Search Results

Search found 1863 results on 75 pages for 'clone of anton makrushin'.

Page 63/75 | < Previous Page | 59 60 61 62 63 64 65 66 67 68 69 70  | Next Page >

• Mercurial confusion - commit / push, backouts

  - by Madmanguruman

  I'm trying to set up a repository on a shared filesystem. I'm using Mercurial 2.1.2 on a Windows-based architecture. I start with an empty folder on the shared filesystem and create a repository in it. After this, I dump in the baseline files, and add them to versioning, then commit the changes. I then clone the repository to my local hard drive. I then make a change in my local repository, commit it, then push back to the shared filesystem repository. The shared repo graph I get in TortoiseHG looks strange (to me). This is the shared repo: This is the local repo: On the shared repo, the working directory always shows up on the top, then the graph goes 'down' to rev. 0 then back 'up' again through various revisions. It looks to me like I have two different branches, even though everything is on the default branch. Also, that 'top' revision always says "* Working Directory * Not a head revision!" I noticed that in my local repository, I don't get that dangling working directory at the top of the list - everything is in one branch. I also noticed that on my local repository, I can back out the tip revision with no problem. On the shared filesystem repository, I cannot, since I get an error ("Cannot backout change on a different branch"). How can this be? Aren't they supposed to be identical to each other? Am I fundamentally doing something wrong?

  Read the article

• How to use git to manage one codebase but have different environments

  - by emostar

  I'm using git for a personal project at the moment and have run into a problem of having one codebase for two different environments and was wondering what the cleanest way to use git would be. Main Desktop I Use this machine for most of my development. I have a git repository here that I cloned off of an empty repository that I use on my internal server. I do most of my work here and push back to the internal server so I can use that as a master of truth and to ease making backups. Laptop I sometimes want to code on the road, so I did a clone from the internal server and created a new branch called "laptop-branch". Unfortunately some directories MSVC++ version are different than from the Main Desktop environment. I just modified the files in the "laptop-branch" and committed them there. Now I did a lot of changes while on vacation with my laptop, and want to push them to origin, but don't want the changes I made that were related to directories and compiler versions to be pushed back to origin. What would be the best way to get this done?

  Read the article

• solution for an offline server

  - by dashmug

  I'm trying to setup a development server at work that will ideally be able to test drive a couple of projects in PHP, Rails, or Django (not always running at the same time). I develop the apps locally on a Mac and then I'll put the projects up on this server for testing with my actual users (non-techies) before deploying to a production server. My problem is that we have a very poor internet connection (almost negligible) at work and doing the usual apt-get/yum/ports (make, clean, install) processes for setting up servers always get their packages from online repositories somewhere. I know I could probably download the source and then compile them myself but that's going to be too much of a hassle for me. I'm thinking about two solutions: Plan A: Run a server VM on my Mac and then use this VM as the source repository for the offline server. I've read about Ubuntu's apt-proxy and it seems to be good enough though I haven't tried it yet. I'm not sure if this is possible but can I simply do apt-get install nginx --downloadonly so that the package and its dependencies will be downloaded into my VM and my server can use the VM as the source repo for apt-get? Plan B: Run a server VM on my Mac (which I can setup/update easily when I'm home) and then clone the VM to the offline development server. Maybe I should simply make the server a VM host so I can simply copy the VM over. I think this is okay for the first-time setup but subsequent updates will take too long (cloning the VM image). If I was working on Windows, I imagine it'd be easier because most services have an installer file that I can download and then run at the server. If you could suggest another way, it would be much appreciated. Update: From Michael Hampton's answer, I found a possible solution which is apt-cacher. I also found this page on Ubuntu's website. I wonder if there is a better tool than this one.

  Read the article

• Windows 7 Synchronize folders BUT while some files are open

  - by Nick

  I need some way to synchronize 2 drives I have. I want to do this ofter (once a day or so) There is the main drive that I want to clone/synchronize on a backup hard disk. The problem is in that there is an open TrueCrypt file mounted as a drive, and its live. If you don't know what true crypt is, basically you create a file on a hard disk and that file is encrypted. It's constantly open and modified live. Also Its pretty large. 100GB + I will use freefilesync . There are many tools that can do that. My question is, is it safe to copy the encrypted file while its open ? Does the software freeze the file in one state and copies it ? Or will I get a corrupted file on the other drive ? It was not clear to me how windows handles that. I read something about shadow copy, and the software says that it supports this. Does anyone know something on the matter that can help me ? or some software that will work ok in my scenario ? Thanks

  Read the article

• VMware ESX Linux Guest Customization

  - by andyh_ky

  Hello, I am interested in deploying several RHEL 4 Update 8 virtual machines for creation of a test environment. Here are the steps I am taking: In off hours, P2V/V2V the production machines and convert them to templates Deploy the virtual machines with a customization specification that changes hostname, IP address I am interested in how these processes are done and if there are any options for further customization. Are the machines brought on the network when they are powered on, before they are reconfigured? Is there a potential IP address conflict? Is there an option to run additional scripts which reside on the guest as a part of the reconfiguration? For example, restoring an Oracle Database. This is an option with Windows guests and sysprep, but I have been unable to locate anything showing a RHEL equivalent. I am dealing with a multi tier application. The main issue I am attempting to mitigate is that the application servers reference database servers by hostname and in tnsnames files. I am interested in scripting the reconfiguration of the application in the deployment so that the app/db servers are pointing to the test environment. I am OK with placing the 'cleanup' script on the source and executing it after the machine has been brought up. I am interested in the automation of the script's execution post clone/boot, as well as if there could be an IP address conflict. (cross posted to VMTN's ESX 4 community)

  Read the article

• Automatic switching of network card when vm is moved

  - by spock

  I have two hosts in a pool and I used to be able to move the vm around and they will start without any problem. But after I played around with some network setting, which I don't remember what, I started getting "This VM needs storage that cannot be seen from that server" message. As you can tell I am a beginner with Xenserver. Here is the very simple environment: 2 host servers with their own local hard disk and network card. One is a Pool master. Problem: Power off a vm and move vm from one server to another, or clone one vm to the other server. It used to be able to start up right away. Now, I need to delete one of the network that does not belong to the server, then it will start. Otherwise, the above error msg popup. The two networks (one for each network card in each host) are in the Networking tab of the vm, as well as in the host's networking tab. I googled but all I got to empty the DVD drive, which is not the problem here. Thanks in advance!

  Read the article

• Is there any equivalence of `--depth immediates` in `git`?

  - by ???

  Currently, I'm try to setup git front-end to the Subversion repository. My Subversion repository is a single large repository which consists of several co-related projects: svn-root |-- project1 | |-- branches | |-- tags | `-- trunk |-- project2 | |-- branches | |-- tags | `-- trunk `-- project3 |-- branches |-- tags `-- trunk Because it's sometimes needs to move files between different projects, so I don't want to break the repository to separate ones. I'm going to use git-svn to setup a git front-end, but I don't see how to exactly mapping the svn to git structure. The two systems treat branches and tags very different and I doubt it is possible. To simplify the problem, I would just git svn clone the whole root directory and let branches/tags/trunk directories just sit there. But this will definitely result in too many files in branches and tags directories. In Subversion, it's easy to just set the depth of checkout to immediates, which will only checkout the branch/tag titles, without the directory contents. but I don't know if this can be done in git. The git-svn messed me up. I hope there's more elegant solution.

