Search Results

Search found 2704 results on 109 pages for 'miguel ping'.

Page 62/109 | < Previous Page | 58 59 60 61 62 63 64 65 66 67 68 69  | Next Page >

• What's required to configure Ubuntu to use a specific DNS server?

  - by ks78

  I've setup two Amazon EC2 instances, both running Ubuntu Server. One is configured as a DNS server running bind9, which will be used to allow EC2 instances to communicate with each other based on hostname rather than IP, since their private IPs may change. I think I have the DNS server setup correctly. I want to use the second EC2 instance to test the DNS server. Using Webmin, I've added the DNS server's private IP to the client's DNS Servers list and added the domain to the Search Domains list. I did have to edit /etc/dhcp3/dhclint.conf to make my changes stick. After reboot, I expected I'd be able to ping or nslookup the DNS server from the test client, but it can't seem to find the server. Is there something I'm missing? What's required to configure an Ubuntu client to use a DNS server? I just want to make sure I'm not missing something before I assume the server's the problem.

  Read the article

• Locate rogue DHCP server

  - by Farseeker

  I know this is a serious long shot, but here we go. In the past week or so, for users connected to a particular switch in our network (there are four dumb switches all connected, and it only affects SOME, not all, users on the one switch) are getting DHCP addresses from a rogue DHCP server. I have physically checked every cable plugged into the switch in question to make sure that none of them have a router or wifi point attached to it. I know the IP of the DHCP server, but I cannot ping it, and it does not have a web interface. Does anyone have any suggestions on what I can do to locate it or shut it down? Unfortuantely all the switches are unmanaged, and as mentioned, there's no physical device (that I can find) plugged in to anything. It's getting critical, because it's screwing up the PXE boot of a whole bunch of thin clients.

  Read the article

• Virtualbox two networks slow

  - by Petr Marek

  I am running an Ubuntu server guest on Win 7 guest, and am running a webrick server (RoR dev). If I have just a host-only network, everything works fine and the browser response is instant. However, if I add a second network (NAT), so that the server can connect to the internet (for various updates etc.), the host-to-guest access gets really slow. I can't use the bridge connection. I am using the port 3000 (RoR Webrick server) and connecting to the guest via internet browser on this port (eg http://192.168.56.102:3000). Any idea, what could be causing this? If I ping the IP from host console, I get < 0ms. Here are the settings (relevant info is in english; Povoleno vše is Everything is allowed):

  Read the article

• Wireless Bridge with NetGear and TP-Link

  - by Tiago Cruz

  I have a wireless NetGear WGR614 v7 (little old) router connected to the internet, but I can't get a good signal in the other end of my house. I have another new one, model TP-Link TL-WR941ND wireless router. I was able to do the stuff works using a wired cable, but now, I would like to do the same using wireless connections (bridge mode, some like WDS?) Now, the computer connected to TP LINK was able to ping my computer connected to NETGEAR, but we cannot go IP ADDRESS outside my network, only internals ones. What can I do to configure this? Is needed that BOTH wireless routers support BRIDGE mode or only one its good enough? Thanks a lot!!

