Search Results

Search found 2355 results on 95 pages for 'dvd rom'.

Page 64/95 | < Previous Page | 60 61 62 63 64 65 66 67 68 69 70 71  | Next Page >

• Windows 7 installation too slow

  - by BizApps

  I have P.C with Emaxx Motherboard : emx-a55gm-icafe with AMD dual core processor,500 GB WD Sata HDD,2GB of RAM,samsung dvdr,windows 7 dvd which is all brandnew. When i was trying to install windows 7 ulitmate on my P.C it really takes hours on setting up, which is really rare and i'm still hopeless getting a solution for this.But I don't have any issue installing windows 7 on my HP laptop that can be finished within just more than 20minutes. There is same issue that ive search in google and disabling the floppy disk drive in BIOS is their solution, but my problem is, Emaxx icafe doesnt have floppy disk drive setting on bios. I already change ACHI/IDE Support but i have still no luck. Is there any solution for this? Thanks in Regards

  Read the article

• Firewire hard drive with Leopard install image won't boot from PPC Mac Mini

  - by GregH

  I have a Mac Mini (G4 - 1.25 GHz PowerPC) running osx 10.3.9. I want to upgrade it to 10.5 (Leopard). The problem is that I only have a CD and no DVD. After working through all of these issues, I got myself a firewire hard drive and both a 10.4 and 10.5 image that I could image on to the hard drive. I was able to successfully boot off the firewire drive with the 10.4 image. However, I am not able to boot off the firewire drive with the 10.5 image. When trying to boot under the 10.5 image I specify the firewire drive as the startup drive. However, it just boots to the internal (10.3) drive. Any idea why it won't boot to the 10.5 image?

  Read the article

• Office 2007 Setup prompts for PptLR.cab

  - by kamleshrao

  While running Office 2007 Ultimate Setup on Windows 7 box, I get this error message - "Setup cannot find PowerPoint.en-us\PptLR.cab". This file is very much present in the setup folder. It gives me an option to choose the correct path of this file, but when I browse and navigate to the folder containing this file, it doesn't show me the CAB file for selection. I tried installing both from DVD and also running setup from hard disk location. The same setup media was used earlier for installation on Vista without any issues!

  Read the article

• Which part of the computer needs all the power from the PSU?

  - by Xeoncross

  A couple years ago I was building a new Core 2 Quad system and after reading all the reviews was convinced that I would need at least a 400 watt power supply unit (PSU). I bought a 500W Antec EarthWatts However, last year I bought a Kill-A-Watt power meter to test some things around our house and found that my PC was only using 80W of power while idle! (C2Q, 4GB RAM, SATA HD, & DVD burner) Well, here I am building another computer with a 65watt Core 2 CPU in it and I'm wondering if I can skimp out this time and get a 300watt or so unit since my usage doesn't seem to be what everyone claims it is. I'm sure that the people in the reviews who exhausted 500watt PSU weren't lying - so what is it that uses all that? The high-end dual SLI video cards? Lots of SATA drives? Overclocking?

  Read the article

• Cannot install Windows 7 on new PC (BSOD during installation)

  - by andronz

  Yesterday I had received new hardware and tried to assemble all of it. But when I was installing Windows 7 x64 for two times I got a BSOD, and a error message like this: Your PC has rebooted unexpectly, installation will continue after reboot. I have checked everything and tried to install once more time. It was almost successful, Windows had installed, but I cannot format my disk, open cmd or control panel, boot from DVD etc. It's the first time I have assembled a PC, and I don't know where the problem is, in my hardware or in Windows. My components: MSI z77a-g43 Intel i5 3570k Seagate Barracuda (plug into sata3 slot 6 Gb, there I have also sata 3 Gb slot) Corsair XMS3 (4x4Gb) HIS IceQ Also in the BIOS, I have changed RAM frequency to DDR3 1600 and voltage to 1.65v

  Read the article

• SATA-II motherboard and drives but only connected at SATA-I

  - by Shevek

  I have an Abit AB9 QuadGT motherboard which has a SATA-II controller. Connected to it I have a Kingston SSDNow V Series 64GB as boot drive and a Seagate Barracuda 7200.10 as a data drive. I also have 2 x Optiarc AD-7170S DVD burners attached by SATA. Both SSD and HDD are SATA-II and the optical drives are SATA-I. I have just run CrystalDiskInfo and this is reporting that both SSD and HDD are connected at SATA-I (1.5 Gbps), not SATA-II (3.0 Gbps). I have the BIOS set up to use SATA drives in IDE mode. So a few questions: Is CrystalDiskInfo reporting correctly? Are the optical drives causing the SSD & HDD to connect at the slower rate? Is there any setting to force the SSD & HDD to use SATA-II? I'm running Windows 7 Ultimate.