  Read the article

• Communication Between Your PC and Azure VM via Windows Azure Connect

  - by Shaun

  With the new release of the Windows Azure platform there are a lot of new features available. In my previous post I introduced a little bit about one of them, the remote desktop access to azure virtual machine. Now I would like to talk about another cool stuff – Windows Azure Connect.   What’s Windows Azure Connect I would like to quote the definition of the Windows Azure Connect in MSDN With Windows Azure Connect, you can use a simple user interface to configure IP-sec protected connections between computers or virtual machines (VMs) in your organization’s network, and roles running in Windows Azure. IP-sec protects communications over Internet Protocol (IP) networks through the use of cryptographic security services. There’s an image available at the MSDN as well that I would like to forward here As we can see, using the Windows Azure Connect the Worker Role 1 and Web Role 1 are connected with the development machines and database servers which some of them are inside the organization some are not. With the Windows Azure Connect, the roles deployed on the cloud could consume the resource which located inside our Intranet or anywhere in the world. That means the roles can connect to the local database, access the local shared resource such as share files, folders and printers, etc.   Difference between Windows Azure Connect and AppFabric It seems that the Windows Azure Connect are duplicated with the Windows Azure AppFabric. Both of them are aiming to solve the problem on how to communication between the resource in the cloud and inside the local network. The table below lists the differences in my understanding. Category Windows Azure Connect Windows Azure AppFabric Purpose An IP-sec connection between the local machines and azure roles. An application service running on the cloud. Connectivity IP-sec, Domain-joint Net Tcp, Http, Https Components Windows Azure Connect Driver Service Bus, Access Control, Caching Usage Azure roles connect to local database server Azure roles use local shared files,  folders and printers, etc. Azure roles join the local AD. Expose the local service to Internet. Move the authorization process to the cloud. Integrate with existing identities such as Live ID, Google ID, etc. with existing local services. Utilize the distributed cache.   And also some scenarios on which of them should be used. Scenario Connect AppFabric I have a service deployed in the Intranet and I want the people can use it from the Internet.   Y I have a website deployed on Azure and need to use a database which deployed inside the company. And I don’t want to expose the database to the Internet. Y   I have a service deployed in the Intranet and is using AD authorization. I have a website deployed on Azure which needs to use this service. Y   I have a service deployed in the Intranet and some people on the Internet can use it but need to be authorized and authenticated.   Y I have a service in Intranet, and a website deployed on Azure. This service can be used from Internet and that website should be able to use it as well by AD authorization for more functionalities. Y Y   How to Enable Windows Azure Connect OK we talked a lot information about the Windows Azure Connect and differences with the Windows Azure AppFabric. Now let’s see how to enable and use the Windows Azure Connect. First of all, since this feature is in CTP stage we should apply before use it. On the Windows Azure Portal we can see our CTP features status under Home, Beta Program page. You can send the apply to join the Beta Programs to Microsoft in this page. After a few days the Microsoft will send an email to you (the email of your Live ID) when it’s available. In my case we can see that the Windows Azure Connect had been activated by Microsoft and then we can click the Connect button on top, or we can click the Virtual Network item from the left navigation bar.   The first thing we need, if it’s our first time to enter the Connect page, is to enable the Windows Azure Connect. After that we can see our Windows Azure Connect information in this page.   Add a Local Machine to Azure Connect As we explained below the Windows Azure Connect can make an IP-sec connection between the local machines and azure role instances. So that we firstly add a local machine into our Azure Connect. To do this we will click the Install Local Endpoint button on top and then the portal will give us an URL. Copy this URL to the machine we want to add and it will download the software to us. This software will be installed in the local machines which we want to join the Connect. After installed there will be a tray-icon appeared to indicate this machine had been joint our Connect. The local application will be refreshed to the Windows Azure Platform every 5 minutes but we can click the Refresh button to let it retrieve the latest status at once. Currently my local machine is ready for connect and we can see my machine in the Windows Azure Portal if we switched back to the portal and selected back Activated Endpoints node.   Add a Windows Azure Role to Azure Connect Let’s create a very simple azure project with a basic ASP.NET web role inside. To make it available on Windows Azure Connect we will open the azure project property of this role from the solution explorer in the Visual Studio, and select the Virtual Network tab, check the Activate Windows Azure Connect. The next step is to get the activation token from the Windows Azure Portal. In the same page there is a button named Get Activation Token. Click this button then the portal will display the token to me. We copied this token and pasted to the box in the Visual Studio tab. Then we deployed this application to azure. After completed the deployment we can see the role instance was listed in the Windows Azure Portal - Virtual Connect section.   Establish the Connect Group The final task is to create a connect group which contains the machines and role instances need to be connected each other. This can be done in the portal very easy. The machines and instances will NOT be connected until we created the group for them. The machines and instances can be used in one or more groups. In the Virtual Connect section click the Groups and Roles node from the left side navigation bar and clicked the Create Group button on top. This will bring up a dialog to us. What we need to do is to specify a group name, description; and then we need to select the local computers and azure role instances into this group. After the Azure Fabric updated the group setting we can see the groups and the endpoints in the page. And if we switch back to the local machine we can see that the tray-icon have been changed and the status turned connected. The Windows Azure Connect will update the group information every 5 minutes. If you find the status was still in Disconnected please right-click the tray-icon and select the Refresh menu to retrieve the latest group policy to make it connected.   Test the Azure Connect between the Local Machine and the Azure Role Instance Now our local machine and azure role instance had been connected. This means each of them can communication to others in IP level. For example we can open the SQL Server port so that our azure role can connect to it by using the machine name or the IP address. The Windows Azure Connect uses IPv6 to connect between the local machines and role instances. You can get the IP address from the Windows Azure Portal Virtual Network section when select an endpoint. I don’t want to take a full example for how to use the Connect but would like to have two very simple tests. The first one would be PING.   When a local machine and role instance are connected through the Windows Azure Connect we can PING any of them if we opened the ICMP protocol in the Filewall setting. To do this we need to run a command line before test. Open the command window on the local machine and the role instance, execute the command as following netsh advfirewall firewall add rule name="ICMPv6" dir=in action=allow enable=yes protocol=icmpv6 Thanks to Jason Chen, Patriek van Dorp, Anton Staykov and Steve Marx, they helped me to enable  the ICMPv6 setting. For the full discussion we made please visit here. You can use the Remote Desktop Access feature to logon the azure role instance. Please refer my previous blog post to get to know how to use the Remote Desktop Access in Windows Azure. Then we can PING the machine or the role instance by specifying its name. Below is the screen I PING my local machine from my azure instance. We can use the IPv6 address to PING each other as well. Like the image following I PING to my role instance from my local machine thought the IPv6 address.   Another example I would like to demonstrate here is folder sharing. I shared a folder in my local machine and then if we logged on the role instance we can see the folder content from the file explorer window.   Summary In this blog post I introduced about another new feature – Windows Azure Connect. With this feature our local resources and role instances (virtual machines) can be connected to each other. In this way we can make our azure application using our local stuff such as database servers, printers, etc. without expose them to Internet.   Hope this helps, Shaun All documents and related graphics, codes are provided "AS IS" without warranty of any kind. Copyright © Shaun Ziyan Xu. This work is licensed under the Creative Commons License.

  Read the article

• How to use crontab, .netrc, and git push?

  - by Jon

  Hi all, I am in the process of automating the backups from various servers to a central point then pushing those config changes into a git repo so i can track any changes over time. The rest of the scripts are working well, I can copy / rsync the files across the network to a central point. The last script is to get the config files to be put into / updated in repository. The script is as follows: #!/bin/bash clear SERVERNAME="betty" SCRIPTDIR="/home/jon" GITROOT="/tmp/git" TEMPROOT="/tmp/backups" BACKUPROOTDIR="/mnt/backups" echo " - running as user: $UID" echo "backingup git config on $SERVERNAME" echo "" # check to see if root backup folder exists, otherwise create it. if [ -d $GITROOT ]; then rm -rf $GITROOT fi mkdir $GITROOT cd $GITROOT echo " - testing if home is where I think it should be!" echo $HOME echo " - testing if it can see netrc" tail $HOME/.netrc git clone http://192.168.10.97:8000/repositories/HOH-config-backups.git cd HOH-config-backups echo " - copy Configuration Folders across" cp -r $BACKUPROOTDIR/Configuration/* $GITROOT/HOH-config-backups/ cp -r $BACKUPROOTDIR/scripts $GITROOT/HOH-config-backups/ git add . git commit -a -m "committing any new configuration changes!" git push origin master echo "" echo "Git repo updated" echo "" echo " - backing up this script" FIREWIGSCRIPTLOC="$BACKUPROOTDIR/scripts/$SERVERNAME" if [ ! -d $FIREWIGSCRIPTLOC ]; then mkdir $FIREWIGSCRIPTLOC fi cp /home/jon/gitConfig.sh $FIREWIGSCRIPTLOC The git repo is on a different machine in the network using Apache and HTTP-backend.exe (smart HTTP protocol). If I run this script as me "jon" it works. If I run it in crontab it fails. git uses the /home/jon/.netrc file for authentication: machine 192.168.10.97 login gitconfig password 1234579 The log from crontab is: TERM environment variable not set. - running as user: 1000 backingup git config on betty - testing if home is where I think it should be! /home/jon - testing if it can see netrc machine 192.168.10.97 login gitconfig password 1234579 got 08de5bc2b27b4940d9412256e76d5e3c3d9dbcdd walk 08de5bc2b27b4940d9412256e76d5e3c3d9dbcdd got be880f2d306778a538d592e7a02eb19f416612f7 got bd387e8def9f77aafa798bf53e80d949aba443e8 got 1bc1a59e12775841d4c59d77c63b8a73823138c2 walk bd387e8def9f77aafa798bf53e80d949aba443e8 Getting alternates list for http://192.168.10.97:8000/repositories/HOH-config-backups.git got 030512237bca72faf211e0e8ec2906164eac34f6 got 9bc2f575240bc1f61ff7d69777ce1a165d06b184 got b8400f7f01429104a9d4786a6bb1a16d293e37c1 got 2403b5bf611010e0b401f776f0e23b09ce744838 got 1a27944c48269ef3608a8f2466e43402d06faac0 got b686f45b7d57af4fa8ca0d528bb85216d6247e19 Getting pack list for http://192.168.10.97:8000/repositories/HOH-config-backups.git Getting index for pack ae881957c0f0e8c22eb6cc889a22ef78eb4ce6ff Getting pack ae881957c0f0e8c22eb6cc889a22ef78eb4ce6ff which contains ff84d6d48e9326066438d167a10251218d612b3d walk b686f45b7d57af4fa8ca0d528bb85216d6247e19 got 364e30daec17814073e668f490bb84af891fe1f7 got 23f6497e7f9b80e0d90adad73bd0407a0e5ac6ce got 9e77c47574b5e23ea669afe0c23ab235e4917ee1 got 6654e0d328a216b3783e98c47206cb2d01b3353d got 28821ffd437d2689ffb82c6e4b9c3f5372c95c4b got 8c384a24f645389e4d4b08013c79e9e73a658342 got d203be0123736ee025ce20c081f1489098648dfc got 1852603bf7709e71417d8ccec02390279d533642 got fb753a26b20b04694419fce8ecdaa8dbec105cf1 got 736028997cd84dd1c135f57e9d246674b9cd0b9d got 7af836249e20096d0476a548d5be702a071cdd4b got 240dc39d9db50df63073fc7927b2d002dfa0f54c got 93abd36e3935a01011eb753b635a1a0e984bf31e got c6269e28fecf4d8d0d98b9358aecb3acff02df44 got b0aa29432f73e64032682a351d436c24b14078ab walk 240dc39d9db50df63073fc7927b2d002dfa0f54c got 58fb66d9f35f8a5e32ff4683309c5f0c2a3a03c5 got 0da2def4de0565483cdbe6b87418ee2beb122e58 got 0f6a86c6f87ed52ad2ed01e5c6edd661d364930c got 437a93d27b5bb89c739a0564a34a616e832c3ebe got fe0385abe5c0acd8462268dac330bae00e934f1b got 24259f8f5c5c9ee974a75fe3d1e07c02e3e20fe9 got d29f624bf1a5eceedaa86c10fee35f62747c7d04 got 0154e4c987132585ea7a92b77d02dba285512d6b got eda8bf526567c25ee70addb2ad3c3c6aa57eac77 got 9f3d9d7262d66f9fa4f6a13b7c86199953f4bc4e got 8e20881e19667aa22245d0598646991067455a4d got abb1123145689b35eb19519952c71253ee45fa98 got dfeff593c79b4156ce2ce1adf043d0e80356488c got e20c5b48b1d360e0bcf34189e3f3d2bbf23e92cc got b13eb81cc274780322ecf786372320343926bec9 walk 8de83868b3fac748b0a55eba16c8f668ec852abb got b5961421bbc42afe7a07cc1c8b615aba26ba74d7 got 2650ba819019df4193b482733e29ca79b29f3f2c got b3111e1be8103e91803a97a817ed81f28025aca1 got b060be934d709684f5eb5dad3c03932a3589e864 got cf70d2043f081d7a4438e9d5a290a9f986c84060 got 80bf0f1cc836feab86d6935bb7968d8555a8d531 got da318d167920e34bc6573e4fc236249ccbbee316 got d82ac853d387b760149599e6e1ab96403f6ec672 got 0005f691d1f46550fdb4e56025f52e30a5b18cc2 Initialized empty Git repository in /tmp/git/HOH-config-backups/.git/ - copy Configuration Folders across Created commit 424df2f: committing any new configuration changes! 3 files changed, 55 insertions(+), 1 deletions(-) create mode 100755 scripts/betty/gitConfig.sh error: Cannot access URL http://192.168.10.97:8000/repositories/HOH-config-backups.git/, return code 22 error: failed to push some refs to 'http://192.168.10.97:8000/repositories/HOH-config-backups.git' Git repo updated - backing up this script cp: cannot create regular file `/mnt/backups/scripts/betty/gitConfig.sh': Permission denied my crontab is: # m h dom mon dow command 04 * * * * /home/jon/gitConfig.sh > /tmp/gitconfig.log 2>&1 I open it by doing: $crontab -e i.e. not as root. I am a bit confused as to why it is not running as my user (or what user id 1000 is). Not sure what I need to do to get the push with git to work within crontab. edit: found out about the userid: jon@betty:~$ id uid=1000(jon) gid=1000(jon) groups=4(adm),20(dialout),24(cdrom),46(plugdev),109(sambashare),114(lpadmin),115(admin),1000(jon) here is my $HOME/.gitconfig file: [user] name = Jon Hawkins email = [email protected] Thanks

