE Before I briefly describe the approach I took in creating this control..and Ill add some **asterisks ** to the code below as my coding skills arent up to snuff with the rest of my colleagues.  This code is meant to be an interpretation of the WP7 panorama control and is not intended to be used in a production application.  1.  Layout the XAML The UI consists of three main components :  The background image, the Title, and the Content.  You can imagine each  these UI Elements existing on their own plane with a corresponding Translate Transform to create the Parallax effect.  2.  Storyboards + Procedural Animations = Sexy As I mentioned above, creating a fluid experience was at the top of my priorities while building this control.  To recreate the smooth scroll effect shown in the video we need to add some place holder storyboards that we can manipulate in code to simulate the inertia and snapping.  Using the easing functions built into Silverlight helps create a very pleasant interaction.    3.  Handle the Manipulation Events With Silverlight 3 we have some new touch event handlers.  The new Manipulation events makes handling the interactivity pretty straight forward.  There are two event handlers that need to be hooked up to enable the dragging and motion effects: the ManipulationDelta event :  (the most relevant code is highlighted in pink) Here we are doing some simple math with the Manipulation Deltas and setting the TO values of the animations appropriately. Modifying the storyboards dynamically in code helps to create a natural feel.something that cant easily be done with storyboards alone.   And secondly, the ManipulationCompleted event:  Here we take the Final Velocities from the Manipulation Completed Event and apply them to the Storyboards to create the snapping and scrolling effects.  Most of this code is determining what the next position of the viewport will be.  The interesting part (shown in pink) is determining the duration of the animation based on the calculated velocity of the flick gesture.  By using velocity as a variable in determining the duration of the animation we can produce a slow animation for a soft flick and a fast animation for a strong flick. Challenges to the Reader There are a couple of things I didnt have time to implement into this control.  And I would love to see other WPF/Silverlight approaches.  1.  A good mechanism for deciphering when the user is manipulating the content within the panorama control and the panorama itself.   In other words, being able to accurately determine what is a flick and what is click. 2.  Dynamically Sizing the panorama control based on the width of its content.  Right now each control panel is 400px, ideally the Panel items would be measured and then panorama control would update its size accordingly.  3.  Background and content wrapping.  The WP7 UX guidelines specify that the content and background should wrap at the end of the list.  In my code I restrict the drag at the ends of the list (like the iPhone).  It would be interesting to see how this would effect the scroll experience.     Well, Its been fun building this control and if you use it Id love to know what you think.  You can download the Source HERE or from the Expression Gallery  Erik Klimczak  | [email protected] | twitter.com/eklimczDid you know that DotNetSlackers also publishes .net articles written by top known .net Authors? We already have over 80 articles in several categories including Silverlight. Take a look: here.

  Read the article

• Protecting offline IRM rights and the error "Unable to Connect to Offline database"

