Search Results

Search found 3988 results on 160 pages for 'collision resolution'.

Page 64/160 | < Previous Page | 60 61 62 63 64 65 66 67 68 69 70 71  | Next Page >

  • How to access this server?

    - by George Edison
    I have a server that I cannot access. At first I thought it was just some temporary failure with the server, but checking from other IP addresses reveals that it is working just fine. It's only my IP address that's failing. So here is what I've tried: nslookup - resolves correctly ping - 100% packet loss using the IP address or domain traceroute - first few hops work, but from about 6 and on, I just get stars Edit: I am using OpenDNS for DNS resolution, and as mentioned above, the problem is not DNS resolution anyway.

    Read the article

  • Intel 82865G Graphics Controller - making it work in Windows 7

    - by abrams
    RE: Putting this out there in case someone else runs into this issue. The intel chipset is on-board. I discovered the reason for the crappy resolution in windows 7 was that the memory to share with the video card was set to 1MB in the BIOS. I changed this to 8MB (the maximum) and then the PC rebooted I was able to select a higher resolution. link|flag answered Aug 18 '09 at 5:53 Nick Kavadias Nick, Does this give Aero functionalty ?

    Read the article

  • netbook intel GMA 3150 external monitor 1920x1080 flicker problem

    - by seyenne
    Dear all, i recently purchased a acer netbook (apsire one d260). It runs flawlessly. Yesterday I bought a samsung 23" TFT with a native resolution of 1920x1080. According to the information found in the internet and my local computer dealer, the intel chipset can handle the native resolution of the monitor. However, this is only partly the case. I use the VGA cabel to connect, the monitor instantly switches to the native resolution and now the problem: Occasionaly, especially the first 2 hours after booting up, I have a flickering all over the screen, sometimes the entire screen is shaking and spinning around like crazy. I figured out, that lowering the resolution avoids the flicker but this helps only for some time. I can rule out that it's the monitor's problem since I found no issues with another notebook. Right now, I have no problems with the netbook, for about 30 minutes I didn't experience any issues... But I don't know for how long, it occurs without warning :-) I'm worried that if I would bring the netbook back to the dealer and explain my problem, after testing it on an external screen in the local shop, everything works just fine... And I won't get helped with the problem because I can't prove it. (I'm currently in Thailand and over here, customer service is nothing like back home in Germany) What can I do? Is this a driver related issue? (I installed the latest GPU driver) Is it because of the VGA cable? (But why does it work sometimes without any problems and with no issues on the other notebook) I monitored the GPU/CPU temperature, nothing changes really over time..Can it simply be a faulty GPU and is a replacement justifiable? I'm really stressed now because for the time I'm writing, the flickering didn't occur...but for sure, soon or later it will happen again.. I Forgot to mention, the problem also happens if the netbook runs on battery, unplugged. So the only hardware that is plugged is the TFT screen. ...........and here it comes again, flickering has just begun. NEED HELP! Thank you all for reading through this and giving any suggestions if possible. Cheers

    Read the article

  • Fastest Algorithm to scale down 32Bit RGB IMAGE.

    - by Sunny
    which algorithm to use to scale down 32Bit RGB IMAGE to custom resolution? Algorithm should average pixels. for example If I have 100x100 image and I want new Image of size 20x50. Avg of first five pixels of first source row will give first pixel of dest, And avg of first two pixels of first source column will give first dest column pixel. Currently what I do is first scale down in X resolution, and after that I scale down in Y resolution. I need one temp buffer in this method. Is there any optimized method that you know?