  Read the article

• No more internet connection after update in 14.04 with Intel Dual Band Wireless AC 7260

  - by luis

  My Dell XPS 15 (haswell) was working fine until I stupidly accepted recently to apply Ubuntu updates. Since then, my wifi does not work (it shows "device not managed" when clicking wifi icon in toolbar). Even USB to Ethernet adapter does not seem to work. Bluetooth at least "sees" other bluetooth devices around... See below output from dmesg (dmesg |grep iwl) : [ 886.462459] iwlwifi 0000:06:00.0: irq 51 for MSI/MSI-X [ 886.462561] iwlwifi 0000:06:00.0: Direct firmware load failed with error -2 [ 886.462562] iwlwifi 0000:06:00.0: Falling back to user helper [ 886.463284] iwlwifi 0000:06:00.0: loaded firmware version 22.1.7.0 op_mode iwlmvm [ 886.475345] iwlwifi 0000:06:00.0: Detected Intel(R) Dual Band Wireless AC 7260, REV=0x144 [ 886.475433] iwlwifi 0000:06:00.0: L1 Enabled; Disabling L0S [ 886.475684] iwlwifi 0000:06:00.0: L1 Enabled; Disabling L0S [ 886.689214] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs' Below the output from modinfo iwlwifi: filename: /lib/modules/3.13.0-29- generic/kernel/drivers/net/wireless/iwlwifi/iwlwifi.ko license: GPL author: Copyright(c) 2003-2013 Intel Corporation <[email protected]> version: in-tree: description: Intel(R) Wireless WiFi driver for Linux firmware: iwlwifi-100-5.ucode firmware: iwlwifi-1000-5.ucode firmware: iwlwifi-135-6.ucode firmware: iwlwifi-105-6.ucode firmware: iwlwifi-2030-6.ucode firmware: iwlwifi-2000-6.ucode firmware: iwlwifi-5150-2.ucode firmware: iwlwifi-5000-5.ucode firmware: iwlwifi-6000g2b-6.ucode firmware: iwlwifi-6000g2a-5.ucode firmware: iwlwifi-6050-5.ucode firmware: iwlwifi-6000-4.ucode firmware: iwlwifi-3160-7.ucode firmware: iwlwifi-7260-7.ucode srcversion: 1E6912E109D5A43B310FB34 alias: pci:v00008086d0000095Asv*sd00005490bc*sc*i* (a pack of lines of kind "alias: pci:xxxxx...." that I guess are not helpful) alias: pci:v00008086d0000095Bsv*sd00005290bc*sc*i* depends: cfg80211 intree: Y vermagic: 3.13.0-29-generic SMP mod_unload modversions signer: Magrathea: Glacier signing key sig_key: 66:02:CB:36:F1:31:3B:EA:01:C4:BD:A9:65:67:CF:A7:23:C9:70:D8 sig_hashalgo: sha512 parm: swcrypto:using crypto in software (default 0 [hardware]) (int) parm: 11n_disable:disable 11n functionality, bitmap: 1: full, 2: disable agg TX, 4: disable agg RX, 8 enable agg TX (uint) parm: amsdu_size_8K:enable 8K amsdu size (default 0) (int) parm: fw_restart:restart firmware in case of error (default true) (bool) parm: antenna_coupling:specify antenna coupling in dB (defualt: 0 dB) (int) parm: wd_disable:Disable stuck queue watchdog timer 0=system default, 1=disable, 2=enable (default: 0) (int) parm: nvm_file:NVM file name (charp) parm: bt_coex_active:enable wifi/bt co-exist (default: enable) (bool) parm: led_mode:0=system default, 1=On(RF On)/Off(RF Off), 2=blinking, 3=Off (default: 0) (int) parm: power_save:enable WiFi power management (default: disable) (bool) parm: power_level:default power save level (range from 1 - 5, default: 1) (int) I downloaded the latest versions of iwlwifi firmware from git (git clone git://git.kernel.org/pub/scm/linux/kernel/git/firmware/linux-firmware.git; copy iwlwifi-3160-9.ucode iwlwifi-7260-9.ucode iwlwifi-7265-9.ucode to /lib/firmware and reboot) but as you can imagine it did not help. Update #1: Downloaded from http://wireless.kernel.org/en/users/Drivers/iwlwifi?action=AttachFile&do=get&target=iwlwifi-7260-ucode-22.15.8.0.tgz and copied the file into /lib/firmware. After reloading it with modprobe, it seems to be OK: [ 14.761283] iwlwifi 0000:06:00.0: enabling device (0000 -> 0002) [ 14.761472] iwlwifi 0000:06:00.0: irq 51 for MSI/MSI-X [ 14.772478] iwlwifi 0000:06:00.0: loaded firmware version 22.15.8.0 op_mode iwlmvm [ 14.800274] iwlwifi 0000:06:00.0: Detected Intel(R) Dual Band Wireless AC 7260, REV=0x144 [ 14.800349] iwlwifi 0000:06:00.0: L1 Enabled; Disabling L0S [ 14.800657] iwlwifi 0000:06:00.0: L1 Enabled; Disabling L0S [ 15.007048] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs' However, clicking in wifi in the toolbar still shows "device not managed". Any clues? Many thanks! Luis

  Read the article

• upgraded "Compiz' and "Unity", now no Unity 3D on screen

  - by user18432

  Today when I logged in to my Ubuntu 12.04, the update manager told me of some upgrades. Compiz and Unity were in those upgrades. After I installed the upgrades, I can no longer get the Unity panel on the left side of screen or the systray at the top of screen. I now have to run Ubuntu 12.04 with Unity 2D. My laptop is a HP Pavilion dv9000 with Nvidia GeForce Go 7600 video. I tried to run "unity --reset" but it says there are serious issues with compiz. I have cut & pasted the read out from the terminal below. [09:35:02] xxxxxxx@L01U1204:~$ unity --reset unity-panel-service: no process found Checking if settings need to be migrated ...no Checking if internal files need to be migrated ...no Backend : gconf Integration : true Profile : unity Adding plugins Initializing core options...done compiz (core) - Warn: failed to receive ConfigureNotify event on 0x2e00004 compiz (core) - Warn: failed to receive ConfigureNotify event on 0x580005a compiz (core) - Warn: failed to receive ConfigureNotify event on 0x3600006 compiz (core) - Warn: failed to receive ConfigureNotify event on 0x3200255 compiz (core) - Warn: failed to receive ConfigureNotify event on 0x1600002 compiz (core) - Warn: failed to receive ConfigureNotify event on 0x1400002 Initializing composite options...done Initializing opengl options...done Initializing decor options...done Initializing vpswitch options...done Initializing snap options...done Initializing mousepoll options...done Initializing resize options...done Initializing place options...done Initializing move options...done Initializing wall options...done Initializing grid options...done I/O warning : failed to load external entity "/home/brwright/.compiz/session/10afaca1703486b216133648409481824100000130110002" Initializing session options...done Initializing gnomecompat options...done Initializing animation options...done Initializing fade options...done Initializing unitymtgrabhandles options...done Initializing workarounds options...done Initializing scale options...done compiz (expo) - Warn: failed to bind image to texture Initializing expo options...done Initializing ezoom options...done compiz (core) - Error: Couldn't load plugin '/usr/lib/compiz/libunityshell.so' : /usr/lib/compiz/libunityshell.so: undefined symbol: _ZNK5unity4dash10Controller6windowEv compiz (core) - Error: Couldn't load plugin 'unityshell' compiz (core) - Warn: unhandled ConfigureNotify on 0x7000090! compiz (core) - Warn: this should never happen. you should probably file a bug about this. compiz (core) - Warn: unhandled ConfigureNotify on 0x7000093! compiz (core) - Warn: this should never happen. you should probably file a bug about this. compiz (core) - Warn: unhandled ConfigureNotify on 0x7000096! compiz (core) - Warn: this should never happen. you should probably file a bug about this. compiz (core) - Warn: unhandled ConfigureNotify on 0x7000099! compiz (core) - Warn: this should never happen. you should probably file a bug about this. compiz (core) - Warn: unhandled ConfigureNotify on 0x700009c! compiz (core) - Warn: this should never happen. you should probably file a bug about this. compiz (core) - Warn: unhandled ConfigureNotify on 0x700009f! compiz (core) - Warn: this should never happen. you should probably file a bug about this. Initializing annotate options...done Initializing blur options...done Initializing clone options...done Initializing colorfilter options...done Initializing commands options...done Initializing cube options...done Initializing imgjpeg options...done Initializing kdecompat options...done Initializing mag options...done Initializing neg options...done Initializing obs options...done Initializing opacify options...done Initializing put options...done Initializing resizeinfo options...done Initializing ring options...done Initializing rotate options...done Initializing scaleaddon options...done Initializing screenshot options...done Initializing shift options...done Initializing staticswitcher options...done Initializing switcher options...done Initializing thumbnail options...done Initializing unityshell options...done Initializing water options...done Initializing winrules options...done Initializing wobbly options...done Setting Update "main_menu_key" Setting Update "run_key" Starting gtk-window-decorator As you can see the terminal never comes back to the CI prompt. I must do a control C to get to the CI prompt, but then the OS is frozen. I have to reboot and run Unity 2D in able to do anything on my laptop. I hope I have explained this enough and provided some useful info. I am at a loss to understand what the problem is, or what exactly what is causing the problem. Is it Unity or Compiz? Can anyone help?

