Search Results

Search found 12844 results on 514 pages for 'dual graphics card'.

Page 62/514 | < Previous Page | 58 59 60 61 62 63 64 65 66 67 68 69  | Next Page >

• What can I change/investigate where the install does not complete?

  - by tunist

  I have already successfully installed Ubuntu 10.10 on my laptop and it works fine. I attempted to get my desktop PC to dual boot Windows and Ubuntu but found that neither the 32 or 64 bit install images will boot/install successfully. The startup script locks on 'initializing core #2' (or 1 or 3).. once I saw it say 'ok' at the end but it still locks there. I have tried to change the boot sequence by inserting 'debug' and 'acpi-off' into txt.cfg in both isolinux and syslinux folders but no changes were obvious during the boot.. as far as it got. The pc is built with an abit IP35 motherboard and nvidia 8600GT gfx card. Does anyone have any suggestion of what else I can change to get the install working?

  Read the article

• Increasing Ubuntu (12.04) partition size

  - by Anatoli

  I'm running a dual boot Windows XP/Ubuntu system, and I'd like to increase the size of the Ubuntu partition at the expense of the Windows partition. I've already shrunk the Windows partition, creating a large unallocated space between the Windows and Ubuntu partitions (See linked GParted screenshot). http://s17.postimage.org/5ppnrrnot/GParted.png I'd like to move my Ubuntu partition to the start of the unallocated space, and then increase its size to encompass all of the unallocated space. Once I try and move it (Using the GParted live cd), it tells me to expect big GRUB issues since I'm moving my Ubuntu partition's start sector. What is it that I should expect, and how do I handle it? With thanks, Anatoli

  Read the article

• After installing Ubuntu 12.10, Windows 8.1 disappears from start up menu

  - by Vaz

  I'm very new to Ubuntu (12.10), so I apologise if I'm not clear at any point! I had a Windows 8 (upgraded to Windows 8.1) and was fed up with it, so I converted to Ubuntu 12.10. I'd hoped to Dual Boot to at least get the benefit of both worlds. I created a partition for it in Windows and installed from a LiveUSB key (and installed into that parition). So now Ubuntu works great, but Windows 8.1 no longer shows up on the start up screen (where you theoretically pick which OS you want to boot in). I was going to try "Boot Repair" as mentioned here and restore MBR, but I don't want to start messing around with stuff I'm not entirely clear with. EDIT: For any of those who stumble here with the same problem, I just read here that a user wiped out his Windows partition by accident... I checked my own computer with sudo fdisk -l and there's only one Device Boot (dev/sda1). I'm not an expert, but I'm guessing that means Windows has been written over.

  Read the article

• Ubuntu 11.04 windows XP dual boot problem

  - by Bernie

  I have installed Ubuntu 11.04 direct from installation disk in a separate partition alongside an existing Windows XP installation. Ubuntu operates fine. I can see the old XP file system and the other network computer and access the internet. The problem is when the computer starts I get the boot selection list for Ubuntu or XP; but I am not allowed to select Windows XP (I cannot scroll down the list with tab or arrows keys). This would be fine for me but the computer is used by other people who are only familiar with windows XP at the moment. I have downloaded and run Boot Repair. Below is the link to the resulting data. http://paste.ubuntu.com/1082944/ I hope you can help solve this problem. I look forward to hearing from you. Kind Regards Bernie.

  Read the article

• Hide GRUB2 menu UNLESS you hold down Shift key: how to make this happen?

  - by Shasteriskt

  I have a Ubuntu - Windows 7 dual-boot set-up, and I would like to have it that my laptop would boot up Windows 7 unless I press down the Shift key right after boot and bring up the Grub2 menu from which I can choose Ubuntu. I researched on Grub2 and options for etc/default/grub and I have tried playing around with combinations with the GRUB_TIMEOUT and GRUB_HIDDEN_TIMEOUT values, but to no avail. I tried setting the GRUB_HIDDEN_TIMEOUT higher than the GRUB_TIMEOUT thinking that both countdown start simultaneously, but no - GRUB_TIMEOUT only starts after the other is done. Is this behavior achievable? If so, how?

  Read the article

• Enter the Magical World of Graphics with ATI FirePro Driver

  The recently launched ATI FirePro family of workstation graphic cards is equipped with the ATI FirePro driver which incorporates award winning and high cutting edge graphic technology to provide its ... [Author: Sunny Makkar - Computers and Internet - March 20, 2010]

  Read the article

• Why doesn't the installer see all of my hard drives?