    Read the article

  • Flash files are playing laggy /Jerky in screensaver

    - by yogesh-chhabra
    I have developed a screen saver for MAC OS X. Screen saver plays flash files. Whene I run screen saver on display resolution higher than 1300 X 1000 then flash files play very jerky / laggy. When I run it in low resolution then files play fine.Even flash files are playing fine in desktop application. This problem is more on 10.6 Snow Leopard. I am unable to find out the reason whether it is OS screensaver engine problem or flash files problem. I know rendering increases on high resolution but there should be solution for this problem

    Read the article

  • Remote Control software for Mac

    - by MarqueIV
    One of the things I like about Microsoft's RDC Client is that the resolution of the experience is set by the client and not, say, a physical monitor connected to the host, as is the case with VNC; the latter being the protocol used by Mac. This means that even though I'm connecting to a notebook with a 1280x800 physical resolution, via RDC I can run it at 2560x1600 on my 30" monitor. However, that only seems to work for RDC. Does anyone know of something I can run on the Mac that will allow me to remotely control it at a different resolution than what is physically set? TIA, Mark

    Read the article

  • OpenLayers: Raise event when map is zoomed or moved by user

    - by David Pfeffer
    I'm using OpenLayers to display OpenStreetMap maps. (Though, I'd assume this should be general enough to work for any map product...) I'm displaying some very sophisticated vector overlays, and the amount and resolution of the features I'm returning from the server via GeoJSON to overlay has proven too much for many computers. What I'd like to do now instead is to only send data befitting the resolution of the current zoom, and fitting the current view port. This should be relatively easy to do using the GetResolution and CalculateBounds methods on the Map object. However, I don't know when to call these methods because I can't find a way to register a function to be called when the user pans the map (changing the view port) or zooms the map (changing the resolution and view port). How can I get a callback when the user pans or zooms the map?

    Read the article

  • how good is java's UUID.randomUUID?

    - by Alvin
    I know randomized UUID have very very very low probability for collision in theory, but I am wondering, in practice, how good is java 5's randonUUID in terms of not having collision? Does anybody have any experience to share?

    Read the article

  • XNA - 2D Tile Lighting

    - by Cyral
    Im adding lighting to my 2D Tile based game. I found the link http://blog.josack.com/2011/07/xna-2d-dynamic-lighting.html useful, but the way its done it dosent support collision. What Id like is some help or links as I want one that can have -always lit up light points -collision (If the light ray hits a block, then dim the next block by whatever amount until its dark) Im a noob at this stuff, but ive been searching around for quite a while but no luck (I did find Catalin's tutorial, but it seemed abit advanced for me)

    Read the article

  • Cannot manage to have the main form to show scrollbars if bigger

    - by Philippe Watel
    Hi everyone I have developped an app on 22inch monitor at its max resolution when I run this on a laptop with a different ratio and a smaller resolution well the form is too big - to be expected but no scroll bar appear automaticaly to see the whole thing if needed I have tempered with all options but could not figure it out I have tried autoscroll of course but nothing I am sure it is not so difficult but I am stuck So if anyone could indicate me what properties to change I'll be most greatful or even better some easy strategy or components (even paying) to achieve a better screen resolution independance but the scrollbar would be great to start with Thanks & Regards Philippe Watel

    Read the article

  • Google Visualization Annotated Time Line, removing data points.

    - by Vitaly Babiy
    I am trying to build a graph that will change resolution depending on how far you are zoomed in. Here is what it looks like when you are complete zoomed out. So this looks good so when I zoom in I get a higher resolution data and my graph looks like this: The problem is when I zoom out the higher resolution data does not get cleared out of the graph: The tables below the graphs are table display what is in the DataTable. This is what drawing code looks like. var g_graph = new google.visualization.AnnotatedTimeLine(document.getElementById('graph_div_json')); var table = new google.visualization.Table(document.getElementById('table_div_json')); function handleQueryResponse(response){ log("Drawing graph") var data = response.getDataTable() g_graph.draw(data, {allowRedraw:true, thickness:2, fill:50, scaleType:'maximized'}) table.draw(data, {allowRedraw:true}) } I am try to find a way for it to only displaying the data that is in the DataTable. I have tried removing the allowRedraw flag but then it breaks the zooming operation. Any help would be greatly appreciated. Thanks

    Read the article

  • Getting true video Height/Width from ASF videos

    - by David
    I am trying to convert an ASF video with FFMPEG using an interface called mediahandler. The issue is, the metadata on the ASF video appears to be corrupt. It states that the video is 640x240, and 4:3 aspect ratio. The aspect ratio is correct, but obviously the resolution is not. This causes the converter to incorrectly scale the video, because it uses the resolution to determine the original aspect ratio. I am able to get the aspect ratio metadata, but I'm not sure this solves the issue, because I would think that if the resolution could be incorrect, then so could the aspect ratio metadata. So, is there any way to get the actual height/width? It appears that players like VLC have no issue with this. How do I do such a thing w/ FFMPEG?