  Read the article

• Scid Chess Program Compiling issue

  - by lbochitt

  First of all I would like to point that I'm new to Ubuntu so sorry if what I am asking is ridiculous. I have downloaded Scid 4.4 chess program and I have tried to compile it as it was explained on its website: 1) Initialize git. 2) Create a folder where you want to download and (?) compile the source, then cast: git init on your command line. 3) You're now ready to download the sources recall Fulvio's spell: git clone git://scid.git.sourceforge.net/gitroot/scid/scid This should get you the latest Scid source. 4) You're now ready to compile Scid. In principle, all you need to do is: ./configure and then make 5) If you get stuck, you probably need to get developer versions of tcl/tk. This translates into issuing these three commands: sudo apt-get install tcl8.5-dev sudo apt-get install tk8.5-dev sudo apt-get install zlib1g -dev 6) You should now be ready to compile The problem is that when I run ./configure to start compiling the following message appears on Terminal: configure: Makefile configuration program for Scid Tcl/Tk version: 8.5 Your operating system is: Linux 3.8.0-19-generic Location of "tcl.h": /usr/include/tcl8.5 Location of "tk.h": /usr/include/tcl8.5 Location of Tcl 8.5 library: not found Location of Tk 8.5 library: not found Checking if your system already has zlib installed: yes. Using Makefile.conf. Not all settings could be determined! The default Makefile was written. You will need to edit it before you can compile Scid. What should I do? Has anybody faced this problem before? Thanks in advance I have run ls -l /usr/include/tcl8.5/tcl.h here's the result: -rw-r--r-- 1 root root 87291 abr 22 10:45 /usr/include/tcl8.5/tcl.h I have also tried what you suggested Could you run git reset --hard HEAD and git clean -d -f to clean up everything using Git? Then run ./configure again. Just a shot in the dark - I've seen some GNU automake stuff still listening to its "cached" version of the results or something. Still no solution. I don't know why it can't recognize the library though it is installed I opened configure to see where the program looked for the library. This is the code: # libraryPath: List of possible locations of Tcl/Tk library. set libraryPath { /usr/lib /usr/lib64 /usr/local/tcl/lib /usr/local/lib /usr/X11R6/lib /opt/tcltk/lib /usr/lib/x86_64-linux-gnu } lappend libraryPath "/usr/lib/tcl${tclv}" lappend libraryPath "/usr/lib/tk${tclv}" lappend libraryPath "/usr/lib/tcl${tclv_nodot}" lappend libraryPath "/usr/lib/tk${tclv_nodot}" # Try to add tcl_library and auto_path values to libraryPath, # in case the user has a non-standard Tcl/Tk library location: if {[info exists ::tcl_library]} { lappend headerPath \ [file join [file dirname [file dirname $::tcl_library]] include] lappend libraryPath [file dirname $::tcl_library] lappend libraryPath $::tcl_library } if {[info exists ::auto_path]} { foreach name $::auto_path { lappend libraryPath $name } } if {! [info exists var(TCL_INCLUDE)]} { puts -nonewline { Location of "tcl.h": } set opt(tcl_h) [findDir "tcl.h" $headerPath "TCL_VERSION.*$tclv"] if {$opt(tcl_h) == ""} { puts "not found" set success 0 set opt(tcl_h) "$::defaultVar(TCL_INCLUDE)" } else { puts $opt(tcl_h) } } set opt(tcl_lib) "" if {! [info exists var(TCL_LIBRARY)]} { puts -nonewline " Location of Tcl $tclv library: " set opt(tcl_lib) [findDir "libtcl${tclv}.*" $libraryPath] if {$opt(tcl_lib) == ""} { set opt(tcl_lib) [findDir "libtcl${tclv_nodot}.*" $libraryPath] if {$opt(tcl_lib) == ""} { puts "not found" set success 0 set opt(tcl_lib) "$opt(tcl_h)" set opt(tcl_lib_file) "tcl\$(TCL_VERSION)" } else { set opt(tcl_lib_file) "tcl${tclv_nodot}" puts $opt(tcl_lib) } } else { set opt(tcl_lib_file) "tcl\$(TCL_VERSION)" puts $opt(tcl_lib) } } if {! [info exists var(TCL_INCLUDE)]} { set var(TCL_INCLUDE) "-I$opt(tcl_h)" } if {! [info exists var(TCL_LIBRARY)]} { set var(TCL_LIBRARY) "-L$opt(tcl_lib) -l$opt(tcl_lib_file)" } return $success So I guess (And by guess I mean i have no idea how to code) I should write somewhere in here usr/lib/tcl8.5 and usr/lib/tk8.5, am I right?

  Read the article

• Useful SVN and Git commands – Cheatsheet

  - by Madhan ayyasamy

  The following snippets will helpful one who user version control systems like Git and SVN.svn checkout/co checkout-url – used to pull an SVN tree from the server.svn update/up – Used to update the local copy with the changes made in the repository.svn commit/ci – m “message” filename – Used to commit the changes in a file to repository with a message.svn diff filename – shows up the differences between your current file and what’s there now in the repository.svn revert filename – To overwrite local file with the one in the repository.svn add filename – For adding a file into repository, you should commit your changes then only it will reflect in repository.svn delete filename – For deleting a file from repository, you should commit your changes then only it will reflect in repository.svn move source destination – moves a file from one directory to another or renames a file. It will effect your local copy immediately as well as on the repository after committing.git config – Sets configuration values for your user name, email, file formats and more.git init – Initializes a git repository – creates the initial ‘.git’ directory in a new or in an existing project.git clone – Makes a Git repository copy from a remote source. Also adds the original location as a remote so you can fetch from it again and push to it if you have permissions.git add – Adds files changes in your working directory to your index.git rm – Removes files from your index and your working directory so they will not be tracked.git commit – Takes all of the changes written in the index, creates a new commit object pointing to it and sets the branch to point to that new commit.git status – Shows you the status of files in the index versus the working directory.git branch – Lists existing branches, including remote branches if ‘-a’ is provided. Creates a new branch if a branch name is provided.git checkout – Checks out a different branch – switches branches by updating the index, working tree, and HEAD to reflect the chosen branch.git merge – Merges one or more branches into your current branch and automatically creates a new commit if there are no conflicts.git reset – Resets your index and working directory to the state of your last commit.git tag – Tags a specific commit with a simple, human readable handle that never moves.git pull – Fetches the files from the remote repository and merges it with your local one.git push – Pushes all the modified local objects to the remote repository and advances its branches.git remote – Shows all the remote versions of your repository.git log – Shows a listing of commits on a branch including the corresponding details.git show – Shows information about a git object.git diff – Generates patch files or statistics of differences between paths or files in your git repository, or your index or your working directory.gitk – Graphical Tcl/Tk based interface to a local Git repository.

