Search Results

Search found 19093 results on 764 pages for 'max path'.

Page 625/764 | < Previous Page | 621 622 623 624 625 626 627 628 629 630 631 632  | Next Page >

  • openvpn& iptables -- portforwarding and gateway

    - by Smith.Lai
    The problem is similar to this scenario: iptables rule still take effect after deleted Scenario: There are several clients(C1~C10) providing some services, such as SSH,HTTP..... The clients are actually a personal computer behind NAT. Their IP might be 192.168.0.x For easily access these machines through internet, I built a OpenVPN server(S1). All the C1~C10 connect to S1 with VPN address 10.8.0.x If A user(U1) wanna access C1 SSH through internet, he can connect to S1 with port "55555", and S1 port forward 55555 to 10.8.0.6:22 echo 1 /proc/sys/net/ipv4/ip_forward iptables -t nat -A PREROUTING -i eth0 -p tcp --dport 55555 -j DNAT --to-destination 10.8.0.6:22 It works well until I mark the following in the openvpn server.conf: I marked this because I think this will make all connection go through S1 ;push "redirect-gateway" |-------(NAT)--------| (C1)--| (INTERNET)----(U1) |-----(VPN)----(S1)--| The C1~C10 have their own path to access internet resource through NAT . The server loading would be heavy if all C1~C10 connection go through S1 (for example, C1 is sending data to C2, or C1 is downloading data from a FTP site). Is there a way to solve this quandary?

    Read the article

  • samba "username map" stopped to work

    - by Kris_R
    It was time to upgrade our group server (new HDs, problems with old installation of DRBD, etc..). Going as usually for CentOS i upgraded whole system from 6.3 to 6.4 The later one came with samba 3.6 as the old one was 3.5. I transferred most of users by copying /etc/password, /etc/shadow and samba accounts with pdbedit. Homes were on nfs-drive. The translation of unix accounts to samba accounts are located in /etc/samba/smbusers. Strangely enough on some windows clients there was problem to connect to samba-shares. In one case the only thing that worked was, instead of giving windows name, to use the unix account. In another one, it was possible to mount network drive and to open it in Windows Explorer, however other applications like "Total commander" at the attempt of opening this drive gave the message "Cannot connect to z:" (sometimes at this moment user/pass were requested). The smb.conf has following entries: [global] security = user passdb backend = tdbsam username map = /etc/samba/smbusers ... [Kris] comment = Kris's Private path = /SMB/Users/Kris writeable = yes read only = no browseable = yes users = krisr printable = no security mask = 0777 force security mode = 0 directory security mask = 0777 force directory security mode = 0 force create mode = 0775 force directory mode = 6775 The smbusers: # Unix_name = SMB_name1 SMB_name2 ... krisr = Kris Of course testparm runs without any errors. I was used from samba 3.5 to outputs of form Mapped user Kris to krisr. Nothing like this happens now. Just message check_sam_security: Couldn't find user Kris in passdb. I read on web that some guys had problem with 3.6 and security = ADS, but these were not helpful for me. I'm seriously thinking about downgrading back to samba 3.5 but before this step I wanted to ask if somebody knows the solution of these problems. p.s. i've asked this question at serverfault but no answer came. Maybe I have more luck with this forum. Sorry for duplicate if any of you reads both.

    Read the article

  • How do I run a stable Windows XP kvm guest on Ubuntu 10.04?

    - by Jean-Paul Calderone
    I have three Windows XP guests running on a recently upgraded 64-bit Ubuntu 10.04 system. Occasionally (on the order of once every few days), one of the guests will become non-responsive and the kvm process on the host which is running that guest will start consuming 100% CPU. It will continue to do so until it is killed. When restarted, it will be fine for a while, and then the issue repeats. The kvm command line used to run all three guests is this: /usr/bin/kvm -S -M pc-0.12 -enable-kvm -m 1024 -smp 1 -name bigdog21vmxp1 \ -uuid ea47ff84-125b-16f7-9a4d-a6d0d8bab46a \ -chardev socket,id=monitor,path=/var/lib/libvirt/qemu/bigdog21vmxp1.monitor,server,nowait \ -monitor chardev:monitor \ -localtime \ -boot c \ -drive file=/var/lib/libvirt/images/windowsxp-1.qcow2,if=ide,index=0,boot=on,format=qcow2 \ -net nic,macaddr=54:52:00:02:06:0e,vlan=0,name=nic.0 \ -net tap,fd=58,vlan=0,name=tap.0 \ -chardev pty,id=serial0 \ -serial chardev:serial0 \ -parallel none \ -usb \ -usbdevice tablet \ -vnc 127.0.0.1:1 \ -k en-us \ -vga cirrus \ -soundhw es1370 Why do the systems misbehave this way sometimes? And what configuration can I change in order to fix it? Or, if the problem is due to a bug in kvm, what is the process for isolating a kvm failure so that the developers have a chance of fixing it?

