Search Results

Search found 3368 results on 135 pages for 'smart quotes'.

Page 64/135 | < Previous Page | 60 61 62 63 64 65 66 67 68 69 70 71  | Next Page >

• Windows 2003, SQL 2005 - What is server tasking and where do I find it?

  - by simon

  Hi, I've been reading up on how to tune SQL Server 2005 for a machine in a test environment. I came across this article on technet which suggests how to configure "server tasking" and says I should refer to the Windows 2003 docs for more info. I have googled Windows 2003 "server tasking" (with and without the quotes) but all I can find is more similar articles on SQL server telling me that it should be configured, not how/where you do it. I know I'm probably searching for the wrong thing - can someone please tell me how to configure it in Windows or SQL server, whichever it is?

  Read the article

• sox mix nested scripts on amazon ec2 rhel linux

  - by Ray

  I'm trying to use "sox" to mix some audio files. The command works great on my Mac terminal sox -m audio.wav "| sox upload.wav -p trim 2 1 pad 6" final.wav This mixes (not concatenate) audio.wav and a section of upload.wav from the 2nd second to the 3rd second and adds 6 seconds of padding in the front, and outputs to final.wav Now the problem is, the SAME EXACT command does NOT work my Amazon EC2 RHEL box. (sox is installed correctly). I get the following error sox soxio: Can't open input file `| sox upload.wav -p trim 2 2 pad 6': No such file or directory For some reason RedHat doesn't like the double quotes. Even though it is documented to be used this way. Thanks for your help!

  Read the article

• Proliant server will not accept new hard disks in RAID 1+0?