  Read the article

• OpenVPN on Ubuntu 11.10 - unable to redirect default gateway

  - by Vladimir Kadalashvili

  I'm trying to connect to connect to OpenVPN server from my Ubuntu 11.10 machine. I use the following command to do it (under root user): openvpn --config /home/vladimir/client.ovpn Everything seems to be OK, it connects normally without any warnings and errors, but when I try to browse the internet I see that I still use my own IP address, so VPN connection doesn't work. When I run openvpn command, it displays the following message among others: NOTE: unable to redirect default gateway -- Cannot read current default gateway from system I think it's the cause of this problem, but unfortunately I don't know how to fix it. Below is full output of openvpn command: Sat Jun 9 23:51:36 2012 OpenVPN 2.2.0 x86_64-linux-gnu [SSL] [LZO2] [EPOLL] [PKCS11] [eurephia] [MH] [PF_INET6] [IPv6 payload 20110424-2 (2.2RC2)] built on Jul 4 2011 Sat Jun 9 23:51:36 2012 NOTE: OpenVPN 2.1 requires '--script-security 2' or higher to call user-defined scripts or executables Sat Jun 9 23:51:36 2012 Control Channel Authentication: tls-auth using INLINE static key file Sat Jun 9 23:51:36 2012 Outgoing Control Channel Authentication: Using 160 bit message hash 'SHA1' for HMAC authentication Sat Jun 9 23:51:36 2012 Incoming Control Channel Authentication: Using 160 bit message hash 'SHA1' for HMAC authentication Sat Jun 9 23:51:36 2012 LZO compression initialized Sat Jun 9 23:51:36 2012 Control Channel MTU parms [ L:1542 D:166 EF:66 EB:0 ET:0 EL:0 ] Sat Jun 9 23:51:36 2012 Socket Buffers: R=[126976->200000] S=[126976->200000] Sat Jun 9 23:51:36 2012 Data Channel MTU parms [ L:1542 D:1450 EF:42 EB:135 ET:0 EL:0 AF:3/1 ] Sat Jun 9 23:51:36 2012 Local Options hash (VER=V4): '504e774e' Sat Jun 9 23:51:36 2012 Expected Remote Options hash (VER=V4): '14168603' Sat Jun 9 23:51:36 2012 UDPv4 link local: [undef] Sat Jun 9 23:51:36 2012 UDPv4 link remote: [AF_INET]94.229.78.130:1194 Sat Jun 9 23:51:37 2012 TLS: Initial packet from [AF_INET]94.229.78.130:1194, sid=13fd921b b42072ab Sat Jun 9 23:51:37 2012 VERIFY OK: depth=1, /CN=OpenVPN_CA Sat Jun 9 23:51:37 2012 VERIFY OK: nsCertType=SERVER Sat Jun 9 23:51:37 2012 VERIFY OK: depth=0, /CN=OpenVPN_Server Sat Jun 9 23:51:38 2012 Data Channel Encrypt: Cipher 'BF-CBC' initialized with 128 bit key Sat Jun 9 23:51:38 2012 Data Channel Encrypt: Using 160 bit message hash 'SHA1' for HMAC authentication Sat Jun 9 23:51:38 2012 Data Channel Decrypt: Cipher 'BF-CBC' initialized with 128 bit key Sat Jun 9 23:51:38 2012 Data Channel Decrypt: Using 160 bit message hash 'SHA1' for HMAC authentication Sat Jun 9 23:51:38 2012 Control Channel: TLSv1, cipher TLSv1/SSLv3 DHE-RSA-AES256-SHA, 1024 bit RSA Sat Jun 9 23:51:38 2012 [OpenVPN_Server] Peer Connection Initiated with [AF_INET]94.229.78.130:1194 Sat Jun 9 23:51:40 2012 SENT CONTROL [OpenVPN_Server]: 'PUSH_REQUEST' (status=1) Sat Jun 9 23:51:40 2012 PUSH: Received control message: 'PUSH_REPLY,explicit-exit-notify,topology subnet,route-delay 5 30,dhcp-pre-release,dhcp-renew,dhcp-release,route-metric 101,ping 5,ping-restart 40,redirect-gateway def1,redirect-gateway bypass-dhcp,redirect-gateway autolocal,route-gateway 5.5.0.1,dhcp-option DNS 8.8.8.8,dhcp-option DNS 8.8.4.4,register-dns,comp-lzo yes,ifconfig 5.5.117.43 255.255.0.0' Sat Jun 9 