Search Results

Search found 7875 results on 315 pages for 'wired networking'.

Page 61/315 | < Previous Page | 57 58 59 60 61 62 63 64 65 66 67 68  | Next Page >

  • Upgraded from 11.10 to 12.04 now no network access

    - by MadeTheLeap
    A few weeks ago I decided I should enter the Linux world and read that Ubuntu is the most widely used release. I installed version 11.10 and it worked perfectly. Just this past week I decided I would do the upgrade to 12.04. The upgrade process itself worked fine. However, when I logged in I no longer had a network connection. I am running an AMD-based PC with a D-LINK DFE-530TXS network card and as I said, it worked fine in 11.10. I have scoured the Internet and come across a thousand slightly varying solutions, but they are too convoluted for someone new to Linux. Not because I can't follow the steps, but because most of the tools/utilities that are referenced (e.g. to compile, install, etc.) are not available when I use the stated steps in the solutions. So....should I re-install 11.10 or is there hope in getting this version to use the NIC that I know works. I have the latest driver from d-link for my NIC but I have no idea how to 'install' it for Ubuntu 12.04 to use. I know you will require additional information, but I wasn't sure what you would need. Thanks in advance.

    Read the article

  • android client not working [migrated]

    - by Syeda Zunairah
    i have a java client and c# server the server code is static Socket listeningSocket; static Socket socket; static Thread thrReadRequest; static int iPort = 4444; static int iConnectionQueue = 100; static void Main(string[] args) { Console.WriteLine(IPAddress.Parse(getLocalIPAddress()).ToString()); try { listeningSocket = new Socket(AddressFamily.InterNetwork, SocketType.Stream, ProtocolType.Tcp); //listeningSocket.Bind(new IPEndPoint(0, iPort)); listeningSocket.Bind(new IPEndPoint(IPAddress.Parse(getLocalIPAddress()), iPort)); listeningSocket.Listen(iConnectionQueue); thrReadRequest = new Thread(new ThreadStart(getRequest)); thrReadRequest.Start(); } catch (Exception e) { Console.WriteLine("Winsock error: " + e.ToString()); //throw; } } static private void getRequest() { int i = 0; while (true) { i++; Console.WriteLine("Outside Try i = {0}", i.ToString()); try { socket = listeningSocket.Accept(); // Receiving //byte[] rcvLenBytes = new byte[4]; //socket.Receive(rcvLenBytes); //int rcvLen = System.BitConverter.ToInt32(rcvLenBytes, 0); //byte[] rcvBytes = new byte[rcvLen]; //socket.Receive(rcvBytes); //String formattedBuffer = System.Text.Encoding.ASCII.GetString(rcvBytes); byte[] buffer = new byte[socket.SendBufferSize]; int iBufferLength = socket.Receive(buffer, 0, buffer.Length, 0); Console.WriteLine("Received {0}", iBufferLength); Array.Resize(ref buffer, iBufferLength); string formattedBuffer = Encoding.ASCII.GetString(buffer); Console.WriteLine("Data received by Client: {0}", formattedBuffer); if (formattedBuffer == "quit") { socket.Close(); listeningSocket.Close(); Environment.Exit(0); } Console.WriteLine("Inside Try i = {0}", i.ToString()); Thread.Sleep(500); } catch (Exception e) { //socket.Close(); Console.WriteLine("Receiving error: " + e.ToString()); Console.ReadKey(); //throw; } finally { socket.Close(); //listeningsocket.close(); } } } static private string getLocalIPAddress() { IPHostEntry host; string localIP = ""; host = Dns.GetHostEntry(Dns.GetHostName()); foreach (IPAddress ip in host.AddressList) { if (ip.AddressFamily == AddressFamily.InterNetwork) { localIP = ip.ToString(); break; } } return localIP; } } and the jave android code is private TCPClient mTcpClient; @Override protected void onCreate(Bundle savedInstanceState) { super.onCreate(savedInstanceState); setContentView(R.layout.activity_main); final EditText editText = (EditText) findViewById(R.id.edit_message); Button send = (Button)findViewById(R.id.sendbutton); // connect to the server new connectTask().execute(""); send.setOnClickListener(new View.OnClickListener() { @Override public void onClick(View view) { String message = editText.getText().toString(); //sends the message to the server if (mTcpClient != null) { mTcpClient.sendMessage(message); } editText.setText(""); } }); } @Override public boolean onCreateOptionsMenu(Menu menu) { getMenuInflater().inflate(R.menu.main, menu); return true; } public class connectTask extends AsyncTask<String,String,TCPClient> { @Override protected TCPClient doInBackground(String... message) { mTcpClient = new TCPClient(new TCPClient.OnMessageReceived() { @Override public void messageReceived(String message) { publishProgress(message); } }); mTcpClient.run(); return null; } @Override protected void onProgressUpdate(String... values) { super.onProgressUpdate(values); } } } when i run the server it gives output of try i=1. can any one tell me what to do next

    Read the article

  • Is this a b43 driver problem?

