Search Results

Search found 2616 results on 105 pages for 'yi ping'.

Page 61/105 | < Previous Page | 57 58 59 60 61 62 63 64 65 66 67 68  | Next Page >

• Windows Server 2012 VPN Server on AWS VPC EC2 Instance

  - by abran

  I'd like to use window server 2012 VPN on a AWS VPC EC2 instance. The VPC has one public subnet and the EC2 instance has one network adapter. I've taken the following steps, but have been unsuccessful; am I missing a step or configuration? Thanks. Configured an elastic IP for the VPC Enabled protocols 47, 50, & 51 Added the RRAS role to the (EC2 instance) server Configured the RRAS for vpn only. Note: I'm able to RDP to the EC2 instance, but not able to ping the external IP.

  Read the article

• How to force a host to not send a broadcast for an IP address in its own subnet?

  - by Bruce

  For a LAN, instead of a switch, I have built a topology where each machine is connected to a router. Each host is assigned an IP address from 10/8. Here are the interface details: Lets say I ping 10.16.0.3 from this host. The routing table of 10.16.0.2 has been configured to use the router (10.16.0.1) as the default gateway. But since the destination IP address (10.16.0.3) is in the same subnet it sends out an ARP broadcast. I want to disable this behavior of sending an ARP broadcast and instead force it to use the routing table. How do I accomplish this?

  Read the article

• Innodb : cannot allocate the memory for the buffer pool

  - by mingyeow

  My innodb keeps crashing. This is the error message below. Does anyone know why this keeps happening? InnoDB: by InnoDB 49201616 bytes. Operating system errno: 12 InnoDB: Check if you should increase the swap file or InnoDB: ulimits of your operating system. InnoDB: On FreeBSD check you have compiled the OS with InnoDB: a big enough maximum process size. InnoDB: Note that in most 32-bit computers the process InnoDB: memory space is limited to 2 GB or 4 GB. InnoDB: We keep retrying the allocation for 60 seconds... 0 processes alive and '/usr/bin/mysqladmin --defaults-file=/etc/mysql/debian.cnf ping' resulted in /usr/bin/mysqladmin: connect to server at 'localhost' failed error: 'Can't connect to local MySQL server through socket '/var/run/mysqld/mysqld.sock' (2)' Check that mysqld is running and that the socket: '/var/run/mysqld/mysqld.sock' exists! InnoDB: Fatal error: cannot allocate the memory for the buffer pool [ERROR] Default storage engine (InnoDB) is not available

  Read the article

• Cannot connect to Musicbrainz VirtualBox through SSH using Mac

  - by olovholm

  I am trying to connect my mac terminal shell to a VirtualBox running the Musicbrainz server. I have configured the network through a BridgeAdapter and running ifconfig on both the host and the guest show corresponding IP addresses. I can now ping the guest, but I cannot connect through SSH. The verbose output from the SSH client on my mac states: (olaenv)hf-79-202:Python oclovhol$ ssh -vv [email protected] OpenSSH_5.6p1, OpenSSL 0.9.8r 8 Feb 2011 debug1: Reading configuration data /etc/ssh_config debug1: Applying options for * debug2: ssh_connect: needpriv 0 debug1: Connecting to 127.0.0.1 [127.0.0.1] port 22. debug1: Connection established. debug1: identity file /Users/oclovhol/.ssh/id_rsa type -1 debug1: identity file /Users/oclovhol/.ssh/id_rsa-cert type -1 debug1: identity file /Users/oclovhol/.ssh/id_dsa type -1 debug1: identity file /Users/oclovhol/.ssh/id_dsa-cert type -1 ssh_exchange_identification: Connection closed by remote host

  Read the article

• Cloudstack virtual machines can't communicate with virtual routers when they are on different hosts

  - by Jorge Suárez de Lis

  I'm using Cloudstack 2.2.14 on a Ubuntu 10.04 set of hosts, and I have a problem on my setup. I have two hosts running. When a virtual router is created on host 1 and a virtual machine using that virtual router is created on host 2, or vice versa, I have no connectivity at all on the virtual machine. First of all, I have to setup the network manually on that virtual machine -usually DHCP is working, but not here-. Then, I can't ping to the virtual router from the virtual machine or vice versa. When both virtual router and virtual machine are created on the same host, everything works! Maybe those packages are being filtered somehow? I have no clue on how to proceed. Both hosts can communicate directly outside the virtualization.