23:51:40 2012 Unrecognized option or missing parameter(s) in [PUSH-OPTIONS]:4: dhcp-pre-release (2.2.0) Sat Jun 9 23:51:40 2012 Unrecognized option or missing parameter(s) in [PUSH-OPTIONS]:5: dhcp-renew (2.2.0) Sat Jun 9 23:51:40 2012 Unrecognized option or missing parameter(s) in [PUSH-OPTIONS]:6: dhcp-release (2.2.0) Sat Jun 9 23:51:40 2012 Unrecognized option or missing parameter(s) in [PUSH-OPTIONS]:16: register-dns (2.2.0) Sat Jun 9 23:51:40 2012 OPTIONS IMPORT: timers and/or timeouts modified Sat Jun 9 23:51:40 2012 OPTIONS IMPORT: explicit notify parm(s) modified Sat Jun 9 23:51:40 2012 OPTIONS IMPORT: LZO parms modified Sat Jun 9 23:51:40 2012 OPTIONS IMPORT: --ifconfig/up options modified Sat Jun 9 23:51:40 2012 OPTIONS IMPORT: route options modified Sat Jun 9 23:51:40 2012 OPTIONS IMPORT: route-related options modified Sat Jun 9 23:51:40 2012 OPTIONS IMPORT: --ip-win32 and/or --dhcp-option options modified Sat Jun 9 23:51:40 2012 ROUTE: default_gateway=UNDEF Sat Jun 9 23:51:40 2012 TUN/TAP device tun0 opened Sat Jun 9 23:51:40 2012 TUN/TAP TX queue length set to 100 Sat Jun 9 23:51:40 2012 do_ifconfig, tt->ipv6=0, tt->did_ifconfig_ipv6_setup=0 Sat Jun 9 23:51:40 2012 /sbin/ifconfig tun0 5.5.117.43 netmask 255.255.0.0 mtu 1500 broadcast 5.5.255.255 Sat Jun 9 23:51:45 2012 NOTE: unable to redirect default gateway -- Cannot read current default gateway from system Sat Jun 9 23:51:45 2012 Initialization Sequence Completed Output of route command: Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface default * 0.0.0.0 U 0 0 0 ppp0 5.5.0.0 * 255.255.0.0 U 0 0 0 tun0 link-local * 255.255.0.0 U 1000 0 0 wlan0 192.168.0.0 * 255.255.255.0 U 0 0 0 wlan0 stream-ts1.net. * 255.255.255.255 UH 0 0 0 ppp0 Output of ifconfig command: eth0 Link encap:Ethernet HWaddr 6c:62:6d:44:0d:12 inet6 addr: fe80::6e62:6dff:fe44:d12/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:54594 errors:0 dropped:0 overruns:0 frame:0 TX packets:59897 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:44922107 (44.9 MB) TX bytes:8839969 (8.8 MB) Interrupt:41 Base address:0x8000 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:4561 errors:0 dropped:0 overruns:0 frame:0 TX packets:4561 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:685425 (685.4 KB) TX bytes:685425 (685.4 KB) ppp0 Link encap:Point-to-Point Protocol inet addr:213.206.63.44 P-t-P:213.206.34.4 Mask:255.255.255.255 UP POINTOPOINT RUNNING NOARP MULTICAST MTU:1492 Metric:1 RX packets:53577 errors:0 dropped:0 overruns:0 frame:0 TX packets:58892 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:3 RX bytes:43667387 (43.6 MB) TX bytes:7504776 (7.5 MB) tun0 Link encap:UNSPEC HWaddr 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00 inet addr:5.5.117.43 P-t-P:5.5.117.43 Mask:255.255.0.0 UP POINTOPOINT RUNNING NOARP MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:100 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) wlan0 Link encap:Ethernet HWaddr 00:27:19:f6:b5:cf inet addr:192.168.0.1 Bcast:0.0.0.0 Mask:255.255.255.0 inet6 addr: fe80::227:19ff:fef6:b5cf/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:12079 errors:0 dropped:0 overruns:0 frame:0 TX packets:11178 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:1483691 (1.4 MB) TX bytes:4307899 (4.3 MB) So my question is - how to make OpenVPN redirect default gateway? Thanks!

