Search Results

Search found 2219 results on 89 pages for 'odd parity'.

Page 62/89 | < Previous Page | 58 59 60 61 62 63 64 65 66 67 68 69  | Next Page >

• Display errors using VMWare Player and Remote Desktop on Windows XP

  - by Tim

  I've come up against a weird display issue that I can't seem to find any "fix" for. When I first boot up my computer, everything behaves normally. If I start to use VMWare Player and/or Remote Desktop, my desktop starts having some odd video issues. The frames for some windows aren't drawn at all, if I move windows around rapidly, the area under where the window used to be isn't cleared (still shows artifacts of the content of the window), etc. In some cases, the minimize / restore / maximize buttons aren't drawn (but are click-able if you can guess where they are). I've tried the usual stuff - current drivers all around, using a single monitor, etc.. none of it seems to have any bearing. If I try to disable hardware acceleration, it tends to crash the computer. As I said earlier, it's running Windows XP, dual monitors, an NVidia en8400GS video card, asus p7p55d motherboard. Not sure what other pertinent details are needed. I would appreciate any help or suggestions!

  Read the article

• User unable to delete folder / files "File in use by another user" Server 2003

  - by Az

  I am administering a standalone Windows 2003 Terminal Server with no domain membership. Occasionally (about once a week or so) a user will attempt to delete a sub-folder in a Shared folder and gets denied with "File in use by another user". I tried checking the shared folder snap-in and that folder is not open. She has full control and is the owner of the folder as well. I even checked in "Effective permissions" for some of the folders / files she cant delete and she truly has full control. I am able to delete the folder as Administrator with no problem. Another odd thing, she can delete the files IN the folder most of the time (this issue happens on both folders and files in the share). Sometimes merely waiting a day or two will allow her to delete the folder or files. I am curious as to why she gets the message that it is in use as creator/owner with full control yet I don't get it simply as a member of the Admin group. If anyone out there has any ideas I'd love to hear them! THANK YOU.

  Read the article

• Slower/cached Linux file system required

  - by Chopper3

  I know it sounds odd but I need a slower or cached filesystem. I have a lot of firewalls that are syslog'ing their data to a pair of Linux VMs which write these files to their 'local' (actually FC SAN attached) ext3-formatted disks and also forward the messages to our Splunk servers. The problem is that the syslog server is writing these syslog messages as hundreds, sometimes thousands, of tiny ~4k writes per second back to our FC SAN - which can handle this workload right now but our FW traffic's going to be growing by at least a factor of 5000% (really) in coming months and that'll be a pain for the SAN, I want to fix the root cause before it's a problem. So I need some help figuring out a way of getting these writes cached or held-off in some way from the 'physical' disks so that the VMs fire off larger, but less frequent, writes - there's no way of avoiding these writes but there's no need for it to do so many tiny ones. I've looked at the various ext3 options, setting noatime and nodiratime but that's not made much of a dent in the problem. Obviously I'm investigating other file systems but thought I'd throw this out in case others have the same problem in the future. Oh and I can't just forward these messages to Splunk, our firewall team insist they're in their original format for diag purposes.

  Read the article

• Embedded Windows XP

  - by Kyle

  My company acquired a brake press for bending large structural steel plates. We received it second hand and it came with an embedded copy of windows XP. Now for the part that's driving me nuts: plug and play has been turned off, also accessibility options has been disabled. What does this mean for me? Keyboards will not work! Nothing that plugs into a USB port will work and it does not have a CD ROM drive. I have tried to turn on plug and play using the on screen keyboard but it is not there since accessibility options is turned off. I would just get an updated copy of the the embedded OS but they come from Sweden and are extremely expensive. I assume there has got to be a way to get a USB devices to work. We need to get a wifi adapter on it so I can use team viewer and remotely configure it for our needs. Things to keep in mind: There is no keyboard so everything has to be done with the mouse There is no PS2 port for a keyboard just a mouse. Odd. I am 5 states away from this location and have been working with a tech who is physically installing the machine. System 32 seems to be missing A LOT of files, the tech told me there is only 8 folders in there and no other files (I don't even understand how Windows is running like this). If anyone has ANY ideas I would appreciate it, I am unsure where to go from here.

  Read the article

• Why is my Toshiba Satellite L675D laptop not connecting to my HD TV using an HDMI cord?