  - by Leigh

  I have a HP ProLiant DL380 G5, I have two logical drives configured with RAID. I have one logical drive RAID 1+0 with two 72 gb 10k sas 1 port spare no 376597-001. I had one hard disk fail and ordered a replacement. The configuration utility showed error and would not rebuild the RAID. I presumed a hard disk fault and ordered a replacement again. In the mean time I put the original failed disk back in the server and this started rebuilding. Currently shows ok status however in the log I can see hardware errors. The new disk has come and I again have the same problem of not accepting the hard disk. I have updated the P400 controller with the latest firmware 7.24 , but still no luck. The only difference I can see is the original drive has firmware 0103 (same as the RAID drive) and the new one has HPD2. Any advice would be appreciated. Thanks in advance Logs from server ctrl all show config Smart Array P400 in Slot 1 (sn: PAFGK0P9VWO0UQ) array A (SAS, Unused Space: 0 MB) logicaldrive 1 (68.5 GB, RAID 1, Interim Recovery Mode) physicaldrive 2I:1:1 (port 2I:box 1:bay 1, SAS, 73.5 GB, OK) physicaldrive 2I:1:2 (port 2I:box 1:bay 2, SAS, 72 GB, Failed array B (SAS, Unused Space: 0 MB) logicaldrive 2 (558.7 GB, RAID 5, OK) physicaldrive 1I:1:5 (port 1I:box 1:bay 5, SAS, 300 GB, OK) physicaldrive 2I:1:3 (port 2I:box 1:bay 3, SAS, 300 GB, OK) physicaldrive 2I:1:4 (port 2I:box 1:bay 4, SAS, 300 GB, OK) ctrl all show config detail Smart Array P400 in Slot 1 Bus Interface: PCI Slot: 1 Serial Number: PAFGK0P9VWO0UQ Cache Serial Number: PA82C0J9VWL8I7 RAID 6 (ADG) Status: Disabled Controller Status: OK Hardware Revision: E Firmware Version: 7.24 Rebuild Priority: Medium Expand Priority: Medium Surface Scan Delay: 15 secs Surface Scan Mode: Idle Wait for Cache Room: Disabled Surface Analysis Inconsistency Notification: Disabled Post Prompt Timeout: 0 secs Cache Board Present: True Cache Status: OK Cache Status Details: A cache error was detected. Run more information. Cache Ratio: 100% Read / 0% Write Drive Write Cache: Disabled Total Cache Size: 256 MB Total Cache Memory Available: 208 MB No-Battery Write Cache: Disabled Battery/Capacitor Count: 0 SATA NCQ Supported: True Array: A Interface Type: SAS Unused Space: 0 MB Status: Failed Physical Drive Array Type: Data One of the drives on this array have failed or has Logical Drive: 1 Size: 68.5 GB Fault Tolerance: RAID 1 Heads: 255 Sectors Per Track: 32 Cylinders: 17594 Strip Size: 128 KB Full Stripe Size: 128 KB Status: Interim Recovery Mode Caching: Enabled Unique Identifier: 600508B10010503956574F305551 Disk Name: \\.\PhysicalDrive0 Mount Points: C:\ 68.5 GB Logical Drive Label: A0100539PAFGK0P9VWO0UQ0E93 Mirror Group 0: physicaldrive 2I:1:2 (port 2I:box 1:bay 2, S Mirror Group 1: physicaldrive 2I:1:1 (port 2I:box 1:bay 1, S Drive Type: Data physicaldrive 2I:1:1 Port: 2I Box: 1 Bay: 1 Status: OK Drive Type: Data Drive Interface Type: SAS Size: 73.5 GB Rotational Speed: 10000 Firmware Revision: 0103 Serial Number: B379P8C006RK Model: HP DG072A9B7 PHY Count: 2 PHY Transfer Rate: Unknown, Unknown physicaldrive 2I:1:2 Port: 2I Box: 1 Bay: 2 Status: Failed Drive Type: Data Drive Interface Type: SAS Size: 72 GB Rotational Speed: 15000 Firmware Revision: HPD9 Serial Number: D5A1PCA04SL01244 Model: HP EH0072FARUA PHY Count: 2 PHY Transfer Rate: Unknown, Unknown Array: B Interface Type: SAS Unused Space: 0 MB Status: OK Array Type: Data Logical Drive: 2 Size: 558.7 GB Fault Tolerance: RAID 5 Heads: 255 Sectors Per Track: 32 Cylinders: 65535 Strip Size: 64 KB Full Stripe Size: 128 KB Status: OK Caching: Enabled Parity Initialization Status: Initialization Co Unique Identifier: 600508B10010503956574F305551 Disk Name: \\.\PhysicalDrive1 Mount Points: E:\ 558.7 GB Logical Drive Label: AF14FD12PAFGK0P9VWO0UQD007 Drive Type: Data physicaldrive 1I:1:5 Port: 1I Box: 1 Bay: 5 Status: OK Drive Type: Data Drive Interface Type: SAS Size: 300 GB Rotational Speed: 10000 Firmware Revision: HPD4 Serial Number: 3SE07QH300009923X1X3 Model: HP DG0300BALVP Current Temperature (C): 32 Maximum Temperature (C): 45 PHY Count: 2 PHY Transfer Rate: Unknown, Unknown physicaldrive 2I:1:3 Port: 2I Box: 1 Bay: 3 Status: OK Drive Type: Data Drive Interface Type: SAS Size: 300 GB Rotational Speed: 10000 Firmware Revision: HPD4 Serial Number: 3SE0AHVH00009924P8F3 Model: HP DG0300BALVP Current Temperature (C): 34 Maximum Temperature (C): 47 PHY Count: 2 PHY Transfer Rate: Unknown, Unknown physicaldrive 2I:1:4 Port: 2I Box: 1 Bay: 4 Status: OK Drive Type: Data Drive Interface Type: SAS Size: 300 GB Rotational Speed: 10000 Firmware Revision: HPD4 Serial Number: 3SE08NAK00009924KWD6 Model: HP DG0300BALVP Current Temperature (C): 35 Maximum Temperature (C): 47 PHY Count: 2 PHY Transfer Rate: Unknown, Unknown

  Read the article

• Are Snow Leopard text substitutions scriptable?

  - by yonatron

  I prefer using typographical quotation marks when possible, so I love the Smart Quotes part of Snow Leopard’s text replacement feature. But there are a few cases in which I need to toggle it, and it’s a pain to do so from the contextual menu when I’m typing. Is there any way (preferably via AppleScript, but I can deal with other suggestions) to toggle specific types of text replacement for the frontmost text-input control? And if so, what’s a good way to assign it to a globally-accessible keyboard shortcut (via 3rd-party app if necessary)?

  Read the article

• What technical reasons exist for not using space characters in file names?