  Read the article

• share one vpn connection through windows rras with other clients

  - by KTYP

  I'm having a Cisco VPN connection to access our branch office. Since several people using the VPN I'm planing to install the VPN client on one of our server and share it through RRAS to save the licenses (like site - to - site). I install RRAS on a windows 2008 R2 (svrw2k8r2) and made the static routes on client computers. I could able to ping to the VPN's IP on svrw2k8r2 server but they can't seems to connect to the servers in other branch through this setup. Below is my setup My Branch Server: svrw2k8r2 - Windows 2008 R2 IP: 192.168.40.100/24 VPN IP: 10.0.100.12/8 Clients Win7 IP: 192.168.40.101 - 110 / 24 Other Branch Servers IP:10.10.0.10-20/24

  Read the article

• Redirect example.com to www.example.com VPS & Apache2

  - by Thomas Buckley

  I have a VPS and a domain name registered with the provider. When I enter www.example.com my site is displayed correctly, but entering example.com does not work. I am able to ping www.example.com. I added the following line to my apache2 default vhosts file: ServerName example.com ServerAlias www.example.com But this did not work. The VPS is a Debian5 OS. Any ideas? Note: There is no option via a provided control panel to add this, it's a basic package I purchased I know this post answers it but there are no extra comments and I'd like to know if it's the best way: way to redirect page to www using virtual host configuration in sites-available for apache2? Thanks

  Read the article

• Stop Zabbix notification for nodes under zabbix-proxy when proxy service is down

  - by A_01

  I have a zabbix-proxy and 12 nodes in that proxy. Right now whenever proxy service goes down. It send out of reach mail for all the 12 nodes. I want to send mail only for the zabbix proxy not for the nodes under that proxy Updated: Now I am trying to have a single trigger in which I want to check both the conditions like 1-check zabbix-host is not accessble from past x minutes. 2-check the host is not giving any data to the proxy(Host is down). Not the trigger should start shouting onle when we have condition in which proxy is running and node is down. I tried the below but its not working for me. Can some please help me out in this ({ip-10-4-1-17.ec2.internal:agent.ping.nodata(2m)}=1) & ({ip-10-4-1- 17.ec2.internal:zabbix[proxy,zabbixproxy.dev-test.com,lastaccess].fu??zzytime(120)}=1)

  Read the article

• How to connect devices behind Comcast router/modem with devices behind wireless router

  - by deeperDATA

  I know this is going to seem like a simple solution but I have been unable to find a clear answer through Google. Simple office setup: I have a Comcast modem/router that has 4 hard wired ports. In one of those ports I have a Cisco wireless router which also has 4 of its own ports. What is the method for getting devices behind the modem/router to ping/communicate with devices behind the wireless router? They are all on the same subnet but the IP ranges differ. The router produces 192.168.1.1 by default while the Comcast modem/router produces 10.1.10.1 by default. I think what I'm attempting to do might be considered "extending" the modem/router's network but I'm not sure. Thank you in advance for your assistance.

  Read the article

• configuration transfer over scp on commit not working on Juniper EX-2200 switch

  - by liv2hak

  I am making a series of configuration changes on Junos EX- 2200 switch.I have this router connected to another PC via an ethernet cable.The IP address of the switch is 192.168.1.1.I am able to ping from 192.168.1.1 to 192.168.1.0 and vice-versa. After the changes I make I do the following commands set system archival configuration transfer-on-commit set system archival configuration archive-sites "scp://[email protected]:/home/karthik/ws_karthik/sw1_config_1.txt" password godfather commit Where there is a user with user-name "karthik " and password "godfather".The path shown above also exists in the system How ever I don't see the configuration file sw1_config_1.txt created at the path specified. Also I have verified that sshd is running on the PC (192.168.1.10) Am I doing something wrong here? It would be great if anyone could help me out.

