Search Results

Search found 1742 results on 70 pages for 'combine'.

Page 62/70 | < Previous Page | 58 59 60 61 62 63 64 65 66 67 68 69  | Next Page >

• Recent Innovations to ILOM

  - by B.Koch

  by Josh Rosen If you are wondering how Oracle can make some of the most advanced, reliable, and fault tolerant servers on the market, look no further than Oracle Integrated Lights Out Manager or ILOM.  We build ILOM into every server we create, from Oracle x86 Systems such as X3-2 to the SPARC T-Series family. Oracle ILOM is an embedded service processor, but it's really more than that.  It's a computer within a computer.  It's smart, it's tightly integrated into all aspects of the server's operation, and it's a big reason why Oracle servers are used for some of the most mission-critical workloads out there. To understand the value of ILOM, there is no better place to start than its fault management capability.  We have taken the sophisticated fault management architecture from Solaris, developed and refined over a decade, and built it into each and every ILOM. ILOM detects a potential issue at its earliest stage, watching low-level sensors.   If the root cause of a problem is not clear from a single error reading, ILOM will look for other clues and combine multiple pieces of information to correctly identify a failing component. ILOM provides peace of mind. We tailor our fault management for each new server platform that we produce.  You can rest assured that it's always actively keeping the server healthy.  And if there is a problem, you can be confident it will let you know by sending you a notification by e-mail or trap. We also heard IT managers tell us they needed a Ph.D. in computer engineering to manage today's servers. It doesn't have to be that way.  Thanks to the latest innovations to Oracle ILOM, we present hardware inventory and status in way that makes sense – to anyone.  Green means everything is healthy and red means something is wrong.  When a component needs to be replaced a clear message indicates where the problem is and points you at a knowledge article about that problem.  It's that simple. Simpler management and simple interfaces mean reduced complexity and lower costs to manage.  And we know that's really important. ILOM does all this while also providing advanced service processor features you depend on for managing enterprise class systems.  You can remotely control the server power, interact with a virtual video console for the server, and mount media on the server remotely.  There is no need to spend money on a KVM switch to get this functionality. And when people hear how advanced ILOM is, they can't believe ILOM is free.  All features are enabled and included with each Oracle server that you buy.  There are no advanced licenses you need to purchase or features to unlock. Configuring ILOM has also never been easier.  It is now possible to configure almost all aspects of the server directly from ILOM.  This includes changing BIOS settings, persistently modifying boot order, and optimizing power settings -- all directly from ILOM. But Oracle's innovation does not stop with ILOM.  Oracle has engineered Oracle Enterprise Manager Ops Center to integrate directly with ILOM, providing centralized management across all of our servers. Ops Center will discover each of your Oracle servers over the network by searching for ILOMs.  When it finds one, it knows how to communicate with ILOM to monitoring and configure that server from application to disk. Since every server that Oracle produces, from x86 Systems to SPARC T-Series up and down the line, comes with Oracle ILOM, you can manage all Oracle servers in the same way.  And while all of our servers may have different components on the inside, each with their specialized functions, the way you integrate them and the way you monitor and manage them is exactly the same. Oracle ILOM is state-of-art.  If you are looking for a server that make systems management simple and is easy to integrate and maintain, check out the latest advances to Oracle ILOM. Josh Rosen is a Principal Product Manager at Oracle and previously spent more than a decade as a developer and architect of system management software. Josh has worked on system management for many of Oracle's hardware products ranging from the earliest blade systems to the latest Oracle x86 servers.

  Read the article

• Simple-Talk development: a quick history lesson

  - by Michael Williamson

  Up until a few months ago, Simple-Talk ran on a pure .NET stack, with IIS as the web server and SQL Server as the database. Unfortunately, the platform for the site hadn’t quite gotten the love and attention it deserved. On the one hand, in the words of our esteemed editor Tony “I’d consider the current platform to be a “success”; it cost $10K, has lasted for 6 years, was finished, end to end in 6 months, and although we moan about it has got us quite a long way.” On the other hand, it was becoming increasingly clear that it needed some serious work. Among other issues, we had authors that wouldn’t blog because our current blogging platform, Community Server, was too painful for them to use. Forgetting about Simple-Talk for a moment, if you ask somebody what blogging platform they’d choose, the odds are they’d say WordPress. Regardless of its technical merits, it’s probably the most popular blogging platform, and it certainly seemed easier to use than Community Server. The issue was that WordPress is normally hosted on a Linux stack running PHP, Apache and MySQL — quite a difference from our Microsoft technology stack. We certainly didn’t want to rewrite the entire site — we just wanted a better blogging platform, with the rest of the existing, legacy site left as is. At a very high level, Simple-Talk’s technical design was originally very straightforward: when your browser sends an HTTP request to Simple-Talk, IIS (the web server) takes the request, does some work, and sends back a response. In order to keep the legacy site running, except with WordPress running the blogs, a different design is called for. We now use nginx as a reverse-proxy, which can then delegate requests to the appropriate application: So, when your browser sends a request to Simple-Talk, nginx takes that request and checks which part of the site you’re trying to access. Most of the time, it just passes the request along to IIS, which can then respond in much the same way it always has. However, if your request is for the blogs, then nginx delegates the request to WordPress. Unfortunately, as simple as that diagram looks, it hides an awful lot of complexity. In particular, the legacy site running on IIS was made up of four .NET applications. I’ve already mentioned one of these applications, Community Server, which handled the old blogs as well as managing membership and the forums. We have a couple of other applications to manage both our newsletters and our articles, and our own custom application to do some of the rendering on the site, such as the front page and the articles. When I say that it was made up of four .NET applications, this might conjure up an image in your mind of how they fit together: You might imagine four .NET applications, each with their own database, communicating over well-defined APIs. Sadly, reality was a little disappointing: We had four .NET applications that all ran on the same database. Worse still, there were many queries that happily joined across tables from multiple applications, meaning that each application was heavily dependent on the exact data schema that each other application used. Add to this that many of the queries were at least dozens of lines long, and practically identical to other queries except in a few key spots, and we can see that attempting to replace one component of the system would be more than a little tricky. However, the problems with the old system do give us a good place to start thinking about desirable qualities from any changes to the platform. Specifically: Maintainability — the tight coupling between each .NET application made it difficult to update any one application without also having to make changes elsewhere Replaceability — the tight coupling also meant that replacing one component wouldn’t be straightforward, especially if it wasn’t on a similar Microsoft stack. We’d like to be able to replace different parts without having to modify the existing codebase extensively Reusability — we’d like to be able to combine the different pieces of the system in different ways for different sites Repeatable deployments — rather than having to deploy the site manually with a long list of instructions, we should be able to deploy the entire site with a single command, allowing you to create a new instance of the site easily whether on production, staging servers, test servers or your own local machine Testability — if we can deploy the site with a single command, and each part of the site is no longer dependent on the specifics of how every other part of the site works, we can begin to run automated tests against the site, and against individual parts, both to prevent regressions and to do a little test-driven development In the next part, I’ll describe the high-level architecture we now have that hopefully brings us a little closer to these five traits.

  Read the article

• A C# implementation of the CallStream pattern

  - by Bertrand Le Roy

  Dusan published this interesting post a couple of weeks ago about a novel JavaScript chaining pattern: http://dbj.org/dbj/?p=514 It’s similar to many existing patterns, but the syntax is extraordinarily terse and it provides a new form of friction-free, plugin-less extensibility mechanism. Here’s a JavaScript example from Dusan’s post: CallStream("#container") (find, "div") (attr, "A", 1) (css, "color", "#fff") (logger); The interesting thing here is that the functions that are being passed as the first argument are arbitrary, they don’t need to be declared as plug-ins. Compare that with a rough jQuery equivalent that could look something like this: $.fn.logger = function () { /* ... */ } $("selector") .find("div") .attr("A", 1) .css("color", "#fff") .logger(); There is also the “each” method in jQuery that achieves something similar, but its syntax is a little more verbose. Of course, that this pattern can be expressed so easily in JavaScript owes everything to the extraordinary way functions are treated in that language, something Douglas Crockford called “the very best part of JavaScript”. One of the first things I thought while reading Dusan’s post was how I could adapt that to C#. After all, with Lambdas and delegates, C# also has its first-class functions. And sure enough, it works really really well. After about ten minutes, I was able to write this: CallStreamFactory.CallStream (p => Console.WriteLine("Yay!")) (Dump, DateTime.Now) (DumpFooAndBar, new { Foo = 42, Bar = "the answer" }) (p => Console.ReadKey()); Where the Dump function is: public static void Dump(object options) { Console.WriteLine(options.ToString()); } And DumpFooAndBar is: public static void DumpFooAndBar(dynamic options) { Console.WriteLine("Foo is {0} and bar is {1}.", options.Foo, options.Bar); } So how does this work? Well, it really is very simple. And not. Let’s say it’s not a lot of code, but if you’re like me you might need an Advil after that. First, I defined the signature of the CallStream method as follows: public delegate CallStream CallStream (Action<object> action, object options = null); The delegate define a call stream as something that takes an action (a function of the options) and an optional options object and that returns a delegate of its own type. Tricky, but that actually works, a delegate can return its own type. Then I wrote an implementation of that delegate that calls the action and returns itself: public static CallStream CallStream (Action<object> action, object options = null) { action(options); return CallStream; } Pretty nice, eh? Well, yes and no. What we are doing here is to execute a sequence of actions using an interesting novel syntax. But for this to be actually useful, you’d need to build a more specialized call stream factory that comes with some sort of context (like Dusan did in JavaScript). For example, you could write the following alternate delegate signature that takes a string and returns itself: public delegate StringCallStream StringCallStream(string message); And then write the following call stream (notice the currying): public static StringCallStream CreateDumpCallStream(string dumpPath) { StringCallStream str = null; var dump = File.AppendText(dumpPath); dump.AutoFlush = true; str = s => { dump.WriteLine(s); return str; }; return str; } (I know, I’m not closing that stream; sure; bad, bad Bertrand) Finally, here’s how you use it: CallStreamFactory.CreateDumpCallStream(@".\dump.txt") ("Wow, this really works.") (DateTime.Now.ToLongTimeString()) ("And that is all."); Next step would be to combine this contextual implementation with the one that takes an action parameter and do some really fun stuff. I’m only scratching the surface here. This pattern could reveal itself to be nothing more than a gratuitous mind-bender or there could be applications that we hardly suspect at this point. In any case, it’s a fun new construct. Or is this nothing new? You tell me… Comments are open :)

  Read the article

• How to Sync Any Folder With SkyDrive on Windows 8.1

  - by Chris Hoffman

  Before Windows 8.1, it was possible to sync any folder on your computer with SkyDrive using symbolic links. This method no longer works now that SkyDrive is baked into Windows 8.1, but there are other tricks you can use. Creating a symbolic link or directory junction inside your SkyDrive folder will give you an empty folder in your SkyDrive cloud storage. Confusingly, the files will appear inside the SkyDrive Modern app as if they were being synced, but they aren’t. The Solution With SkyDrive refusing to understand and accept symbolic links in its own folder, the best option is probably to use symbolic links anyway — but in reverse. For example, let’s say you have a program that automatically saves important data to a folder anywhere on your hard drive — whether it’s C:\Users\USER\Documents\, C:\Program\Data, or anywhere else. Rather than trying to trick SkyDrive into understanding a symbolic link, we could instead move the actual folder itself to SkyDrive and then use a symbolic link at the folder’s original location to trick the original program. This may not work for every single program out there. But it will likely work for most programs, which use standard Windows API calls to access folders and save files. We’re just flipping the old solution here — we can’t trick SkyDrive anymore, so let’s try to trick other programs instead. Moving a Folder and Creating a Symbolic Link First, ensure no program is using the external folder. For example, if it’s a program data or settings folder, close the program that’s using the folder. Next, simply move the folder to your SkyDrive folder. Right-click the external folder, select Cut, go to the SkyDrive folder, right-click and select Paste. The folder will now be located in the SkyDrive folder itself, so it will sync normally. Next, open a Command Prompt window as Administrator. Right-click the Start button on the taskbar or press Windows Key + X and select Command Prompt (Administrator) to open it. Run the following command to create a symbolic link at the original location of the folder: mklink /d “C:\Original\Folder\Location” “C:\Users\NAME\SkyDrive\FOLDERNAME\” Enter the correct paths for the exact location of the original folder and the current location of the folder in your SkyDrive. Windows will then create a symbolic link at the folder’s original location. Most programs should hopefully be tricked by this symbolic location, saving their files directly to SkyDrive. You can test this yourself. Put a file into the folder at its original location. It will be saved to SkyDrive and sync normally, appearing in your SkyDrive storage online. One downside here is that you won’t be able to save a file onto SkyDrive without it taking up space on the same hard drive SkyDrive is on. You won’t be able to scatter folders across multiple hard drives and sync them all. However, you could always change the location of the SkyDrive folder on Windows 8.1 and put it on a drive with a larger amount of free space. To do this, right-click the SkyDrive folder in File Explorer, select Properties, and use the options on the Location tab. You could even use Storage Spaces to combine the drives into one larger drive. Automatically Copy the Original Files to SkyDrive Another option would be to run a program that automatically copies files from another folder on your computer to your SkyDrive folder. For example, let’s say you want to sync copies of important log files that a program creates in a specific folder. You could use a program that allows you to schedule automatic folder-mirroring, configuring the program to regularly copy the contents of your log folder to your SkyDrive folder. This may be a useful alternative for some use cases, although it isn’t the same as standard syncing. You’ll end up with two copies of the files taking up space on your system, which won’t be ideal for large files. The files also won’t be instantly uploaded to your SkyDrive storage after they’re created, but only after the scheduled task runs. There are many options for this, including Microsoft’s own SyncToy, which continues to work on Windows 8. If you were using the symbolic link trick to automatically sync copies of PC game save files with SkyDrive, you could just install GameSave Manager. It can be configured to automatically create backup copies of your computer’s PC game save files on a schedule, saving them to SkyDrive where they’ll be synced and backed up online. SkyDrive support was completely rewritten for Windows 8.1, so it’s not surprising that this trick no longer works. The ability to use symbolic links in previous versions of SkyDrive was never officially supported, so it’s not surprising to see it break after a rewrite. None of the methods above are as convenient and quick as the old symbolic link method, but they’re the best we can do with the SkyDrive integration Microsoft has given us in Windows 8.1. It’s still possible to use symbolic links to easily sync other folders with competing cloud storage services like Dropbox and Google Drive, so you may want to consider switching away from SkyDrive if this feature is critical to you.     

