Search Results

Search found 19093 results on 764 pages for 'max path'.

Page 627/764 | < Previous Page | 623 624 625 626 627 628 629 630 631 632 633 634  | Next Page >

• Diagnosing a BSOD involving USB

  - by David Ebbo

  [Running Win7 Ultimate 64 bit] My new HP Pavilion Elite HPE-450t has been plagued by BSDO crashes since I got it about 5 weeks ago. The crashes are somewhat rare, sometimes not occurring for 3 or 4 days. I have spent a lot of time trying to isolate the device that could be at fault, but I have seen crashes with only the keyboard and mouse plugged in (as USB devices), and I tried two sets of keyboard/mouse, so I'm running out of ideas. :( The WhoCrashed tool gave this info about my latest BSOD: crash dump file: C:\Windows\Minidump\121310-11887-01.dmp This was probably caused by the following module: usbport.sys (USBPORT+0x2DE4E) Bugcheck code: 0xFE (0x5, 0xFFFFFA8008F571A0, 0x80863B34, 0xFFFFFA80092F2510) Error: BUGCODE_USB_DRIVER file path: C:\Windows\system32\drivers\usbport.sys product: Microsoft® Windows® Operating System company: Microsoft Corporation description: USB 1.1 & 2.0 Port Driver Bug check description: This indicates that an error has occurred in a Universal Serial Bus (USB) driver. The crash took place in a standard Microsoft module. Your system configuration may be incorrect. Possibly this problem is caused by another driver on your system which cannot be identified at this time. I looked at http://msdn.microsoft.com/en-us/library/ff560407(VS.85).aspx, and for Parameter1 = 0x5, it says "A hardware failure has occurred due to a bad physical address found in a hardware data structure. This is not due to a driver bug". Should I conclude that it's a hardware issue in the machine itself, rather than a bad USB driver or USB device? Here is the MiniDump, in case someone can get more info out of it: http://ewt52q.blu.livefilestore.com/y1peS4Ce8nSK1SXghzMDoxDWXlaEu-EKCJsv25y8y5DXXIUzZ9U0_tYgFJXd939fykwa0zRmx98IW0PYG18GioqKAuARYjtspSA/121310-11887-01.dmp?download&psid=2

  Read the article

• Appears to be "randomly" switching between the acl matched backend and the default backend

  - by Xoor

  I have HAProxy acting as a proxy in front of: An NGinx instance An in-house load balancer in front of multiple dynamic services exposed with socket.io (websockets) My problem is that from time to time my connections are proxied correctly to my socket.io cluster, and then randomly it fallsback to routing to NGinx which obviously is annoying and meaningless since NGinx isn't mean't to handle the request. This happens when requesting for URLs of the format : http://mydomain.com/backends/* There's an ACL in the HAProxy config to match the '/backends/*' path. Here's a simplified version of my HAProxy config (removed extra unrelated entries and changed names): global daemon maxconn 4096 user haproxy group haproxy nbproc 4 defaults mode http timeout server 86400000 timeout connect 5000 log global #this frontend interface receives the incoming http requests frontend http-in mode http #process all requests made on port 80 bind *:80 #set a large timeout for websockets timeout client 86400000 # Default Backend default_backend www_backend # Loadfire (socket cluster) acl is_loadfire_backends path_beg /backends use_backend loadfire_backend if is_loadfire_backends # NGinx backend backend www_backend server www_nginx localhost:12346 maxconn 1024 # Loadfire backend backend loadfire_backend option forwardfor # This sets X-Forwarded-For option httpclose server loadfire localhost:7101 maxconn 2048 It's really quite confusing for me why the behaviour appears to be "random", since being hard to reproduce it's hard to debug. I appreciate any insight on this.

  Read the article

• Can't make nodejs mingw32: pkg-config can't find gnutils

  - by valya

  I'm trying to compile nodejs using MSYS, mingw32 on Windows 7-64 Valentin Golev@VALYASNOTEBOOK /home/Valentin_Golev/nodejs $ ./configure Checking for program CL : ok C:\Program Files (x86)\Microsoft V isual Studio 10.0\VC\BIN\x86_amd64\CL.exe Checking for program CL : ok C:\Program Files (x86)\Microsoft V isual Studio 10.0\VC\BIN\CL.exe Checking for program CL : ok C:\Program Files (x86)\Microsoft V isual Studio 10.0\VC\BIN\amd64\CL.exe Checking for program CL : ok c:\Program Files (x86)\Microsoft V isual Studio 9.0\VC\BIN\CL.exe Checking for program CL : ok c:\Program Files (x86)\Microsoft V isual Studio 9.0\VC\BIN\CL.exe Checking for program CL : ok c:\Program Files (x86)\Microsoft V isual Studio 9.0\VC\BIN\x86_amd64\CL.exe Checking for program CL : ok c:\Program Files (x86)\Microsoft V isual Studio 9.0\VC\BIN\CL.exe Checking for program CL : ok c:\Program Files (x86)\Microsoft V isual Studio 9.0\VC\BIN\amd64\CL.exe Checking for program CL : ok c:\Program Files (x86)\Microsoft V isual Studio 9.0\VC\BIN\amd64\CL.exe Checking for program LINK : ok c:\Program Files (x86)\Microsoft V isual Studio 9.0\VC\BIN\amd64\LINK.exe Checking for program LIB : ok c:\Program Files (x86)\Microsoft V isual Studio 9.0\VC\BIN\amd64\LIB.exe Checking for program MT : ok C:\Program Files\\Microsoft SDKs\W indows\v6.0A\bin\x64\MT.exe Checking for program RC : ok C:\Program Files\\Microsoft SDKs\W indows\v6.0A\bin\x64\RC.exe Checking for msvc : ok Checking for msvc : ok Checking for library dl : not found Checking for library execinfo : not found Checking for gnutls >= 2.5.0 : fail --- libeio --- Checking for library pthread : not found Checking for function pthread_create : not found error: the configuration failed (see 'C:\\msys\\1.0\\home\\Valentin_Golev\\node js\\build\\config.log') I have gnutils built and installed! I've checked the config.log, and there was a command: pkg-config --errors-to-stdout --print-errors --atleast-version=2.5.0 gnutls I typed it in the console Valentin Golev@VALYASNOTEBOOK /home/Valentin_Golev/nodejs $ pkg-config --errors-to-stdout --print-errors --atleast-version=2.5.0 gnutls Package gnutls was not found in the pkg-config search path. Perhaps you should add the directory containing `gnutls.pc' to the PKG_CONFIG_PATH environment variable No package 'gnutls' found But, Valentin Golev@VALYASNOTEBOOK ~ $ $PKG_CONFIG_PATH sh: c:/msys/1.0/local/lib/pkgconfig: is a directory Valentin Golev@VALYASNOTEBOOK ~ $ cd $PKG_CONFIG_PATH Valentin Golev@VALYASNOTEBOOK /local/lib/pkgconfig $ ls gnutls-extra.pc gnutls.pc What am I doing wrong?

