Search Results

Search found 10242 results on 410 pages for 'stored proc'.

Page 64/410 | < Previous Page | 60 61 62 63 64 65 66 67 68 69 70 71  | Next Page >

• Linux software RAID6: rebuild slow

  - by Ole Tange

  I am trying to find the bottleneck in the rebuilding of a software raid6. ## Pause rebuilding when measuring raw I/O performance # echo 1 > /proc/sys/dev/raid/speed_limit_min # echo 1 > /proc/sys/dev/raid/speed_limit_max ## Drop caches so that does not interfere with measuring # sync ; echo 3 | tee /proc/sys/vm/drop_caches >/dev/null # time parallel -j0 "dd if=/dev/{} bs=256k count=4000 | cat >/dev/null" ::: sdbd sdbc sdbf sdbm sdbl sdbk sdbe sdbj sdbh sdbg 4000+0 records in 4000+0 records out 1048576000 bytes (1.0 GB) copied, 7.30336 s, 144 MB/s [... similar for each disk ...] # time parallel -j0 "dd if=/dev/{} skip=15000000 bs=256k count=4000 | cat >/dev/null" ::: sdbd sdbc sdbf sdbm sdbl sdbk sdbe sdbj sdbh sdbg 4000+0 records in 4000+0 records out 1048576000 bytes (1.0 GB) copied, 12.7991 s, 81.9 MB/s [... similar for each disk ...] So we can read sequentially at 140 MB/s in the outer tracks and 82 MB/s in the inner tracks on all the drives simultaneously. Sequential write performance is similar. This would lead me to expect a rebuild speed of 82 MB/s or more. # echo 800000 > /proc/sys/dev/raid/speed_limit_min # echo 800000 > /proc/sys/dev/raid/speed_limit_max # cat /proc/mdstat md2 : active raid6 sdbd[10](S) sdbc[9] sdbf[0] sdbm[8] sdbl[7] sdbk[6] sdbe[11] sdbj[4] sdbi[3](F) sdbh[2] sdbg[1] 27349121408 blocks super 1.2 level 6, 128k chunk, algorithm 2 [9/8] [UUU_UUUUU] [=========>...........] recovery = 47.3% (1849905884/3907017344) finish=855.9min speed=40054K/sec But we only get 40 MB/s. And often this drops to 30 MB/s. # iostat -dkx 1 sdbc 0.00 8023.00 0.00 329.00 0.00 33408.00 203.09 0.70 2.12 1.06 34.80 sdbd 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 sdbe 13.00 0.00 8334.00 0.00 33388.00 0.00 8.01 0.65 0.08 0.06 47.20 sdbf 0.00 0.00 8348.00 0.00 33388.00 0.00 8.00 0.58 0.07 0.06 48.00 sdbg 16.00 0.00 8331.00 0.00 33388.00 0.00 8.02 0.71 0.09 0.06 48.80 sdbh 961.00 0.00 8314.00 0.00 37100.00 0.00 8.92 0.93 0.11 0.07 54.80 sdbj 70.00 0.00 8276.00 0.00 33384.00 0.00 8.07 0.78 0.10 0.06 48.40 sdbk 124.00 0.00 8221.00 0.00 33380.00 0.00 8.12 0.88 0.11 0.06 47.20 sdbl 83.00 0.00 8262.00 0.00 33380.00 0.00 8.08 0.96 0.12 0.06 47.60 sdbm 0.00 0.00 8344.00 0.00 33376.00 0.00 8.00 0.56 0.07 0.06 47.60 iostat says the disks are not 100% busy (but only 40-50%). This fits with the hypothesis that the max is around 80 MB/s. Since this is software raid the limiting factor could be CPU. top says: PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 38520 root 20 0 0 0 0 R 64 0.0 2947:50 md2_raid6 6117 root 20 0 0 0 0 D 53 0.0 473:25.96 md2_resync So md2_raid6 and md2_resync are clearly busy taking up 64% and 53% of a CPU respectively, but not near 100%. The chunk size (128k) of the RAID was chosen after measuring which chunksize gave the least CPU penalty. If this speed is normal: What is the limiting factor? Can I measure that? If this speed is not normal: How can I find the limiting factor? Can I change that?

  Read the article

• iptables rule(s) to send openvpn traffic from clients over an sshuttle tunnel?

  - by Sam Martin

  I have an Ubuntu 12.04 box with OpenVPN. The VPN is working as expected -- clients can connect, browse the Web, etc. The OpenVPN server IP is 10.8.0.1 on tun0. On that same box, I can use sshuttle to tunnel into another network to access a Web server on 10.10.0.9. sshuttle does its magic using the following iptables commands: iptables -t nat -N sshuttle-12300 iptables -t nat -F sshuttle-12300 iptables -t nat -I OUTPUT 1 -j sshuttle-12300 iptables -t nat -I PREROUTING 1 -j sshuttle-12300 iptables -t nat -A sshuttle-12300 -j REDIRECT --dest 10.10.0.0/24 -p tcp --to-ports 12300 -m ttl ! --ttl 42 iptables -t nat -A sshuttle-12300 -j RETURN --dest 127.0.0.0/8 -p tcp Is it possible to forward traffic from OpenVPN clients over the sshuttle tunnel to the remote Web server? I'd ultimately like to be able to set up any complicated tunneling on the server, and have relatively "dumb" clients (iPad, etc.) be able to access the remote servers via OpenVPN. Below is a basic diagram of the scenario: [Edit: added output from the OpenVPN box] $ sudo iptables -nL -v -t nat Chain PREROUTING (policy ACCEPT 1498 packets, 252K bytes) pkts bytes target prot opt in out source destination 1512 253K sshuttle-12300 all -- * * 0.0.0.0/0 0.0.0.0/0 Chain INPUT (policy ACCEPT 322 packets, 58984 bytes) pkts bytes target prot opt in out source destination Chain OUTPUT (policy ACCEPT 584 packets, 43241 bytes) pkts bytes target prot opt in out source destination 587 43421 sshuttle-12300 all -- * * 0.0.0.0/0 0.0.0.0/0 Chain POSTROUTING (policy ACCEPT 589 packets, 43595 bytes) pkts bytes target prot opt in out source destination 1175 76298 MASQUERADE all -- * eth0 10.8.0.0/24 0.0.0.0/0 Chain sshuttle-12300 (2 references) pkts bytes target prot opt in out source destination 17 1076 REDIRECT tcp -- * * 0.0.0.0/0 10.10.0.0/24 TTL match TTL != 42 redir ports 12300 0 0 RETURN tcp -- * * 0.0.0.0/0 127.0.0.0/8 $ sudo iptables -nL -v -t filter Chain INPUT (policy ACCEPT 97493 packets, 30M bytes) pkts bytes target prot opt in out source destination Chain FORWARD (policy ACCEPT 0 packets, 0 bytes) pkts bytes target prot opt in out source destination 131K 109M ACCEPT all -- * * 0.0.0.0/0 0.0.0.0/0 state RELATED,ESTABLISHED 1370 89160 ACCEPT all -- * * 10.8.0.0/24 0.0.0.0/0 0 0 REJECT all -- * * 0.0.0.0/0 0.0.0.0/0 reject-with icmp-port-unreachable [Edit 2: more OpenVPN server output] $ netstat -r Kernel IP routing table Destination Gateway Genmask Flags MSS Window irtt Iface default 192.168.1.1 0.0.0.0 UG 0 0 0 eth0 10.8.0.0 10.8.0.2 255.255.255.0 UG 0 0 0 tun0 10.8.0.2 * 255.255.255.255 UH 0 0 0 tun0 192.168.1.0 * 255.255.255.0 U 0 0 0 eth0 [Edit 3: still more debug output] IP forwarding appears to be enabled correctly on the OpenVPN server: # find /proc/sys/net/ipv4/conf/ -name forwarding -ls -execdir cat {} \; 18926 0 -rw-r--r-- 1 root root 0 Mar 5 13:31 /proc/sys/net/ipv4/conf/all/forwarding 1 18954 0 -rw-r--r-- 1 root root 0 Mar 5 13:31 /proc/sys/net/ipv4/conf/default/forwarding 1 18978 0 -rw-r--r-- 1 root root 0 Mar 5 13:31 /proc/sys/net/ipv4/conf/eth0/forwarding 1 19003 0 -rw-r--r-- 1 root root 0 Mar 5 13:31 /proc/sys/net/ipv4/conf/lo/forwarding 1 19028 0 -rw-r--r-- 1 root root 0 Mar 5 13:31 /proc/sys/net/ipv4/conf/tun0/forwarding 1 Client routing table: $ netstat -r Routing tables Internet: Destination Gateway Flags Refs Use Netif Expire 0/1 10.8.0.5 UGSc 8 48 tun0 default 192.168.1.1 UGSc 2 1652 en1 10.8.0.1/32 10.8.0.5 UGSc 1 0 tun0 10.8.0.5 10.8.0.6 UHr 13 0 tun0 10.10.0/24 10.8.0.5 UGSc 0 0 tun0 <snip> Traceroute from client: $ traceroute 10.10.0.9 traceroute to 10.10.0.9 (10.10.0.9), 64 hops max, 52 byte packets 1 10.8.0.1 (10.8.0.1) 5.403 ms 1.173 ms 1.086 ms 2 192.168.1.1 (192.168.1.1) 4.693 ms 2.110 ms 1.990 ms 3 l100.my-verizon-garbage (client-ext-ip) 7.453 ms 7.089 ms 6.248 ms 4 * * * 5 10.10.0.9 (10.10.0.9) 14.915 ms !N * 6.620 ms !N

