Search Results

Search found 12844 results on 514 pages for 'dual graphics card'.

Page 66/514 | < Previous Page | 62 63 64 65 66 67 68 69 70 71 72 73 | Next Page >

Intel 82576 Network card

- by No1_Melman

I have an Intel dual port pcie NIC card with two 82576 interfaces according to ubuntu 12.04. I run the command sudo lshw -html > /home/melman/Documents/hardware.html and it shows both of the interfaces but they're grayed out?! How can enable them? ifconfig output: bond0 Link encap:Ethernet HWaddr 00:00:00:00:00:00 inet addr:192.168.100.2 Bcast:192.168.100.255 Mask:255.255.255.0 UP BROADCAST MASTER MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) eth0 Link encap:Ethernet HWaddr e0:69:95:d1:db:ff inet addr:192.168.10.63 Bcast:192.168.10.255 Mask:255.255.255.0 inet6 addr: fe80::e269:95ff:fed1:dbff/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:2903 errors:0 dropped:0 overruns:0 frame:0 TX packets:2627 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:1524738 (1.5 MB) TX bytes:430196 (430.1 KB) Interrupt:20 Memory:f7f00000-f7f20000 eth3 Link encap:Ethernet HWaddr 00:50:b6:50:a7:f9 BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) eth4 Link encap:Ethernet HWaddr 00:1b:21:6e:99:77 BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) Memory:f7c00000-f7c20000 eth5 Link encap:Ethernet HWaddr 00:1b:21:6e:99:76 BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) Memory:f7c20000-f7c40000 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:246 errors:0 dropped:0 overruns:0 frame:0 TX packets:246 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:17584 (17.5 KB) TX bytes:17584 (17.5 KB)

Read the article
Graphic Card Installation Failure (NV 9600M GT)

- by Georg

I wanted to switch from 7 to Ubuntu. Now, the first thing that holds me back is the installation of the driver for my Nvidia 9600M GT. Ubuntu recommends me 4 drivers from the "Additional Driver" Section. Now, whatever driver I install, there are four things happening RANDOMLY after rebooting: The pc freezes before seeing bootup splash The pc freezes while seeing bootup splash image (ubuntu logo with the 5 dots) The pc gets into login screen and freezes instantly (Thought the unity-bar is transparent now) The pc freezes right after beeing able to login. (While this is happening the unity-bar changes from transparent to ugly-flat-style) I also tried to install the official Nvidia .run file but after exiting the X-Server, it says the driver is not compatible with the kernel and exits installation. Can somebody help me? I really wanna get rid of Windows :( But Ubuntu drives me perfectly insane. Please answer as noobish as possible. I'm an expert Windows user, but Linux is absolutely new to me. My Specs: Ubuntu 11.10 installed from USB Stick (like 100 times now :/ because I dont know how to remove the driver in recovery mode) 9600M GT 4GB Ram Intel Centrino 2 Dual Core 2.26GHz Win 7 and Ubuntu running along side. Thank you in advance, regards.

Read the article
Ubuntu installation does not recognize drive partitioning

- by Woltan

I have a 1TB drive and installed Windows 7 on a 128GB partition. When I now try to install Ubuntu 11.04 it does not recognize the Windows partition but offers the complete 1TB drive to install Ubuntu on instead. It displays: However, in the Ubuntu Disk Utility the Windows partitions are recognized. What do I need to do in order for Ubuntu to recognize the Windows 7 partition and install Ubuntu as a dual boot? Response to comments The following commands were executed and the results are shown below: fdisk -l WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util fdisk doesn't support GPT. Use GNU Parted. Disk /dev/sda: 1000.2 GB, 1000204886016 bytes 255 heads, 63 sectors/track, 121601 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x34a38165 Device Boot Start End Blocks Id System /dev/sda1 * 1 13 102400 7 HPFS/NTFS Partition 1 does not end on cylinder boundary. /dev/sda2 13 16318 130969600 7 HPFS/NTFS Disk /dev/sdb: 500.1 GB, 500107862016 bytes 255 heads, 63 sectors/track, 60801 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x14a714a6 Device Boot Start End Blocks Id System /dev/sdb1 1 60801 488384001 83 Linux parted -l Warning: Unable to open /dev/sr0 read-write (Read-only file system). /dev/sr0 has been opened read-only. Error: /dev/sr0: unrecognised disk label

