Search Results

Search found 2704 results on 109 pages for 'miguel ping'.

Page 65/109 | < Previous Page | 61 62 63 64 65 66 67 68 69 70 71 72  | Next Page >

• Internet wireless connected with limited access, windows vista

  - by r0ca

  I had some malware in my computer so I did a bit of manual work to remove it including resetting TCP/IP. Now the malware is gone. I can see my home wireless network and I can get connected to it but when connected I get the Internet wireless connected with limited access message. When I go to the IE I cannot browse. When I tried to ping 192.168.1.1 I got an Error Code 1231 Unconnected Network Problem. I have deactivated my Windows firewall as I thought it could be hyperactive security. Still no luck. I have Norton but it is not active, I have also Avast and AVG installed but they are not active. Any ideas?

  Read the article

• Configuring a Genius GW-7200 Access Point

  - by alex

  I came across an access point we had a few years ago. I'm now trying to get it set up to work on our network. here are a couple of pictures: http://twitpic.com/194u06/full http://twitpic.com/194u0v/full I have plugged this into our network via the network port on the back. I set up a DHCP reservation, based on the MAC address on the back of the access point, however I cannot ping it, nor access the web interface. I've held down the reset button for 10 seconds, to see if that would do anything. Google doesn't come up with anything on the matter :-(

  Read the article

• HowTo access Samba Share over VPN Tunnel?

  - by Jeff

  I don't know how to access a Samba share running on a Ubuntu 10.04 server through OpenVPN 2.1.0. I've installed & configured OpenVPN and everything works. The server end of the tunnel has the IP of 10.8.0.1. When I connect from XP (over our local network) I'm given the IP of 10.8.0.6. I can ping and trace route from both ends of the tunnel. Now, I'm lost...how to access the Samba share from XP and from OS X?

  Read the article

• How do I configure OpenVPN for accessing the internet with one NIC?