    - by Nullet
    I have 13.04 on a Dell Inspiron 1564 with Broadcom 4312 WiFi card. The wl drivers cause kernel panic on linux-3.8 so I succesfully installed the b43 driver a couple of months ago. Now I have changed ISP and got a new router, and the connection drop when downloading software from internet to a 2008r2 using Remmina Client, and apt-get install on virtual machines in virtualbox. I have no idea why this suddenly became a problem.. My phone does not loose the connection, just Ubuntu. Output from /var/log/syslog after lost connection rfkill list(after disconnecting): 0: phy0: Wireless LAN Soft blocked: yes Hard blocked: yes I can use NetworkManager to disable wireless and then enable wireless to connect again. rfkill ublock all/wifi/0 removes only Soft blocked. lshw -C network *-network description: Wireless interface physical id: 4 logical name: wlan0 serial: 78:e4:00:78:d2:05 capabilities: ethernet physical wireless configuration: broadcast=yes driver=b43 driverversion=3.8.0-32-generic firmware=478.104 ip=10.0.0.3 link=yes multicast=yes wireless=IEEE lspci 04:00.0 Network controller: Broadcom Corporation BCM4312 802.11b/g LP-PHY (rev 01) After waking from suspend and when booting, it takes about 40 sec to get network connection. This has been a problem all along AND a different question, but I mention it anyway.. cus it's annoying! Please take a look and hopefully someone spot a problem! Thanks!

    Read the article

  • eth0 missing after upgrading from Hoary to Dapper

    - by Twisol
    I'm trying to upgrade a fairly old server that's been running Hoary for the last five years. I followed the directions on the wiki, but when I restarted after upgrading to Dapper, eth0 disappeared from ifconfig -a. I can see two ethernet adapters in lspci and lshw, and if I put in an Ubuntu 10.10 LiveCD it registers eth0 and eth1 perfectly well. Their MAC addresses also match what's in /etc/iftab. It was working fine before the upgrade, and I have no idea what else I should be trying at this point. The server is entirely cut off from the network right now. EDIT: /etc/udev/rules.d/70-persistent-net.rules doesn't exist, either.

    Read the article

  • no more network connection Ubuntu 12.04 Server

    - by gerpol
    Since yesterday my 12.04 web server refuses to connect to the Internet. Also when I boot I'm seeing the "waiting for network config" message. After logging in I'm getting an error about the packages. Error text: E:Encountered a section with no Package: header, E:Problem with MergeList /var/lib/apt/lists/archive.ubuntu.com_ubuntu_dists_precise-updates_universe_i18n_Translation-en, E:The package lists or status file could not be parsed or opened. This is a production web server so I really could use some help with enabling the network connection again.

    Read the article

  • Pinging/connecting to server.domain.local never works, but server does when the search domain is specified

    - by SuperMatt
    This is a bit of a weird one. I'm running ubuntu on a Windows domain. If I type "ping server" I can ping correctly and I can connect without any problems. It looks up my search domain (domain.local) and everything is hunky dory. Problem is when I try to ping server.domain.local. It just can't look up the server and comes back with "ping: unknown host server.domain.local" Part of me thinks that the name servers aren't set correctly, but I wonder if there is something I can do to get around it.

    Read the article

  • Connecting 2 PCs using USB-to-USB (male-male) cable

    - by Amirizzuan
    I found this while Googling around: http://www.hardwaresecrets.com/article/Connecting-Two-PCs-Using-a-USB-USB-Cable/248 But then, the solution given in the article is using Windows. Is there any Ubuntu equivalent to this? I would really love to SSH into my Ubuntu server via my Ubuntu laptop, just by connecting one end of the male USB to my laptop, and another end of the male USB to my server. I know I can always SSH into my server via the network, but then in this case of mine, there are cases the server is inside a secluded-secured network server room, and the only way for me to check things out is to go into the server room and open the keyboard console and monitor there. But, if I can just bring my laptop inside and connect to the USB there, then that would be cool. Any idea guys?