  Read the article

• Url rewrite subfolder to root and forbid accessing subfolder

  - by Alessandro Pezzato

  I have drupal installed in a subfolder drupal, but I want to access pages as it is in root folder: http://www.example.com instead of http://www.example.com/drupal I'm able to have this working, but it's also working with url containing subfolder, so I have http://www.example.com and a clone site in http://www.example.com/drupal What is the rule to forbid access to subfolder? I want all url starting with http://www.example.com/drupal being forbidden. This is .htaccess in / directory: Options -Indexes Options +FollowSymLinks <IfModule mod_rewrite.c> RewriteEngine on RewriteCond %{HTTP_HOST} ^www\.(.+)$ [NC] RewriteRule ^ http://%1%{REQUEST_URI} [L,R=301] RewriteRule ^(.*+)$ drupal/$1 [L,QSA] </IfModule> And this is drupal .htaccess in /drupal/ directory: Options -Indexes Options +FollowSymLinks ErrorDocument 404 index.php DirectoryIndex index.php index.html index.htm # Override PHP settings that cannot be changed at runtime. See # sites/default/default.settings.php and drupal_initialize_variables() in # includes/bootstrap.inc for settings that can be changed at runtime. # PHP 5, Apache 1 and 2. <IfModule mod_php5.c> php_flag magic_quotes_gpc off php_flag magic_quotes_sybase off php_flag register_globals off php_flag session.auto_start off php_value mbstring.http_input pass php_value mbstring.http_output pass php_flag mbstring.encoding_translation off </IfModule> # Requires mod_expires to be enabled. <IfModule mod_expires.c> # Enable expirations. ExpiresActive On # Cache all files for 2 weeks after access (A). ExpiresDefault A1209600 <FilesMatch \.php$> # Do not allow PHP scripts to be cached unless they explicitly send cache # headers themselves. Otherwise all scripts would have to overwrite the # headers set by mod_expires if they want another caching behavior. This may # fail if an error occurs early in the bootstrap process, and it may cause # problems if a non-Drupal PHP file is installed in a subdirectory. ExpiresActive Off </FilesMatch> </IfModule> # Various rewrite rules. <IfModule mod_rewrite.c> RewriteEngine on # Block access to "hidden" directories whose names begin with a period. This # includes directories used by version control systems such as Subversion or # Git to store control files. Files whose names begin with a period, as well # as the control files used by CVS, are protected by the FilesMatch directive # above. RewriteRule "(^|/)\." - [F] # To redirect all users to access the site WITH the 'www.' prefix, # (http://example.com/... will be redirected to http://www.example.com/...) # uncomment the following: # RewriteCond %{HTTP_HOST} !^www\. [NC] # RewriteRule ^ http://www.%{HTTP_HOST}%{REQUEST_URI} [L,R=301] # # To redirect all users to access the site WITHOUT the 'www.' prefix, # (http://www.example.com/... will be redirected to http://example.com/...) # uncomment the following: RewriteCond %{HTTP_HOST} ^www\.(.+)$ [NC] RewriteRule ^ http://%1%{REQUEST_URI} [L,R=301] RewriteBase /drupal # Pass all requests not referring directly to files in the filesystem to # index.php. Clean URLs are handled in drupal_environment_initialize(). RewriteCond %{REQUEST_FILENAME} !-f RewriteCond %{REQUEST_FILENAME} !-d RewriteCond %{REQUEST_URI} !=/favicon.ico #RewriteRule ^ index.php [L] RewriteRule ^(.*)$ index.php?q=$1 [L,QSA] # Rules to correctly serve gzip compressed CSS and JS files. # Requires both mod_rewrite and mod_headers to be enabled. <IfModule mod_headers.c> # Serve gzip compressed CSS files if they exist and the client accepts gzip. RewriteCond %{HTTP:Accept-encoding} gzip RewriteCond %{REQUEST_FILENAME}\.gz -s RewriteRule ^(.*)\.css $1\.css\.gz [QSA] # Serve gzip compressed JS files if they exist and the client accepts gzip. RewriteCond %{HTTP:Accept-encoding} gzip RewriteCond %{REQUEST_FILENAME}\.gz -s RewriteRule ^(.*)\.js $1\.js\.gz [QSA] # Serve correct content types, and prevent mod_deflate double gzip. RewriteRule \.css\.gz$ - [T=text/css,E=no-gzip:1] RewriteRule \.js\.gz$ - [T=text/javascript,E=no-gzip:1] <FilesMatch "(\.js\.gz|\.css\.gz)$"> # Serve correct encoding type. Header append Content-Encoding gzip # Force proxies to cache gzipped & non-gzipped css/js files separately. Header append Vary Accept-Encoding </FilesMatch> </IfModule> </IfModule>

  Read the article

• no launcher, no dash, no unity, how to get back to my desktop?

  - by Numan Syed

  FYI, I have tried these, but none worked as of yet! Please help! I must not want to reinstall Ubuntu precise: AskUbuntu:Unity Launcher missing AskUbuntu: Unity doesn't load Youtube:Restore missing launcher AskUbuntu:Unity 3D no longer works! Is there any other way to find a solution, any help is highly appreciated! Please do ask for any further info u may need to point me to a better direction. Edit: I have still the opportunity to use ctrl+Alt+T for the terminal. And from there I used firefox & to get the browser on. Edit 2: Tried to find more; found more explained situation http://askubuntu.com/q/260578/176470. Edit 3:@Adithya: tried that no luck! Here is what my terminal gave me so far... [1447:22] (~) bash $ unity --reset WARNING: Unity currently default profile, so switching to metacity while resetting the values unity-panel-service: no process found Checking if settings need to be migrated ...no Checking if internal files need to be migrated ...no Backend : gconf Integration : true Profile : unity Adding plugins Initializing core options...done compiz (core) - Warn: failed to receive ConfigureNotify event on 0x1600004 compiz (core) - Warn: failed to receive ConfigureNotify event on 0x30000b8 compiz (core) - Warn: failed to receive ConfigureNotify event on 0x2c00fc1 Initializing composite options...done Initializing opengl options...done Initializing decor options...done Initializing vpswitch options...done Initializing snap options...done Initializing mousepoll options...done Initializing resize options...done Initializing place options...done Initializing move options...done Initializing wall options...done Initializing grid options...done Initializing session options...done Initializing gnomecompat options...done Initializing animation options...done Initializing fade options...done compiz (core) - Error: Couldn't load plugin '/usr/lib/compiz/libunitymtgrabhandles.so' : /usr/lib/compiz/libunitymtgrabhandles.so: undefined symbol: _ZN10CompOption7setNameEPKcNS_4TypeE compiz (core) - Error: Couldn't load plugin 'unitymtgrabhandles' Initializing workarounds options...done Initializing scale options...done compiz (expo) - Warn: failed to bind image to texture Initializing expo options...done Initializing ezoom options...done compiz (core) - Error: Couldn't load plugin '/usr/lib/compiz/libunityshell.so' : /usr/lib/compiz/libunityshell.so: undefined symbol: _ZN10CompOption7setNameEPKcNS_4TypeE compiz (core) - Error: Couldn't load plugin 'unityshell' compiz (core) - Warn: unhandled ConfigureNotify on 0xc000a0! compiz (core) - Warn: this should never happen. you should probably file a bug about this. compiz (core) - Warn: unhandled ConfigureNotify on 0xc000a3! compiz (core) - Warn: this should never happen. you should probably file a bug about this. compiz (core) - Warn: unhandled ConfigureNotify on 0xc000a6! compiz (core) - Warn: this should never happen. you should probably file a bug about this. Initializing addhelper options...done Initializing animationaddon options...done Initializing annotate options...done Initializing bench options...done Initializing blur options...done Initializing clone options...done Initializing colorfilter options...done Initializing commands options...done Initializing crashhandler options...done Initializing cube options...done Initializing cubeaddon options...done Initializing extrawm options...done Initializing fadedesktop options...done Initializing firepaint options...done Initializing group options...done Initializing imgjpeg options...done Initializing kdecompat options...done Initializing loginout options...done Initializing mag options...done Initializing maximumize options...done Initializing mblur options...done Initializing neg options...done Initializing notification options...done Initializing obs options...done Initializing opacify options...done Initializing put options...done Initializing reflex options...done Initializing resizeinfo options...done Initializing ring options...done Initializing rotate options...done Initializing scaleaddon options...done Initializing scalefilter options...done Initializing screenshot options...done Initializing shelf options...done Initializing shift options...done Initializing showdesktop options...done Initializing showmouse options...done Initializing splash options...done Initializing staticswitcher options...done Initializing switcher options...done Initializing td options...done Initializing thumbnail options...done Initializing trailfocus options...done Initializing unitymtgrabhandles options...done Initializing unityshell options...done Initializing wallpaper options...done Initializing water options...done Initializing widget options...done Initializing winrules options...done Initializing wobbly options...done Setting Update "main_menu_key" Setting Update "run_key" Anything suspicious herein?

  Read the article

• User interfirance, themes, Broken, Unreadable parts

  - by Adames

  Arther going on a customizing spree my the desktop themes on unity got messed up I had installed Ubuntu tweak and unsettings so I removed them but the default themes and custom ones are still messed up I ran unity --reset and this is what I get: WARNING: Unity currently default profile, so switching to metacity while resetting the values unity-panel-service: no process found Checking if settings need to be migrated ...no Checking if internal files need to be migrated ...no Backend : gconf Integration : true Profile : unity Adding plugins Initializing core options...done compiz (core) - Warn: failed to receive ConfigureNotify event on 0x1200004 compiz (core) - Warn: failed to receive ConfigureNotify event on 0x38000af compiz (core) - Warn: failed to receive ConfigureNotify event on 0x32000ad Initializing composite options...done Initializing opengl options...done Initializing decor options...done Initializing vpswitch options...done Initializing snap options...done Initializing mousepoll options...done Initializing resize options...done Initializing place options...done Initializing move options...done Initializing wall options...done Initializing grid options...done Initializing session options...done Initializing gnomecompat options...done Initializing animation options...done Initializing fade options...done Initializing unitymtgrabhandles options...done Initializing workarounds options...done Initializing scale options...done compiz (expo) - Warn: failed to bind image to texture Initializing expo options...done Initializing ezoom options...done (compiz:4749): GConf-CRITICAL **: gconf_client_add_dir: assertion `gconf_valid_key (dirname, NULL)' failed Initializing unityshell options...done compiz (core) - Warn: unhandled ConfigureNotify on 0xc0009e! compiz (core) - Warn: this should never happen. you should probably file a bug about this. compiz (core) - Warn: unhandled ConfigureNotify on 0xc000a1! compiz (core) - Warn: this should never happen. you should probably file a bug about this. compiz (core) - Warn: unhandled ConfigureNotify on 0xc000a1! compiz (core) - Warn: this should never happen. you should probably file a bug about this. compiz (core) - Warn: unhandled ConfigureNotify on 0xc000a4! compiz (core) - Warn: this should never happen. you should probably file a bug about this. WARN 2012-07-02 19:51:42 unity.libindicator <unknown>:0 Desktop file '/usr/share/applications/google-chrome.desktop' is using a deprecated format for its actions that will be dropped soon. WARN 2012-07-02 19:51:42 unity.libindicator <unknown>:0 Desktop file '/usr/share/applications/firefox.desktop' is using a deprecated format for its actions that will be dropped soon. WARN 2012-07-02 19:51:42 unity.libindicator <unknown>:0 Desktop file '/usr/share/applications/libreoffice-writer.desktop' is using a deprecated format for its actions that will be dropped soon. WARN 2012-07-02 19:51:42 unity.libindicator <unknown>:0 Desktop file '/usr/share/applications/libreoffice-calc.desktop' is using a deprecated format for its actions that will be dropped soon. WARN 2012-07-02 19:51:42 unity.libindicator <unknown>:0 Desktop file '/usr/share/applications/libreoffice-impress.desktop' is using a deprecated format for its actions that will be dropped soon. Initializing addhelper options...done Initializing animationaddon options...done Initializing annotate options...done Initializing bench options...done Initializing blur options...done Initializing clone options...done Initializing colorfilter options...done Initializing commands options...done Initializing crashhandler options...done Initializing cube options...done Initializing cubeaddon options...done Initializing extrawm options...done Initializing fadedesktop options...done Initializing firepaint options...done Initializing group options...done Initializing imgjpeg options...done Initializing kdecompat options...done Initializing loginout options...done Initializing mag options...done Initializing maximumize options...done Initializing mblur options...done Initializing neg options...done Initializing notification options...done Initializing obs options...done Initializing opacify options...done Initializing put options...done Initializing reflex options...done Initializing resizeinfo options...done Initializing ring options...done Initializing rotate options...done Initializing scaleaddon options...done Initializing scalefilter options...done Initializing screenshot options...done Initializing shelf options...done Initializing shift options...done Initializing showdesktop options...done Initializing showmouse options...done Initializing splash options...done Initializing staticswitcher options...done Initializing switcher options...done Initializing td options...done Initializing thumbnail options...done Initializing trailfocus options...done Initializing wallpaper options...done Initializing water options...done Initializing widget options...done Initializing winrules options...done Initializing wobbly options...done ERROR 2012-07-02 19:51:43 unity.glib-gobject <unknown>:0 g_object_unref: assertion `G_IS_OBJECT (object)' failed Setting Update "main_menu_key" Setting Update "run_key" Setting Update "autoraise" Setting Update "autoraise_delay" Any Ideas? this is very inconvenient some of the text like in additional drivers are unreadable because they come out White

