Search Results

Search found 3056 results on 123 pages for 'holiday fun'.

Page 64/123 | < Previous Page | 60 61 62 63 64 65 66 67 68 69 70 71  | Next Page >

  • Remove a Digital Camera’s IR Filter for IR Photography on the Cheap

    - by Jason Fitzpatrick
    Whether you have a DSLR or a point-and-shoot, this simple hack allows you to shoot awesome IR photographs without the expense of a high-quality IR filter (or the accompanying loss of light that comes with using it). How does it work? You’ll need to take apart your camera and remove a single fragile layer of IR blocking glass from the CCD inside the camera body. After doing so, you’ll have a camera that sees infrared light by default, no special add-on filters necessary. Because it sees the IR light without the filters you’ll also skip out on the light loss that occurs with the addition of the add-on IR filter. The downside? You’re altering the camera in permanent and warranty-voiding way. This is most definitely not a hack for your brand new $2,000 DSLR, but it is a really fun hack to try out on an old point and shoot camera or your circa-2004 depreciated DSLR. Hit up the link below to see the process performed on an old Canon point and shoot–we’d strongly recommend searching for a break down guide for your specific camera model before attempting the trick on your own gear. Are You Brave Enough to IR-ize Your Camera [DIY Photography] HTG Explains: How Windows Uses The Task Scheduler for System Tasks HTG Explains: Why Do Hard Drives Show the Wrong Capacity in Windows? Java is Insecure and Awful, It’s Time to Disable It, and Here’s How

    Read the article

  • The HTG Guide to Using a Bluetooth Keyboard with Your Android Device

    - by Matt Klein
    Android devices aren’t usually associated with physical keyboards. But, since Google is now bundling their QuickOffice app with the newly-released Kit-Kat, it appears inevitable that at least some Android tablets (particularly 10-inch models) will take on more productivity roles. In recent years, physical keyboards have been rendered obsolete by swipe style input methods such as Swype and Google Keyboard. Physical keyboards tend to make phones thick and plump, and that won’t fly today when thin (and even flexible and curved) is in vogue. So, you’ll be hard-pressed to find smartphone manufacturers launching new models with physical keyboards, thus rendering sliders to a past chapter in mobile phone evolution. It makes sense to ditch the clunky keyboard phone in favor of a lighter, thinner model. You’re going to carry around in your pocket or purse all day, why have that extra bulk and weight? That said, there is sound logic behind pairing tablets with keyboards. Microsoft continues to plod forward with its Surface models, and while critics continue to lavish praise on the iPad, its functionality is obviously enhanced and extended when you add a physical keyboard. Apple even has an entire page devoted specifically to iPad-compatible keyboards. But an Android tablet and a keyboard? Does such a thing even exist? They do actually. There are docking keyboards and keyboard/case combinations, there’s the Asus Transformer family, Logitech markets a Windows 8 keyboard that speaks “Android”, and these are just to name a few. So we know that keyboard products that are designed to work with Android exist, but what about an everyday Bluetooth keyboard you might use with Windows or OS X? How-To Geek wanted look at how viable it is to use such a keyboard with Android. We conducted some research and examined some lists of Android keyboard shortcuts. Most of what we found was long outdated. Many of the shortcuts don’t even apply anymore, while others just didn’t work. Regardless, after a little experimentation and a dash of customization, it turns out using a keyboard with Android is kind of fun, and who knows, maybe it will catch on. Setting things up Setting up a Bluetooth keyboard with Android is very easy. First, you’ll need a Bluetooth keyboard and of course an Android device, preferably running version 4.1 (Jelly Bean) or higher. For our test, we paired a second-generation Google Nexus 7 running Android 4.3 with a Samsung Series 7 keyboard. In Android, enable Bluetooth if it isn’t already on. We’d like to note that if you don’t normally use Bluetooth accessories and peripherals with your Android device (or any device really), it’s best practice to leave Bluetooth off because, like GPS, it drains the device’s battery more quickly. To enable Bluetooth, simply go to “Settings” -> “Bluetooth” and tap the slider button to “On”. To set up the keyboard, make sure it is on and then tap “Bluetooth” in the Android settings. On the resulting screen, your Android device should automatically search for and hopefully find your keyboard. If you don’t get it right the first time, simply turn the keyboard on again and then tap “Search for Devices” to try again. If it still doesn’t work, make sure you have fresh batteries and the keyboard isn’t paired to another device. If it is, you will need to unpair it before it will work with your Android device (consult your keyboard manufacturer’s documentation or Google if you don’t know how to do this). When Android finds your keyboard, select it under “Available Devices” … … and you should be prompted to type in a code: If successful, you will see that device is now “Connected” and you’re ready to go. If you want to test things out, try pressing the “Windows” key (“Apple” or “Command”) + ESC, and you will be whisked to your Home screen. So, what can you do? Traditional Mac and Windows users know there’s usually a keyboard shortcut for just about everything (and if there isn’t, there’s all kinds of ways to remap keys to do a variety of commands, tasks, and functions). So where does Android fall in terms of baked-in keyboard commands? There answer to that is kind of enough, but not too much. There are definitely established combos you can use to get around, but they aren’t clear and there doesn’t appear to be any one authority on what they are. Still, there is enough keyboard functionality in Android to make it a viable option, if only for those times when you need to get something done (long e-mail or important document) and an on-screen keyboard simply won’t do. It’s important to remember that Android is, and likely always will be a touch-first interface. That said, it does make some concessions to physical keyboards. In other words, you can get around Android fairly well without having to lift your hands off the keys, but you will still have to tap the screen regularly, unless you add a mouse. For example, you can wake your device by tapping a key rather than pressing its power button. However, if your device is slide or pattern-locked, then you’ll have to use the touchscreen to unlock it – a password or PIN however, works seamlessly with a keyboard – other things like widgets and app controls and features, have to be tapped. You get the idea. Keyboard shortcuts and navigation As we said, baked-in keyboard shortcut combos aren’t necessarily abundant nor apparent. The one thing you can always do is search. Any time you want to Google something, start typing from the Home screen and the search screen will automatically open and begin displaying results. Other than that, here is what we were able to figure out: ESC = go back CTRL + ESC = menu CTRL + ALT + DEL = restart (no questions asked) ALT + SPACE = search page (say “OK Google” to voice search) ALT + TAB (ALT + SHIFT + TAB) = switch tasks Also, if you have designated volume function keys, those will probably work too. There’s also some dedicated app shortcuts like calculator, Gmail, and a few others: CMD + A = calculator CMD + C = contacts CMD + E = e-mail CMD + G = Gmail CMD + L = Calendar CMD + P = Play Music CMD + Y = YouTube Overall, it’s not a long comprehensive list and there’s no dedicated keyboard combos for the full array of Google’s products. Granted, it’s hard to imagine getting a lot of mileage out of a keyboard with Maps but with something like Keep, you could type out long, detailed lists on your tablet, and then view them on your smartphone when you go out shopping. You can also use the arrow keys to navigate your Home screen over shortcuts and open the app drawer. When something on the screen is selected, it will be highlighted in blue. Press “Enter” to open your selection. Additionally, if an app has its own set of shortcuts, e.g. Gmail has quite a few unique shortcuts to it, as does Chrome, some – though not many – will work in Android (not for YouTube though). Also, many “universal” shortcuts such as Copy (CTRL + C), Cut (CTRL + X), Paste (CTRL + V), and Select All (CTRL + A) work where needed – such as in instant messaging, e-mail, social media apps, etc. Creating custom application shortcuts What about custom shortcuts? When we were researching this article, we were under the impression that it was possible to assign keyboard combinations to specific apps, such as you could do on older Android versions such as Gingerbread. This no long seems to be the case and nowhere in “Settings” could we find a way to assign hotkey combos to any of our favorite, oft-used apps or functions. If you do want custom keyboard shortcuts, what can you do? Luckily, there’s an app on Google Play that allows you to, among other things, create custom app shortcuts. It is called External Keyboard Helper (EKH) and while there is a free demo version, the pay version is only a few bucks. We decided to give EKH a whirl and through a little experimentation and finally reading the developer’s how-to, we found we could map custom keyboard combos to just about anything. To do this, first open the application and you’ll see the main app screen. Don’t worry about choosing a custom layout or anything like that, you want to go straight to the “Advanced settings”: In the “Advanced settings” select “Application shortcuts” to continue: You can have up to 16 custom application shortcuts. We are going to create a custom shortcut to the Facebook app. We choose “A0”, and from the resulting list, Facebook. You can do this for any number of apps, services, and settings. As you can now see, the Facebook app has now been linked to application-zero (A0): Go back to the “Advanced settings” and choose “Customize keyboard mappings”: You will be prompted to create a custom keyboard layout so we choose “Custom 1”: When you choose to create a custom layout, you can do a great many more things with your keyboard. For example, many keyboards have predefined function (Fn) keys, which you can map to your tablet’s brightness controls, toggle WiFi on/off, and much more. A word of advice, the application automatically remaps certain keys when you create a custom layout. This might mess up some existing keyboard combos. If you simply want to add some functionality to your keyboard, you can go ahead and delete EKH’s default changes and start your custom layout from scratch. To create a new combo, select “Add new key mapping”: For our new shortcut, we are going to assign the Facebook app to open when we key in “ALT + F”. To do this, we press the “F” key while in the “Scancode” field and we see it returns a value of “33”. If we wanted to use a different key, we can press “Change” and scan another key’s numerical value. We now want to assign the “ALT” key to application “A0”, previously designated as the Facebook app. In the “AltGr” field, we enter “A0” and then “Save” our custom combo. And now we see our new application shortcut. Now, as long as we’re using our custom layout, every time we press “ALT + F”, the Facebook app will launch: External Keyboard Helper extends far beyond simple application shortcuts and if you are looking for deeper keyboard customization options, you should definitely check it out. Among other things, EKH also supports dozens of languages, allows you to quickly switch between layouts using a key or combo, add up to 16 custom text shortcuts, and much more! It can be had on Google Play for $2.53 for the full version, but you can try the demo version for free. More extensive documentation on how to use the app is also available. Android? Keyboard? Sure, why not? Unlike traditional desktop operating systems, you don’t need a physical keyboard and mouse to use a mobile operating system. You can buy an iPad or Nexus 10 or Galaxy Note, and never need another accessory or peripheral – they work as intended right out of the box. It’s even possible you can write the next great American novel on one these devices, though that might require a lot of practice and patience. That said, using a keyboard with Android is kind of fun. It’s not revelatory but it does elevate the experience. You don’t even need to add customizations (though they are nice) because there are enough existing keyboard shortcuts in Android to make it usable. Plus, when it comes to inputting text such as in an editor or terminal application, we fully advocate big, physical keyboards. Bottom line, if you’re looking for a way to enhance your Android tablet, give a keyboard a chance. Do you use your Android device for productivity? Is a physical keyboard an important part of your setup? Do you have any shortcuts that we missed? Sound off in the comments and let us know what you think.     