    Read the article

  • Since my upgrade to 12.10 I don't have an Internetconection, but a networkconnection. Why? [closed]

    - by Klemens
    Possible Duplicate: There's an issue with an Alpha/Beta Release of Ubuntu, what should I do? Because of a few problems i had with ubuntu, I hoped that they would solve themselve by upgrading my system to v12.10. Now they are solved, jeeehaaa, but now I have a new problem. My Network-manager tells me, that I'm connected, but I don't have an Internetconnection. And now I don't know what to do. Help please. By the way, I'm online with my netbook.

    Read the article

  • Internet connectivity issues

    - by Fishies
    I'm on 12.04, I upgraded a month ago from Windows 7 on my Sony VAIO. Everything is great except after the upgrade, I encountered Internet connectivity issues. When browsing the web or loading videos, my Internet will stop working in the middle and come back after a period of 30 seconds to 2 minutes or sometimes it just won't and I'll have to disconnect and re-connect to the network. I've noticed the issue when sending e-mails as well, they just won't send at all. It says sending request and the circle keeps spinning slowly until I get to a page where it says the page wouldn't load and gives me the reason DNS error. I tried setting OpenDNS as my DNS provider but that didn't help.

    Read the article

  • Routing Internet traffic over specific network interfaces [on hold]

    - by dipamchang
    I want to route my internet traffic over all my available connections (like LAN and Data card(3G)), based on conditions like, if a website is blocked over LAN, that traffic goes through Data Card (or other available internet connection). My ultimate motive is to integrate this feature in my web browser which I have already built using C# and .Net framework. I have found that one can add a route by using the following cmd command - route add DestinationIP mask subnet InterfaceGatewayIP but I am stuck as to how should it be implemented using C#?

    Read the article

  • Two network adapters on Ubuntu Server 9.10 - Can't have both working at once?

    - by Rob
    I'm trying to set up two network adapters in Ubuntu (server edition) 9.10. One for the public internet, the other a private LAN. During the install, I was asked to pick a primary network adapter (eth0 or eth1). I chose eth0, gave the installer the details listed below in the contents of /etc/network/interfaces, and carried on. I've been using this adapter with these setting for the last few days, and every thing's been fine. Today, I decide it's time to set up the local adapter. I edit the /etc/network/interfaces to add the details for eth1 (see below), and restart networking with sudo /etc/init.d/networking restart. After this, attempting to ping the machine using it's external IP address fails, but I can ping it's local IP address. If I bring eth1 down using sudo ifdown eth1, I can successfully ping the machine via it's external IP address again (but obviously not it's internal IP address). Bringing eth1 back up returns us to the original problem state: external IP not working, internal IP working. Here's my /etc/network/interfaces (I've removed the external IP information, but these settings are unchanged from when it worked) rob@rhea:~$ cat /etc/network/interfaces # This file describes the network interfaces available on your system # and how to activate them. For more information, see interfaces(5). # The loopback network interface auto lo iface lo inet loopback # The primary (public) network interface auto eth0 iface eth0 inet static address xxx.xxx.xxx.xxx netmask xxx.xxx.xxx.xxx network xxx.xxx.xxx.xxx broadcast xxx.xxx.xxx.xxx gateway xxx.xxx.xxx.xxx # The secondary (private) network interface auto eth1 iface eth1 inet static address 192.168.99.4 netmask 255.255.255.0 network 192.168.99.0 broadcast 192.168.99.255 gateway 192.168.99.254 I then do this: rob@rhea:~$ sudo /etc/init.d/networking restart * Reconfiguring network interfaces... [ OK ] rob@rhea:~$ sudo ifup eth0 ifup: interface eth0 already configured rob@rhea:~$ sudo ifup eth1 ifup: interface eth1 already configured Then, from another machine: C:\Documents and Settings\Rob>ping [external ip] Pinging [external ip] with 32 bytes of data: Request timed out. Request timed out. Request timed out. Request timed out. Ping statistics for [external ip]: Packets: Sent = 4, Received = 0, Lost = 4 (100% loss), Back on the Ubuntu server in question: rob@rhea:~$ sudo ifdown eth1 ... and again on the other machine: C:\Documents and Settings\Rob>ping [external ip] Pinging [external ip] with 32 bytes of data: Reply from [external ip]: bytes=32 time<1ms TTL=63 Reply from [external ip]: bytes=32 time<1ms TTL=63 Reply from [external ip]: bytes=32 time<1ms TTL=63 Reply from [external ip]: bytes=32 time<1ms TTL=63 Ping statistics for [external ip]: Packets: Sent = 4, Received = 4, Lost = 0 (0% loss), Approximate round trip times in milli-seconds: Minimum = 0ms, Maximum = 0ms, Average = 0ms So... what am I doing wrong?