  Read the article

• Connect to internet through DC with 2 network interfaces

  - by Ali Foroughi

  I have a network like this : Client 1 <== Wireless ==> Access Point <== Wire ==> DC <== Wireless ==> ADSL Modem Client 1 : IP : 192.168.1.181 DG : 192.168.1.100 DNS : 192.168.1.100 Access Point : IP : 192.168.1.10 DG : 192.168.1.100 DC : IP : 192.168.1.100 DG : 192.168.1.1 DNS : 127.0.0.1 ADSL Modem : IP : 192.168.1.1 I can ping yahoo.com from client1, but cannot browse the internet. UPDATE1 : my DC has two network interfaces that I bridge together. UPDATE2 : I powered down the DC firewall UPDATE3 : I set a forwarder for my DC to 8.8.8.8 (Google dns)

  Read the article

• Trouble opening my router to my web server [closed]

  - by justin

  Here's the story. I have a webs server created and connected to my router. The website works great when I'm connected to the router, but when I'm off the network I can't access the website. I got the IP for my router by googling "what is my ip." I have opened ports 80 to 10080 to link to the server in the router. THe firewall is off. I can ping the router. One odd thing that I don't understand. When I am in network if I access XXX.XXX.XX.XX:80 I can access the web page no problem. If I access XXX.XXX.XX.XX:81 (or any other port) I get the error "Cannot access server." Any idea what the problem could be? Could it be my ISP?

  Read the article

• How to Automate .inf PnP Windows 7 Drivers with Wildcard?

  - by Dos_Probie

  I am trying to automate the PnP driver installs for Windows 7 with either of the below batch files via For loop and wildcard for the .inf file. The rundll32 batch reads and echos the correct .inf file but then gives me the "Error Installation failed" and with the pnputil batch it runs without any error put does not install. How can I correct the batch files to install the inf correctly? @echo off&color a&setlocal enabledelayedexpansion cd %~dp0 set PnP=rundll32 syssetup,SetupInfObjectInstallAction DefaultInstall 128 .\*.inf for /f "delims=" %%a in ('dir/b %PnP%') do ( echo == Installing PnP Drivers == "%%a" ::or set PnP=pnputil -i -a "*.inf" for /f "delims=" %%a in ('dir/b %PnP%') do ( echo == Installing PnP Drivers == "%%a" ping -n 3 localhost 1>nul start "" /wait %PnP%\%%a ) cls echo. * DONE * pause exit

  Read the article

• Network Configuration

  - by Dario

  Hello, This is my situation: Router A: IP 192.168.1.1 Mask 192.168.1.0/24 - Connected to the internet. Server: - Interface eth0: inet addr:10.1.1.125 Mask:255.255.255.0 (connected to router B) - Interface ra0: inet addr:192.168.1.125 Mask:255.255.255.0 (connected to router A) Router B: IP 10.1.1.254 Mask 10.1.1.0/24 - Connected to Server's eth0 Computer: connected to Router B via WiFi connection. I configured a static route on Router B that use as default gateway 192.168.1.125 and i can ping that ip from computer. The problem is: how i can connect to the internet ? In other words, traffic coming from Server eth0 should use ra0 as gateway. Any suggestion ? Thank you

  Read the article

• How can I delete virtual networks from command line?

  - by David Cobb

  I have Hyper-V Server 2008 R2 (without GUI) running at my colo for a week. I was connected via RDP and could use the menu interface and command line. I figured out how to connect Hyper-V Manager from my Win7 laptop (THANK YOU HVREMOTE!), and created and installed my VM. I created a virtual network that didn't work (no connectivity from my VM) so I created another using different settings, and now have lost access to the Hyper-V host. No ping, no RDP. Since I don't have console access, I cannot troubleshoot. I believe if I deleted the Virtual Networks I'd regain access, but I need a command line instruction for this, that the staff onsite could enter to accomplish this. I find no help anywhere obvious (MSDN, etc), the keywords are too general. Can anyone refer me to simple steps how to do this over command line or with the menu based interface on the console?

  Read the article

• Rsyslog mail module not working

  - by Henry-Nicolas Tourneur

  I would like to email snort alerts from my Debian Lenny fw. Syslog is sending log messages from the firewalls to a central rsyslog. On my central rsyslog, I got something like : $ModLoad ommail $ActionMailSMTPServer server.company.local $ActionMailFrom [email protected] $ActionMailTo [email protected] $ActionExecOnlyOnceEveryInterval 1 $template mailSubject,"[SNORT] Alert from %hostname%" $template mailBody,"Snort message\r\nmsg='%msg%'" $ActionMailSubject mailSubject if $msg regexp 'snort[[0-9]]: [[0-9]:[0-9]:[0-9]].*' then ommail:;mailBody But I doesn't get any mails, I even can trigger snort with something like ping -s 1400, it logs things like following but still no mail ! 2010-01-08T09:25:58+00:00 Hostname snort[4429]: [1:499:4] ICMP Large ICMP Packet [Classification: Potentially Bad Traffic] [Priority: 2]: {ICMP} ip_dest - ip_src Any idea ?

