Search Results

Search found 3988 results on 160 pages for 'collision resolution'.

Page 67/160 | < Previous Page | 63 64 65 66 67 68 69 70 71 72 73 74  | Next Page >

  • How to fix display on external Samsung Syncmaster shifted to the right when connected to Macbook Pro?

    - by joe larson
    Is there something special I need to do to be able to use external LCD displays with my new MacBook Pro? Do I need extra software, or do I possibly need a different cable? I'm attempting to use an external display with my MBP. I've got a "Mini DisplayPort to VGA Female Adapter for Mac", plugged into the thunderbolt port on my MBP, which I understood should be compatible with thunderbolt. I've tried this with three different SyncMaster models: a B2330 (21.5"), a EX2220 (22"), and a third (also 22" ish) which I don't have the model # for -- but all are 1920x1080 resolution; plus an additional HP monitor of similar size and resolution. In all four cases, the MBP recognizes the screen and choses the correct resolution. However, the display is shifted over about 1 inch. This is true no matter if I change screen resolutions also. The controls on the monitor for horizontal position don't help. Also, sometimes (especially if I drag an app over into the second screen), the screen starts skipping left to right and having bands of fuzz. Additionally, the monitor will periodically blink off for a moment, trying to switch from Digital to Analog and back (the Syncmaster shows text on the screen to tell you it's trying to do this). Often when it comes back from one of these blank-outs, it will show OK (no skipping or fuzz) but still shifted right; then after a few seconds it will go wrong again skipping and fuzzy. This photo shows the worst of it. I've added red rectangles to show the physical edge of the screen, and a yellow rectangle to show the empty space on the left of the screen. (Sorry for the awful quality and lighting!) Also, it's worth noting I am on Mac OS X 10.6.7, and yes I have this update 1.4 installed.

    Read the article

  • Not able to find scripts present in /etc/profile.d directory [on hold]

    - by priya
    I am using Red Hat Linux 6.0 ... using davinchi board. I have to change system clock resolution so I am changing (HZ) env var. For this I have written script so that I can change HZ = 1000 n insert that script in /etc/profile.d and write code for loop in /etc/profile so that while running as usual /etc/profile can load the scripts present in /etc/profile.d. But when I am logging into the system at root level then showing error as "-bash: ./etc/profile.d/resolution.sh(my script name): No such file or directory Also here why it is showing ./etc and not /etc . Is something related to that?? Also I tried to add script in /etc/init.d but still no change in value of HZ takes place. Please tell where to change so that this env var can get changed. The script(resolution.sh) written has :- #!/bin/bash export HZ=1000 The content of /etc/profile which I entered is: if [ -d /etc/profile.d ]; then for i in /etc/profile.d/*.sh; do if [ -r $i ]; then .$i fi done unset i fi And the output of grep command is -rw-r--r-- 1 root root 535 Feb 4 2004 profile -rwxr-xr-x 2 root root 4096 Feb 2 2004 profile.d