    Read the article

  • C# 4.0: Dynamic Programming

    - by Paulo Morgado
    The major feature of C# 4.0 is dynamic programming. Not just dynamic typing, but dynamic in broader sense, which means talking to anything that is not statically typed to be a .NET object. Dynamic Language Runtime The Dynamic Language Runtime (DLR) is piece of technology that unifies dynamic programming on the .NET platform, the same way the Common Language Runtime (CLR) has been a common platform for statically typed languages. The CLR always had dynamic capabilities. You could always use reflection, but its main goal was never to be a dynamic programming environment and there were some features missing. The DLR is built on top of the CLR and adds those missing features to the .NET platform. The Dynamic Language Runtime is the core infrastructure that consists of: Expression Trees The same expression trees used in LINQ, now improved to support statements. Dynamic Dispatch Dispatches invocations to the appropriate binder. Call Site Caching For improved efficiency. Dynamic languages and languages with dynamic capabilities are built on top of the DLR. IronPython and IronRuby were already built on top of the DLR, and now, the support for using the DLR is being added to C# and Visual Basic. Other languages built on top of the CLR are expected to also use the DLR in the future. Underneath the DLR there are binders that talk to a variety of different technologies: .NET Binder Allows to talk to .NET objects. JavaScript Binder Allows to talk to JavaScript in SilverLight. IronPython Binder Allows to talk to IronPython. IronRuby Binder Allows to talk to IronRuby. COM Binder Allows to talk to COM. Whit all these binders it is possible to have a single programming experience to talk to all these environments that are not statically typed .NET objects. The dynamic Static Type Let’s take this traditional statically typed code: Calculator calculator = GetCalculator(); int sum = calculator.Sum(10, 20); Because the variable that receives the return value of the GetCalulator method is statically typed to be of type Calculator and, because the Calculator type has an Add method that receives two integers and returns an integer, it is possible to call that Sum method and assign its return value to a variable statically typed as integer. Now lets suppose the calculator was not a statically typed .NET class, but, instead, a COM object or some .NET code we don’t know he type of. All of the sudden it gets very painful to call the Add method: object calculator = GetCalculator(); Type calculatorType = calculator.GetType(); object res = calculatorType.InvokeMember("Add", BindingFlags.InvokeMethod, null, calculator, new object[] { 10, 20 }); int sum = Convert.ToInt32(res); And what if the calculator was a JavaScript object? ScriptObject calculator = GetCalculator(); object res = calculator.Invoke("Add", 10, 20); int sum = Convert.ToInt32(res); For each dynamic domain we have a different programming experience and that makes it very hard to unify the code. With C# 4.0 it becomes possible to write code this way: dynamic calculator = GetCalculator(); int sum = calculator.Add(10, 20); You simply declare a variable who’s static type is dynamic. dynamic is a pseudo-keyword (like var) that indicates to the compiler that operations on the calculator object will be done dynamically. The way you should look at dynamic is that it’s just like object (System.Object) with dynamic semantics associated. Anything can be assigned to a dynamic. dynamic x = 1; dynamic y = "Hello"; dynamic z = new List<int> { 1, 2, 3 }; At run-time, all object will have a type. In the above example x is of type System.Int32. When one or more operands in an operation are typed dynamic, member selection is deferred to run-time instead of compile-time. Then the run-time type is substituted in all variables and normal overload resolution is done, just like it would happen at compile-time. The result of any dynamic operation is always dynamic and, when a dynamic object is assigned to something else, a dynamic conversion will occur. Code Resolution Method double x = 1.75; double y = Math.Abs(x); compile-time double Abs(double x) dynamic x = 1.75; dynamic y = Math.Abs(x); run-time double Abs(double x) dynamic x = 2; dynamic y = Math.Abs(x); run-time int Abs(int x) The above code will always be strongly typed. The difference is that, in the first case the method resolution is done at compile-time, and the others it’s done ate run-time. IDynamicMetaObjectObject The DLR is pre-wired to know .NET objects, COM objects and so forth but any dynamic language can implement their own objects or you can implement your own objects in C# through the implementation of the IDynamicMetaObjectProvider interface. When an object implements IDynamicMetaObjectProvider, it can participate in the resolution of how method calls and property access is done. The .NET Framework already provides two implementations of IDynamicMetaObjectProvider: DynamicObject : IDynamicMetaObjectProvider The DynamicObject class enables you to define which operations can be performed on dynamic objects and how to perform those operations. For example, you can define what happens when you try to get or set an object property, call a method, or perform standard mathematical operations such as addition and multiplication. ExpandoObject : IDynamicMetaObjectProvider The ExpandoObject class enables you to add and delete members of its instances at run time and also to set and get values of these members. This class supports dynamic binding, which enables you to use standard syntax like sampleObject.sampleMember, instead of more complex syntax like sampleObject.GetAttribute("sampleMember").