  Read the article

• Oracle Linux 6 DVDs Now Available

  - by sergio.leunissen

  On Sunday 6 February 2011, Oracle Linux 6 was released on the Unbreakable Linux Network for customers with an Oracle Linux support subscription. Shortly after that, the Oracle Linux 6 RPMs were made available on our public yum server. Today we published the installation DVD images on edelivery.oracle.com/linux. Oracle Linux 6 is free to download, install and use. The full release notes are here, but similar to my recent post about Oracle Linux 5.6, I wanted to highlight a few items about this release. Unbreakable Enterprise Kernel As is the case with Oracle Linux 5.6, the default installed kernel on x86_64 platform in Oracle Linux 6 is the Unbreakable Enterprise Kernel. If you haven't already, I highly recommend you watch the replay of this webcast by Chris Mason on the performance improvements made in this kernel. # uname -r 2.6.32-100.28.5.el6.x86_64 The Unbreakable Enterprise Kernel is delivered via the package kernel-uek: [root@localhost ~]# yum info kernel-uek ... Installed Packages Name : kernel-uek Arch : x86_64 Version : 2.6.32 Release : 100.28.5.el6 Size : 84 M Repo : installed From repo : anaconda-OracleLinuxServer-201102031546.x86_64 Summary : The Linux kernel URL : http://www.kernel.org/ License : GPLv2 Description: The kernel package contains the Linux kernel (vmlinuz), the core of : any Linux operating system. The kernel handles the basic functions : of the operating system: memory allocation, process allocation, : device input and output, etc. ext4 file system The ext4 or fourth extended filesystem replaces ext3 as the default filesystem in Oracle Linux 6. # mount /dev/mapper/VolGroup-lv_root on / type ext4 (rw) proc on /proc type proc (rw) sysfs on /sys type sysfs (rw) devpts on /dev/pts type devpts (rw,gid=5,mode=620) tmpfs on /dev/shm type tmpfs (rw,rootcontext="system_u:object_r:tmpfs_t:s0") /dev/sda1 on /boot type ext4 (rw) none on /proc/sys/fs/binfmt_misc type binfmt_misc (rw) Red Hat compatible kernel Oracle Linux 6 also includes a Red Hat compatible kernel built directly from RHEL source. It's already installed, so booting it is a matter of editing /etc/grub.conf # rpm -qa | grep kernel-2.6.32 kernel-2.6.32-71.el6.x86_64 Oracle Linux 6 no longer includes a Red Hat compatible kernel with Oracle bug fixes. The only Red Hat compatible kernel included is the one built directly from RHEL source. Yum-only access to Unbreakable Linux Network (ULN) Oracle Linux 6 uses yum exclusively for access to Unbreakable Linux Network. To register your system with ULN, use the following command: # uln_register No Itanium Support Oracle Linux 6 is not supported on the Itanium (ia64) platform. Next Steps Read the release notes Download Oracle Linux 6 for free Discuss on the Oracle Linux forum

  Read the article

• SQL Server Split() Function

  - by HighAltitudeCoder

  Title goes here   Ever wanted a dbo.Split() function, but not had the time to debug it completely?  Let me guess - you are probably working on a stored procedure with 50 or more parameters; two or three of them are parameters of differing types, while the other 47 or so all of the same type (id1, id2, id3, id4, id5...).  Worse, you've found several other similar stored procedures with the ONLY DIFFERENCE being the number of like parameters taped to the end of the parameter list. If this is the situation you find yourself in now, you may be wondering, "why am I working with three different copies of what is basically the same stored procedure, and why am I having to maintain changes in three different places?  Can't I have one stored procedure that accomplishes the job of all three? My answer to you: YES!  Here is the Split() function I've created.    /******************************************************************************                                       Split.sql   ******************************************************************************/ /******************************************************************************   Split a delimited string into sub-components and return them as a table.   Parameter 1: Input string which is to be split into parts. Parameter 2: Delimiter which determines the split points in input string. Works with space or spaces as delimiter. Split() is apostrophe-safe.   SYNTAX: SELECT * FROM Split('Dvorak,Debussy,Chopin,Holst', ',') SELECT * FROM Split('Denver|Seattle|San Diego|New York', '|') SELECT * FROM Split('Denver is the super-awesomest city of them all.', ' ')   ******************************************************************************/ USE AdventureWorks GO   IF EXISTS       (SELECT *       FROM sysobjects       WHERE xtype = 'TF'       AND name = 'Split'       ) BEGIN       DROP FUNCTION Split END GO   CREATE FUNCTION Split (       @InputString                  VARCHAR(8000),       @Delimiter                    VARCHAR(50) )   RETURNS @Items TABLE (       Item                          VARCHAR(8000) )   AS BEGIN       IF @Delimiter = ' '       BEGIN             SET @Delimiter = ','             SET @InputString = REPLACE(@InputString, ' ', @Delimiter)       END         IF (@Delimiter IS NULL OR @Delimiter = '')             SET @Delimiter = ','   --INSERT INTO @Items VALUES (@Delimiter) -- Diagnostic --INSERT INTO @Items VALUES (@InputString) -- Diagnostic         DECLARE @Item                 VARCHAR(8000)       DECLARE @ItemList       VARCHAR(8000)       DECLARE @DelimIndex     INT         SET @ItemList = @InputString       SET @DelimIndex = CHARINDEX(@Delimiter, @ItemList, 0)       WHILE (@DelimIndex != 0)       BEGIN             SET @Item = SUBSTRING(@ItemList, 0, @DelimIndex)             INSERT INTO @Items VALUES (@Item)               -- Set @ItemList = @ItemList minus one less item             SET @ItemList = SUBSTRING(@ItemList, @DelimIndex+1, LEN(@ItemList)-@DelimIndex)             SET @DelimIndex = CHARINDEX(@Delimiter, @ItemList, 0)       END -- End WHILE         IF @Item IS NOT NULL -- At least one delimiter was encountered in @InputString       BEGIN             SET @Item = @ItemList             INSERT INTO @Items VALUES (@Item)       END         -- No delimiters were encountered in @InputString, so just return @InputString       ELSE INSERT INTO @Items VALUES (@InputString)         RETURN   END -- End Function GO   ---- Set Permissions --GRANT SELECT ON Split TO UserRole1 --GRANT SELECT ON Split TO UserRole2 --GO   The syntax is basically as follows: SELECT <fields> FROM Table 1 JOIN Table 2 ON ... JOIN Table 3 ON ... WHERE LOGICAL CONDITION A AND LOGICAL CONDITION B AND LOGICAL CONDITION C AND TABLE2.Id IN (SELECT * FROM Split(@IdList, ',')) @IdList is a parameter passed into the stored procedure, and the comma (',') is the delimiter you have chosen to split the parameter list on. You can also use it like this: SELECT <fields> FROM Table 1 JOIN Table 2 ON ... JOIN Table 3 ON ... WHERE LOGICAL CONDITION A AND LOGICAL CONDITION B AND LOGICAL CONDITION C HAVING COUNT(SELECT * FROM Split(@IdList, ',') Similarly, it can be used in other aggregate functions at run-time: SELECT MIN(SELECT * FROM Split(@IdList, ','), <fields> FROM Table 1 JOIN Table 2 ON ... JOIN Table 3 ON ... WHERE LOGICAL CONDITION A AND LOGICAL CONDITION B AND LOGICAL CONDITION C GROUP BY <fields> Now that I've (hopefully effectively) explained the benefits to using this function and implementing it in one or more of your database objects, let me warn you of a caveat that you are likely to encounter.  You may have a team member who waits until the right moment to ask you a pointed question: "Doesn't this function just do the same thing as using the IN function?  Why didn't you just use that instead?  In other words, why bother with this function?" What's happening is, one or more team members has failed to understand the reason for implementing this kind of function in the first place.  (Note: this is THE MOST IMPORTANT ASPECT OF THIS POST). Allow me to outline a few pros to implementing this function, so you may effectively parry this question.  Touche. 1) Code consolidation.  You don't have to maintain what is basically the same code and logic, but with varying numbers of the same parameter in several SQL objects.  I'm not going to go into the cons related to using this function, because the afore mentioned team member is probably more than adept at pointing these out.  Remember, the real positive contribution is ou are decreasing the liklihood that your team fails to update all (x) duplicate copies of what are basically the same stored procedure, and so on...  This is the classic downside to duplicate code.  It is a virus, and you should kill it. You might be better off rejecting your team member's question, and responding with your own: "Would you rather maintain the same logic in multiple different stored procedures, and hope that the team doesn't forget to always update all of them at the same time?".  In his head, he might be thinking "yes, I would like to maintain several different copies of the same stored procedure", although you probably will not get such a direct response.  2) Added flexibility - you can use the Split function elsewhere, and for splitting your data in different ways.  Plus, you can use any kind of delimiter you wish.  How can you know today the ways in which you might want to examine your data tomorrow?  Segue to my next point. 3) Because the function takes a delimiter parameter, you can split the data in any number of ways.  This greatly increases the utility of such a function and enables your team to work with the data in a variety of different ways in the future.  You can split on a single char, symbol, word, or group of words.  You can split on spaces.  (The list goes on... test it out). Finally, you can dynamically define the behavior of a stored procedure (or other SQL object) at run time, through the use of this function.  Rather than have several objects that accomplish almost the same thing, why not have only one instead?