    Read the article

  • Isolating VMware virtual machines from the network

    - by jetboy
    I have: VMware Workstation 7 running on a Windows 7 box (with a single NIC), with multiple virtual machines running a range of OSs. The host box is connected to a WRT54G router running Tomato firmware. The router is acting as a wireless bridge to another WRT54G that's wired to my broadband modem. I can access the VMs externally via VNC using VMware's Remote Display. Over time I've had these running: a. Using NAT networking (single IP) with port forwarding on the router and a custom port in VMware for each VM. b. Using bridged networking with static IPs assigned to each VM via MAC address, and port forwarding on the router to each IP running with standard ports. Either way, the host box, and other physical machines on the network are accessible from the VMs. Is there a way to isolate the VMs from the rest of the network, but still maintain internet access and remote VNC to the VMs?

    Read the article

  • Failed to open the Parallels networking module

    - by user49204
    I'm running Parallels Desktop 7 on OSX Lion and encounter the issue in the subject on every time I'm trying to launch Parallels VM. The error message contains a hint to restore to network configuration default which does not help. As been advised by some forums to ran the following script: sudo kextutil "/Library/Parallels/Parallels Service.app/Contents/Kexts/10.6/prl_hypervisor.kext" sudo kextutil "/Library/Parallels/Parallels Service.app/Contents/Kexts/10.6/prl_hid_hook.kext" sudo kextutil "/Library/Parallels/Parallels Service.app/Contents/Kexts/10.6/prl_usb_connect.kext" sudo kextutil "/Library/Parallels/Parallels Service.app/Contents/Kexts/10.6/prl_netbridge.kext" sudo kextutil "/Library/Parallels/Parallels Service.app/Contents/Kexts/10.6/prl_vnic.kext" The output of: sudo kextutil "/Library/Parallels/Parallels Service.app/Contents/Kexts/10.6/prl_netbridge.kext" is: Diagnostics for /Library/Parallels/Parallels Service.app/Contents/Kexts/10.6/prl_netbridge.kext: Warnings: The booter does not recognize symbolic links; confirm these files/directories aren't needed for startup: /Library/Parallels/Parallels Service.app/Contents/Kexts/10.6/prl_netbridge.kext/Contents/CodeDirectory /Library/Parallels/Parallels Service.app/Contents/Kexts/10.6/prl_netbridge.kext/Contents/CodeRequirements /Library/Parallels/Parallels Service.app/Contents/Kexts/10.6/prl_netbridge.kext/Contents/CodeResources /Library/Parallels/Parallels Service.app/Contents/Kexts/10.6/prl_netbridge.kext/Contents/CodeSignature Dependency Resolution Failures: No kexts found for these libraries: com.parallels.kext.prl_hypervisor I've noticed that prl_netbridge is not being loaded (when I'm trying to unload it, I'm notified it is not loaded). Am I doing something wrong? What can be the reason for such behaviour?

    Read the article

  • Virtual bridged networking with VLAN, could not ping

    - by v.yegy
    I require a virtual network with VLAN be build between two virtual hosts - which can be (lxc/ vbox -ubuntu or win xp). I tried with lxc and vbox with Ubuntu and was finding difficult to make it work without vlan, but was successful with vbox with xp. vbox-xp1 --- br1 ---------------- br2 ---- vbox-xp2 The config is: brctl addbr br1; brctl addbr br2 ifconfig br1 up; ifconfig br2 up stp br1 off; stp br2 off ip link add name br1-br2-l0 type veth peer name br1-br2-l1 sudo brctl addif br1 br1-br2-l0 sudo brctl addif br2 br1-br2-l1 vbox - xp 1 and 2 with network ; bridged and br1 and br2 respectively. The adapter is intel PRO/1000 MT Server and driver installed in guests. Configured IPs and two hosts pinged! VLAN config: ip link add link br1 name br1-2.5 type vlan id 5 brctl addif br2 br1-2.5 create vlan 5 in xp 1 and 2 and assign ip address Ping on with this config does not work. Wireshark trace on interface br1-br2-l1 / br1-2.5 shows that one ping results in ~240 ping packets and each growing by 4 bytes - first one being correct and 60, ping does not reach other host as I see mac is not learnt[arp -a]. -- if br1-2.5 is not configured, I see untagged packets in br1-br2-l1/0, but still not reaching other host as mac is not learnt. if br1-br2-l0/1 is made down, even if br1-2.5 is up, I count not see any packets. I tried with ebtables, but still could not make a correct config to work. -- If any one here are aware of any configuration, please let me know. I need to make a network of switches. Seems I have a very long way. Sorry for a very long question. Thanks and regards, vy