Read the article
Dualboot 12.04/windows 7 After installation from USB reboot straight to Windows with no option to select ubuntu and no boot loader

- by Alkatraz

windows 7 home premium intel i5 2500k CPU ASUSP8Z68-V PRO Motherboard GeForce GTX 570 GPU corsair 120Gb SSD (windows 7 os) WD 1tb HDD I select the USB drive in the BIOS and boot to it and choose install. i select to manually configure partitions, partition the 200gb of unallocated space on my 1Tb HDD into 16Gb swap file 30Gb / extf4 and 154Gb /home extf4. I make sure that the boot loader is installed to corsair 120Gb SSD (where the windows boot is) and installation goes smoothly. When i reboot after install it runs through bios strait into windows. I have tried upwards of a dozen times and i have also tried with linuxmint. I have also redownloaded the ISO and used two different programs to create the live usb. the installation seems to go well as i can see the partitions i have created in the windows device manager after install http://imgur.com/Wp0V1 I currently run lubuntu on my laptop but it is not a dual boot. i'm assuming this is a boot loader issue and i am assuming that inside those partitioned files in my screenshot there is a working OS of ubuntu 12.04 i just have no way of getting to it.

Read the article
How to create or recover Windows Bootloader after deleting Ubuntu boot drive

- by Kincaid

I have a computer that dual-boots (or tri-boots) Windows 8 Release Preview, Windows 7, and Ubuntu 12.04. Grub boots between Windows 8 and Ubuntu; for which I use primarily. Recently, I decided to remove Ubuntu, as I hardly used it. I deleted the Ubuntu partition accidentally before replacing the Grub bootloader. Now, whenever I want to boot the machine, it gives me the "grub-rescue" prompt -- I am unable to boot into either Windows (8 nor 7), nor Ubuntu (except via USB, of course). I do not have any Windows 7/8 recovery media, so that isn't an option. Please note that after I deleted the Ubuntu partition, I put the PC into hibernate, and then turned it on. This means the C:\ [Windows 8] drive cannot be mounted. I don't know if that is bad, but it definitely doesn't make things better. I am currently booting Ubuntu via USB, in an effort to restore the Windows bootloader. I have looked into using boot-repair to solve the problem using the instructions here, although after attempting to apply the changes, it gave the error: "Please install the [mbr] packages. Then try again." I don't know why I'm getting this error; is there a way to install the 'mbr packages?' I honestly don't know what exactly they are, nor how to install them. Are there any other options I have not yet exhausted to be able to boot back into Windows, in the case that there is a better way? I want to set the bootloader to boot into Windows 8, but booting into either Windows 7 or 8 is fine (I can use EasyBCD from there). Is there a simple solution to this? I've checked BIOS, and I haven't been able to find a way to boot into Windows.

Read the article
"Bootmgr is missing...." Upon reboot [closed]

- by Gabe

Possible Duplicate: Install/running ubuntu on extarnal HDD with a windows laptop? Ill take you through the steps I did. Sorry if this question has already been resolved, I'm new to Ubuntu and forums in general. I have 2 internal HDDs in my computer, both with Win7. One HDD is my mothers, the other is mine. I did this because she didn't want my games on her computer, and my PCs motherboard took a crap on me, so I set up a dual boot. I also have an external HDD. This is what I am trying to install Ubuntu 12.04 on. I formatted the drive by right clicking it, then selecting "Format". It is now in NTSF format. I downloaded the Windows installer, ran it, and selected "I:/" (my externl hdd) as the install location. The download and installation ran smoothly, and it gave me the reboot prompt. I selected "Reboot now" and my PC rebooted. I was then interrupted by the "Bootmgr is missing. Press CTRL + ALT + DEL TO REBOOT" message. NOTE: I would like to use my HDD for a FULL Ubuntu installation, not the Live (i think thats what its called). I want all my files and settings from Ubuntu saved to the External drive as if it was my only drive. If you need more information just ask. Any help would be appreciated. Thanks in advance.