  - by Chris W. Rea

  Somebody I know expressed irritation today regarding those of us who tend not to use spaces in our filenames, e.g. NamingThingsLikeThis.txt -- despite most modern operating systems supporting spaces in filenames. Are there technical reasons that it's still common to see file names without (appropriate) spaces? If so, what are these technical reasons that spaces in filenames are avoided or discouraged, and in what circumstances are they relevant? The most obvious reason I could think of, and why I typically avoid it, are the extra quotes required on the command line when dealing with such files. Are there any other significant technical reasons?

  Read the article

• Switching over an email address from a distribution group to a user account in Exchange 2003

  - by Sevdarkseed

  I'm currently in a transition mode. We currently have a Distribution Group called Quotes and Orders that send out emails to several users. I'm told that a better method would be to create a user and then give access to that fictitious user's email account so that everyone would be able to see everything that goes out and is responded to in a single account. However, I'm not sure what the best method would be for creating an account and shutting down the distribution group. I'm thinking more along the lines of the steps that considered best practice to remove the email account from the distribution group and attach it to the user account. Any thoughts?

  Read the article

• Setting up and moving a distribution group to a public folder in Exchange 2003

  - by Sevdarkseed

  I'm looking for some advice with something that seems simple but I haven't done before. Currently we use a distribution group called Orders that has an email address that is that forwarded to four people in the company, the same goes for another one, Quotes. The problem is, of course, no one knows what was answered, and all the email gets worked in to the individual user's emails, so I'm thinking that a public folder, only accessible by one department would be the answer. I'm not sure what the best way to set this up would be or how to move/convert the current distribution list over to a public folder. This is a very critical email address in the company, so I'm trying to be sure that there is zero down time at all for it. What would be the best way to go about creating a public folder and converting/forwarding/moving/(whatever) over the current email address to that folder?

  Read the article

• Escape a ! in the password parameter of wget

  - by Dave

  I'm trying to execute something like this: wget --user=foo --password=bar! url The ! in the password is causing problems. I've tried escaping it with \, as in --password=bar\! I've tried encapsulating in single and double quotes. I put the password in a separate file and tried --password=cat pass.txt Each time, I get a 403 Forbidden. Using -d, I see that the SSL handshake is successful. On the Windows command line, the command works. My assumption is that I need to escape the ! differently, but I don't know how else.

  Read the article

• Colored PS1 string

  - by Will Vousden

  Clarification: I want __foo to be executed each time the PS1 string is presented in the terminal, not when the PS1 string is constructed (hence its being in quotes). __foo contains logic that examines the current directory, so its execution must be deferred. I'm trying to use different colours in my Bash PS1 string from within a Bash function: LIGHTRED="\033[1;31m" LIGHTGREEN="\033[1;32m" RESET="\033[m" __foo () { # Do some stuff and genereate a string to echo in different colours: echo -n '\['$1'\]firstcolour \['$2'\]secondcolour' } PS1='$(__foo '$LIGHTRED' '$LIGHTGREEN')\['$RESET'\] \$' Essentially I want __foo to generate part of the PS1 in a bunch of different colours. My attempt doesn't seem to work, though; it produces the following output: -bash: 31m: command not found -bash: 32m: command not found \[]firstcolour \[\]secondcolour $ What gives, and how can I fix it?

  Read the article

• Schedule a batch file with parameters containing spaces

  - by Danilo Brambilla

  Hi, I need to schedule a task in Windows Server 2003 that executes this script that deletes files older that n days in the specified folder. The script needs 3 parameters: %1 path to folder where files need to be deleted %2 file names (es. *.log) %3 number of days @echo off forfiles -p %1 -s -m %2 -d -%3 -c "cmd /c del /q @path" The script works fine if the first parameter has no spaces inside. This is an example of parameters that work: "C:\Program Files\SCRIPT\DeleteFilesOlderThanXDays.cmd" N:\FOLDER\FOLDER *.zip 60 This is an example that does not work: "C:\Program Files\SCRIPT\DeleteFilesOlderThanXDays.cmd" N:\Program Files\LOG *.zip 60 This does not work too: "C:\Program Files\SCRIPT\DeleteFilesOlderThanXDays.cmd" "N:\Program Files\LOG" *.zip 60 I think it would be a quotes problem but I can't figure out the solution. I'd like not to insert values directly into the script if possible Thank you all for help