  Read the article

• kickstart: reference floppy drive via %ksappend or %include

  - by virtualeyes

  Having trouble getting %ksappend or %include to work when referencing a local floppy drive. Booting off remote server's cd-rom drive I am able to load the CentOS 6 minimal install image, and then add ks=hd:fd0/ks-jvm.cfg to boot params to load kickstart init file from floppy disk. That works fine. The problem is that I want to load a streamlined generic init file off the floppy and then, within the init, %ksappend or %include specific config files relative to the type of server I'm building (JVM, MySQL, Apache, etc.) I do not have DHCP, networking needs to be specified statically, so %ksappend and %include both fail when attempting to reference http://some-LAN-IP/foo.cfg since networking has not yet been set. The kickstart setup only works when I glob in the entire config into a single file, which is great, but ugly and difficult to maintain when I return later, having forgotten the original setup. At this point I'd be happy if I could get %ksappend or %include working with a floppy drive reference in the %post section; that would consolidate a lot of common boilerplate that all kickstarts will rely on (sshd_config, rsync config, resolve.conf, and so on) Thanks for providing the magic floppy drive reference that is eluding me!

  Read the article

• Play Halo on the Xbox360 Arcade

  - by Jeremy Rudd

  I'm looking at purchasing a Xbox360 because I've wanted to catch up with the Halo trilogy. Does the cheap Arcade edition console support Halo 2 Halo 3? Halo Wars? Would I be able to save my game progress in single player? Would I be able to play online in typical maps? General questions: Would I be able to play games using the DVD drive or do I have to download everything? Does the tiny HDD hurt even if I don't download any games, trailers or music? Are there any other differences in comparison to the Xbox360 Pro? I have a regular TV that uses the composite cable, so I don't need the HDTV support in the Pro edition.

  Read the article

• Ubuntu 9.1 Install from Disc Stalls After "Install Ubuntu" Sleclection is Made - eMachine

  - by nicorellius

  I am trying to install Ubuntu 9.1 from the ISO on a CD (it needs to be this version) on an eMachine with a brand new Seagate hard disk. The CD boots OK, and I choose the language. Then I am presented with the choices: Try Ubuntu Install Ubuntu.... etc, etc... I have tried the top two choices several times (trying Ubuntu and installing it), but each and every time the installation stalls and the disc stops spinning right after I hit enter after choosing the option I want. I have tried different CD/DVD drives, changing the jumpers on both CD drives, different hard drives, and nothing works. Maybe there is a BIOS setting that is choking the installation? Any help would be appreciated.

  Read the article

• How to install Snow Leopard Server over Regular Snow Leopard

  - by SeniorShizzle

  I'm in the ADC so I have legitimate access to a free copy of Snow Leopard Server and licence key which I need to use to test my Push Notifications. I downloaded the software, and when I opened the .dmg I saw "Click to install Snow Leopard Server" which I did, and then it prompted me to restart the computer to begin installation. When the computer restarted, however, it just booted into my regular OS X partition. I kept trying to no avail. Obviously I'm missing something stupid here but I'm not a server admin so I don't know what to do :) The dmg is almost 6GB so I can't burn a DVD of it. I really need your help! Thanks guys!