Read the article
Sharing swap space between Windows and Ubuntu

- by Leftium

This Linux Swap Space Mini-HOWTO describes how to share swap space between Windows and Linux. Do these instructions still apply to Ubuntu in 2011? How should I modify the steps for Ubuntu? Is there a better approach to sharing swap space? Based on the HOWTO, it seems best to create a dedicated NTFS swap partition: Dedicated so the swap file will be contiguous and remain unfragmented. NTFS so both Windows and Ubuntu can read/write to it. (Or is FAT32 better for this purpose?) Then, configure Ubuntu to prepare the swap space for use by Linux on start up; by Windows on shut down. I want to dual boot Ubuntu and Windows 7 on my X301 laptop. However, my laptop only has a 64 GB SDD, so I would like to conserve as much disk space as possible. update: There is an alternate method using a special driver for Windows that let you use a Linux swap partition for temporary storage like a RAM-disk, but it doesn't seem to be as good...

Read the article
Why is Ubuntu offline (except torrents) while Windows is online?

- by Fahim al Islam

I am using a static wired connection. Everything was perfect. But suddenly from few hours back I can't access any website. Dropbox, Ubuntu One also can't connect. Ping request is also unsuccessful, but I can download through torrent. I am not trying torrent download and browsing at the same time. So, I think it's not an issue about torrent using all the bandwidth. One important point is that this connection works perfectly on Windows on this same PC (My PC is dual-boot). I have tried the way what izx has suggested (using "sudo sh -c 'echo nameserver 8.8.8.8 /etc/resolv.conf'"), but I'm facing the same problem again. Now I can't even ping 8.8.8.8 and google.com. Though I can ping 74.125.228.2 (which is Google IP address) I can't understand what's happening and why this is happening. I'm new in this website many rules and regulations is unknown to me. So, please don't be bothered for my mistakes. Looking forward for help from anyone. Thanks to all.

Read the article
Encrypt SSD or not?

- by JamesBradbury

My desktop machine is running Ubuntu 12.04 (and will probably stay with it until the next LTS). I've got a new 120GB SSD on the way as my existing 420GB spinning disk. If it makes any difference I'll be dual-booting with Windows 7 across both disks too. I've read some helpful answers here about /home setup and enabling TRIM, which I intend to follow. So most of my /home will be on the SSD, with only photos, videos and music on the spinning disk. The question is, when I reinstall Ubuntu from CD or USB, whether I should encrypt the SSD? Specifically: I'm reading that drive wear isn't much of an issue with modern SSDs as they last decades even if you spam them. Is this true? How big a performance reduction will encrypting cause (I have an i7 Sandybridge, so I guess it can cope)? Is it more important from a security point of view to encrypt an SSD? I think I read somewhere that it may be hard to reliably wipe data. By all means answer even if you only know about one of those things.

Read the article
Why can't I install 10.04 on a system that already has 8.04?

- by Android Eve

Ubuntu 10.04 is beautiful. I love it. I am dying to install it on my PC, alongside the existing Ubuntu 8.04 (from which I write this message right now). But... it won't let me! When I reach the partitioning stage (manual!) Ubuntu 10.04 sees my two HDDs as one RAID volume. It doesn't see all the partitions I already have in place in /dev/sda and /dev/sdb. Even Windows 7 doesn't behave like this... (yes, I actually managed to install Windows 7 64-bit in dual-boot configuration with Ubuntu 8.04 on this same system). Note: GParted on Ubuntu 10.04 (live CD) sees the partition intended for Ubuntu 10.04 (/dev/sda4) perfectly, but is unable to format it. Note: I also removed that partition trying to reformat it via GParted once 10.04 LiveCD is loaded. It didn't help. I believe that the problem lies in Ubuntu "deciding for me" that the HDDs should be "seen" as a RAID, hence any partition is seen by GParted as "busy" or "locked". Any idea how to solve this problem?