  Read the article

• Installing XP through USB-flash disc

  - by Crazy Buddy

  I don't know whether this could be asked here... So, Pardon me for this. Probably, this is based on My laptop and a contradiction to this question asked already here... I tried to format my "government-provided" laptop (No CD-drive). I thought those IT guys are proving that they're too smart..! I have the Windows XP CD right now. I didn't like to stick with some home-made OS from our Government. So, I used another laptop to format the govt. thing and tried to install XP (As I didn't have enough bills to invest on Windows 7 or 8). Case 1: First, I allowed WinSetupFromUSB 1.0 beta 8 to deal with the flash disk. I wondered for the first time that XP text-screen appeared. Using the first part, I formatted my laptop. It started to copy files, entered into the next part, and completed the installation. I started my PC for the first time. XP splash screen appeared. Suddenly, a blue screen flashed and disappeared (I can't even read what it says). Rebooted and arrived at the screen, "Start Windows Normally". It happens and happens still - like an infinite loop :-) Case 2: Next, I used Rufus 1.2.0 to transfer files to my Flash and it screwed everything out. Even if I used Flash to boot, it arrives to the same screen "Start Windows normally". It doesn't show any response of Flash being inserted. Then I recognized that, It's simply copies everything to the flash disk. Case 3: Then, I started with Novicorp WinToFlash (giving utmost priority to this site). I booted with the disk. I entered into the first part - "Text mode". Some lines started running like that "Press F6 if you..." like that. The last thing I saw was, "Setup is starting Windows..." Suddenly a blue screen appeared like this captured one. I've a suspicion that the same screen appears again & again in first case. Man, I'm dead. Case 4: For the sake of my last hope, I used WinSetupFromUSB 0.1.1. I was shocked on arriving at a screen which says something "GRUB4DOS" like that and some commands like {command line, reboot, halt, \find menu.lst} and when I go inside those "find" options, I see "Error:15 - File not found". Googling provided some commands to mount SETUPLDR.BIN file in the "grub" thing which also proved unsuccessful... Some sites say that Factory reset uses only some function keys. A guy said that it's F11 for lenovo. Screw him. It's all a waste-of-time. But, I think SE would help me out. Is our government IT guys doin' this to me? Are they Soooo smart to spark some blue screen in front of me to freak me out? Any suggestions or new (useful) USB transferring things would be appreciated. It's very urgent. So, It'd be better if you guys pay some attention in debugging and help me out..? Thanks for your time guys :-)

  Read the article

• Pointcast Alternatives?

  - by kellyllek

  I used to love Pointcast in the early days of the internet; it was a screensaver that, like RSS feeds, brought in all your favorite sources with news articles and stock quotes along with various other info and turned it into a visually interesting screensaver. It was before broadband though and I heard so many work places had to ban it that the company eventually folded. But I wondered if there are any modern day equivalents? I certainly have feed readers and some awesome desktop gadgets that bring in various things like news and weather, and I don't want a whole screensaver like pointcast. But I wondered if anyone out there had other suggestions worth taking a look at; making some kind of feed display of interest, or some other way to turn favorite content into more animated desktop background, etc...

  Read the article

• Installing php(suexec) for Apache

  - by John

  I've got Apache installed and running but how do i install and run PHP as fastcgi so it runs as its own user? here is my apache config: ./configure --prefix=/usr/local/apache2 --enable-rewrite=shared --enable-so --enable-suexec --disable-asis --disable-autoindex --enable-cache --enable-deflate --enable-disk-cache --enable-expires --enable-file-cache --enable-mem-cache --enable-ssl --enable-vhost-alias --with-mpm=prefork --with-port=8080 here is my php config: ./configure prefix=/usr/local/php --without-pear --enable-safe-mode --enable-magic-quotes --with-apxs2=/usr/local/apache2/bin/apxs --disable-cli --disable-cgi --enable-force-cgi-redirect --enable-fastcgi --with-mysql --with-gd --with-jpeg-dir=/usr/lib --with-png-dir=/usr/lib --with-freetype-dir=/usr/lib --enable-calendar --with-curl --enable-mbstring --with-mcrypt

  Read the article

• Excel cutting out down over 1024 characters

  - by Zeno

  I am using Excel 2003 to save a large file as a CSV. But when saving cells that contain over 1024 characters, it cuts out the characters beyond 1024. Per a previous question, I am using this official macro to save: http://support.microsoft.com/default.aspx?scid=kb;en-us;291296&Product=xlw This macro in question is probably causing it, since I'm not using the normal Save As (in order to put quotes around every field). It may not be 1024 characters, but long cells are getting cut off. What in this macro is causing that?