  - by Simon Thorpe

  One of the most common problems I get asked about Oracle IRM is in relation to the error message "Unable to Connect to Offline database". This error message is a result of how Oracle IRM is protecting the cached rights on the local machine and if that cache has become invalid in anyway, this error is thrown. Offline rights and security First we need to understand how Oracle IRM handles offline use. The way it is implemented is one of the main reasons why Oracle IRM is the leading document security solution and demonstrates our methodology to ensure that solutions address both security and usability and puts the balance of these two in your control. Each classification has a set of predefined roles that the manager of the classification can assign to users. Each role has an offline period which determines the amount of time a user can access content without having to communicate with the IRM server. By default for the context model, which is the classification system that ships out of the box with Oracle IRM, the offline period for each role is 3 days. This is easily changed however and can be as low as under an hour to as long as years. It is also possible to switch off the ability to access content offline which can be useful when content is very sensitive and requires a tight leash. So when a user is online, transparently in the background, the Oracle IRM Desktop communicates with the server and updates the users rights and offline periods. This transparent synchronization period is determined by the server and communicated to all IRM Desktops and allows for users rights to be kept up to date without their intervention. This allows us to support some very important scenarios which are key to a successful IRM solution. A user doesn't have to make any decision when going offline, they simply unplug their laptop and they already have their offline periods synchronized to the maximum values. Any solution that requires a user to make a decision at the point of going offline isn't going to work because people forget to do this and will therefore be unable to legitimately access their content offline. If your rights change to REMOVE your access to content, this also happens in the background. This is very useful when someone has an offline duration of a week and they happen to make a connection to the internet 3 days into that offline period, the Oracle IRM Desktop detects this online state and automatically updates all rights for the user. This means the business risk is reduced when setting long offline periods, because of the daily transparent sync, you can reflect changes as soon as the user is online. Of course, if they choose not to come online at all during that week offline period, you cannot effect change, but you take that risk in giving the 7 day offline period in the first place. If you are added to a NEW classification during the day, this will automatically be synchronized without the user even having to open a piece of content secured against that classification. This is very important, consider the scenario where a senior executive downloads all their email but doesn't open any of it. Disconnects the laptop and then gets on a plane. During the flight they attempt to open a document attached to a downloaded email which has been secured against an IRM classification the user was not even aware they had access to. Because their new role in this classification was automatically synchronized their experience is a good one and the document opens. More information on how the Oracle IRM classification model works can be found in this article by Martin Abrahams. So what about problems accessing the offline rights database? So onto the core issue... when these rights are cached to your machine they are stored in an encrypted database. The encryption of this offline database is keyed to the instance of the installation of the IRM Desktop and the Windows user account. Why? Well what you do not want to happen is for someone to get their rights for content and then copy these files across hundreds of other machines, therefore getting access to sensitive content across many environments. The IRM server has a setting which controls how many times you can cache these rights on unique machines. This is because people typically access IRM content on more than one computer. Their work desktop, a laptop and often a home computer. So Oracle IRM allows for the usability of caching rights on more than one computer whilst retaining strong security over this cache. So what happens if these files are corrupted in someway? That's when you will see the error, Unable to Connect to Offline database. The most common instance of seeing this is when you are using virtual machines and copy them from one computer to the next. The virtual machine software, VMWare Workstation for example, makes changes to the unique information of that virtual machine and as such invalidates the offline database. How do you solve the problem? Resolution is however simple. You just delete all of the offline database files on the machine and they will be recreated with working encryption when the Oracle IRM Desktop next starts. However this does mean that the IRM server will think you have your rights cached to more than one computer and you will need to rerequest your rights, even though you are only going to be accessing them on one. Because it still thinks the old cache is valid. So be aware, it is good practice to increase the server limit from the default of 1 to say 3 or 4. This is done using the Enterprise Manager instance of IRM. So to delete these offline files I have a simple .bat file you can use; Download DeleteOfflineDBs.bat Note that this uses pskillto stop the irmBackground.exe from running. This is part of the IRM Desktop and holds open a lock to the offline database. Either kill this from task manager or use pskillas part of the script.

  Read the article

• Ext3 fs: Block bitmap for group 1 not in group (block 0). is fs dead?

  - by ip

  Hi, My company has a server with one big partition with Mysql database and php files. Now this partition seems to be corrupted, as reported from kernel messages when I tried to mount it manually: [329862.817837] EXT3-fs error (device loop1): ext3_check_descriptors: Block bitmap for group 1 not in group (block 0)! [329862.817846] EXT3-fs: group descriptors corrupted! I've tried to recovery it running tools from a PLD livecd. These are the tools I have tested: - e2retrieve - testdisk - photorec - dd_rescue/dd_rhelp - ddrescue - fsck.ext2 - e2salvage without any success. dumpe2fs 1.41.3 (12-Oct-2008) Filesystem volume name: /dev/sda3 Last mounted on: <not available> Filesystem UUID: dd51610b-6de0-4392-a6f3-67160dbc0343 Filesystem magic number: 0xEF53 Filesystem revision #: 1 (dynamic) Filesystem features: has_journal filetype sparse_super Default mount options: (none) Filesystem state: not clean with errors Errors behavior: Continue Filesystem OS type: Linux Inode count: 9502720 Block count: 18987570 Reserved block count: 949378 Free blocks: 11555345 Free inodes: 11858398 First block: 0 Block size: 4096 Fragment size: 4096 Blocks per group: 32768 Fragments per group: 32768 Inodes per group: 16384 Inode blocks per group: 512 Last mount time: Wed Mar 24 09:31:03 2010 Last write time: Mon Apr 12 11:46:32 2010 Mount count: 10 Maximum mount count: 30 Last checked: Thu Jan 1 01:00:00 1970 Check interval: 0 (<none>) Reserved blocks uid: 0 (user root) Reserved blocks gid: 0 (group root) First inode: 11 Inode size: 128 Journal inode: 8 Journal backup: inode blocks dumpe2fs: A block group is missing an inode table while reading journal inode There's any other tools I have to test before considering these disk definitely unrecoverable? Many thanks, ip