  Read the article

• VPN - Remote Desktop Connection

  - by alex

  I've set up a VPN connection to my work network on my home PC - running Windows 7 It connects fine. Once connected, I can ping machines that are on my work network using my home pc, however, if I try to RDP to them, it doesn't connect... It seems to initially connect, It asks me for the logon user / password, and when I set them, and click OK, it gets stuck on a screen saying: "Securing Remote Connection" Eventually it pops up saying "This computer can't connect to the remote computer. Try connecting again. If the problem persists, contact the owner of the remote computer or your network administrator" I know this computer is configured to allow remote connections etc... (and I've tried it with several different machines on the remote network) Any ideas what i've set wrong?

  Read the article

• Samba server error message in Windows XP

  - by Kumar P

  We have a RHEL5 Linux Server with few Windows XP client boxes. Using Samba server for share files between systems. My server working well in all systems but one Windows XP machine didn't connect to server. Here i give some screen shots for clear idea, For Check network connection i use ping, It working well. I use above way for connect to server. For all other systems it working well. I am getting error message like this. ** I am using squid for proxy in Linux, For me internet also working well in that Windows XP system. ** I Deleted stored user name and password for samba in windows XP. Help me to solve this problem.

  Read the article

• Can not connect to telnet server

  - by BloodPhilia

  So, I can't use telnet to connect to any server but it works fine from a different computer. It just says it can't connect. I tried the following things: Disable firewall and AV protection. (Basically, there was no security feature left online) Telnet is set to "Trusted" in my AV protection. (Kaspersky Internet Security 2011) Using Putty to telnet, but apparently Putty's connection is also inhibited. (Says it can't connect to host) Disabling the telnet client in Control Panel and then re-enabling it. (Windows 7 Ultimate) hosts file is clean. Checked for nasties using MBAM and KIS 2011 as well as going though my HijackThis logs, nothing found. I can connect to the same machines/servers through the web browser, ping, tracert, etc. Only telnet seems to be blocked. Any other thoughts?

  Read the article

• Problem with tomcat and getLocalHost exception

  - by xain

  I'm running a Linux server named S1 in a "cloud" server, and when tomcat 6.0.24 starts, I get the exception: org.apache.catalina.connector.Connector pause SEVERE: Protocol handler pause failed java.net.UnknownHostException: S1: S1 at java.net.InetAddress.getLocalHost(InetAddress.java:1353) at org.apache.jk.common.ChannelSocket.unLockSocket(ChannelSocket.java:485) Which then leads to: ERROR ehcache.Cache - Unable to set localhost. This prevents creation of a GUID. Cause was: Sjira1: S1 java.net.UnknownHostException: S1: S1 at java.net.InetAddress.getLocalHost(InetAddress.java:1353) at net.sf.ehcache.Cache.<clinit>(Cache.java:143) My hosts file is: 127.0.0.1 localhost localhost.localdomain (valid-ip-address) S1 S1.(valid domain name) ping S1 and S1.(valid domain name) return valid ip address nslookup S1.(valid domain name) returns valid ip address nslookup S1 throws ** server can't find S1: NXDOMAIN Any ideas about how to fix this ? Thanks

  Read the article

• Problem with tomcat and getLocalHost exception

  - by xain

  I'm running a Linux server named S1 in a "cloud" server, and when tomcat 6.0.24 starts, I get the exception: org.apache.catalina.connector.Connector pause SEVERE: Protocol handler pause failed java.net.UnknownHostException: S1: S1 at java.net.InetAddress.getLocalHost(InetAddress.java:1353) at org.apache.jk.common.ChannelSocket.unLockSocket(ChannelSocket.java:485) Which then leads to: ERROR ehcache.Cache - Unable to set localhost. This prevents creation of a GUID. Cause was: Sjira1: S1 java.net.UnknownHostException: S1: S1 at java.net.InetAddress.getLocalHost(InetAddress.java:1353) at net.sf.ehcache.Cache.<clinit>(Cache.java:143) My hosts file is: 127.0.0.1 localhost localhost.localdomain (valid-ip-address) S1 S1.(valid domain name) ping S1 and S1.(valid domain name) return valid ip address nslookup S1.(valid domain name) returns valid ip address nslookup S1 throws ** server can't find S1: NXDOMAIN Any ideas about how to fix this ? Thanks