  Read the article

• WEP key not working on laptop running Ubuntu

  - by stupid-idiot

  I can't connect to my router via wifi from my laptop (running Ubuntu) even if I'm 100% sure the WEP key I punch in is correct. It works via LAN though. I'm also not able to ping localhost 127.0.0.1. I had some problems setting up the radio on my network card but I think that that works since it finds some wireless networks. (Although it's much much faster than Windows it's useless since I can't download any libraries for development.) What could be wrong with my setup?

  Read the article

• Apache localhost problem

  - by hart1994

  I have set up Apache on my Windows 7 PC. Now I have it working fine on the PC, by going to localhost or the IP (192.168.1.71). However when I go to my Mac I try to connect to it via its IP and it doesn't connect. I have also tried this on another computer. Oops! Google Chrome could not connect to 192.168.1.71 Now is there something wrong with the code in the Apache httpd file? EDIT: I have also tried to ping the IP address and it works fine.

  Read the article

• Vmware sphere setting up external network

  - by Tom Beech

  I've just setup vmware vsphere 5 on a remote server (rented dedicated server). I've added my first VPS (centos 5.8) barebones. It's not finding any IP (internal or external) on boot. I've had an extra external IP assigned to my server that I wanted to use on the VPS. I tried editing the eth0 config and adding the IP in there and turning off the DHCP, but it can't find any IP or ping google or do any networking type things. How do I route the IP to my VPS so I can access it remotely?

  Read the article

• Internet wireless connected with limited access, windows vista

  - by r0ca

  I had some malware in my computer so I did a bit of manual work to remove it including resetting TCP/IP. Now the malware is gone. I can see my home wireless network and I can get connected to it but when connected I get the Internet wireless connected with limited access message. When I go to the IE I cannot browse. When I tried to ping 192.168.1.1 I got an Error Code 1231 Unconnected Network Problem. I have deactivated my Windows firewall as I thought it could be hyperactive security. Still no luck. I have Norton but it is not active, I have also Avast and AVG installed but they are not active. Any ideas?

  Read the article

• How do I configure OpenVPN for accessing the internet with one NIC?