    Read the article

  • Finding custom printer-specific options on *nix

    - by enbuyukfener
    Hey all, I have a printer set up using CUPS (FujiXerox Document Center 1100), it is named DC1100. There are capabilities of the printer that are not shows as options of the printer as listed by: lpoptions -l -d DC1100 The output is below: PrintoutMode/Printout Mode: Draft *Normal High Photo InputSlot/Media Source: Upper Lower MultiPurpose LargeCapacity Manual *Standard PageSize/Page Size: *Letter A4 C5 C6 COM10 DL Executive Legal Monarch Statement PageRegion/PageRegion: Letter A4 C5 C6 COM10 DL Executive Legal Monarch Statement STP_Brightness/Brightness: 0.00 0.02 0.04 [snip] 2.00 STP_Contrast/Contrast: 0.00 0.05 0.10 0.15 [snip] 4.00 STP_ColorCorrection/Color Correction: Accurate Bright Density [snip] Uncorrected STP_DitherAlgorithm/Dither Algorithm: Adaptive EvenTone Fast [snip] VeryFast STP_EnableDensity/Density Enable: *Disabled Enabled STP_Density/Density Value: 0.1 0.2 0.3 0.4 [snip] 8.0 STP_EnableGamma/Composite Gamma Enable: *Disabled Enabled STP_Gamma/Composite Gamma Value: 0.10 0.15 0.20 0.25 [snip] 4.00 STP_LinearContrast/Linear Contrast Adjustment: *False True STP_Duplex/Double-Sided Printing: DuplexNoTumble DuplexTumble *None Resolution/Rendering Resolution: *FromPrintoutMode 150x150dpi 300x300dpi 600x600dpi OutputType/Output Type: *FromPrintoutMode BlackAndWhite Grayscale STP_ImageType/Image Type: *FromPrintoutMode Photo Graphics LineArt None Text TextGraphics STP_Resolution/Resolution: *FromPrintoutMode 150dpi 300dpi 600dpi I am particularly looking for options for: "secure print" (possibly by setting a mode and setting a username) stapling hole punching Perhaps I need a vendor specific driver/PPD file? If so, any pointers as I have no idea where to look for one. I haven't been able to find one on the official site or on sites such as http://www.openprinting.org

    Read the article

  • Prevent Windows from resizing all the apps on the desktop when switching monitors

    - by Greg Hewgill
    Short version: When moving my laptop and sleeping between using different monitors, all my open windows are crammed into the upper left corner as if they tried to fit on the laptop internal screen resolution. I plug in and switch to the external monitor before unlocking my session. Is there a way to prevent this automatic resizing? Longer version: I have a laptop that I move between two locations. I have one docking station, and the same kind of monitor configured for 1600x1200, in both locations. The internal laptop screen is awful so I don't use it. Location A: Docking station, monitor connected via DVI. Location B: No docking station, external monitor connected via VGA cable. In this location I have the laptop lid open for keyboard access but I don't use the laptop screen. When moving from Location A to Location B, the laptop wakes up from sleep, displaying the screen on the internal monitor. I switch to the external monitor display (using Fn+F8 on this laptop), and only after that do I unlock my session with my password. However, Windows has crammed all my nicely arranged windows into the upper left corner as if it were trying to fit them all on the laptop internal screen resolution. When moving from Location B to Location A, I have the laptop lid closed when using the docking station so Windows apparently concludes the screen resolution is 1600x1200 and doesn't resize any windows. The laptop is a Dell Latitude running Windows 7 Professional.

    Read the article

  • Connecting a laptop to a TV via HDMI

    - by Madmartigan
    I just bought a new Dell XPS17 laptop (Win7) that only has HDMI output. My last 2 laptops had VGA, which I used to connect to my Sony Bravia 32" TV with no issues, but with the HDMI it's been quite a headache. Drivers for display adapters have been updated to the latest versions: Intel(R) HD Graphics Family NVIDIA GeForce GT 550M I went to a store and plugged in to 4 different TVs from different manufacturers. A sales rep and I spent about 30 minutes being baffled by the results (which are the same as my current TV): Extreme buggy behavior in the Nvidia and Windows display/resolution control panel Can not extend or duplicate displays, can only select one Third and fourth output devices "randomly" detected by the Windows control panel Could not get the screen to fit the output (edges cut off on all sides by about a half inch) Resolution and colors less than perfect. Artifacts around text. Display "randomly" cuts out Defaults to TV output only when plugged in Can not change resolution on either device when connected No audio from the TV Plugged in to 3 monitors from different manufacturers: Defaults to duplicated displays when plugged in Everything works perfectly So far, four people have gone through all the settings in the latop with no luck. I had similar, but not exactly matching results with a different laptop. I'm using the Sony Bravia currently at home, but in order to get it to work I have to turn on the laptop, wait until the display shows up on it, close the lid, then cycle through each output channel on the TV until I come back around to the HDMI port again, but still I have the symptoms described above. However: Once in a while, it just works. Sometimes, seemingly randomly, the output fits the screen perfectly. Sometimes the audio comes through the speakers too, but not always. Usually my screen saver "Mystify" will come up with a message that it cannot be displayed due to a limitation of the video card, but then sometimes it works fine. These 3 things seem to be independent of each other and don't always happen together. So, is there any way to get the laptop to output correctly to a TV, or is it just not meant to be?