  Read the article

• Connectivity good between VMs, but no connectivity between host and VM

  - by Greg Sansom

  I have a strange situation where connectivity (ie ping, access shared folders and services) is fine between virtual machines, but not between the host and the virtuals. I've been using Hyper-V almost every day for years and have never had a problem like this. Note the following: The host machine and all virtuals are running Windows Server 2008 r1. All machines can connect to the web, and the gateway router. Subnet mask and gateway reported in ipconfig are identical for all machines. I can access virtuals via the Hyper-V snap-in only. Doea anyone have suggestions about what might be wrong, or what diagnostic steps I can take?

  Read the article

• KVM-Guests can't get past bridge - no internet connection

  - by tmn29a

  I'm running a backported KVM on a Debian Squeeze. ATM the KVM-Guest can't connect to the internet through the bridge I have set up. The guests can reach each other, the host but nothing outside. I can neither ping, nslookup or do anything to a remote address. The guest are configured to have a static IP. When I didn;t have the bridge but a virtual bridge (the KVM-default) the guest could connect fine. After setting up the bridge things broke, so I think the problem lies there. # The loopback network interface auto lo br0 iface lo inet loopback # Bonding Interface auto bond0 iface bond0 inet static address 10.XXX.XXX.84 netmask 255.255.255.192 network 10.XXX.XXX.64 gateway 10.XXX.XXX.65 slaves eth0 eth1 bond_mode active-backup bond_miimon 100 bond_downdelay 200 bond_updelay 200 iface br0 inet static bridge_ports eth0 eth1 address 172.xxx.xxx.65 broadcast 172.xxx.xxx.127 netmask 255.255.255.192 gateway 172.xxx.xxx.65 bridge_stp on bridge_maxwait 0 Thanks in advance for your help !

  Read the article

• Double default gateway ubuntu server

  - by Elena

  I've just installed an Ubuntu server 9.10 on an EEEBox. This is my /etc/network/interfaces # The loopback network interface auto lo iface lo inet loopback auto wlan0 iface wlan0 inet static address 192.168.48.16 netmask 255.255.248.0 wireless-essid mynet auto eth0 iface eth0 inet static address xx.xx.xx.xx netmask 255.255.255.224 gateway xx.xx.yy.yy When I restart /etc/init.d/networking, I can access the eth0 ip address from the internet and I can ping the machines in my wifi network mynet. Everything works fine and I have one default gateway. But after some time if I check again the route I just find two default gateways: one is correct and is the previous one, but the other is the one of the wifi network. I have a quite low signal of mynet where my server is and sometimes the wifi just disconnect and then reconnect again. Then I think that this can be a problem and the dhcp of the wifi net, when reconnecting it also add a default gateway. Any idea on how to resolve this issue?

  Read the article

• Unable to access router even though internet works

  - by Tom Kaufmann

  I had access to my router and my internet was also working fine, but I was trying to do a port forward of 80 to my local machine and in the process I made a mistake. I went into Remote Management and for port 80 there were a few options like LAN, WAN, All. I accidently clicked "all" and then clicked "Disable". The problem is that I am no more able to access my router using 192.168.1.1, although my internet works. If I do a ping 192.168.1.1 I am able to receive the response, but I am no longer able to browse the internet. How can I fix this issue? I am using a zyxel p-660hn-t1a router given by my ISP.

  Read the article

• network timeout how to analyse problem

  - by elhombre

  In the last three month I was experiencing that my internet connection started to get very slow and websites had long time to load. The first thing I made was an ping to www.google.com which showed that I was loosing pakets. Here some of the results: 64 bytes from 74.125.39.103: icmp_seq=2909 ttl=53 time=48.222 ms Request timeout for icmp_seq 2910 Request timeout for icmp_seq 2911 64 bytes from 74.125.39.103: icmp_seq=2912 ttl=53 time=44.372 ms Days later I had to reset my router because it wasn't able to establish a correct network connection. It was after the reset when things worked again for some days. But later the same network timeouts started to happen again. I would like to know how I can analyze the problem to get to the source which is causing this timeouts. Which steps do you take to circle in this Problem? My Network Laptop - Wireless Router modem - ISP EDIT: I am on a Mac OS X 10.6