  - by Akasha Eyre

  I'm having a problem connecting my Toshiba Satellite L675 laptop to my Samsung HD TV. I've done it before using an HDMI cord but now, for some odd reason, it's not connecting at all. My computer screen before would go completely black for a second & then come back & (with it being attached to the TV with the HDMI cord & it being on the proper channel) it would make a sound, come on & work beautifully. Now, I try hooking it up & it doesn't do anything. No black screen, no sound. The TV screen just says there's no connection & that I need to check out the power source. I'm still checking around, trying to find out if there's a virus in my computer (since my dad & I have the same computer & he can connect his to the TV with no problems), or if I deleted something that had to do with the connection. I've tried turning my computer off & letting it sit for a while, I've tried checking out other websites & have come up with nothing.

  Read the article

• Linux iptables / conntrack performance issue

  - by tim

  I have a test-setup in the lab with 4 machines: 2 old P4 machines (t1, t2) 1 Xeon 5420 DP 2.5 GHz 8 GB RAM (t3) Intel e1000 1 Xeon 5420 DP 2.5 GHz 8 GB RAM (t4) Intel e1000 to test linux firewall performance since we got bitten by a number of syn-flood attacks in the last months. All machines run Ubuntu 12.04 64bit. t1, t2, t3 are interconnected through an 1GB/s switch, t4 is connected to t3 via an extra interface. So t3 simulates the firewall, t4 is the target, t1,t2 play the attackers generating a packetstorm thorugh (192.168.4.199 is t4): hping3 -I eth1 --rand-source --syn --flood 192.168.4.199 -p 80 t4 drops all incoming packets to avoid confusion with gateways, performance issues of t4 etc. I watch the packet stats in iptraf. I have configured the firewall (t3) as follows: stock 3.2.0-31-generic #50-Ubuntu SMP kernel rhash_entries=33554432 as kernel parameter sysctl as follows: net.ipv4.ip_forward = 1 net.ipv4.route.gc_elasticity = 2 net.ipv4.route.gc_timeout = 1 net.ipv4.route.gc_interval = 5 net.ipv4.route.gc_min_interval_ms = 500 net.ipv4.route.gc_thresh = 2000000 net.ipv4.route.max_size = 20000000 (I have tweaked a lot to keep t3 running when t1+t2 are sending as many packets as possible). The result of this efforts are somewhat odd: t1+t2 manage to send each about 200k packets/s. t4 in the best case sees aroung 200k in total so half of the packets are lost. t3 is nearly unusable on console though packets are flowing through it (high numbers of soft-irqs) the route cache garbage collector is no way near to being predictable and in the default setting overwhelmed by very few packets/s (<50k packets/s) activating stateful iptables rules makes the packet rate arriving on t4 drop to around 100k packets/s, efectively losing more than 75% of the packets And this - here is my main concern - with two old P4 machines sending as many packets as they can - which means nearly everyone on the net should be capable of this. So here goes my question: Did I overlook some importand point in the config or in my test setup? Are there any alternatives for building firewall system especially on smp systems?

  Read the article

• InstallShield or Windows installer corrupted

  - by Bobby S

  Just recently I've been unable to install any software on my Windows 7 machine. Anything that uses InstallShield or the Windows installer will just hang or give a weird error. I noticed there will be many duplicate isbew64.exe processes (like 25) that launch and then just sit there or else a lot of msiexec.exe *32 processes, depending on what I'm trying to install. One piece of software specifically is the Logitech Harmony software. It gives me an *is_string_not_defined* error, saying c:\program files (x86)\:\ the filename, directory name, or volume label syntax is incorrect. The other thing I was trying to install was Battlefield: Bad Company 2, and that just hangs as well, and then just leaves all the Windows installer processes running in the background after I quit the install process. Very odd. I've checked well and googled these issues, it doesn't appear to be any sort of malware issue. I feel like it's related to some kind of corrupted installer application. I've rebooted, deleted the InstallShield folder in program files/common files as some places online suggested but to no avail. I have no idea what to do, any ideas?