    Read the article

  • Serious 64-bit laptop

    - by Daniel Gehriger
    For the past couple of years, I have been using an IBM Thinkpad T60p for daily work (software development, desktop & embedded). I am extremely satisfied with this machine, due to its robustness. It also has a few features I depend on: a high resolution display: 15.0" TFT FlexView display with 1600x1200 (UXGA); excellent keyboard; decent graphics and CPU performance. Some of the software I develop benefits from larger amounts of RAM, and 3GB (Windows 7 32-bit) or 4GB (Windows 7 64-bit on T60p) are no longer sufficient. My customers run desktop computers with 20GB and more, and I need to have at least 8GB to at least be able to run reasonable test cases. So I'm shopping around for a new laptop, but I'm struggling to find anything that matches my requirements: must run Windows 7 64-bit Pro or higher; must support at least 8GB of RAM (more is better) high screen resolution! While I prefer 4:3 I can live with wide screen. But I really hope to find something with a vertical screen resolution similar to what I have now... portable, so < 16" but = 14" I realize that FlexView isn't available anymore, but I'd like to avoid a glossy screen if possible. decent (not more) graphics performance, ideally hybrid (I'm doing a lot of CAD, never games). good keyboard reasonable CPU -- but I'm still fine with my current Core 2 Duo, so that shouldn't be too complicated. The T60p fits all those requirements, except the 8GB of RAM. Can you help me find a current notebook that would match most of them? I don't mind changing brand. Thanks!

    Read the article

  • Did Adobe Photoshop just killed my Graphics Card for good?

    - by user6004
    I was working with Adobe Photoshop, just some regular work, when I came to edit a PSD file and change the text of some layer, when all of a sudden the PC froze. No mouse, screen is frozen, keyboard strokes aren't getting me anything, no Task Manager, nada. So I rebooted my PC, and then something quite terrifying appeared before my eyes. It was not the Checkdisk utility that was launched, that made me terrified (by the way, that reboot damaged the partition table of an external HDD that was connected at the time to my PC, but that's another story). It was the screen itself. Please have a look. So after Checkdisk finished and Windows loaded, I noticed that the resolution was not right. Instead of 1440x900 which I had set, it was 1280x1024. When I went to change it back, I had no option to change back to my old resolution, and has only 3 other general resolution properties, as if my Video Card (GeForce 8800 GTS btw) was not recognized. And what do you know, in the Device Manager it appeared with an exclamation mark. Inside the hardware, it said this: Windows has stopped this device because it has reported problems. (Code 43) Uninstalling the drivers, downloading the newest drivers from NVIDIA and installing them did not work. It always comes back to this. So, do you have any advice before I go out and buy a new graphics card? I thought this was the only option left, but maybe the experts at Super User can help me out. By the way, the dotted screen appears after every reboot, and I see the dots when the ASUS Motherboard screen shows up at boot. Thanks in advance.

    Read the article

  • How to change font size on display

    - by Tim
    My laptop is Lenovo T400, whose screen size is 14.1 inches and default resolution is 1440 x 900. My main OS is Ubuntu 10.10. The default font size on the display is somehow small, which might contribute to the fatigue of my eyes. My previous laptop is Acer 5000, whose screen size is 15.4 inches and the default resolution is 1024 x 768. I like reading on my old laptop better than on my new one. Is it possible to change the setting of my new one to look like reading my old one? What are the parameters that control the font size? Are screen size, resolution part of them? In Windows, there are choices for font size, while in Ubuntu I haven't find out where I can change the setting and would like know if someone here knows about it. I also wonder if I can use a separate bigger display (perhaps just like a desktop display) as the display of my laptop, in case I don't want to enlarge font size at the cost of sacrificing the amount of the content to display, and how I shall do it? Thanks and regards!