  - by Lekensteyn

  I've been trying to get OpenVPN to work for three days. After reading many questions, the HOWTO, the FAQ and even parts of a guide to Linux networking, I cannot get my an Internet connection to the Internet. I'm trying to set up a OpenVPN server on a VPS, which will be used for: secure access to the Internet bypassing port restrictions (directadmin/2222 for example) an IPv6 connection (my client does only have IPv4 connectivity, while the VPS has both IPv4 and native IPv6 connectivity) (if possible) I can connect to my server and access the machine (HTTP), but Internet connectivity fails completely. I'm using ping 8.8.8.8 for testing whether my connection works or not. Using tcpdump and iptables -t nat -A POSTROUTING -j LOG, I can confirm that the packets reach my server. If I ping to 8.8.8.8 on the VPS, I get an echo-reply from 8.8.8.8 as expected. When pinging from the client, I do not get an echo-reply. The VPS has only one NIC: etho. It runs on Xen. Summary: I want to have a secure connection between my laptop and the Internet using OpenVPN. If that works, I want to have IPv6 connectivity as well. Network setup and software: Home laptop (eth0: 192.168.2.10) (tap0: 10.8.0.2) | | (running Kubuntu 10.10; OpenVPN 2.1.0-3ubuntu1) | wifi | router/gateway (gateway 192.168.2.1) | INTERNET | VPS (eth0:1.2.3.4) (gateway, tap0: 10.8.0.1) (running Debian 6; OpenVPN 2.1.3-2) wifi and my home router should not cause problems since all traffic goes encrypted over UDP port 1194. I've turned IP forwarding on: # echo 1 > /proc/sys/net/ipv4/ip_forward iptables has been configured to allow forwarding traffic as well: iptables -F FORWARD iptables -A FORWARD -m state --state RELATED,ESTABLISHED -j ACCEPT iptables -A FORWARD -s 10.8.0.0/24 -j ACCEPT iptables -A FORWARD -j DROP I've tried each of these rules separately without luck (flushing the chains before executing): iptables -t nat -A POSTROUTING -s 10.8.0.0/24 -o eth0 -j SNAT --to 1.2.3.4 iptables -t nat -A POSTROUTING -s 10.8.0.0/24 -o eth0 -j MASQUERADE route -n before (server): 1.2.3.4 0.0.0.0 255.255.255.0 U 0 0 0 eth0 0.0.0.0 1.2.3.4 0.0.0.0 UG 0 0 0 eth0 route -n after (server): 1.2.3.4 0.0.0.0 255.255.255.0 U 0 0 0 eth0 10.8.0.0 0.0.0.0 255.255.255.0 U 0 0 0 tap0 0.0.0.0 1.2.3.4 0.0.0.0 UG 0 0 0 eth0 route -n before (client): 192.168.2.0 0.0.0.0 255.255.255.0 U 2 0 0 wlan0 169.254.0.0 0.0.0.0 255.255.0.0 U 1000 0 0 wlan0 0.0.0.0 192.168.2.1 0.0.0.0 UG 0 0 0 wlan0 route -n after (client): 1.2.3.4 192.168.2.1 255.255.255.255 UGH 0 0 0 wlan0 10.8.0.0 0.0.0.0 255.255.255.0 U 0 0 0 tap0 192.168.2.0 0.0.0.0 255.255.255.0 U 2 0 0 wlan0 169.254.0.0 0.0.0.0 255.255.0.0 U 1000 0 0 wlan0 0.0.0.0 10.8.0.1 128.0.0.0 UG 0 0 0 tap0 128.0.0.0 10.8.0.1 128.0.0.0 UG 0 0 0 tap0 0.0.0.0 192.168.2.1 0.0.0.0 UG 0 0 0 wlan0 SERVER config proto udp dev tap ca ca.crt cert server.crt key server.key dh dh1024.pem server 10.8.0.0 255.255.255.0 push "redirect-gateway def1" ifconfig-pool-persist ipp.txt keepalive 10 120 tls-auth ta.key 0 comp-lzo user nobody group nobody persist-key persist-tun log-append openvpn-log verb 3 mute 10 CLIENT config dev tap proto udp remote 1.2.3.4 1194 resolv-retry infinite nobind persist-key persist-tun ca ca.crt cert client.crt key client.key ns-cert-type server tls-auth ta.key 1 comp-lzo verb 3 mute 20 traceroute 8.8.8.8 works as expected (similar output without OpenVPN activated): 1 10.8.0.1 (10.8.0.1) 24.276 ms 26.891 ms 29.454 ms 2 gw03.sbp.directvps.nl (178.21.112.1) 31.161 ms 31.890 ms 34.458 ms 3 ge0-v0652.cr0.nik-ams.nl.as8312.net (195.210.57.105) 35.353 ms 36.874 ms 38.403 ms 4 ge0-v3900.cr0.nik-ams.nl.as8312.net (195.210.57.53) 41.311 ms 41.561 ms 43.006 ms 5 * * * 6 209.85.248.88 (209.85.248.88) 147.061 ms 36.931 ms 28.063 ms 7 216.239.49.36 (216.239.49.36) 31.109 ms 33.292 ms 216.239.49.28 (216.239.49.28) 64.723 ms 8 209.85.255.130 (209.85.255.130) 49.350 ms 209.85.255.126 (209.85.255.126) 49.619 ms 209.85.255.122 (209.85.255.122) 52.416 ms 9 google-public-dns-a.google.com (8.8.8.8) 41.266 ms 44.054 ms 44.730 ms If you have any suggestions, please comment or answer. Thanks in advance.

  Read the article

• Reputable web based ssh client? [closed]

  - by Doug T.