  Read the article

• kickstart: reference floppy drive via %ksappend or %include

  - by virtualeyes

  Having trouble getting %ksappend or %include to work when referencing a local floppy drive. Booting off remote server's cd-rom drive I am able to load the CentOS 6 minimal install image, and then add ks=hd:fd0/ks-jvm.cfg to boot params to load kickstart init file from floppy disk. That works fine. The problem is that I want to load a streamlined generic init file off the floppy and then, within the init, %ksappend or %include specific config files relative to the type of server I'm building (JVM, MySQL, Apache, etc.) I do not have DHCP, networking needs to be specified statically, so %ksappend and %include both fail when attempting to reference http://some-LAN-IP/foo.cfg since networking has not yet been set. The kickstart setup only works when I glob in the entire config into a single file, which is great, but ugly and difficult to maintain when I return later, having forgotten the original setup. At this point I'd be happy if I could get %ksappend or %include working with a floppy drive reference in the %post section; that would consolidate a lot of common boilerplate that all kickstarts will rely on (sshd_config, rsync config, resolve.conf, and so on) Thanks for providing the magic floppy drive reference that is eluding me!

  Read the article

• solr php extension fails to run on newest Debian Wheezy

  - by hijarian

  I'm trying to use the Solr PHP extension on the recently-upgraded Debian Wheezy. It installs both from PECL and from sources flawlessly but instead of giving me expected functionality it gives me this on every PHP run: PHP Warning: PHP Startup: Unable to load dynamic library '/usr/lib/php5/20100525/solr.so' - /usr/lib/php5/20100525/solr.so: undefined symbol: curl_easy_getinfo in Unknown on line 0 Also scripts which use the extension throws an error PHP Error[2]: include(SolrClient.php): failed to open stream: No such file or directory in file <...path to my autoloader...> My main point is that it was set up before and worked like a charm. In the upgrade among the relevant packages only the versions of PHP and libcurl was changed. Instance of Solr itself was left as is. I have all possible libcurl libraries: $ locate libcurl ... /usr/lib/x86_64-linux-gnu/libcurl-gnutls.so.3 /usr/lib/x86_64-linux-gnu/libcurl-gnutls.so.4 /usr/lib/x86_64-linux-gnu/libcurl-gnutls.so.4.2.0 /usr/lib/x86_64-linux-gnu/libcurl.a /usr/lib/x86_64-linux-gnu/libcurl.la /usr/lib/x86_64-linux-gnu/libcurl.so /usr/lib/x86_64-linux-gnu/libcurl.so.3 /usr/lib/x86_64-linux-gnu/libcurl.so.4 /usr/lib/x86_64-linux-gnu/libcurl.so.4.2.0 ... /usr/lib32/libcurl.so.3 /usr/lib32/libcurl.so.4 /usr/lib32/libcurl.so.4.2.0 ... I have instaled the php5-curl package version 5.4.4-2 with aptitude. I installed the Sorl extensions both with sudo pecl install solr (with various combinations of -f and -n flags and tried solr-beta too) and with wget ... cd ... phpize ./configure make make install I'm installing the 1.0.2 version of extension because it worked before the upgrade from Squeeze to Wheezy. As I said earlier, extension installs without any errors. I have already added the extension=solr.so incantation to the /etc/php5/mods-available/solr.ini What magic should I do to make solr extension work? Is this true that the only solution that I have is to downgrade the libcurl version as it was before the upgrade?