    Read the article

  • West Palm Beach .Net User Group Meeting - April 27th 2010 - Ted Neward - MVP & INETA Speaker

    - by Sam Abraham
    Ted Neward, MVP & INETA Speaker spoke to us at the West Palm Beach .Net User Group meeting at CompTec about Microsoft OSLO and DSLs on Tuesday April 27th 2010. Ted kept the audience well engaged throughout his presentation and shared his experience with DSLs in a humorous and fun setting. At the conclusion of the talk, we had our free raffle and concluded the evening with networking while enjoying the pizza and soda brought to us by Sherlock Technology (www.sherstaff.com) This meeting was also Vishal Shukla's last appearance at the West Palm Beach .Net User Group as he will be leaving for India in mid-May. Vishal has worked hard side-by-side with the Fladotnet leadership to run the West Palm Beach Group and will sure be missed by all of us. On behalf of the group, I would like to wish Vishal best of luck on his future endeavors and we are all looking forward to seeing him again soon. Thank you Ted for making such a long trip from Redmond to FL to share with us your expertise and knowledge of DSLs and thank you INETA for making this happen with your support of user groups. You can get in touch with Ted through his website (www.tedneward.com)

    Read the article

  • Techie Land Silly Questions

    - by GeekAgilistMercenary
    Ok, it is time for an off the cuff, random, oddball, just for fun blog entry.  Two questions for the readers in Internet Land. Question #1:  If you did not have to work, had a few dollars stashed away so that you could live comfortably and do whatever you wanted, what would you do?  Would you still code?  Would you still create?  What would you create?  Would you be able to stay idle? Question #2:  Based on whatever you did with your free time, what would you title yourself?  Chief Potato Masher, Pencil Pushing Writer o’ Stories, or Coffee Endeavorer o’ Tastiness? There are a million possibilities, I would love to know what you would call yourself, so please do leave a comment or three. I will have my answers later in the week.  So stay tuned and help me out with some comments.  You can bet it will include something along the lines of what I already do, but I'll keep it a secret until then.  : )  Feel free to check out the original entry here to leave a comment.

    Read the article

  • SQLAuthority News – Best SQLAuthority Posts of May

    - by pinaldave
    Month of May is always interesting and full of enthusiasm. Lots of good articles shared and lots of enthusiast communication on technology. This month we had 140 Character Cartoon Challenge Winner. We also had interesting conversation on what kind of lock WITH NOLOCK takes on objects as well. A quick tutorial on how to import CSV files into Database using SSIS started few other related questions. I also had fun time with community activities. I attended MVP Open Day. Vijay Raj also took awesome photos of my daughter – Shaivi. I have gain my faith back in Social Media and have created my Facebook Page, if you like SQLAuthority.com I request you to Like Facebook page as well. I am very active on twitter (@pinaldave) and answer lots of technical question if I am online during that time. During this month couple of old thing, I did learn by accident 1) Restart and Shutdown Remote Computer 2) SSMS has web browser. If you have made it till here – I suggest you to take participation in very interesting conversation here – Why SELECT * throws an error but SELECT COUNT(*) does not? Reference: Pinal Dave (http://blog.SQLAuthority.com) Filed under: About Me, Pinal Dave, PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, T SQL, Technology

    Read the article

  • Tips To Manage An Effectively Come Back To Work After A Long Vacation

    - by Gopinath
    Vacations are very relaxing – no need to reply to endless mails, no marathon meeting or conference calls. It’s all about fun during the vacation. The troubles begin as you near the end of vacation and plans to think about getting back to work. Once we are back to work after a long vacation there will be many things to worry – a pile of snail mails, hundreds of unread emails,  a flood of phone calls to answer and a stream of scheduled meetings. How to handle all the backlog and catch up quickly with the inflow of work? Here is a management tip from Harvard Business Review blog to get back to work the right way after a long vacation Block off your morning. Make sure you don’t have any meetings scheduled or big projects due. Then before you open your inbox, pause and think about your work priorities. As you make your way through emails and voicemails, focus on returning the messages that are connected to what matters most. Defer or delegate things that aren’t top priority. And remember it will probably take more than one day to get caught up, so be easy on yourself. Hope these tips lets you plan a right comeback to work after your vacation. cc Image credit: flickr/dfwcre8tive This article titled,Tips To Manage An Effectively Come Back To Work After A Long Vacation, was originally published at Tech Dreams. Grab our rss feed or fan us on Facebook to get updates from us.

    Read the article

  • Incorporating Sound in UPK 3.6.1

    - by [email protected]
    UPK 3.6.1 now offers developers the ability to easily record and edit sound from right within the UPK Developer. Sound can be recorded in either the concept pane or individual topic frames. A developer can record sound at the same time they're capturing a transaction or by adding sound after recording, on a frame-by-frame basis. The sound editor in UPK 3.6.1 allows developers to perform a variety of editing functions: play, insert sound or silence, delete, adjust amplification, and import or export sound files, just to name a few. Internally, Oracle Product Management is using this functionality to create "UPK-casts" for enablement purposes. We do this by capturing PowerPoint slides, then adding sound, allowing us to create our own recorded "webcasts". Because we develop these independently, we control the content and have more flexibility to edit the content as needed. Whether it's a change to a single frame or an entire topic, we can react quickly, providing our users with the most up-to-date information. And you don't need expensive equipment or a sound studio to achieve good sound quality. Depending on how your end users are accessing your content, a $35 head set can do the trick. Just be sure to follow the best practices for sound recording as outlined in the UPK documentation. Tip: we've found that we get the best results with sound consistency when we record all the sound for a topic at one sitting. UPK 3.6.1 is now available for download from Oracle E-Delivery. Upgrade today and have fun creating more robust, engaging content for your users! - Karen Rihs, Oracle UPK & Tutor Outbound Product Management

    Read the article

  • ZooZoo’s Are Back! Watch & Download ICC Cricket World Cup 2011 ZooZoo Ads

    - by Gopinath
    For the past couple of years VodaFone ZooZoo’s are integral part of major Cricket events. We have seen them as part of IPL 2 and IPL 3 and now as part of the on going ICC Cricket World Cup 2011 new ZooZoo ads are back on Televisions.  ZooZoos are adorable and they are my favourite videos to watch to relax. So here I’m going to post all the ZooZoo ads that are being aired on televisions as part of ICC Cricket World Cup 2011. If you love to keep the ZooZoo ads collections on you PC, you can click the download link next to each ad and save the videos. Downloads are available in FLV (for viewing on computers) and MP4 (for mobile phones) . Have Fun! Excited girl Zoozoo Interview [Download It] Pilot ZooZoo Interview [Download It] Angry Zoozoo Interview [Download It] Two ZooZoos Interview [Download It] This article titled,ZooZoo’s Are Back! Watch & Download ICC Cricket World Cup 2011 ZooZoo Ads, was originally published at Tech Dreams. Grab our rss feed or fan us on Facebook to get updates from us.