  - by Lekensteyn

  I've been trying to get OpenVPN to work for three days. After reading many questions, the HOWTO, the FAQ and even parts of a guide to Linux networking, I cannot get my an Internet connection to the Internet. I'm trying to set up a OpenVPN server on a VPS, which will be used for: secure access to the Internet bypassing port restrictions (directadmin/2222 for example) an IPv6 connection (my client does only have IPv4 connectivity, while the VPS has both IPv4 and native IPv6 connectivity) (if possible) I can connect to my server and access the machine (HTTP), but Internet connectivity fails completely. I'm using ping 8.8.8.8 for testing whether my connection works or not. Using tcpdump and iptables -t nat -A POSTROUTING -j LOG, I can confirm that the packets reach my server. If I ping to 8.8.8.8 on the VPS, I get an echo-reply from 8.8.8.8 as expected. When pinging from the client, I do not get an echo-reply. The VPS has only one NIC: etho. It runs on Xen. Summary: I want to have a secure connection between my laptop and the Internet using OpenVPN. If that works, I want to have IPv6 connectivity as well. Network setup and software: Home laptop (eth0: 192.168.2.10) (tap0: 10.8.0.2) | | (running Kubuntu 10.10; OpenVPN 2.1.0-3ubuntu1) | wifi | router/gateway (gateway 192.168.2.1) | INTERNET | VPS (eth0:1.2.3.4) (gateway, tap0: 10.8.0.1) (running Debian 6; OpenVPN 2.1.3-2) wifi and my home router should not cause problems since all traffic goes encrypted over UDP port 1194. I've turned IP forwarding on: # echo 1 > /proc/sys/net/ipv4/ip_forward iptables has been configured to allow forwarding traffic as well: iptables -F FORWARD iptables -A FORWARD -m state --state RELATED,ESTABLISHED -j ACCEPT iptables -A FORWARD -s 10.8.0.0/24 -j ACCEPT iptables -A FORWARD -j DROP I've tried each of these rules separately without luck (flushing the chains before executing): iptables -t nat -A POSTROUTING -s 10.8.0.0/24 -o eth0 -j SNAT --to 1.2.3.4 iptables -t nat -A POSTROUTING -s 10.8.0.0/24 -o eth0 -j MASQUERADE route -n before (server): 1.2.3.4 0.0.0.0 255.255.255.0 U 0 0 0 eth0 0.0.0.0 1.2.3.4 0.0.0.0 UG 0 0 0 eth0 route -n after (server): 1.2.3.4 0.0.0.0 255.255.255.0 U 0 0 0 eth0 10.8.0.0 0.0.0.0 255.255.255.0 U 0 0 0 tap0 0.0.0.0 1.2.3.4 0.0.0.0 UG 0 0 0 eth0 route -n before (client): 192.168.2.0 0.0.0.0 255.255.255.0 U 2 0 0 wlan0 169.254.0.0 0.0.0.0 255.255.0.0 U 1000 0 0 wlan0 0.0.0.0 192.168.2.1 0.0.0.0 UG 0 0 0 wlan0 route -n after (client): 1.2.3.4 192.168.2.1 255.255.255.255 UGH 0 0 0 wlan0 10.8.0.0 0.0.0.0 255.255.255.0 U 0 0 0 tap0 192.168.2.0 0.0.0.0 255.255.255.0 U 2 0 0 wlan0 169.254.0.0 0.0.0.0 255.255.0.0 U 1000 0 0 wlan0 0.0.0.0 10.8.0.1 128.0.0.0 UG 0 0 0 tap0 128.0.0.0 10.8.0.1 128.0.0.0 UG 0 0 0 tap0 0.0.0.0 192.168.2.1 0.0.0.0 UG 0 0 0 wlan0 SERVER config proto udp dev tap ca ca.crt cert server.crt key server.key dh dh1024.pem server 10.8.0.0 255.255.255.0 push "redirect-gateway def1" ifconfig-pool-persist ipp.txt keepalive 10 120 tls-auth ta.key 0 comp-lzo user nobody group nobody persist-key persist-tun log-append openvpn-log verb 3 mute 10 CLIENT config dev tap proto udp remote 1.2.3.4 1194 resolv-retry infinite nobind persist-key persist-tun ca ca.crt cert client.crt key client.key ns-cert-type server tls-auth ta.key 1 comp-lzo verb 3 mute 20 traceroute 8.8.8.8 works as expected (similar output without OpenVPN activated): 1 10.8.0.1 (10.8.0.1) 24.276 ms 26.891 ms 29.454 ms 2 gw03.sbp.directvps.nl (178.21.112.1) 31.161 ms 31.890 ms 34.458 ms 3 ge0-v0652.cr0.nik-ams.nl.as8312.net (195.210.57.105) 35.353 ms 36.874 ms 38.403 ms 4 ge0-v3900.cr0.nik-ams.nl.as8312.net (195.210.57.53) 41.311 ms 41.561 ms 43.006 ms 5 * * * 6 209.85.248.88 (209.85.248.88) 147.061 ms 36.931 ms 28.063 ms 7 216.239.49.36 (216.239.49.36) 31.109 ms 33.292 ms 216.239.49.28 (216.239.49.28) 64.723 ms 8 209.85.255.130 (209.85.255.130) 49.350 ms 209.85.255.126 (209.85.255.126) 49.619 ms 209.85.255.122 (209.85.255.122) 52.416 ms 9 google-public-dns-a.google.com (8.8.8.8) 41.266 ms 44.054 ms 44.730 ms If you have any suggestions, please comment or answer. Thanks in advance.

  Read the article

• Configuring a Genius GW-7200 Access Point

  - by alex

  I came across an access point we had a few years ago. I'm now trying to get it set up to work on our network. here are a couple of pictures: http://twitpic.com/194u06/full http://twitpic.com/194u0v/full I have plugged this into our network via the network port on the back. I set up a DHCP reservation, based on the MAC address on the back of the access point, however I cannot ping it, nor access the web interface. I've held down the reset button for 10 seconds, to see if that would do anything. Google doesn't come up with anything on the matter :-(

  Read the article

• HowTo access Samba Share over VPN Tunnel?

  - by Jeff

  I don't know how to access a Samba share running on a Ubuntu 10.04 server through OpenVPN 2.1.0. I've installed & configured OpenVPN and everything works. The server end of the tunnel has the IP of 10.8.0.1. When I connect from XP (over our local network) I'm given the IP of 10.8.0.6. I can ping and trace route from both ends of the tunnel. Now, I'm lost...how to access the Samba share from XP and from OS X?

  Read the article

• Reputable web based ssh client? [closed]

  - by Doug T.