  Read the article

• NHibernate 3.0 and FluentNHibernate, how to get up and running&hellip;.

  - by DesigningCode

  First up. Its actually really easy. I’m not very religious about my DB tech, I don’t really care, I just want something that works.  So I’m happy to consider all options if they provide an advantage, and recently I was considering jumping from NHibernate to EF 4.0.  However before ditching NHibernate and jumping to EF 4.0 I thought I should try the head version of NHibernates trunk and the Head version of FluentNHibernate. I currently have a “Repository / Unit of Work” Framework built up around these two techs.  All up it makes my life pretty simple for dealing with databases.   The problem is the current release of NHibernate + the Linq provider wasn’t too hot for our purposes.  Especially trying to plug it into older VB.NET code.   The Linq provider spat the dummy with VB.NET lambdas.  Mainly because in C# Query().Where(l => l.Name.Contains("x") || l.Name.Contains("y")).ToList(); is not the same as the VB.NET Query().Where(Function(l) l.Name.Contains("x") Or l.Name.Contains("y")).ToList VB.NET seems to spit out … well…. something different :-) so anyways… Compiling your own version of NHibernate and FluentNHibernate.  It’s actually pretty easy! First you’ll need to install tortisesvn NAnt and Git if you don’t already have them.  NHibernate first step, get the subversion trunk https://nhibernate.svn.sourceforge.net/svnroot/nhibernate/trunk/ into a directory somewhere.  eg \thirdparty\nhibernate Then use NAnt to build it.   (if you open the .sln it will show errors in that  AssemblyInfo.cs doesn’t exist ) to build it, there is a .txt document with sample command line build instructions,  I simply used :- NAnt -D:project.config=release clean build >output-release-build.log *wait* *wait* *wait* and ta da, you will have a bin directory with all the release dlls. FluentNHibernate This was pretty simple. there’s instructions here :- http://wiki.fluentnhibernate.org/Getting_started#Installation basically, with git, create a directory, and you issue the command git clone git://github.com/jagregory/fluent-nhibernate.git and wait, and soon enough you have the source. Now, from the bin directory that NHibernate spit out, take everything and dump it into the subdirectory “fluent-nhibernate\tools\NHibernate” Now, to build, you can use rake….which a ruby build system, however you can also just open the solution and build.   Which is what I did.  I had a few problems with the references which I simply re-added using the new ones.  Once built, I just took all the NHibnerate dlls, and the fluent ones and replaced my existing NHibernate / Fluent and killed off the old linq project. All I had to change is the places that used  .Linq<T>  and replace them with .Query<T>  (which was easy as I had wrapped it already to isolate my code from such changes) and hey presto, everything worked.  Even the VB.NET linq calls. I need to do some more testing as I’ve only done basic smoke tests, but its all looking pretty good, so for now, I will stick to NHibernate!

  Read the article

• [Silverlight] How to watermark a WriteableBitmap with a text

  - by Benjamin Roux

  Hello, In my current project, I needed to watermark a WriteableBitmap with a text. As I couldn’t find anything I decided to create a small extension method to do so. public static class WriteableBitmapEx { /// <summary> /// Creates a watermark on the specified image /// </summary> /// <param name="input">The image to create the watermark from</param> /// <param name="watermark">The text to watermark</param> /// <param name="color">The color - default is White</param> /// <param name="fontSize">The font size - default is 50</param> /// <param name="opacity">The opacity - default is 0.25</param> /// <param name="hasDropShadow">Specifies if a drop shadow effect must be added - default is true</param> /// <returns>The watermarked image</returns> public static WriteableBitmap Watermark(this WriteableBitmap input, string watermark, Color color = default(Color), double fontSize = 50, double opacity = 0.25, bool hasDropShadow = true) { var watermarked = GetTextBitmap(watermark, fontSize, color == default(Color) ? Colors.White : color, opacity, hasDropShadow); var width = watermarked.PixelWidth; var height = watermarked.PixelHeight; var result = input.Clone(); var position = new Rect(input.PixelWidth - width - 20 /* right margin */, input.PixelHeight - height, width, height); result.Blit(position, watermarked, new Rect(0, 0, width, height)); return result; } /// <summary> /// Creates a WriteableBitmap from a text /// </summary> /// <param name="text"></param> /// <param name="fontSize"></param> /// <param name="color"></param> /// <param name="opacity"></param> /// <param name="hasDropShadow"></param> /// <returns></returns> private static WriteableBitmap GetTextBitmap(string text, double fontSize, Color color, double opacity, bool hasDropShadow) { TextBlock txt = new TextBlock(); txt.Text = text; txt.FontSize = fontSize; txt.Foreground = new SolidColorBrush(color); txt.Opacity = opacity; if (hasDropShadow) txt.Effect = new DropShadowEffect(); WriteableBitmap bitmap = new WriteableBitmap((int)txt.ActualWidth, (int)txt.ActualHeight); bitmap.Render(txt, null); bitmap.Invalidate(); return bitmap; } } For this code to run, you need the WritableBitmapEx library. As you can see, it’s quite simple. You just need to call the Watermark method and pass it the text you want to add in your image. You can also pass optional parameters like the color, the opacity, the fontsize or if you want a drop shadow effect. I could have specify other parameters like the position or the the font family but you can change the code if you need to. Here’s what it can give Hope this helps.

  Read the article

• Any reliable polygon normal calculation code?

  - by Jenko

  Do you have any reliable face normal calculation code? I'm using this but it fails when faces are 90 degrees upright or similar. // the normal point var x:Number = 0; var y:Number = 0; var z:Number = 0; // if is a triangle with 3 points if (points.length == 3) { // read vertices of triangle var Ax:Number, Bx:Number, Cx:Number; var Ay:Number, By:Number, Cy:Number; var Az:Number, Bz:Number, Cz:Number; Ax = points[0].x; Bx = points[1].x; Cx = points[2].x; Ay = points[0].y; By = points[1].y; Cy = points[2].y; Az = points[0].z; Bz = points[1].z; Cz = points[2].z; // calculate normal of a triangle x = (By - Ay) * (Cz - Az) - (Bz - Az) * (Cy - Ay); y = (Bz - Az) * (Cx - Ax) - (Bx - Ax) * (Cz - Az); z = (Bx - Ax) * (Cy - Ay) - (By - Ay) * (Cx - Ax); // if is a polygon with 4+ points }else if (points.length > 3){ // calculate normal of a polygon using all points var n:int = points.length; x = 0; y = 0; z = 0 // ensure all points above 0 var minx:Number = 0, miny:Number = 0, minz:Number = 0; for (var p:int = 0, pl:int = points.length; p < pl; p++) { var po:_Point3D = points[p] = points[p].clone(); if (po.x < minx) { minx = po.x; } if (po.y < miny) { miny = po.y; } if (po.z < minz) { minz = po.z; } } if (minx > 0 || miny > 0 || minz > 0){ for (p = 0; p < pl; p++) { po = points[p]; po.x -= minx; po.y -= miny; po.z -= minz; } } var cur:int = 1, prev:int = 0, next:int = 2; for (var i:int = 1; i <= n; i++) { // using Newell method x += points[cur].y * (points[next].z - points[prev].z); y += points[cur].z * (points[next].x - points[prev].x); z += points[cur].x * (points[next].y - points[prev].y); cur = (cur+1) % n; next = (next+1) % n; prev = (prev+1) % n; } } // length of the normal var length:Number = Math.sqrt(x * x + y * y + z * z); // if area is 0 if (length == 0) { return null; }else{ // turn large values into a unit vector x = x / length; y = y / length; z = z / length; }