    Read the article

  • Nginx + PHP5-FPM repeated cut outs 502

    - by James
    I've seen a number of questions here that highlight random 502 (Nginx + PHP-FPM = "Random" 502 Bad Gateway) and similar time outs when using Nginx + PHP-FPM. Even with all the questions, I'm still unable to find a solution. Using Ubuntu 10.10 + Nginx + PHP5-FPM + APC and every 1 out of 4 requests ends in a timeout and failure. This isn't a load issue or large traffic, it happens even in dev environment with one person. I am doing this across 3 1GB machines, each with the same configurations and same problems. fastcgi_params fastcgi_param QUERY_STRING $query_string; fastcgi_param REQUEST_METHOD $request_method; fastcgi_param CONTENT_TYPE $content_type; fastcgi_param CONTENT_LENGTH $content_length; fastcgi_param SCRIPT_NAME $fastcgi_script_name; fastcgi_param REQUEST_URI $request_uri; fastcgi_param DOCUMENT_URI $document_uri; fastcgi_param DOCUMENT_ROOT $document_root; fastcgi_param SERVER_PROTOCOL $server_protocol; fastcgi_param GATEWAY_INTERFACE CGI/1.1; fastcgi_param SERVER_SOFTWARE nginx/$nginx_version; fastcgi_param REMOTE_ADDR $remote_addr; fastcgi_param REMOTE_PORT $remote_port; fastcgi_param SERVER_ADDR $server_addr; fastcgi_param SERVER_PORT $server_port; fastcgi_param SERVER_NAME $server_name; fastcgi_param REDIRECT_STATUS 200; /etc/php5/fpm/main.conf ; FPM Configuration ; ;include=/etc/php5/fpm/*.conf ; Global Options ; pid = /var/run/php5-fpm.pid error_log = /var/log/php5-fpm.log ;log_level = notice ;emergency_restart_threshold = 0 ;emergency_restart_interval = 0 ;process_control_timeout = 0 ;daemonize = yes ; Pool Definitions ; include=/etc/php5/fpm/pool.d/*.conf /etc/php5/fpm/pool.d/www.conf [www] listen = 127.0.0.1:9000 ;listen.backlog = -1 ;listen.allowed_clients = 127.0.0.1 ;listen.owner = www-data ;listen.group = www-data ;listen.mode = 0666 user = www-data group = www-data ;pm.max_children = 50 pm.max_children = 15 ;pm.start_servers = 20 pm.min_spare_servers = 5 ;pm.max_spare_servers = 35 pm.max_spare_servers = 10 ;pm.max_requests = 500 ;pm.status_path = /status ;ping.path = /ping ;ping.response = pong request_terminate_timeout = 30 ;request_slowlog_timeout = 0 ;slowlog = /var/log/php-fpm.log.slow ;rlimit_files = 1024 ;rlimit_core = 0 ;chroot = chdir = /var/www ;catch_workers_output = yes

    Read the article

  • Database types for customer analytics

    - by Drewdavid
    I am exploring a paid solution to start providing better embedded, dashboard-style analytics information to our website customers/account holders, but would like to also offer an in-house development option to our team. The more equipped I am with specifics (such as the subject of this question), the better the adoption rate from the team (or so I have found), regardless of the path we choose Would anyone care to summarize a couple of options for a fast and scalable database type through which we would provide the following: • Daily pageviews to a users account pages (users have between 1 and 1000 pages) • Some calculated/compounded metrics (such as conversion rate, i.e. certain page type viewed to contact form thank you page ratio) • We have about 1,500 members (will need room to grow); the number of concurrently logged in users will for the question's sake be 50 I ask because our developer has balked at providing this level of "over time" granularity (i.e. daily) due to the number of space it would take up in a MYSQL database To avoid a downvote I have asked specifically for more than one option, realizing that different people will have different solutions. I will make amendments to my question if so guided by answering parties Thank you for sharing your valued answers :)