  Read the article

• F# for the C# Programmer

  - by mbcrump

  Are you a C# Programmer and can’t make it past a day without seeing or hearing someone mention F#?  Today, I’m going to walk you through your first F# application and give you a brief introduction to the language. Sit back this will only take about 20 minutes. Introduction Microsoft's F# programming language is a functional language for the .NET framework that was originally developed at Microsoft Research Cambridge by Don Syme. In October 2007, the senior vice president of the developer division at Microsoft announced that F# was being officially productized to become a fully supported .NET language and professional developers were hired to create a team of around ten people to build the product version. In September 2008, Microsoft released the first Community Technology Preview (CTP), an official beta release, of the F# distribution . In December 2008, Microsoft announced that the success of this CTP had encouraged them to escalate F# and it is now will now be shipped as one of the core languages in Visual Studio 2010 , alongside C++, C# 4.0 and VB. The F# programming language incorporates many state-of-the-art features from programming language research and ossifies them in an industrial strength implementation that promises to revolutionize interactive, parallel and concurrent programming. Advantages of F# F# is the world's first language to combine all of the following features: Type inference: types are inferred by the compiler and generic definitions are created automatically. Algebraic data types: a succinct way to represent trees. Pattern matching: a comprehensible and efficient way to dissect data structures. Active patterns: pattern matching over foreign data structures. Interactive sessions: as easy to use as Python and Mathematica. High performance JIT compilation to native code: as fast as C#. Rich data structures: lists and arrays built into the language with syntactic support. Functional programming: first-class functions and tail calls. Expressive static type system: finds bugs during compilation and provides machine-verified documentation. Sequence expressions: interrogate huge data sets efficiently. Asynchronous workflows: syntactic support for monadic style concurrent programming with cancellations. Industrial-strength IDE support: multithreaded debugging, and graphical throwback of inferred types and documentation. Commerce friendly design and a viable commercial market. Lets try a short program in C# then F# to understand the differences. Using C#: Create a variable and output the value to the console window: Sample Program. using System;   namespace ConsoleApplication9 {     class Program     {         static void Main(string[] args)         {             var a = 2;             Console.WriteLine(a);             Console.ReadLine();         }     } } A breeze right? 14 Lines of code. We could have condensed it a bit by removing the “using” statment and tossing the namespace. But this is the typical C# program. Using F#: Create a variable and output the value to the console window: To start, open Visual Studio 2010 or Visual Studio 2008. Note: If using VS2008, then please download the SDK first before getting started. If you are using VS2010 then you are already setup and ready to go. So, click File-> New Project –> Other Languages –> Visual F# –> Windows –> F# Application. You will get the screen below. Go ahead and enter a name and click OK. Now, you will notice that the Solution Explorer contains the following: Double click the Program.fs and enter the following information. Hit F5 and it should run successfully. Sample Program. open System let a = 2        Console.WriteLine a As Shown below: Hmm, what? F# did the same thing in 3 lines of code. Show me the interactive evaluation that I keep hearing about. The F# development environment for Visual Studio 2010 provides two different modes of execution for F# code: Batch compilation to a .NET executable or DLL. (This was accomplished above). Interactive evaluation. (Demo is below) The interactive session provides a > prompt, requires a double semicolon ;; identifier at the end of a code snippet to force evaluation, and returns the names (if any) and types of resulting definitions and values. To access the F# prompt, in VS2010 Goto View –> Other Window then F# Interactive. Once you have the interactive window type in the following expression: 2+3;; as shown in the screenshot below: I hope this guide helps you get started with the language, please check out the following books for further information. F# Books for further reading   Foundations of F# Author: Robert Pickering An introduction to functional programming with F#. Including many samples, this book walks through the features of the F# language and libraries, and covers many of the .NET Framework features which can be leveraged with F#.       Functional Programming for the Real World: With Examples in F# and C# Authors: Tomas Petricek and Jon Skeet An introduction to functional programming for existing C# developers written by Tomas Petricek and Jon Skeet. This book explains the core principles using both C# and F#, shows how to use functional ideas when designing .NET applications and presents practical examples such as design of domain specific language, development of multi-core applications and programming of reactive applications.

  Read the article

• Union,Except and Intersect operator in Linq

  - by Jalpesh P. Vadgama

  While developing a windows service using Linq-To-SQL i was in need of something that will intersect the two list and return a list with the result. After searching on net i have found three great use full operators in Linq Union,Except and Intersect. Here are explanation of each operator. Union Operator: Union operator will combine elements of both entity and return result as third new entities. Except Operator: Except operator will remove elements of first entities which elements are there in second entities and will return as third new entities. Intersect Operator: As name suggest it will return common elements of both entities and return result as new entities. Let’s take a simple console application as  a example where i have used two string array and applied the three operator one by one and print the result using Console.Writeline. Here is the code for that. C#, using GeSHi 1.0.8.6 using System; using System.Collections.Generic; using System.Linq; using System.Text;     namespace ConsoleApplication1 {     class Program     {         static void Main(string[] args)         {             string[] a = { "a", "b", "c", "d" };             string[] b = { "d","e","f","g"};               var UnResult = a.Union(b);             Console.WriteLine("Union Result");               foreach (string s in UnResult)             {                 Console.WriteLine(s);                          }               var ExResult = a.Except(b);             Console.WriteLine("Except Result");             foreach (string s in ExResult)             {                 Console.WriteLine(s);             }               var InResult = a.Intersect(b);             Console.WriteLine("Intersect Result");             foreach (string s in InResult)             {                 Console.WriteLine(s);             }             Console.ReadLine();                        }          } }   Parsed in 0.022 seconds at 45.54 KB/s Here is the output of console application as Expected. Hope this will help you.. Technorati Tags: Linq,Except,InterSect,Union,C#

  Read the article

• Web Site Performance and Assembly Versioning – Part 2 Versioning Combined Files Using Subversion

  - by capgpilk

  Ok so it took a while to post this second part. Many apologies, we had a big roll out of a new platform at work and many things had to get sidelined. So this is the second part in a short series of website performance and using versioning to help improve it. Minification and Concatination of JavaScript and CSS Files Versioning Combined Files Using Subversion – this post Versioning Combined Files Using Mercurial – published shortly In the previous post we used AjaxMin to shrink js and css files then concatenated them into one file each which had the file name of site-script.combined.min.js and site-style.combined.min.css. These file names are fine, but you can configure IIS 7 to cache these static files and so lower the amount of data transferred between server and client. This is done by editing the response headers in IIS. 1. In IIS7 Manager, choose the directory where these files are located and select HTTP Response Headers. 2. Check the Expire Web Content and set a time period well into the future. 3. When refreshing the web page, the server will respond with HTTP 304 forcing the browser to retrieve the file from its cache. 4. As can be seen in FireBug, the Cache-Control header has a max age of 31536000 seconds which equates to 365 days.   The server will always send this HTTP 304 message unless the file changes forcing it to send new content. To help force this we can change the file name based on the latest build using the SVN revision number in the filename. So we have lowered data transfer on content that hasn’t changed, but forced it to be sent when you have made a change to the css or js files. Now to get the SVN revision number in to the file name. 1. Import the MSBuildCommunityTasks targets which can be dowloaded from here. 1: <Import Project="$(MSBuildExtensionsPath) 2: \MSBuildCommunityTasks 3: \MSBuild.Community.Tasks.Targets" /> 2. Edit the BeforeBuild target to call out to svn and get the latest revision 1: <SvnVersion LocalPath="$(MSBuildProjectDirectory)" 2: ToolPath="$(ProgramFiles)\VisualSVN Server\bin"> 3: <Output TaskParameter="Revision" PropertyName="Revision" /> 4: </SvnVersion> 3. Set it to update the project AssemblyInfo.cs file for the svn revision. 1: <FileUpdate Files="Properties\AssemblyInfo.cs" 2: Regex="(\d+)\.(\d+)\.(\d+)\.(\d+)" 3: ReplacementText="$1.$2.$3.$(Revision)" /> 4. Now edit the AfterBuild target to get the full dll version. You could combine these two steps and just get the version from svn, I am working on one project that updates the AssemblyInfo file and another project that allows manual editing of the file, but needs that version within the file name; so I just combined the two for this post. 1: <MSBuild.ExtensionPack.Framework.Assembly 2: TaskAction="GetInfo" 3: NetAssembly="$(OutputPath)\mydll.dll"> 4: <Output TaskParameter="OutputItems" ItemName="Info" /> 5: </MSBuild.ExtensionPack.Framework.Assembly> 6: <Message Text="Version: %(Info.AssemblyVersion)" 7: Importance="High" /> 5. Use this Info.AssemblyVersion to write out the combined css and js files as described in the last post. 1: <WriteLinestoFile File="Scripts\site-%(Info.AssemblyVersion).combined.min.js" 2: Lines="@(JSLinesSite)" Overwrite="true" />   In the next post I will cover doing the same, but for a Mercurial repository.

  Read the article

• Registration is open - JD Edwards Summit in Dubai

  - by Hartmut Wiese

  Dear all, the registration is now open for the 2nd ECEMEA JD Edwards Summit in Dubai. The event is taking place from NOV 17-21. Please see Agenda details and registration links on those two pages:  Partner and Employee Registration Page:eventreg.oracle.com/profile/web/index.cfm?PKWebId=0x285012625 Customer Registration Page:http://eventreg.oracle.com/profile/web/index.cfm?PKWebId=0x285012625 Partner have to pay a fee and with the registration each partner confirms to do his/her payment. Only accepted method of payment is through PayPal. You will receive a separate email after registration with additional details. Prices are the following: - NOV 17-18: USD 100 per Partner registration - NOV 20-21: USD 100 per Partner and Customer registration (NOV 19 is free of charge, Partner Sponsors can register up to 4 people free of charge for the whole event) After the registration you receive an automatic workflow message which is not the registration confirmation. We first have to check the capacity and once you are approved you will receive a separate email with your registration confirmation. Normal 0 false false false EN-US X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin-top:0cm; mso-para-margin-right:0cm; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0cm; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} Speciality this year: An invitation letter can be created for Employees only. The fastest way for Customers/Partners to get a Visa is talking to your hotel or airline. This is an established process within this region Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin:0cm; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} One workshop is pretty interesting for “JDE in a box” Partner. One standard training (Introduction to Oracle Solaris V.11) was used and we have added some specific content about how to create a “JDE in a box” solution for the X3-2 / T4-1 combination. A “JDE in a box” solution is a Partner Go-to-Market solution where Oracle is helping each partners in identifying the components to use and where we also want to leverage our experiences and help our Partner to successfully combine this to a Partner offering.Target audience are Partner with no or limited Solaris/Sparc knowledge.This is the first version of this training and we all will learn from this experiences. I hope to see a lot of JDEdwards interested people in Dubai during the five days of the event.