  - by atodd

  I'm trying to setup a dual boot system with Windows Vista 64 (already installed) and Ubuntu 10.10. I added a new drive which is identical to the one Vista is installed on. When I boot into the LiveCD I can see and mount the second drive and edit it in Gparted. However, when I use the installer it will only bring up the drive that already has Vista installed. I've tried everything I know. I'm not sure if its a BIOS setting or something else I've missed. I've also tried both the desktop and alternate amd64 installs with the same result.

  Read the article

• Error Formatting Memory Card

  - by Kirby Fromm

  I just tried to look at some of my pictures on my sony cyber-shot dsc-tx5, with a Lexar platinum II 16 GB memory stick, and it is now saying I have a formatting error every time I turn the camera on. The card and Camera are both 3 months old and have worked perfectly before. I tried to check the card on my computer and it says there is an error, so the camera is working but the card is not. Does anyone know how I can fix this to get the pictures off of the card?

  Read the article

• How many textures can usually I bind at once?

  - by Avi

  I'm developing a game engine, and it's only going to work on modern (Shader model 4+) hardware. I figure that, by the time I'm done with it, that won't be such an unreasonable requirement. My question is: how many textures can I bind at once on a modern graphics card? 16 would be sufficient. Can I expect most modern graphics cards to support that amount? My GTX 460 appears to support 32, but I have no idea if that's representative of most modern video cards.

  Read the article

• in ubuntu 12.04 how may i know if my devices have it's driver installed??

  - by Aldo

  i have a dell N4110 laptop, and i want to know if the driver is installed and working well, something like the device manager in windows , or another way to know if a device is driverless or if the device might have a better driver, like my mousepad, in windows it have multi-touch gestures , that scrolls or zoom with two fingers (like an ipod) but in ubuntu it just works the right part as a scroll bar, so maybe it is installed one driver, but i need other one that uses well my devices. and the grphics card, i have not idea if it is well installed or isn't. i have a Intel 3000hd graphics card. thank you for your time. have a nice day people! =D

  Read the article

• Grub-Customizer made Windows 7 disappear from Gurb2

  - by user199055

  I am running dual-boot Ubuntu 12.04/Windows7. I wanted to change the boot order in Grub2 to have Windows on top of the list. I installed Grub-Customizer on Ubuntu 12.04 using the following terminal commands copied from another post: sudo add-apt-repository ppa:adabbas/1stppa sudo apt-get update sudo apt-get install grub-customizer After installing, I launched Grub-Customizer from Dash Home. Windows 7 does not appear in the list. I closed the program and was prompted to save the current settings. Upon rebooting, Windows did not appear in the Grub2 list. I went back into Grub-Customizer and clicked the "Revert" button but still no Windows 7. Does anyone know how I can fix this?

  Read the article

• Dual displays not working with Xinerama in Ubuntu 12.04

  - by user68489

  I just upgraded from Ubuntu 10.10 to 12.04. I had been using a display configuration just like the one described at http://bitkickers.blogspot.com/2009/08/rotate-just-one-monitor-with.html without any problems under 10.10. I have an nvidia Quadro FX 380 and have upgraded to the latest drivers (295.49). Everything appears to be fine when the system first boots up. However, after logging in, the left screen goes black, and the right screen displays what should be displayed on the left screen. Logging into Ubuntu 2D somewhat improves things. The left screen correctly displays the left portion of the desktop but the right screen contains a duplicate view of the left screen. Turning off Xinerama and enabling TwinView appears to fix the issues but does not allow the right monitor to be rotated. Since the display problems start to occur only after logging on, I thought it might have to do with carryover user configuration from 10.10 but the problems persist even when logging in as a guest. Clicking on System Settings - Displays results in the error message "Could not get screen information - RANDR extension is not present." Any help would be greatly appreciated.

  Read the article

• Cant find one particular wireless network. Worked before, but sudenly stopt working.