    Read the article

  • SQL SERVER – Online Session on What is New in Denali – Today Online

    - by pinaldave
    I will be presenting today on subject Inside of Next Generation SQL Server – Denali online at Zeollar.com. This sessions are really fun as they are online, downloadable, and 100% demo oriented. I will be using SQL Server ‘Denali’ CTP 1 to present on the subject of What is New in Denali. The webcast will start at 12:30 PM sharp and will end at 1 PM India Time. It will be 100% demo oriented and no slides. I will be covering following topics in the session. SQL SERVER – Denali Feature – Zoom Query Editor SQL SERVER – Denali – Improvement in Startup Options SQL SERVER – Denali – Clipboard Ring – CTRL+SHIFT+V SQL SERVER – Denali – Multi-Monitor SSMS Windows SQL SERVER – Denali – Executing Stored Procedure with Result Sets SQL SERVER – Performance Improvement with of Executing Stored Procedure with Result Sets in Denali SQL SERVER – ‘Denali’ – A Simple Example of Contained Databases SQL SERVER – Denali – ObjectID in Negative – Local TempTable has Negative ObjectID SQL SERVER – Server Side Paging in SQL Server Denali – A Better Alternative SQL SERVER – Server Side Paging in SQL Server Denali Performance Comparison SQL SERVER – Denali – SEQUENCE is not IDENTITY SQL SERVER – Denali – Introduction to SEQUENCE – Simple Example of SEQUENCE If time permits we will cover few more topics as well. The session will be recorded as well. My earlier session on the Topic of Best Practices Analyzer is also available to watch online here: SQL SERVER – Video – Best Practices Analyzer using Microsoft Baseline Configuration Analyzer Reference: Pinal Dave (http://blog.SQLAuthority.com) Filed under: Pinal Dave, PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, SQLServer, T SQL, Technology

    Read the article

  • SQLAuthority News – SQL Server Performance Series Hyderabad / Pune – Nov/Dec 2010

    - by pinaldave
    Just a quick note that SQL Server Performance Tuning and Optimizations Seminar series which I am offering at Hyderabad and Pune are almost all sold out. Read the details of the earlier successful seminar conducted at Colombo, Sri Lanka over here. Hyderabad Nov 27-28, 2010 (Last 3 Seats Left) Best Western Amrutha Castle 5-9-16, Opp. Secretriat, Saifabad, Khairatabad Hyderabad, Andhra Pradesh Pune Dec 04-05, 2010 (Last 6 Seats Left) Location TBA as we are looking for larger capacity room. I promise that this is going to be great fun as this sessions are very different then any usual sessions you have ever attended. This sessions are absolutely interactive and all the attendees will feel part of the event. As larger group are not convenient we are limited this seminars to very small group of people. This way attendees can go to instructors any time and feel connected. This 2-day seminar will cover the best of the best concepts and practices from popular courses offered by Solid Quality Mentors. Instead of learning theory only, the seminar focuses on providing real world experience by using demos and scenarios derived from customer engagements. The seminar is uniquely structured and well-thought-out. Sessions are discussion- based and are designed to be an interactive gateway between the instructor and the participants for an optimal learning experience. The seminar is intended to be immersion-based where participants will have plenty of opportunities to get deeply involved in the concepts presented by the instructor. Agenda of the event To join the seminars drop me an email. My email address is pinal “at” SQLAuthority.com and IndiaInfo “at” SolidQ.com. If you specify SQLAuthority.com in Title, you will avail special discount in overall rates on specified price. Yes, a sure 20% I promise. Reference: Pinal Dave (http://blog.SQLAuthority.com) Filed under: About Me, Pinal Dave, SQL, SQL Authority, SQL Performance, SQL Query, SQL Scripts, SQL Server, SQL Tips and Tricks, SQLAuthority News, T SQL, Technology

    Read the article

  • Firefox for NTLM secured sites

    - by Sarang
    Spent the last weekend fighting to get firefox to connect to a sharepoint portal hosting my homegrown TFS instance's TFS/WEB and team project portal from a friends' place. Firefox is THE favourite browser and I was hating to se it fail miserably with NTLM authentication. Fun part is it showed the login prompt accepted credentials and like a pestering young puppy came back for the same credentials. After banging my head and various "I don't know what I don't know" attempts I decided to play god and entered the firefox's advance config mode. And voila! there sits a nifty little option called network.automatic-ntlm-auth.trusted-uris. Assign your URI to it and you are through. No more shameface before those Chrome/Opera users. :). To enter FireFox's god mode, open a new tab and type about:config in the address bar. There is a search box which certainly comes handy shifting through hundreds of options. The root lies in firefox's default mechanism of not allowing NTLM passthrough authentication. Firefox defaults to digest credentials which are blatantly refused by a web app expecting NTLM which results in authentication failure and Firefox keeps asking for credentials over and over again. The steps listed above are same as adding a website to your trusted sites' list in Internet Explorer.

    Read the article

  • Watch Google’s I/O 2012 Developer Conference Live (Online) Starting June 27

    - by Asian Angel
    Google’s annual I/O conference begins on Wednesday this week and will be filled with exciting sessions about Android, Chrome, Google+, and more. To help you keep up with all the fun we have the links you need so that you can tune in with live streaming! Photo courtesy of Google I/O website. The keynote for Day 1 will begin at 9:30 a.m. PDT (U.S. time) and the keynote for the second day will begin at 10:00 a.m. PDT (U.S. time), so make sure to mark it on your schedule! Visit the blog post linked below for more details about signing up for Extended Events, the I/O mobile app, the liveblogging gadget, and more. SPECIAL NOTE: The Google blog post linked below was slightly ambiguous and listed both of the I/O URLs we have shown here, so make sure to keep a watch on both… How to Banish Duplicate Photos with VisiPic How to Make Your Laptop Choose a Wired Connection Instead of Wireless HTG Explains: What Is Two-Factor Authentication and Should I Be Using It?

    Read the article

  • More FlipBoard Magazines: Azure, XAML, ASP.NET MVC & Web API

    - by dwahlin
    In a previous post I introduced two new FlipBoard magazines that I put together including The AngularJS Magazine and The JavaScript & HTML5 Magazine. FlipBoard magazines provide a great way to keep content organized using a magazine-style format as opposed to trudging through multiple unorganized bookmarks or boring pages full of links. I think they’re really fun to read through as well. Based on feedback and the surprising popularity of the first two magazines I’ve decided to create some additional magazines on topics I like such as The Azure Magazine, The XAML Magazine and The ASP.NET MVC & Web API Magazine. Click on a cover below to get to the magazines using your browser. To subscribe to a given magazine you’ll need to create a FlipBoard account (not required to read the magazines though) which requires an iOS or Android device (the Windows Phone 8 app is coming soon they say). If you have a post or article that you think would be a good fit for any of the magazines please tweet the link to @DanWahlin and I’ll add it to my queue to review. I plan to be pretty strict about keeping articles “on topic” and focused.   The Azure Magazine   The XAML Magazine   The ASP.NET MVC & Web API Magazine   The AngularJS Magazine   The JavaScript & HTML5 Magazine

    Read the article

  • Writing a Book, and Moving my Blog

    - by Ben Nevarez
    I started blogging about SQL Server here at SQLblog back in July, 2009 and it was a lot of fun, I enjoyed it a lot. Then later, after a series of blog posts about the Query Optimizer, I was invited to write an entire book about that same topic. But after a few months I realized that it was going to be hard to continue both blogging and writing chapters for a book, this in addition to my regular day job, so I decided to stop blogging for a little while.   Now that I have finished the last chapter of the book and I am working on the final chapter reviews, I decided to start blogging again. This time I am moving my blog to   http://www.benjaminnevarez.com   Same as my previous posts I plan to write about my topics of interest, like the relational engine, and basically anything related to SQL Server. Hopefully you find my new blog interesting and useful.   Finally, I would like to thank Adam for allowing me to blog here. Share this post: email it! | bookmark it! | digg it! | reddit! | kick it! | live it!