  Read the article

• Trace File Source Adapter

  The Trace File Source adapter is a useful addition to your SSIS toolbox.  It allows you to read 2005 and 2008 profiler traces stored as .trc files and read them into the Data Flow.  From there you can perform filtering and analysis using the power of SSIS. There is no need for a SQL Server connection this just uses the trace file. Example Usages Cache warming for SQL Server Analysis Services Reading the flight recorder Find out the longest running queries on a server Analyze statements for CPU, memory by user or some other criteria you choose Properties The Trace File Source adapter has two properties, both of which combine to control the source trace file that is read at runtime. SQL Server 2005 and SQL Server 2008 trace files are supported for both the Database Engine (SQL Server) and Analysis Services. The properties are managed by the Editor form or can be set directly from the Properties Grid in Visual Studio. Property Type Description AccessMode Enumeration This property determines how the Filename property is interpreted. The values available are: DirectInput Variable Filename String This property holds the path for trace file to load (*.trc). The value is either a full path, or the name of a variable which contains the full path to the trace file, depending on the AccessMode property. Trace Column Definition Hopefully the majority of you can skip this section entirely, but if you encounter some problems processing a trace file this may explain it and allow you to fix the problem. The component is built upon the trace management API provided by Microsoft. Unfortunately API methods that expose the schema of a trace file have known issues and are unreliable, put simply the data often differs from what was specified. To overcome these limitations the component uses  some simple XML files. These files enable the trace column data types and sizing attributes to be overridden. For example SQL Server Profiler or TMO generated structures define EventClass as an integer, but the real value is a string. TraceDataColumnsSQL.xml  - SQL Server Database Engine Trace Columns TraceDataColumnsAS.xml    - SQL Server Analysis Services Trace Columns The files can be found in the %ProgramFiles%\Microsoft SQL Server\100\DTS\PipelineComponents folder, e.g. "C:\Program Files\Microsoft SQL Server\100\DTS\PipelineComponents\TraceDataColumnsSQL.xml" "C:\Program Files\Microsoft SQL Server\100\DTS\PipelineComponents\TraceDataColumnsAS.xml" If at runtime the component encounters a type conversion or sizing error it is most likely due to a discrepancy between the column definition as reported by the API and the actual value encountered. Whilst most common issues have already been fixed through these files we have implemented specific exception traps to direct you to the files to enable you to fix any further issues due to different usage or data scenarios that we have not tested. An example error that you can fix through these files is shown below. Buffer exception writing value to column 'Column Name'. The string value is 999 characters in length, the column is only 111. Columns can be overridden by the TraceDataColumns XML files in "C:\Program Files\Microsoft SQL Server\100\DTS\PipelineComponents\TraceDataColumnsAS.xml". Installation The component is provided as an MSI file which you can download and run to install it. This simply places the files on disk in the correct locations and also installs the assemblies in the Global Assembly Cache as per Microsoft’s recommendations. You may need to restart the SQL Server Integration Services service, as this caches information about what components are installed, as well as restarting any open instances of Business Intelligence Development Studio (BIDS) / Visual Studio that you may be using to build your SSIS packages. Finally you will have to add the transformation to the Visual Studio toolbox manually. Right-click the toolbox, and select Choose Items.... Select the SSIS Data Flow Items tab, and then check the Trace File Source transformation in the Choose Toolbox Items window. This process has been described in detail in the related FAQ entry for How do I install a task or transform component? We recommend you follow best practice and apply the current Microsoft SQL Server Service pack to your SQL Server servers and workstations. Please note that the Microsoft Trace classes used in the component are not supported on 64-bit platforms. To use the Trace File Source on a 64-bit host you need to ensure you have the 32-bit (x86) tools available, and the way you execute your package is setup to use them, please see the help topic 64-bit Considerations for Integration Services for more details. Downloads Trace Sources for SQL Server 2005 -- Trace Sources for SQL Server 2008 Version History SQL Server 2008 Version 2.0.0.382 - SQL Sever 2008 public release. (9 Apr 2009) SQL Server 2005 Version 1.0.0.321 - SQL Server 2005 public release. (18 Nov 2008) -- Screenshots

  Read the article

• Streaming desktop with avconv - severe sound issues

  - by Tommy Brunn

  I'm trying to do some live streaming in Ubuntu 12.10, but I'm having some problems with audio. More specifically, the quality is complete garbage and it's at least 10 seconds out of sync with the video. I'm using an excellent guide found here to set up my loopback devices so that I can combine the desktop audio with the microphone input. It seems to work, as I'm able to stream both audio and video to Twitch.tv. But, as I said, the audio quality is terrible. The microphone audio is very, very low, but if I increase it, I get a horrible garbled sound that is absolutely unbearable. Nothing like that is present during VoIP calls or when recording sound alone with the sound recorder, so it's not an issue with the microphone itself. The entire audio stream is also delayed about 10-15 seconds compared to the video stream. I put together an imgur album of my settings. Here is some example output from when I'm streaming: avconv version 0.8.4-6:0.8.4-0ubuntu0.12.10.1, Copyright (c) 2000-2012 the Libav developers built on Nov 6 2012 16:51:11 with gcc 4.7.2 [x11grab @ 0x162fd80] device: :0.0+570,262 -> display: :0.0 x: 570 y: 262 width: 1280 height: 720 [x11grab @ 0x162fd80] shared memory extension found [x11grab @ 0x162fd80] Estimating duration from bitrate, this may be inaccurate Input #0, x11grab, from ':0.0+570,262': Duration: N/A, start: 1353181686.735113, bitrate: 884736 kb/s Stream #0.0: Video: rawvideo, bgra, 1280x720, 884736 kb/s, 30 tbr, 1000k tbn, 30 tbc [alsa @ 0x163fce0] capture with some ALSA plugins, especially dsnoop, may hang. [alsa @ 0x163fce0] Estimating duration from bitrate, this may be inaccurate Input #1, alsa, from 'pulse': Duration: N/A, start: 1353181686.773841, bitrate: N/A Stream #1.0: Audio: pcm_s16le, 48000 Hz, 2 channels, s16, 1536 kb/s Incompatible pixel format 'bgra' for codec 'libx264', auto-selecting format 'yuv420p' [buffer @ 0x1641ec0] w:1280 h:720 pixfmt:bgra [scale @ 0x1642480] w:1280 h:720 fmt:bgra -> w:852 h:480 fmt:yuv420p flags:0x4 [libx264 @ 0x165ae80] VBV maxrate unspecified, assuming CBR [libx264 @ 0x165ae80] using cpu capabilities: MMX2 SSE2Fast SSSE3 FastShuffle SSE4.2 [libx264 @ 0x165ae80] profile Main, level 3.1 [libx264 @ 0x165ae80] 264 - core 123 r2189 35cf912 - H.264/MPEG-4 AVC codec - Copyleft 2003-2012 - http://www.videolan.org/x264.html - options: cabac=1 ref=2 deblock=1:0:0 analyse=0x1:0x111 me=hex subme=6 psy=1 psy_rd=1.00:0.00 mixed_ref=0 me_range=16 chroma_me=1 trellis=1 8x8dct=0 cqm=0 deadzone=21,11 fast_pskip=1 chroma_qp_offset=-2 threads=4 sliced_threads=0 nr=0 decimate=1 interlaced=0 bluray_compat=0 constrained_intra=0 bframes=3 b_pyramid=0 b_adapt=1 b_bias=0 direct=1 weightb=0 open_gop=1 weightp=1 keyint=250 keyint_min=25 scenecut=40 intra_refresh=0 rc_lookahead=30 rc=cbr mbtree=1 bitrate=712 ratetol=1.0 qcomp=0.60 qpmin=0 qpmax=69 qpstep=4 vbv_maxrate=712 vbv_bufsize=512 nal_hrd=none ip_ratio=1.25 aq=1:1.00 Output #0, flv, to 'rtmp://live.justin.tv/app/live_23011330_Pt1plSRM0z5WVNJ0QmCHvTPmpUnfC4': Metadata: encoder : Lavf53.21.0 Stream #0.0: Video: libx264, yuv420p, 852x480, q=-1--1, 712 kb/s, 1k tbn, 30 tbc Stream #0.1: Audio: libmp3lame, 44100 Hz, 2 channels, s16, 712 kb/s Stream mapping: Stream #0:0 -> #0:0 (rawvideo -> libx264) Stream #1:0 -> #0:1 (pcm_s16le -> libmp3lame) Press ctrl-c to stop encoding frame= 17 fps= 0 q=0.0 size= 0kB time=10000000000.00 bitrate= 0.0kbitframe= 32 fps= 31 q=0.0 size= 0kB time=10000000000.00 bitrate= 0.0kbitframe= 40 fps= 23 q=29.0 size= 44kB time=0.03 bitrate=13786.2kbits/s dup=frame= 47 fps= 21 q=31.0 size= 93kB time=2.73 bitrate= 277.7kbits/s dup=0frame= 62 fps= 23 q=29.0 size= 160kB time=3.23 bitrate= 406.2kbits/s dup=0frame= 77 fps= 24 q=23.0 size= 209kB time=3.71 bitrate= 462.5kbits/s dup=0frame= 92 fps= 25 q=20.0 size= 267kB time=4.91 bitrate= 445.2kbits/s dup=0frame= 107 fps= 25 q=20.0 size= 318kB time=5.41 bitrate= 482.1kbits/s dup=0frame= 123 fps= 26 q=18.0 size= 368kB time=5.96 bitrate= 505.7kbits/s dup=0frame= 139 fps= 26 q=16.0 size= 419kB time=6.48 bitrate= 529.7kbits/s dup=0frame= 155 fps= 27 q=15.0 size= 473kB time=7.00 bitrate= 553.6kbits/s dup=0frame= 170 fps= 27 q=14.0 size= 525kB time=7.52 bitrate= 571.7kbits/s dup=0 frame= 180 fps= 25 q=-1.0 Lsize= 652kB time=7.97 bitrate= 670.0kbits/s dup=0 drop=32 //Here I stop the streaming video:531kB audio:112kB global headers:0kB muxing overhead 1.345945% [libx264 @ 0x165ae80] frame I:1 Avg QP:30.43 size: 39748 [libx264 @ 0x165ae80] frame P:45 Avg QP:11.37 size: 11110 [libx264 @ 0x165ae80] frame B:134 Avg QP:15.93 size: 27 [libx264 @ 0x165ae80] consecutive B-frames: 0.6% 0.0% 1.7% 97.8% [libx264 @ 0x165ae80] mb I I16..4: 7.3% 0.0% 92.7% [libx264 @ 0x165ae80] mb P I16..4: 0.1% 0.0% 0.1% P16..4: 49.1% 1.2% 2.1% 0.0% 0.0% skip:47.4% [libx264 @ 0x165ae80] mb B I16..4: 0.0% 0.0% 0.0% B16..8: 0.1% 0.0% 0.0% direct: 0.0% skip:99.9% L0:42.5% L1:56.9% BI: 0.6% [libx264 @ 0x165ae80] coded y,uvDC,uvAC intra: 82.3% 87.4% 71.9% inter: 7.1% 8.4% 7.0% [libx264 @ 0x165ae80] i16 v,h,dc,p: 27% 29% 16% 28% [libx264 @ 0x165ae80] i4 v,h,dc,ddl,ddr,vr,hd,vl,hu: 22% 21% 14% 8% 8% 8% 7% 5% 7% [libx264 @ 0x165ae80] i8c dc,h,v,p: 47% 22% 20% 11% [libx264 @ 0x165ae80] Weighted P-Frames: Y:0.0% UV:0.0% [libx264 @ 0x165ae80] ref P L0: 96.4% 3.6% [libx264 @ 0x165ae80] kb/s:474.19 Received signal 2: terminating. Any ideas on how I can resolve this? The video delay is perfectly acceptable, so I wouldn't think that it's a network issue that's causing the delay in the audio. Any help would be appreciated.

  Read the article

• BIP and Mapviewer Mash Up I

  - by Tim Dexter

  I was out in Yellowstone last week soaking up various wildlife and a bit too much rain ... good to be back until the 95F heat yesterday. Taking a little break from the Excel templates; the dev folks are planing an Excel patch in the next week or so that will add a mass of new functionality. At the risk of completely mis leading you I'm going to hang back a while. What I have written so far holds true and will continue to do so. This week, I have been mostly eating 'mapviewer' ... answers on a post card please, TV show and character. I had a request to show how BIP can call mapviewer and render a dynamic map in an output. So I hit the books and colleagues for some answers. Mapviewer is Oracle's geographic information system, hereby known as GIS. I use it a lot in our BIEE demos where the interaction with the maps is very impressive. Need a map of California and its congressional districts? I have contacts; Jerry and David with their little black box of maps. Once in my possession I can build highly interactive, clickable maps that allow the user to drill into more information using a very friendly interface driving BIEE content and navigation. But what about maps in BIP output? Bryan Wise, who has written some articles on this blog did some work a while back with the PL/SQL API interface. The extract for the report called a function that in turn called the mapviewer server, passing a set of mapping requirements, it then returned a URL to a cached copy of that map. Easy to then have BIP render that image. Thats still very doable. You need to install a couple of packages and then load the mapviewer java APIs into the database. Then you can write your function to the APIs. A little involved? Maybe, but the database is doing all the heavy lifting for you. I thought I would investigate another method for getting the maps back into BIP. There is a URL interface you can call, this involves building an XML message to be passed to the mapviewer server. It's pretty straightforward to use on the mapviewer side. On the BIP side things are little more tricksy. After some unexpected messing about I finally got the ubiquitous Hello World map to render using the URL method. Not the most exciting map in the world, lots of ocean and a rather long URL to get it to render. http://127.0.0.1:9704/mapviewer/omserver?xml_request=%3Cmap_request%20title=%22Hello%20World%22%20datasource=%22cagis%22%20format=%22GIF_STREAM%22/%3E Notice all of the encoding in the URL string to handle the spaces, quotes, etc. All necessary to get BIP to make the call to the mapviewer server correctly without truncating the URL if it hits a real space rather than a %20. With that in mind constructing the URL was pretty simple. I'm not going to get into the content of the URL too much, for that you need to bone up on the mapviewer XML API. Check out the home page here and the documentation here. To make the template portable I used the standard CURRENT_SERVER_URL parameter from the BIP server and declared that in my template. <?param@begin:CURRENT_SERVER_URL;'myserver'?> Ignore the 'myserver', that was just a dummy value for testing at runtime it will resolve to: 'http://yourserver:port/xmlpserver' Not quite what we need as mapviewer has its own server path, in my case I needed 'mapviewer/omserver?xml_request=' as the fixed path to the mapviewer request URL. A little concatenation and substringing later I came up with <?param@begin:mURL;concat(substring($CURRENT_SERVER_URL,1,22),'mapviewer/omserver?xml_request=')?> Thats the basic URL that I can then build on. To get the Hello World map I need to add the following: <map_request title="Hello World" datasource="cagis" format="GIF_STREAM"/> Those angle brackets were the source of my headache, BIPs XSLT engine was attempting to process them rather than just pass them. Hok Min to the rescue ... again. I owe him lunch when I get out to HQ again! To solve the problem, I needed to escape all the characters and white space and then use native XSL to assign the string to a parameter. <xsl:param xdofo:ctx="begin"name="pXML">%3Cmap_request%20title=%22Hello%20World%22 %20datasource=%22cagis%22%20format=%22GIF_STREAM%22/%3E</xsl:param> I did not need to assign it to a parameter but I felt that if I were going to do anything more serious than Hello World like plotting points of interest on the map. I would need to dynamically build the URL, so using a set of parameters or variables that I then concatenated would be easier. Now I had the initial server string and the request all I then did was combine the two using a concat: concat($mURL,$pXML) Embedding that into an image tag: <fo:external-graphic src="url({concat($mURL,$pXML)})"/> and I was done. Notice the curly braces to get the concat evaluated prior to the image call. As you will see next time, building the XML message to go onto the URL can get quite complex but I have used it with some data. Ultimately, it would be easier to build an extension to BIP to handle the data to be plotted, it would then build the XML message, call mapviewer and return a URL to the map image for BIP to render. More on that next time ...