Read the article
Installing Ubuntu along with windows 7 on shrunk partition

- by Thabo

I am new to Ubuntu OS and ask Ubuntu community. First this is not a duplicate question. Actually this a question which is a summery of all solutions and questions were posted in this community, related to Install Ubuntu along with Windows 7. I have bought a new Hp laptop with its original windows 7.I want to install Ubuntu along with windows 7 64 bit. I ran the Ubuntu 12.4 Desktop installation CD. But Ubuntu installer doesn't show the "along with windows 7 option"only it is showing two options. I read some questions and answers posted on this community. Specially following link Ubuntu 12.04 does not see windows already install on my computer (dual installation) I tried following thinks, I ran the terminal in live CD and tried sudo dmraid -rE command and dmraid remove command .But terminals says there is no dmraid partitions. So I tried another scenario checked my partitions with g parted.There are some partitions labeled C,HP tools,Recovery and System. C is containing windows 7 Files. So I shrank the volume of C Drive. Now I have 50000Mb of unallocated disk. I tried with Gparted to create a partition on that allocated space.It says some thing that you can't create more than four primary partition.Of course all other four partitions were created on widows are actually type of primary partition. So I went back to Windows 7 and tried to create a new volume on unallocated space.But unfortunately it says,If i create a new volume it will be the type of Dynamic partition.It says we cant boot another OS from that partition. So i cancelled that step. Now i have 50000Mb unallocated space but how can i install Ubuntu on that partition without harming the existing Windows 7? Because still I have only two options: Erase and install Ubuntu. Try something else. (I can see my unallocated space by going to "something else" option.)

Read the article
Ubuntu installation does not recognize drive partinioning

- by Woltan

I have a 1TB drive and installed Windows 7 on a 128GB partition. When I now try to install Ubuntu 11.04 it does not recognize the Windows partition but offers the complete 1TB drive to install Ubuntu on instead. It displays: However, in the Ubuntu Disk Utility the Windows partitions are recognized. What do I need to do in order for Ubuntu to recognize the Windows 7 partition and install Ubuntu as a dual boot? Response to comments The following commands were executed and the results are shown below: fdisk -l WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util fdisk doesn't support GPT. Use GNU Parted. Disk /dev/sda: 1000.2 GB, 1000204886016 bytes 255 heads, 63 sectors/track, 121601 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x34a38165 Device Boot Start End Blocks Id System /dev/sda1 * 1 13 102400 7 HPFS/NTFS Partition 1 does not end on cylinder boundary. /dev/sda2 13 16318 130969600 7 HPFS/NTFS Disk /dev/sdb: 500.1 GB, 500107862016 bytes 255 heads, 63 sectors/track, 60801 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x14a714a6 Device Boot Start End Blocks Id System /dev/sdb1 1 60801 488384001 83 Linux parted -l Warning: Unable to open /dev/sr0 read-write (Read-only file system). /dev/sr0 has been opened read-only. Error: /dev/sr0: unrecognised disk label

Read the article
Failure to Boot Windows 7 after Ubuntu install

- by Mike

My computer is a (brand new) PC notebook, without a CD drive running Windows 7. I followed this page to install from USB: https://help.ubuntu.com/community/Installation/FromUSBStickQuick The installation went well and i am using Ubuntu now (v. 12.04 i believe) I want to be able to dual boot Ubuntu and Win7 The problem is that the disc partitioning during the Linux install caused a problem with Windows, caused some problem with windows, and windows can no longer boot when i choose it at the GNU GRUB screen. When i restart my computer i can successfully boot Linux, but not Windows 7. At the GRUB screen - if i run Win7 normally, it freezes, shows a blue screen, and returns back to GRUB - if i run Win7 recovery, i dont know how to access the files that i need in order to run windows again, so nothing helpful happens. Can you please tell me what i would need to do(or link a guide) in order to run Windows again. (Windows and Linux is preferable, but if thats impossible going back to only Windows will help too) Im guessing the easiest thing to do is just to reinstall both OS, or is there anyway to undo the partition i made during the install? Thanks

Read the article
Still can't mount windows 8 drive after restart

- by Ishai Bloch

After following the instructions in other posts, I am still getting the same error when I try to mount my Windows 8 drive in Ubuntu 14.04 on a dual boot system. I have disabled fast start after shutdown, hybrid hibernation, and the preinstalled Asus Instant On service. I have tried restarting Windows rather than shutting down. In all cases I get the same error message, namely: Error mounting /dev/sda4 at /media/jesse/OS: Command-line `mount -t "ntfs" -o "uhelper=udisks2,nodev,nosuid,uid=1000,gid=1000,dmask=0077,fmask=0177" "/dev/sda4" "/media/jesse/OS"' exited with non-zero exit status 14: Windows is hibernated, refused to mount. Failed to mount '/dev/sda4': Operation not permitted The NTFS partition is in an unsafe state. Please resume and shutdown Windows fully (no hibernation or fast restarting), or mount the volume read-only with the 'ro' mount option. I did not have the same issue before upgrading from Ubuntu 12 to 14. For what it's worth my computer is supposedly a "hybrid" with an SSD drive installed, although I can't see that the SSD drive is being used at all with my present settings. Any thoughts?