  Read the article

• Solaris10 x86 mirror. Making second disk booteable when failure

  - by Kani

  Did a mirror (RAID1) with Solaris 10 in x86. Everything OK. Now, I´m trying to make the second disk booteable, this is: from grub or in case of failure of disk1. I edited /boot/grub/menu.lst: #---------- ADDED BY BOOTADM - DO NOT EDIT ---------- title Solaris 10 9/10 s10x_u9wos_14a X86 findroot (rootfs1,0,a) kernel /platform/i86pc/multiboot module /platform/i86pc/boot_archive #---------------------END BOOTADM-------------------- #---------- ADDED BY BOOTADM - DO NOT EDIT ---------- title Solaris failsafe findroot (rootfs1,0,a) kernel /boot/multiboot -s module /boot/amd64/x86.miniroot-safe #---------------------END BOOTADM-------------------- #---------- ADDED BY BOOTADM - DO NOT EDIT ---------- title Solaris failsafe findroot (rootfs1,0,a) kernel /boot/multiboot kernel/unix -s module /boot/x86.miniroot-safe #---------------------END BOOTADM-------------------- #Make second disk booteable!!!!!!! title alternate boot findroot (rootfs1,1,a) kernel /boot/multiboot kernel/unix -s module /boot/x86.miniroot-safe But is not working. In the BIOS, when I select "alternate boot" I get: Error 15: 15 file not found also, how to configure to GRUB to make the disk2 to boot in case of error in disk1? Additionally, I did (but not related to GRUB): eeprom altbootpath=/devices/pci@0,0/pci108e,5352@1f,2/disk@1,0:a Here is the output of some commands that may help you: /sbin/biosdev 0x80 /pci@0,0/pci108e,5352@1f,2/disk@0,0 0x81 /pci@0,0/pci108e,5352@1f,2/disk@1,0 ls -l /dev/dsk/c1t?d0s0 lrwxrwxrwx 1 root root 50 Jul 7 12:01 /dev/dsk/c1t0d0s0 -> ../../devices/pci@0,0/pci108e,5352@1f,2/disk@0,0:a lrwxrwxrwx 1 root root 50 Jul 7 12:01 /dev/dsk/c1t1d0s0 -> ../../devices/pci@0,0/pci108e,5352@1f,2/disk@1,0:a more /boot/solaris/bootenv.rc setprop ata-dma-enabled '1' setprop atapi-cd-dma-enabled '0' setprop ttyb-rts-dtr-off 'false' setprop ttyb-ignore-cd 'true' setprop ttya-rts-dtr-off 'false' setprop ttya-ignore-cd 'true' setprop ttyb-mode '9600,8,n,1,-' setprop ttya-mode '9600,8,n,1,-' setprop lba-access-ok '1' setprop prealloc-chunk-size '0x2000' setprop bootpath '/pci@0,0/pci108e,5352@1f,2/disk@0,0:a' setprop keyboard-layout 'US-English' setprop console 'text' setprop altbootpath '/pci@0,0/pci108e,5352@1f,2/disk@1,0:a' cat /etc/vfstab #device device mount FS fsck mount mount #to mount to fsck point type pass at boot options # fd - /dev/fd fd - no - /proc - /proc proc - no - #/dev/dsk/c1t0d0s1 - - swap - no - /dev/md/dsk/d1 - - swap - no - /dev/md/dsk/d0 /dev/md/rdsk/d0 / ufs 1 no - /devices - /devices devfs - no - sharefs - /etc/dfs/sharetab sharefs - no - ctfs - /system/contract ctfs - no - objfs - /system/object objfs - no - swap - /tmp tmpfs - yes - df -h Filesystem size used avail capacity Mounted on /dev/md/dsk/d0 909G 11G 889G 2% / /devices 0K 0K 0K 0% /devices ctfs 0K 0K 0K 0% /system/contract proc 0K 0K 0K 0% /proc mnttab 0K 0K 0K 0% /etc/mnttab swap 14G 972K 14G 1% /etc/svc/volatile objfs 0K 0K 0K 0% /system/object sharefs 0K 0K 0K 0% /etc/dfs/sharetab /usr/lib/libc/libc_hwcap1.so.1 909G 11G 889G 2% /lib/libc.so.1 fd 0K 0K 0K 0% /dev/fd swap 14G 40K 14G 1% /tmp swap 14G 28K 14G 1% /var/run

  Read the article

• SQL SERVER – DMV sys.dm_exec_describe_first_result_set_for_object – Describes the First Result Metadata for the Module