  - by Haakon

  My first question here. My problem is: I cant find my wireless network at home. Situation: It worked fine 7 days ago. It works with a cable(wierd). I find the network on my ipad/phone. I can connect to wireless hotspot network form my phone and wireless at my university, and it works fine. I can connect to the network in windows What I have tried: Tried this Strange network issue; works on windows, but not on ubuntu, works on campus wireless, but not at home (removing resolve.conf). Hardware and software: I have a Broadcom card Use dual boot ubuntu 12.04 - windows 7 Things I did to make wireless work: blacklist brcmsmac blacklist bcma blacklist b43 blacklist ssb Can anyone help me? I'm about to kill myself(not literary)!! I'm not that good in linux so go gentle on me:)

  Read the article

• Network card dies when trying to wake up laptop from sleep

  - by Bugmaster

  I have a Dell XPS 1640 laptop (aka Dell Studio XPS 16), running Vista. Whenever the laptop wakes up from sleep, my Broadcomm LAN card immediately dies. Any attempt to access it completely locks up whichever program I use to access it. There appears to be no way to re-awaken the card, other than rebooting; note that Vista does not even shut down properly if some program is waiting for the card. So far, I have tried the following: Disabled the "allow your computer to shut down this device to save power" in the device properties. This had no effect. Attempted to disable and then enable the card in the device properties. No effect. Tried ipconfig /renew: this locks up ipconfig to the point where I can't even kill its process. Force-install updated drivers from broadcomm: no effect. Does anyone have any other ideas ?

  Read the article

• Ubuntu boot repair Dell M1530

  - by Jon Laicov

  I'm new to Ubuntu and recently tried installing it on a Dell M1530. I had Win7 x64 installed on the HDD, and would like to have dual boot option. I had trouble installing the first time and after ran the boot-repair. After running through the process, it was unable to complete. I do have a URL http://paste.ubuntu.com/7942911. Can someone help me fix this issue or direct me where to post or email? Thanks in advance.

  Read the article

• Missing & Failed Folder At/and After Installation

  - by user170558

  I am new to Linux, and I've trying to install Ubuntu 12.04 LTS (dual boot with Windows XP). I choose to add new partition (FAT32 150 GB) for the shared folder. But when I pressed the install button, the installer warned me : Failed to create the 150 GB shared partition. So I turned back to the partition section and changed the shared partition to 50GB FAT32 (/mnt/shared). I pressed the install button and I was successful. But, when I boot Ubuntu, I could not find this 50GB folder. QUESTIONS: 1. What is wrong with the 150GB size? Is my hard disk failing? 2. Why is the 50GB shared folder not showing? Thank for the help.

  Read the article

• How to get rid of multiple linux versions in grub boot menu

  - by Silver Light

  I've been using dual boot on my PC for some time now, to use Ubuntu along side with Windows 7. One very disturbing thing happens, when Ubuntu linux core gets updated (this happens once in a while). They are added as options to the grub menu so, my boot menu now looks like this: Ubuntu, with linux 2.6.35-27 generic Ubuntu, with linux 2.6.35-27 generic (recovery mode) Ubuntu, with linux 2.6.35-25 generic Ubuntu, with linux 2.6.35-25 generic (recovery mode) Ubuntu, with linux 2.6.35-24 generic Ubuntu, with linux 2.6.35-24 generic (recovery mode) Ubuntu, with linux 2.6.35-22 generic Ubuntu, with linux 2.6.35-22 generic (recovery mode) Memory test Windows 7 This gets very annoying, because I want to load windows by default, but after every update it shifts down and I have to go to grub config and change the default option. My question: How to get rid of older versions of linux in the grub menu and leave only the newest one?

  Read the article

• Using BitBlt to Copy and Paste Graphics

  This article will demonstrate how to use BitBlt. and provide some technical pointers

  Read the article

• Advice on triple/quadruple-booting?

  - by professorfish

  I am currently running Windows 7 Home Premium x64 on my laptop. I would like to install more than one Linux distro, IN ADDITION TO Windows 7. How do I go about this, what do I need to be careful and aware of, is it possible? The specific distros I might eventually install: Definitely: Ubuntu (is it a good idea to install the Linux-Secure-Remix version?) Almost definitely: OpenSUSE Probably: Zorin Possibly: Arch Possibly: Fedora Possibly: FreeBSD Computer details: Successfully used WUBI for Ubuntu in the past Recently reinstalled Windows using the RECOVERY partition Windows 7 Home Premium x64 model: ASUS K53U series AMD Brazos Dual Core E450 1.65 GHz 750GB hard drive, currently partitioned into C: (300GB total, 246 GB free), D: (373GB - total, 167 GB free), and RECOVERY (the rest of the space, I think) 4GB RAM Can I be sure that GRUB will work, if WUBI has worked? In short, how do I go about triple- or quadruple-booting Windows 7, Ubuntu and other distros? What do I need to be aware of? How do I set up the partition structure? Thank you in advance