    Read the article

  • NINE Questions with Michelle Juett

    - by NINEQuestions
    Michelle Juett is one of the more interesting people I know, even though we’ve never met face to face. She’s part artist, part techie and all cool. We “met” via my good buddy George Clingerman and have plotting to take over the world, errr… I mean “collaborating” ever since. If you happen to live in the Seattle area, you can catch her and her work at Sakura Con on April 2-4, 2010 and various other gamer and art cons throughout the year. You can also find her on Twitter as @Shelldragon. Now that you know a little bit, I’ll let her tell you the rest of the story in these NINE Questions: 1. Where are you from? I was born in Clearwater, Florida. I like to tell people I'm from the Bermuda Triangle, it just makes explaining myself so much easier. My family moved to Washington when I was 5 and I've been in the Pacific Northwest ever since. We like to QQ about the rain but we really love the green trees and clean water. 2. What do you do? I fight evil by moonlight and win love by daylight.. or something like that.  I’ve been in quality assurance for games during the day since January 2008 and an artist for life. I currently work in QA for a really awesome game company in Bellevue.  At home, I work on personal digital art, making game assets as well as other random freelance projects as they pop up. 3. How did you get to where you are now? I'm still not where I want to be but I'm getting closer. The biggest piece of advice I can give is to work hard and never settle for the minimum required. I tend to overwork myself but I've never regretted it. You can want something really bad but if you aren't willing to work for it, then you can't expect it to just happen. I've always drawn and had an unhealthy love for video games that I was told I’d grow out of.  I knew I would not ‘grow out’ of games and that real adults make them and I could too. After I graduated, in searching for jobs, I discovered game testing. I figured this would be a good way to get my foot in the door and start networking. I’ve worked with consoles, websites and now, PC games.  I stuck with my journey, although it has been a rocky one, daylighting as a tester and moonlighting as an artist. I'm still on that journey but I wouldn't have it any other way. Test has given me a perspective that is difficult, if not impossible, to obtain any other way. It gives an unconditional respect for other hard working testers and an insight into creative problem solving. 4. So video game testing probably sounds WAY cooler than the reality. What's it like? What's a given day for you? Game testers don't get a lot of respect because of their stigmas and the fact most people don't actually know what we do.  People hear about the opening and closing disc trays all day. Many places do treat their testers like numbers. It all depends on where you work and how awesome your company is. I've had to deal with a lot of bad work situations to get to a really good one. QA exists to ensure the game is as flawless and enjoyable as it can be by the time it has to leave the nest and go out into the world. This includes everything obvious: “can I beat the level and save the princess?” to the more obscure: ‘What happens when I lose internet connection while trying to save right before falling into a pit to my death while holding the jump key then my cat pulls out my memory card and hides it in her litter box?” On the dev side, for developers, testers can be very scary people. Especially when the test team is not in house and you can’t see each other’s faces.  I've seen both sides. We don't mean to hurt your feelings. We really DO love you and want your game to be the best it can be! It can be some serious tough love. 5. You are also an accomplished artist. Got any major projects right now you'd like to talk about? LOL, I don't know if I’d say I'm an accomplished artist just yet. I’m still a long way from where I want to be. I figure that’s what makes you grow though: the desire to never stop improving. I like QA but I want to be a full time artist. I was lucky enough to register for a table at Sakura Con in the 11 second window that the tables sold out. As such, I’ll be selling my wares in the Artist Alley April 2-4th. Part of preparing for this is actually making the art to be sold there. Anime is a fun pass time but I don’t draw a whole lot of it so I’m making up for lost time. As I seem to enjoy burying myself in work, I’m an art lead for a secret project that’s so secret I might be killed tonight for even mentioning it. I also take on various freelance projects and do what I can to help out indie games. I discovered the XNA community a year and a half ago and developed a love for Indies when I was writing a weekly newsletter on XBLA news. I’m a little late to the party but I find myself in a unique position where I am an artist and also have technical skills in games. While not programmer myself, I have a lot of game sense and experience. I hope to make some awesome happen. Lastly, I have an ongoing web comic Shell’s Angels) that tends to get neglected when I get busy. I still love drawing comics and keep a little book with me to sketch down ideas as they pop into my head. I may pick it back up again as a larger project sometime in the future. 6. Can you talk about any of the other freelance projects you're doing or are you sworn to secrecy on those too? We wouldn't want a team of game developer ninjas to take you out or anything. All my projects are currently 2d. I have personal projects such as the ongoing comic as well as a graphic novel I've been picking at here and there. My main focus until April is Sakura Con, Sakura Con, Sakura Con.  I see it as a great way to get exposure and convention experience. I found out I love conventions a couple years ago and I want to get more involved in them. 7. As an artist, what is your weapon of choice? What do you use to get most of your stuff done? I am a Photoshop Hero and I have the hoodie to prove it. (http://www.pennyarcademerch.com/pah090011.html) I've dabbled in other paint programs but I always gravitate back to Photoshop. She is my one true love. I'd like to learn programs like Flash or Anime Studio when I get a bit more time because of their animation abilities. I've worked on frame by frame animation forever but I would love to learn 2d rigging. Still, nothing can compare to a simple sketchpad and a pencil. I always have one on me in case I come across or think of something interesting and can't get to a computer. If the Courier ever comes to exist it will be an ideal weapon for me. 8. You did some videos too, depicting the art creation process. What was the motivation behind those? The creative process is just as important as the final product, if not more so.  I've always loved watching speed paint videos and wanted to try it out myself. Turns out it's a lot of work and time but it's definitely fun to go back and rewatch them. Art isn't always the end result and is more often the process itself. 9. Got any interesting tattoos? Designed any for yourself or other people? Not yet, but not for lack of desire. I've toiled over what and where for years. Last year, I finally decided the back of my shoulders would be the place. Like anything permanent, I want it to have meaning. I thought of somehow incorporating games but I couldn't find something I felt would stand the test of time even with all the classic sprite games. I'm very picky so we'll see if I can get something solid decided. Come see me at Sakura Con April 2 -4!!!

    Read the article

  • Streaming Netflix Media with My Wii

    - by Ben Griswold
    Late last year, I wrote about Streaming Media with my Sony Blu-ray Disc Player. I am still digging the Blu-ray player setup but guess what showed up in the mail yesterday?   That’s right!  A free Netflix disc which now let’s me instantly watch TV episodes and movies via my Wii console.  I popped the disc into the console and in less than 2 minutes the brain-numbingly simple activation was complete.  (Full-disclosure: I already had my Wi-Fi connection configured, but I’m confident that the Netflix installation disc would have helpfully walked me through this additional step if need be.) As it turns out, the Wii Netflix UI offers far more options than what one gets with the Blu-ray setup.  Not only can I view my Instant Queue, but there’s a list of recently watched movies, a list of recommended titles by category, the star rating system, movies information and nearly everything you find on the web.  I reread Steve Krug’s Don’t Make Me Think: A Common Sense Approach to Web Usability on a flight back from Orlando on Wednesday, so my current view of the world may be a little skewed but, the brilliance of Netflix Wii’s user interface is undeniable. It’s not like the Blu-ray navigation is complicated but the Wii navigation feels familiar and intuitive. How intuitive?  Well, you won’t find a single bit of help text on any of the Wii screens – just a simple and obvious point-and-click navigation system.  And the UI is really pretty (which is still very important if you ask me) and so easy it became fun. Did I mention the media streaming works!  Yep, we watched 2 half-hour kid videos yesterday without any streaming issues at all.  If you have a Netflix account and a Wii, order your disc and give it a go. It’s good stuff.

    Read the article

  • HTG Explains: What’s a Solid State Drive and What Do I Need to Know?