Read the article
Cannot Create Bootable USB Drive from .iso file

- by tarabyte

I've tried formatting the flash drive as FAT as well as Mac OS journaled through diskutility but still cannot successfully create a bootable drive. I'm following the directions here exactly: http://www.ubuntu.com/download/help/create-a-usb-stick-on-mac-osx Environment: Macbook Pro trying to create a bootable flash drive for a Macbook Pro. 8GB flash drive. Tested ubuntu-12.04.1 as well as ubuntu 12.20 .iso 64-bit downloads. Nothing to repair in disk utility for this hard drive. Every time I finish step 8 of the tutorial I get "file system not recognized" with the options to "initialize" meaning to reformat my drive, "ignore" or "eject." When I try to re-inspect the flash drive in disk utility after plugging it back in I see that it has some error when I try to verify it but the "repair" button is disabled. I just want to boot to ubuntu when my mac first starts up. Oh the pain. http://lifehacker.com/5934942/how-to-dual-boot-linux-on-your-mac-and-take-back-your-powerhouse-apple-hardware "linux is free insomuch as your time is worthless" - old wise man

Read the article
GRUB2 not working after installing xubuntu 14.04

- by h3bm

I have a vaio laptop and it used to have installed windows 8 and Xubuntu 13.04 in dual boot, everything was working fine. I decided to update my version of xubuntu 14.04 LTS mainly because the support for 13.04 is finished and LTS version have 3 years of support. What I did was to format the partition where xubuntu 13.04 was installed and install 14.04 in that formated partition. When I restarted my computer willing to start using my new system I got the following message: error: symbol 'grub_term_highlight_color' not found and I was not able to enter any OS. I tried boot-repair from live USB more than two times and it did not fix the problem. I tried to enter to my computer using super GRUB2 disk, however it does not apperar to work with UEFI active (besides super grub2 disk says it can) I only get the message "no operating system found". If I boot super grub2 disk with UEFI disabled, super grub2 disk can not detect any OS,I also tried Rescatux distro, however, as of super grub2 disk, rescatux cannot enter when UEFI is active. I tried boot-repair with the option of "restore EFI backups", after that I was able to boot on windows, but no grub menu appeared. I ran boot-repair again with no improving results Here is the last Bootinfo report I got: http://paste.ubuntu.com/7609801/ Do you have any idea of what is happening? I really appreciate your help, Best regards,

Read the article
Ubuntu update deleted entries from grub

- by Kevin

My computer currently has Fedora, Ubuntu, and Windows installed. I just updated Ubuntu 12.04, and on restarting, the Fedora entry was gone from GRUB. Ubuntu and Windows remained, though. I have looked at these threads: Fedora login gone after Ubuntu updates on a dual boot http://forums.fedoraforum.org/showthread.php?t=279221 GRUB's menu.lst deleted after a kernel update However, I cannot figure out how to mount the drive as suggested. It does not appear in the list on the left side of nautilus as shown in the links above. I also tried running the following as suggested above: sudo grub-install /dev/sdX sudo update-grub But this gave scary errors: /usr/sbin/grub-setup: warn: Attempting to install GRUB to a partitionless disk or to a partition. This is a BAD idea.. /usr/sbin/grub-setup: warn: Embedding is not possible. GRUB can only be installed in this setup by using blocklists. However, blocklists are UNRELIABLE and their use is discouraged.. /usr/sbin/grub-setup: error: will not proceed with blocklists. The highlighted drive below is where Fedora lives. Thanks for any help reversing Ubuntu's decision to delete this from GRUB.