  Read the article

• php-cgi.exe Taking out server, multiple running

  - by Alex

  I have been using ZendServer CE for over a year and have never had a problem. Recently, about a week or two ago I have found my server to be acting up and even causing RDP to be un-connectable. After some looking around I have 20, 25, 30+ php-cgi.exe running. With my IIS7 service starting with Windows once my server started all these php-cgi.exe would start running (even though the limit is 10) and I could not even connect to it. After disabling the Web Server as startup which stops php-cgi.exe from running the server runs flawless, like it always has. As soon as I run the web server all these odd issues start. I have a post over at Zend http://forums.zend.com/viewtopic.php?f=44&t=41043&p=95133 where I was told to update my Zend install. After doing so this issue has not gone away. Even running 1 php-cgi.exe (somehow 2 start anyway) the server begins to go silly. The first issue I find myself with running php-cgi.exe is that Windows Services, weather be stock or using FireDaemon begin to lag, slow start, crash, etc. If anyone can help me with this I would GREATLY appreciate it. At this time I am forced to look for a alternative to running PHP other than cgi as it simply takes out the whole box. On another note, I run this same version of Zend on a similar server with no issues. Starting to think its a IIS issue. (UPDATE) Installed newest version of PHP, separate from Zend, same issue. Server Specs: Intel Xeon Quad w HT Nehlam Based 24GB DDR3 1333 2x1TB Raid Mirror OS 2x1TB Raid Mirror (Other) 4x2TB Raid 5 (Storage) Server 2008 R2

  Read the article

• Batch-Remove Specific Text from Photo Descriptions

  - by David

  I've recently upgraded to iPhoto '11 (couldn't resist the pricing on the new app store) and as I'm adding more meta-data to my library and generally organizing things (places, faces, etc... I hadn't upgraded since '08) I've noticed something odd in my photos. Every photo in my library has a description (though many are short), but it would appear that somehow the description of one of the photos has been appended to many. I don't know if maybe I accidentally screwed up a batch change at some point in the past, or if the library upgrade somehow messed up, or what else may have happened. But what I need to do is fix these somehow. Now, manually editing is something of a daunting task. Within a library of 21,248 photos, 18,858 of them have this additional text. The one thing I do have going for me is that it's a specific string. If there's a way to "remove this string from everywhere in the library without removing the rest of any given description" then that would be perfect. Is there anything I can do like this? Maybe even manually editing a library file in a text editor? (Would that break anything else in iPhoto if its library was edited outside of the application, even while it's not running?) Does anybody have any ideas?

  Read the article

• Windows preventing running of Telnet client

  - by palswim

  At first, I had issues because Windows 7 doesn't install the Telnet client by default (also, SuperUser has a thread). So, after installing it (and restarting, like Windows asked, though completely unnecessary), I opened a command prompt, and went to run my new Telnet program. I enter telnet, and receive: C:\Users\[USER]>telnet 'telnet' is not recognized as an internal or external command, operable program or batch file. "That's odd," I think to myself. So, in Windows explorer, I navigate to \Windows\System32 and see telnet.exe sitting in that folder. If I double-click on the executable file, the Telnet command prompt opens for me without a problem. So, I return to my Windows Command Prompt, and enter: C:\Users\[USER]>\Windows\System32\telnet.exe '\Windows\System32\telnet.exe' is not recognized as an internal or external command, operable program or batch file. And then (grep comes from cygwin): C:\Users\ryan\Desktop>dir \Windows\System32 | grep telnet Nothing. I've disabled UAC and have no idea why my Command Prompt is lying to me. Anyone experience something similar? To recap: In Windows 7, I have installed Telnet and can see it in my System32 folder, but cannot run it via a Command Prompt.

  Read the article

• Ubuntu 10.10 - PC shutdown before boot shortly after BIOS loads

  - by clem

  Hi - Since installing Ubuntu 10.10 from Karmic I've started getting problems with starting up the PC. I've done a complete wipe (Boot and Nuke) of the hard drive and reinstalled Ubuntu 10.10 but the problem still occurs. There is no dual boot on the PC, just Ubuntu. Here is the problem: Each morning, when I turn the PC on from being off overnight, the PC starts up and loads the BIOS. I get the following message : "Verifying DMI Pool Data... K8 NPT Data Change...Update New Data to DMI!....... Then poof the computer shuts off. However, after switching the computer back on around 6 or 7 times after it's turned itself off, it will eventually boot up without any problem. Also, once up and running for a while, I can shutdown and restart the PC first time, without any issues. I have also noticed a problem with the USB mouse being recognised and once I finally get the computer booted up, I need to unplug and then plug the mouse back in to get it working. I've opened the PC up and checked the connections (cables, cards and memory) and it all seems fine. The main issue with troubleshooting this problem is I cannot test any suggestions or fixes until the next morning because once the computer is up and running it will remain so! I do not leave the computer on overnight to save energy. So.. is this a hardware / boot software issue? This is a very odd problem and I have googled to no avail. Any suggestions? Many thanks Clem