    Read the article

  • Setup.exe called from a batch file crashes with error 0x0000006

    - by Alex
    We're going to be installing some new software on pretty much all of our computers and I'm trying to setup a GPO to do it. We're running a Windows Server 2008 R2 domain controller and all of our machines are Windows 7. The GPO calls the following script which sits on a network share on our file server. The script it self calls an executable that sits on another network share on another server. The executable will imediatelly crash with an error 0x0000006. The event log just says this: Windows cannot access the file for one of the following reasons: there is a problem with the network connection, the disk that the file is stored on, or the storage drivers installed on this computer; or the disk is missing. Windows closed the program Setup.exe because of this error. Here's the script (which is stored on \\WIN2K8R2-F-01\Remote Applications): @ECHO OFF IF DEFINED ProgramFiles(x86) ( ECHO DEBUG: 64-bit platform SET _path="C:\Program Files (x86)\Canam" ) ELSE ( ECHO DEBUG: 32-bit platform SET _path="C:\Program Files\Canam" ) IF NOT EXIST %_path% ( ECHO DEBUG: Folder does not exist PUSHD \\WIN2K8R2-PSA-01\PSA Data\Client START "" "Setup.exe" "/q" POPD ) ELSE ( ECHO DEBUG: Folder exists ) Running the script manually as administrator also results in the same error. Setting up a shortcut with the same target and parameters works perfectly. Manually calling the executable also works. Not sure if it matters, but the installer is based on dotNETInstaller. I don't know what version though. I'd appreciate any suggestions on fixing this. Thanks in advance! UPDATE I highly doubt this matters, but the network share that the script is hosted in is a shared drive, while the network share the script references for the executable is a shared folder. Also, both shares have Domain Computers listed with full access for the sharing and security tabs. And PUSHD works without wrapping the path in quotes.

    Read the article

  • SVNParentPath directory authorization

    - by James
    The question is a bit stupid but I can't get it sorted. I have a server with SVN that uses the SVNPath directive in httpd.conf and all works fine with path authorizations. Now I'm installing a second serer where I'm going to use SVNParentPath directive and I've got it all running except I can't get the authorization part quite right. From what I understand it's the same as when you use SVNPath but you need to specificy the repo name before the folder name.. My SVNParentPath is /srv/svn/ and I created a directory /srv/svn/testproj and then ran svnadmin create /srv/svn/testproj Now i'm configuring my authorization file: [/] * = svnadmin = rw adusgi = rw [testproj:/svn/testproj] demada = rw degari = rw scarja = rw Now if I try to commit /svn/testproj using user svnadmin or adusgi all is fine. If I try for example demada it doesn't work... (I've run the htpasswd2 commands for the user obviously. The directory is correct or atleast thats how I use the directory with the SVNPath server thats already running, the part I think I'm getting wrong is the repo name, I just used the directory name but what am I really supposed to put there?? Thank you, James

    Read the article

  • Fix overscan in Linux with Intel graphics Vizio HDTV

    - by Padenton
    I am connecting my server to my HDTV so that I can conveniently display it there. My VIZIO HDTV cuts off all 4 edges. I already realize it is not optimal to be running a GUI on a server; this server will not have much external traffic so I prefer it for convenience. I have already spent countless hours searching for a fix, but all I could find required an ATI or NVIDIA graphics card, or didn’t work. In Windows, the Intel driver has a setting for underscan, though it seems only to be available by a glitch. Here’s my specs: Ubuntu Linux (Quantal 12.10) (Likely to switch to Arch) This is a home server computer, with KDE for managing(for now, at least) Graphics: Intel HD Graphics 4000 from Ivy Bridge Motherboard: ASRock Z77 Extreme4 CPU: Intel Core i5-3450 My monitors: Dell LCD monitor Vizio VX37L_HDTV10A 37" on HDMI input I have tried all of the following from both HDMI?HDMI and DVI?HDMI cables connected to the ports on my motherboard: Setting properties in xrandr Making sure drivers are all up to date Trying several different modes The TV was “cheap”; max resolution 1080i. I am able to get a 1920x1080 modeline, in both GNU/Linux and Windows, without difficulty. There is no setting in the menu to fix the overscan (I have tried all of them, I realize it’s not always called overscan). I have been in the service menu for the TV, which still does not contain an option to fix it. No aspect ratio settings, etc. The TV has a VGA connector but I am unsure if it would fix it, as I don’t have a VGA cable long enough, and am not sure it would get me the 1920x1080 resolution which I want. Using another resolution does not fix the problem. I tried custom modelines with the dimensions of my screen’s viewable area, but it wouldn’t let me use them. Ubuntu apparently doesn’t automatically generate an xorg.conf file for use. I read somewhere that modifying it may help solve it. I tried X -configure several times(with reboots, etc.) but it consistently gave the following error messages: In log file: … (WW) Falling back to old probe method for vesa Number of created screens does not match number of detected devices. Configuration failed. In output: … (++) Using config file: "/root/xorg.conf.new" (==) Using system config directory "/usr/share/X11/xorg.conf.d" Number of created screens does not match number of detected devices. Configuration failed. Server terminated with error (2). Closing log file. Tried using 'overscan' prop in xrandr: root@xxx:/home/xxx# xrandr --output HDMI1 --set overscan off X Error of failed request: BadName (named color or font does not exist) Major opcode of failed request: 140 (RANDR) Minor opcode of failed request: 11 (RRQueryOutputProperty) Serial number of failed request: 42 Current serial number in output stream: 42 'overscan on', 'underscan off', 'underscan on' were all also tried. Originally tried with Ubuntu 12.04, but failed and so updated to 12.10 when it was released. All software is up to date. I am not opposed to reinstalling my OS, likely will anyways (my preference being Arch).