Read the article
Generating radial indicator images using C#

- by DigiMortal

In one of my projects I needed to draw radial indicators for processes measured in percent. Simple images like the one shown on right. I solved the problem by creating images in C# and saving them on server hard disc so if image is once generated then it is returned from disc next time. I am not master of graphics or geometrics but here is the code I wrote. Drawing radial indicator To get things done quick’n’easy way – later may some of younger developers be the one who may need to changes things – I divided my indicator drawing process to four steps shown below. 1. Fill pie 2. Draw circles 3. Fill inner circle 4. Draw text Drawing image Here is the code to draw indicators. private static void SaveRadialIndicator(int percent, string filePath) { using (Bitmap bitmap = new Bitmap(100, 100)) using (Graphics objGraphics = Graphics.FromImage(bitmap)) { // Initialize graphics objGraphics.Clear(Color.White); objGraphics.SmoothingMode = SmoothingMode.AntiAlias; objGraphics.TextRenderingHint = TextRenderingHint.ClearTypeGridFit; // Fill pie // Degrees are taken clockwise, 0 is parallel with x // For sweep angle we must convert percent to degrees (90/25 = 18/5) float startAngle = -90.0F; float sweepAngle = (18.0F / 5) * percent; Rectangle rectangle = new Rectangle(5, 5, 90, 90); objGraphics.FillPie(Brushes.Orange, rectangle, startAngle, sweepAngle); // Draw circles rectangle = new Rectangle(5, 5, 90, 90); objGraphics.DrawEllipse(Pens.LightGray, rectangle); rectangle = new Rectangle(20, 20, 60, 60); objGraphics.DrawEllipse(Pens.LightGray, rectangle); // Fill inner circle with white rectangle = new Rectangle(21, 21, 58, 58); objGraphics.FillEllipse(Brushes.White, rectangle); // Draw text on image // Use rectangle for text and align text to center of rectangle var font = new Font("Arial", 13, FontStyle.Bold); StringFormat stringFormat = new StringFormat(); stringFormat.Alignment = StringAlignment.Center; stringFormat.LineAlignment = StringAlignment.Center; rectangle = new Rectangle(20, 40, 62, 20); objGraphics.DrawString(percent + "%", font, Brushes.DarkGray, rectangle, stringFormat); // Save indicator to file objGraphics.Flush(); if (File.Exists(filePath)) File.Delete(filePath); bitmap.Save(filePath, ImageFormat.Png); } } Using indicators on web page To show indicators on your web page you can use the following code on page that outputs indicator images: protected void Page_Load(object sender, EventArgs e) { var percentString = Request.QueryString["percent"]; var percent = 0; if(!int.TryParse(percentString, out percent)) return; if(percent < 0 || percent > 100) return; var file = Server.MapPath("~/images/percent/" + percent + ".png"); if(!File.Exists(file)) SaveImage(percent, file); Response.Clear(); Response.ContentType = "image/png"; Response.WriteFile(file); Response.End(); } Om your pages where you need indicator you can set image source to Indicator.aspx (if you named your indicator handling file like this) and add percent as query string: <img src="Indicator.aspx?percent=30" /> That’s it! If somebody knows simpler way how to generate indicators like this I am interested in your feedback.

Read the article
IRQ Conflicts Causing Video Card and Boot Problems?

- by sanpatricio

tl;dr - I have 4 devices sharing 1 IRQ. Is this bad and how do I tell the BIOS to stop it? Background: I have an old Dell GX280 dual Pentium 4 that I (semi) resurrected last weekend with an installation of Ubuntu 12.04. Everything was going fine the first several hours until a problem that plagued me when WinXP was on that machine happened -- it froze. Completely froze. None of the myriad of ways I have found here on askubuntu helped me to regain control except a long-press of the power button to shut it off. Clearly, this wasn't a software/WinXP issue. After much googling, I found that hardware conflicts can often cause this sort of total lock-up and with all the odd blocks of yellow and flecks of color showing on my screen (both WinXP and Ubuntu) I figured my old GeForce 7600 was failing and causing me these odd issues. (A good canned-air dusting of the entire interior fixed the color fleck problem) Again, through much googling and numerous answers found on askubuntu, I somehow stumbled my way onto the lshw command. After going through it, line by line, I found that I have four devices sharing IRQ 16: eth0, wlan0, ide0 (DVD-RW), and my video card. In hindsight, I can recall weird instances of my Ethernet connection to another computer not working when I thought it should. I never full troubleshot those issues so it could be a coincidence. The other thing that has been plaguing me since installing Ubuntu (wasn't there during WinXP) has been periodic moments of my monitor getting no signal from Ubuntu during boot. The first couple days, it would disappear after the Dell boot screen and reappear at Ubuntu login. Now, it disappears after the Dell boot screen and doesn't return at all -- I have to hit F12 where I can load a safe mode version of Ubuntu and get more details like dmesg and lsdev. I also ran memtest86 overnight and woke up to zero errors, so failing RAM is out. Where do I go from here?