    Read the article

  • ESXi and Networking Devices

    - by EsxiUser
    I have two intel pro 1000 pt nics. One quad and one dual port. I want to assign all nic ports to a VM. I enabled PCI passthrough on all devices but ESXi will only allow me to add two nic ports until it tells me the maximum number of pci devices have been added. I have also tried setting up a virtual switch but it didn't seem like this would give full access to the nics. What is the best way to setup the nics to the VM has direct access to them? This is for a firewall VM.

    Read the article

  • VirtualBox reinstalling & updating has left me with Too Many Network Adapters. How Do i remove them?

    - by S3curityPlu5
    I have too many network adapters. I have had to reinstall, repair VirtualBox a few times, and I have three NICs in my laptop. I definitely don't need to have 14 bridged networking drivers though, and I cannot uninstall them. I only want to keep the new ones that came with VirtualBox 4.1.20. When I go into the registry there are tons of places with these adapters. I have searched online up to 10 pages of Google, and VirtualBox forums, and no one has mentioned this problem nor explained how to delete these annoying extra network adapters. Please offer some assistance or at least tell me how anybody else has dealt with this. I only need 1 host-only network adapter, 1 bridged networking adapter for each of my network cards. Take a look:

    Read the article

  • Networking 2 Virtual PC with one VPC as DHCP server

    - by vivek
    My host OS is Win XP Professional. The host has a real network connection via DSL and I created a second network connection using Microsoft Loopback Adapter. Internet connection sharing is enabled. The Microsoft Loopback adapter has a IP address of 192.168.0.1. I have 1 Virtual PC which has Windows Server 2003. I have setup the network connection on this VPC to use Microsoft Loopback Adapter. I setup this VPC to be the Domain Controller , DNS Server and DHCP Server. I set this to a static IP address 192.168.0.2 (on the same subnet as the MS Loopback adapter) I have a second Virtual PC which also has Windows Server 2003. The network connection on this VPC is set to "Local Only". I want this VPC to get its IP address from the 1st VPC on which I setup as a DHCP server. What i want is the 2 VPC should be in a network with one of the VPC acting as the domain controller, DNS Server and DHCP server. The second VPC shoud get its IP address from the 1st VPC. It should be a part of the domain of the 1st VPC. When i tried to make the second VPC get the IP address from the first VPC I am not succeeding. Can somebody post some suggestions on how to go about this ?

    Read the article

  • Networking DOS within Windows 7 XP Mode, with a Windows XP/7 Networked Share

    - by theonlylos
    For awhile now, one of my clients has been stuck with Corel Paradox 4.0 (it used to be the biggest database system in the DOS days, until Microsoft released Access in the early 90's) so for awhile I've managed to keep it on life support on Windows XP for a few years, however since switching to Windows 7 x64, I've had to resort to using XP Mode as the sandbox to keep it up and running. While I am able to run Paradox as usual in XP Mode, I'm having a serious issue where if I try connecting the install to the network share (which is located on the Windows 7 portion of the system), Paradox keeps exiting because it says the serial number is invalid. Now, I know for a fact that this is an issue with the virtual loopback adapter and also having the VM linked to the physical ethernet adapter -- and while I have solved this issue before, most of my fixes have been bandages since after a few weeks the issue pops up again. Long story short, I wanted to ask if there is a permanent way to link a DOS program to a network share address. For example, when I try doing \tsclient\paradox (the Windows 7 Address) I keep getting an error saying I need a valid network address. I've tried mapping that folder to various drive letters such as P:\Paradox -- but for some reason that keeps failing over time. For what it's worth, Paradox uses a .SOM file to store the network settings, however it isn't editable in Notepad but rather it's controlled by a wizard in Paradox. But if that extension rings any bells, I'd welcome any insights.