    Read the article

  • Sharepoint Workflow "Failed on Start" only when powershell import script is called from task scheduler

    - by Matt Keller
    I created a simple PowerShell script that takes an XML file in a local directory on our sharepoint server and imports it into a specific SharePoint form library. (Content management enabled library if that makes any difference) This script works flawlessly if i run it from the PowerShell command line manually. I call it like such: ".\script_name.ps1". It completes without error and the item is imported into the form library successfully. The workflow begins on the item and everything is happy dandy. However, i run into issues when i setup a scheduled task using Windows Server 2008 R2's task manager. The task runs the script without error and it does actually import the XML into the form library. I looks perfectly normal just as if i had run the script manually. However, after about 10 or 20 minutes the workflow status for that item changes from "In progress" to "Failed on Start (Retrying)". The scheduled task in question is a basic task and has only one action. (Start a program) The "program/script" box is set to "C:\Windows\System32\WindowsPowerShell\v1.0\powershell.exe" and the "Add arguments" box is set to the path of the actual ps1 script. (C:\scripts\sharepoint_import.ps1) I've tried running the task as various users. I've also tried with and without the "Run with highest privileges" check box. Nothing seems to work. For reference, here is the script i am using to import items into the form library.

    Read the article

  • 2nd instance of mysql closes/doesnt start no warnings/errors?

    - by acidzombie24
    I have an external HD and i'd like to run a 2nd mysql instance on it. I used the windows installer to install/configure mysqld as a service on windows7. I took the my.ini from C:\Program Files\MySQL\MySQL Server 5.5\my.ini Then edited the port (client and mysqld), datadir and innodb_data_home_dir. After running this command "C:\Program Files\MySQL\MySQL Server 5.5\bin\mysqld" --defaults-file="f:/dev/my.ini" I found an error which was all about the innodb_data_home_dir directory not existing. After that I ran the command again. Mysqld simply starts up for a second then immediately closes. I see no message in my command prompt. I know this command line args are correct as i see the mysqld service using the same one except a different my.ini path. Also it did tell me about the directory not existing so i know it is reading the new ini file. How do i figure out why this 2nd instance of mysqld is closing? How do i get 2 instance running? I'm using v 5.5

    Read the article

  • Connecting XRAID to Sunfire via LSI FC card - Drives not showing up

    - by Matthew Watson
    Hi, I've got a Sunfire T1000 machine ( Solaris 10 10/09 s10s_u8wos_08a SPARC ) with a LSI7404EP-LC fibre channel card in it. This is plugged into an XRAID. The system seems to have picked up the card > /usr/platform/`uname -i `/sbin/prtdiag IO Location Type Slot Path Name Model ----------- ----- ---- --------------------------------------------- ------------------------- --------- MB/PCIE0 PCIE 0 /pci@780/fibre-channel fibre-channel MB/PCIE0 PCIE 0 /pci@780/fibre-channel fibre-channel MB/NET0 PCIE MB /pci@7c0/pci@0/network@4 network-pci14e4,1668 MB/NET1 PCIE MB /pci@7c0/pci@0/network@4,1 network-pci14e4,1668 MB/NET2 PCIX MB /pci@7c0/pci@0/pci@8/network@1 network-pci108e,1648 MB/NET3 PCIX MB /pci@7c0/pci@0/pci@8/network@1,1 network-pci108e,1648 MB/PCIX PCIX MB /pci@7c0/pci@0/pci@8/scsi@2 scsi-pci1000,50 LSI,1064 However it doesn't seem to be able to see the xraid attached to it, lsiutil only reports the onboard SAS controller. > /usr/local/bin/lsiutil ~ LSI Logic MPT Configuration Utility, Version 1.62, January 14, 2009 1 MPT Port found Port Name Chip Vendor/Type/Rev MPT Rev Firmware Rev IOC 1. mpt0 LSI Logic SAS1064 A3 105 010a0000 0 Select a device: [1-1 or 0 to quit] I've tried adding the configuration to /kernal/drv/sd.conf and /kernal/drv/ssd.conf as per this thread, however format still cannot see any drives on the xraid. I'm not sure where to go next. Any suggestions? From what I've read..this should pretty much just eb plug it in and they show up in format..

    Read the article

  • Where in the stack is Software Restriction Policies implemented?

    - by Knox
    I am a big fan of Software Restriction Policies for Microsoft Windows and was recently updating our settings for this. I became curious as to where Microsoft implemented this technology in the stack. I can imagine a very naive implementation being in Windows Explorer where when you double click on an exe or other blocked file type, that Explorer would check against the policy. I call this naive because obviously this wouldn't protect against someone typing something in a CMD window. Or worse, Adobe Reader running an external application. On the other hand, I can imagine that software restriction policies could be implemented deep in the stack almost at the metal. In this case, the low level loader would load into memory the questionable file, but mark the memory in the memory manager as non-executable data. I'm pretty sure that Microsoft did not do the most naive implementation, because if I block Java using a path block, Internet Explorer will crash if it attempts to load Java. Which is what I want. But I'm not sure how deep in the stack it's implemented and any insight would be appreciated.