  Read the article

• Getting Excel to handle CRLF's correctly in CSV

  - by Ben Fulton

  I am creating CSV files to be opened in Excel. The rows are separated by CRLF and that's fine, but some of the input data contains CRLF data in it as well. Per the usual standards, I surround them with quotes, but Excel doesn't seem to recognize the CR character and puts a little box with a question mark in it instead. I can strip the CR's out of the CSV file, but it seems like an unnecessary step. Is there an easy way to get Excel to recognize a CRLF inside a row of a CSV file?

  Read the article

• Bad HD video deinterlacing processing

  - by Guy Fawkes

  I have Ubuntu 12.04 32-bit with Unity. My system configuration is: CPU: Core 2 Quad Q6600 (2.4 GHz) RAM: 8192 Mb DDR2 Kingston Video: Palit GeForce GTX 260 216 SP, and my screen resolution is 1680x1050. I also have Window 7 Ulitimate installed, and I can see the same files in Media Player Classic without any horizontal lines. I've installed vdpau driver, NVIDIA drivers 304.51, and MPlayer 2 (within SMPlayer). I've disabled "Sync to VBlank" option in CCSM (because in other way, by default, MPlayer process use about 50-60 percents of my processor load), tried to swich between different deinterlace options in SMPlayer, used "-vc ffh264vdpau,ffmpeg12vdpau" (without quotes) parameters for MPlayer, switched to "Ubuntu 2D", but, finally, have no results. Any suggestions? How must I to set up MPlayer?

  Read the article

• linux raid 1: right after replacing and syncing one drive, the other disk fails - understanding what is going on with mdstat/mdadm