Read the article
Ubuntu installed along side Win 8 but not shown in boot

- by Mahesha999

Actually the question says it all, but let me tell you what I did, so u may find exactly what might have went wrong: I have Win 8 installed on 500 GB HDD. SO I shrunk it four times for: partition 1 - the original partition containing Win 8 sys (118GB) partition 2 - NTFS formatted for my data (188GB) partition 3 - NTFS formatted for my data (100GB) partition 4 - NTFS formatted for Linux distro 1 (I reformatted it to ext4 during Ubuntu installation) (25GB) partition 5 - NTFS formatted for Linux distro 1 (21GB) So now I booted Ubuntu from USB (created from ubuntu-12.04-desktop-amd64.iso) and deleted last two partitions 4 and 5 to create: partition 1 - ext4 where I installed Ubuntu (25GB) partition 2 - Swap (4GB) partition 3 - unallocated space, not formatted yet (17GB) Ubuntu installation said it installed successfully and that I have to restart to boot in Ubuntu. But when I restart Windows 8 auto booted - there was no dual boot. After that I devided above 100GB partition to 80Gb and 20GB ones (since I read online that I should have /home in separate partition for convenience, so I created 20GB partition for it) So I went on to manually create boot entry using EasyBCD as below show in picture at below link http://s19.postimage.org/dof2zuvw3/Free_BCD.png When I created the entry, FreeBCD showed the information as follows: Windows Boot Manager -------------------- identifier {9dea862c-5cdd-4e70-acc1-f32b344d4795} device partition=\Device\HarddiskVolume2 description Windows Boot Manager locale en-US inherit {7ea2e1ac-2e61-4728-aaa3-896d9d0a9f0e} integrityservices Enable default {ea8167ad-d189-11e1-90e4-ab2f09569dcc} resumeobject {ea8167a3-d189-11e1-90e4-ab2f09569dcc} displayorder {ea8167ad-d189-11e1-90e4-ab2f09569dcc} {ea8167b1-d189-11e1-90e4-ab2f09569dcc} toolsdisplayorder {b2721d73-1db4-4c62-bf78-c548a880142d} timeout 10 displaybootmenu Yes Windows Boot Loader ------------------- identifier {ea8167ad-d189-11e1-90e4-ab2f09569dcc} device partition=C: path \Windows\system32\winload.exe description Windows 8 locale en-US osdevice partition=C: systemroot \Windows resumeobject {9bc7fdf7-3ae0-11e2-be77-806e6f6e6963} Real-mode Boot Sector --------------------- identifier {ea8167b1-d189-11e1-90e4-ab2f09569dcc} device partition=C: path \NST\AutoNeoGrub0.mbr description Ubuntu Notice the last bolded entry created. Howevever after thet, when I rebooted it firstly showed old DOS like bootloader (no Windows 8 UI based bootloader) with two entries Windows and Ubuntu. Windows 8 was booting correctly but I was getting an error while booting Ubuntu taking me to GRUB Rescue. Please help am new to Linux world.

Read the article
Install Ubuntu in UEFI mode (unable to boot from USB)

- by Adele

I recently bought a Dell Inspiron 15R SE with Windows 8 (64 bit) pre-installed (UEFI supported). I want to install Ubuntu in dual boot with Windows 8. I tried to follow all instruction here : https://help.ubuntu.com/community/UEFI And here : Installing Ubuntu on a Pre-Installed Windows 8 (64-bit) System (UEFI Supported) So, I set Secure Boot to "off" into BIOS and I disable Fast Startup as described here : http://www.eightforums.com/tutorials/6320-fast-startup-turn-off-windows-8-a.html I created a bootable USB key for Ubuntu (Ubuntu 13.10 64bits international Edition) with Unetbootin. The problem is I am unable to boot from the USB key. The computer tries to boot into infinite loop. I also tried to boot from USB with "Legacy Boot" option instead of UEFI. In this case, the computer says there are no bootable devices. Of course, I tried to boot from my USB key on an other computer having normal BIOS and it works perfectly. Have you ideas about what I need to do to be able to boot from USB ? Thanks in advance for your help, Adele

Read the article
How do I boot to a windows recovery partition from GRUB in a Toshiba computer?