  Read the article

• Populate a WCF syndication podcast using MP3 ID3 metadata tags

  - by brian_ritchie

  In the last post, I showed how to create a podcast using WCF syndication.  A podcast is an RSS feed containing a list of audio files to which users can subscribe.  The podcast not only contains links to the audio files, but also metadata about each episode.  A cool approach to building the feed is reading this metadata from the ID3 tags on the MP3 files used for the podcast. One library to do this is TagLib-Sharp.  Here is some sample code: .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: Consolas, "Courier New", Courier, Monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } 1: var taggedFile = TagLib.File.Create(f); 2: var fileInfo = new FileInfo(f); 3: var item = new iTunesPodcastItem() 4: { 5: title = taggedFile.Tag.Title, 6: size = fileInfo.Length, 7: url = feed.baseUrl + fileInfo.Name, 8: duration = taggedFile.Properties.Duration, 9: mediaType = feed.mediaType, 10: summary = taggedFile.Tag.Comment, 11: subTitle = taggedFile.Tag.FirstAlbumArtist, 12: id = fileInfo.Name 13: }; 14: if (!string.IsNullOrEmpty(taggedFile.Tag.Album)) 15: item.publishedDate = DateTimeOffset.Parse(taggedFile.Tag.Album); This reads the ID3 tags into an object for later use in creating the syndication feed.  When the MP3 is created, these tags are set...or they can be set after the fact using the Properties dialog in Windows Explorer.  The only "hack" is that there isn't an easily accessible tag for "subtitle" or "published date" so I used other tags in this example. Feel free to change this to meet your purposes.  You could remove the subtitle & use the file modified data for example. That takes care of the episodes, for the feed level settings we'll load those from an XML file: .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: Consolas, "Courier New", Courier, Monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } 1: <?xml version="1.0" encoding="utf-8" ?> 2: <iTunesPodcastFeed 3: baseUrl ="" 4: title="" 5: subTitle="" 6: description="" 7: copyright="" 8: category="" 9: ownerName="" 10: ownerEmail="" 11: mediaType="audio/mp3" 12: mediaFiles="*.mp3" 13: imageUrl="" 14: link="" 15: /> Here is the full code put together. Read the feed XML file and deserialize it into an iTunesPodcastFeed classLoop over the files in a directory reading the ID3 tags from the audio files .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: Consolas, "Courier New", Courier, Monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } 1: public static iTunesPodcastFeed CreateFeedFromFiles(string podcastDirectory, string podcastFeedFile) 2: { 3: XmlSerializer serializer = new XmlSerializer(typeof(iTunesPodcastFeed)); 4: iTunesPodcastFeed feed; 5: using (var fs = File.OpenRead(Path.Combine(podcastDirectory, podcastFeedFile))) 6: { 7: feed = (iTunesPodcastFeed)serializer.Deserialize(fs); 8: } 9: foreach (var f in Directory.GetFiles(podcastDirectory, feed.mediaFiles)) 10: { 11: try 12: { 13: var taggedFile = TagLib.File.Create(f); 14: var fileInfo = new FileInfo(f); 15: var item = new iTunesPodcastItem() 16: { 17: title = taggedFile.Tag.Title, 18: size = fileInfo.Length, 19: url = feed.baseUrl + fileInfo.Name, 20: duration = taggedFile.Properties.Duration, 21: mediaType = feed.mediaType, 22: summary = taggedFile.Tag.Comment, 23: subTitle = taggedFile.Tag.FirstAlbumArtist, 24: id = fileInfo.Name 25: }; 26: if (!string.IsNullOrEmpty(taggedFile.Tag.Album)) 27: item.publishedDate = DateTimeOffset.Parse(taggedFile.Tag.Album); 28: feed.Items.Add(item); 29: } 30: catch 31: { 32: // ignore files that can't be accessed successfully 33: } 34: } 35: return feed; 36: } Usually putting a "try...catch" like this is bad, but in this case I'm just skipping over files that are locked while they are being uploaded to the web site.Here is the code from the last couple of posts.  

  Read the article

• How to structure game states in an entity/component-based system

  - by Eva

  I'm making a game designed with the entity-component paradigm that uses systems to communicate between components as explained here. I've reached the point in my development that I need to add game states (such as paused, playing, level start, round start, game over, etc.), but I'm not sure how to do it with my framework. I've looked at this code example on game states which everyone seems to reference, but I don't think it fits with my framework. It seems to have each state handling its own drawing and updating. My framework has a SystemManager that handles all the updating using systems. For example, here's my RenderingSystem class: public class RenderingSystem extends GameSystem { private GameView gameView_; /** * Constructor * Creates a new RenderingSystem. * @param gameManager The game manager. Used to get the game components. */ public RenderingSystem(GameManager gameManager) { super(gameManager); } /** * Method: registerGameView * Registers gameView into the RenderingSystem. * @param gameView The game view registered. */ public void registerGameView(GameView gameView) { gameView_ = gameView; } /** * Method: triggerRender * Adds a repaint call to the event queue for the dirty rectangle. */ public void triggerRender() { Rectangle dirtyRect = new Rectangle(); for (GameObject object : getRenderableObjects()) { GraphicsComponent graphicsComponent = object.getComponent(GraphicsComponent.class); dirtyRect.add(graphicsComponent.getDirtyRect()); } gameView_.repaint(dirtyRect); } /** * Method: renderGameView * Renders the game objects onto the game view. * @param g The graphics object that draws the game objects. */ public void renderGameView(Graphics g) { for (GameObject object : getRenderableObjects()) { GraphicsComponent graphicsComponent = object.getComponent(GraphicsComponent.class); if (!graphicsComponent.isVisible()) continue; GraphicsComponent.Shape shape = graphicsComponent.getShape(); BoundsComponent boundsComponent = object.getComponent(BoundsComponent.class); Rectangle bounds = boundsComponent.getBounds(); g.setColor(graphicsComponent.getColor()); if (shape == GraphicsComponent.Shape.RECTANGULAR) { g.fill3DRect(bounds.x, bounds.y, bounds.width, bounds.height, true); } else if (shape == GraphicsComponent.Shape.CIRCULAR) { g.fillOval(bounds.x, bounds.y, bounds.width, bounds.height); } } } /** * Method: getRenderableObjects * @return The renderable game objects. */ private HashSet<GameObject> getRenderableObjects() { return gameManager.getGameObjectManager().getRelevantObjects( getClass()); } } Also all the updating in my game is event-driven. I don't have a loop like theirs that simply updates everything at the same time. I like my framework because it makes it easy to add new GameObjects, but doesn't have the problems some component-based designs encounter when communicating between components. I would hate to chuck it just to get pause to work. Is there a way I can add game states to my game without removing the entity-component design? Does the game state example actually fit my framework, and I'm just missing something? EDIT: I might not have explained my framework well enough. My components are just data. If I was coding in C++, they'd probably be structs. Here's an example of one: public class BoundsComponent implements GameComponent { /** * The position of the game object. */ private Point pos_; /** * The size of the game object. */ private Dimension size_; /** * Constructor * Creates a new BoundsComponent for a game object with initial position * initialPos and initial size initialSize. The position and size combine * to make up the bounds. * @param initialPos The initial position of the game object. * @param initialSize The initial size of the game object. */ public BoundsComponent(Point initialPos, Dimension initialSize) { pos_ = initialPos; size_ = initialSize; } /** * Method: getBounds * @return The bounds of the game object. */ public Rectangle getBounds() { return new Rectangle(pos_, size_); } /** * Method: setPos * Sets the position of the game object to newPos. * @param newPos The value to which the position of the game object is * set. */ public void setPos(Point newPos) { pos_ = newPos; } } My components do not communicate with each other. Systems handle inter-component communication. My systems also do not communicate with each other. They have separate functionality and can easily be kept separate. The MovementSystem doesn't need to know what the RenderingSystem is rendering to move the game objects correctly; it just need to set the right values on the components, so that when the RenderingSystem renders the game objects, it has accurate data. The game state could not be a system, because it needs to interact with the systems rather than the components. It's not setting data; it's determining which functions need to be called. A GameStateComponent wouldn't make sense because all the game objects share one game state. Components are what make up objects and each one is different for each different object. For example, the game objects cannot have the same bounds. They can have overlapping bounds, but if they share a BoundsComponent, they're really the same object. Hopefully, this explanation makes my framework less confusing.

  Read the article

• How to get paid and figure out if I want to keep this client [migrated]

  - by Heiner Fawkes

  I have a client who is not paying on time, but it looks like the specifics don't match similar questions on this SE site. I got a call from a client I did website work for years ago. I had not done this kind of work for many years and frankly I'm not sure I want to now, but nevertheless about a month ago I agreed to bring his website, SEO, social media, and overall marketing for his small business up to speed. Why? He has told me many times how I'm the most honest, most well-informed contractor he's had experience with. And I personally kind of like him too. So I started working on an hourly basis. I sent one very small invoice and got paid. Then we talked a whole lot about all sorts of feature he would like me to implement. I started that work, and sent a second invoice on the first of the month (one of my two stated billing days). I didn't get paid. On every invoice it states that I charge a whopping ten percent per week late. I sent many voicemails and emails asking to please let me know what's going on with payment, and didn't get replies. Then the 15th of the month rolled around (which I stated initially as one of my invoicing dates). Since I hadn't been paid for the last invoice, I simply didn't send him an invoice at that time but emailed him and said that I will combine it with the next scheduled invoice for this reason (probably a bad idea I realize). Eventually he sent a portion of the invoice payment. I emailed back to let him know that he's three weeks late and what the remaining balance is. Finally we got in touch via phone. He basically told me that he thought I hadn't done all of the work I said I did. He looked at the page source code and it didn't look complete to him. I explained why his perception would be different and what work I had done as specified. He accepted this and said that part of the reason he didn't pay in full is that he's been swamped with personal family stuff, and part of the reason is that he didn't think I did all the work. That struck me as pretty weird. He also expressed concern that he has no idea now how much all the changes he has asked for are going to cost. And once again, he told me how honest and high-quality my services are compared to others he has dealt with. He also said he would pay me more (but not all) of the now three weeks overdue invoice that day. I didn't receive any payment. Basically this is how the client relationship strikes me: He's not good at communication. He's very busy and English isn't his first language. He almost never replies to emails but phone calls are fine. He's asked me to avoid emails for communication and I've asked him to please use email. He might not have enough money to afford all the things he has asked for. But so far I have been working for an hourly fee (which is quite high). He also has started paying monthly for hosting and social media services from me. What seems very abnormal is for a client to be so overdue on payments and to actually withhold payment of an invoice without any communication because he didn't think the work was done. I told him that I will send dollar estimates of each module of remaining work so that we can decide which ones are the highest priority if he cannot afford them all. I also reiterated that in the future if he has doubts about the work or an inability to pay, he must contact me immediately to say so. I basically plan to state the following to him: I would like to work for him and help his business. I also have sympathy for his recent family difficulties. I am happy to figure out payment plans that would work better for him, but first I need to be paid in full for all outstanding invoices, especially given that I skipped one of them just to be nice. The most crucial thing I need is communication about any problems with my work or his ability to pay. Once again, he heeds to pay in full immediately before we negotiate anything else. Does the above seem like an appropriate communication? Is anything missing from it? Is anything I'm doing here really abnormal?