    Read the article

  • Graphics cards so I can have 4 monitors

    - by oshirowanen
    I currently have a single old graphics card to which I have connected 2 monitors giving me a big desktop of 2560x1024. If I get 2 of the following graphics card: http://www.ebuyer.com/238428-gigabyte-gts-450-1gb-gddr5-dual-dvi-mini-hdmi-out-pci-e-graphics-gv-n450-1gi Will I be able to connect to monitors per graphics card, giving me a total resolution of 5120x1024? I guess what I'm asking is, will I simply be able to stick both graphics cards in, plug the monitors in and will it all just work out of the box? I currently have 4 dvi monitors which have a native resolution of 1280x1024 each.

    Read the article

  • The Evolution of Link’s Swords [Wallpaper]

    - by Jason Fitzpatrick
    If you’re a fan of all things Legend of Zelda, this high-resolution wallpaper showcases all the swords from every Legend of Zelda game. In addition to the wallpaper that gathers all the swords together in one place, you can also check out the description on the wallpaper’s Deviant Art page to grab high-resolution images of each individual sword. Hit up the link below to grab both the wallpaper and the individual renderings. The Evolution of Link’s Swords [Deviant Art] 7 Ways To Free Up Hard Disk Space On Windows HTG Explains: How System Restore Works in Windows HTG Explains: How Antivirus Software Works

    Read the article

  • .NET development on a “Retina” MacBook Pro

    - by Jeff
    The rumor that Apple would release a super high resolution version of its 15” laptop has been around for quite awhile, and one I watched closely. After more than three years with a 17” MacBook Pro, and all of the screen real estate it offered, I was ready to replace it with something much lighter. It was a fantastic machine, still doing 6 or 7 hours after 460 charge cycles, but I wanted lighter and faster. With the SSD I put in it, I was able to sell it for $750. The appeal of higher resolution goes way back, when I would plug into a projector and scale up. Consolas, as it turns out, is a nice looking font for code when it’s bigger. While I have mostly indifference for iOS, I have to admit that a higher dot pitch on the iPhone and iPad is pretty to look at. So I ordered the new 15” “Retina” model as soon as the Apple Store went live with it, and got it seven days later. I’ve been primarily using Parallels as my VM of choice from OS X for about five years. They recently put out an update for compatibility with the display, though I’m not entirely sure what that means. I figured there would have to be some messing around to get the VM to look right. The combination that seems to work best is this: Set the display in OS X to “more room,” which is roughly the equivalent of the 1920x1200 that my 17” did. It’s not as stunning as the text at the default 1440x900 equivalent (in OS X), but it’s still quite readable. Parallels still doesn’t entirely know what to do with the high resolution, though what it should do is somehow treat it as native. That flaw aside, I set the Windows 7 scaling to 125%, and it generally looks pretty good. It’s not really taking advantage of the display for sharpness, but hopefully that’s something that Parallels will figure out. Screen tweaking aside, I got the base model with 16 gigs of RAM, so I give the VM 8. I can boot a Windows 7 VM in 9 seconds. Nine seconds! The Windows Experience Index scores are all 7 and above, except for graphics, which are both at 6. Again, that’s in a VM. It’s hard to believe there’s something so fast in a little slim package like that. Hopefully this one gets me at least three years, like the last one.