    Read the article

  • How to determine which enemy is hit and destroy it alone

    - by Jon Ferriter
    http://jsfiddle.net/5DB6K/ I have this game being made where you shoot enemies from the sides of the screen. I've got the bullets moving and being removed when they reach the end of the screen (if they didn't hit any enemy) and removing the enemy when they collide with it. //------------collision----------------// if(shot === true){ bulletY = $('.bullet').position().top + 2; bulletX = $('.bullet').position().left + 2; $('.enemy').each(function(){ if($('.enemy').hasClass('smallEnemy')){ enemyY = $(this).position().top + 7; enemyX = $(this).position().left + 7; if(Math.abs(bulletY - enemyY) <= 9 && Math.abs(bulletX - enemyX) <=9){ $(this).remove(); score = score + 40; bulletDestroy(); } } }); } However, the bullet destroys every enemy if the collision check is right which isn't what I want. I want to check if the enemy has the class of either smallEnemy, medEnemy, or lrgEnemy and then do the collision check which is what I thought I had but it doesn't seem to work. Also, the game starts to lag the more and more time goes on. Would anyone know the reason for that?

    Read the article

  • Float PPM image file format?

    - by Luca
    I've found a PPM image with the header starting with PF. The resolution number is stored in floating point (-1.000). No comments are inserted to get how it was produced. From the resolution, each pixel is composed by 12 bytes (4 bytes per component)... I suppose they are float or integer numbers. The problem is that I cannot get a clear image. Someone has already found this kind of images?

    Read the article

  • iPad OpenGL ES FPS too slow!

    - by pop850
    I'm currently working on an OpenGL ES 1.1 app for the iPad its running at full 768x1024 iPad resolution, with textures, polygons, and the works but only at about 30 fps! (not fast enough for my purposes) im pretty sure its not my code, because when i lowered the resolution, the FPS increased, eventually the normal 60 at iPod touch resoultion Is anyone else encountering this FPS slowdown? should I reduce the size then scale up? any guidance is much appreciated!

    Read the article

  • How to acquire still webcam image

    - by Silv3rSurf
    I need some help deciding what to use to acquire an image from a webcam. I want to acquire a single image. I know you can typically acquire a still image at a higher resolution than a single video frame. Currently, I am using MATLAB's image acquisition toolbox.. which apparently only supports obtaining frames in video mode(so lower resolution). Which other libraries do you recommend? Has anyone else encountered this problem?

    Read the article

  • how to center align a light box and hide a scrollbar.

    - by Mayur
    Hi All, I m web designer and getting problem in adjustment of light box. light box is not center aligned at any resolution. it should be center aligned at any resolution. and i used a black overlay for transparency in background but it shows scrollbars in light box so its not look good .... plz tell how could i center align a lightbox and hide a scrollbar .......... Thanks Mayur

    Read the article

  • XNA/C# Game Settings (Menu?)

    - by PCAddict
    It's my first time trying to make anything really interesting in C# and I was trying to make a simple form or game screen where the user could define a custom resolution/screen ratio etc. or to automatically detect the max screen size/ratio and output? its my first game, so I was wondering if it was possible or if there would be any major issues with such, rather than just setting it to 1366x768 (the resolution of all of my computers). Thanks in advance for any assistance.

    Read the article

  • How to still webcam image

    - by Silv3rSurf
    I need some help deciding what to use to acquire an image from a webcam. I want to acquire a single image. I know you can typically acquire a still image at a higher resolution than a single video frame. Currently, I am using MATLAB's image acquisition toolbox.. which apparently only supports obtaining frames in video mode(so lower resolution). Which other libraries do you recommend? Has anyone else encountered this problem?