    - by Jason Fitzpatrick
    Solid State Drives (SSDs) are the lighting fast new kid on the hard drive block, but are they a good match for you? Read on as we demystify SSDs. The last few years have seen a marked increase in the availability of SSDs and a decrease in price (although it certainly may not feel that way when comparing prices between SSDs and traditional HDDs). What is an SSD? In what ways do you benefit the most from paying the premium for an SSD? What, if anything, do you need to do differently with an SSD? Read on as we cut through  the new-product-haze surrounding Solid State Drives. Latest Features How-To Geek ETC How to Get Amazing Color from Photos in Photoshop, GIMP, and Paint.NET Learn To Adjust Contrast Like a Pro in Photoshop, GIMP, and Paint.NET Have You Ever Wondered How Your Operating System Got Its Name? Should You Delete Windows 7 Service Pack Backup Files to Save Space? What Can Super Mario Teach Us About Graphics Technology? Windows 7 Service Pack 1 is Released: But Should You Install It? Save Files Directly from Your Browser to the Cloud in Chrome and Iron The Steve Jobs Chronicles – Charlie and the Apple Factory [Video] Google Chrome Updates; Faster, Cleaner Menus, Encrypted Password Syncing, and More Glowing Chess Set Combines LEDs, Chess, and DIY Electronics Fun Peaceful Alpine River on a Sunny Day [Wallpaper] Fast Society Creates Mini and Mobile Temporary Social Networks

    Read the article

  • Quotas - Using quotas on ZFSSA shares and projects and users

    - by Steve Tunstall
    So you don't want your users to fill up your entire storage pool with their MP3 files, right? Good idea to make some quotas. There's some good tips and tricks here, including a helpful workflow (a script) that will allow you to set a default quota on all of the users of a share at once. Let's start with some basics. I mad a project called "small" and inside it I made a share called "Share1". You can set quotas on the project level, which will affect all of the shares in it, or you can do it on the share level like I am here. Go the the share's General property page. First, I'm using a Windows client, so I need to make sure I have my SMB mountpoint. Do you know this trick yet? Go to the Protocol page of the share. See the SMB section? It needs a resource name to make the UNC path for the SMB (Windows) users. You do NOT have to type this name in for every share you make! Do this at the Project level. Before you make any shares, go to the Protocol properties of the Project, and set the SMB Resource name to "On". This special code will automatically make the SMB resource name of every share in the project the same as the share name. Note the UNC path name I got below. Since I did this at the Project level, I didn't have to lift a finger for it to work on every share I make in this project. Simple. So I have now mapped my Windows "Z:" drive to this Share1. I logged in as the user "Joe". Note that my computer shows my Z: drive as 34GB, which is the entire size of my Pool that this share is in. Right now, Joe could fill this drive up and it would fill up my pool.  Now, go back to the General properties of Share1. In the "Space Usage" area, over on the right, click on the "Show All" text under the Users & Groups section. Sure enough, Joe and some other users are in here and have some data. Note this is also a handy window to use just to see how much space your users are using in any given share.  Ok, Joe owes us money from lunch last week, so we want to give him a quota of 100MB. Type his name in the Users box. Notice how it now shows you how much data he's currently using. Go ahead and give him a 100M quota and hit the Apply button. If I go back to "Show All", I can see that Joe now has a quota, and no one else does. Sure enough, as soon as I refresh my screen back on Joe's client, he sees that his Z: drive is now only 100MB, and he's more than half way full.  That was easy enough, but what if you wanted to make the whole share have a quota, so that the share itself, no matter who uses it, can only grow to a certain size? That's even easier. Just use the Quota box on the left hand side. Here, I use a Quota on the share of 300MB.  So now I log off as Joe, and log in as Steve. Even though Steve does NOT have a quota, it is showing my Z: drive as 300MB. This would effect anyone, INCLUDING the ROOT user, becuase you specified the Quota to be on the SHARE, not on a person.  Note that back in the Share, if you click the "Show All" text, the window does NOT show Steve, or anyone else, to have a quota of 300MB. Yet we do, because it's on the share itself, not on any user, so this panel does not see that. Ok, here is where it gets FUN.... Let's say you do NOT want a quota on the SHARE, because you want SOME people, like Root and yourself, to have FULL access to it and you want the ability to fill the whole thing up if you darn well feel like it. HOWEVER, you want to give the other users a quota. HOWEVER you have, say, 200 users, and you do NOT feel like typing in each of their names and giving them each a quota, and they are not all members of a AD global group you could use or anything like that.  Hmmmmmm.... No worries, mate. We have a handy-dandy script that can do this for us. Now, this script was written a few years back by Tim Graves, one of our ZFSSA engineers out of the UK. This is not my script. It is NOT supported by Oracle support in any way. It does work fine with the 2011.1.4 code as best as I can tell, but Oracle, and I, are NOT responsible for ANYTHING that you do with this script. Furthermore, I will NOT give you this script, so do not ask me for it. You need to get this from your local Oracle storage SC. I will give it to them. I want this only going to my fellow SCs, who can then work with you to have it and show you how it works.  Here's what it does...Once you add this workflow to the Maintenance-->Workflows section, you click it once to run it. Nothing seems to happen at this point, but something did.   Go back to any share or project. You will see that you now have four new, custom properties on the bottom.  Do NOT touch the bottom two properties, EVER. Only touch the top two. Here, I'm going to give my users a default quota of about 40MB each. The beauty of this script is that it will only effect users that do NOT already have any kind of personal quota. It will only change people who have no quota at all. It does not effect the Root user.  After I hit Apply on the Share screen. Nothing will happen until I go back and run the script again. The first time you run it, it creates the custom properties. The second and all subsequent times you run it, it checks the shares for any users, and applies your quota number to each one of them, UNLESS they already have one set. Notice in the readout below how it did NOT apply to my Joe user, since Joe had a quota set.  Sure enough, when I go back to the "Show All" in the share properties, all of the users who did not have a quota, now have one for 39.1MB. Hmmm... I did my math wrong, didn't I?    That's OK, I'll just change the number of the Custom Default quota again. Here, I am adding a zero on the end.  After I click Apply, and then run the script again, all of my users, except Joe, now have a quota of 391MB  You can customize a person at any time. Here, I took the Steve user, and specifically gave him a Quota of zero. Now when I run the script again, he is different from the rest, so he is no longer effected by the script. Under Show All, I see that Joe is at 100, and Steve has no Quota at all. I can do this all day long. es, you will have to re-run the script every time new users get added. The script only applies the default quota to users that are present at the time the script is ran. However, it would be a simple thing to schedule the script to run each night, or to make an alert to run the script when certain events occur.  For you power users, if you ever want to delete these custom properties and remove the script completely, you will find these properties under the "Schema" section under the Shares section. You can remove them here. There's no need to, however, they don't hurt a thing if you just don't use them.  I hope these tips have helped you out there. Quotas can be fun

    Read the article

  • Microsoft Silverlight MVP one more time

    - by pluginbaby
    Another wonderful first email of the year… announcing that I’ve just been re-awarded Most Valuable Professional (MVP) by Microsoft for Silverlight. This is my 5th year as an MVP in a row and I am still very honoured and excited! In 2010 I had the pleasure to be involved in many community events around Silverlight, speaking at Microsoft conferences and user groups (doing the launch of the Vancouver Silverlight User Group was fun!), as well as taking part in worldwide conference like MIX Las Vegas and the MVP Summit in Redmond. Also I did new kind of activities in 2010: I wrote questions for the first Microsoft Silverlight certification exam (70-506), and I was Technical reviewer of 3 Silverlight books. I finally started to share more on Twitter @LaurentDuveau. In 2010 the content of this blog was mostly about Silverlight, I expect it to be the same in 2011, plus a touch of Windows Phone as well. I already know that 2011 will be hell of a good year.. I’ll be at the next MVP Summit in Seattle, also speaker at DevTeach which comes back to Montreal (at last!) and have some nice Silverlight trainings plans for France and Tunisia. More than that, my business RunAtServer is healthy (proud of my team!) and I have insane news and a very big surprise coming on that front.... stay tuned! Happy New Year!