    Read the article

  • How do I get my blacked out ttys back?

    - by con-f-use
    Original Question: After I replaced my Ubuntu 10.10 with 11.04 all I get when I Strg+Alt+F1-6 into a tty is a black screen. Also when I boot there's a while of black screen after grub2 menu is displayed. Then until just before gnome starts it stays black. I have an Nvida Geforce Quadro FX 770M on my HP EliteBook 8530w. How do I get my ttys (aka 'virtual terminals') to work again? My effords in chronological order: So grub and gfx-payload seems to be the problem, I figured. I went along with this guide for higher tty resolution. Which led to the grub2 menu displaying in my native resolution rather than 800x600. The black screen problem remains. I googlehit some bugreports on other nvidia crads having that problem. I tried uninstalling the nvidia driver. No effect. Also tried different resolutions With an older version of the kernel it works. Though not perfectly. The ttys are usable, black screen between grub2 menu and gnome start remains. Not really a solution. Tried so much, that I lost track. Reinstalled grub2 and linux-image-2.6.38-8-generic. Then did this to my /etc/default/grub in accordance with the aforementioned guide (/etc/grub.d/00_header edited as well): GRUB_DEFAULT=0 GRUB_HIDDEN_TIMEOUT=0 #GRUB_HIDDEN_TIMEOUT_QUIET=true GRUB_TIMEOUT=3 GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian` #GRUB_CMDLINE_LINUX_DEFAULT="quiet splash" GRUB_CMDLINE_LINUX="" GRUB_GFXMODE=1680x1050x32 To my surprise I can now use my ttys in native resolution. Black screen between grub2 menu and gnome login screen is still there though. That is annoying since I also use an encrypted disk thus having to enter my passphrase in total dark... Still looking for a solution but urgency is low. Downloaded and installed a later version of nvidia driver. No difference to last edit. Tried GRUB_CMDLINE_LINUX="vga="-parameter. No effect. nomodeset has no effect. not even in combination with vga=... Tried echo FRAMEBUFFER=y > /etc/initramfs-tools/conf.d/splash no effect (see comment) On the verge of resignation... Bounty period soon to end.

    Read the article

  • Change the Default Number of Rows of Tiles on the Windows 8 UI (Metro) Screen

    - by Lori Kaufman
    By default, Windows 8 automatically sets the number of rows of tiles to fit your screen, depending on your monitor size and resolution. However, you can tell Windows 8 to display a certain number of rows of tiles at all times, despite the screen resolution. To do this, we will make a change to the registry. If you are not already on the Desktop, click the Desktop tile on the Start screen. NOTE: Before making changes to the registry, be sure you back it up. We also recommend creating a restore point you can use to restore your system if something goes wrong. HTG Explains: Why Do Hard Drives Show the Wrong Capacity in Windows? Java is Insecure and Awful, It’s Time to Disable It, and Here’s How What Are the Windows A: and B: Drives Used For?

    Read the article

  • Screen goes nuts and unreadable

    - by ChazD
    Running Ubuntu 10.10 in its own partition, also have Oracle Virtualbox 4 with Windows XP. Because i previously had a problem with a dark screen when i let the laptop on and i didn't use it for a long while i had set Power settings to Never sleep, never let the Display sleep. Monitor on install set to Laptop resolution 1400 by 1050, refresh rate 60 Hz, rotation Normal. The problem was when the computer was left on and i returned after about an hour, the screen was unreadable, similar to what used to happen to graphics cards before multisync became normal. So it appears as though the graphics card was asked to use a resolution it couldn't handle and went nuts. I had to power off the system, on restart everything was fine. Thanks for any suggestions. ChazD

    Read the article

  • Composite Moon Map Offers Stunning Views of the Lunar Surface [Astronomy]