    Read the article

  • Setting SVN permissions with Dav SVN Authz

    - by Ken
    There seems to be a path inheritance issue which is boggling me over access restrictions. For instance, if I grant rw access one group/user, and wish to restrict it some /../../secret to none, it promptly spits in my face. Here is an example of what I'm trying to achieve in dav_svn.authz [groups] grp_W = a, b, c, g grp_X = a, d, f, e grp_Y = a, e, [/] * = @grp_Y = rw [somerepo1:/projectPot] @grp_W = rw [somerepo2:/projectKettle] @grp_X = rw What is expected: grp_Y has rw access to all repositories, while grp_W and grp_X only have access to their respective repositories. What occurs: grp_Y has access to all repositories, while grp_W and grp_X have access to nothing If I flip the access ordering where I give everyone access and restrict it in each repository, it promply ignores the invalidation rule (stripping of rights) and gives everyone the access granted at the root level. Forgoing groups, it performs the same with user specific provisions; even fully defined such as: [/] a = rw b = c = d = e = f = g = rw [somerepo1:/projectPot] a = rw b = rw c = rw d = e = rw f = g = rw [somerepo2:/projectKettle] a = rw b c d = rw e = rw f = rw g Which yields the exact same result. According to the documentation I'm following all protocols so this is insane. Running on Apache2 with dav_svn

    Read the article

  • Repository bugzilla package changed to bugzilla3 in Lenny; upgradable?

    - by Pukku
    This question was asked in debianhelp.org almost half a year ago, but never got an answer. I wasn't the one who posted it, however I was today facing exactly the same question. Not sure if copying it to here as such is considered as inappropriate or something, but there's not really anything that I would even like to paraphrase... So let's just go. (I'm sure you will be happy to close it, if this is not the way to go :) Hello all! We are using a Bugzilla server install on a Debian 4/Etch server and are starting to look at the upgrade to Debian 5/Lenny. I was hoping to upgrade the existing Bugzilla server and database from the oldstable (v2.22) to the newer stable in Lenny (v3) when we get to doing a dist-upgrade. However from testing in a virtual machine it seems that the old package was called "Bugzilla" whereas the Lenny package is called "Bugzilla3" and I could not figure a way to directly upgrade between the two. Is it possible to establish some kind of upgrade path quickly after the dist-upgrade to minimise downtime using apt-get or aptitude? Going on past experiences I would not want to do a fresh install with the Bugzilla3 package and attempt to inject the old database into it (previous attempts failed miserably!) :(

    Read the article

  • Failed loading ioncube

    - by time
    I recently upgraded a small server to Ubuntu 12.10 (from 12.04), thus upgrading PHP from 5.3 to 5.4. However, I'm getting this in root's mailbox several times a day: Subject: Cron <root@xxxxxxx> [ -x /usr/lib/php5/maxlifetime ] && [ -d /var/lib/php5 ] && find /var/lib/php5/ -depth -mindepth 1 -maxdepth 1 -type f -ignore_readdir_race -cmin +$(/usr/lib/php5/maxlifetime) ! -execdir fuser -s {} 2>/dev/null \; -delete Content-Type: text/plain; charset=ANSI_X3.4-1968 X-Cron-Env: <SHELL=/bin/sh> X-Cron-Env: <HOME=/root> X-Cron-Env: <PATH=/usr/bin:/bin> X-Cron-Env: <LOGNAME=root> Message-Id: xxxxxxxxxxxxxxxxxxxxxxxx Date: Sun, 9 Dec 2012 05:09:02 -0500 (EST) Failed loading /usr/lib/php5/20090626+lfs/ioncube_loader_lin_5.3.so: /usr/lib/php5/20090626+lfs/ioncube_loader_lin_5.3.so: undefined symbol: php_body_write I assume that's coming up because it's for PHP 5.3. How can I just get rid of ioncube? I have no need for it, I don't even remember installing it. That .so file doesn't exist, and I've grep'd several locations for "ioncube" and I can't seem to figure how to stop that message from flooding the mailbox.

    Read the article

  • How do you setup FTP with IIS Manager Users in an NLB environment with shared IIS configs?