    Read the article

  • SQL SERVER – Concurrency Basics – Guest Post by Vinod Kumar

    - by pinaldave
    This guest post is by Vinod Kumar. Vinod Kumar has worked with SQL Server extensively since joining the industry over a decade ago. Working on various versions from SQL Server 7.0, Oracle 7.3 and other database technologies – he now works with the Microsoft Technology Center (MTC) as a Technology Architect. Let us read the blog post in Vinod’s own voice. Learning is always fun when it comes to SQL Server and learning the basics again can be more fun. I did write about Transaction Logs and recovery over my blogs and the concept of simplifying the basics is a challenge. In the real world we always see checks and queues for a process – say railway reservation, banks, customer supports etc there is a process of line and queue to facilitate everyone. Shorter the queue higher is the efficiency of system (a.k.a higher is the concurrency). Every database does implement this using checks like locking, blocking mechanisms and they implement the standards in a way to facilitate higher concurrency. In this post, let us talk about the topic of Concurrency and what are the various aspects that one needs to know about concurrency inside SQL Server. Let us learn the concepts as one-liners: Concurrency can be defined as the ability of multiple processes to access or change shared data at the same time. The greater the number of concurrent user processes that can be active without interfering with each other, the greater the concurrency of the database system. Concurrency is reduced when a process that is changing data prevents other processes from reading that data or when a process that is reading data prevents other processes from changing that data. Concurrency is also affected when multiple processes are attempting to change the same data simultaneously. Two approaches to managing concurrent data access: Optimistic Concurrency Model Pessimistic Concurrency Model Concurrency Models Pessimistic Concurrency Default behavior: acquire locks to block access to data that another process is using. Assumes that enough data modification operations are in the system that any given read operation is likely affected by a data modification made by another user (assumes conflicts will occur). Avoids conflicts by acquiring a lock on data being read so no other processes can modify that data. Also acquires locks on data being modified so no other processes can access the data for either reading or modifying. Readers block writer, writers block readers and writers. Optimistic Concurrency Assumes that there are sufficiently few conflicting data modification operations in the system that any single transaction is unlikely to modify data that another transaction is modifying. Default behavior of optimistic concurrency is to use row versioning to allow data readers to see the state of the data before the modification occurs. Older versions of the data are saved so a process reading data can see the data as it was when the process started reading and not affected by any changes being made to that data. Processes modifying the data is unaffected by processes reading the data because the reader is accessing a saved version of the data rows. Readers do not block writers and writers do not block readers, but, writers can and will block writers. Transaction Processing A transaction is the basic unit of work in SQL Server. Transaction consists of SQL commands that read and update the database but the update is not considered final until a COMMIT command is issued (at least for an explicit transaction: marked with a BEGIN TRAN and the end is marked by a COMMIT TRAN or ROLLBACK TRAN). Transactions must exhibit all the ACID properties of a transaction. ACID Properties Transaction processing must guarantee the consistency and recoverability of SQL Server databases. Ensures all transactions are performed as a single unit of work regardless of hardware or system failure. A – Atomicity C – Consistency I – Isolation D- Durability Atomicity: Each transaction is treated as all or nothing – it either commits or aborts. Consistency: ensures that a transaction won’t allow the system to arrive at an incorrect logical state – the data must always be logically correct.  Consistency is honored even in the event of a system failure. Isolation: separates concurrent transactions from the updates of other incomplete transactions. SQL Server accomplishes isolation among transactions by locking data or creating row versions. Durability: After a transaction commits, the durability property ensures that the effects of the transaction persist even if a system failure occurs. If a system failure occurs while a transaction is in progress, the transaction is completely undone, leaving no partial effects on data. Transaction Dependencies In addition to supporting all four ACID properties, a transaction might exhibit few other behaviors (known as dependency problems or consistency problems). Lost Updates: Occur when two processes read the same data and both manipulate the data, changing its value and then both try to update the original data to the new value. The second process might overwrite the first update completely. Dirty Reads: Occurs when a process reads uncommitted data. If one process has changed data but not yet committed the change, another process reading the data will read it in an inconsistent state. Non-repeatable Reads: A read is non-repeatable if a process might get different values when reading the same data in two reads within the same transaction. This can happen when another process changes the data in between the reads that the first process is doing. Phantoms: Occurs when membership in a set changes. It occurs if two SELECT operations using the same predicate in the same transaction return a different number of rows. Isolation Levels SQL Server supports 5 isolation levels that control the behavior of read operations. Read Uncommitted All behaviors except for lost updates are possible. Implemented by allowing the read operations to not take any locks, and because of this, it won’t be blocked by conflicting locks acquired by other processes. The process can read data that another process has modified but not yet committed. When using the read uncommitted isolation level and scanning an entire table, SQL Server can decide to do an allocation order scan (in page-number order) instead of a logical order scan (following page pointers). If another process doing concurrent operations changes data and move rows to a new location in the table, the allocation order scan can end up reading the same row twice. Also can happen if you have read a row before it is updated and then an update moves the row to a higher page number than your scan encounters later. Performing an allocation order scan under Read Uncommitted can cause you to miss a row completely – can happen when a row on a high page number that hasn’t been read yet is updated and moved to a lower page number that has already been read. Read Committed Two varieties of read committed isolation: optimistic and pessimistic (default). Ensures that a read never reads data that another application hasn’t committed. If another transaction is updating data and has exclusive locks on data, your transaction will have to wait for the locks to be released. Your transaction must put share locks on data that are visited, which means that data might be unavailable for others to use. A share lock doesn’t prevent others from reading but prevents them from updating. Read committed (snapshot) ensures that an operation never reads uncommitted data, but not by forcing other processes to wait. SQL Server generates a version of the changed row with its previous committed values. Data being changed is still locked but other processes can see the previous versions of the data as it was before the update operation began. Repeatable Read This is a Pessimistic isolation level. Ensures that if a transaction revisits data or a query is reissued the data doesn’t change. That is, issuing the same query twice within a transaction cannot pickup any changes to data values made by another user’s transaction because no changes can be made by other transactions. However, this does allow phantom rows to appear. Preventing non-repeatable read is a desirable safeguard but cost is that all shared locks in a transaction must be held until the completion of the transaction. Snapshot Snapshot Isolation (SI) is an optimistic isolation level. Allows for processes to read older versions of committed data if the current version is locked. Difference between snapshot and read committed has to do with how old the older versions have to be. It’s possible to have two transactions executing simultaneously that give us a result that is not possible in any serial execution. Serializable This is the strongest of the pessimistic isolation level. Adds to repeatable read isolation level by ensuring that if a query is reissued rows were not added in the interim, i.e, phantoms do not appear. Preventing phantoms is another desirable safeguard, but cost of this extra safeguard is similar to that of repeatable read – all shared locks in a transaction must be held until the transaction completes. In addition serializable isolation level requires that you lock data that has been read but also data that doesn’t exist. Ex: if a SELECT returned no rows, you want it to return no. rows when the query is reissued. This is implemented in SQL Server by a special kind of lock called the key-range lock. Key-range locks require that there be an index on the column that defines the range of values. If there is no index on the column, serializable isolation requires a table lock. Gets its name from the fact that running multiple serializable transactions at the same time is equivalent of running them one at a time. Now that we understand the basics of what concurrency is, the subsequent blog posts will try to bring out the basics around locking, blocking, deadlocks because they are the fundamental blocks that make concurrency possible. Now if you are with me – let us continue learning for SQL Server Locking Basics. Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: PostADay, SQL, SQL Authority, SQL Performance, SQL Query, SQL Server, SQL Tips and Tricks, T SQL, Technology Tagged: Concurrency

    Read the article

  • SQL SERVER – Puzzle to Win Print Book – Write T-SQL Self Join Without Using FIRST _VALUE and LAST_VALUE

    - by pinaldave
    Last week we asked a puzzle SQL SERVER – Puzzle to Win Print Book – Functions FIRST_VALUE and LAST_VALUE with OVER clause and ORDER BY . This puzzle got very interesting participation. The details of the winner is listed here. In this puzzle we received two very important feedback. This puzzle cleared the concepts of First_Value and Last_Value to the participants. As this was based on SQL Server 2012 many could not participate it as they have yet not installed SQL Server 2012. I really appreciate the feedback of user and decided to come up something as fun and helps learn new feature of SQL Server 2012. Please read yesterday’s blog post SQL SERVER – Introduction to LEAD and LAG – Analytic Functions Introduced in SQL Server 2012 before continuing this puzzle as it is based on yesterday’s post. Yesterday I ran following query which uses functions LEAD and LAG. USE AdventureWorks GO SELECT s.SalesOrderID,s.SalesOrderDetailID,s.OrderQty, FIRST_VALUE(SalesOrderDetailID) OVER (ORDER BY SalesOrderDetailID) FstValue, LAST_VALUE(SalesOrderDetailID) OVER (ORDER BY SalesOrderDetailID) LstValue FROM Sales.SalesOrderDetail s WHERE SalesOrderID IN (43670, 43669, 43667, 43663) ORDER BY s.SalesOrderID,s.SalesOrderDetailID,s.OrderQty GO The above query will give us the following result: Puzzle: Now use T-SQL Self Join where same table is joined to itself and get the same result without using LEAD or LAG functions. Hint: Introduction to JOINs – Basic of JOINs Self Join A new analytic functions in SQL Server Denali CTP3 – LEAD() and LAG() Rules Leave a comment with your detailed answer by Nov 21's blog post. Open world-wide (where Amazon ships books) If you blog about puzzle’s solution and if you win, you win additional surprise gift as well. Prizes Print copy of my new book SQL Server Interview Questions Amazon|Flipkart If you already have this book, you can opt for any of my other books SQL Wait Stats [Amazon|Flipkart|Kindle] and SQL Programming [Amazon|Flipkart|Kindle]. Reference: Pinal Dave (http://blog.SQLAuthority.com) Filed under: Pinal Dave, PostADay, SQL, SQL Authority, SQL Function, SQL Query, SQL Scripts, SQL Server, SQL Tips and Tricks, T SQL, Technology