    - by Jason Fitzpatrick
    Researchers at Arizona State University have stitched together a massive high-resolution map of the moon; seen the moon in astounding detail. Using images fro the Lunar Reconnaissance Orbiter (LRO) they carefully stitch a massive map of the moon with a higher resolution than the public has ever seen before: The WAC has a pixel scale of about 75 meters, and with an average altitude of 50 km, a WAC image swath is 70 km wide across the ground-track. Because the equatorial distance between orbits is about 30 km, there is nearly complete orbit-to-orbit stereo overlap all the way around the Moon, every month. Using digital photogrammetric techniques, a terrain model was computed from this stereo overlap. Hit up the link below to check out the images and the process they used. Lunar Topography as Never Seen Before [via NASA] How to Make the Kindle Fire Silk Browser *Actually* Fast! Amazon’s New Kindle Fire Tablet: the How-To Geek Review HTG Explains: How Hackers Take Over Web Sites with SQL Injection / DDoS

    Read the article

  • Easy Scaling in XAML (WPF)

    - by Robert May
    Ran into a problem that needed solving that was kind of fun.  I’m not a XAML guru, and I’m sure there are better solutions, but I thought I’d share mine. The problem was this:  Our designer had, appropriately, designed the system for a 1920 x 1080 screen resolution.  This is for a full screen, touch screen device (think Kiosk), which has that resolution, but we also wanted to demo the device on a tablet (currently using the AWESOME Samsung tablet given out at Microsoft Build).  When you’d run it on that tablet, things were ugly because it was at a lower resolution than the target device. Enter scaling.  I did some research and found out that I probably just need to monkey with the LayoutTransform of some grid somewhere.  This project is using MVVM and has a navigation container that we built that lives on a single root view.  User controls are then loaded into that view as navigation occurs. In the parent grid of the root view, I added the following XAML: <Grid.LayoutTransform> <ScaleTransform ScaleX="{Binding ScaleWidth}" ScaleY="{Binding ScaleHeight}" /> </Grid.LayoutTransform> And then in the root View Model, I added the following code: /// <summary> /// The required design width /// </summary> private const double RequiredWidth = 1920; /// <summary> /// The required design height /// </summary> private const double RequiredHeight = 1080; /// <summary>Gets the ActualHeight</summary> public double ActualHeight { get { return this.View.ActualHeight; } } /// <summary>Gets the ActualWidth</summary> public double ActualWidth { get { return this.View.ActualWidth; } } /// <summary> /// Gets the scale for the height. /// </summary> public double ScaleHeight { get { return this.ActualHeight / RequiredHeight; } } /// <summary> /// Gets the scale for the width. /// </summary> public double ScaleWidth { get { return this.ActualWidth / RequiredWidth; } } Note that View.ActualWidth and View.ActualHeight are just pointing directly at FrameworkElement.ActualWidth and FrameworkElement.ActualHeight. That’s it.  Just calculate the ratio and bind the scale transform to it. Hopefully you’ll find this useful. Technorati Tags: WPF,XAML

    Read the article

  • Hurricanes Since 1851 [Visualization]

    - by Jason Fitzpatrick
    Much like you can map out volcanic eruptions to create a neat pattern around the Pacific Ring of Fire, you can also map out hurricanes and tropical storms. Check out this high-resolution visualization to see the pattern formed by a century and a half of storms. Courtesy of UXBlog and data from the National Oceanic and Atmospheric Administration, the above projection shows the path of tropical storms around the equator (the perspective, if the map looks unfamiliar to you, is bottom up with Antarctica and the lower portion of South America in the center). For a full resolution copy of the image and more information about how it was rendered, hit up the link below. Hurricanes Since 1851 [via Cool Infographics] How To Get a Better Wireless Signal and Reduce Wireless Network Interference How To Troubleshoot Internet Connection Problems 7 Ways To Free Up Hard Disk Space On Windows