  Read the article

• Can't upgrade Windows Server 2012 Essentials to Windows Server 2012 R2 Essentials

  - by Magnus

  So today was RTM of Windows Server 2012 R2 Essentials released. I immediately tried to do an in-place upgrade of an existing RTM 2012 Essentials to RTM 2012 R2 Essentials, but get: Windows Server 2012 Essentials cannot be upgraded to Windows Server 2012 R2 Essentials. You can choose to install a new copy of Windows Server 2012 R2 Essentials instead, but this is different from an upgrade, and does not keep your files, settings, and programs. You’ll need to reinstall any programs using the original installation discs or files. To save your files before installing Windows, back them up to an external location such as a CD, DVD, or external hard drive. To install a new copy of Windows Server 2012 R2 Essentials, click the Back button in the upper left-hand corner, and select “Custom (advanced)”. This seems a bit odd, is this really the case? I can't find anything in the official documentation stating that this upgrade isn't possible.

  Read the article

• Windows Updates Fails Server 2008 0x80070490

  - by Mark Robinson

  I have a server with Windows Server 2008 Standard x64 Edition installed. This has been installed and running for several months and I have been able to successfully install previous Windows Updates. I have two pending updates that fail to install. (KB967723) Security update for Windows Server 2008 x64 Edition (KB976098) Update for Windows Server 2008 x64 Edition Fails with Error code: 80070490 Followed this off Microsoft support site, which basically says to repair Windows with the install DVD. When I get to the step to select upgrade I get the following error. Upgrade has been disabled. The upgrade cannot be started. To upgrade, cancel the installation and then choose to upgrade to a version of windows that is more recent then the version you are currently running. So basically feel like I've hit a dead end with out doing a complete reinstall. Any ideas ?

  Read the article

• SATA 300 mobo and drives but only connected at SATA 150

  - by Shevek

  I have an Abit AB9 QuadGT motherboard which supports SATA 300 drives Connected to it I have a Kingston SSDNow V Series 64GB as boot drive and a Seagate Barracuda 7200.10 as a data drive. I also have 2 x Optiarc AD-7170S DVD burners attached by SATA Both SSD and HDD are SATA 300 and the optical drives are SATA 150 I have just run CrystalDiskInfo and this is reporting that both SSD and HDD are connected at SATA 150, not SATA 300. I have the BIOS set up to use SATA drives in IDE mode. So a few questions: Is CrystalDiskInfo reporting correctly? Are the optical drives causing the SSD & HDD to connect at the slower rate? Is there any setting to force the SSD & HDD to use SATA 300? I'm running Windows 7 Ultimate

  Read the article

• What is the minimum power supply wattage needed for a Pentium 2.4GHz system?

  - by scottmarlowe

  It looks like I've got a dead Antec True 330 power supply in an older desktop that has an Intel D845PESV motherboard, a Pentium 2.4GHz processor, 2 dvd/cd writers, 2 hard drives, and other typical devices. I have an even older computer that is not being used that has a 200W power supply. Can a 200W power supply drive what I've listed above? Or, put another way, what is the minimum power supply specs for the above system? (A new 350W power supply will run me $30--so buying a new one is not a problem--but I'm curious about the question nonetheless).

  Read the article

• Recover lost NTFS partition on SSD

  - by Emil

  Hello, About 2 month ago I upgraded my Dell Latitude E6500 laptop with a Corsair Force F120 SSD drive. Everything worked well until about a week or so back. I started the computer and was faced with a beep and a message saying "No boot sector on Internal HDD (IRRT). No bootable devices". Since I figured that the boot sector had somehow got corrupt I tried booting from the Windows 7 dvd in order to repair the boot sector. But the Windows 7 installation program only found a blank drive with 111GB of unallocated space. I panicked and brought the drive with me to work to let a colleague have a look at it. We made a disk image of the entire drive and ran the drive through Testdisk in Linux. Testdisk did not find any partitions. It appears that the drive has been completely erased... What has happened? What is causing this behavior on an SSD?