  - by devicerandom

  We have an old RAID 1 Linux server (Ubuntu Lucid 10.04), with four partitions. A few days ago /dev/sdb failed, and today we noticed /dev/sda had pre-failure ominous SMART signs (~4000 reallocated sector count). We replaced /dev/sdb this morning and rebuilt the RAID on the new drive, following this guide: http://www.howtoforge.com/replacing_hard_disks_in_a_raid1_array Everything went smooth until the very end. When it looked like it was finishing to synchronize the last partition, the other old one failed. At this point I am very unsure of the state of the system. Everything seems working and the files seem to be all accessible, just as if it synchronized everything, but I'm new to RAID and I'm worried about what is going on. The /proc/mdstat output is: Personalities : [raid1] [linear] [multipath] [raid0] [raid6] [raid5] [raid4] [raid10] md3 : active raid1 sdb4[2](S) sda4[0] 478713792 blocks [2/1] [U_] md2 : active raid1 sdb3[1] sda3[2](F) 244140992 blocks [2/1] [_U] md1 : active raid1 sdb2[1] sda2[2](F) 244140992 blocks [2/1] [_U] md0 : active raid1 sdb1[1] sda1[2](F) 9764800 blocks [2/1] [_U] unused devices: <none> The order of [_U] vs [U_]. Why aren't they consistent along all the array? Is the first U /dev/sda or /dev/sdb? (I tried looking on the web for this trivial information but I found no explicit indication) If I read correctly for md0, [_U] should be /dev/sda1 (down) and /dev/sdb1 (up). But if /dev/sda has failed, how can it be the opposite for md3 ? I understand /dev/sdb4 is now spare because probably it failed to synchronize it 100%, but why does it show /dev/sda4 as up? Shouldn't it be [__]? Or [_U] anyway? The /dev/sda drive now cannot even be accessed by SMART anymore apparently, so I wouldn't expect it to be up. What is wrong with my interpretation of the output? I attach also the outputs of mdadm --detail for the four partitions: /dev/md0: Version : 00.90 Creation Time : Fri Jan 21 18:43:07 2011 Raid Level : raid1 Array Size : 9764800 (9.31 GiB 10.00 GB) Used Dev Size : 9764800 (9.31 GiB 10.00 GB) Raid Devices : 2 Total Devices : 2 Preferred Minor : 0 Persistence : Superblock is persistent Update Time : Tue Nov 5 17:27:33 2013 State : clean, degraded Active Devices : 1 Working Devices : 1 Failed Devices : 1 Spare Devices : 0 UUID : a3b4dbbd:859bf7f2:bde36644:fcef85e2 Events : 0.7704 Number Major Minor RaidDevice State 0 0 0 0 removed 1 8 17 1 active sync /dev/sdb1 2 8 1 - faulty spare /dev/sda1 /dev/md1: Version : 00.90 Creation Time : Fri Jan 21 18:43:15 2011 Raid Level : raid1 Array Size : 244140992 (232.83 GiB 250.00 GB) Used Dev Size : 244140992 (232.83 GiB 250.00 GB) Raid Devices : 2 Total Devices : 2 Preferred Minor : 1 Persistence : Superblock is persistent Update Time : Tue Nov 5 17:39:06 2013 State : clean, degraded Active Devices : 1 Working Devices : 1 Failed Devices : 1 Spare Devices : 0 UUID : 8bcd5765:90dc93d5:cc70849c:224ced45 Events : 0.1508280 Number Major Minor RaidDevice State 0 0 0 0 removed 1 8 18 1 active sync /dev/sdb2 2 8 2 - faulty spare /dev/sda2 /dev/md2: Version : 00.90 Creation Time : Fri Jan 21 18:43:19 2011 Raid Level : raid1 Array Size : 244140992 (232.83 GiB 250.00 GB) Used Dev Size : 244140992 (232.83 GiB 250.00 GB) Raid Devices : 2 Total Devices : 2 Preferred Minor : 2 Persistence : Superblock is persistent Update Time : Tue Nov 5 17:46:44 2013 State : clean, degraded Active Devices : 1 Working Devices : 1 Failed Devices : 1 Spare Devices : 0 UUID : 2885668b:881cafed:b8275ae8:16bc7171 Events : 0.2289636 Number Major Minor RaidDevice State 0 0 0 0 removed 1 8 19 1 active sync /dev/sdb3 2 8 3 - faulty spare /dev/sda3 /dev/md3: Version : 00.90 Creation Time : Fri Jan 21 18:43:22 2011 Raid Level : raid1 Array Size : 478713792 (456.54 GiB 490.20 GB) Used Dev Size : 478713792 (456.54 GiB 490.20 GB) Raid Devices : 2 Total Devices : 2 Preferred Minor : 3 Persistence : Superblock is persistent Update Time : Tue Nov 5 17:19:20 2013 State : clean, degraded Active Devices : 1 Working Devices : 2 Failed Devices : 0 Spare Devices : 1 Number Major Minor RaidDevice State 0 8 4 0 active sync /dev/sda4 1 0 0 1 removed 2 8 20 - spare /dev/sdb4 The active sync on /dev/sda4 baffles me. I am worried because if tomorrow morning I have to replace /dev/sda, I want to be sure what should I sync with what and what is going on. I am also quite baffled by the fact /dev/sda decided to fail exactly when the raid finished resyncing. I'd like to understand what is really happening. Thanks a lot for your patience and help. Massimo

  Read the article

• how to stop powershell mangling command line options for program executed from shell?

  - by kem

  From the powershell prompt, when I try to run a program and feed it a command line option, powershell ends up mangling the option. Why does this happen? Is there any way to stop it besides enclosing the option in quotes? For example, from the powershell prompt: PS Microsoft.PowerShell.Core\FileSystem::\\mach\share .\myprog.exe -file=input.txt myprog.exe ends up getting two arguments: 1) -file=input 2) .txt I need to run it like: .\myprog.exe "-file=input.txt" or .\myprog.exe '-file=input.txt' to force it to be one argument. No other shell does this.

  Read the article

• How can I insert the quoted price of gold from kitco.com into my excel spreadsheet?

  - by Frank Computer

  kitco.com provides a realtime price quote for gold and other metals. I have a spreadsheet which makes calculations based on the price of gold and would like for this realtime value to automatically be updated on my excel sheet. I tried 'get external data' from a website but that didn't work. any ideas? EDIT ADDED: Kitco has a gadget called KCAST which displays realtime quotes on the Windows taskbar. I tried capturing those values from the taskbar but that didn't work either. Maybe if Kitco provided an API or feed, it could be done?