    - by William Jens
    I've setup a 2 node NLB cluster and used the following to share IIS configs between them. http://blogs.technet.com/b/meamcs/archive/2012/05/30/configuring-iis-7-5-shared-configuration.aspx The IIS configs and content is located on a network share via a UNC path. This works - updating IIS settings on one node, is visible in another node and my website works on the individual nodes and the cluster as whole. I'm able to setup an FTP site and successfully connect with my Windows login. However, I want to use IIS Manager Authentication as defined in: http://www.iis.net/learn/publish/using-the-ftp-service/configure-ftp-with-iis-manager-authentication-in-iis-7 I've tried using "Network Service" with the FTP COM object as well as a dedicated user account that exists on all three hosts, but every time I try to login with an IIS user I get something like the following: IISWMSVC_AUTHENTICATION_UNABLE_TO_READ_CONFIG An unexpected error occurred while retrieving the authentication information. Exception:System.Runtime.InteropServices.COMException (0x8007052E): Filename: Error: at Microsoft.Web.Administration.Interop.AppHostWritableAdminManager.GetAdminSection(String bstrSectionName, String bstrSectionPath) at Microsoft.Web.Administration.Configuration.GetSectionInternal(ConfigurationSection section, String sectionPath, String locationPath) at Microsoft.Web.Management.Server.ConfigurationAuthenticationProvider.GetSection(ServerManager serverManager) Process:dllhost User=NT AUTHORITY\NETWORK SERVICE Can anyone point me in the right direction here?

    Read the article

  • VMWare Guest Info - Wrong IP Returned

    - by Jon Bailey
    We're running a VDI environment with vSphere 4.0 and Oracle VDI 3.2.2 and are having a bit of a problem with users that connect to an IPSec VPN from within their VM. For some reason, once connected to the VPN, the VMWare API returns GuestInfo.ipAddress as the VPN IP rather than the primary IP of the only NIC on the system. The IP address shown in net[0].ipAddress is the correct address and is what vSphere client is reporting. Is there any way to get VMWare tools to report the net[0].ipAddress as GuestInfo.ipAddress? Below is sample output from the guestinfo.pl script. 172.16.1.2 is the example "bad" VPN address that our VDI software is seeing. VMXFLEX01 guestFamily: windowsGuest VMXFLEX01 guestFullName: Microsoft Windows XP Professional (32-bit) VMXFLEX01 guestId: winXPProGuest VMXFLEX01 guestState: running VMXFLEX01 hostName: VMXFLEX01 VMXFLEX01 ipAddress: 172.16.1.2 VMXFLEX01 toolsStatus: VMware Tools is running and the version is current. VMXFLEX01 toolsVersion: 8194 VMXFLEX01 Screen - Height: 600 VMXFLEX01 Screen - Width: 800 VMXFLEX01 Disk[0]: Capacity 42935926784 VMXFLEX01 Disk[0]: Path : C:\ VMXFLEX01 Disk[0]: freespace : 33272619008 VMXFLEX01 net[0] - connected : 1 VMXFLEX01 net[0] - deviceConfigId : 4000 VMXFLEX01 net[0] - macAddress : 00:50:56:95:1f:c9 VMXFLEX01 net[0] - network : VM Network VMXFLEX01 net[0] - ipAddress : 10.0.0.2

    Read the article

  • How do I handle a request for "index.php/somepath" in Nginx config?

    - by Arne
    I'm currently attempting to serve Icinga from nginx. The new Icinga-Web ui attempts to load a file from URL http://SERVER/icinga-web/index.php/appkit/squishloader/javascript (leading to a 404). How do I setup a location for this scenario? How do I get nginx to serve index.php and pass the full request path in a way Icinga understands? This is my current nginx config for icinga (adapted from the default apache config): server { server_name SERVER; root /opt/icinga/icinga-1.2.1; location /icinga-web/js/ext3 { alias /opt/icinga/icinga-1.2.1/lib/ext3; } location /icinga-web { alias /opt/icinga/icinga-1.2.1/pub; } location /icinga/cgi-bin { alias /opt/icinga/icinga-1.2.1/sbin; } location /icinga { alias /opt/icinga/icinga-1.2.1/share; } location ~ \.php([\?/].*)?$ { include fastcgi_params; fastcgi_pass 127.0.0.1:61000; fastcgi_index index.php; fastcgi_param SCRIPT_FILENAME $document_root$fastcgi_script_name; } } Any thoughts? Thanks!

    Read the article

  • Skip Corrupt Revisions During SvnAdmin Load

    - by cisellis
    I have a dump file that I am generating from VSS with the use of the VSS2SVN script. I've tested the generated dump file before and some of the revisions are corrupt for one reason or another (binary data or long path strings seem to be the main culprit). This is fine. In the past I have used svndumpfilter to split the dump file, remove the corrupt revisions and continue to load the repository. It worked but took a lot of manual effort to start the load, hit the bad revision, split the dump file, continue loading the repo, etc. This dump file is pretty large (~5GB) and takes several hours to load. I think I know the answer to this but is there any way to simply tell svnadmin load to keep going and skip corrupt revisions? I know how to verify, backup, etc. the dump file and don't need any of that. I don't care about recovering corrupt revisions. I just want to start the load, walk away, and not worry about checking it every few hours to manually remove the corrupt revisions. Is that possible? Thanks.