  Read the article

• Have Your Cake and Eat it Too: Industry Best Practices + Flexibility

  - by Oracle Accelerate for Midsize Companies

  By Richard Garraputa, VP of Sales & Marketing, brij Richard joined brij in 1996 after graduating from the University of North Carolina at Greensboro with degrees in Information Systems and Accounting. He directs brij’s overall strategies of both the business development and marketing departments. Companies looking for new ERP systems spend so much time comparing features and functions of software products but too often short change the value of their own processes.  Company managers I meet often claim that they are implementing a new ERP system so they can perform better and faster.  When asked how, the answer is often “by implementing best practices”.  But the term ‘best practices’ is frequently used to mean ‘doing things the way everyone else does them’ rather than a starting point or benchmark to build upon by adding your own value. Of course, implementing standardized processes across an enterprise is an important step in improving operational efficiencies.  But not all companies are alike.  Do you ever tell your customers “We are just like our competition and have no competitive differentiation”?  Probably not.  So why should the implementation of your business processes be just like your competitor’s?  Even within the same industry, companies differentiate themselves by leveraging their unique expertise and approach to business.  These unique aspects—the competitive differentiators that companies use to thrive in a crowded marketplace—can and should be supported by the implementation of business systems like ERP. Modern ERP systems like Oracle’s JD Edwards EnterpriseOne have a broad and deep functional footprint designed to integrate a company’s core operations.  But how can a company take advantage of this footprint without blowing up their implementation budget?  Some ERP vendors claim to solve this challenge by stating that their systems come pre-configured with ‘best practices’.  Too often what they are really saying is that you will have to abandon your key operational differentiators to fit a vendor’s template for your business—or extend your implementation and postpone the realization of any benefits. Thankfully for midsize companies, there is an alternative to the undesirable options of extended implementation projects or abandoning their competitive differentiators.  Oracle Accelerate Solutions speed the time it takes to implement JD Edwards EnterpriseOne solution based on your unique business characteristics, getting your new ERP system up and running faster without forcing your business to fit a cookie-cutter solution. We’ve been a JD Edwards implementation partner since 1986 and we now leverage Oracle Business Accelerators—cloud based rapid implementation tools built and maintained by Oracle. Oracle Business Accelerators deliver the benefits of embedded industry best practices without forcing every customer in to one set of processes like many template or “clone and go” approaches do. You retain the ability to reconfigure your applications—without customization—as your business changes. Wielded by Oracle partners with industry-specific domain expertise, Oracle Accelerate Solution implementations powered by Oracle Business Accelerators help automate the application configuration to fit your business better, faster. For example, on a recent project at a manufacturing company, the project manager told me that Oracle Business Accelerators helped get them to Conference Room Pilot 20% faster than with a traditional approach. Time savings equal cost savings. And if ‘better and faster’ is your goal for your business performance, shouldn’t it be the goal for your ERP implementation as well? Established in 1986, brij has been dedicated solely to helping its customers implement Oracle’s JD Edwards solutions and to maximize the value of those customers’ IT investments. They are a Gold level member in Oracle PartnerNetwork and an Oracle Accelerate Solution provider.

  Read the article

• "ERROR:Could not find java.nio.file.Paths" when using Oracle JDK 1.7

  - by Ankit

  I want to try out some features rolled out in Oracle's new JDK 1.7. I followed the post:- Oracle JDK 1.7 but the post doesn't seem to help. I was trying to fetch out the structure for java.nio.file.Paths class file but got the following error:- buffer@ankit:~$ javap java.nio.file.Paths ERROR:Could not find java.nio.file.Paths However i can easily get the information about class structures till JAVA SE 1.6, here is an example:- buffer@ankit:~$ javap java.lang.Object Compiled from "Object.java" public class java.lang.Object{ public java.lang.Object(); public final native java.lang.Class getClass(); public native int hashCode(); public boolean equals(java.lang.Object); protected native java.lang.Object clone() throws java.lang.CloneNotSupportedException; public java.lang.String toString(); public final native void notify(); public final native void notifyAll(); public final native void wait(long) throws java.lang.InterruptedException; public final void wait(long, int) throws java.lang.InterruptedException; public final void wait() throws java.lang.InterruptedException; protected void finalize() throws java.lang.Throwable; static {}; } Running java -version gives the following result:- buffer@ankit:~$ java -version java version "1.7.0_09" Java(TM) SE Runtime Environment (build 1.7.0_09-b05) Java HotSpot(TM) 64-Bit Server VM (build 23.5-b02, mixed mode) SYSTEM INFORMATION buffer@ankit:~$ sudo update-alternatives --config java [sudo] password for buffer: There are 4 choices for the alternative java (providing /usr/bin/java). Selection Path Priority Status ------------------------------------------------------------ 0 /usr/lib/jvm/java-6-openjdk-amd64/jre/bin/java 1061 auto mode 1 /usr/lib/jvm/java-6-openjdk-amd64/jre/bin/java 1061 manual mode 2 /usr/lib/jvm/java-7-openjdk-amd64/jre/bin/java 1051 manual mode 3 /usr/lib/jvm/jdk1.7.0_09/ 1 manual mode * 4 /usr/lib/jvm/jdk1.7.0_09/bin/java 1 manual mode buffer@ankit:~$ sudo update-alternatives --config javac There are 2 choices for the alternative javac (providing /usr/bin/javac). Selection Path Priority Status ------------------------------------------------------------ 0 /usr/lib/jvm/java-6-openjdk-amd64/bin/javac 1061 auto mode 1 /usr/lib/jvm/java-6-openjdk-amd64/bin/javac 1061 manual mode * 2 /usr/lib/jvm/jdk1.7.0_09/bin/javac 1 manual mode buffer@ankit:~$ sudo update-alternatives --config javaws There are 3 choices for the alternative javaws (providing /usr/bin/javaws). Selection Path Priority Status ------------------------------------------------------------ 0 /usr/lib/jvm/java-6-openjdk-amd64/jre/bin/javaws 1061 auto mode 1 /usr/lib/jvm/java-6-openjdk-amd64/jre/bin/javaws 1061 manual mode 2 /usr/lib/jvm/java-7-openjdk-amd64/jre/bin/javaws 1060 manual mode * 3 /usr/lib/jvm/jdk1.7.0_09/bin/javaws 1 manual mode The directory structure of /usr/lib/jvm/ is as follows:- buffer@ankit:~$ ls -l /usr/lib/jvm/ total 24 lrwxrwxrwx 1 root root 24 Dec 2 2011 default-java -> java-1.6.0-openjdk-amd64 drwxr-xr-x 4 root root 4096 Nov 8 16:24 java-1.5.0-gcj-4.6 lrwxrwxrwx 1 root root 24 Dec 2 2011 java-1.6.0-openjdk -> java-1.6.0-openjdk-amd64 lrwxrwxrwx 1 root root 20 Oct 25 00:01 java-1.6.0-openjdk-amd64 -> java-6-openjdk-amd64 lrwxrwxrwx 1 root root 20 Oct 25 06:59 java-1.7.0-openjdk-amd64 -> java-7-openjdk-amd64 lrwxrwxrwx 1 root root 24 Dec 2 2011 java-6-openjdk -> java-1.6.0-openjdk-amd64 drwxr-xr-x 7 root root 4096 Nov 8 16:24 java-6-openjdk-amd64 drwxr-xr-x 3 root root 4096 Nov 8 16:24 java-6-openjdk-common drwxr-xr-x 5 root root 4096 Nov 8 05:48 java-7-openjdk-amd64 drwxr-xr-x 3 root root 4096 Nov 8 05:48 java-7-openjdk-common drwxr-xr-x 8 buffer buffer 4096 Sep 25 09:08 jdk1.7.0_09 Any help would be highly appreciated.

  Read the article

• Randomly placing items script not working - sometimes items spawn in walls, sometimes items spawn in weird locations

  - by Timothy Williams

  I'm trying to figure out a way to randomly spawn items throughout my level, however I need to make sure they won't spawn inside another object (walls, etc.) Here's the code I'm currently using, it's based on the Physics.CheckSphere(); function. This runs OnLevelWasLoaded(); It spawns the items perfectly fine, but sometimes items spawn partway in walls. And sometimes items will spawn outside of the SpawnBox range (no clue why it does that.) //This is what randomly generates all the items. void SpawnItems () { if (Application.loadedLevelName == "Menu" || Application.loadedLevelName == "End Demo") return; //The bottom corner of the box we want to spawn items in. Vector3 spawnBoxBot = Vector3.zero; //Top corner. Vector3 spawnBoxTop = Vector3.zero; //If we're in the dungeon, set the box to the dungeon box and tell the items we want to spawn. if (Application.loadedLevelName == "dungeonScene") { spawnBoxBot = new Vector3 (8.857f, 0, 9.06f); spawnBoxTop = new Vector3 (-27.98f, 2.4f, -15); itemSpawn = dungeonSpawn; } //Spawn all the items. for (i = 0; i != itemSpawn.Length; i ++) { spawnedItem = null; //Zeroes out our random location Vector3 randomLocation = Vector3.zero; //Gets the meshfilter of the item we'll be spawning MeshFilter mf = itemSpawn[i].GetComponent<MeshFilter>(); //Gets it's bounds (see how big it is) Bounds bounds = mf.sharedMesh.bounds; //Get it's radius float maxRadius = new Vector3 (bounds.extents.x + 10f, bounds.extents.y + 10f, bounds.extents.z + 10f).magnitude * 5f; //Set which layer is the no walls layer var NoWallsLayer = 1 << LayerMask.NameToLayer("NoWallsLayer"); //Use that layer as your layermask. LayerMask layerMask = ~(1 << NoWallsLayer); //If we're in the dungeon, certain items need to spawn on certain halves. if (Application.loadedLevelName == "dungeonScene") { if (itemSpawn[i].name == "key2" || itemSpawn[i].name == "teddyBearLW" || itemSpawn[i].name == "teddyBearLW_Admiration" || itemSpawn[i].name == "radio") randomLocation = new Vector3(Random.Range(spawnBoxBot.x, -26.96f), Random.Range(spawnBoxBot.y, spawnBoxTop.y), Random.Range(spawnBoxBot.z, -2.141f)); else randomLocation = new Vector3(Random.Range(spawnBoxBot.x, spawnBoxTop.x), Random.Range(spawnBoxBot.y, spawnBoxTop.y), Random.Range(-2.374f, spawnBoxTop.z)); } //Otherwise just spawn them in the box. else randomLocation = new Vector3(Random.Range(spawnBoxBot.x, spawnBoxTop.x), Random.Range(spawnBoxBot.y, spawnBoxTop.y), Random.Range(spawnBoxBot.z, spawnBoxTop.z)); //This is what actually spawns the item. It checks to see if the spot where we want to instantiate it is clear, and if so it instatiates it. Otherwise we have to repeat the whole process again. if (Physics.CheckSphere(randomLocation, maxRadius, layerMask)) spawnedItem = Instantiate(itemSpawn[i], randomLocation, Random.rotation); else i --; //If we spawned something, set it's name to what it's supposed to be. Removes the (clone) addon. if (spawnedItem != null) spawnedItem.name = itemSpawn[i].name; } } What I'm asking for is if you know what's going wrong with this code that it would spawn stuff in walls. Or, if you could provide me with links/code/ideas of a better way to check if an item will spawn in a wall (some other function than Physics.CheckSphere). I've been working on this for a long time, and nothing I try seems to work. Any help is appreciated.