  Read the article

• Windows Displays Double the Actual Installed Physical Memory

  - by Andrew Barber

  I have a server I've installed Windows Web 2008 R2 on, which is reporting that I have double the physical memory installed as is actually the case. In msinfo32 "Installed Physical Memory" shows as 2x what ever the actual installed amount is, though "Total Physical Memory" shows the correct amount. The "System" info window shows installed memory as 2x, with the correct amount in parenthesis listed as the "usable" amount). This server mistakenly had Windows Web 2008 (32-bit) installed on it just previously, and that OS also reported the same faulty information as Win2K8R2 is reporting. BIOS reports the correct amount, memtest was run on this server before installation, and a previous Windows 2000 instance installed on this system also reported the correct amount, as I recall. Server operation seems to be fine as well (it's only trying to use the correct amount of memory). The server is a generic pizzabox running on a SuperMicro X6DVL-EG with dual Xeon-3.2's. Memory installed are 4 matching mt18vddf12872g-335c3 sticks (1GB pc2700 DDR ECC REG cl2.5) This behavior occurs whether two or all four are installed. So, has anyone seen something like this before? Have any idea about what's causing it, and how I should be concerned about it? Everything else seems good so far, and I'll be upgrading the memory before putting the server into service, but I don't want to spend too much time/money/effort on the server if it's got something odd going wrong here. UPDATE: There was a question I ran into regarding memory sparing in the BIOS and a possible (buggy) effect thereof; however, flipping that bit back and forth in the BIOS revealed that isn't the issue. Still flummoxed a bit about this one, though I still have seen no negative impacts. Post-Answer Update (January 13, 2011): Upgrading the system with new, larger memory has fixed this issue.

  Read the article

• Windows 7 not booting after failed SRT (SSD caching) install

  - by david

  This is a fairly new computer, only about a month old. i7 2700k, z68 motherboard, with a 1.5tb WD black HD, and a 128gb crucial M4 ssd. I followed the instructions for setting up ssd caching, the SATA controller was set to RAID, I installed the intel software and enabled acceleration and it said everything went fine. But when I went to reboot, I received the lovely "Reboot and Select proper Boot device" error message. I checked the bios, and it was booting from the correct HD (I tried the only other option anyway just in case, it was the ~50 odd gb of unformatted space left on the SSD) AFter that I entered the raid until (ctrl-i at boot) and removed the acceleration and deleted the raid array (because it was being used as a cache this was non destructive) Still no boot. So I reinstalled win7 directly on the SSD, booted, and checked the HDD to make sure it hadn't been wiped. It hadn't, all the files were still there, including all the windows stuff. I backed up my data to an external drive just in case, but I'd really like to get this install booting again. I trawled the webs a bit, and have tried entering recovery mode and using the bootrec.exe and bootsect.exe to fix it, but to be honest I'm not sure what I'm doing with those. My question is basically: How do I make my harddrive bootable again?

  Read the article

• Windows 7 Sharing issue on RAID 5 Array(s)

  - by K.A.I.N

  Greetings all, I'm having a very odd error with a windows 7 ultimate x64 system. The network system setup is as follows: 2x XP Pro 32 Bit machines 1x Vista ultimate x64 machine 2x Windows 7 x64 Ultimate machines all chained into 1x 16 port netgear prosafe gigabit switch, the windows 7 & vista machines are duplexed. Also there is a router (netgear Rangemax) chained off the switch I am basically using one of the windows 7 machines to host storage & stream media to other machines. To this end i have put 2x 3tb hardware RAID 5 arrays in it and assorted other spare disks which i have shared the roots of. The unusual problems start when i am getting Access denied, Please contact administrator for permission blah blah blah when trying to access both of the RAID 5 arrays but not the other stand alones. I have checked the permission settings, i have added everyone to the read permission for the root, i have tried moving things into sub directories then sharing them. I have tried various setting combinations in HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Lsa and always the same. I have tried flushing caches all round, disabling and re-enabling shares & sharing after restart as well as several other things & the result is always the same... No problem on individual drives but access denied on both the RAID arrays from both XP & Vista & Windows 7 machines. One interesting quirk that may lead to an answer is that there is no "offline status" information regarding the folders when you select the RAID 5s from a windows 7 machine yet there is on the normal drives which say they are online. It is as if the raid is present but turned off or spun down but as far as i was aware windows will spin an array back up on network request and on the machine itself the drives seem to be online and can be accessed. Have to admit this has me stumped. Any suggestions anyone? Thanks in advance for any fellow geek assistance. K.A.I.N

  Read the article

• IIS Web Farm Framework servers are automatically set to "unavailable" even when they are healthy... And they never return to the available state!