    Read the article

  • The bottlenecks of any computer, what to look for?

    - by WebDevHobo
    Whether it is a laptop or a desktop, any computer is made up of several pieces of hardware that communicate with each other. Sending data back and forth to ensure that the user gets the desired results. I have seen some theoretical stuff on computers & hardware, but I wonder how it all comes together. CPU RAM Graphics Card L1 CACHE L2 CACHE L3 CACHE FSB ... And all other things. Which is the biggest bottle neck? Why would a person not want/need a big value in one of those categories in certain situations? P.S.: when reading the specs of the i5 750 processor, I came across this description: In place of the FSB, one or more high speed, point-to-point buses called Quick Path Interconnect (QPI) are used, formerly known as Common Serial Interconnect Bus or CSI. QPI features higher bandwidth than the traditional FSB and is better suited to system scaling. What is this, and how does it compare to FSB? EDIT: I am not planning to buy a computer at all. The goal of this question is to understand the internal relation of various hardware pieces, their specific functions and how they work together. For instance, I have heard to a somewhat higher-than-usual amount of L2/L3 Cache can help speed up your computer. What's up with saying that? Also I forgot to mention Hard-disk RPM.

    Read the article

  • Issues with creating a snapshot

    - by Andy Welcomer
    Hello everyone, We have a strange issue when attempting to create a snapshot in one of our regional environments. We have 4 VMs, 2 of them have mulitple VMDKs spread onto different datastores. When a snapshot is created, all the VMDKs (except for the first), seem to vanish. If you look at the properties of the VM, the path to the VMDKS points to the datastore where the primary VMDK is, and the file name is some random garbage. If the snapshot is deleted everything returns to normal. Has anyone ever seen this? I'm using ESX3.5 Thank you in advance. Andy ==============UPDATE============== Here is some more information. I just created a test machine with 7 VMDKs. 1 for the OS. and 6 others for data. All of the VMDKs are in seperate datastores. I take a snapshot of the machine, all of the 6 VMDKs loose their reference to the actual VMDK files. The all point to 64KB VMDK files in the datastore where the OS VMDK is located. These 64KB vmdks didn't exist until the snapshot was taken. When the snapshot is deleted, everything goes back to normal.

    Read the article

  • Buffer Overflow errors when reading ConfigDelay and Manufacturer info from registry

    - by peter
    Hi All, This is a strange driver error which doesn't make a lot of sense to me. I am running an application developed in C# .NET which our company develops. I was monitoring the application using process monitor and noticed that it accesses the registry a lot. The output on Process Monitor looks like this, Operation Result Path RegQueryValue Success HKLM\System\CurrentControlSet\Enum\SWMUXBUS\SW_MODEM\7&6c4af30&0&5&0004\Driver RegQueryValue Success HKLM\System\CurrentControlSet\Control\Class\{4D36E96D-E325-11CE-BFC1-08002BE10318}\0000\Properties RegQueryValue Success HKLM\System\CurrentControlSet\Control\Class\{4D36E96D-E325-11CE-BFC1-08002BE10318}\0000\Default RegQueryValue Success HKLM\System\CurrentControlSet\Control\Class\{4D36E96D-E325-11CE-BFC1-08002BE10318}\0000\InactivityScale RegQueryValue Name Not Found HKLM\System\CurrentControlSet\Control\Class\{4D36E96D-E325-11CE-BFC1-08002BE10318}\0000\PowerDelay RegQueryValue Name Not Found HKLM\System\CurrentControlSet\Control\Class\{4D36E96D-E325-11CE-BFC1-08002BE10318}\0000\ConfigDelay RegQueryValue Buffer Overflow HKLM\System\CurrentControlSet\Control\Class\{4D36E96D-E325-11CE-BFC1-08002BE10318}\0000\Manufacturer RegQueryValue Buffer Overflow HKLM\System\CurrentControlSet\Control\Class\{4D36E96D-E325-11CE-BFC1-08002BE10318}\0000\Model RegQueryValue Name Not Found HKLM\System\CurrentControlSet\Control\Class\{4D36E96D-E325-11CE-BFC1-08002BE10318}\0000\Version The app is reading this stuff every 5 seconds from the registry, so I would ask a few questions, 1) What is this stuff 2) Why is the app reading this stuff 3) Why is it saying 'Buffer Overflow' 4) Could this cause performance problems for my app? From what I can see the app does not explicitly read this stuff, so I think this relates to a driver on the machine (which is a netbook)

    Read the article

  • Windows 7 Folder Redirection (GPO)