  Read the article

• Issues in Fedora detecting on board NIC card

  - by Vivek27

  Basically I have two NIC cards (on-board + Added in PCI slot) on my Linux machine running Fedora 12.By default the OS detects the NIC card in the PCI slot but it fails to detect the on board network card.Following are few details of the same Linux Vivek 2.6.32.26-175.fc12.i686.PAE #1 SMP Wed Dec 1 21:45:50 UTC 2010 i686 i686 i386 GNU/Linux ifconfig -a doesen't show the on board NIC card.Any thoughts for it please? Since it is also related to network configuration. I posted it here.

  Read the article

• Ubuntu 11.04 seem's like a laggy OS

  - by user772401

  I'm new to Linux/Ubuntu in general. I just dual booted the Ubuntu 11.04 w/Windows 7 on my Lenovo laptop - Intel i7 Quad Core 2Ghz, 4Gb ram, etc. etc... and for some reason Ubuntu is very laggy and slow. When I'm switching between programs (Chromium, folders, software center, etc..) it doesn't run as smooth as windows 7 (I have no more than 3 programs/windows up at a time...). I don't think it's my system requirements bkz Linux OSs are known to use low system resources. Could be a bad install or do people find it slow and laggy in general or is it my PC mfg type?? I installed it using Wubi - should I do a reinstall? I've already done all the recommended updates..

  Read the article

• Dual Screens not working nVidia

  - by user91396

  So I'm very much an Ubuntu noob, in fact I just install Ubuntu to my P.C. and I started it up with both my screens plugged into my nVidia's dvi and vga ports and logged in, change the skin to classic gnome, because that's how it was when I last used Ubuntu (8.1), and both screens were working separately. The trouble is that I got a notification saying there was nVidia drivers to be installed, so I install them and restart my P.C., as it told me to, and when I get back on only one of my screens is working and when I go into Displays (All Settings, Displays) it doesn't register my other screen at all, and it calls my working screen "Laptop". I've tried looking through several pages of Google but I see no answer. I did try to find the nvidia-settings to see if that had the answers but sadly I couldn't locate it. Thanks in advance for any help, but please remember, I am very new to Ubuntu.

  Read the article

• Windows Wireless Drivers - Install

  - by Justin Y.

  I have nearly ended my journey of making a dual-boot windows xp and ubuntu computer. Along with version 12.04, came the problem with my NetGear WNDA3100v2 wireless adapter. It wasn't compatible. My last step in my adventure is to install the software called Windows Wireless Drivers. I have internet access on my laptop and a flash drive. It would be preferable to receive a link to this program, because I see no link on the website, and I can't download it from the Ubuntu Software Center. Thanks.

  Read the article

• How to get the 'Install alongside Windows' option, i only see 'Install inside Windows'?

  - by IanDess

  I created a bootable USB Stick with Ubuntu 13.10 and when i boot from it and try to install it i only get the option "Install inside Windows" and the button in the bottom right corner says "Restart to continue". But i don't want that, i want a real dual boot. I installed Ubuntu few days ago on my laptop and i clearly remember that it said "Install ALONGSIDE Windows". What should i do to get that option? PS i previously had Ubuntu installed on this PC from WUBI, but i uninstalled it.

  Read the article

• Installing multi-boot Linux system

  - by user94924

  I have a dual (XP/Linux) boot Compaq Presario S4500UK with a couple of spare partitions on the boot drive which I want to use for testing different Linux distros/configs before installing them on "live" machines. I tried this with Oneiric which worked fine until I came to uninstalling the test system. Fortunately Oneiric uses Grub2 and so redirecting the bootloader to work from the original Linux partition was a piece of cake - if a bit annoying. I now need to do some tests on Hardy and DSL (Damned Small Linux), neither of which use Grub2. Question: Is it possible to install a test operating system without adding/replacing the bootloader (ie so I can still use Grub2 from the original partition with its nice interface and recovery facilities)? Is there another way of uninstalling/decommisioning a test OS which doesn't trash the boot loader? (The only way I know to do this is by deleting/reformatting the partition which takes with it the bootloader which is in that partition). Any help would be much appreciated. Tks jg1

  Read the article

< Previous Page | 58 59 60 61 62 63 64 65 66 67 68 69  | Next Page >