  - by JohannesH

  I have 2 web farm configurations, one with 2 member servers and one with 3 member servers. I have health monitoring set up on both farms and the monitoring tool reports all servers as being healthy. However after a while all the servers are marked as being "Unavailable" and "Healthy" in the "Monitoring and Management" screen (in the "Servers" screen they are all listed with "Yes" in the "Ready for Load Balancing" column). Viewing the event log on both the web farm controller or any of farm servers doesn't reveal anything interesting. there are no warnings or errors in the period where the servers became unavailable. There are a couple of informational events about the worker process getting shut down due to inactivity but I don't hope this is the cause since that would mean that the farms will die during the night when the load is low. Am I missing something? EDIT: Btw, I think its very odd that the application pool shuts down on the servers since the health monitoring system is polling an aspx page on each server. Shouldn't that keep them going? EDIT2: Now I've also experienced this problem with the RTW version of Web Farm Framework 2.

  Read the article

• JBoss database connection pool configuration

  - by Qben

  I am facing an connection pool issue in my clustered JBoss installation. From time to time one of my connection pools will hit the roof and I get a lot of these in my logfile. java.sql.SQLException: No ManagedConnections available within configured blocking timeout ( 30000 [ms] ); The odd thing is that I can see in the JMX console that the ConnectionCount hit the roof, but at the same time InUseConnectionCount is often quite small. The problem will resolve itself after a couple of minutes but during recovery phase my application will not work (for obvious reasons). The question is if this indicate an error in the configured timeouts of the connections (I pretty much use defaults), or if my pool is simply too small to handle the peaks. Under normal operation I would say I use ~40% of the configured max number of connections. The reason I just don't increase the max number of connection is that if I actually used up all connections I suspect that InUseConnectionCount would hit the roof. Hence I suspect I might have more issues than just a too small pool size. Maybe InUseConnectionCount has decreased at the time I check jmx-console and it actually do hit the roof? I tend to collect data every second minute. Any hints are more than welcome.

  Read the article

• Intranet machines refuse to talk anymore

  - by ashes999

  I have two machines on the local intranet. They used to be able to talk to each other (ping, share files, etc.). Both are not successfully connected to the internet. The problem machine (lets call it test machine) can't talk to my main machine. The test machine can ping other machines on the intranet (at least one of my coworkers), but not mine. Odd. When I try to ping it from my machine, by machine name, I get Destination host unreachable. Both machines are on the intranet, with the network configured as Work Both machines have Windows Firewall disabled temporarily Both machines can talk to the internet (Google, SO, etc.) Neither machine can ping the other I need help resolving this. What I really want to achieve, is to remote into the test machine from my main machine, like I used to be able to do a few weeks ago. Some notes: Tried arp -a on both machines. I don't see the other machine's IP listed. Both machines have stable IPs; neither seems to have an IP conflict The configuration under ipconfig /all on my main machine mathces my coworker's machine. The test machine can ping his machine, but not my machine. The target machine times out trying to ping the main machine; the main machine gives me Destination host unreachable. I have rebooted both machines (several times) to no avail I have /release and /renewed both machines several times