  Read the article

• Two SATA HDDs connected using a Black Duet HDD Docking Station via eSATA to my Laptop, second drive

  - by leeand00

  Hi I am using a BlacX Duet HDD Docking Station to connect a 1TB WD Caviar Black SATA HDD (WD10000LSRTL) and a HITACHI SATA DESKSTAR (0S00163) to my G51VX (BestBuy) laptop via the eSATA port. When I plug in both HDDs in to the Docking Station, connect the docking station to my laptop and start Windows 7 (64-bit Ultimate), only the HDD in the first drive in the port actually shows up in My Computer and Disk Management. If I swap the drives positions I can get them both to work, but never at the same time. I also checked in the bios settings on the laptop, under Advanced-IDE Configuration-SATA Operation Mode, and it displays: SATA Operation Mode: [Enhanced] AHCI Port0 [Hard Disk] Device: Hard Disk Vendor: ST9320421AS LBA Mode: Supported S.M.A.R.T.: Supported AHCI Port5 [Hard Disk] Device: Hard Disk Vendor: Hitachi HDS721010CLA332 Size: 100.00 GB LBA Mode: Supported S.M.A.R.T.: Supported There should be a third drive, but I'm not certain why it is not being picked up. Additionally, before I played around with the settings in the IDE configuration, it used to display the DVD as well.

  Read the article

• Vista Startup Repair cannot repair my Toshiba Laptop (L300D)

  - by tdot

  I installed some updates, and now the computer doesn't boot up, it just keep's telling me to go to repair, which doesn't fix the problem. I see the BSOD on startup, but it flashes by too quick. (I also don't have Vista on DVD to do a reinstall if I need to) This is what I get from the Startup Repair details Problem Event Name StartupRepair V2 Problem Signature 01: External Media Problem Signature 02: 6.0.6001.18000.6.0.6001.18000 Problem Signature 03: 2 Problem Signature 04: 131074 Problem Signature 05: BadDriver Problem Signature 06: NoBootFailure Problem Signature 07: 0 Problem Signature 08: 0 Problem Signature 09: unknown Problem Signature 10: 1168 OS Version: 6.0.6001.2.1.0.256.1 Local ID: 1033 Any help will be appreciated. Thanks.

  Read the article

• Build a RAID-5 USB Array or NAS?

  - by TK Kocheran

  I'm looking to build a RAID-5 or RAID-6 hard disk array to be used as a centralized backup location for my home network. I have a lot of 4-8GB DVD ISO files which I intend to serve over the network to my TV using DLNA or something similar. I need decent write times, fast read times, and preferably a way to connect this array to my network router over USB. I'll probably be using ext3/4 on it (I'd use btrfs if my router supported it :-[). Is there a way to build a RAID array that is accessible over USB? I'm kind of new to this and most guides assume you're running a RAID array inside your machine. I need at least 5TB of space, and I need redundancy, so I prefer RAID-6. How can I go about accomplishing this?

  Read the article

• Error Message: Primary Slave Drive - ATAPI Incompatible

  - by Jaleel Dwight

  So I recently switched towers and now, all of a sudden, I'm getting this error message as soon as I boot my system. The error message reads "Primary Slave Drive - ATAPI Incompatible". This has really been frustrating since there's NO Primary Slave Drive even installed in my computer!! I have one hard drive installed which is recognized as the Primary Master & a DVD Drive which is recognized as the Secondary Master. My old system ran flawlessly. I'm beginning to think maybe my motherboard is bugging out cuz I fail to understand how it can be telling me that a "nonexistent" drive is incompatible. Any suggestions??

  Read the article

• Experience with AMCC 3ware 9650se raid cards? Ours seems dead

  - by antiduh

  We have a 8-port 3ware 9650se raid card for our main disk array. We had to bring the server down for a pending power outage, and when we turned the machine back on, the raid card never started. This card has been in service for a couple years without problems, and was working up until the shutdown. Now, when we turn the machine on, the bios option rom that normally kicks in before the bootloader doesn't show up, none of the drives start, and when the OS tries to access the device, it just times out. The firmware on it has been upgraded in the past, so it's possible we've hit some sort of firmware bug. We're using it in a Silicon Mechanics R272 machine with gentoo for the OS. The OS eventually boots, but alas, without the card. We've ordered a new one, but I'm worried that if we replace the card it won't recognize the existing array. Has anybody performed a card swap before? Any help would be greatly appreciated. Edit: These are the kernel errors we see: 3ware 9000 Storage Controller device driver for Linux v2.26.02.012. 3w-9xxx 0000:09:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 3w-9xxx 0000:09:00.0: setting latency timer to 64 3w-9xxx: scsi0: ERROR: (0x06:0x000D): PCI Abort: clearing. 3w-9xxx: scsi0: ERROR: (0x06:0x001F): Microcontroller not ready during reset sequence. 3w-9xxx: scsi0: ERROR: (0x06:0x0036): Response queue (large) empty failed during reset sequence. 3w-9xxx 0000:09:00.0: PCI INT A disabled