  Read the article

• Email encoding on IIS7

  - by Ivanhoe123

  All emails sent from the server are displaying Cyrillic letters as weird characters, for example: Можно. Regular alphabet letters are properly rendered. I searched all across the web but was not able to find any solutions. Here is some information about the system: Dedicated server with Windows 2008 and IIS7 Application are in PHP (run as FastCGI) If of any importance, Smartermail is installed on the server The emails are sent using PHPs mail() function through a Drupal website. Encoding on that site is set up properly and there are no display issues on front end. Where is the problem? How can I make Cyrillic letters to be properly encoded? Any help is greatly appreciated. Thanks! UPDATE Here are the email headers: Received: from SERVERNAME (mail.domain.com [12.123.123.123]) by mail.domain.com with SMTP; Fri, 16 Nov 2012 00:00:00 +0100 From: [email protected] To: [email protected] Subject: Email subject Date: Fri, 16 Nov 2012 00:00:00 +0100 MIME-Version: 1.0 Content-Type: text/plain; charset="utf-8" Content-Transfer-Encoding: quoted-printable X-Mailer: Drupal Sender: [email protected] Return-Path: [email protected] Message-ID: f98b801988c642ef911ef46f7cace92b@com X-SmarterMail-Spam: SPF_None, ISpamAssassin 8 [raw: 5], DK_None, DKIM_None, Custom Rules [] X-SmarterMail-TotalSpamWeight: 8

  Read the article

• Restarting shell script with &disown using Monit

  - by Solas Admin

  I have a shell script that runs a C++ backend mail system (PluginHandler). I need to monitor this process in Monit and restart it if it fails. The script: export LD_LIBRARY_PATH=/usr/local/lib/:/CONFIDENTAL/CONFIDENTAL/Common/ cd PluginHandler/ ./PluginHandler This script does not have a PID file and we run this script by executing ./rundaemon.sh &disown ./pluginhandler starts the process and starts logging into /etc/output/output.log I stop the process by identifying the process ID with [ps -f | grep PluginHandler] and then killing the process. I can check the process in Monit just fine, but I think Monit is starting the process if it is not running but it can't do &disown so the process ends as soon as it starts. This is the code in the monitrc file for checking this process: check process Backend matching "PluginHandler" if not exist then alert start "PATH/TO/SCRIPT/rundaemon.sh &disown" alert [email protected] only on {timeout} with mail-format {subject: "[BLAH"} I tried to stop the script from terminating by modifying the script like the following but this does not work either. export LD_LIBRARY_PATH=/usr/local/lib/:/home/CONFIDENTAL/production/CONFIDENTAL/Common/ cd PluginHandler/ (nohup ./PluginHandler &) return Any help to write a proper Monit rules to resolve this issue would be greatly appreciated :)

  Read the article

• Script launching 3 copies of rsync

  - by organicveggie

  I have a simple script that uses rsync to copy a Postgres database to a backup location for use with Point In Time Recovery. The script is run every 2 hours via a cron job for the postgres user. For some strange reason, I can see three copies of rsync running in the process list. Any ideas why this might the case? Here's the cron entry: # crontab -u postgres -l PATH=/bin:/usr/bin:/usr/local/bin 0 */2 * * * /var/lib/pgsql/9.0/pitr_backup.sh And here's the ps list, which shows two copies of rsync running and one sleeping: # ps ax |grep rsync 9102 ? R 2:06 rsync -avW /var/lib/pgsql/9.0/data/ /var/lib/pgsql/9.0/backups/pitr_archives/20110629100001/ --exclude pg_xlog --exclude recovery.conf --exclude recovery.done --exclude pg_log 9103 ? S 0:00 rsync -avW /var/lib/pgsql/9.0/data/ /var/lib/pgsql/9.0/backups/pitr_archives/20110629100001/ --exclude pg_xlog --exclude recovery.conf --exclude recovery.done --exclude pg_log 9104 ? R 2:51 rsync -avW /var/lib/pgsql/9.0/data/ /var/lib/pgsql/9.0/backups/pitr_archives/20110629100001/ --exclude pg_xlog --exclude recovery.conf --exclude recovery.done --exclude pg_log And here's the uber simple script that seems to be the cause of the problem: #!/bin/sh LOG="/var/log/pgsql-pitr-backup.log" base_backup_dir="/var/lib/pgsql/9.0/backups" wal_archive_dir="$base_backup_dir/wal_archives" pitr_archive_dir="$base_backup_dir/pitr_archives" timestamp=`date +%Y%m%d%H%M%S` backup_dir="$pitr_archive_dir/$timestamp" mkdir -p $backup_dir echo `date` >> $LOG /usr/bin/psql -U postgres -c "SELECT pg_start_backup('$backup_dir');" rsync -avW /var/lib/pgsql/9.0/data/ $backup_dir/ --exclude pg_xlog --exclude recovery.conf --exclude recovery.done --exclude pg_log /usr/bin/psql -U postgres -c "SELECT pg_stop_backup();"