    Read the article

  • How to solve this problem in Vaadin Table?

    - by Kumar
    Hi Friends, I used Vaadin Table component in my application and i set a page length to 15, Length of the Table is not consistent in different screens resolutions . For example in 1440 x 900 resolution height of the table is big but in 1280 x 1024 resolution the height of the table is less . I don't know how to solve this problem.Can any one help me to sort out this problem. Thanks in advance.

    Read the article

  • track mouse movements on 800 x 600 and show on 1024 x 768

    - by peter
    i am tracking the mouse movements of a user using javascript and storing it along with the browser resolution. Then i can check the user mouse movement in my browser which is 1024 x 768 resolution. But if the user is using a browser in 800 x 600 then the mouse movements are recorded wrt 800 x 600. And when i see the mouse movements in 1024 x 768 the mouse movements are wrong. So how can i scale from 800 x 600 to 1024x 768?

    Read the article

  • Automatically adjustment of wxPython Frame Size

    - by MA1
    Hi All How to adjust the wxPython Frame Size automatically when screen resolution change? Actually, i have just written a wxPython application, currently Frame size is fixed. Due to this application/frame size is very large on some screen resolutions. So, how to resize/adjust automatically depending on the screen resolution size? Regards,

    Read the article

  • I want to change DPI with Imagemagick without changing the actual byte-size of the image data

    - by user1694803
    I feel so horribly sorry that I have to ask this question here, but after hours of researching how to do an actually very simple task I'm still failing... In Gimp there is a very simple way to do what I want. I only have the German dialog installed but I'll try to translate it. I'm talking about going to "Picture-PrintingSize" and then adjusting the Values "X-Resolution" and "Y-Resolution" which are known to me as so called DPI values. You can also choose the format which by default is "Pixel/Inch". (In German the dialog is "Bild-Druckgröße" and there "X-Auflösung" and "Y-Auflösung") Ok, the values there are often "72" by default. When I change them to e.g. "300" this has the effect that the image stays the same on the computer, but if I print it, it will be smaller if you look at it, but all the details are still there, just smaller - it has a higher resolution on the printed paper (but smaller size... which is fine for me). I am often doing that when I am working with LaTeX, or to be exact with the command "pdflatex" on a recent Ubuntu-Machine. When I'm doing the above process with Gimp manually everything works just fine. The images will appear smaller in the resulting PDF but with high printing quality. What I am trying to do is to automate the process of going into Gimp and adjusting the DPI values. Since Imagemagick is known to be superb and I used it for many other tasks I tried to achieve my goal with this tool. But it does just not do what I want. After trying a lot of things I think this actually is be the command that should be my friend: convert input.png -density 300 output.png This should set the DPI to 300, as I can read everywhere in the web. It seems to work. When I check the file it stays the same. file input.png output.png input.png: PNG image data, 611 x 453, 8-bit grayscale, non-interlaced output.png: PNG image data, 611 x 453, 8-bit grayscale, non-interlaced When I use this command, it seems like it did what I wanted: identify -verbose output.png | grep 300 Resolution: 300x300 PNG:pHYs : x_res=300, y_res=300, units=0 (Funny enough, the same output comes for input.png which confuses me... so this might be the wrong parameters to watch?) But when I now render my TeX with "pdflatex" the image is still big and blurry. Also when I open the image with Gimp again the DPI values are set to "72" instead of "300". So there actually was no effect at all. Now what is the problem here. Am I getting something completely wrong? I can't be that wrong since everything works just fine with Gimp... Thanks for any help in this. I am also open to other automated solutions which are easily done on a Linux system...