    Read the article

  • Quick guide to Oracle IRM 11g: Server installation

    - by Simon Thorpe
    Quick guide to Oracle IRM 11g index This is the first of a set of articles designed to assist with the successful installation, configuration and deployment of a document security solution using Oracle IRM. This article goes through a set of simple instructions which detail how to download, install and configure the IRM server, the starting point for building a document security solution. This article contains a subset of information from the official documentation and is focused on installing the server on Oracle Enterprise Linux. If you are planning to deploy on a non-Linux platform, you will need to reference the documentation for platform specific information. Contents Introduction Downloading the software Preparing a database Creating the schema WebLogic Server installation Installing Oracle IRM Introduction Because we are using Oracle Enterprise Linux in this guide, and before we get into the detail of IRM, i'd like to share some tips with Linux to make life a bit easier.Use a 64bit platform, IRM 11g runs just fine on a 32bit server but with 64bit you will build a more future proof service. Download and install the latest Java JDK package. Make sure you get the 64bit version if you are on a 64bit server. Configure Linux to use a good Yum server to simplify installing packages. For Oracle Enterprise Linux we maintain a great public Yum here. Have at least 20GB of free disk space on the partition you intend to install the IRM server. The downloads are big, then you extract them and then install. This quickly consumes disk space which you can easily recover by deleting the downloaded and extracted files after wards. But it's nice to have the disk space spare to keep these around in case you need to restart any part of the installation process again. Downloading the software OK, so before you can do anything, you need the software install kits. Luckily Oracle allows you to freely download every technology we create. You'll need to get the following; Oracle WebLogic Server Oracle Database Oracle Repository Creation Utility (rcu) Oracle IRM server You can use Microsoft SQL server 2005 or 2008, in this guide i've used Oracle RDBMS 11gR2 for Linux. Preparing the database I'm not going to go through the finer points of installing the database. There are many very good guides on installing the Oracle Database. However one thing I would suggest you think about is enabling TDE, network encryption and using Database Vault. These Oracle database security technologies are excellent for creating a complete end to end security solution. No point in going to all the effort to secure document access with IRM when someone can go directly to the database and assign themselves rights to documents. To understand this further, you can see a video of the IRM service using these database security technologies here. With a database up and running we need to create a schema to hold the IRM data. This schema contains the rights model, cryptographic keys, user account id's and associated rights etc. Creating the IRM database schema Oracle uses the Repository Creation Tool which builds your schema, extract the files from the rcu zip. Then in a terminal window; cd /oracle/install/rcu/bin ./rcu This will launch the Repository Creation Tool and you will be presented with the image to the right. Hit next and continue onto the next dialog. You are asked if you are going to be creating a new schema or wish to drop an existing one, you obviously just need to click next at this point to create a new schema. The RCU next needs to know where your database is so you'll need the following details of your database instance. Below, for reference, is the information for my installation. Hostname: irm.oracle.demo Port: 1521 (This is the default TCP port for the Oracle Database) Service Name: irm.oracle.demo. Note this is not the SID, but the service name. Username: sys Password: ******** Role: SYSDBA And then select next. Because the RCU contains schemas for many of the Oracle Technologies, you now need to select to just deploy the Oracle IRM schema. Open the section under "Enterprise Content Management" and tick the "Oracle Information Rights Management" component. Note that you also get the chance to select a prefix which defaults to "DEV" (for development). I usually change this to something that reflects my own install. PROD for a production system, INT for internal only etc. The next step asks for the passwords for the schema users. We are only creating one schema here so you just enter one password. Some brave souls store this password in an Excel spreadsheet which is then secure against the IRM server you're about to install in this guide. Nearing the end of the schema creation is the mapping of the tablespaces to the schema. Note I had setup a table space already that was encrypted using TDE and at this point I was able to select that tablespace by clicking in the "Default Tablespace" column. The next dialog confirms your actions and clicking on next causes it to create the schema and default data. After this you are presented with the completion summary. WebLogic Server installation The database is now ready and the next step is to install the application server. Oracle IRM 11g is a JEE application and currently only supported in Oracle WebLogic Server. So the next step is get WebLogic Server installed, which is pretty easy. Depending on the version you download, you either run the binary or for a 64 bit platform (like mine) run the following command. java -d64 -jar wls1033_generic.jar And in the resulting dialog hit next to start walking through the install. Next choose a directory into which you will install WebLogic Server. I like to change from the default and install into /oracle/. Then all my software goes into this one folder, all owned by the "oracle" user. The next dialog asks for your Oracle support information to ensure you are kept up to date. If you have an Oracle support account, enter your details but for most evaluation systems I leave these fields blank. Again, for evaluation or development systems, I usually stick with the "Typical" install type which you are next asked for. Next you are asked for the JDK which will be used for the server. When installing from the generic jar on a 64bit platform like in this guide, no JDK is bundled with the installer. But as you can see in the image on the right, that it does a good job of detecting the one you've got installed. Defaults for the install directories are usually taken, no changes here, just click next. And finally we are ready to install, hit next, sit back and relax. Typically this takes about 10 minutes. After the install, do not run the quick start, we need to deploy the IRM install itself from which we will create a new WebLogic domain. For now just hit done and lets move to the final step of the installation process. Installing Oracle IRM The last piece of the puzzle to getting your environment ready is to deploy the IRM files themselves. Unzip the Oracle Enterprise Content Management 11g zip file and it will create a Disk1 directory. Switch to this folder and in the console run ./runInstaller. This will launch the installer which will also ask for the location of the JDK. Look at the image on the right for the detail. You should now see the first stage of the IRM installation. The dialog warns you need to have a WebLogic server installed and have created the schema's, but you've just done all that above (I hope) so we are ready to go. The installer now checks that you have all the required libraries installed and other system parameters are correct. Because nearly all of my development and evaluation installations have the database server on the same system, the installer passes these checks without issue... Next... Now chose where to install the IRM files, you must install into the same Middleware Home as the WebLogic Server installation you just performed. Usually the installer already defaults to this location anyway. I also tend to change the Oracle Home Directory to Oracle_IRM so it's clear this is just an IRM install. The summary page tells you about space needed to deploy the files. Unfortunately the IRM install comes with all of the other Oracle ECM software, you can't just select the IRM files, everything gets deployed to disk and uses 1.6GB of space! Not fun, but Oracle has to package up similar technologies otherwise we would have a very large number of installers to QA and manage, again, not fun. Hit Install, time for another drink, maybe a piece of cake or a donut... on a half decent system this part of the install took under 10 minutes. Finally the installation of your IRM server is complete, click on finish and the next phase is to create the WebLogic domain and start configuring your server. Now move onto the next article in this guide... configuring your IRM server ready to seal your first document.

    Read the article

  • F# and ArcObjects, Part 2

    - by Marko Apfel
    After accessing one feature now iterating through all features of a feature class: open System;; #I "C:\Program Files\ArcGIS\DotNet";; #r "ESRI.ArcGIS.System.dll";; #r "ESRI.ArcGIS.DataSourcesGDB.dll";; #r "ESRI.ArcGIS.Geodatabase.dll";; open ESRI.ArcGIS.esriSystem;; open ESRI.ArcGIS.DataSourcesGDB;; open ESRI.ArcGIS.Geodatabase;; let aoInitialize = new AoInitializeClass();; let status = aoInitialize.Initialize(esriLicenseProductCode.esriLicenseProductCodeArcEditor);; let workspacefactory = new SdeWorkspaceFactoryClass();; let connection = "SERVER=okul;DATABASE=p;VERSION=sde.default;INSTANCE=sde:sqlserver:okul;USER=s;PASSWORD=g";; let workspace = workspacefactory.OpenFromString(connection, 0);; let featureWorkspace = (box workspace) :?> IFeatureWorkspace;; let featureClass = featureWorkspace.OpenFeatureClass("Praxair.SFG.BP_L_ROHR");; let queryFilter = new QueryFilterClass();; let featureCursor = featureClass.Search(queryFilter, true);; let featureCursorSeq (featureCursor : IFeatureCursor) = let actualFeature = ref (featureCursor.NextFeature()) seq { while (!actualFeature) <> null do yield actualFeature do actualFeature := featureCursor.NextFeature() };; featureCursorSeq featureCursor |> Seq.iter (fun feature -> Console.WriteLine ((!feature).OID));;