  Read the article

• Setup Version Control on Dreamweaver

  - by John Isaacks

  I have a win computer on the Network called WIN2K8FS1 I have TortoiseSVN on a win computer and when I go to checkout a repository with Tortoise it asks me for the URL of the repository. I put in: file://WIN2K8FS1/Media/SVN_repo And it creates the working copy. I am trying to setup Dreamweaver CS5 to work with subversion. I create a new site and I go to the Version Control tab and it asks for a lot if info. First is Access. I choose Subversion since that is the only option Second is Protocol. Not sure which I need so I go with HTTP? Third is Server Address. I am assuming this is the name of the computer with the repository so I put in \\WIN2K8FS1\ Fourth is Repository Path. I put in /Media/SVN_repo Fifth is Port which I leave default to 80 Then it asks for user name and password. I never set one up for anything so I put in my domain username and password. I click test and it tells me: Server and project are not accessible! I am not sure what I am doing wrong. I am not the server admin but I did create the repository and have access to it via Tortoise. So I am not sure what I am doing wrong in Dreamweaver.

  Read the article

• ssh connection operation timed out using rsync

  - by Mark Molina

  I use rsync to backup my remote server on my local device but when I combine it with a cron job my ssh times out. Just to be clear, the data is stored on a remote server and I want it stored on my local server. The backup request must be sent from my local server to the remote server. The command for backup up the data is working when I just type it in terminal like this: rsync -chavzP --stats USERNAME@IPADDRES: PATH_TO_BACKUP LOCAL_PATH_TO_BACKUP but when I combine it with a cron job like this: 10 11 * * * rsync -chavzP --stats USERNAME@IP_ADDRESS: PATH_TO_BACKUP LOCAL_PATH_TO_BACKUP the ssh connection times out. When the cronjob executes it send a mail to the root user with the output like this: From local.xx.xx.xx Tue Jul 2 11:20:17 2013 X-Original-To: username Delivered-To: [email protected] From: [email protected] (Cron Daemon) To: [email protected] Subject: Cron <username@server> rsync -chavzP --stats USERNAME@IPADDRES: PATH_TO_BACKUP LOCAL_PATH_TO_BACKUP X-Cron-Env: <SHELL=/bin/sh> X-Cron-Env: <PATH=/usr/bin:/bin> X-Cron-Env: <LOGNAME=username> X-Cron-Env: <USER=username> X-Cron-Env: <HOME=/Users/username> Date: Tue, 2 Jul 2013 11:20:17 +0200 (CEST) ssh: connect to host IP_ADDRESS port XX: Operation timed out rsync: connection unexpectedly closed (0 bytes received so far) [receiver] rsync error: unexplained error (code 255) at /SourceCache/rsync/rsync-42/rsync/io.c(452) [receiver=2.6.9] So the rsync command is working when just typed in terminal but not when used by a cronjob. Can anybody explain this?

  Read the article

• Why apache throws 403 on index file after install?

  - by den-javamaniac

  Hi. I've just installed apache and php from sources using next commands: ./configure --prefix="/mnt/workspace/servers/web/apache-2.2.17" \ --enable-info --enable-rewrite --enable-usertrack --enable-mime-magic for apache and ./configure --with-apxs2=/mnt/workspace/servers/web/apache-2.2.17/bin/apxs \ --prefix=/mnt/workspace/servers/web/apache-2.2.17/php \ --with-config-file-path=/mnt/workspace/servers/web/apache-2.2.17/php \ --with-mysql=mysqlnd for php. After adjusting configuration (httpd.conf) and starting apache it gives a 403 response on http://localhost:8060/index.html (presuming that 8060 is used) request. There are next directory settings in httpd.conf: <Directory "/mnt/workspace/servers/web/apache-2.2.17/htdocs"> ... Order allow,deny Allow from all ... </Directory> <IfModule dir_module> DirectoryIndex index.html index.php </IfModule> It should be noted that I've got apache on a mounted (default auto mount configured while installing ubuntu) partition. Log Files Access log: ::1 - - [12/Feb/2011:17:48:30 +0200] "GET / HTTP/1.1" 403 202 ::1 - - [12/Feb/2011:17:48:31 +0200] "GET /favicon.ico HTTP/1.1" 403 213 ::1 - - [12/Feb/2011:17:48:48 +0200] "GET /index.html HTTP/1.1" 403 212 ::1 - - [12/Feb/2011:17:48:48 +0200] "GET /favicon.ico HTTP/1.1" 403 213 ::1 - - [12/Feb/2011:17:49:03 +0200] "GET /index.html HTTP/1.1" 403 212 ::1 - - [12/Feb/2011:17:49:03 +0200] "GET /favicon.ico HTTP/1.1" 403 213 Error log: [Sat Feb 12 18:59:13 2011] [notice] Apache/2.2.17 (Unix) PHP/5.3.5 configured -- resuming normal operations [Sat Feb 12 18:59:22 2011] [error] [client ::1] (13)Permission denied: access to / denied [Sat Feb 12 18:59:22 2011] [error] [client ::1] (13)Permission denied: access to /favicon.ico denied [Sat Feb 12 18:59:36 2011] [error] [client ::1] (13)Permission denied: access to /index.html denied

  Read the article

• BTrFS crashhhh?