  Read the article

• How do I remove a repository of yum

  - by sunil

  When I search for a package in yum(centos 6), it tries to search in a repro named 'c6-media' And it gives a bunch of errors as follows file:///media/CentOS/repodata/repomd.xml: [Errno 14] Could not open/read file:///media/CentOS/repodata/repomd.xml Trying other mirror. file:///media/cdrecorder/repodata/repomd.xml: [Errno 14] Could not open/read file:///media/cdrecorder/repodata/repomd.xml Trying other mirror. file:///media/cdrom/repodata/repomd.xml: [Errno 14] Could not open/read file:///media/cdrom/repodata/repomd.xml Trying other mirror. Error: Cannot retrieve repository metadata (repomd.xml) for repository: c6-media. Please verify its path and try again Obviously the error seems to say that yum is trying to search for the CD/DVD which installed the OS. I do not have it now. All I want to do now is to delete this repository from yum. I went to the package manager graphical tool and removed this from the sources. Seems yum and the graphical tool do not use the same config. This is just my guess.

  Read the article

• XBMC: Viewing podcasts in 'Library Mode'

  - by greggannicott

  I'm having a great time getting to know XBMC, and so far for the most part I've been really happy with the results. I was chuffed when I followed the advice on this SU post and added TWiT as a video podcast with ease. However, when I go into Library Mode I can no longer access the podcasts I've added. I realise that one simple work-around is to come out of Library Mode to view podcasts, but in order to keep everything as simple (and appealing) to my wife as possible I'd rather remain in Library Mode so that on the rare occasion she wants to watch a DVD, she can do so without my help. Does anyone know a way to display podcasts in library mode? If this isn't possible is there a more elegant solution/work-around to going back and forth between library mode? Many thanks.

  Read the article

• Problems with kickstart script, partition info crashes deployment

  - by tore-

  Hi, Currently testing cobbler, but have problem with the kickstart script when the partition information is loaded. Here is my ks: http://pastebin.ca/1824343 I can't figure out what is the problem with the partsection at all. Without it, it works. I've even tried autopart. If the entry is removed, it works, but of course I have to provide the installer with partition information. Under the kickstart an python exception is raised. I get a Errno 2 No such file or directory. My Apache logs states: File does not exist: /var/www/cobbler/links/CentOS-5.3-x86_64/images/updates.img File does not exist: /var/www/cobbler/links/CentOS-5.3-x86_64/disc1 File does not exist: /var/www/cobbler/links/CentOS-5.3-x86_64/images/product.img But without the part information, no error occours. What am I not seeing? Cobbler 2.0.3, imported the CentOS 5.3 x86_64 DVD, PXE booting from a Xen guest.

  Read the article

• Why should I use cobbler over normal PXEBOOT server?

  - by luckytaxi

  Maybe it's me but I find it easier to manage my simple pxeboot server just by editing the default file under /tftpboot/pxelinux.cfg. I have my kickstart file available over NFS along with the DVD extracted to a centralize mount point. Other than PXEBOOT, what benefit would I get from running cobbler? It was confusing at first but I finally got the hang off it. The only benefit I see is being able to force a server to install an OS on demand. Anything else?

  Read the article

• Windows 7 MSDN version

  - by Larry Branham

  I recently purchased a copy of Windows 7 online. Upon trying to install, it stopped and I was told that it could not find a 64 bit driver for my CD/DVD and I could not finish install. I contacted Microsoft and was told that this was something called an MSDN version according to the product key and that was the reason for the problem. They also said is was illegal to sell it to me. The company I bought it from never returned my calls or emails and luckily I got money back through Amazon. Amazon didn't even want me to send it back. Anyway my question is, is there anyway to load this onto my system and will I have problems or should I just throw it out? Any help would be great. Thanks

  Read the article

< Previous Page | 60 61 62 63 64 65 66 67 68 69 70 71  | Next Page >