  Read the article

• Server taking too long to respond error

  - by DCJones

  Hi, This is my first post on serverFault and my first entry in to web server configuration. The hardware and software. CPU: GenuineIntel, Intel(R) Core(TM)2 Duo CPU E7500 @ 2.93GHz OS: Linux 2.6.18-128.el5 Memory: 2Gb Background. I am running a small database (MySQL), around 1000 records with each record containing 44 fields. At the start of each day “00:01” the tables are cleared and populated with fresh data. The are 10 remote PCs all running Winodws XP and Firefox internet browser. All remote PC’s are connected to the internet using a min 4Gb broadband connection. Each remote PC runs a URL which displays a dynamic page of data which is refreshed every 20 seconds. This is a continual process 24 hours a day. I problem I am having is on odd occasions throughout the day the PC browser error with “Server taking too long to respond error”. What I am trying to find our is if I have the correct setting in the httpd.conf file on the server. Any help or advice anyone can provide would be very helpful. Best regards Dereck Server config file: httpd.conf ServerRoot "/etc/httpd" PidFile run/httpd.pid Timeout 120 KeepAlive On MaxKeepAliveRequests 200 KeepAliveTimeout 5 StartServers 8 MinSpareServers 5 MaxSpareServers 20 ServerLimit 256 MaxClients 254 MaxRequestsPerChild 4000 StartServers 2 MaxClients 150 MinSpareThreads 25 MaxSpareThreads 150 ThreadsPerChild 25 MaxRequestsPerChild 0

  Read the article

• How to fix Windows 7 device removal notification loop

  - by Barry Kelly

  Bit of an odd one this. One of our PCs is getting caught in a loop some time after being turned on, usually after a USB storage device has been attached - sometimes an iPod, sometimes a GPS. Specifically, Windows Explorer starts showing a drive icon and letter (E:, as of right now) for the System partition (the small hidden one at the start of the boot drive). Then, the icon disappears. Then it reappears again. And disappears. It does this very quickly, at what looks like maybe 50 times a second. CPU usage in this loop is also very high; averages about 66%. This machine has an i7 920 CPU, which is quad core with hyperthreading; so this usage rate works out to about 5 100% busy threads, along with whatever normal idle load is (particularly Task Manager itself). Inspecting with Process Explorer shows that the device removal notification infrastructure has gone berserk. The threads in system service processes (i.e. apart from Windows Explorer) which are using all the CPU power relate to device notification. The Disk Management MMC snap-in also fails to run when the loop starts. The only way to break the loop, it seems, is to reboot the machine. Anyone seen anything similar to this, and know of a way to fix it? Machine details: Windows 7 x64, fully patched i7 920, 12GB RAM Intel SSD 80GB (X25-M, I believe; not G2) 2TB 5.2K disk for bulk storage AMD HD 5870 Further hardware details await. I'm going to go through and update all drivers I can find.

  Read the article

• Exchange on SBS2003 not receiving mail, but sending via telnet works

  - by YDdraigLas

  Last week we had a problem on our SBS2003 server where our external connection dropped out and I was only able to restore it by running netsh winsock reset catalog and netsh int ip reset. Thinking all was well, I went home for the weekend and came in today to find that we haven't received any external emails since before the original problems occurred. There are plenty of examples of this on the internet, usually to do with a firewall issue, but the odd thing here is that when I connect using telnet I can send an email and it goes straight through and into my inbox. When I send an email from Gmail or Hotmail nothing comes through at all. Internal emails are also unaffected, as are outgoing emails. There have also been a couple of emails that have come through for other users, both out-of-office replies, if that's relevant. I've run the CEICW several times, checked all the NIC settings, but no joy. Before I give up trying to fix this and reinstall the whole server, has anyone come across this problem before? I have only found fleeting references to this in previous searches and no real answers. Any advice gratefully received.

  Read the article

• Games on windows 8 in bootcamp lag even on lowest graphics

  - by Jackson Gariety

  I've been playing Crysis 2 and Skyrim on my Retina MacBookPro (10,1) for months now. The two games used to run super smoothly even on nearly maxed out settings. This laptop has an Nvidia GeForce GT 650M graphics card inside, it runs great. But I recently replaced my Windows 8 consumer preview with the retail copy, and since then, 3D games lag in this odd way, no matter what the graphics settings. Every second Skyrim and Crysis alternates between running smoothly and lagging. It's a cyclical lag that comes and goes like clockwork. I can turn the graphics down to 800x600 with no antialiasing and low texture quality, and it runs much smoother on the "up" motion of the cycle, but every second it moves back into this lag spike. I've tried installing beta graphics drivers, re installing the operating system, re installing the bootcamp support software, and freeing up space (I have about 20 GB free). I can't figure out what suddenly caused this other than some obscure difference between the consumer preview and the retail version. What can I try? Is my video card failing? Are there some other drivers I can install? This isn't normal lag from maxing out the card, it

  Read the article

• What is making iTunes stop playing when my computer idles?