    Read the article

  • collsion issues with quadtree [on hold]

    - by QuantumGamer
    So i implemented a Quad tree in Java for my 2D game and everything works fine except for when i run my collision detection algorithm, which checks if a object has hit another object and which side it hit.My problem is 80% of the time the collision algorithm works but sometimes the objects just go through each other. Here is my method: private void checkBulletCollision(ArrayList object) { quad.clear(); // quad is the quadtree object for(int i=0; i < object.size();i++){ if(object.get(i).getId() == ObjectId.Bullet) // inserts the object into quadtree quad.insert((Bullet)object.get(i)); } ArrayList<GameObject> returnObjects = new ArrayList<>(); // Uses Quadtree to determine to calculate how many // other bullets it can collide with for(int i=0; i < object.size(); i++){ returnObjects.clear(); if(object.get(i).getId() == ObjectId.Bullet){ quad.retrieve(returnObjects, object.get(i).getBoundsAll()); for(int k=0; k < returnObjects.size(); k++){ Bullet bullet = (Bullet) returnObjects.get(k); if(getBoundsTop().intersects(bullet.getBoundsBottom())){ vy = speed; bullet.vy = -speed; } if(getBoundsBottom().intersects(bullet.getBoundsTop())){ vy = -speed; bullet.vy = speed; } if(getBoundsLeft().intersects(bullet.getBoundsRight())){ vx =speed; bullet.vx = -speed; } if(getBoundsRight().intersects(bullet.getBoundsLeft())){ vx = -speed; bullet.vx = speed; } } } } } Any help would be appreciated. Thanks in advance.

    Read the article

  • How to properly scroll a 2D tilemap?

    - by Sri Harsha Chilakapati
    Hello and I'm trying to make my own game engine in Java. I have completed all the necessary ones but I can't figure it out with the TileGame class. It just can't scroll. Also there are no exceptions. Here I'm listing the code. TileGame.java @Override public void draw(Graphics2D g) { if (back!=null){ back.render(g); } if (follower!=null){ follower.render(g); follower.draw(g); } for (int i=0; i<actors.size(); i++){ Actor actor = actors.get(i); if (actor!=follower&&getVisibleRect().intersects(actor.getBounds())){ g.drawImage(actor.getAnimation().getFrameImage(), actor.x - OffSetX, actor.y - OffSetY, null); actor.draw(g); } } } /** * This method returns the visible rectangle * @return The visible rectangle */ public Rectangle getVisibleRect(){ return new Rectangle(OffSetX, OffSetY, global.WIDTH, global.HEIGHT); } @Override public void update(){ if (follower!=null){ if (scrollHorizontally){ OffSetX = global.WIDTH/2 - Math.round((float)follower.x) - tileSize; OffSetX = Math.min(OffSetX, 0); OffSetX = Math.max(OffSetX, global.WIDTH - mapWidth); } if (scrollVertically){ OffSetY = global.HEIGHT/2 - Math.round((float)follower.y) - tileSize; OffSetY = Math.min(OffSetY, 0); OffSetY = Math.max(OffSetY, global.HEIGHT - mapHeight); } } for (int i=0; i<actors.size(); i++){ Actor actor1 = actors.get(i); if (getVisibleRect().contains(actor1.x, actor1.y)){ actor1.update(); for (int j=0; j<actors.size(); j++){ Actor actor2 = actors.get(j); if (actor1.isCollidingWith(actor2)){ actor1.collision(actor2); actor2.collision(actor1); } } } } } but the problem is that all the actors are working, but it just won't scroll. Help Please.. Thanks in Advance.

    Read the article

  • AS3: StageWidth for BOX2D?