  Read the article

• unreadable corrupted ntfs partition - lost clusters reported

  - by Eduardo Martinez

  partition magic is reporting multiple 'bad file record signature' and 'lost clusters' errors on my 250GB samsung sata disk (connected via usb on a xp sp3). Unfortunately PM is unable to fix. PM shows the drive as being NTFS, detects used space ok and also drive name. But PM browser (right click on partition, browse...) won't show anything (as if disk was empty) Windows Explorer is not even picking the drive name and reports 'the file or directory is corrupted and unreadable' PTDD partition table doctor demo tells me the boot sector is fine, and I can see all disk content on its browser - but crucially cannot copy that content over to a new disk (PTDD browser is pretty arid to say the least) Also tried - photorec-6.11.3 - it actually started to extract files but wouldn't keep file names or any folder structure (maybe I missed sth on the configuration options) - find and mount - intellectual scan went well, the only partition on the disk was detected, then tried to mount into p: but got this error on windows explorer: 'p:\ is not accesible. The media is write protected'. Find and mount allows you to create an image from partition but I don't have a disk big enough at hand. Does anyone know if this will keep the extracted files/folders structure intact? I'm starting to think the disk is pretty screwed and my chances to recover this data are slim. Please someone enlighten me with that marvellous piece of software I am missing :-) Thanks in advance

  Read the article

• Building the Elusive Windows Phone Panorama Control

  When the Windows Phone 7 Developer SDK was released a couple of weeks ago at MIX10 many people noticed the SDK doesnt include a template for a Panorama control.   Here at Clarity we decided to build our own Panorama control for use in some of our prototypes and I figured I would share what we came up with. There have been a couple of implementations of the Panorama control making their way through the interwebs, but I didnt think any of them really nailed the experience that is shown in the simulation videos.   One of the key design principals in the UX Guide for Windows Phone 7 is the use of motion.  The WP7 OS is fairly stripped of extraneous design elements and makes heavy use of typography and motion to give users the necessary visual cues.  Subtle animations and wide layouts help give the user a sense of fluidity and consistency across the phone experience.  When building the panorama control I was fairly meticulous in recreating the motion as shown in the videos.  The effect that is shown in the application hubs of the phone is known as a Parallax Scrolling effect.  This this pseudo-3D technique has been around in the computer graphics world for quite some time. In essence, the background images move slower than foreground images, creating an illusion of depth in 2D.  Here is an example of the traditional use: http://www.mauriciostudio.com/.  One of the animation gems I've learned while building interactive software is the follow animation.  The premise is straightforward: instead of translating content 1:1 with the interaction point, let the content catch up to the mouse or finger.  The difference is subtle, but the impact on the smoothness of the interaction is huge.  That said, it became the foundation of how I achieved the effect shown below.   Source Code Available HERE Before I briefly describe the approach I took in creating this control..and Ill add some **asterisks ** to the code below as my coding skills arent up to snuff with the rest of my colleagues.  This code is meant to be an interpretation of the WP7 panorama control and is not intended to be used in a production application.  1.  Layout the XAML The UI consists of three main components :  The background image, the Title, and the Content.  You can imagine each  these UI Elements existing on their own plane with a corresponding Translate Transform to create the Parallax effect.  2.  Storyboards + Procedural Animations = Sexy As I mentioned above, creating a fluid experience was at the top of my priorities while building this control.  To recreate the smooth scroll effect shown in the video we need to add some place holder storyboards that we can manipulate in code to simulate the inertia and snapping.  Using the easing functions built into Silverlight helps create a very pleasant interaction.    3.  Handle the Manipulation Events With Silverlight 3 we have some new touch event handlers.  The new Manipulation events makes handling the interactivity pretty straight forward.  There are two event handlers that need to be hooked up to enable the dragging and motion effects: the ManipulationDelta event :  (the most relevant code is highlighted in pink) Here we are doing some simple math with the Manipulation Deltas and setting the TO values of the animations appropriately. Modifying the storyboards dynamically in code helps to create a natural feel.something that cant easily be done with storyboards alone.   And secondly, the ManipulationCompleted event:  Here we take the Final Velocities from the Manipulation Completed Event and apply them to the Storyboards to create the snapping and scrolling effects.  Most of this code is determining what the next position of the viewport will be.  The interesting part (shown in pink) is determining the duration of the animation based on the calculated velocity of the flick gesture.  By using velocity as a variable in determining the duration of the animation we can produce a slow animation for a soft flick and a fast animation for a strong flick. Challenges to the Reader There are a couple of things I didnt have time to implement into this control.  And I would love to see other WPF/Silverlight approaches.  1.  A good mechanism for deciphering when the user is manipulating the content within the panorama control and the panorama itself.   In other words, being able to accurately determine what is a flick and what is click. 2.  Dynamically Sizing the panorama control based on the width of its content.  Right now each control panel is 400px, ideally the Panel items would be measured and then panorama control would update its size accordingly.  3.  Background and content wrapping.  The WP7 UX guidelines specify that the content and background should wrap at the end of the list.  In my code I restrict the drag at the ends of the list (like the iPhone).  It would be interesting to see how this would effect the scroll experience.     Well, Its been fun building this control and if you use it Id love to know what you think.  You can download the Source HERE or from the Expression Gallery  Erik Klimczak  | [email protected] | twitter.com/eklimczDid you know that DotNetSlackers also publishes .net articles written by top known .net Authors? We already have over 80 articles in several categories including Silverlight. Take a look: here.