  Read the article

• Cloud Backup: Getting the Users' Backs Up

  - by Tony Davis

  On Wednesday last week, Microsoft announced that as of July 1, all data transfers into its Microsoft Azure cloud will be free (though you have to pay for transferring data out). On Thursday last week, SQL Azure in Western Europe went down. It was a relatively short outage, but since SQL Azure currently provides no easy way to take a standard backup of a database and store it locally, many people had no recourse but to wait patiently for their cloud-based app to resume. It seems that Microsoft are very keen encourage developers to move their data onto their cloud, but are developers ready to do it, given that such basic backup capabilities are lacking? Recently on Simple-Talk, Mike Mooney described a perfect use case for the Microsoft Cloud. They had a simple web-based application with a SQL Server backend; they could move the application to Windows Azure, and the data into SQL Azure and in the process free themselves from much of the hassle surrounding management and scaling of the hardware, network and so on. It was a great fit and yet it nearly didn't happen; lack of support for the BACKUP command almost proved a show-stopper. Of course, backups of Azure databases are always and have always been taken automatically, for disaster recovery purposes, but these are strictly on-cloud copies and as of now it is not possible to use them to them to restore a database to a particular point in time. It seems that none of those clever Microsoft people managed to predict the need to perform basic backups of Azure databases so that copies could be stored locally, outside the Azure universe. At the very least, as Mike points out, performing a local backup before a new deployment is more or less mandatory. Microsoft did at least note the sound of gnashing teeth and, as a stop-gap measure, offered SQL Azure Database Copy which basically allows you to create an online clone of your database, but this doesn't allow for storing local archives of the data. To that end MS has provided SQL Azure Import/Export, to package up and export a database and its data, using BACPACs. These BACPACs do not guarantee transactional consistency; for example, if a child table is modified after the parent is copied, then the copied database will be in inconsistent state (meaning, to add to the fun, BACPACs need to be created from a database copy). In any event, widespread problems with BACPAC's evil cousin, the DACPAC have been well-documented, and it seems likely that many will also give BACPAC the bum's rush. Finally, in a TechEd 2011 presentation tagged "SQL Azure Advanced Administration", it was announced that "backup and restore" were coming in the next SQL Azure CTP. And yet this still doesn't mean that we'll get simple backups as DBAs know and love them. What it does mean, at least, is the ability to restore any given database to a point in time within a 2-week window. For the time being, if you want a local copy of your data and don't want to brave the BACPAC, one is left with SSIS or BCP, creative use of schema and data comparison tools, or use of SQL Azure Backup (currently in beta) in order to perform this simple but vital task. Cheers, Tony.

  Read the article

• Tetris Movement - Implementation

  - by James Brauman

  Hi gamedev, I'm developing a Tetris clone and working on the input at the moment. When I was prototyping, movement was triggered by releasing a directional key. However, in most Tetris games I've played the movement is a bit more complex. When a directional key is pressed, the shape moves one space in that direction. After a short interval, if the key is still held down, the shape starts moving in the direction continuously until the key is released. In the case of the down key being pressed, there is no pause between the initial movement and the subsequent continuous movement. I've come up with a solution, and it works well, but it's totally over-engineered. Hey, at least I can recognize when things are getting silly, right? :) public class TetrisMover { List registeredKeys; Dictionary continuousPressedTime; Dictionary totalPressedTime; Dictionary initialIntervals; Dictionary continousIntervals; Dictionary keyActions; Dictionary initialActionDone; KeyboardState currentKeyboardState; public TetrisMover() { *snip* } public void Update(GameTime gameTime) { currentKeyboardState = Keyboard.GetState(); foreach (Keys currentKey in registeredKeys) { if (currentKeyboardState.IsKeyUp(currentKey)) { continuousPressedTime[currentKey] = TimeSpan.Zero; totalPressedTime[currentKey] = TimeSpan.Zero; initialActionDone[currentKey] = false; } else { if (initialActionDone[currentKey] == false) { keyActions[currentKey](); initialActionDone[currentKey] = true; } totalPressedTime[currentKey] += gameTime.ElapsedGameTime; if (totalPressedTime[currentKey] = initialIntervals[currentKey]) { continuousPressedTime[currentKey] += gameTime.ElapsedGameTime; if (continuousPressedTime[currentKey] = continousIntervals[currentKey]) { keyActions[currentKey](); continuousPressedTime[currentKey] = TimeSpan.Zero; } } } } } public void RegisterKey(Keys key, TimeSpan initialInterval, TimeSpan continuousInterval, Action keyAction) { if (registeredKeys.Contains(key)) throw new InvalidOperationException( string.Format("The key %s is already registered.", key)); registeredKeys.Add(key); continuousPressedTime.Add(key, TimeSpan.Zero); totalPressedTime.Add(key, TimeSpan.Zero); initialIntervals.Add(key, initialInterval); continousIntervals.Add(key, continuousInterval); keyActions.Add(key, keyAction); initialActionDone.Add(key, false); } public void UnregisterKey(Keys key) { *snip* } } I'm updating it every frame, and this is how I'm registering keys for movement: tetrisMover.RegisterKey( Keys.Left, keyHoldStartSpecialInterval, keyHoldMovementInterval, () = { Move(Direction.Left); }); tetrisMover.RegisterKey( Keys.Right, keyHoldStartSpecialInterval, keyHoldMovementInterval, () = { Move(Direction.Right); }); tetrisMover.RegisterKey( Keys.Down, TimeSpan.Zero, keyHoldMovementInterval, () = { PerformGravity(); }); Issues that this doesn't address: If both left and right are held down, the shape moves back and forth really quick. If a directional key is held down and the turn finishes and the shape is replaced by a new one, the new one will move quickly in that direction instead of the little pause it is supposed to have. I could fix the issues, but I think it will make the solution even worse. How would you implement this?

  Read the article

• How to get faster graphics in KVM? VNC is painfully slow with Haiku OS guest, Spice won't install and SDL doesn't work

  - by Don Quixote

  I've been coming up to speed on the Haiku operating system, an Open Source clone of BeOS 5 Pro. I'm using an Apple MacBook Pro as my development machine. Apple's BootCamp BIOS does not support more than four partitions on the internal hard drive. While I can set up extended and logical partitions, doing so will prevent any of the installed operating systems from booting. To run Haiku directly on the iron, I boot it off a USB stick. Using external storage is also helpful because I am perpetually out of filesystem space. While VirtualBox is documented to allow access to physical drives, I could not actually get it to work. Also VirtualBox can only use one of the host CPU's cores. While VB guests can be configured for more than one CPU, they are only emulated. A full build of the Haiku OS takes 4.5 under VB. I had the hope of reducing build times by using KVM instead, but it's not working nearly as well as VirtualBox did. The Linux Kernel Virtual Machine is broken in all manner of fundamental ways as seen from Haiku. But I'm a coder; maybe I could contribute to fixing some of those problems. The first problem I've got is that Haiku's video in virt-manager is quite painfully slow. When I drag Haiku windows around the desktop, they lag quite far behind where my mouse is. It's quite difficult to move a window to a precise position on the screen. Just imagine that the mouse was connected to the window title bar with a really stretchy spring. Also Haiku's mouse lags quite far behind where I have moved it. I found lots of Personal Package Archives that enable Spice from QEMU / KVM at the Ubuntu Personal Package Arhives. I tried a few of the PPAs but none of them worked; with one of them, the command "add-apt-repository" crashed with a traceback. There is a Wiki page about Spice, but it says that it only works on 64-bit. My Early 2006 MacBook Pro is 32-bit. Its Apple Model Identifier is MacBookPro1,1; these use Core Duos NOT Core 2 Duos. I don't mind building a source deb for 32-bit if I can expect it to work. Is there some reason that Spice should be 64-bit only? Does it need features of the x86_64 Instruction Set Architecture that x86 does not have? When I try using SDL from virt-manager, the configuration for Local SDL Window says "Xauth: /home/mike/.Xauthority". When I try to start my guest, virt-manager emits an error. When I Googled the error message, the usual solution was to make ~/.Xauthority readible. However, .Xauthorty does not exist in my home directory. Instead I have a $XAUTHORITY environment variable. There is no way to configure SDL in virt-manager to use $XAUTHORITY instead of ~/.Xauthority. Neither does it work to copy the value of $XAUTHORITY into the file. I am ready to scream, because I've been five fscking days trying to make KVM work for Haiku development. There is a whole lot more that is broken than the slow video. All I really want to do for now is speed up my full builds of Haiku by using "jam -j2" to use both cores in my CPU. I may try Xen next, but the last time I monkeyed with Xen it was far, far more broken than I am finding KVM to be. Just for now, I would be satisfied if there were some way to use my USB stick as a drive in VirtualBox. VB does allow me to configure /dev/sdb as a drive, but it always causes a fatal error when I try to launch the guest. Thank You For Any Advice You Can Give Me. -

  Read the article

< Previous Page | 59 60 61 62 63 64 65 66 67 68 69 70  | Next Page >