  - by OwenP

  I've got a rare weekend with nothing to do, so I'm getting some housework done. I have iTunes playing for some background noise. Every 20 minutes or so, it just stops playing; if I move the mouse it starts again. I'm on Windows 7 64-bit. My power settings have my monitor turning off at 10 minutes and hard drives at 20. Both sleep and hibernate are disabled. "Aha!", you say, "Clearly when the hard drive is turned off iTunes is stopping!" Not so. I fiddled with the settings and changed them to make the hard drive sleep in 5 minutes, and iTunes kept playing for the 7 minutes I watched it. I'm currently trying to see what happens if I set the hard drive to never turn off, but I'd prefer to leave it at 20 minutes to save minor amounts of energy. (Edit: I just set it to 240 minutes, and it stopped at 20 minutes. It seems tied to when the monitor turns off; that seems odd and I'm testing that now.) What other settings could be the culprit?

  Read the article

• MicroSD card getting corrupted for no good reason

  - by ChaosR

  I recently bought an MicroSD card online. It's a Sandisk 16GB class 2. However, it has a nasty problem. Every time I fill it with my data, the fat tables get corrupted. I've tried reformatting it, blanking it, doesn't seem to solve the problem. I have tried windows and linux (ubuntu), both have the problem. I've used my usb microsd readers, and even tried putting it in my phone and putting data on it from there. All have this problem. Now the really odd thing is, besides the corrupted file tables, no programs can find anything wrong with the hardware. I've tried both chkdisk and "badblocks -w", neither give any type of error. Now I don't know if the actual data gets corrupted, or if its just filesystem tables. What happens is that one or more folders start showing a load of chinese-charred (random UTF8 symbols I suppose) folders and files, and it is impossible to do anything with those. All the other data (outside of the corrupted folders) seems fine. I've tried to test it, and the problem doesn't seem to show up until I fill the disk upto about 3~4GB. After that I can still access the data. But as soon as I eject/safely remove/unmount it, the bad things happen somehow. Next time I plug it in, the folders I most recently wrote to (but sometimes also the folders I wrote the time before last time to) are all gibberish. Does anybody have any clue what might be going on here?

  Read the article

• vim: mapping <control-j> key

  - by bhh1988

  When I'm in insert mode, I sometimes want to be able to move around without using the arrow keys, and without having to go back into normal mode. So in my vimrc I've set up key bindings to do this: imap <C-l> <right> imap <C-h> <left> imap <C-k> <up> imap <C-j> <down> But for some odd reason the only one that doesn't work is the last one, . Doing this in insert mode just gives no response. I'm wondering why this might be, and I just don't know where to even begin looking for the problem. It doesn't appear to be mapped to anything since nothing happens when I do it, whether I'm in the terminal or in gvim. Any pointers would be great! Thanks!

  Read the article

• Question marks showing in ls of directory. IO errors too.

  - by jaymoo

  Has anyone seen this before? I've got a raid 5 mounted on my server and for whatever reason it started showing this: jason@box2:/mnt/raid1/cra$ ls -alh ls: cannot access e6eacc985fea729b2d5bc74078632738: Input/output error ls: cannot access 257ad35ee0b12a714530c30dccf9210f: Input/output error total 0 drwxr-xr-x 5 root root 123 2009-08-19 16:33 . drwxr-xr-x 3 root root 16 2009-08-14 17:15 .. ?????????? ? ? ? ? ? 257ad35ee0b12a714530c30dccf9210f drwxr-xr-x 3 root root 57 2009-08-19 16:58 9c89a78e93ae6738e01136db9153361b ?????????? ? ? ? ? ? e6eacc985fea729b2d5bc74078632738 The md5 strings are actual directory names and not part of the error. The question marks are odd, and any directory with a question mark throws an io error when you attempt to use/delete/etc it. I was unable to umount the drive due to "busy". Rebooting the server "fixed" it but it was throwing some raid errors on shutdown. I have configured two raid 5 arrays and both started doing this on random files. Both are using the following config: mkfs.xfs -l size=128m -d agcount=32 mount -t xfs -o noatime,logbufs=8 Nothing too fancy, but part of an optimized config for this box. We're not partitioning the drives and that was suggested as a possible issue. Could this be the culprit?

  Read the article

< Previous Page | 58 59 60 61 62 63 64 65 66 67 68 69  | Next Page >