  Read the article

• mdadm superblock hiding/shadowing partition

  - by Kjell Andreassen

  Short version: Is it safe to do mdadm --zero-superblock /dev/sdd on a disk with a partition (dev/sdd1), filesystem and data? Will the partition be mountable and the data still there? Longer version: I used to have a raid6 array but decided to dismantle it. The disks from the array are now used as non-raid disks. The superblocks were cleared: sudo mdadm --zero-superblock /dev/sdd The disks were repartitioned with fdisk and filesystems created with mfks.ext4. All disks where mounted and everything worked fine. Today, a couple of weeks later, one of the disks is failing to be recognized when trying to mount it, or rather the single partition on it. sudo mount /dev/sdd1 /mnt/tmp mount: special device /dev/sdd1 does not exist fdisk claims there to be a partition on it: sudo fdisk -l /dev/sdd Disk /dev/sdd: 2000.4 GB, 2000398934016 bytes 255 heads, 63 sectors/track, 243201 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0xb06f6341 Device Boot Start End Blocks Id System /dev/sdd1 1 243201 1953512001 83 Linux Of course mount is right, the device /dev/sdd1 is not there, I'm guessing udev did not create it because of the mdadm data still on it: sudo mdadm --examine /dev/sdd /dev/sdd: Magic : a92b4efc Version : 1.2 Feature Map : 0x0 Array UUID : b164e513:c0584be1:3cc53326:48691084 Name : pringle:0 (local to host pringle) Creation Time : Sat Jun 16 21:37:14 2012 Raid Level : raid6 Raid Devices : 6 Avail Dev Size : 3907027120 (1863.02 GiB 2000.40 GB) Array Size : 15628107776 (7452.06 GiB 8001.59 GB) Used Dev Size : 3907026944 (1863.02 GiB 2000.40 GB) Data Offset : 2048 sectors Super Offset : 8 sectors State : clean Device UUID : 3ccaeb5b:843531e4:87bf1224:382c16e2 Update Time : Sun Aug 12 22:20:39 2012 Checksum : 4c329db0 - correct Events : 1238535 Layout : left-symmetric Chunk Size : 512K Device Role : Active device 3 Array State : AA.AAA ('A' == active, '.' == missing) My mdadm --zero-superblock apparently didn't work. Can I safely try it again without losing data? If not, are there any suggestion on what do to? Not starting mdadm at all on boot might be a (somewhat unsatisfactory) solution.