  Read the article

• network path not found error on creating schtasks

  - by user50273

  I am getting "ERROR: Network path was not found" when I try to create a scheduled task on my local machine. I am using this command at the command prompt: schtasks /tn taskname /tr taskpath /sc minute /mo 20 /sd 09/23/2010 /s \\%computername% /u username /p password When I give the above command without computername, username and password the task gets created perfectly fine. What am I doing wrong?? EDIT : I got it working by using the below command. I do not understand why it is working becuase I am using /ru and /rp which are remote user and remote password settings whereas I am executing the command on my local machine. And I had to give double quotes to computername. schtasks /tn taskname /tr taskpath /sc minute /mo 20 /sd 09/23/2010 /s "%computername%" /ru username /rp password

  Read the article

• Exchange Failover Solution

  - by Dan

  I've been given the task to come up with an exchange solution that will support 200 users total throughout 4 states. 1GB per user. It needs to have a failover solution,The failover must reside in another location. There is an mpls that connects the locations. I am hoping to get recomendations on hardware, software setups. I recently worked with some big name reps and they steered me in the wrong direction and now I'm a few days away from my proposal date with bogus quotes and scrambling for a solution. I used to manage a standalone 2003 exchange server for years and am at a loss now with figuring out a clustering/failover...Any help would be greatly appreciated. thank you

  Read the article

• snort-mysql not starting on Ubuntu server

  - by Rsaesha

  I am following this tutorial: https://help.ubuntu.com/community/SnortIDS I've set up the database, everything has installed correctly, and I've configured the snort.conf file so it outputs to a database (with creds all filled out ok). When I run /etc/init.d/snort start, it fails but does not produce any error message other than [fail]. The last few lines of /var/log/syslog are: snort[5687]: database: must enter database name in configuration file#012 snort[5687]: FATAL ERROR: My output database line in the snort.conf file is: output database: log, mysql, user=snort password=... dbname=snort host=localhost I have tried it with the commas separating everything, putting quotes around stuff, etc. The password is only made up of letters (after I thought maybe a number was throwing it off).

  Read the article

• How do you create a SQL query in Excel 2007 with a dynamic date range?

  - by Jordan

  I am trying to create a reporting spreadsheet that can print reports for a given time period. The query below works, but when I try to use a "?" parameter in place of the date, I get an error after selecting a cell containing my date. If I use single quotes ('?') I get a conversion from string to date/time failure, if I don't (?) I get a syntax error near @p1. Eventually I will need either a start and end date or a formula adding a month or shift to the starting date/time to filter the data down to important information. The query was built in Microsoft Query. SELECT FloatTable.DateAndTime, TagTable.TagName FROM master.dbo.FloatTable FloatTable, master.dbo.TagTable TagTable WHERE FloatTable.TagIndex = TagTable.TagIndex AND ((FloatTable.DateAndTime={ts '2012-06-01 00:00:00'})) Any assistance would be much appreciated. Thanks in advance.

  Read the article

• creating video from set of images on windows with java language [on hold]

  - by Atif

  I am stuck in making video from set of images, i am using ffmpeg tool on windows platform with java language, for single image it is converting into mp4 but for the set of images it gets failed, i have converted single % to double % with doube quotes but unsuccessful ffmpeg -r 1/5 -i "D:\novoworkspace\MGram\src\biz\novosol\mgram\main\img%%04d.jpg" -c:v libx264 -r 30 -pix_fmt yuv420p D:\novoworkspace\MGram\src\biz\novosol\mgram\main\video.mp4 Above is the exact command i tried from the command line as well from the java language with getRuntime() method. Environment is widows please suggest is it possibe under windows or I have to use some alternative Thanks Atif

  Read the article

• Personally identifiable information (PII) on shared web hosting

  - by S. Cobbs

  Hey folks, I am providing web hosting services (shared and dedicated) and have had one of my shared hosting clients mention needing an SSL cert for their site where they are collecting insurance quotes in a form, including names and social security numbers. My privacy sense is tingling, and I'm pretty sure it's not legal (in the US) to do this on a shared system, but can't find anything to support my thoughts outside of PCI-DSS, but the customer isn't processing payments through the site so I'm not sure if that applies. I'm reading lots of policy documents where people advise to minimize and manage the PII footprint internally, but as the host I don't want to put all of my customer's clients at possible risk. I'm not looking here for legal advice necessarily, but perhaps someone in a similar position to mine can provide some rule of thumb or point me in the right direction.

  Read the article

< Previous Page | 60 61 62 63 64 65 66 67 68 69 70 71  | Next Page >