- by Andy Groff

This should be simple but I cannot figure out how to do it. I've been dual booting ubuntu and vista for a while. About 8 months ago, I realized my windows partition got corrupt and does not boot. This wasn't a problem since I didn't need it anyways, but now I do need windows. Using the disk manager I can see a partition called Toshiba System Volume which is 1.6 GB and one called HDD Recovery which is 7.8 GB. I assume the second one is what I need and i'm not sure what the first one is for. Anyways, how do I boot to this one? Is it a matter of configuring GRUB to boot to it? Once I do boot to it will it let me only reformat my windows partition, or is it going to restore the entire hard drive to factory condition? I assume I'll get the general windows installer which lets me choose the partition but, as you can probably tell, I've never used a recover partition. Should I burn the contents of the partition to a disk and boot to that? Sorry if this is obvious but I'm confused and cannot figure this out.

Read the article
Booting to a windows recovery partition from GRUB

- by Andy Groff

This should be simple but I cannot figure out how to do it. I've been dual booting ubuntu and vista for a while. About 8 months ago, I realized my windows partition got corrupt and does not boot. This wasn't a problem since I didn't need it anyways, but now I do need windows. Using the disk manager I can see a partition called Toshiba System Volume which is 1.6 GB and one called HDD Recovery which is 7.8 GB. I assume the second one is what I need and i'm not sure what the first one is for. Anyways, how do I boot to this one? Is it a matter of configuring GRUB to boot to it? Once I do boot to it will it let me only reformat my windows partition, or is it going to restore the entire hard drive to factory condition? I assume I'll get the general windows installer which lets me choose the partition but, as you can probably tell, I've never used a recover partition. Should I burn the contents of the partition to a disk and boot to that? Sorry if this is obvious but I'm confused and cannot figure this out.

Read the article
How do I fix broken installation?

- by Daniel

Let me start off by saying I'm dual booting 11.04 and Windows 7 on a Thinkpad T61p. The problem may have arisen when I hit the power button during normal startup. I'm fully aware how stupid this is. I don't know why I did it. I did it. Now, I can't get in to Ubuntu. Windows works fine. But when I try to start Ubuntu normally, it seems to run some checks, and does not start up. Sometimes, I see a black screen, and it tells me that it's running certain checks, and then, [ok]. Like... Battery Check Somethingorother [ok] It'll give me 1-5 of these. And then it just does nothing, and I have to turn it off. When I try to start in safe mode... I tried low graphics mode, and after going through a couple of dialogue boxes, I'm brought right back to the safe mode dialogue box. And if I hit 'resume,' a shell pushes up (still that grey on black "your computer is broken" type shell) and asks me to log in. I do, and try to run unity. It tells me something along the lines of: WARNING no DISPLAY variable set and then sets it to " :0" , which doesn't work. And then I can't do anything, really, and I have to restart. (I don't know how to do this from the command line, so I just hard reset. That command would be helpful). Does anybody have any idea how I can get Ubuntu working right again? FTP is less pleasant in Explorer than it is in Nautilus or w/e it is now.

Read the article
Grub2 won't detect Ubuntu 11.10 OS after reinstalling Win XP hal.dll.

- by yoopian

Hi I'm an Ubuntu newbie here. I've installed ubuntu 11.10 to dual boot on a single HDD. I did a manual partition and basically forgot all the on what sda my /boot partition is. My installation worked out just fine and I tried to install updates with it. After a while I when I wanted to boot to windows it showed that I was missing a "hal.dll" file. I've fixed this problem using the windows resource CD but then after booting up my PC it went straight to Windows XP. I've tried to manually reinstall Grub2 using a Live CD/USB and it worked but I think I have installed in on a different "sda#" (sda5 to be exact) because even though Grub2 loads when I boot my PC, only windows XP shows up as my OS and Ubuntu 11.10 is missing. Now, I've tried installing boot-repair to solve my problems using Live CD/USB. Boot-repair tells me that boot configuration was successful but then a basic grub interface shows up (the black one with a command line grub showing up. Now I can't even boot to Windows XP. Any help would be really appreciated. BTW here's the notes from boot repair that I was asked to save: http://paste.ubuntu.com/890228/ As you can see there are boot files on sda5 and sda7. I think that's the core problem that I have right now. Thanks in advance!

Read the article

< Previous Page | 62 63 64 65 66 67 68 69 70 71 72 73 | Next Page >