    Read the article

  • PASS Summit Feedback

    - by Rob Farley
    PASS Feedback came in last week. I also saw my dentist for some fillings... At the PASS Summit this year, I delivered a couple of regular sessions and a Lightning Talk. People told me they enjoyed it, but when the rankings came out, they showed that I didn’t score particularly well. Brent Ozar was keen to discuss it with me. Brent: PASS speaker feedback is out. You did two sessions and a Lightning Talk. How did you go? Rob: Not so well actually, thanks for asking. Brent: Ha! Sorry. Of course you know that's why I wanted to discuss this with you. I was in one of your sessions at SQLBits in the UK a month before PASS, and I thought you rocked. You've got a really good and distinctive delivery style.  Then I noticed your talks were ranked in the bottom quarter of the Summit ratings and wanted to discuss it. Rob: Yeah, I know. You did ask me if we could do this...  I should explain – my presentation style is not the stereotypical IT conference one. I throw in jokes, and try to engage the audience thoroughly. I find many talks amazingly dry, and I guess I try to buck that trend. I also run training courses, and find that I get a lot of feedback from people thanking me for keeping things interesting. That said, I also get feedback criticising me for my style, and that’s basically what’s happened here. For the rest of this discussion, let’s focus on my talk about the Incredible Shrinking Execution Plan, which I considered to be my main talk. Brent: I thought that session title was the very best one at the entire Summit, and I had it on my recommended sessions list.  In four words, you managed to sum up the topic and your sense of humor.  I read that and immediately thought, "People need to be in this session," and then it didn't score well.  Tell me about your scores. Rob: The questions on the feedback form covered the usefulness of the information, the speaker’s presentation skills, their knowledge of the subject, how well the session was described, the amount of time allocated, and the quality of the presentation materials. Brent: Presentation materials? But you don’t do slides.  Did they rate your thong? Rob: No-one saw my flip-flops in this talk, Brent. I created a script in Management Studio, and published that afterwards, but I think people will have scored that question based on the lack of slides. I wasn’t expecting to do particularly well on that one. That was the only section that didn’t have 5/5 as the most popular score. Brent: See, that sucks, because cookbook-style scripts are often some of my favorites.  Adam Machanic's Service Broker workbench series helped me immensely when I was prepping for the MCM.  As an attendee, I'd rather have a commented script than a slide deck.  So how did you rank so low? Rob: When I look at the scores that you got (based on your blog post), you got very few scores below 3 – people that felt strong enough about your talk to post a negative score. In my scores, between 5% and 10% were below 3 (except on the question about whether I knew my stuff – I guess I came as knowledgeable). Brent: Wow – so quite a few people really didn’t like your talk then? Rob: Yeah. Mind you, based on the comments, some people really loved it. I’d like to think that there would be a certain portion of the room who may have rated the talk as one of the best of the conference. Some of my comments included “amazing!”, “Best presentation so far!”, “Wow, best session yet”, “fantastic” and “Outstanding!”. I think lots of talks can be “Great”, but not so many talks can be “Outstanding” without the word losing its meaning. One wrote “Pretty amazing presentation, considering it was completely extemporaneous.” Brent: Extemporaneous, eh? Rob: Yeah. I guess they don’t realise how much preparation goes into coming across as unprepared. In many ways it’s much easier to give a written speech than to deliver a presentation without slides as a prompt. Brent: That delivery style, the really relaxed, casual, college-professor approach was one of the things I really liked about your presentation at SQLbits.  As somebody who presents a lot, I "get" it - I know how hard it is to come off as relaxed and comfortable with your own material.  It's like improv done by jazz players and comedians - if you've never tried it, you don't realize how hard it is.  People also don't realize how hard it is to make a tough subject fun. Rob: Yeah well... There will be people writing comments on this post that say I wasn't trying to make the subject fun, and that I was making it all about me. Sometimes the style works, sometimes it doesn't. Most of the comments mentioned the fact that I tell jokes, some in a nice way, but some not so much (and it wasn't just a PASS thing - that's the mix of feedback I generally get). One comment at PASS was: “great stand up comedian - not what I'm looking for at pass”, and there were certainly a few that said “too many jokes”. I’m not trying to do stand-up – jokes are my way of engaging with the audience while I demonstrate some of the amazing things that the Query Optimizer can do if you write your queries the right way. Some people didn’t think it was technical enough, but I’ve also had some people tell me that the concepts I’m explaining are deep and profound. Brent: To me, that's a hallmark of a great explanation - when someone says, "But of course it has to work that way - how could it work any other way?  It seems so simple and logical."  Well, sure it does when it's explained correctly, but now pick up any number of thick SQL Server books and try to understand the Redundant Joins concept.  I guarantee it'll take more than 45 minutes. Rob: Some people in my audiences realise that, but definitely not everyone. There's only so much you can tell someone that something is profound. Generally it's something that they either have an epiphany on or not. I like to lull my audience into knowing what's going on, and do something that surprises them. Gain their trust, build a rapport, and then show them the deeper truth of what just happened. Brent: So you've learned your lesson about presentation scores, right?  From here on out, you're going to be dry, humorless, and all your presentations will consist of you reading bullet points off the screen. Rob: No Brent, I’m not. I'm also not going to suggest that most presentations at PASS are like that. No-one tries to present like that. There's a big space to occupy between what "dry and humourless" and me. My difference is to focus on the relationship I have with the crowd, rather than focussing on delivering the perfect session. I want to see people smiling and know they're relaxed. I think most presenters focus on the material, which is completely reasonable and safe. I remember once hearing someone talking about product creation. They talked about mediocrity. They said that one of the worst things that people can ever say about your product is that it’s “good”. What you want is for 10% of the world to love it enough to want to buy it. If 10% the world gave me a dollar, I’d have more money than I could ever use (assuming it wasn’t the SAME dollar they were giving me I guess). Brent: It's the Raving Fans theory.  It's better to have a small number of raving customers than a large number of almost-but-not-really customers who don't care that much about your product or service.  I know exactly how you feel - when I got survey feedback from my Quest video presentation when I was dressed up in a Richard Simmons costume, some of the attendees said I was unprofessional and distracting.  Some of the attendees couldn't get enough and Photoshopped all kinds of stuff into the screen captures.  On a whole, I probably didn't score that well, and I'm fine with that.  It sucks to look at the scores though - do those lower scores bother you? Rob: Of course they do. It hurts deeply. I open myself up and give presentations in a very personal way. All presenters do that, and we all feel the pain of negative feedback. I hate coming 146th & 162nd out of 185, but have to acknowledge that many sessions did worse still. Plus, once I feel the wounds have healed, I’ll be able to remember that there are people in the world that rave about my presentation style, and figure that people will hopefully talk about me. One day maybe those people that don’t like my presentation style will stay away and I might be able to score better. You don’t pay to hear country music if you prefer western... Lots of people find chili too spicy, but it’s still a popular food. Brent: But don’t you want to appeal to everyone? Rob: I do, but I don’t want to be lukewarm as in Revelation 3:16. I’d rather disgust and be discussed. Well, maybe not ‘disgust’, but I don’t want to conform. Conformity just isn’t the same any more. I’m not sure I’ve ever been one to do that. I try not to offend, but definitely like to be different. Brent: Count me among your raving fans, sir.  Where can we see you next? Rob: Considering I live in Adelaide in Australia, I’m not about to appear at anyone’s local SQL Saturday. I’m still trying to plan which events I’ll get to in 2011. I’ve submitted abstracts for TechEd North America, but won’t hold my breath. I’m also considering the SQLBits conferences in the UK in April, PASS in October, and I’m sure I’ll do some LiveMeeting presentations for user groups. Online, people download some of my recent SQLBits presentations at http://bit.ly/RFSarg and http://bit.ly/Simplification though. And they can download a 5-minute MP3 of my Lightning Talk at http://www.lobsterpot.com.au/files/Collation.mp3, in which I try to explain the idea behind collation, using thongs as an example. Brent: I was in the audience for http://bit.ly/RFSarg. That was a great presentation. Rob: Thanks, Brent. Now where’s my dollar?

    Read the article

  • Umbraco Gold Partner going from strength to strength.

    - by Vizioz Limited
    It is amazing how time flies when you are having fun and we certainly have been having an interesting year at Vizioz, I thought it was about time I wrote another blog post and shared some of our news.Over the last 6 months we have:a) Had the pleasure of working with some great clients from the USA, Ireland and the UKb) Built some interesting and complex sites for Multi-national brands (under NDA's, you'd be impressed if you knew!)c) Converted the Umbraco Users Manual to a free iBook for all those iPad owning Umbraco users.d) We have hired three new employees (Sam, Pearl & Zaara)e) We have given our notice on our current office (see below)And on the horizon:a) We have submitted Allen for Umbraco to the Apple App store for approval (hopefully this will be available very soon!)b) We are about to sign a new office lease for a new office that is twice the size of our current office, so we will have room for a meeting room, a chill out room and some more employees!So it's exciting times at Vizioz, thank you to all our fantastic clients for making this possible, we look forward to working with you all over the years to come.One thing we don't shout about as much as we probably should, we also renewed our Umbraco Gold Partner status for the second year, showing our commitment to the Umbraco CMS, if you are looking for a great Umbraco partner with experienced developers to build your new site, or to take over the on-going maintenance of an existing site, then pick up the phone and give us a call, we would love to add you to our list of happy customers!

    Read the article

< Previous Page | 60 61 62 63 64 65 66 67 68 69 70 71  | Next Page >