  - by bumbling fool

  I create a new BTrFS raid10 file system using two 250GB drives and the second partition on a third 80GB drive. I create a subvol and snapshot. I mount the snapshot and start copying 8GB of data to it. It gets to around 1GB and the Desktop disappears and what looks like a non interactive terminal comes up with dump/crash information. I don't have a camera handy or I'd take a picture and post it. It basically looks like stack trace info. CTRL-ALT F7 will eventually bring back the Desktop though but the entire BTrFS portion of the OS is hung and non responsive until I reboot. I've reformated and reproduced this problem 3 times now and I'm about to give up :( I realize it is possible this problem is not entirely BTrFS' fault because I'm on natty which is still alpha. More granular details in case I'm an idiot: 1) Create FS: sudo mkfs.btrfs -m raid10 -d raid10 /dev/sda2 /dev/sdb /dev/sdc 2) Initial temporary mount: mkdir /btrfs && sudo mount -t btrfs /dev/sda2 /btrfs 3) Create subvol btrfs s c /btrfs/vm 4) Create initial snapshot: (optional) btrfs s sn /btrfs/cantremember.snap.something 5)unmount /btrfs and mount /btrfs/vm sudo mount -t btrfs -o subvol=vm /dev/sda2 /btrfs/vm 6) Copy data to subvolume. 7) Balance data across drives: (optional) btrfs f bal <path> (never get to this step 7...) Am I doing something wrong?

  Read the article

• Need help with custom init script

  - by churnd

  I'm trying to set up an init script for a process on redhat linux: #!/bin/sh # # Startup script for Conquest # # chkconfig: 345 85 15 - start or stop process definition within the boot process # description: Conquest DICOM Server # processname: conquest # pidfile: /var/run/conquest.pid # Source function library. This creates the operating environment for the process to be started . /etc/rc.d/init.d/functions CONQ_DIR=/usr/local/conquest case "$1" in start) echo -n "Starting Conquest DICOM server: " cd $CONQ_DIR && daemon --user mruser ./dgate -v - Starts only one process of a given name. echo touch /var/lock/subsys/conquest ;; stop) echo -n "Shutting down Conquest DICOM server: " killproc conquest echo rm -f /var/lock/subsys/conquest rm -f /var/run/conquest.pid - Only if process generates this file ;; status) status conquest ;; restart) $0 stop $0 start ;; reload) echo -n "Reloading process-name: " killproc conquest -HUP echo ;; *) echo "Usage: $0 {start|stop|restart|reload|status}" exit 1 esac exit 0 However, the cd $CONQ_DIR is getting ignored, because the script errors out: # ./conquest start Starting Conquest DICOM server: -bash: ./dgate: No such file or directory [FAILED] For some reason, I have to run dgate as ./dgate. I cannot specify the full path /usr/local/conquest/dgate The software came with an init script for a Debian system, so the script uses start-stop-daemon, with the option --chdir to where dgate is, but I haven't found a way to do this with the Redhat daemon function.

  Read the article

• How do I hook into Tar with BASH?

  - by orb

  Long Story Short I am working with Tar archives that contain PNG images in base64 encoding. I would like to use BASH (or whatever else works) to hook into the extraction function of Tar to decode PNG images from base64 encoding to standard PNG encoding after the files are unpacked. A simple cat $input-file | base64 -d >$output-file will successfully decode the images. Is there a way I can hook into tar -xf so that users do not have to do any (or minimal) extra work to decode the images? In the GNU Tar documentation (http://www.gnu.org/software/tar/manual/html_chapter/Backups.html#SEC97) I found that there are in fact variables reserved to hold the names of functions I desire to be hooked into various moments in Tar program execution. However, the documentation explains that these variables, along with other variables that can be set to configure Tar, are located in a file named backup-specs. Unfortunately, the path to this file is not given. Further, running sudo find / -name backup-specs tells me that this file is not present on my Ubuntu version 13.04 system. Background Information not included in the Long Story Short I have been working on a browser-based (WebGL) particle effect creation application (http://www.particleeffect.org), (https://github.com/cgrabowski/webgl-particle-effect-editor), (https://github.com/cgrabowski/webgl-particle-effect). I have began to write a client-side-only solution for saving and loading effect data as a tar archive. However, since client-side JavaScript has limited capability to process binary data, the images used as textures in the effect are saved with base64 encoding. I have been able to implement saving effect data as a Tar archive (haven't pushed that to Github yet). However, the images present in said Tar archive cannot be manipulated unless they are decoded from base64 encoding.

  Read the article

• SQL Query to update parent record with child record values

  - by Wells

  I need to create a Trigger that fires when a child record (Codes) is added, updated or deleted. The Trigger stuffs a string of comma separated Code values from all child records (Codes) into a single field in the parent record (Projects) of the added, updated or deleted child record. I am stuck on writing a correct query to retrieve the Code values from just those child records that are the children of a single parent record. -- Create the test tables CREATE TABLE projects ( ProjectId varchar(16) PRIMARY KEY, ProjectName varchar(100), Codestring nvarchar(100) ) GO CREATE TABLE prcodes ( CodeId varchar(16) PRIMARY KEY, Code varchar (4), ProjectId varchar(16) ) GO -- Add sample data to tables: Two projects records, one with 3 child records, the other with 2. INSERT INTO projects (ProjectId, ProjectName) SELECT '101','Smith' UNION ALL SELECT '102','Jones' GO INSERT INTO prcodes (CodeId, Code, ProjectId) SELECT 'A1','Blue', '101' UNION ALL SELECT 'A2','Pink', '101' UNION ALL SELECT 'A3','Gray', '101' UNION ALL SELECT 'A4','Blue', '102' UNION ALL SELECT 'A5','Gray', '102' GO I am stuck on how to create a correct Update query. Can you help fix this query? -- Partially working, but stuffs all values, not just values from chile (prcodes) records of parent (projects) UPDATE proj SET proj.Codestring = (SELECT STUFF((SELECT ',' + prc.Code FROM projects proj INNER JOIN prcodes prc ON proj.ProjectId = prc.ProjectId ORDER BY 1 ASC FOR XML PATH('')),1, 1, '')) The result I get for the Codestring field in Projects is: ProjectId ProjectName Codestring 101 Smith Blue,Blue,Gray,Gray,Pink ... But the result I need for the Codestring field in Projects is: ProjectId ProjectName Codestring 101 Smith Blue,Pink,Gray ... Here is my start on the Trigger. The Update query, above, will be added to this Trigger. Can you help me complete the Trigger creation query? CREATE TRIGGER Update_Codestring ON prcodes AFTER INSERT, UPDATE, DELETE AS WITH CTE AS ( select ProjectId from inserted union select ProjectId from deleted )