  Read the article

• Resizing a LUKS encrypted volume

  - by mgorven

  I have a 500GiB ext4 filesystem on top of LUKS on top of an LVM LV. I want to resize the LV to 100GiB. I know how to resize ext4 on top of an LVM LV, but how do I deal with the LUKS volume? mgorven@moab:~% sudo lvdisplay /dev/moab/backup --- Logical volume --- LV Name /dev/moab/backup VG Name moab LV UUID nQ3z1J-Pemd-uTEB-fazN-yEux-nOxP-QQair5 LV Write Access read/write LV Status available # open 1 LV Size 500.00 GiB Current LE 128000 Segments 1 Allocation inherit Read ahead sectors auto - currently set to 2048 Block device 252:3 mgorven@moab:~% sudo cryptsetup status backup /dev/mapper/backup is active and is in use. type: LUKS1 cipher: aes-cbc-essiv:sha256 keysize: 256 bits device: /dev/mapper/moab-backup offset: 3072 sectors size: 1048572928 sectors mode: read/write mgorven@moab:~% sudo tune2fs -l /dev/mapper/backup tune2fs 1.42 (29-Nov-2011) Filesystem volume name: backup Last mounted on: /srv/backup Filesystem UUID: 63877e0e-0549-4c73-8535-b7a81eb363ed Filesystem magic number: 0xEF53 Filesystem revision #: 1 (dynamic) Filesystem features: has_journal ext_attr resize_inode dir_index filetype extent flex_bg sparse_super large_file huge_file uninit_bg dir_nlink extra_isize Filesystem flags: signed_directory_hash Default mount options: (none) Filesystem state: clean with errors Errors behavior: Continue Filesystem OS type: Linux Inode count: 32768000 Block count: 131071616 Reserved block count: 0 Free blocks: 112894078 Free inodes: 32044830 First block: 0 Block size: 4096 Fragment size: 4096 Reserved GDT blocks: 992 Blocks per group: 32768 Fragments per group: 32768 Inodes per group: 8192 Inode blocks per group: 512 RAID stride: 128 RAID stripe width: 128 Flex block group size: 16 Filesystem created: Sun Mar 11 19:24:53 2012 Last mount time: Sat May 19 13:29:27 2012 Last write time: Fri Jun 1 11:07:22 2012 Mount count: 0 Maximum mount count: 100 Last checked: Fri Jun 1 11:03:50 2012 Check interval: 31104000 (12 months) Next check after: Mon May 27 11:03:50 2013 Lifetime writes: 118 GB Reserved blocks uid: 0 (user root) Reserved blocks gid: 0 (group root) First inode: 11 Inode size: 256 Required extra isize: 28 Desired extra isize: 28 Journal inode: 8 Default directory hash: half_md4 Directory Hash Seed: 383bcbc5-fde9-4720-b98e-2d6224713ecf Journal backup: inode blocks

  Read the article

• Linux error when resume from RAM

  - by TuxPotato

  The last two times that I have resumed my laptop from sleep, it has hung and given me this set of errors: [drm:atom_op_jump] *ERROR* atombios stuck in loop for more than 1sec aborting [drm:atom_execute_table_locked] *ERROR* atombios stuck executing E692 (len 460, WS 0, PS 4) @0xE6D3 hda_intel: azx_get_responce timeout, switching to single_cmd mode: last cmd=0x01170700 ata6: softreset failed (device not ready) ata4: softreset failed (device not ready) [drm:atom_op_jump] *ERROR* atombios stuck in loop for more than 1sec aborting [drm:atom_execute_table_locked] *ERROR* atombios stuck executing E692 (len 460, WS 0, PS 4) @0xE6D3 The last two messages repeat two more times. The first time this happened, Linux's Magic SysRq worked and did a soft reboot, and after that everything was fine till it went to sleep again. It wakes up and gives me this. Here are the laptop stats: Toshiba Satellite L455D-S5976 AMD Sempron SI-42 Processor 2GB DDR2 RAM HD TruBrite Display ATI Radeon Graphics (integrated) Running Ubuntu 10.10 32 bit I'm not sure about the hard drive, but its a 250GB drive with one NTFS partition, two Hidden NTFS, one Linux Swap, and one Ext4. Can someone tell me whats wrong with my laptop? NOTE: This only happens when I close the screen. My computer doesn't go to sleep with the screen open.