  I'm connected to a coffee shop's wireless network right now, and I suspected I'd be able to use my laptop and ssh somewhere. Unlucky me they seem to be blocking everything but web traffic (my testing seems to show everything but port 80 is working, can't ping, ftp, etc). I googled "web based ssh clients" however I have reservations about entering my login credentials on any Joe Schmoe's web app. I was wondering if anyone has had any experience with any reputable web based ssh clients? If so could you please point me at one that I could trust?

  Read the article

• dns update frequency

  - by Roderik

  I was looking after the frequency of dns updates, since I had to change the location fo the vps that hosts the domain contents. What I ussualy read is that it takes up to 72 hours to get these changes propagated, sometimes this can be sooner based on your location. I changed the nameservers for the domain vasco-da-gama.nl about a week ago. When I ping the domain name from different locations it still points the old vps (which does not exist anymore). I was wondering if its normal that it can take this long for the change to point my new vps? If I might have done something wrong here, where should I look for it (it looks all ok, when I check it). If it is reachable from your location (if so, its probably a matter of time it will propagate to my location).

  Read the article

• Linux (Kubuntu 9.10): Strange DNS problem [seems to be IPv6 issue]

  - by Homer J. Simpson

  Hi, I'm experiencing strange problems with my Kubuntu 9.10 when doing DNS requests from various applications. The requests are extremely slow, so loading any pages in Firefox or Konqueror, doing package installations in Kpackagemanager and other apps is really painful, while for example Opera doesnt have any problems, and ping is normally fast as well for DNS pings. I checked the proxy settings of both the used applications as well as of the general system and there are none, so to me it doesn't seem as there was something inbetween.. Does anybody have an idea on what to check for possible problem sources or how to solve this ? I'm behind a DSL home router which does the DHCP (and works well with my other computer). Any kind of advice would be really helpful. Edit: It seems to be some kind of IPv6 problem, as I could get it to work by disabling IPv6 explicitly in Firefox. Is there a general solution to this ?

  Read the article

• Connect to MS Sql 2008 on local VM

  - by Campo

  I have a test machine. Server 2008 with Hyper V MSSQL 2008 Enterprise Lets call it MACHINE A on the VM it is as well Server 2008 with another MSSQL 2008 Ent Call it VM B I setup a DB on MACHINE A then backed it up and restored following the prepare database for mirroring instructions on MSDN onto VM B. I used to be able to connect to the VM B Instance from the main test server (MACHINE A) but now I cannot for some reason. It cannot seem to find the instance at all even when I browse network databases. I can ping the VM from any computer on the network and access its shares so I know it is discoverable. Just the end of a long day maybe I am missing something here.

  Read the article

• DNS error only in IE

  - by Le_Quack

  Our Intranet page has stopped working on some machines/some user accounts. The error I am getting points to a DNS issue but If I ping the site from the command line the it responds fine. The error I'm gettting on IE is Error: The web filter could not find the address for the requested site Why are you seeing this: The system is unable too determine the IP address of intranet.example.com I'm not quite sure why it mentions the web filter as there is a proxy exception for the intranet page and if I run a trace route it doesn't go via the web proxy (filtering system). Finally it isn't affecting everyone, just random users, also it doesn't affect the random users on all the client machines they use. I have one user where it happens on any client they log onto where most its just certian clients. It's even "fixed" itself for a few peoples. EDIT: hey Mikey thanks for the fast response. Proxies are correct and automatic configuration is off (both via GPO)

  Read the article

• Routing traffic to another internal network

  - by Jason

  OK, so here is the scenario. I have 4 Locations connected with an MPLS. I have installed an ASA at the primary location which is 10.20.1.0. Traffic is fine internally and to the world, however... I can't route traffic over the MPLS to another network. It is being blocked by an implicit deny rule even though there is a rule to allow any to any less secure interface (it should be using the same interface in/out, right?). I have a static route for the network in and the ASA can ping it - Just not traffic on the internal network of the ASA. -Jason

  Read the article

• test of ICMP block

  - by Marcos

  In my bash scripts I have been using something like: until fping -u google.com; do echo "$0[$$] Network/DNS down?? $(date)" 1>&2 && sleep $(($RANDOM%(1 + ++trynum * 1) +1)).222; done to test for online connectivity. It halts in place, sleeping growing random intervals, until it can ping google.com again. Problem: At some sites ICMP pings are blocked altogether, and web pages are still reachable. What's a short way to test for this general case? Based on that test I will switch over to an http-based test like the exit status of curl -s google.com >/dev/null if that is a good one.