  Read the article

• How to access Windows Server 2008 R2 file shares from a different subnet

  - by Lloyd Cotten

  We have a couple of severs that used to be Windows Server 2003 that we recently upgraded to Windows Server 2008 R2. A couple of details to set the situation up: We wiped the OS and re-installed. These servers are on one subnet (172.16.x.x) and we are trying to access some file shares on them from another subnet (10.34.x.x). Firewall is disabled on these servers. Trying to access with UNC "\172.16.x.x\sharename" and net use \172.16.x.x However, we're having problems doing this. We are getting "The network path was not found". Here's some of the things we've tried so far and the result: Tried accessing the share from other (non-2008) servers on the same subnet... Success! Ping servers from different subnet... Success! Telnet connection into port 139 from different subnet... Success! Took a scan through Local Security Policies to see if something obvious needed to be enabled / disabled / configured... Fail I'm not sure where to look next. I know that the router between the two subnets is locked down pretty good, but this did work for our 2003 servers. Has anything changed in the way of ports used for UNC / file share access in 2008? Maybe I'm missing some security policy setting? Hoping somebody can take pity on a poor programming guy that can't figure out something really simple. :-) Thanks!

  Read the article

• Long connection times from PHP to MySQL on EC2

  - by Erik Giberti

  I'm having an intermittent issue connecting to a database slave with InnoDB. Intermittently I get connections taking longer than 2 seconds. These servers are hosted on Amazon's EC2. The app server is PHP 5.2/Apache running on Ubuntu. The DB slave is running Percona's XtraDB 5.1 on Ubuntu 9.10. It's using an EBS Raid array for the data storage. We already use skip name resolve and bind to address 0.0.0.0. This is a stub of the PHP code that's failing $tmp = mysqli_init(); $start_time = microtime(true); $tmp-options(MYSQLI_OPT_CONNECT_TIMEOUT, 2); $tmp-real_connect($DB_SERVERS[$server]['server'], $DB_SERVERS[$server]['username'], $DB_SERVERS[$server]['password'], $DB_SERVERS[$server]['schema'], $DB_SERVERS[$server]['port']); if(mysqli_connect_errno()){ $timer = microtime(true) - $start_time; mail($errors_to,'DB connection error',$timer); } There's more than 300Mb available on the DB server for new connections and the server is nowhere near the max allowed (60 of 1,200). Loading on both servers is < 2 on 4 core m1.xlarge instances. Some highlights from the mysql config max_connections = 1200 thread_stack = 512K thread_cache_size = 1024 thread_concurrency = 16 innodb-file-per-table innodb_additional_mem_pool_size = 16M innodb_buffer_pool_size = 13G Any help on tracing the source of the slowdown is appreciated. [EDIT] I have been updating the sysctl values for the network but they don't seem to be fixing the problem. I made the following adjustments on both the database and application servers. net.ipv4.tcp_window_scaling = 1 net.ipv4.tcp_sack = 0 net.ipv4.tcp_timestamps = 0 net.ipv4.tcp_fin_timeout = 20 net.ipv4.tcp_keepalive_time = 180 net.ipv4.tcp_max_syn_backlog = 1280 net.ipv4.tcp_synack_retries = 1 net.core.rmem_max = 16777216 net.core.wmem_max = 16777216 net.ipv4.tcp_rmem = 4096 87380 16777216 net.ipv4.tcp_wmem = 4096 87380 16777216 [EDIT] Per jaimieb's suggestion, I added some tracing and captured the following data using time. This server handles about 51 queries/second at this the time of day. The connection error was raised once (at 13:06:36) during the 3 minute window outlined below. Since there was 1 failure and roughly 9,200 successful connections, I think this isn't going to produce anything meaningful in terms of reporting. Script: date /root/database_server.txt (time mysql -h database_Server -D schema_name -u appuser -p apppassword -e '') /dev/null 2 /root/database_server.txt Results: === Application Server 1 === Mon Feb 22 13:05:01 EST 2010 real 0m0.008s user 0m0.001s sys 0m0.000s Mon Feb 22 13:06:01 EST 2010 real 0m0.007s user 0m0.002s sys 0m0.000s Mon Feb 22 13:07:01 EST 2010 real 0m0.008s user 0m0.000s sys 0m0.001s === Application Server 2 === Mon Feb 22 13:05:01 EST 2010 real 0m0.009s user 0m0.000s sys 0m0.002s Mon Feb 22 13:06:01 EST 2010 real 0m0.009s user 0m0.001s sys 0m0.003s Mon Feb 22 13:07:01 EST 2010 real 0m0.008s user 0m0.000s sys 0m0.001s === Database Server === Mon Feb 22 13:05:01 EST 2010 real 0m0.016s user 0m0.000s sys 0m0.010s Mon Feb 22 13:06:01 EST 2010 real 0m0.006s user 0m0.010s sys 0m0.000s Mon Feb 22 13:07:01 EST 2010 real 0m0.016s user 0m0.000s sys 0m0.010s [EDIT] Per a suggestion received on a LinkedIn question, I tried setting the back_log value higher. We had been running the default value (50) and increased it to 150. We also raised the kernel value /proc/sys/net/core/somaxconn (maximum socket connections) to 256 on both the application and database server from the default 128. We did see some elevation in processor utilization as a result but still received connection timeouts.