  Read the article

• Need help with testdisk output

  - by dan

  I had (note the past tense) an ubuntu 12.04 system with separate partitions for the base and /home directories. It started acting wonky, so I decided to do a reinstall with 12.10, intending just to do a reinstall to the base partition. After several seconds, I realize that the installer was repartitioning the drive and reinstalling, so I pulled the power cord. I'm now trying to recover as much as I can with testdisk, but it seems that testdisk is finding 100 unique partitions when I run it - they mostly tend to be HFS+ or solaris /home (which I think is just an ext4; I've never had solaris on the machine). I've pasted an abbreviated version of the testdisk output below (first ~100 lines, and then ~100 lines from the middle of the output). Is there a way to combine or recreate the partitions and then data recovery, or some other way maximize what I can recover (ideally as much of the file system as possible)? I really only care about what was in the /home directory - I'd rather not use photorec since I don't have another 2 TB HD lying around to recover to. Thanks, Dan Mon Dec 10 06:03:00 2012 Command line: TestDisk TestDisk 6.13, Data Recovery Utility, November 2011 Christophe GRENIER <[email protected]> http://www.cgsecurity.org OS: Linux, kernel 3.2.34-std312-amd64 (#2 SMP Sat Nov 17 08:06:32 UTC 2012) x86_64 Compiler: GCC 4.4 Compilation date: 2012-11-27T22:44:52 ext2fs lib: 1.42.6, ntfs lib: libntfs-3g, reiserfs lib: 0.3.1-rc8, ewf lib: none /dev/sda: LBA, HPA, LBA48, DCO support /dev/sda: size 3907029168 sectors /dev/sda: user_max 3907029168 sectors /dev/sda: native_max 3907029168 sectors Warning: can't get size for Disk /dev/mapper/control - 0 B - CHS 1 1 1, sector size=512 /dev/sr0 is not an ATA disk Hard disk list Disk /dev/sda - 2000 GB / 1863 GiB - CHS 243201 255 63, sector size=512 - WDC WD20EARS-00J2GB0, S/N:WD-WCAYY0075071, FW:80.00A80 Disk /dev/sdb - 1013 MB / 967 MiB - CHS 1014 32 61, sector size=512 - Generic Flash Disk, FW:8.07 Disk /dev/sr0 - 367 MB / 350 MiB - CHS 179470 1 1 (RO), sector size=2048 - PLDS DVD+/-RW DH-16AAS, FW:JD12 Partition table type (auto): Intel Disk /dev/sda - 2000 GB / 1863 GiB - WDC WD20EARS-00J2GB0 Partition table type: EFI GPT Analyse Disk /dev/sda - 2000 GB / 1863 GiB - CHS 243201 255 63 Current partition structure: Bad GPT partition, invalid signature. search_part() Disk /dev/sda - 2000 GB / 1863 GiB - CHS 243201 255 63 recover_EXT2: s_block_group_nr=0/14880, s_mnt_count=5/4294967295, s_blocks_per_group=32768, s_inodes_per_group=8192 recover_EXT2: s_blocksize=4096 recover_EXT2: s_blocks_count 487593984 recover_EXT2: part_size 3900751872 MS Data 2048 3900753919 3900751872 EXT4 Large file Sparse superblock, 1997 GB / 1860 GiB Linux Swap 3900755968 3907028975 6273008 SWAP2 version 1, 3211 MB / 3062 MiB Results P MS Data 2048 3900753919 3900751872 EXT4 Large file Sparse superblock, 1997 GB / 1860 GiB P Linux Swap 3900755968 3907028975 6273008 SWAP2 version 1, 3211 MB / 3062 MiB interface_write() 1 P MS Data 2048 3900753919 3900751872 2 P Linux Swap 3900755968 3907028975 6273008 search_part() Disk /dev/sda - 2000 GB / 1863 GiB - CHS 243201 255 63 recover_EXT2: s_block_group_nr=0/14880, s_mnt_count=5/4294967295, s_blocks_per_group=32768, s_inodes_per_group=8192 recover_EXT2: s_blocksize=4096 recover_EXT2: s_blocks_count 487593984 recover_EXT2: part_size 3900751872 MS Data 2048 3900753919 3900751872 EXT4 Large file Sparse superblock, 1997 GB / 1860 GiB block_group_nr 1 recover_EXT2: "e2fsck -b 32768 -B 4096 device" may be needed recover_EXT2: s_block_group_nr=1/14880, s_mnt_count=0/4294967295, s_blocks_per_group=32768, s_inodes_per_group=8192 recover_EXT2: s_blocksize=4096 recover_EXT2: s_blocks_count 487593984 recover_EXT2: part_size 3900751872 MS Data 2046 3900753917 3900751872 EXT4 Large file Sparse superblock Backup superblock, 1997 GB / 1860 GiB block_group_nr 1 recover_EXT2: "e2fsck -b 32768 -B 4096 device" may be needed recover_EXT2: s_block_group_nr=1/14880, s_mnt_count=0/4294967295, s_blocks_per_group=32768, s_inodes_per_group=8192 recover_EXT2: s_blocksize=4096 recover_EXT2: s_blocks_count 487593984 recover_EXT2: part_size 3900751872 MS Data 2048 3900753919 3900751872 EXT4 Large file Sparse superblock Backup superblock, 1997 GB / 1860 GiB block_group_nr 1 recover_EXT2: "e2fsck -b 32768 -B 4096 device" may be needed recover_EXT2: s_block_group_nr=1/14584, s_mnt_count=0/27, s_blocks_per_group=32768, s_inodes_per_group=8192 recover_EXT2: s_blocksize=4096 recover_EXT2: s_blocks_count 477915164 recover_EXT2: part_size 3823321312 MS Data 4094 3823325405 3823321312 EXT4 Large file Sparse superblock Backup superblock, 1957 GB / 1823 GiB block_group_nr 1 ....snip...... MS Data 2046 3900753917 3900751872 EXT4 Large file Sparse superblock Backup superblock, 1997 GB / 1860 GiB MS Data 2048 3900753919 3900751872 EXT4 Large file Sparse superblock, 1997 GB / 1860 GiB MS Data 4094 3823325405 3823321312 EXT4 Large file Sparse superblock Backup superblock, 1957 GB / 1823 GiB MS Data 4096 3823325407 3823321312 EXT4 Large file Sparse superblock Backup superblock, 1957 GB / 1823 GiB MS Data 7028840 7033383 4544 FAT12, 2326 KB / 2272 KiB Mac HFS 67856948 67862179 5232 HFS+ found using backup sector!, 2678 KB / 2616 KiB Mac HFS 67862176 67867407 5232 HFS+, 2678 KB / 2616 KiB Mac HFS 67862244 67867475 5232 HFS+ found using backup sector!, 2678 KB / 2616 KiB Mac HFS 67867404 67872635 5232 HFS+, 2678 KB / 2616 KiB Mac HFS 67867472 67872703 5232 HFS+, 2678 KB / 2616 KiB Mac HFS 67872700 67877931 5232 HFS+, 2678 KB / 2616 KiB Mac HFS 67937834 67948067 10234 [EasyInstall_OSX] HFS found using backup sector!, 5239 KB / 5117 KiB Mac HFS 67938012 67948155 10144 HFS+ found using backup sector!, 5193 KB / 5072 KiB Mac HFS 67948064 67958297 10234 [EasyInstall_OSX] HFS, 5239 KB / 5117 KiB Mac HFS 67948070 67958303 10234 [EasyInstall_OSX] HFS found using backup sector!, 5239 KB / 5117 KiB Mac HFS 67948152 67958295 10144 HFS+, 5193 KB / 5072 KiB Mac HFS 67958292 67968435 10144 HFS+, 5193 KB / 5072 KiB Mac HFS 67958300 67968533 10234 [EasyInstall_OSX] HFS, 5239 KB / 5117 KiB Mac HFS 67992596 67997827 5232 HFS+ found using backup sector!, 2678 KB / 2616 KiB Mac HFS 67997824 68003055 5232 HFS+, 2678 KB / 2616 KiB Mac HFS 67997892 68003123 5232 HFS+ found using backup sector!, 2678 KB / 2616 KiB Mac HFS 68003052 68008283 5232 HFS+, 2678 KB / 2616 KiB Mac HFS 68003120 68008351 5232 HFS+, 2678 KB / 2616 KiB Mac HFS 68008348 68013579 5232 HFS+, 2678 KB / 2616 KiB Solaris /home 84429840 123499141 39069302 UFS1, 20 GB / 18 GiB Solaris /home 84429952 123499253 39069302 UFS1, 20 GB / 18 GiB Solaris /home 84493136 123562437 39069302 UFS1, 20 GB / 18 GiB Solaris /home 84493248 123562549 39069302 UFS1, 20 GB / 18 GiB Solaris /home 84566088 123635389 39069302 UFS1, 20 GB / 18 GiB Solaris /home 84566200 123635501 39069302 UFS1, 20 GB / 18 GiB Solaris /home 84571232 123640533 39069302 UFS1, 20 GB / 18 GiB Solaris /home 84571344 123640645 39069302 UFS1, 20 GB / 18 GiB Solaris /home 84659952 123729253 39069302 UFS1, 20 GB / 18 GiB Solaris /home 84660064 123729365 39069302 UFS1, 20 GB / 18 GiB Solaris /home 84690504 123759805 39069302 UFS1, 20 GB / 18 GiB Solaris /home 84690616 123759917 39069302 UFS1, 20 GB / 18 GiB Solaris /home 84700424 123769725 39069302 UFS1, 20 GB / 18 GiB Solaris /home 84700536 123769837 39069302 UFS1, 20 GB / 18 GiB Solaris /home 84797720 123867021 39069302 UFS1, 20 GB / 18 GiB Solaris /home 84797832 123867133 39069302 UFS1, 20 GB / 18 GiB Solaris /home 84812544 123881845 39069302 UFS1, 20 GB / 18 GiB Solaris /home 84812656 123881957 39069302 UFS1, 20 GB / 18 GiB Solaris /home 84824552 123893853 39069302 UFS1, 20 GB / 18 GiB Solaris /home 84824664 123893965 39069302 UFS1, 20 GB / 18 GiB Solaris /home 84847528 123916829 39069302 UFS1, 20 GB / 18 GiB Solaris /home 84847640 123916941 39069302 UFS1, 20 GB / 18 GiB Solaris /home 84886840 123956141 39069302 UFS1, 20 GB / 18 GiB Solaris /home 84886952 123956253 39069302 UFS1, 20 GB / 18 GiB Solaris /home 84945488 124014789 39069302 UFS1, 20 GB / 18 GiB Solaris /home 84945600 124014901 39069302 UFS1, 20 GB / 18 GiB Solaris /home 84957992 124027293 39069302 UFS1, 20 GB / 18 GiB Solaris /home 84958104 124027405 39069302 UFS1, 20 GB / 18 GiB Solaris /home 84962240 124031541 39069302 UFS1, 20 GB / 18 GiB Solaris /home 84962352 124031653 39069302 UFS1, 20 GB / 18 GiB Solaris /home 84977168 124046469 39069302 UFS1, 20 GB / 18 GiB Solaris /home 84977280 124046581 39069302 UFS1, 20 GB / 18 GiB MS Data 174395467 178483851 4088385 ..... snip (it keeps going on for quite a while)

  Read the article

• Declarative Architectures in Infrastructure as a Service (IaaS)

  - by BuckWoody

  I deal with computing architectures by first laying out requirements, and then laying in any constraints for it's success. Only then do I bring in computing elements to apply to the system. As an example, a requirement might be "world-side availability" and a constraint might be "with less than 80ms response time and full HA" or something similar. Then I can choose from the best fit of technologies which range from full-up on-premises computing to IaaS, PaaS or SaaS. I also deal in abstraction layers - on-premises systems are fully under your control, in IaaS the hardware is abstracted (but not the OS, scale, runtimes and so on), in PaaS the hardware and the OS is abstracted and you focus on code and data only, and in SaaS everything is abstracted - you merely purchase the function you want (like an e-mail server or some such) and simply use it. When you think about solutions this way, the architecture moves to the primary factor in your decision. It's problem-first architecting, and then laying in whatever technology or vendor best fixes the problem. To that end, most architects design a solution using a graphical tool (I use Visio) and then creating documents that  let the rest of the team (and business) know what is required. It's the template, or recipe, for the solution. This is extremely easy to do for SaaS - you merely point out what the needs are, research the vendor and present the findings (and bill) to the business. IT might not even be involved there. In PaaS it's not much more complicated - you use the same Application Lifecycle Management and design tools you always have for code, such as Visual Studio or some other process and toolset, and you can "stamp out" the application in multiple locations, update it and so on. IaaS is another story. Here you have multiple machines, operating systems, patches, virus scanning, run-times, scale-patterns and tools and much more that you have to deal with, since essentially it's just an in-house system being hosted by someone else. You can certainly automate builds of servers - we do this as technical professionals every day. From Windows to Linux, it's simple enough to create a "build script" that makes a system just like the one we made yesterday. What is more problematic is being able to tie those systems together in a coherent way (as a solution) and then stamp that out repeatedly, especially when you might want to deploy that solution on-premises, or in one cloud vendor or another. Lately I've been working with a company called RightScale that does exactly this. I'll point you to their site for more info, but the general idea is that you document out your intent for a set of servers, and it will deploy them to on-premises clouds, Windows Azure, and other cloud providers all from the same script. In other words, it doesn't contain the images or anything like that - it contains the scripts to build them on-premises or on a cloud vendor like Microsoft. Using a tool like this, you combine the steps of designing a system (all the way down to passwords and accounts if you wish) and then the document drives the distribution and implementation of that intent. As time goes on and more and more companies implement solutions on various providers (perhaps for HA and DR) then this becomes a compelling investigation. The RightScale information is here, if you want to investigate it further. Yes, there are other methods I've found, but most are tied to a single kind of cloud, and I'm not into vendor lock-in. Poppa Bear Level - Hands-on EvaluateRightScale at no cost.  Just bring your Windows Azurecredentials and follow the these tutorials: Sign Up for Windows Azure Add     Windows Azure to a RightScale Account Windows Azure Virtual Machines     3-tier Deployment Momma Bear Level - Just the Right level... ;0)  WindowsAzure Evaluation Guide - if you are new toWindows Azure Virtual Machines and new to RightScale, we recommend that youread the entire evaluation guide to gain a more complete understanding of theWindows Azure + RightScale solution.    WindowsAzure Support Page @ support.rightscale.com - FAQ's, tutorials,etc. for  Windows Azure Virtual Machines (Work in Progress) Baby Bear Level - Marketing WindowsAzure Page @ www.rightscale.com - find overview informationincluding solution briefs and presentation & demonstration videos   Scale     and Automate Applications on Windows Azure  Solution Brief     - how RightScale makes Windows Azure Virtual Machine even better SQL     Server on Windows Azure  Solution Brief   -       Run Highly Available SQL Server on Windows Azure Virtual Machines