  - by pinaldave

  Here is another interesting follow up blog post of SQL SERVER – sp_describe_first_result_set New System Stored Procedure in SQL Server 2012. While I was writing earlier blog post I had come across DMV sys.dm_exec_describe_first_result_set_for_object as well. I found that SQL Server 2012 is providing all this quick and new features which quite often we miss  to learn it and when in future someone demonstrates the same to us, we express our surprise on the subject. DMV sys.dm_exec_describe_first_result_set_for_object returns result set which describes the columns used in the stored procedure. Here is the quick example. Let us first create stored procedure. USE [AdventureWorks] GO ALTER PROCEDURE [dbo].[CompSP] AS SELECT [DepartmentID] id ,[Name] n ,[GroupName] gn FROM [HumanResources].[Department] GO Now let us run following two DMV which gives us meta data description of the stored procedure passed as a parameter. Option1: Pass second parameter @include_browse_information as a 0. SELECT * FROM sys.dm_exec_describe_first_result_set_for_object ( OBJECT_ID('[dbo].[CompSP]'),0) AS Table1 GO Option2: Pass second parameter @include_browse_information as a 1. SELECT * FROM sys.dm_exec_describe_first_result_set_for_object ( OBJECT_ID('[dbo].[CompSP]'),1) AS Table1 GO Here is the result of Option1 and Option2. If you see the result, there is absolutely no difference between the results. Both of the resultset are returning column names which are aliased in the stored procedure. Let us scroll on the right side and you will notice that there is clear difference in some columns. You will see in second resultset source_database, Source_schema as well few other columns are reporting original table instead of NULL values. When @include_browse_information result is set to 1 it will provide the columns details of the underlying table. I have just discovered this DMV, I have yet to use it in production code and find out where exactly I will use this DMV. Do you have any idea? Does any thing comes up to your mind where this DMV can be helpful. Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: PostADay, SQL, SQL Authority, SQL DMV, SQL Query, SQL Server, SQL Tips and Tricks, T SQL, Technology

  Read the article

• prevent filesystem from entering read-only mode

  - by user788171

  I have found that my server's filesystem is continuously entering read-only mode. There have been some issues with the raid1 array, but I have removed the bad disk from the array. However, it is still physically plugged into the system because I haven't had a chance to go over to the datacentre, I suspect udev and the system kernel is still picking up the bad disk and throwing errors. In /var/log/messages, there are errors like this: Mar 2 06:53:14 nocloud kernel: ata1: exception Emask 0x10 SAct 0x0 SErr 0x4010000 action 0xe frozen Mar 2 06:53:14 nocloud kernel: ata1: irq_stat 0x00400040, connection status changed Mar 2 06:53:14 nocloud kernel: ata1: SError: { PHYRdyChg DevExch } Mar 2 06:53:14 nocloud kernel: ata1: hard resetting link Mar 2 06:53:20 nocloud kernel: ata1: link is slow to respond, please be patient (ready=0) Mar 2 06:53:21 nocloud kernel: ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) Mar 2 06:53:21 nocloud kernel: ata1.00: configured for UDMA/133 Mar 2 06:53:21 nocloud kernel: ata1: EH complete This happens fairly randomly throughout the day until eventually the filesystem becomes read-only. When this happens, my system becomes non-operational which kind of defeats the purpose of having a raid1. Note, ata1 is the bad disk (I think ata1 corresponds to /dev/sda because they are both first in line). Under mdadm, /dev/sda1,2 is no longer being used, but I can't prevent the system kernel from continuing to query that disk when I am no longer using it and throwing these errors. Is there a way to prevent my filesystem from automatically going into read-only mode? Furthermore, is it safe to do so? Thanks in advance. EDIT: Additional information: output from cat /proc/mdstat md1 : active raid1 sdb2[1] 976554876 blocks super 1.1 [2/1] [_U] bitmap: 5/8 pages [20KB], 65536KB chunk md0 : active raid1 sdb1[1] 204788 blocks super 1.0 [2/1] [_U] Output from mount: /dev/mapper/VolGroup-LogVol00 on / type ext4 (rw,noatime) proc on /proc type proc (rw) sysfs on /sys type sysfs (rw) devpts on /dev/pts type devpts (rw,gid=5,mode=620) tmpfs on /dev/shm type tmpfs (rw,rootcontext="system_u:object_r:tmpfs_t:s0") /dev/md0 on /boot type ext4 (rw) none on /proc/sys/fs/binfmt_misc type binfmt_misc (rw) sunrpc on /var/lib/nfs/rpc_pipefs type rpc_pipefs (rw) EDIT2: pvdisplay output: --- Physical volume --- PV Name /dev/md1 VG Name VolGroup PV Size 931.32 GiB / not usable 2.87 MiB Allocatable yes (but full) PE Size 16.00 MiB Total PE 59604 Free PE 0 Allocated PE 59604

  Read the article

• SQL University: What and why of database refactoring

  - by Mladen Prajdic

  This is a post for a great idea called SQL University started by Jorge Segarra also famously known as SqlChicken on Twitter. It’s a collection of blog posts on different database related topics contributed by several smart people all over the world. So this week is mine and we’ll be talking about database testing and refactoring. In 3 posts we’ll cover: SQLU part 1 - What and why of database testing SQLU part 2 - What and why of database refactoring SQLU part 3 - Tools of the trade This is a second part of the series and in it we’ll take a look at what database refactoring is and why do it. Why refactor a database To know why refactor we first have to know what refactoring actually is. Code refactoring is a process where we change module internals in a way that does not change that module’s input/output behavior. For successful refactoring there is one crucial thing we absolutely must have: Tests. Automated unit tests are the only guarantee we have that we haven’t broken the input/output behavior before refactoring. If you haven’t go back ad read my post on the matter. Then start writing them. Next thing you need is a code module. Those are views, UDFs and stored procedures. By having direct table access we can kiss fast and sweet refactoring good bye. One more point to have a database abstraction layer. And no, ORM’s don’t fall into that category. But also know that refactoring is NOT adding new functionality to your code. Many have fallen into this trap. Don’t be one of them and resist the lure of the dark side. And it’s a strong lure. We developers in general love to add new stuff to our code, but hate fixing our own mistakes or changing existing code for no apparent reason. To be a good refactorer one needs discipline and focus. Now we know that refactoring is all about changing inner workings of existing code. This can be due to performance optimizations, changing internal code workflows or some other reason. This is a typical black box scenario to the outside world. If we upgrade the car engine it still has to drive on the road (preferably faster) and not fly (no matter how cool that would be). Also be aware that white box tests will break when we refactor. What to refactor in a database Refactoring databases doesn’t happen that often but when it does it can include a lot of stuff. Let us look at a few common cases. Adding or removing database schema objects Adding, removing or changing table columns in any way, adding constraints, keys, etc… All of these can be counted as internal changes not visible to the data consumer. But each of these carries a potential input/output behavior change. Dropping a column can result in views not working anymore or stored procedure logic crashing. Adding a unique constraint shows duplicated data that shouldn’t exist. Foreign keys break a truncate table command executed from an application that runs once a month. All these scenarios are very real and can happen. With the proper database abstraction layer fully covered with black box tests we can make sure something like that does not happen (hopefully at all). Changing physical structures Physical structures include heaps, indexes and partitions. We can pretty much add or remove those without changing the data returned by the database. But the performance can be affected. So here we use our performance tests. We do have them, right? Just by adding a single index we can achieve orders of magnitude performance improvement. Won’t that make users happy? But what if that index causes our write operations to crawl to a stop. again we have to test this. There are a lot of things to think about and have tests for. Without tests we can’t do successful refactoring! Fixing bad code We all have some bad code in our systems. We usually refer to that code as code smell as they violate good coding practices. Examples of such code smells are SQL injection, use of SELECT *, scalar UDFs or cursors, etc… Each of those is huge code smell and can result in major code changes. Take SELECT * from example. If we remove a column from a table the client using that SELECT * statement won’t have a clue about that until it runs. Then it will gracefully crash and burn. Not to mention the widely unknown SELECT * view refresh problem that Tomas LaRock (@SQLRockstar on Twitter) and Colin Stasiuk (@BenchmarkIT on Twitter) talk about in detail. Go read about it, it’s informative. Refactoring this includes replacing the * with column names and most likely change to application using the database. Breaking apart huge stored procedures Have you ever seen seen a stored procedure that was 2000 lines long? I have. It’s not pretty. It hurts the eyes and sucks the will to live the next 10 minutes. They are a maintenance nightmare and turn into things no one dares to touch. I’m willing to bet that 100% of time they don’t have a single test on them. Large stored procedures (and functions) are a clear sign that they contain business logic. General opinion on good database coding practices says that business logic has no business in the database. That’s the applications part. Refactoring such behemoths requires writing lots of edge case tests for the stored procedure input/output behavior and then start to refactor it. First we split the logic inside into smaller parts like new stored procedures and UDFs. Those then get called from the master stored procedure. Once we’ve successfully modularized the database code it’s best to transfer that logic into the applications consuming it. This only leaves the stored procedure with common data manipulation logic. Of course this isn’t always possible so having a plethora of performance and behavior unit tests is absolutely necessary to confirm we’ve actually improved the codebase in some way.   Refactoring is not a popular chore amongst developers or managers. The former don’t like fixing old code, the latter can’t see the financial benefit. Remember how we talked about being lousy at estimating future costs in the previous post? But there comes a time when it must be done. Hopefully I’ve given you some ideas how to get started. In the last post of the series we’ll take a look at the tools to use and an example of testing and refactoring.