    - by Kev
    I have been fighting this issue for a day or two now, so I am looking for some insight. I am taking over admin duties in a domain of 800 users, and the previous admins really did not employ much of any GPO settings for the clients of the Domain. In each site, there is a location on the file server where "Home" folders were manually created. EX: \server\home\enduser Whenever a user got a machine, the admin would manually right-click on the "My Documents" folder and manually enter the path to the home folder. We are planning to start putting Windows 7 machines on the Network, and I am wanting to automate as much as I can, everything that was not done in the past. Since everyone has exising "Home" folders I have been fighting and trying to get Folder Redirection to work with a new Windows 7 machine (In a Test OU). I am getting all kinds of errors and I can't get the Windows 7 "Documents" folder to redirect to the users EXISTING home folders. As I stated earlier, all of the Home folders were (and still are) manually created on the File Server and are set with the following Security permissions - Domain Admins - Full Control euser (end user) - Modify (Everything but Full) Can someone point me in the right direction on the proper setting to put in the Folder Redirection GPO to get this to work with the Existing Home folders.

    Read the article

  • Ruby Passeger + Nginx or lighthttpi + fgci for shared hosting

    - by devnull
    I have set up a passenger + nginx setup and I plan to offer a free non-commercial hosting (or in fact on the fly deployment) for rack-based frameworks (e.g. camping, sinatra). I am facing an "issue" with passenger. For each application you need to configure nginx.conf (it would be the same with apache so it is not an nginx issue) with: server { ... passenger_base_uri /app1; passenger_base_uri /app2; passenger_base_uri /app3; } Now this is not inherently bad as, in theory, I could allow a user to run just one app on his webspace but even in this case I need to create a new server directory on nginx e.g. (user.domain.com). As this will mainly be used to deploy apps the behavior I am looking at is more the possibility to auto map several apps (e.g. app1, app2, app3, app4) under the same server (your app.com/app1 yourapp.com/app2) without having to update the nginx or apache file each time. This seems to be a limitation in passenger. As such I am thinking about an alternative with lighttpd and fastcgi. Would this allow immediate deployment without touching the lighttpd config file e.g. I create a new directory with app2 and it will run immediately ? What is your experience in performance difference between passenger + nginx vs. lighttpd + fastcgi ? thanks in advance scenario details: on nginx + passenger - user cannot add a new sub-folder and run another sinatra/camping app without declaring the path on nginx.conf and restarting the server; wished behavior with the new setup: - user can add a new folder with a new app and it would run on lighttpd+fcgi without any extra configuration of the web server;

    Read the article

  • How are spam e-mails filtered ?

    - by kevindqc
    Hello. I'm just wondering how some e-mails get past the spam filter, and some don't? Everyday I get World of Warcraft phishing emails that get past the filter... For example, here's a phishing email (just the header) I got in my inbox, and not in my junk mail: X-Message-Delivery: Vj0xLjE7dXM9MDtsPTA7YT0wO0Q9MjtTQ0w9Ng== X-Message-Status: n:0 X-SID-PRA: [email protected] X-AUTH-Result: NONE X-Message-Info: M98loaK0Lo27IVRxloyPIZmAwUHKn18nx0o/idLdvGYjK48i19NuvFOnRFYGWE+HdIrNJpi1XaYx0gaAV13cgRnkWSzgHKG1 Received: from blizzard.com ([204.45.59.37]) by SNT0-MC3-F21.Snt0.hotmail.com with Microsoft SMTPSVC(6.0.3790.3959); Sat, 10 Apr 2010 06:38:24 -0700 Received: from hxeabjlh ([192.168.1.165]) (envelope-sender <[email protected]>) by 192.168.1.111 with ESMTP for <[email protected]>; Sat, 10 Apr 2010 08:43:24 -0500 Reply-To: <[email protected]> Sender: [email protected] Message-ID: <DE567AFB9E2F3DD985A2D9A8D12D2917@hxeabjlh> From: "[email protected]" <[email protected]> To: <[email protected]> Subject: World of Warcraft Account Password verification Date: Sat, 10 Apr 2010 21:38:10 +0800 MIME-Version: 1.0 Content-Type: multipart/alternative; boundary="----=_NextPart_000_04EE_0137659E.1AA23350" X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 6.00.2900.5512 X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2900.5512 Return-Path: [email protected] X-OriginalArrivalTime: 10 Apr 2010 13:38:24.0607 (UTC) FILETIME=[17F3A6F0:01CAD8B3] From what I understand, when you send an email with SMTP, you can specify any hostname in the "HELO" command. Here, the spammer specified "blizzard.com". And he sent his email through Hotmail using Outlook Express. I just don't understand how this gets past the spam filter? There's this SPF thing that seems to exist... but it doesn't seem to be used by blizzard? I'm on Windows, and if I use nslookup to look for the TXT records of blizzard.com and worldofwarcraft.com, I don't see a thing.... so blizzard is not using SPF? Why would that be?

    Read the article

< Previous Page | 621 622 623 624 625 626 627 628 629 630 631 632  | Next Page >