  Read the article

• Subterranean IL: Generics and array covariance

  - by Simon Cooper

  Arrays in .NET are curious beasts. They are the only built-in collection types in the CLR, and SZ-arrays (single dimension, zero-indexed) have their own commands and IL syntax. One of their stranger properties is they have a kind of built-in covariance long before generic variance was added in .NET 4. However, this causes a subtle but important problem with generics. First of all, we need to briefly recap on array covariance. SZ-array covariance To demonstrate, I'll tweak the classes I introduced in my previous posts: public class IncrementableClass { public int Value; public virtual void Increment(int incrementBy) { Value += incrementBy; } } public class IncrementableClassx2 : IncrementableClass { public override void Increment(int incrementBy) { base.Increment(incrementBy); base.Increment(incrementBy); } } In the CLR, SZ-arrays of reference types are implicitly convertible to arrays of the element's supertypes, all the way up to object (note that this does not apply to value types). That is, an instance of IncrementableClassx2[] can be used wherever a IncrementableClass[] or object[] is required. When an SZ-array could be used in this fashion, a run-time type check is performed when you try to insert an object into the array to make sure you're not trying to insert an instance of IncrementableClass into an IncrementableClassx2[]. This check means that the following code will compile fine but will fail at run-time: IncrementableClass[] array = new IncrementableClassx2[1]; array[0] = new IncrementableClass(); // throws ArrayTypeMismatchException These checks are enforced by the various stelem* and ldelem* il instructions in such a way as to ensure you can't insert a IncrementableClass into a IncrementableClassx2[]. For the rest of this post, however, I'm going to concentrate on the ldelema instruction. ldelema This instruction pops the array index (int32) and array reference (O) off the stack, and pushes a pointer (&) to the corresponding array element. However, unlike the ldelem instruction, the instruction's type argument must match the run-time array type exactly. This is because, once you've got a managed pointer, you can use that pointer to both load and store values in that array element using the ldind* and stind* (load/store indirect) instructions. As the same pointer can be used for both input and output to the array, the type argument to ldelema must be invariant. At the time, this was a perfectly reasonable restriction, and maintained array type-safety within managed code. However, along came generics, and with it the constrained callvirt instruction. So, what happens when we combine array covariance and constrained callvirt? .method public static void CallIncrementArrayValue() { // IncrementableClassx2[] arr = new IncrementableClassx2[1] ldc.i4.1 newarr IncrementableClassx2 // arr[0] = new IncrementableClassx2(); dup newobj instance void IncrementableClassx2::.ctor() ldc.i4.0 stelem.ref // IncrementArrayValue<IncrementableClass>(arr, 0) // here, we're treating an IncrementableClassx2[] as IncrementableClass[] dup ldc.i4.0 call void IncrementArrayValue<class IncrementableClass>(!!0[],int32) // ... ret } .method public static void IncrementArrayValue<(IncrementableClass) T>( !!T[] arr, int32 index) { // arr[index].Increment(1) ldarg.0 ldarg.1 ldelema !!T ldc.i4.1 constrained. !!T callvirt instance void IIncrementable::Increment(int32) ret } And the result: Unhandled Exception: System.ArrayTypeMismatchException: Attempted to access an element as a type incompatible with the array. at IncrementArrayValue[T](T[] arr, Int32 index) at CallIncrementArrayValue() Hmm. We're instantiating the generic method as IncrementArrayValue<IncrementableClass>, but passing in an IncrementableClassx2[], hence the ldelema instruction is failing as it's expecting an IncrementableClass[]. On features and feature conflicts What we've got here is a conflict between existing behaviour (ldelema ensuring type safety on covariant arrays) and new behaviour (managed pointers to object references used for every constrained callvirt on generic type instances). And, although this is an edge case, there is no general workaround. The generic method could be hidden behind several layers of assemblies, wrappers and interfaces that make it a requirement to use array covariance when calling the generic method. Furthermore, this will only fail at runtime, whereas compile-time safety is what generics were designed for! The solution is the readonly. prefix instruction. This modifies the ldelema instruction to ignore the exact type check for arrays of reference types, and so it lets us take the address of array elements using a covariant type to the actual run-time type of the array: .method public static void IncrementArrayValue<(IncrementableClass) T>( !!T[] arr, int32 index) { // arr[index].Increment(1) ldarg.0 ldarg.1 readonly. ldelema !!T ldc.i4.1 constrained. !!T callvirt instance void IIncrementable::Increment(int32) ret } But what about type safety? In return for ignoring the type check, the resulting controlled mutability pointer can only be used in the following situations: As the object parameter to ldfld, ldflda, stfld, call and constrained callvirt instructions As the pointer parameter to ldobj or ldind* As the source parameter to cpobj In other words, the only operations allowed are those that read from the pointer; stind* and similar that alter the pointer itself are banned. This ensures that the array element we're pointing to won't be changed to anything untoward, and so type safety within the array is maintained. This is a typical example of the maxim that whenever you add a feature to a program, you have to consider how that feature interacts with every single one of the existing features. Although an edge case, the readonly. prefix instruction ensures that generics and array covariance work together and that compile-time type safety is maintained. Tune in next time for a look at the .ctor generic type constraint, and what it means.

  Read the article

• JavaOne 2012 Sunday Strategy Keynote

  - by Janice J. Heiss

  At the Sunday Strategy Keynote, held at the Masonic Auditorium, Hasan Rizvi, EVP, Middleware and Java Development, stated that the theme for this year's JavaOne is: “Make the future Java”-- meaning that Java continues in its role as the most popular, complete, productive, secure, and innovative development platform. But it also means, he qualified, the process by which we make the future Java -- an open, transparent, collaborative, and community-driven evolution. "Many of you have bet your businesses and your careers on Java, and we have bet our business on Java," he said.Rizvi detailed the three factors they consider critical to the success of Java--technology innovation, community participation, and Oracle's leadership/stewardship. He offered a scorecard in these three realms over the past year--with OS X and Linux ARM support on Java SE, open sourcing of JavaFX by the end of the year, the release of Java Embedded Suite 7.0 middleware platform, and multiple releases on the Java EE side. The JCP process continues, with new JSR activity, and JUGs show a 25% increase in participation since last year. Oracle, meanwhile, continues its commitment to both technology and community development/outreach--with four regional JavaOne conferences last year in various part of the world, as well as the release of Java Magazine, with over 120,000 current subscribers. Georges Saab, VP Development, Java SE, next reviewed features of Java SE 7--the first major revision to the platform under Oracle's stewardship, which has included near-monthly update releases offering hundreds of fixes, performance enhancements, and new features. Saab indicated that developers, ISVs, and hosting providers have all been rapid adopters of the platform. He also noted that Oracle's entire Fusion middleware stack is supported on SE 7. The supported platforms for SE 7 has also increased--from Windows, Linux, and Solaris, to OS X, Linux ARM, and the emerging ARM micro-server market. "In the last year, we've added as many new platforms for Java, as were added in the previous decade," said Saab.Saab also explored the upcoming JDK 8 release--including Project Lambda, Project Nashorn (a modern implementation of JavaScript running on the JVM), and others. He noted that Nashorn functionality had already been used internally in NetBeans 7.3, and announced that they were planning to contribute the implementation to OpenJDK. Nandini Ramani, VP Development, Java Client, ME and Card, discussed the latest news pertaining to JavaFX 2.0--releases on Windows, OS X, and Linux, release of the FX Scene Builder tool, the JavaFX WebView component in NetBeans 7.3, and an OpenJFX project in OpenJDK. Nandini announced, as of Sunday, the availability for download of JavaFX on Linux ARM (developer preview), as well as Scene Builder on Linux. She noted that for next year's JDK 8 release, JavaFX will offer 3D, as well as third-party component integration. Avinder Brar, Senior Software Engineer, Navis, and Dierk König, Canoo Fellow, next took the stage and demonstrated all that JavaFX offers, with a feature-rich, animation-rich, real-time cargo management application that employs Canoo's just open-sourced Dolphin technology.Saab also explored Java SE 9 and beyond--Jigsaw modularity, Penrose Project for interoperability with OSGi, improved multi-tenancy for Java in the cloud, and Project Sumatra. Phil Rogers, HSA Foundation President and AMD Corporate Fellow, explored heterogeneous computing platforms that combine the CPU and the parallel processor of the GPU into a single piece of silicon and shared memory—a hardware technology driven by such advanced functionalities as HD video, face recognition, and cloud workloads. Project Sumatra is an OpenJDK project targeted at bringing Java to such heterogeneous platforms--with hardware and software experts working together to modify the JVM for these advanced applications and platforms.Ramani next discussed the latest with Java in the embedded space--"the Internet of things" and M2M--declaring this to be "the next IT revolution," with Java as the ideal technology for the ecosystem. Last week, Oracle released Java ME Embedded 3.2 (for micro-contollers and low-power devices), and Java Embedded Suite 7.0 (a middleware stack based on Java SE 7). Axel Hansmann, VP Strategy and Marketing, Cinterion, explored his company's use of Java in M2M, and their new release of EHS5, the world's smallest 3G-capable M2M module, running Java ME Embedded. Hansmaan explained that Java offers them the ability to create a "simple to use, scalable, coherent, end-to-end layer" for such diverse edge devices.Marc Brule, Chief Financial Office, Royal Canadian Mint, also explored the fascinating use-case of JavaCard in his country's MintChip e-cash technology--deployable on smartphones, USB device, computer, tablet, or cloud. In parting, Ramani encouraged developers to download the latest releases of Java Embedded, and try them out.Cameron Purdy, VP, Fusion Middleware Development and Java EE, summarized the latest developments and announcements in the Enterprise space--greater developer productivity in Java EE6 (with more on the way in EE 7), portability between platforms, vendors, and even cloud-to-cloud portability. The earliest version of the Java EE 7 SDK is now available for download--in GlassFish 4--with WebSocket support, better JSON support, and more. The final release is scheduled for April of 2013. Nicole Otto, Senior Director, Consumer Digital Technology, Nike, explored her company's Java technology driven enterprise ecosystem for all things sports, including the NikeFuel accelerometer wrist band. Looking beyond Java EE 7, Purdy mentioned NoSQL database functionality for EE 8, the concurrency utilities (possibly in EE 7), some of the Avatar projects in EE 7, some in EE 8, multi-tenancy for the cloud, supporting SaaS applications, and more.Rizvi ended by introducing Dr. Robert Ballard, oceanographer and National Geographic Explorer in Residence--part of Oracle's philanthropic relationship with the National Geographic Society to fund K-12 education around ocean science and conservation. Ballard is best known for having discovered the wreckage of the Titanic. He offered a fascinating video and overview of the cutting edge technology used in such deep-sea explorations, noting that in his early days, high-bandwidth exploration meant that you’d go down in a submarine and "stick your face up against the window." Now, it's a remotely operated, technology telepresence--"I think of my Hercules vehicle as my equivalent of a Na'vi. When I go beneath the sea, I actually send my spirit." Using high bandwidth satellite links, such amazing explorations can now occur via smartphone, laptop, or whatever platform. Ballard’s team regularly offers live feeds and programming out to schools and the world, spanning 188 countries--with embedding educators as part of the expeditions. It's technology at its finest, inspiring the next-generation of scientists and explorers!