  Read the article

• Wget save cookies not working

  - by TrymBeast

  I've been trying to login in the pyload through the web api, but wget is not saving the cookies and I don't understand why. I'm using the following command: wget --delete-after --keep-session-cookies --save-cookies=my_cookies.txt --post-data="username=USERNAME&password=PASSWORD" http://localhost:8000/api/login But the content of my_cookies.txt is: # HTTP cookie file. # Generated by Wget on 2012-06-23 22:31:33. # Edit at your own risk. When I run the same command but in debug mode I get the following output that includes the set cookie in the header response: DEBUG output created by Wget 1.10.2 (Red Hat modified) on linux-gnueabi. --22:31:11-- http://localhost:8000/api/login Resolving localhost... 127.0.0.1 Caching localhost => 127.0.0.1 Connecting to localhost|127.0.0.1|:8000... connected. Created socket 3. Releasing 0x000504d0 (new refcount 1). ---request begin--- POST /api/login HTTP/1.0 User-Agent: Wget/1.10.2 (Red Hat modified) Accept: */* Host: localhost:8000 Connection: Keep-Alive Content-Type: application/x-www-form-urlencoded Content-Length: 32 ---request end--- [POST data: username=USERNAME&password=PASSWORD] HTTP request sent, awaiting response... ---response begin--- HTTP/1.1 200 OK Content-Length: 34 Content-Type: application/json Cache-Control: no-cache, must-revalidate Set-cookie: beaker.session.id=405390ddc809efed54820638c95d7997; expires=Tue, 19-Jan-2038 04:14:07 GMT; Path=/ Connection: Keep-Alive Date: Sat, 23 Jun 2012 21:31:11 GMT Server: CherryPy/3.1.2 WSGI Server ---response end--- 200 OK hs->local_file is: login (not existing) Registered socket 3 for persistent reuse. TEXTHTML is on. Length: 34 [application/json] Saving to: `login' 100%[=======================================>] 34 --.-K/s in 0s 22:31:11 (1.28 MB/s) - `login' saved [34/34] Removing file due to --delete-after in main(): Removing login. Saving cookies to my_cookies.txt. Done saving cookies. Can anyone tell me what am I doing wrong? Thanks in advance!

  Read the article

• Cannot access server shares over VPN

  - by DuncanDavies

  I've set up a single hosted server to use as a development environment for a web-based application. The web app is served up fine on port 80, however I'm struggling to get my VPN to behave how I'd expect so the developers don't have the access they require. The VPN connects fine and I can access the back-end database (SQL Server) which resides on the server with the client tools from the laptops. However they cannot access any shared folders. The server's local IP address is 10.x.x.x, and I've assigned a static IP address pool to RRAS (of 192.168.100.1 - 20). The clients pick up a valid IP Address (i.e. 192.168.100.9) when they connect. There is no name resolution setup, DNS or WINS. When connected via VPN the clients can ping the server (192.168.100.1) by IP Address, but cannot map a drive to a shared folder (net use * \\192.168.100.1\xxxxx) - I get 'System error 53 has occurred. The network path was not found.' I don't understand why I can ping by the ip, but not map by it. Some details: Server OS is Windows 2008 (Datacenter) VPN is SSTP using RRAS Clients are all Windows 7 I've tried temporarily disabling the firewalls So, why can we not access the file system when everything else (ping, RDP, SQL Server clients tools) works? Thanks for your help Duncan

  Read the article

• DriveImage XML fails with a Windows Volume Shadow Service Error

  - by ssvarc

  I'm trying to image a SATA laptop hard drive, using DriveImageXML, that is attached to my computer via a USB adapter. I'm running Win7 Ultimate 64 bit. DriveXML is returning: Could not initialize Windows Volume Shadow Service (VSS). ERROR C:\Program Files (x86)\Runtime Software\Drivelmage XML\vss64.exe failed to start. ERROR TIMEOUT Make sure VSSVC.EXE is running in your task manager. Click Help for more information. VSSVC.EXE is running in Task Manager, as is VSS64.exe. Looking at the FAQ on the Runtime webpage this turned up: Please verify in Settings-Control Panel-Administrative Tools-Services that the following services are enabled: MS Software Shadow Copy Provider Volume Shadow Copy Also make sure you are able to stop and start these services. Possible reasons for VSS failures: For VSS to work, at least one volume in your computer must be NTFS. If you use only FAT drives, VSS will not function. The required NTFS volume does not need to be identical with the volume you want to image. You should make sure that VSSVC.EXE is running in your task manager. If the problems persist, registering "oleaut.dll" and "oleaut32.dll" using "regsvr32" might help. Both of those services are running and can be started and stopped without issue. Using "regsvr32" to register ""oleaut32.dll" returns successful, but "oleaut.dll" returns: The module "oleaut.dll" failed to load. Make sure the binary is stored at the specified path or debug it to check for problems with the binary or dependent .DLL files. The specified module could not be found. Some other information that might be relevant. Browsing to the drive is successful, but accessing certain folders returns an "access" error. Windows runs a permissions adder that adds the current user profile to the NFTS permissions. Could this be the cause of the issue? DriveImage XML is running as Administrator. Thoughts?

  Read the article

• Why do my backup fail when I target a network share hosted by a Synology DS211 disk station?