  Read the article

• google.com different IP in different countries. How?

  - by HeavyWave

  If you ping google.com from different countries you will get replies from local google servers. How does that work? Can a DNS record have multiple A addresses? Could someone point me to the technology they use to do that? Update. OK, so Google's DNS server gives out a different IP based on the location. But, as Alexandre Jasmin pointed out, how do they track the location? Surely their DNS won't ever see your IP address. Is the server querying Google's DNS guaranteed to be from the location it represents?

  Read the article

• DNS responding only to nslookup in Windows 7

  - by DeeJay1

  Hello. I have an interesting DNS issue in AD (2008R2) which I can't find a way to debug. Mainly if from commandline I try ping <machinename> then I get the reply that the hostr isn't found. But when I do nslookup <machinename> I get the correct response from my DNS with proper AAAA and A records. Anyone has an idea what could cause this? The client machines run Windows 7 Enterprise.

  Read the article

• NIS client cannot find NIS server (Opensuse)

  - by Tony

  I installed NIS server on head node of a virtual cluster(VirtualBox). One of the node (let's say node-1) can find NIS server and work with it, but another node (node-2) just can't find the NIS server in Yast while it can ping and ssh to both head node and node-1. BTW, all the nodes are VMs, head node and node-1 are on the same physical machine, node-2 is on another physical machine. I set the domain name in /etc/hosts and /etc/yp.conf, and ypwhich sometimes gives the correct domainname several minutes later complains about "ypwhich: Can't communicate with ypbind", and will back to work after some time. Also tried rpcinfo -p hostname and it worked as expected. I almost tried every thing I can find on internet, but seems that not many people had this problem. Any help would be very appreciated.

  Read the article

• Setting up a static IP address (public) in Ubuntu

  - by ycseattle

  I have a business class internet connection and need to setup a static ip address for a machine. I did a search online and only find how to setup static local ip addresses (like 192.168..). I tried the same technique, and only setup the ip address and netmask, but after restart networking the computer could not connect to the outside world. This is what I did: 1) edit /etc/network/interfaces iface eth0 inet static address 173.10.xxx.xx netmask 255.255.255.252 2) edit /etc/resolv.conf search wp.comcast.net nameserver xx.xx.xx.xxx nameserver xx.xx.xx.xxx 3) restart network sudo /etc/init.d/networking restart Now the last step didn't report error, ifconfig shows the ip address was set, but this server cannot connect to outside world, ping google.com and reports "unknown host google.com". Any ideas?

  Read the article

• Testing Tomcat with Virtual Hosts

  - by Marty Pitt

  I'm trying to test Tomcat virtual hosts on my dev machine (windows 7/Tomcat 6). I'd like to have requests for localhost, test1.localhost and test2.localhost all route through to the same tomcat instance. I've edited my hosts file to look as follows: 127.0.0.1 localhost ::1 localhost 127.0.0.1 test1.localhost 127.0.0.1 test2.localhost And added modified the Engine in server.xml as follows: <Engine defaultHost="localhost" name="Catalina"> <Realm className="org.apache.catalina.realm.UserDatabaseRealm" resourceName="UserDatabase" /> <Host appBase="webapps" autoDeploy="true" name="localhost" unpackWARs="true" xmlNamespaceAware="false" xmlValidation="false"> <Alias>test1.localhost</Alias> <Alias>test2.localhost</Alias> </Host> </Engine> However, I'm getting a 404 when hitting test1.localhost:8080/myWebApp, although localhost:8080/myWebApp works fine. I can ping test1.localhost fine. What have I missed?