  I'm connected to a coffee shop's wireless network right now, and I suspected I'd be able to use my laptop and ssh somewhere. Unlucky me they seem to be blocking everything but web traffic (my testing seems to show everything but port 80 is working, can't ping, ftp, etc). I googled "web based ssh clients" however I have reservations about entering my login credentials on any Joe Schmoe's web app. I was wondering if anyone has had any experience with any reputable web based ssh clients? If so could you please point me at one that I could trust?

  Read the article

• dns update frequency

  - by Roderik

  I was looking after the frequency of dns updates, since I had to change the location fo the vps that hosts the domain contents. What I ussualy read is that it takes up to 72 hours to get these changes propagated, sometimes this can be sooner based on your location. I changed the nameservers for the domain vasco-da-gama.nl about a week ago. When I ping the domain name from different locations it still points the old vps (which does not exist anymore). I was wondering if its normal that it can take this long for the change to point my new vps? If I might have done something wrong here, where should I look for it (it looks all ok, when I check it). If it is reachable from your location (if so, its probably a matter of time it will propagate to my location).

  Read the article

• Linux (Kubuntu 9.10): Strange DNS problem [seems to be IPv6 issue]

  - by Homer J. Simpson

  Hi, I'm experiencing strange problems with my Kubuntu 9.10 when doing DNS requests from various applications. The requests are extremely slow, so loading any pages in Firefox or Konqueror, doing package installations in Kpackagemanager and other apps is really painful, while for example Opera doesnt have any problems, and ping is normally fast as well for DNS pings. I checked the proxy settings of both the used applications as well as of the general system and there are none, so to me it doesn't seem as there was something inbetween.. Does anybody have an idea on what to check for possible problem sources or how to solve this ? I'm behind a DSL home router which does the DHCP (and works well with my other computer). Any kind of advice would be really helpful. Edit: It seems to be some kind of IPv6 problem, as I could get it to work by disabling IPv6 explicitly in Firefox. Is there a general solution to this ?

  Read the article

• Connect to MS Sql 2008 on local VM

  - by Campo

  I have a test machine. Server 2008 with Hyper V MSSQL 2008 Enterprise Lets call it MACHINE A on the VM it is as well Server 2008 with another MSSQL 2008 Ent Call it VM B I setup a DB on MACHINE A then backed it up and restored following the prepare database for mirroring instructions on MSDN onto VM B. I used to be able to connect to the VM B Instance from the main test server (MACHINE A) but now I cannot for some reason. It cannot seem to find the instance at all even when I browse network databases. I can ping the VM from any computer on the network and access its shares so I know it is discoverable. Just the end of a long day maybe I am missing something here.

  Read the article

• DNS error only in IE

  - by Le_Quack

  Our Intranet page has stopped working on some machines/some user accounts. The error I am getting points to a DNS issue but If I ping the site from the command line the it responds fine. The error I'm gettting on IE is Error: The web filter could not find the address for the requested site Why are you seeing this: The system is unable too determine the IP address of intranet.example.com I'm not quite sure why it mentions the web filter as there is a proxy exception for the intranet page and if I run a trace route it doesn't go via the web proxy (filtering system). Finally it isn't affecting everyone, just random users, also it doesn't affect the random users on all the client machines they use. I have one user where it happens on any client they log onto where most its just certian clients. It's even "fixed" itself for a few peoples. EDIT: hey Mikey thanks for the fast response. Proxies are correct and automatic configuration is off (both via GPO)

  Read the article

• Routing traffic to another internal network

  - by Jason

  OK, so here is the scenario. I have 4 Locations connected with an MPLS. I have installed an ASA at the primary location which is 10.20.1.0. Traffic is fine internally and to the world, however... I can't route traffic over the MPLS to another network. It is being blocked by an implicit deny rule even though there is a rule to allow any to any less secure interface (it should be using the same interface in/out, right?). I have a static route for the network in and the ASA can ping it - Just not traffic on the internal network of the ASA. -Jason

  Read the article

• test of ICMP block

  - by Marcos

  In my bash scripts I have been using something like: until fping -u google.com; do echo "$0[$$] Network/DNS down?? $(date)" 1>&2 && sleep $(($RANDOM%(1 + ++trynum * 1) +1)).222; done to test for online connectivity. It halts in place, sleeping growing random intervals, until it can ping google.com again. Problem: At some sites ICMP pings are blocked altogether, and web pages are still reachable. What's a short way to test for this general case? Based on that test I will switch over to an http-based test like the exit status of curl -s google.com >/dev/null if that is a good one.

  Read the article

< Previous Page | 57 58 59 60 61 62 63 64 65 66 67 68  | Next Page >