  - by Larry

  My backups are failing when I try to use a network share hosted by a Synology DS211 disk station. They work fine if I target a different network share (i.e. \server1\data\larry). When I run the following command: Wbadmin start backup -backupTarget:\\diskstation\backup-larry -include:C: This is what I get: wbadmin 1.0 - Backup command-line tool (C) Copyright 2004 Microsoft Corp. Note: The backed up data cannot be securely protected at this destination. Backups stored on a remote shared folder might be accessible by other people on the network. You should only save your backups to a location where you trust the other users who have access to the location or on a network that has additional security precautions in place. Retrieving volume information... This will back up volume WIN7(C:) to \\diskstation\backup-larry. Do you want to start the backup operation? [Y] Yes [N] No y Note: The list of volumes included for backup does not include all the volumes that contain operating system components. This backup cannot be used to perform a system recovery. However, you can recover other items if the destination media type supports it. The backup operation to \\diskstation\backup-larry is starting. Creating a shadow copy of the volumes specified for backup... Creating a shadow copy of the volumes specified for backup... The backup operation stopped before completing. Summary of the backup operation: ------------------ The backup operation stopped before completing. Detailed error: Access is denied. Windows Backup failed to write the file: '<backup location>\WindowsImageBackup\<Computer Name>\MediaId'. Access is denied. The backup creates the following path \\diskstation\backup-larry\WindowsImageBackup\LARRY-MYDOMAIN\ but its empty. I definitely have read/write access on the target directory (\diskstation\backup-larry). I have verified this by looking at the permission and by actually copying files to this location. Any suggestions?

  Read the article

• SQL Full-Text indexing not populating

  - by Sam

  We installed a clustered SQL 2005 installation on windows 2008 and reattached our san drives from another machine and restored to do a migration to new hardware. There have been a few minor issues, but this one has me stuck. Trying to populate Full-Text indexes is not working. I create a basic table with some simple text in a new database and get the same results as old indexes. 2010-09-27 10:30:46.85 spid19s Informational: Full-text Full population initialized for table or indexed view '[SQL_DBA].[dbo].[CIS_Report_Executions]' (table or indexed view ID '1767677345', database ID '5'). Population sub-tasks: 1. 2010-09-27 10:31:15.36 spid19s Error '0x80070003' occurred during full-text index population for table or indexed view '[SQL_DBA].[dbo].[CIS_Report_Executions]' (table or indexed view ID '1767677345', database ID '5'), full-text key value 0x000001DF. Attempt will be made to reindex it. 2010-09-27 10:31:15.37 spid19s The component 'MSFTE.DLL' reported error while indexing. Component path 'D:\Program Files\Microsoft SQL Server\MSSQL.1\MSSQL\Binn\MSFTE.DLL'. 2010-09-27 10:31:15.37 spid19s Error '0x80070003' occurred during full-text index population for table or indexed view '[SQL_DBA].[dbo].[CIS_Report_Executions]' (table or indexed view ID '1767677345', database ID '5'), full-text key value 0x000001E0. Attempt will be made to reindex it. The rebuild/repopulate procedure finishes, but I get zero rows in the index. The .dll in the message is present and the service accounts have access to this. My FTData also has data in it, so it seems there wouldn't be permission issue on this folder. Application throws this error: “PHP Warning: mssql_query() [function.mssql-query]: message: Full-text catalog 'ikm_PageIndex_FText' is in an unusable state. Drop and re-create this full-text catalog. (severity 16) in E:\Inetpub\knowledgebase_insidemesa\lib\database\mssql.php on line 154” A microsoft discussion is the only post I found which had claimed to fix this - said it was registry related, but then didn't post the fix.

  Read the article

• mysql command line not working

  - by Sandeepan Nath

  I have mysql running in my fedora system. I have xampp setup on the system and php projects present in the webspace are working fine. PhpMyAdmin is working fine. echoing phpinfo() in a PHP script also shows mysql enabled. But running mysql connect command mysql -u[username] -p[password] Gives this - bash: mysql: command not found How do I fix that? Any pointers? I guess I need to do some pointing (define some path in some file) so that my system knows that mysql is installed. What exactly do I have to do? Additional Details This system was someone else's and he is not available here. May be PHP/Mysql was setup already in the system. I just freshly extracted xampp for linux into /opt/lampp/ and have put all the above mentioned things (PHP projects and PhpMyAdmin) there. After doing that I had a socket problem (PhpMyAdmin was not working and showing this)- #2002 - The server is not responding (or the local MySQL server's socket is not correctly configured) I restarted lampp using ./lampp restart but problem remained. Then after turning on system today, I started lampp and everything worked just fine. No project issues anymore only command line Mysql not working

  Read the article

• Installing WindowsAuthentication breaks authentication / web.config?

  - by Ian Quigley

  I have a clean Windows 2008 R2 box (on a VM) and have installed IIS 7.5 with default options. I then copied a website to it (from Windows 7, IIS 7) and after a little tweaking the website is working fine. The website is currently using and working with Anonymous Authentication. I have gone back to the Windows Components/Sever Manager, Roles - Security and ticked and installed Windows Authentication. When I check my server in IIS (top level above sites) - Authentication, I see Anonymous Authentication (enabled) ASP.NET Impersonation (disabled) Forms Authentication (disbaled) Windows Authentication (enabled) When I check my default website - Authentication, I see as above but "Retrieving status" and an error dialog saying There was an error while performing this operation. Details: Filename c:\inetpub\wwwroot\screwturnwiki\web.config Line number: 96 Error: This configuration section cannot be used in this path. This happens when the section is being locked at the parent level. Locking is either by default (overriderModeDefault="Deny"), or set explicity by a location tag with overrideMode="Deny" or the legacy allowOverride="False". I have tried hand editing the web.config with no success. UN-installing Windows Authentication happily returns my site to working with Anonymous Authentication, and allows me to enable/disable these three options. FYI. I am using ScrewTurnWiki with the Active Directory plug in.