  Read the article

• How to use iSCSI inside HyperV VM?

  - by William

  I have 2 Dell R710 servers (intended to set up HyperV cluster) and a MD3000i SAN set up: Server1/Server2: NIC 1: connected to company LAN NIC 2: crossover to the other server's NIC 2 NIC 3: crossover to iSCSI port of SAN controller 1 NIC 4: crossover to iSCSI port of SAN controller 2 I have both servers setup as diskless servers with iSCSI boot from SAN without problem. But how can I access iSCSI from within the VM such that I can set up clustering inbetween the VMs? I can ping from the host to the SAN but found that NIC3/4 cannot be used for virtual network in HyperV? What am I doing wrong?

  Read the article

• Problem with Jumbo Frames

  - by Spookyone

  Hello, I am trying to set up jumbo frames on my gigabit home LAN but no luck so far. My setup is: * D-Link DIR-655 router, HW Revision A3, Firmware 1.21 EU * Synology DS107+, Firmware 3.0-1337 * Laptop w/ Win7 x64, external PCIx NIC managed by "Generic Marvel Yukon 88E8053 based Ethernet Controller" The router is supposed to support jumbo frames but doesn't feature any relevant setting. I set the Jumbo Packet value to 9000 on both the NIC and the Synobox but it doesn't work, ping -f -l 8972 says "Packet needs to be fragmented but DF set". Is there any other setting I overlooked, the DIR-655 doesn't actually support jumbo frames, or what else could be the problem?

  Read the article

• Tool to monitor file size, file existence, parse xml, etc

  - by Artur Carvalho

  I'm trying to find some tool that helps me monitor several things. What are some requirements: Shows results on a web page. Checks existence of files/folders Checks sizes of files/folders Can parse xml files Can have several status depending if it's for instance, after 9pm Ping workstations/Servers to ensure they are on or off create daily/weekly/monthly reports (pdf, html, csv) show daily/weekly/monthly scheduled tasks check if specific users are logged in a machine check which users are logged in in a machine I've looked into some solutions but could not find what I wanted. Usually tools like nagios are more focused in servers, and spiceworks is not so specific. At this point I'm using a little powershell script that does several of these items, but before losing more time probably reinventing the wheel, what tools are out there? Thank you in advance.