  Read the article

• SQL SERVER – Weekly Series – Memory Lane – #037

  - by Pinal Dave

  Here is the list of selected articles of SQLAuthority.com across all these years. Instead of just listing all the articles I have selected a few of my most favorite articles and have listed them here with additional notes below it. Let me know which one of the following is your favorite article from memory lane. 2007 Convert Text to Numbers (Integer) – CAST and CONVERT If table column is VARCHAR and has all the numeric values in it, it can be retrieved as Integer using CAST or CONVERT function. List All Stored Procedure Modified in Last N Days If SQL Server suddenly start behaving in un-expectable behavior and if stored procedure were changed recently, following script can be used to check recently modified stored procedure. If a stored procedure was created but never modified afterwards modified date and create a date for that stored procedure are same. Count Duplicate Records – Rows Validate Field For DATE datatype using function ISDATE() We always checked DATETIME field for incorrect data type. One of the user input date as 30/2/2007. The date was sucessfully inserted in the temp table but while inserting from temp table to final table it crashed with error. We had now task to validate incorrect date value before we insert in final table. Jr. Developer asked me how can he do that? We check for incorrect data type (varchar, int, NULL) but this is incorrect date value. Regular expression works fine with them because of mm/dd/yyyy format. 2008 Find Space Used For Any Particular Table It is very simple to find out the space used by any table in the database. Two Convenient Features Inline Assignment – Inline Operations Here is the script which does both – Inline Assignment and Inline Operation DECLARE @idx INT = 0 SET @idx+=1 SELECT @idx Introduction to SPARSE Columns SPARSE column are better at managing NULL and ZERO values in SQL Server. It does not take any space in database at all. If column is created with SPARSE clause with it and it contains ZERO or NULL it will be take lesser space then regular column (without SPARSE clause). SP_CONFIGURE – Displays or Changes Global Configuration Settings If advanced settings are not enabled at configuration level SQL Server will not let user change the advanced features on server. Authorized user can turn on or turn off advance settings. 2009 Standby Servers and Types of Standby Servers Standby Server is a type of server that can be brought online in a situation when Primary Server goes offline and application needs continuous (high) availability of the server. There is always a need to set up a mechanism where data and objects from primary server are moved to secondary (standby) server. BLOB – Pointer to Image, Image in Database, FILESTREAM Storage When it comes to storing images in database there are two common methods. I had previously blogged about the same subject on my visit to Toronto. With SQL Server 2008, we have a new method of FILESTREAM storage. However, the answer on when to use FILESTREAM and when to use other methods is still vague in community. 2010 Upper Case Shortcut SQL Server Management Studio I select the word and hit CTRL+SHIFT+U and it SSMS immediately changes the case of the selected word. Similar way if one want to convert cases to lower case, another short cut CTRL+SHIFT+L is also available. The Self Join – Inner Join and Outer Join Self Join has always been a noteworthy case. It is interesting to ask questions about self join in a room full of developers. I often ask – if there are three kinds of joins, i.e.- Inner Join, Outer Join and Cross Join; what type of join is Self Join? The usual answer is that it is an Inner Join. However, the reality is very different. Parallelism – Row per Processor – Row per Thread – Thread 0  If you look carefully in the Properties window or XML Plan, there is “Thread 0?. What does this “Thread 0” indicate? Well find out from the blog post. How do I Learn and How do I Teach The blog post has raised three very interesting questions. How do you learn? How do you teach? What are you learning or teaching? Let me try to answer the same. 2011 SQL SERVER – Interview Questions and Answers – Frequently Asked Questions – Day 7 of 31 What are Different Types of Locks? What are Pessimistic Lock and Optimistic Lock? When is the use of UPDATE_STATISTICS command? What is the Difference between a HAVING clause and a WHERE clause? What is Connection Pooling and why it is Used? What are the Properties and Different Types of Sub-Queries? What are the Authentication Modes in SQL Server? How can it be Changed? SQL SERVER – Interview Questions and Answers – Frequently Asked Questions – Day 8 of 31 Which Command using Query Analyzer will give you the Version of SQL Server and Operating System? What is an SQL Server Agent? Can a Stored Procedure call itself or a Recursive Stored Procedure? How many levels of SP nesting is possible? What is Log Shipping? Name 3 ways to get an Accurate Count of the Number of Records in a Table? What does it mean to have QUOTED_IDENTIFIER ON? What are the Implications of having it OFF? What is the Difference between a Local and a Global Temporary Table? What is the STUFF Function and How Does it Differ from the REPLACE Function? What is PRIMARY KEY? What is UNIQUE KEY Constraint? What is FOREIGN KEY? SQL SERVER – Interview Questions and Answers – Frequently Asked Questions – Day 9 of 31 What is CHECK Constraint? What is NOT NULL Constraint? What is the difference between UNION and UNION ALL? What is B-Tree? How to get @@ERROR and @@ROWCOUNT at the Same Time? What is a Scheduled Job or What is a Scheduled Task? What are the Advantages of Using Stored Procedures? What is a Table Called, if it has neither Cluster nor Non-cluster Index? What is it Used for? Can SQL Servers Linked to other Servers like Oracle? What is BCP? When is it Used? SQL SERVER – Interview Questions and Answers – Frequently Asked Questions – Day 10 of 31 What Command do we Use to Rename a db, a Table and a Column? What are sp_configure Commands and SET Commands? How to Implement One-to-One, One-to-Many and Many-to-Many Relationships while Designing Tables? What is Difference between Commit and Rollback when Used in Transactions? What is an Execution Plan? When would you Use it? How would you View the Execution Plan? SQL SERVER – Interview Questions and Answers – Frequently Asked Questions – Day 11 of 31 What is Difference between Table Aliases and Column Aliases? Do they Affect Performance? What is the difference between CHAR and VARCHAR Datatypes? What is the Difference between VARCHAR and VARCHAR(MAX) Datatypes? What is the Difference between VARCHAR and NVARCHAR datatypes? Which are the Important Points to Note when Multilanguage Data is Stored in a Table? How to Optimize Stored Procedure Optimization? What is SQL Injection? How to Protect Against SQL Injection Attack? How to Find Out the List Schema Name and Table Name for the Database? What is CHECKPOINT Process in the SQL Server? SQL SERVER – Interview Questions and Answers – Frequently Asked Questions – Day 12 of 31 How does Using a Separate Hard Drive for Several Database Objects Improves Performance Right Away? How to Find the List of Fixed Hard Drive and Free Space on Server? Why can there be only one Clustered Index and not more than one? What is Difference between Line Feed (\n) and Carriage Return (\r)? Is It Possible to have Clustered Index on Separate Drive From Original Table Location? What is a Hint? How to Delete Duplicate Rows? Why the Trigger Fires Multiple Times in Single Login? 2012 CTRL+SHIFT+] Shortcut to Select Code Between Two Parenthesis Shortcut key is CTRL+SHIFT+]. This key can be very useful when dealing with multiple subqueries, CTE or query with multiple parentheses. When exercised this shortcut key it selects T-SQL code between two parentheses. Monday Morning Puzzle – Query Returns Results Sometimes but Not Always I am beginner with SQL Server. I have one query, it sometime returns a result and sometime it does not return me the result. Where should I start looking for a solution and what kind of information I should send to you so you can help me with solving. I have no clue, please guide me. Remove Debug Button in SSMS – SQL in Sixty Seconds #020 – Video Effect of Case Sensitive Collation on Resultset Collation is a very interesting concept but I quite often see it is heavily neglected. I have seen developer and DBA looking for a workaround to fix collation error rather than understanding if the side effect of the workaround. Switch Between Two Parenthesis using Shortcut CTRL+] Earlier this week I wrote a blog post about CTRL+SHIFT+] Shortcut to Select Code Between Two Parenthesis, I received quite a lot of positive feedback from readers. If you are a regular reader of the blog post, you must be aware that I appreciate the learning shared by readers. Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: Memory Lane, PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, T SQL, Technology