  Read the article

• Apache 2.2, worker mpm, mod_fcgid and PHP: Can't apply process slot

  - by mopoke

  We're having an issue on an apache server where every 15 to 20 minutes it stops serving PHP requests entirely. On occasions it will return a 503 error, other times it will recover enough to serve the page but only after a delay of a minute or more. Static content is still served during that time. In the log file, there's errors reported along the lines of: [Wed Sep 28 10:45:39 2011] [warn] mod_fcgid: can't apply process slot for /xxx/ajaxfolder/ajax_features.php [Wed Sep 28 10:45:41 2011] [warn] mod_fcgid: can't apply process slot for /xxx/statics/poll/index.php [Wed Sep 28 10:45:45 2011] [warn] mod_fcgid: can't apply process slot for /xxx/index.php [Wed Sep 28 10:45:45 2011] [warn] mod_fcgid: can't apply process slot for /xxx/index.php There is RAM free and, indeed, it seems that more php processes get spawned. /server-status shows lots of threads in the "W" state as well as some FastCGI processes in "Exiting(communication error)" state. I rebuilt mod_fcgid from source as the packaged version was quite old. It's using current stable version (2.3.6) of mod_fcgid. FCGI config: FcgidBusyScanInterval 30 FcgidBusyTimeout 60 FcgidIdleScanInterval 30 FcgidIdleTimeout 45 FcgidIOTimeout 60 FcgidConnectTimeout 20 FcgidMaxProcesses 100 FcgidMaxRequestsPerProcess 500 FcgidOutputBufferSize 1048576 System info: Linux xxx.com 2.6.28-11-server #42-Ubuntu SMP Fri Apr 17 02:45:36 UTC 2009 x86_64 GNU/Linux DISTRIB_ID=Ubuntu DISTRIB_RELEASE=9.04 DISTRIB_CODENAME=jaunty DISTRIB_DESCRIPTION="Ubuntu 9.04" Apache info: Server version: Apache/2.2.11 (Ubuntu) Server built: Aug 16 2010 17:45:55 Server's Module Magic Number: 20051115:21 Server loaded: APR 1.2.12, APR-Util 1.2.12 Compiled using: APR 1.2.12, APR-Util 1.2.12 Architecture: 64-bit Server MPM: Worker threaded: yes (fixed thread count) forked: yes (variable process count) Server compiled with.... -D APACHE_MPM_DIR="server/mpm/worker" -D APR_HAS_SENDFILE -D APR_HAS_MMAP -D APR_HAVE_IPV6 (IPv4-mapped addresses enabled) -D APR_USE_SYSVSEM_SERIALIZE -D APR_USE_PTHREAD_SERIALIZE -D SINGLE_LISTEN_UNSERIALIZED_ACCEPT -D APR_HAS_OTHER_CHILD -D AP_HAVE_RELIABLE_PIPED_LOGS -D DYNAMIC_MODULE_LIMIT=128 -D HTTPD_ROOT="" -D SUEXEC_BIN="/usr/lib/apache2/suexec" -D DEFAULT_PIDLOG="/var/run/apache2.pid" -D DEFAULT_SCOREBOARD="logs/apache_runtime_status" -D DEFAULT_ERRORLOG="logs/error_log" -D AP_TYPES_CONFIG_FILE="/etc/apache2/mime.types" -D SERVER_CONFIG_FILE="/etc/apache2/apache2.conf" Apache modules loaded: alias.load auth_basic.load authn_file.load authz_default.load authz_groupfile.load authz_host.load authz_user.load autoindex.load cgi.load deflate.load dir.load env.load expires.load fcgid.load headers.load include.load mime.load negotiation.load rewrite.load setenvif.load ssl.load status.load suexec.load PHP info: PHP 5.2.6-3ubuntu4.6 with Suhosin-Patch 0.9.6.2 (cli) (built: Sep 16 2010 19:51:25) Copyright (c) 1997-2008 The PHP Group Zend Engine v2.2.0, Copyright (c) 1998-2008 Zend Technologies

  Read the article

< Previous Page | 57 58 59 60 61 62 63 64 65 66 67 68  | Next Page >