  Read the article

• Single-port 2600 router with 2900XL switch

  - by Slava Maslennikov

  I have a setup, where the single port 2600 router is in port 0/2 in the switch, outside network is on port 0/1, and the rest (0/3-0/24) should be clients for the second network that would be managed by the 2600 router. I configured everything with two VLANs: 100 for outside (0/2-0/24), 200 for inside (0/1-0/2). 0/2 is a trunk port for the two VLANs. The issue that came about is that I can't have two VLANs on at once: software doesn't allow it. Now, I can ping the outside network devices (172.16.7.1, 172.16.7.103), and even google (8.8.8.8) from the router, but not the switch. Devices on connected get a DHCP lease properly but can't ping outside the network, just the router - 172.17.7.1 and the switch itself, 172.17.7.7. The configuration for both the router and the switch are here, as well as below. Router: rt.throom#sho run Building configuration... Current configuration : 1015 bytes ! version 12.1 no service single-slot-reload-enable service timestamps debug uptime service timestamps log uptime no service password-encryption ! hostname rt.throom ! enable password To053cret ! ! ! ! ! no ip subnet-zero ip dhcp excluded-address 172.17.7.1 172.17.7.2 ip dhcp excluded-address 172.17.7.3 172.17.7.4 ip dhcp excluded-address 172.17.7.5 ! ip dhcp pool VLAN200 network 172.17.7.0 255.255.255.0 default-router 172.17.7.1 dns-server 8.8.8.8 ! ip audit notify log ip audit po max-events 100 ! ! ! ! ! ! ! interface Ethernet0/0 no ip address ! interface Ethernet0/0.100 encapsulation dot1Q 100 ip address 172.16.7.15 255.255.255.0 ip nat outside ! interface Ethernet0/0.200 encapsulation dot1Q 200 ip address 172.17.7.1 255.255.255.0 ip nat inside ! router eigrp 20 network 172.16.0.0 network 172.17.0.0 no auto-summary no eigrp log-neighbor-changes ! no ip classless no ip http server ! access-list 1 permit 172.17.7.0 0.0.0.255 ! ! line con 0 line aux 0 line vty 0 4 login ! end Switch: sw.throom#sho run Building configuration... Current configuration: ! version 11.2 no service pad no service udp-small-servers no service tcp-small-servers ! hostname sw.throom ! enable password Oh5053cret ! ! no spanning-tree vlan 100 no spanning-tree vlan 200 ip subnet-zero ! ! interface VLAN1 no ip address no ip route-cache ! interface FastEthernet0/1 switchport access vlan 100 spanning-tree portfast ! interface FastEthernet0/2 switchport trunk encapsulation dot1q switchport mode trunk ! interface FastEthernet0/3 switchport access vlan 200 spanning-tree portfast ! interface FastEthernet0/4 switchport access vlan 200 spanning-tree portfast ! interface FastEthernet0/5 switchport access vlan 200 spanning-tree portfast ! interface FastEthernet0/6 switchport access vlan 200 spanning-tree portfast ! interface FastEthernet0/7 switchport access vlan 200 spanning-tree portfast ! interface FastEthernet0/8 switchport access vlan 200 spanning-tree portfast ! interface FastEthernet0/9 switchport access vlan 200 spanning-tree portfast ! interface FastEthernet0/10 switchport access vlan 200 spanning-tree portfast ! interface FastEthernet0/11 switchport access vlan 200 spanning-tree portfast ! interface FastEthernet0/12 switchport access vlan 200 spanning-tree portfast ! interface FastEthernet0/13 switchport access vlan 200 spanning-tree portfast ! interface FastEthernet0/14 switchport access vlan 200 spanning-tree portfast ! interface FastEthernet0/15 switchport access vlan 200 spanning-tree portfast ! interface FastEthernet0/16 switchport access vlan 200 spanning-tree portfast ! interface FastEthernet0/17 switchport access vlan 200 spanning-tree portfast ! interface FastEthernet0/18 switchport access vlan 200 spanning-tree portfast ! interface FastEthernet0/19 switchport access vlan 200 spanning-tree portfast ! interface FastEthernet0/20 switchport access vlan 200 spanning-tree portfast ! interface FastEthernet0/21 switchport access vlan 200 spanning-tree portfast ! interface FastEthernet0/22 switchport access vlan 200 spanning-tree portfast ! interface FastEthernet0/23 switchport access vlan 200 spanning-tree portfast ! interface FastEthernet0/24 switchport access vlan 200 spanning-tree portfast ! ! line con 0 stopbits 1 line vty 0 4 login line vty 5 9 login ! end sho ip route gives: Gateway of last resort is 172.16.7.1 to network 0.0.0.0 172.17.0.0/24 is subnetted, 1 subnets C 172.17.7.0 is directly connected, Ethernet0/0.200 172.16.0.0/24 is subnetted, 1 subnets C 172.16.7.0 is directly connected, Ethernet0/0.100 S* 0.0.0.0/0 [1/0] via 172.16.7.1

  Read the article

• Can't connect to Apple Time Capsule in home network using Home Plugs from Win 7 Machine