  Read the article

• SSDT gotcha – Moving a file erases code analysis suppressions

  - by jamiet

  I discovered a little wrinkle in SSDT today that is worth knowing about if you are managing your database schemas using SSDT. In short, if a file is moved to a different folder in the project then any code analysis suppressions that reference that file will disappear from the suppression file. This makes sense if you think about it because the paths stored in the suppression file are no longer valid, but you probably won’t be aware of it until it happens to you. If you don’t know what code analysis is or you don’t know what the suppression file is then you can probably stop reading now, otherwise read on for a simple short demo. Let’s create a new project and add a stored procedure to it called sp_dummy. Naming stored procedures with a sp_ prefix is generally frowned upon and hence SSDT static code analysis will look for occurrences of this and flag them. So, the next thing we need to do is turn on static code analysis in the project properties: A subsequent build causes a code analysis warning as we might expect: Let’s suppose we actually don’t mind stored procedures with sp_ prefixes, we can just right-click on the message to suppress and get rid of it: That causes a suppression file to get created in our project: Notice that the suppression file contains a relative path to the file that has had the suppression placed upon it. Now if we simply move the file within our project to a new folder notice that the suppression that we just created gets removed from the suppression file: As I alluded above this behaviour is intuitive because the path originally stored in the suppression file is no longer relevant but you’re probably not going to be aware of it until it happens to you and messages that you thought you had suppressed start appearing again. Definitely one to be aware of. @Jamiet   

  Read the article

• How do I reinstate my admin user privileges to global read/write

  - by Matt

  I am running Ubuntu 12.04 LTS. I only have the one user which I created when I installed Ubuntu. Everything has been fine - love it - until I updated a software package recently from the command line using sudo (not gksudo). I was having a little bother which did not make sense to me and in a fluff changed my user read/write privileges through the GUI (not even clear how I got there!). After restart I was stuck in a login loop - using the right login password but kept getting looped back to the login and could only login as Guest. I could still login with my user/password via ctrl + alt + f1 Eventually I was able to login again at start up. Not sure exactly what it was I changed that worked but it was one of/or a combination of installing latest security updates, changing login manager from LightDM to DGM and back again, removing the ICE/Xauthority and chown user. Current dilemma is my primary admin user privileges were read only. In the command line ls -ls /home/user returned this value: drwx------ 48 username username 20480 I have since changed this using sudo chmod 0755 /home/username (from my limited understanding 755 should return my user privileges to their original read/write glory). ls -ld /home/user currently shows my user privileges as: drwxr-xr-x 48 username username 20480 I still seem to have only read access permissions. I've been through lots of threads (and the help file) that talk about creating new users/groups permissions etc. but specific info on returning my existing global/admin/primary users privileges to what they were when I first created that user - baffling me. I feel this is something really simple I'm just not getting it. Please help! sudo mount /dev/sda1 on / type ext4 (rw,errors=remount-ro) proc on /proc type proc (rw,noexec,nosuid,nodev) sysfs on /proc type sysfs (rw,noexec,nosuid,nodev) none on /sys/fs/fuse/connections type fusect1 (rw) none on /sys/kernel/debug type debugfs (rw) none on /sys/kernel/security type securityfs (rw) udev on /dev type devtmpfs (rw,mode=07pe tmpfs55) devpts on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=0620) tmpfs on /run type tmpfs (rw,noexec,nosuid,size=10%,mode=0755) none on /run/lock type tmpfs (rw, ,nosuid,nodev,size=5242880 none on /run/shm type tmpfs (rw,nosuid,nodev) gvfs-fuse-daemon on /home/meng/.gvfs type fuse.gvfs-fuse-daemon (rw,nosuid,nodev,user=meng) none on /tmp/guest-1R2Fi5 type tmpsf (rw,mode=700)

  Read the article

• Algorithm for tracking progress of controller method running in background

  - by SilentAssassin

  I am using Codeigniter framework for PHP on Windows platform. My problem is I am trying to track progress of a controller method running in background. The controller extracts data from the database(MySQL) then does some processing and then stores the results again in the database. The complete aforesaid process can be considered as a single task. A new task can be assigned while another task is running. The newly assigned task will be added in a queue. So if I can track progress of the controller, I can show status for each of these tasks. Like I can show "Pending" status for tasks in the queue, "In Progress" for tasks running and "Done" for tasks that are completed. Main Issue: Now first thing I need to find is an algorithm to track the progress of how much amount of execution the controller method has completed and that means tracking how much amount of method has completed execution. For instance, this PHP script tracks progress of array being counted. Here the current state and state after total execution are known so it is possible to track its progress. But I am not able to devise anything analogous to it in my case. Maybe what I am trying to achieve is programmtically not possible. If its not possible then suggest me a workaround or a completely new approach. If some details are pending you can mention them. Sorry for my ignorance this is my first post here. I welcome you to point out my mistakes. EDIT: Database outline: The URL(s) and keyword(s) are first entered by user which are stored in a database table called link_master and keyword_master respectively. Then keywords are extracted from all the links present in this table and compared with keywords entered by user and their frequency is calculated which is the final result. And the results are stored in another table called link_result. Now sub-links are extracted from the domain links and stored in a table called sub_link_master. Now again the keywords are extracted from these sub-links and the corresponding results are stored in a table called sub_link_result. The number of records cannot be defined beforehand as the number of links on any web page can be different. Only the cardinality of *link_result* table can be known which will be equal to multiplication of number of keyword(s) and URL(s) . I insert multiple records at a time using this resource. Controller outline: The controller extracts keywords from a web page and also extracts keywords from all the links present on that page. There is a method called crawlLink. I used Rolling Curl to extract keywords and web page content. It has callback function which I used for extracting keywords alongwith generating results and extracting valid sub-links. There is a insertResult method which stores results for links and sub-links in the respective tables. Yes, the processing depends on the number of records. The more the number of records, the more time it takes to execute: Consider this scenario: Number of Domain Links = 1 Number of Keywords = 3 Number of Domain Links Result generated = 3 (3 x 1 as described in the question) Number of Sub Links generated = 41 Number of Sub Links Result = 117 (41 x 3 = 123 but some links are not valid or searchable) Approximate time taken for above process to complete = 55 seconds. The above result is for a single link. I want to track the progress of the above results getting stored in database. When all results are stored, the task is complete. If results are getting stored, the task is In Progress. I am not clear how can I track this progress.