  Read the article

• Educause Top-Ten IT Issues - the most change in a decade or more

  - by user739873

  The Education IT Issue Panel has released the 2012 top-ten issues facing higher education IT leadership, and instead of the customary reshuffling of the same deck, the issues reflect much of the tumult and dynamism facing higher education generally.  I find it interesting (and encouraging) that at the top of this year's list is "Updating IT Professionals' Skills and Roles to Accommodate Emerging Technologies and Changing IT Management and Service Delivery Models."  This reflects, in my view, the realization that higher education IT must change in order to fully realize the potential for transforming the institution, and therefore it's people must learn new skills, understand and accept new ways of solving problems, and not be tied down by past practices or institutional inertia. What follows in the remaining 9 top issues all speak, in some form or fashion, to the need for dramatic change, but not just in the areas of "funding IT" (code for cost containment or reduction), but rather the need to increase effectiveness and efficiency of the institution through the use of technology—leveraging the wave of BYOD (Bring Your Own Device) to the institution's advantage, rather than viewing it as a threat and a problem to be contained. Although it's #10 of 10, IT Governance (and establishment and implementation of the governance model throughout the institution) is key to effectively acting upon many of the preceding issues in this year's list.  In the majority of cases, technology exists to meet the needs and requirements to effectively address many of the challenges outlined in top-ten issues list. Which brings me to my next point. Although I try not to sound too much like an Oracle commercial in these (all too infrequent) blog posts, I can't help but point out how much confluence there is between several of the top issues this year and what my colleagues and I have been evangelizing for some time. Starting from the bottom of the list up: 1) I'm gratified that research and the IT challenges it presents has made the cut.  Big Data (or Large Data as it's phased in the report) is rapidly going to overwhelm much of what exists today even at our most prepared and well-equipped research universities.  Combine large data with the significantly more stringent requirements around data preservation, archiving, sharing, curation, etc. coming from granting agencies like NSF, and you have the brewing storm that could result in a lot of "one-off" solutions to a problem that could very well be addressed collectively and "at scale."   2) Transformative effects of IT – while I see more and more examples of this, there is still much more that can be achieved. My experience tells me that culture (as the report indicates or at least poses the question) gets in the way more than technology not being up to task.  We spend too much time on "context" and not "core," and get lost in the weeds on the journey to truly transforming the institution with technology. 3) Analytics as a key element in improving various institutional outcomes.  In our work around Student Success, we see predictive "academic" analytics as essential to getting in front of the Student Success issue, regardless of how an institution or collections of institutions defines success.  Analytics must be part of the fabric of the key academic enterprise applications, not a bolt-on.  We will spend a significant amount of time on this topic during our semi-annual Education Industry Strategy Council meeting in Washington, D.C. later this month. 4) Cloud strategy for the broad range of applications in the academic enterprise.  Some of the recent work by Casey Green at the Campus Computing Survey would seem to indicate that there is movement in this area but mostly in what has been termed "below the campus" application areas such as collaboration tools, recruiting, and alumni relations.  It's time to get serious about sourcing elements of mature applications like student information systems, HR, Finance, etc. leveraging a model other than traditional on-campus custom. I've only selected a few areas of the list to highlight, but the unifying theme here (and this is where I run the risk of sounding like an Oracle commercial) is that these lofty goals cry out for partners that can bring economies of scale to bear on the problems married with a deep understanding of the nuances unique to higher education.  In a recent piece in Educause Review on Student Information Systems, the author points out that "best of breed is back". Unfortunately I am compelled to point out that best of breed is a large part of the reason we have made as little progress as we have as an industry in advancing some of the causes outlined above.  Don't confuse "integrated" and "full stack" for vendor lock-in.  The best-of-breed market forces that Ron points to ensure that solutions have to be "integratable" or they don't survive in the marketplace. However, by leveraging the efficiencies afforded by adopting solutions that are pre-integrated (and possibly metered out as a service) allows us to shed unnecessary costs – as difficult as these decisions are to make and to drive throughout the organization. Cole

  Read the article

• XBRL - Moving from Production to Consumption

  - by jmorourke

  Here's an update on what’s new with XBRL and how it can actually benefit your organization versus adding extra time and costs to financial reporting.  On February 29th (leap day) of 2012 I attended the XBRL and Financial Analysis Technology Conference at Baruch College in NYC.  The event, which attracted over 300 XBRL gurus and fans was presented by XBRL US, The New York Society of Security Analysts’ Improved Corporate Reporting Committee, and Baruch College’s Robert Zicklin Center for Corporate Integrity.  The event featured keynotes from the U.S. Securities and Exchange Commission (SEC), and the CFA Institute as well as panels covering alternative research tools and data, corporate reporting to stakeholders and a demonstration of XBRL analysis tools.  The program culminated in a presentation of the finalists and the winner of the $20,000 XBRL Challenge.    Some of the key points made in the sessions included: The focus of XBRL tools is moving from production to consumption. As of February 2012, over 9000 companies are reporting in XBRL, with over 10 million facts filed to date XBRL taxonomy extensions have dropped from 27% to 11% making comparisons easier The SEC reports that XBRL makes it easier to analyze disclosures, focus on accounting issues XBRL is helping standards-setters like the FASB speed their analysis of impacts of proposed accounting rule changes Companies like Thomson Reuters report that XBRL is helping speed the delivery of data to clients The most interesting part of the program though, was the session highlighting the 5 finalists in the XBRL Challenge competition and the winning solution.  The XBRL Challenge was launched in 2011 as a means of spurring the development of more end-user tools to help with the consumption of XBRL-based financial information.       Over an 8-month process handled by 5 judges, there were 84 registrants, 15 completed submissions, 5 finalists and one winner of the challenge.  All of the solutions are open-sourced tools and most of them focus on consuming XBRL-based data.  The 5 finalists included: Advanced XBRL Processing from Oxide solutions – XBRL viewer for taxonomies, filings and company data with peer comparison capabilities. Arrelle – API for XBRL processes, supports SEC Validations, RSS Feeds to access filings etc. Calcbench – XBRL data analysis tool that can be embedded in other web applications.  This tool can combine XBRL filings with real-time market data. XBRL to XL – allows the importing of XBRL data into Microsoft Excel for analysis, comparisons.  Users start on the web and populate Excel with XBRL data. XBurble – allows users to search and view XBRL filings, export to Excel, merge for comparison, and includes a workflow interface. The winner of the $20,000 XBRL Challenge prize was CalcBench.  More information about the XBRL Challenge and the finalists can be found at www.XBRLUS.org/challenge XBRL for Sustainability Reporting – other recent news on the XBRL front was the announcement by the Global Reporting Initiative (GRI) of an XBRL taxonomy for Sustainability Reporting.  This taxonomy was co-developed by the GRI and Deloitte and is designed to make the consumption of data found in Sustainability Reports much easier.  Although there is no government mandate to file Sustainability Reports in XBRL format, organizations that do use the GRI guidelines for Sustainability Reporting are encouraged to tag and submit their data voluntarily to the GRI – who will populate a database with Sustainability Reporting data and make this available to the public.  For more information about this initiative, you can go to the GRI web site:  www.globalreporting.org. So how does all of this benefit corporate filers and investors?  Since its introduction, the consensus in the market is that XBRL has mainly benefited the regulators and investment analysts who need to consume and analyze large volumes of financial data.  But with the emergence of more end-user tools for consuming and analyzing XBRL-based data, and the ability to perform quick comparisons of one company versus its peers and competitors in an industry group, will soon accelerate the benefits to corporate finance staff, as well as individual investors.  This could apply to financial results tagged in XBRL, as well as non-financial information such as Sustainability Reporting – which over the long-term will likely be integrated with financial reporting.   And as multiple regulators and agencies in a country adopt the XBRL standard for corporate filings, more benefits will accrue as companies will be able to leverage one set of XBRL-based financial data for multiple regulatory filings.     For more information about the latest developments in XBRL, check out the XBRL US or XBRL International web sites:  www.xbrl.org, www.xbrlus.org. For more information about what Oracle is doing to support XBRL, here are some links: http://www.oracle.com/us/solutions/ent-performance-bi/disclosure-management-065892.html http://www.oracle.com/technetwork/database/features/xmldb/index-087631.html Feel free to contact me if you have any questions or need more information:  [email protected]

  Read the article

• #OOW 2012 @PARIS...talking Oracle and Clouds, and Optimized Datacenter

  - by Eric Bezille

  For those of you who want to get most out of Oracle technologies to evolve your IT to the Next Wave, I encourage you to register to the up coming Oracle Optimized Datacenter event that will take place in Paris on November 28th. You will get the opportunity to exchange with Oracle experts and customers having successfully evolve their IT by leveraging Oracle technologies. You will also get the latest news on some of the Oracle systems announcements made during OOW 2012. During this event we will make an update about Oracle and Clouds, from private to public and hybrid models. So in preparing this session, I thought it was a good start to make a status of Cloud Computing in France, and CIO requirements in particular. Starting in 2009 with the first Cloud Camp in Paris, the market has evolved, but the basics are still the same : think hybrid. From Traditional IT to Clouds One size doesn't fit all, and for big companies having already an IT in place, there will be parts eligible to external (public) cloud, and parts that would be required to stay inside the firewalls, so ability to integrate both side is key.  None the less, one of the major impact of Cloud Computing trend on IT, reported by Forrester, is the pressure it makes on CIO to evolve towards the same model that end-users are now used to in their day to day life, where self-service and flexibility are paramount. This is what is driving IT to transform itself toward "a Global Service Provider", or for some as "IT "is" the Business" (see : Gartner Identifies Four Futures for IT and CIO), and for both models toward a Private Cloud Service Provider. In this journey, there is still a big difference between most of existing external Cloud and a firm IT : the number of applications that a CIO has to manage. Most cloud providers today are overly specialized, but at the end of the day, there are really few business processes that rely on only one application. So CIOs has to combine everything together external and internal. And for the internal parts that they will have to make them evolve to a Private Cloud, the scope can be very large. This will often require CIOs to evolve from their traditional approach to more disruptive ones, the time has come to introduce new standards and processes, if they want to succeed. So let's have a look at the different Cloud models, what type of users they are addressing, what value they bring and most importantly what needs to be done by the  Cloud Provider, and what is left over to the user. IaaS, PaaS, SaaS : what's provided and what needs to be done First of all the Cloud Provider will have to provide all the infrastructure needed to deliver the service. And the more value IT will want to provide, the more IT will have to deliver and integrate : from disks to applications. As we can see in the above picture, providing pure IaaS, left a lot to cover for the end-user, that’s why the end-user targeted by this Cloud Service is IT people. If you want to bring more value to developers, you need to provide to them a development platform ready to use, which is what PaaS is standing for, by providing not only the processors power, storage and OS, but also the Database and Middleware platform. SaaS being the last mile of the Cloud, providing an application ready to use by business users, the remaining part for the end-users being configuring and specifying the application for their specific usage. In addition to that, there are common challenges encompassing all type of Cloud Services : Security : covering all aspect, not only of users management but also data flows and data privacy Charge back : measuring what is used and by whom Application management : providing capabilities not only to deploy, but also to upgrade, from OS for IaaS, Database, and Middleware for PaaS, to a full Business Application for SaaS. Scalability : ability to evolve ALL the components of the Cloud Provider stack as needed Availability : ability to cover “always on” requirements Efficiency : providing a infrastructure that leverage shared resources in an efficient way and still comply to SLA (performances, availability, scalability, and ability to evolve) Automation : providing the orchestration of ALL the components in all service life-cycle (deployment, growth & shrink (elasticity), upgrades,...) Management : providing monitoring, configuring and self-service up to the end-users Oracle Strategy and Clouds For CIOs to succeed in their Private Cloud implementation, means that they encompass all those aspects for each component life-cycle that they selected to build their Cloud. That’s where a multi-vendors layered approach comes short in terms of efficiency. That’s the reason why Oracle focus on taking care of all those aspects directly at Engineering level, to truly provide efficient Cloud Services solutions for IaaS, PaaS and SaaS. We are going as far as embedding software functions in hardware (storage, processor level,...) to ensure the best SLA with the highest efficiency. The beauty of it, as we rely on standards, is that the Oracle components that you are running today in-house, are exactly the same that we are using to build Clouds, bringing you flexibility, reversibility and fast path to adoption. With Oracle Engineered Systems (Exadata, Exalogic & SPARC SuperCluster, more specifically, when talking about Cloud), we are delivering all those components hardware and software already engineered together at Oracle factory, with a single pane of glace for the management of ALL the components through Oracle Enterprise Manager, and with high-availability, scalability and ability to evolve by design. To give you a feeling of what does that bring in terms just of implementation project timeline, for example with Oracle SPARC SuperCluster, we have a consistent track of record to have the system plug into existing Datacenter and ready in a week. This includes Oracle Database, OS, virtualization, Database Storage (Exadata Storage Cells in this case), Application Storage, and all network configuration. This strategy enable CIOs to very quickly build Cloud Services, taking out not only the complexity of integrating everything together but also taking out the automation and evolution complexity and cost. I invite you to discuss all those aspect in regards of your particular context face2face on November 28th.