    - by Gabriel Meono
    I know BOX2D uses meters, and AS3 uses pixels. I'm trying to create objects which are limited to the stageWidth. If I do this variable: for (var i:int = 0; i<(stage.stageWidth); i++){...} The animation will freeze, and this output appears: TypeError: Error #1009: Cannot access a property or method of a null object reference. at Box2D.Collision::b2BroadPhase/CreateProxy() at Box2D.Collision.Shapes::b2Shape/CreateProxy() at Box2D.Dynamics::b2Body/CreateShape() at com.actionsnippet.qbox.objects::CircleObject/build() at com.actionsnippet.qbox::QuickObject/init() at com.actionsnippet.qbox::QuickObject() at com.actionsnippet.qbox.objects::CircleObject() at com.actionsnippet.qbox::QuickBox2D/create() at com.actionsnippet.qbox::QuickBox2D/addCircle() at BOX2D_Test_Tutorial_fla::MainTimeline/frame1() Does anyone know how to fix this? Full Code: [SWF(width = 350, height = 600, frameRate = 60)] import com.actionsnippet.qbox.*; var sim:QuickBox2D = new QuickBox2D(this); sim.createStageWalls(); // make a heavy circle sim.addCircle({x:3, y:3, radius:0.4, density:1}); // create a few platforms // make pins for (var i:int = 0; i<(stage.stageWidth); i++){ //End sim.addCircle({x:1 + i * 1.5, y:18, radius:0.1, density:0}); sim.addCircle({x:2 + i * 1.5, y:17, radius:0.1, density:0}); sim.addCircle({x:1 + i * 1.5, y:16, radius:0.1, density:0}); sim.addCircle({x:2 + i * 1.5, y:15, radius:0.1, density:0}); //Mid end sim.addCircle({x:0 + i * 2, y:14, radius:0.1, density:0}); sim.addCircle({x:0 + i * 2, y:13, radius:0.1, density:0}); sim.addCircle({x:0 + i * 2, y:12, radius:0.1, density:0}); sim.addCircle({x:0 + i * 2, y:11, radius:0.1, density:0}); sim.addCircle({x:0 + i * 2, y:10, radius:0.1, density:0}); } sim.start(); sim.mouseDrag();

    Read the article

  • 45° Slopes in a Tile based 2D platformer

    - by xNidhogg
    I want to have simple 45° slopes in my tile based platformer, however I just cant seem to get the algorithm down. Please take a look at the code and video, maybe I'm missing the obvious? //collisionRectangle is the collision rectangle of the player with //origin at the top left and width and height //wantedPosition is the new position the player will be set to. //this is determined elsewhere by checking the bottom center point of the players rect if(_leftSlope || _rightSlope) { //Test bottom center point var calculationPoint = new Vector2(collisionRectangle.Center.X, collisionRectangle.Bottom); //Get the collision rectangle of the tile, origin is top-left Rectangle cellRect = _tileMap.CellWorldRectangle( _tileMap.GetCellByPixel(calculationPoint)); //Calculate the new Y coordinate depending on if its a left or right slope //CellSize = 8 float newY = _leftSlope ? (calculationPoint.X % CellSize) + cellRect.Y : (-1 * (calculationPoint.X % CellSize) - CellSize) + cellRect.Y; //reset variables so we dont jump in here next frame _leftSlope = false; _rightSlope = false; //now change the players Y according to the difference of our calculation wantedPosition.Y += newY - calculationPoint.Y; } Video of what it looks like: http://youtu.be/EKOWgD2muoc

    Read the article

  • Edge Detection on Screen

    - by user2056745
    I have a edge collision problem with a simple game that i am developing. Its about throwing a coin across the screen. I am using the code below to detect edge collisions so i can make the coin bounce from the edges of the screen. Everything works as i want except one case. When the coin hits left edge and goes to right edge the system doesnt detect the collision. The rest cases are working perfectly, like hitting the right edge first and then the left edge. Can someone suggest a solution for it? public void onMove(float dx, float dy) { coinX += dx; coinY += dy; if (coinX > rightBorder) { coinX = ((rightBorder - coinX) / 3) + rightBorder; } if (coinX < leftBorder) { coinX = -(coinX) / 3; } if (coinY > bottomBorder) { coinY = ((bottomBorder - coinY) / 3) + bottomBorder; } invalidate(); }

    Read the article

< Previous Page | 63 64 65 66 67 68 69 70 71 72 73 74  | Next Page >