  Read the article

• Xen domain migration locking problem

  - by brodie

  I am trying to live migrate a VM (domain) between two Xen servers. I have xen locking (xend-domain-lock = yes) configured with a ocfs2 shared storage between them. This locking is working fine. If I try to start up the VM on the secondary server it refuses to start (which is correct). The problem I am having is when trying to do live migration, it seems like it is trying to remove the lock twice. The first lock it removes is for "domain test", the second is for "migrating-test" which does not exist. Should their be a lock for this "migrating-test" VM? These are the relevant options in the xen config file: (xend-relocation-server yes) (xend-relocation-port 8002) (xend-relocation-address '') (xend-relocation-hosts-allow '') (xend-domain-lock yes) (xend-domain-lock-path /var/lib/xen/lock) This is the section of the log: [2010-06-10 10:45:57 14488] DEBUG (XendDomainInfo:4054) Releasing lock for domain test [2010-06-10 10:45:57 14488] INFO (XendCheckpoint:474) SUSPEND shinfo 000c6ceb [2010-06-10 10:45:57 14488] INFO (XendCheckpoint:474) delta 21ms, dom0 95%, target 0%, sent 57Mb/s, dirtied 173Mb/s 111 pages 4: sent 111, skipped 0, delta 6ms, dom0 100%, target 0%, sent 606Mb/s, dirtied 606Mb/s 111 pages [2010-06-10 10:45:57 14488] INFO (XendCheckpoint:474) Total pages sent= 131295 (0.99x) [2010-06-10 10:45:57 14488] INFO (XendCheckpoint:474) (of which 0 were fixups) [2010-06-10 10:45:57 14488] INFO (XendCheckpoint:474) All memory is saved [2010-06-10 10:45:57 14488] INFO (XendCheckpoint:474) Save exit rc=0 [2010-06-10 10:45:57 14488] INFO (XendCheckpoint:123) Domain 22 suspended. [2010-06-10 10:45:57 14488] DEBUG (XendDomainInfo:2757) XendDomainInfo.destroy: domid=22 [2010-06-10 10:45:58 14488] DEBUG (XendDomainInfo:2227) Destroying device model [2010-06-10 10:45:58 14488] INFO (image:567) migrating-test device model terminated [2010-06-10 10:45:58 14488] DEBUG (XendDomainInfo:2234) Releasing devices [2010-06-10 10:45:58 14488] DEBUG (XendDomainInfo:2247) Removing vif/0 [2010-06-10 10:45:58 14488] DEBUG (XendDomainInfo:1137) XendDomainInfo.destroyDevice: deviceClass = vif, device = vif/0 [2010-06-10 10:45:58 14488] DEBUG (XendDomainInfo:2247) Removing vkbd/0 [2010-06-10 10:45:58 14488] DEBUG (XendDomainInfo:1137) XendDomainInfo.destroyDevice: deviceClass = vkbd, device = vkbd/0 [2010-06-10 10:45:58 14488] DEBUG (XendDomainInfo:2247) Removing console/0 [2010-06-10 10:45:58 14488] DEBUG (XendDomainInfo:1137) XendDomainInfo.destroyDevice: deviceClass = console, device = console/0 [2010-06-10 10:45:58 14488] DEBUG (XendDomainInfo:2247) Removing vbd/51712 [2010-06-10 10:45:58 14488] DEBUG (XendDomainInfo:1137) XendDomainInfo.destroyDevice: deviceClass = vbd, device = vbd/51712 [2010-06-10 10:45:58 14488] DEBUG (XendDomainInfo:2247) Removing vfb/0 [2010-06-10 10:45:58 14488] DEBUG (XendDomainInfo:1137) XendDomainInfo.destroyDevice: deviceClass = vfb, device = vfb/0 [2010-06-10 10:45:58 14488] DEBUG (XendDomainInfo:4054) Releasing lock for domain migrating-test [2010-06-10 10:45:59 14488] ERROR (XendDomainInfo:4070) Failed to remove unmanaged directory /var/lib/xen/lock/b01515ae-9173-03cb-0cb7-06f3dfbede8b.

  Read the article

• How to link to a subfolder of a share?

  - by Nicolas Raoul

  On my Windows XP server, a folder called Share2 is shared. It contains a subfolder called folder3. The guest account is protected by a password, which means network users have to type the guest password to access it. When a user types \\server\Share2 in his file explorer, he is prompted for a password. When a user types \\server\Share2\folder3 in his file explorer, an error appears. He is not even prompted for a password. This is problematic because I want to link to this particular folder. How can I link to folder3? Notes: - Both Desktop shortcuts and HTML links in IE7/8 give an error if I link to folder3, but work if I just link to Share2. - Using the file:// syntax instead of the \\ syntax leads to the same results. - Password setting per http://www.lancelhoff.com/how-to-password-protect-a-shared-folder - Not using "Simple File Sharing" - The error message is ???????????????????????? which means "could not find it. check the path and try again". No English Windows around to try, sorry! It is easy to reproduce the problem though, so can anyone post the English error message for the sake of searchability? Thanks!

  Read the article

• Clipboard bug in Wordpad in Windows 7 (accidentally pasting large file into application)

  - by frenchglen

  In Win7, I use Wordpad, and I really like it. For my needs it's lean and fast, yet has the formatting functionalities I'm after when working on my TXT/RTF files on a daily basis. I don't intend to change text editors. There's a really bad bug which has ALWAYS plagued me. If you have a large file contained in the clipboard, like a 238MB FLAC file, and you accidentally paste it into Wordpad for whatever reason - it hangs the application for a VERY long time (like 2 hours, it depends on how big the file is, because it tries to 'handle' it). You either have to close the application and lose any unsaved changes, or go do something else until the item has finished pasting into Wordpad (it actually eventually drops the file's icon in wordpad just like how it appears in Windows Explorer). It's a Windows bug, a Wordpad bug. Is there some solution for this? Or is the problem fixed in Windows 8 (if anyone can tell me)? .....I'm not going to try out Win8 myself, merely to answer this question - that's what I'm asking it on SuperUSer for! I'm really hoping it's one of those little-yet-big things that they've fixed in Win8 (like removing the 255-character file path limit in Explorer, which is awesome). Thank you for your help, if you have Win8 handy and can test this. :)

  Read the article

< Previous Page | 623 624 625 626 627 628 629 630 631 632 633 634  | Next Page >