  Read the article

• Visual Tree Enumeration

  - by codingbloke

  I feel compelled to post this blog because I find I’m repeatedly posting this same code in silverlight and windows-phone-7 answers in Stackoverflow. One common task that we feel we need to do is burrow into the visual tree in a Silverlight or Windows Phone 7 application (actually more recently I found myself doing this in WPF as well).  This allows access to details that aren’t exposed directly by some controls.  A good example of this sort of requirement is found in the “Restoring exact scroll position of a listbox in Windows Phone 7”  question on stackoverflow.  This required that the scroll position of the scroll viewer internal to a listbox be accessed. A caveat One caveat here is that we should seriously challenge the need for this burrowing since it may indicate that there is a design problem.  Burrowing into the visual tree or indeed burrowing out to containing ancestors could represent significant coupling between module boundaries and that generally isn’t a good idea. Why isn’t this idea just not cast aside as a no-no?  Well the whole concept of a “Templated Control”, which are in extensive use in these applications, opens the coupling between the content of the visual tree and the internal code of a control.   For example, I can completely change the appearance and positioning of elements that make up a ComboBox.  The ComboBox control relies on specific template parts having set names of a specified type being present in my template.  Rightly or wrongly this does kind of give license to writing code that has similar coupling. Hasn’t this been done already? Yes it has.  There are number of blogs already out there with similar solutions.  In fact if you are using Silverlight toolkit the VisualTreeExtensions class already provides this feature.  However I prefer my specific code because of the simplicity principle I hold to.  Only write the minimum code necessary to give all the features needed.  In this case I add just two extension methods Ancestors and Descendents, note I don’t bother with “Get” or “Visual” prefixes.  Also I haven’t added Parent or Children methods nor additional “AndSelf” methods because all but Children is achievable with the addition of some other Linq methods.  I decided to give Descendents an additional overload for depth hence a depth of 1 is equivalent to Children but this overload is a little more flexible than simply Children. So here is the code:- VisualTreeEnumeration public static class VisualTreeEnumeration {     public static IEnumerable<DependencyObject> Descendents(this DependencyObject root, int depth)     {         int count = VisualTreeHelper.GetChildrenCount(root);         for (int i = 0; i < count; i++)         {             var child = VisualTreeHelper.GetChild(root, i);             yield return child;             if (depth > 0)             {                 foreach (var descendent in Descendents(child, --depth))                     yield return descendent;             }         }     }     public static IEnumerable<DependencyObject> Descendents(this DependencyObject root)     {         return Descendents(root, Int32.MaxValue);     }     public static IEnumerable<DependencyObject> Ancestors(this DependencyObject root)     {         DependencyObject current = VisualTreeHelper.GetParent(root);         while (current != null)         {             yield return current;             current = VisualTreeHelper.GetParent(current);         }     } }   Usage examples The following are some examples of how to combine the above extension methods with Linq to generate the other axis scenarios that tree traversal code might require. Missing Axis Scenarios var parent = control.Ancestors().Take(1).FirstOrDefault(); var children = control.Descendents(1); var previousSiblings = control.Ancestors().Take(1)     .SelectMany(p => p.Descendents(1).TakeWhile(c => c != control)); var followingSiblings = control.Ancestors().Take(1)     .SelectMany(p => p.Descendents(1).SkipWhile(c => c != control).Skip(1)); var ancestorsAndSelf = Enumerable.Repeat((DependencyObject)control, 1)     .Concat(control.Ancestors()); var descendentsAndSelf = Enumerable.Repeat((DependencyObject)control, 1)     .Concat(control.Descendents()); You might ask why I don’t just include these in the VisualTreeEnumerator.  I don’t on the principle of only including code that is actually needed.  If you find that one or more of the above  is needed in your code then go ahead and create additional methods.  One of the downsides to Extension methods is that they can make finding the method you actually want in intellisense harder. Here are some real world usage scenarios for these methods:- Real World Scenarios //Gets the internal scrollviewer of a ListBox ScrollViewer sv = someListBox.Descendents().OfType<ScrollViewer>().FirstOrDefault(); // Get all text boxes in current UserControl:- var textBoxes = this.Descendents().OfType<TextBox>(); // All UIElement direct children of the layout root grid:- var topLevelElements = LayoutRoot.Descendents(0).OfType<UIElement>(); // Find the containing `ListBoxItem` for a UIElement:- var container = elem.Ancestors().OfType<ListBoxItem>().FirstOrDefault(); // Seek a button with the name "PinkElephants" even if outside of the current Namescope:- var pinkElephantsButton = this.Descendents()     .OfType<Button>()     .FirstOrDefault(b => b.Name == "PinkElephants"); //Clear all checkboxes with the name "Selector" in a Treeview foreach (CheckBox checkBox in elem.Descendents()     .OfType<CheckBox>().Where(c => c.Name == "Selector")) {     checkBox.IsChecked = false; }   The last couple of examples above demonstrate a common requirement of finding controls that have a specific name.  FindName will often not find these controls because they exist in a different namescope. Hope you find this useful, if not I’m just glad to be able to link to this blog in future stackoverflow answers.

  Read the article

• Access Control Service v2: Registering Web Identities in your Applications [concepts]

  - by Your DisplayName here!

  ACS v2 support two fundamental types of client identities– I like to call them “enterprise identities” (WS-*) and “web identities” (Google, LiveID, OpenId in general…). I also see two different “mind sets” when it comes to application design using the above identity types: Enterprise identities – often the fact that a client can present a token from a trusted identity provider means he is a legitimate user of the application. Trust relationships and authorization details have been negotiated out of band (often on paper). Web identities – the fact that a user can authenticate with Google et al does not necessarily mean he is a legitimate (or registered) user of an application. Typically additional steps are necessary (like filling out a form, email confirmation etc). Sometimes also a mixture of both approaches exist, for the sake of this post, I will focus on the web identity case. I got a number of questions how to implement the web identity scenario and after some conversations it turns out it is the old authentication vs. authorization problem that gets in the way. Many people use the IsAuthenticated property on IIdentity to make security decisions in their applications (or deny user=”?” in ASP.NET terms). That’s a very natural thing to do, because authentication was done inside the application and we knew exactly when the IsAuthenticated condition is true. Been there, done that. Guilty ;) The fundamental difference between these “old style” apps and federation is, that authentication is not done by the application anymore. It is done by a third party service, and in the case of web identity providers, in services that are not under our control (nor do we have a formal business relationship with these providers). Now the issue is, when you switch to ACS, and someone with a Google account authenticates, indeed IsAuthenticated is true – because that’s what he is! This does not mean, that he is also authorized to use the application. It just proves he was able to authenticate with Google. Now this obviously leads to confusion. How can we solve that? Easy answer: We have to deal with authentication and authorization separately. Job done ;) For many application types I see this general approach: Application uses ACS for authentication (maybe both enterprise and web identities, we focus on web identities but you could easily have a dual approach here) Application offers to authenticate (or sign in) via web identity accounts like LiveID, Google, Facebook etc. Application also maintains a database of its “own” users. Typically you want to store additional information about the user In such an application type it is important to have a unique identifier for your users (think the primary key of your user database). What would that be? Most web identity provider (and all the standard ACS v2 supported ones) emit a NameIdentifier claim. This is a stable ID for the client (scoped to the relying party – more on that later). Furthermore ACS emits a claims identifying the identity provider (like the original issuer concept in WIF). When you combine these two values together, you can be sure to have a unique identifier for the user, e.g.: Facebook-134952459903700\799880347 You can now check on incoming calls, if the user is already registered and if yes, swap the ACS claims with claims coming from your user database. One claims would maybe be a role like “Registered User” which can then be easily used to do authorization checks in the application. The WIF claims authentication manager is a perfect place to do the claims transformation. If the user is not registered, show a register form. Maybe you can use some claims from the identity provider to pre-fill form fields. (see here where I show how to use the Facebook API to fetch additional user properties). After successful registration (which may include other mechanisms like a confirmation email), flip the bit in your database to make the web identity a registered user. This is all very theoretical. In the next post I will show some code and provide a download link for the complete sample. More on NameIdentifier Identity providers “guarantee” that the name identifier for a given user in your application will always be the same. But different applications (in the case of ACS – different ACS namespaces) will see different name identifiers. This is by design to protect the privacy of users because identical name identifiers could be used to create “profiles” of some sort for that user. In technical terms they create the name identifier approximately like this: name identifier = Hash((Provider Internal User ID) + (Relying Party Address)) Why is this important to know? Well – when you change the name of your ACS namespace, the name identifiers will change as well and you will will lose your “connection” to your existing users. Oh an btw – never use any other claims (like email address or name) to form a unique ID – these can often be changed by users.

  Read the article

• Identity Globe Trotters (Sep Edition): The Social Customer

  - by Tanu Sood

  Welcome to the inaugural edition of our monthly series - Identity Globe Trotters. Starting today, the last Friday of every month, we will explore regional commentary on Identity Management. We will invite guest contributors from around the world to share their opinions and experiences around Identity Management and highlight regional nuances, specific drivers, solutions and more. Today's feature is contributed by Michael Krebs, Head of Business Development at esentri consulting GmbH, a (SOA) specialized Oracle Gold Partner based in Ettlingen, Germany. In his current role, Krebs is dealing with the latest developments in Enterprise Social Networking and the Integration of Social Media within business processes.  By Michael Krebs The relevance of "easy sign-on" in the age of the "Social Customer" With the growth of Social Networks, the time people spend within those closed "eco-systems" is growing year by year. With social networks looking to integrate search engines, like Facebook announced some weeks ago, their relevance will continue to grow in contrast to the more conventional search engines. This is one of the reasons why social network accounts of the users are getting more and more like a virtual fingerprint. With the growing relevance of social networks the importance of a simple way for customers to get in touch with say, customer care or contract departments, will be crucial for sales processes in critical markets. Customers want to have one single point of contact and also an easy "login-method" with no dedicated usernames, passwords or proprietary accounts. The golden rule in the future social media driven markets will be: The lower the complexity of the initial contact, the better a company can profit from social networks. If you, for example, can generate a smart way of how an existing customer can use self-service portals, the cost in providing phone support can be lowered significantly. Recruiting and Hiring of "Digital Natives" Another particular example is "social" recruiting processes. The so called "digital natives" don´t want to type in their profile facts and CV´s in proprietary systems. Why not use the actual LinkedIn profile? In German speaking region, the market in the area of professional social networks is dominated by XING, the equivalent to LinkedIn. A few weeks back, this network also opened up their interfaces for integrating social sign-ons or the usage of profile data for recruiting-purposes. In the European (and especially the German) employment market, where the number of young candidates is shrinking because of the low birth rate in the region, it will become essential to use social-media supported hiring processes to find and on-board the rare talents. In fact, you will see traditional recruiting websites integrated with social hiring to attract the best talents in the market, where the pool of potential candidates has decreased dramatically over the years. Identity Management as a key factor in the Customer Experience process To create the biggest value for customers and also future employees, companies need to connect their HCM or CRM-systems with powerful Identity management solutions. With the highly efficient Oracle (social & mobile enabling) Identity Management solution, enterprises can combine easy sign on with secure connections to the backend infrastructure. This combination enables a "one-stop" service with personalized content for customers and talents. In addition, companies can collect valuable data for the enrichment of their CRM-data. The goal is to enrich the so called "Customer Experience" via all available customer channels and contact points. Those systems have already gained importance in the B2C-markets and will gradually spread out to B2B-channels in the near future. Conclusion: Central and "Social" Identity management is key to Customer Experience Management and Talent Management For a seamless delivery of "Customer Experience Management" and a modern way of recruiting the best talent, companies need to integrate Social Sign-on capabilities with modern CX - and Talent management infrastructure. This lowers the barrier for existing and future customers or employees to get in touch with sales, support or human resources. Identity management is the technology enabler and backbone for a modern Customer Experience Infrastructure. Oracle Identity management solutions provide the opportunity to secure Social Applications and connect them with modern CX-solutions. At the end, companies benefit from "best of breed" processes and solutions for enriching customer experience without compromising security. About esentri: esentri is a provider of enterprise social networking and brings the benefits of social network communication into business environments. As one key strength, esentri uses Oracle Identity Management solutions for delivering Social and Mobile access for Oracle’s CRM- and HCM-solutions. …..End Guest Post…. With new and enhanced features optimized to secure the new digital experience, the recently announced Oracle Identity Management 11g Release 2 enables organizations to securely embrace cloud, mobile and social infrastructures and reach new user communities to help further expand and develop their businesses. Additional Resources: Oracle Identity Management 11gR2 release Oracle Identity Management website Datasheet: Mobile and Social Access (pdf) IDM at OOW: Focus on Identity Management Facebook: OracleIDM Twitter: OracleIDM We look forward to your feedback on this post and welcome your suggestions for topics to cover in Identity Globe Trotters. Last Friday, every month!

  Read the article

• Cloud Deployment Models

  - by B R Clouse

  Normal 0 false false false EN-US X-NONE X-NONE As the cloud paradigm grows in depth and breadth, more readers are approaching the topic for the first time, or from a new perspective.  This blog is a basic review of  cloud deployment models, to help orient newcomers and neophytes. Most cloud deployments today are either private or public. It is also possible to connect a private cloud and a public cloud to form a hybrid cloud. A private cloud is for the exclusive use of an organization. Enterprises, universities and government agencies throughout the world are using private clouds. Some have designed, built and now manage their private clouds. Others use a private cloud that was built by and is now managed by a provider, hosted either onsite or at the provider’s datacenter. Because private clouds are for exclusive use, they are usually the option chosen by organizations with concerns about data security and guaranteed performance. Public clouds are open to anyone with an Internet connection. Because they require no capital investment from their users, they are particularly attractive to companies with limited resources in less regulated environments and for temporary workloads such as development and test environments. Public clouds offer a range of products, from end-user software packages to more basic services such as databases or operating environments. Public clouds may also offer cloud services such as a disaster recovery for a private cloud, or the ability to “cloudburst” a temporary workload spike from a private cloud to a public cloud. These are examples of a hybrid cloud. These are most feasible when the private and public clouds are built with similar technologies. Usually people think of a public cloud in terms of a user role, e.g., “Which public cloud should I consider using?” But someone needs to own and manage that public cloud. The company who owns and operates a public cloud is known as a public cloud provider. Oracle Database Cloud Service, Amazon RDS, database.com and Savvis Symphony Database are examples of public cloud database services. Normal 0 false false false EN-US X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} When evaluating deployment models, be aware that you can use any or all of the available options. Some workloads may be best-suited for a private cloud, some for a public or hybrid cloud. And you might deploy multiple private clouds in your organization. If you are going to combine multiple clouds, then you want to make sure that each cloud is based on a consistent technology portfolio and architecture. This simplifies management and gives you the greatest flexibility in moving resources and workloads among your different clouds. Oracle’s portfolio of cloud products and services enables both deployment models. Oracle can manage either model. Universities, government agencies and companies in all types of business everywhere in the world are using clouds built with the Oracle portfolio. By employing a consistent portfolio, these customers are able to run all of their workloads – from test and development to the most mission-critical -- in a consistent manner: One Enterprise Cloud, powered by Oracle.   /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;}

  Read the article

< Previous Page | 58 59 60 61 62 63 64 65 66 67 68 69  | Next Page >