    Read the article

  • Setting up a static IP address (public) in Ubuntu

    - by ycseattle
    I have a business class internet connection and need to setup a static ip address for a machine. I did a search online and only find how to setup static local ip addresses (like 192.168..). I tried the same technique, and only setup the ip address and netmask, but after restart networking the computer could not connect to the outside world. This is what I did: 1) edit /etc/network/interfaces iface eth0 inet static address 173.10.xxx.xx netmask 255.255.255.252 2) edit /etc/resolv.conf search wp.comcast.net nameserver xx.xx.xx.xxx nameserver xx.xx.xx.xxx 3) restart network sudo /etc/init.d/networking restart Now the last step didn't report error, ifconfig shows the ip address was set, but this server cannot connect to outside world, ping google.com and reports "unknown host google.com". Any ideas?

    Read the article

  • Hyper-V Cluster with failover - NETWORKING

    - by Adam
    Hi We are looking to setup a 3 node Hyper-V cluster with live migration and failover using: 3 x Dell R710's with dual quad core Xeon & 128 GB RAM & 6 NICs in each 1 x Dell MD 3220i SAN We will be running this setup from a data center and so co-locating our kit. Can anybody explain how we should setup the network connections to make the system redundant? We have looked into this great article but are not sure how to get a 3 server setup correctly and reliably: http://faultbucket.ca/2011/01/hyper-v-failover-cluster-setup/. I believe we need network connections for: live migration, heartbeat, management, hyper-v etc. I assume as we are running it from a DC all IPs will have to be public IPs? Are AD servers will be VMs. One on each Hyper-V server and setup not to be HA.

    Read the article

  • network configuration busted good

    - by jldupont
    On my Linux Ubuntu Karmic machine, when I try to net conf list I get: [2010/03/14 21:25:18, 0] registry/reg_init_basic.c:32(registry_init_common) Failed to initialize the registry: WERR_ACCESS_DENIED I think I may have busted my networking configuration good this time... I can't get Nautilus "networking" functions to work i.e. the "Places - Network" won't show my Windows workgroup anymore... Please help! note1: I have verified my SAMBA configuration and it isn't the problem. note2: I have uninstalled Winbind, Dnsmasq and Squid to get my configuration as simple as possible to debug.

    Read the article

  • Error installing Network driver

    - by Simon Carpentier
    I'm tring to install NetLimiter 3 (3.0.0.10, x64) on my Windows 7 x64 machine. At the driver installation step, I'm getting an error: Error 0x8004a029: Couldn't install the network component. (InstallNdisIMDriver) UPDATE 2010-09-20: I received a response to my support request: Hi Simon, It seems that problem is rather on your system than in NL3. Too many networking applications (VPN, Virtual computers) are installed on your machine and they are preventing NL3 from proper installation. In order to install NetLimiter 3, try to disable/temporarily remove these apps. Several users had the same problem and shuffling with adapter and networking software helped them. Please, let us know which action helps you (if any). Sincerely, Jan Bilek Any thoughts on this?

    Read the article

  • Can SATA be used to connect computers?

    - by André
    Can SATA be used to connect two computers together, just like a crossover Ethernet cable would do ? I know SATA has no "networking" features and even though a controller may have multiple ports, the drives don't "see" each other, and that in SATA one device acts as the host (the computer) and the other device is some kind of "client" (the storage drive). But still, did anyone attempt to make a kernel module that would make one computer appear as a "client" (so that the host's SATA controller detects it as a standard hard drive) and then set up like a pseudo-Ethernet link or a very high speed serial link (and then run pppd on it and do networking) ? Note : I know this is an unprofessional and totally stupid idea, I'm just asking out of curiosity.

    Read the article

  • Can a faulty DNS record prevent networking?

    - by Bob
    My server's network interfaces are not available anymore since yesterday evening. I didn't change anything, but I added a new DNS-record shortly before. Unfortunately, the web interface I used to add this DNS record escaped some characters, so I've got a faulty DNS record: example.com 86400 IN TXT "\"v=spf1 mx a -all\"" However, this is the only unusual thing I could notice about this. Is it possible that the \-characters in my DNS record are confusing for some routers? Or could it be the system itself which is confused by this (it's a Debian Lenny system). Unfortunately, I can't quick-test it because of the long TTL of the record.

    Read the article

< Previous Page | 57 58 59 60 61 62 63 64 65 66 67 68  | Next Page >