  Read the article

• Oracle Installation issue on Oracle Linux 6.4

  - by Pradhyoth

  I am trying to install Oracle 11g(11.2.0.1.0) on Oracle Linux 6.4(Remote Server). I get the following error(s) when Database Configuration Assistant is running ORA-01092: ORACLE instance terminated Disconnection forced ORA-48210: Relation Not Found Can someone help me regarding this errors, I cant seem to find what exactly that I have to do to solve this issue. I have done the same install on Oracle Linux 5.7 but never faced this issue before. The only problem while installing(which happens on 5.7 too) is that the required packages fail, but upon checking, it seems much higher versions are already installed. Also I cant do a yum update because the system seems to have connectivity issues with public-yum.oracle.com as I cant ping it(even though the IP Address gets resolved)

  Read the article

• Scheduled task to map a network drive runs, but doesn't map the drive

  - by bikefixxer

  I have a task set up to run whenever the computer is logged onto that deletes all network folders and maps a network drive. Here is what is in the batch file: @echo off net use * /delete /y net use b: \\Server\Share /user:DOMAIN\Username password exit When the computer is restarted or logged off and back on, the task runs fine (according to the scheduled tasks window saying when it ran last) but the mapped drive doesn't show up. I'll open the command prompt and type "net use" and it simply says "There are no entries in the list". If I then right click on the task and run it, it works and the mapped drive shows up. I've checked the log and nothing shows up. I've tried adding a timer in the batch file so it waits 10 seconds (ping 1.1.1.1 -n 1 -w 10000nul) thinking that maybe the network wasn't connected, but that didn't work. What else can I try? Thanks!

  Read the article

• Windows XP computer can't see Windows 7 shares

  - by Alex Brault

  I am building a network containing notably a laptop running XP and a computer running Windows 7. Both computer have shared folders and the 7 has a shared printer, to which another laptop running 7 is able to print. If I attempt to see the laptop's network shares on the PC, everything works perfectly: I am able to see and enter the folders. The reverse operation however doesn't work. Xp doesn't see the Windows 7 PC. Other things to note: As mentioned above, another Windows 7 computer is able to see the printer and I can ping both computers from either PC. Both computers are in the same workgroup named ALLAITEMENT Password-protected shares are turned off on the PC. The 7 Computer uses 40/56 bit encryption The Windows XP laptop has SP3

  Read the article

• HP DL580 G5 Hyper-V networking problem

  - by mr-perfect

  Hi I have installed the hyper-v role on a DL580 G5 cluster. The host operating system is a server 2008 x64 patched to the maximum. Everything has gone fine, but if I install a guest operating system, actually a windows server 2008 x64 I can't reach the network from it. It send many packets, but don't received any, so I can't ping the external network as well. I have installed the latest drivers to the server and unintalled the network configuration utility from the physical server, but no luck. I added a legacy adapter to the guest binded to the same phisycal adapter on the host machine but it can't help Any idea welcome...

  Read the article

• inconsistent ERRORLEVEL in a batch file

  - by Doron

  In a batch file, I have an inconsistent errorlevel behavior: The IP address 10.1.1.2 always replies. The following code always gives errorlevel 0 in one location (somewhere in the middle - exactly where i need it) inside the batch file. I copied only this snippet and placed it in the beginning and at the end of the batch file. In those locations, the result is always 1. Here is the code snippet: ping 10.1.1.2|Findstr /I /C:"timed out" /C:"host unreachable" echo %errorlevel% Any idea how to make it work also in the middle of the file? What am I doing wrong? I would hate to solve it with GOTOs(to the end of the file and back to where I need the result.)

  Read the article

< Previous Page | 58 59 60 61 62 63 64 65 66 67 68 69  | Next Page >