    Read the article

  • Case Management Patterns with Oracle Unified Business Process Management Suite

    - by Ajay Khanna
    Contributed by Heidi Buelow, Oracle Product Management Case Management was a hot topic all week at Oracle OpenWorld so I was excited to share our current features and upcoming plans at the session Thursday morning on Case Management Patterns with Oracle Unified Business Process Management Suite.  My colleague, Ravi Rangaswamy, the Case Management Development Manager, and I, Heidi Buelow, the Case Management Product Manager, discussed case management use case patterns with an interested audience.  We also talked about the current BPM Suite offering for Case Managment and showed a demo of our upcoming release where Case Management becomes a first class component in a BPM composite application. Case Management use case patterns cover a wide range of horizontal applications such as Accounts Payable, Dispute Resolution, Call Center, Employee OnBoarding, and many vertical applications in domains and industries such as Public Sector services, Insurance claims, and Healthcare.  Really, it is any use case where the resolution of a request may require a knowledge worker making decisions using experienced judgement in the current situation.  This allows for expidited care and customer satisfaction, both being highly valued for consumer loyalty, regulatory compliance, and efficient resolution. Today, BPM Suite provides the tools for creating Case Management applications using BPMN 2.0, Business Rules, and rich BAM and Case Analytics.  The Process Composer provides the agility to change rules and processes by the business users.  The case manager and case workers have the flexibilty they need.  With integrated content management and the concept of a BPM Process Spaces instance (case) space, the current release enables case management use case applications. In the next release, Case Management becomes a first class component. By this, we mean, Case is a separate component in the composite.  We are adding case attributes such as milestones, case events, case stakeholders, and more, providing a rich toolset for the use cases that require a flexible Case Management approach.  Activites become available according to the conditions that you specify and information can be protected by permissions indicated.  In BPM Studio, you design a Case and associate all of the attributes and activities that are needed, yet, at runtime you have the flexibility to add and change these as needed. We enjoyed sharing Case Management and it was well received by the audience.  The presentation is available online and we have viewlets of the demo that will be available at release time.

    Read the article

  • Using External Monitor with Laptop Monitor as separate monitors

    - by user14623
    I am trying to use 32"LCD monitor with my ubuntu 10.10 installation. I am trying to use my laptop screen and external monitor at the same time but having two separate desktops. I also want to use my laptop with 1280x800 resolution and external one with 1920 x 1080 using VGA. However, ubuntu sees my external LCD as a CRT and provide 13....x... resolution at the best not above. My graphics card driver is Nvidia 270.... driver. Is ubuntu capable of using two monitors separately or should i give up? Thank you

    Read the article

  • Networking Guidelines

    - by ACShorten
    One of the things I have noticed in my years in IT is the changes in networking. In the past networking was pretty simple with the host name and name resolution (via DNS) being pretty simple. Some sites still use this simple networking setup. These days, more complex name resolution, proxies, firewalls, demarcation nd virtualization, can make networking more complex. This can cause issues when installing products with in built networking that can frustrate even seasoned veterans. I have put together a few basic guidelines to hopefully help along with product installation and getting a product to operate in a somewhat complex network setup. All the components of the product (including the infrastructure) need to communicate via a network (even it is within a local machine/host). Ensure any host names referred to within configuration files are accessible via your networking setup. This may mean defining the hosts to the machines, to the DNS for name resolution and even your firewall to allow machines to communicate within your network. Make sure the ports used for any of the infrastructure are accessible (even through your firewall) and are unique within the host. Host duplication can cause the product to fail on startup as the port is already in use. If there are still issues, consider using localhost as your host name. I have used this in so many situations that I tend to use it now as a default anytime I install anything myself. Most Oracle products suggest to use localhost when using dynamic host or dynamic IP addresses and this is no different for the Oracle Utilities Application Framework. If you do use localhost then installing a Loopback Adapter for the operating system is recommended to force networking to a minimum. Usually localhost resolves to 127.0.0.1. When using multiple network connections, especially in a virtualized environment, ensure the host and ports used are relevent for the network cards you have setup. One of the common issues is finding the product is using a vierualized network card only to find that it is not setup for correct networking. If you are using the batch component, do not forget to ensure that the multicast protocol is enabled on your host and that the multicast address and port number specified are valid and accessible from all machines in the batch cluster (if clustering used). The same advice applies if you are using unicast where each host/port combination should be accessible. Hopefully these basic networking recommendations will help minimize any networking issues you might encounter.

    Read the article

< Previous Page | 60 61 62 63 64 65 66 67 68 69 70 71  | Next Page >