  - by Eugene

  I have the following home network setup with subnet 255.255.255.0 but recently moved my time capsule to a different location when I added a third Home Plug and can no longer ping or map a network drive to it from the Windows 7 Machine. However using Airport Utility on the Windows 7 machine I can manually configure the Time Capsule. Using a Macbook on WIFI Network 1 or 2 - I can backup to the time capsule, so its accessible via both the router wifi network and the time capsule wifi network. The Time Capsule is set to BRIDGE function - ie no NAT or DHCP server enabled. Any bright sparks out there that can help diagnose the problem? Router (192.168.1.254) WIFI Network 1 | | |---- Home Plug one |---- Home Plug Two | |---- Computer A Windows 7 (192.168.1.160) | |---- Printer (192.168.1.69) |---- Home Plug Three | |---- Apple Time Capsule (192.168.1.150) WIFI Network 2 |---- Smart TV (192.168.1.70) | |---- Apple TV (192.168.1.4)

  Read the article

• Set up Glassfish connection pool to talk to a database on a Ubuntu VPS

  - by Harry Pham

  On my Ubuntu VPS, i have a mysql server running and a Glassfish 3.0.1 Application Server running. And I am having a hard to have my GF successfully ping the database. Here is my GF set up Assume: x.y.z.t is the ip of my VPS Resource Type: javax.sql.ConnectionPoolDataSource User: root DatabaseName: scholar Url: jdbc:mysql://x.y.z.t:3306/scholar URL: jdbc:mysql://x.y.z.t:3306/scholar Password: xxxx PortNumber: 3306 ServerName: x.y.z.t Inside my glassfish3/glassfish/lib, I have my mysql-connector-java-5.1.13-bin.jar Inside the database, table mysql here is the result of the query select User, Host from user; +------------------+-----------+ | User | Host | +------------------+-----------+ | root | 127.0.0.1 | | debian-sys-maint | localhost | | root | localhost | | root | yunaeyes | +------------------+-----------+ Now from my machine, if I try to connect to this db via mysql browser (mysql client software), well I cant. Well from the table above, seem like it only allow localhost to connect to this db. Keep in mind that both my db and my GF are on the same VPS. Please help

  Read the article

• Cannot Access a Shared Folder Using Windows 2008

  - by peter

  Hi All, I have a NAS drive, and this is sharing some folders. I cannot access those folders from a windows 2008 machine which is on the network. The are both connected to the same network switch. e.g. if I go like this, \\server\ or \\server\folder I get the message 'windows cannot access \\server check the spelling, click diagnose' etc. Error code: 0x80004005 The thing is that I can connect to this shared drive from a windows 7 laptop connected wirelessly to the same network. I can ping the server from windows 2008, but only if I use the IP address, not the server name.

  Read the article

• Windows 7 and XP Networking

  - by David-Zazeski

  I'm trying to setup a home network between a windows 7 and windows xp machine. I have a small hub. My XP computer has a manually assigned IP address (192.168.0.10) and I set my Windows 7 machine to have a manually assigned IP address (192.168.0.15). The XP computer works, but the Windows 7 machine does not see the network. It says that there is no connectivity. Ping does not work from either machine. Does anyone have any suggestions?

  Read the article

• Not able to access other machines on network

  - by TheVillageIdiot

  Hi I'm running Windows 7 Enterprise (32bit) on my laptop. For some time I'm not able to access other machines using \\192.168.xxx.xxx. I've installed VM Ware player on my machine few days back but I don't remember if it happened just after that or there is some other reason behind it. EDIT:- I've disabled VMWare Bridge Protocol but still no effect. Please help me. PS:- I've used both wireless and wired networks. Network sharing is enabled and I can ping other machines but cannot access network shares. I get following message: \\xxx.xxx.xxx.xxx You might not have permission to use this network resource. Contact the administrator of this server to find out if you have acess permissions. The request is not supported. EDIT (2):- Network Discovery, File and Printer Sharing, Folder sharing are all on.

  Read the article

< Previous Page | 61 62 63 64 65 66 67 68 69 70 71 72  | Next Page >