  Read the article

• Ubuntu missing from the Grub menu

  - by varevarao

  Recently I've had some audio issues with Ubuntu (using precise), and in the process of trying to resolve that I ran a dist-upgrade. Everything went just fine, and the sound seemed good, until I rebooted my machine for the first time since the dist-upgrade. All I see now in the Grub menu at startup is memtest86+, another memtest variant, and Windows 7. It's not showing any of the linux kernels that Ubuntu is running on. I am attaching my bootinfoscript: Boot Info Script 0.61.full + Boot-Repair extra info [Boot-Info November 20th 2012] ============================= Boot Info Summary: =============================== => Grub2 (v1.99) is installed in the MBR of /dev/sda and looks at sector 1 of the same hard drive for core.img. core.img is at this location and looks for (,msdos6)/boot/grub on this drive. sda1: __________________________________________________________________________ File system: vfat Boot sector type: Dell Utility: FAT16 Boot sector info: No errors found in the Boot Parameter Block. Operating System: Boot files: sda2: __________________________________________________________________________ File system: ntfs Boot sector type: Windows Vista/7: NTFS Boot sector info: No errors found in the Boot Parameter Block. Operating System: Boot files: sda3: __________________________________________________________________________ File system: ntfs Boot sector type: Windows Vista/7: NTFS Boot sector info: No errors found in the Boot Parameter Block. Operating System: Windows 7 Boot files: sda4: __________________________________________________________________________ File system: Extended Partition Boot sector type: Unknown Boot sector info: sda5: __________________________________________________________________________ File system: ntfs Boot sector type: Windows Vista/7: NTFS Boot sector info: According to the info in the boot sector, sda5 starts at sector 2048. Operating System: Boot files: sda6: __________________________________________________________________________ File system: ext4 Boot sector type: Grub2 (v1.99-2.00) Boot sector info: Grub2 (v1.99) is installed in the boot sector of sda6 and looks at sector 220046240 of the same hard drive for core.img. core.img is at this location and looks for (,msdos6)/boot/grub on this drive. Operating System: Ubuntu 12.04.1 LTS Boot files: /boot/grub/grub.cfg /etc/fstab /boot/grub/core.img sda7: __________________________________________________________________________ File system: swap Boot sector type: - Boot sector info: ============================ Drive/Partition Info: ============================= Drive: sda _____________________________________________________________________ Disk /dev/sda: 320.1 GB, 320072933376 bytes 255 heads, 63 sectors/track, 38913 cylinders, total 625142448 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes Partition Boot Start Sector End Sector # of Sectors Id System /dev/sda1 63 273,104 273,042 de Dell Utility /dev/sda2 * 274,432 19,406,847 19,132,416 7 NTFS / exFAT / HPFS /dev/sda3 19,406,848 218,274,364 198,867,517 7 NTFS / exFAT / HPFS /dev/sda4 218,275,838 625,139,711 406,863,874 f W95 Extended (LBA) /dev/sda5 328,630,272 625,139,711 296,509,440 7 NTFS / exFAT / HPFS /dev/sda6 218,275,840 324,030,463 105,754,624 83 Linux /dev/sda7 324,032,512 328,626,175 4,593,664 82 Linux swap / Solaris "blkid" output: ________________________________________________________________ Device UUID TYPE LABEL /dev/loop0 squashfs /dev/sda1 07DA-0512 vfat DellUtility /dev/sda2 8834146034145392 ntfs RECOVERY /dev/sda3 48E2189DE21890F4 ntfs OS /dev/sda5 BC2A44C02A447982 ntfs Varshneya /dev/sda6 34731459-4b0f-46ac-a9bf-cb360a2c947c ext4 /dev/sda7 dcb9ce9b-799a-4c65-b008-887b01775670 swap /dev/sr0 iso9660 Ubuntu 12.04.1 LTS i386 ================================ Mount points: ================================= Device Mount_Point Type Options /dev/loop0 /rofs squashfs (ro,noatime) /dev/sda6 /mnt ext4 (rw) /dev/sr0 /cdrom iso9660 (ro,noatime) =========================== sda6/boot/grub/grub.cfg: =========================== -------------------------------------------------------------------------------- # # DO NOT EDIT THIS FILE # # It is automatically generated by grub-mkconfig using templates # from /etc/grub.d and settings from /etc/default/grub # ### BEGIN /etc/grub.d/00_header ### if [ -s $prefix/grubenv ]; then set have_grubenv=true load_env fi set default="0" if [ "${prev_saved_entry}" ]; then set saved_entry="${prev_saved_entry}" save_env saved_entry set prev_saved_entry= save_env prev_saved_entry set boot_once=true fi function savedefault { if [ -z "${boot_once}" ]; then saved_entry="${chosen}" save_env saved_entry fi } function recordfail { set recordfail=1 if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi } function load_video { insmod vbe insmod vga insmod video_bochs insmod video_cirrus } insmod part_msdos insmod ext2 set root='(hd0,msdos6)' search --no-floppy --fs-uuid --set=root 34731459-4b0f-46ac-a9bf-cb360a2c947c if loadfont /boot/grub/unicode.pf2 ; then set gfxmode=auto load_video insmod gfxterm insmod part_msdos insmod ext2 set root='(hd0,msdos6)' search --no-floppy --fs-uuid --set=root 34731459-4b0f-46ac-a9bf-cb360a2c947c set locale_dir=($root)/boot/grub/locale set lang=en_US insmod gettext fi terminal_output gfxterm if [ "${recordfail}" = 1 ]; then set timeout=-1 else set timeout=10 fi ### END /etc/grub.d/00_header ### ### BEGIN /etc/grub.d/05_debian_theme ### set menu_color_normal=white/black set menu_color_highlight=black/light-gray ### END /etc/grub.d/05_debian_theme ### ### BEGIN /etc/grub.d/10_linux ### function gfxmode { set gfxpayload="${1}" if [ "${1}" = "keep" ]; then set vt_handoff=vt.handoff=7 else set vt_handoff= fi } if [ "${recordfail}" != 1 ]; then if [ -e ${prefix}/gfxblacklist.txt ]; then if hwmatch ${prefix}/gfxblacklist.txt 3; then if [ ${match} = 0 ]; then set linux_gfx_mode=keep else set linux_gfx_mode=text fi else set linux_gfx_mode=text fi else set linux_gfx_mode=keep fi else set linux_gfx_mode=text fi export linux_gfx_mode if [ "${linux_gfx_mode}" != "text" ]; then load_video; fi ### END /etc/grub.d/10_linux ### ### BEGIN /etc/grub.d/20_linux_xen ### ### END /etc/grub.d/20_linux_xen ### ### BEGIN /etc/grub.d/20_memtest86+ ### menuentry "Memory test (memtest86+)" { insmod part_msdos insmod ext2 set root='(hd0,msdos6)' search --no-floppy --fs-uuid --set=root 34731459-4b0f-46ac-a9bf-cb360a2c947c linux16 /boot/memtest86+.bin } menuentry "Memory test (memtest86+, serial console 115200)" { insmod part_msdos insmod ext2 set root='(hd0,msdos6)' search --no-floppy --fs-uuid --set=root 34731459-4b0f-46ac-a9bf-cb360a2c947c linux16 /boot/memtest86+.bin console=ttyS0,115200n8 } ### END /etc/grub.d/20_memtest86+ ### ### BEGIN /etc/grub.d/30_os-prober ### menuentry "Windows 7 (loader) (on /dev/sda2)" --class windows --class os { insmod part_msdos insmod ntfs set root='(hd0,msdos2)' search --no-floppy --fs-uuid --set=root 8834146034145392 chainloader +1 } ### END /etc/grub.d/30_os-prober ### ### BEGIN /etc/grub.d/40_custom ### # This file provides an easy way to add custom menu entries. Simply type the # menu entries you want to add after this comment. Be careful not to change # the 'exec tail' line above. ### END /etc/grub.d/40_custom ### ### BEGIN /etc/grub.d/41_custom ### if [ -f $prefix/custom.cfg ]; then source $prefix/custom.cfg; fi ### END /etc/grub.d/41_custom ### -------------------------------------------------------------------------------- =============================== sda6/etc/fstab: ================================ -------------------------------------------------------------------------------- # /etc/fstab: static file system information. # # Use 'blkid -o value -s UUID' to print the universally unique identifier # for a device; this may be used with UUID= as a more robust way to name # devices that works even if disks are added and removed. See fstab(5). # # <file system> <mount point> <type> <options> <dump> <pass> proc /proc proc nodev,noexec,nosuid 0 0 # / was on /dev/sda6 during installation UUID=34731459-4b0f-46ac-a9bf-cb360a2c947c / ext4 errors=remount-ro,user_xattr 0 1 # swap was on /dev/sda7 during installation UUID=dcb9ce9b-799a-4c65-b008-887b01775670 none swap sw 0 0 -------------------------------------------------------------------------------- =================== sda6: Location of files loaded by Grub: ==================== GiB - GB File Fragment(s) 104.851909637 = 112.583880704 boot/grub/core.img 1 121.191410065 = 130.128285696 boot/grub/grub.cfg 1 ======================== Unknown MBRs/Boot Sectors/etc: ======================== Unknown BootLoader on sda4 00000000 eb 0f 2a 5d f4 b7 75 f2 e9 56 12 b8 50 b4 79 ec |..*]..u..V..P.y.| 00000010 89 91 ca c3 16 40 31 d0 ae c4 53 3d c7 dd d7 98 |[email protected]=....| 00000020 bd a4 f2 a4 e8 ab fc ea 36 30 1b 34 cf 8a 28 30 |........60.4..(0| 00000030 43 95 6c 31 3e 76 93 58 84 37 99 c3 ae 3a 88 a3 |C.l1>v.X.7...:..| 00000040 c2 a6 36 2a f8 e0 e1 03 91 8d a1 50 cd ad b0 b5 |..6*.......P....| 00000050 ad 69 3a 49 63 1f 4a 33 97 6e 0c 71 bf 7d bd 35 |.i:Ic.J3.n.q.}.5| 00000060 86 c5 17 93 b4 9f e5 af e0 c4 6f f4 6f f9 4b dd |..........o.o.K.| 00000070 14 39 e2 9e b9 36 ca b1 56 5b d9 b1 66 2c 05 b2 |.9...6..V[..f,..| 00000080 5d 5b 99 c0 db e6 81 27 ab c2 e1 55 00 ac 0b 2c |][.....'...U...,| 00000090 24 d3 8e 54 b0 3d ab 58 e4 23 fc 3a 79 93 fb 5e |$..T.=.X.#.:y..^| 000000a0 94 5a 3a c2 16 4e 56 cb 1b 7f 7e b3 4c 38 ca 5b |.Z:..NV...~.L8.[| 000000b0 ca ab c1 2c 2a 64 e7 77 fe 2a ba ee 08 33 b5 9b |...,*d.w.*...3..| 000000c0 d0 c2 b4 a8 fc 73 4f 01 fd 03 61 75 eb 6d 1a 74 |.....sO...au.m.t| 000000d0 5f 79 31 7f ed e6 f5 99 21 36 16 ed 25 d9 6d 2b |_y1.....!6..%.m+| 000000e0 5f f4 42 b8 9d 01 89 10 fe df a4 98 e7 ab ab ea |_.B.............| 000000f0 1d 1c 44 e1 49 d9 19 c9 ab f5 41 eb 4a 32 c2 39 |..D.I.....A.J2.9| 00000100 87 57 f6 f6 f3 b5 4d 17 72 f2 b1 16 19 aa ec 24 |.W....M.r......$| 00000110 39 bd e3 b1 68 b3 b0 7f fa 2a 3a 2e 99 ed db 8a |9...h....*:.....| 00000120 f8 61 b4 ef 9d 7d 85 95 ed ad eb 9e 71 f4 27 d3 |.a...}......q.'.| 00000130 f3 04 8b 8a 69 98 02 72 df e1 f9 83 27 5b 01 4c |....i..r....'[.L| 00000140 d4 9a b9 3b db ca 1e 40 35 db 6f c1 52 c0 7f 27 |...;[email protected]..'| 00000150 8a 1d bc 34 89 24 b6 e3 fd ec a1 2a e5 9e d1 8f |...4.$.....*....| 00000160 77 e0 d5 52 c0 4c c4 38 38 3c 28 19 bf 20 f0 03 |w..R.L.88<(.. ..| 00000170 38 a4 b1 b5 ed 6a b8 f7 a9 7b 65 b1 7b 64 4a 33 |8....j...{e.{dJ3| 00000180 66 1a 60 29 38 1d 5b 52 40 31 de a5 0c 0f cc 6f |f.`)8.[[email protected]| 00000190 dd 31 6d 3d f0 2a 32 85 67 66 ca 4f 02 aa 0d 30 |.1m=.*2.gf.O...0| 000001a0 66 c9 b2 33 c2 4b 8a fa 3c 7b 52 02 00 88 8e cf |f..3.K..<{R.....| 000001b0 67 1e d4 20 49 1d 1a b8 71 ad c2 d4 37 9d 00 fe |g.. I...q...7...| 000001c0 ff ff 07 fe ff ff 02 e0 93 06 00 60 ac 11 00 fe |...........`....| 000001d0 ff ff 05 fe ff ff 01 00 00 00 01 b0 4d 06 00 00 |............M...| 000001e0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 000001f0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 55 aa |..............U.| 00000200 ADDITIONAL INFORMATION : =================== log of boot-repair 2012-11-24__09h45 =================== boot-repair version : 3.195~ppa2~precise boot-sav version : 3.195~ppa2~precise glade2script version : 3.2.2~ppa45~precise boot-sav-extra version : 3.195~ppa2~precise boot-repair is executed in live-session (Ubuntu 12.04.1 LTS, precise, Ubuntu, i686) CPU op-mode(s): 32-bit, 64-bit file=/cdrom/preseed/ubuntu.seed boot=casper initrd=/casper/initrd.lz quiet splash -- =================== os-prober: /dev/sda2:Windows 7 (loader):Windows:chain /dev/sda6:Ubuntu 12.04.1 LTS (12.04):Ubuntu:linux =================== blkid: /dev/sda1: SEC_TYPE="msdos" LABEL="DellUtility" UUID="07DA-0512" TYPE="vfat" /dev/sda2: LABEL="RECOVERY" UUID="8834146034145392" TYPE="ntfs" /dev/sda3: LABEL="OS" UUID="48E2189DE21890F4" TYPE="ntfs" /dev/sda5: LABEL="Varshneya" UUID="BC2A44C02A447982" TYPE="ntfs" /dev/loop0: TYPE="squashfs" /dev/sda6: UUID="34731459-4b0f-46ac-a9bf-cb360a2c947c" TYPE="ext4" /dev/sda7: UUID="dcb9ce9b-799a-4c65-b008-887b01775670" TYPE="swap" /dev/sr0: LABEL="Ubuntu 12.04.1 LTS i386" TYPE="iso9660" 1 disks with OS, 2 OS : 1 Linux, 0 MacOS, 1 Windows, 0 unknown type OS. Windows not detected by os-prober on sda3. Warning: extended partition does not start at a cylinder boundary. DOS and Linux will interpret the contents differently. =================== /mnt/etc/default/grub : # If you change this file, run 'update-grub' afterwards to update # /boot/grub/grub.cfg. # For full documentation of the options in this file, see: # info -f grub -n 'Simple configuration' GRUB_DEFAULT=0 GRUB_HIDDEN_TIMEOUT=0 GRUB_HIDDEN_TIMEOUT_QUIET=true GRUB_TIMEOUT=10 GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian` GRUB_CMDLINE_LINUX_DEFAULT="quiet splash" GRUB_CMDLINE_LINUX="" # Uncomment to enable BadRAM filtering, modify to suit your needs # This works with Linux (no patch required) and with any kernel that obtains # the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...) #GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef" # Uncomment to disable graphical terminal (grub-pc only) #GRUB_TERMINAL=console # The resolution used on graphical terminal # note that you can use only modes which your graphic card supports via VBE # you can see them in real GRUB with the command `vbeinfo' #GRUB_GFXMODE=640x480 # Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux #GRUB_DISABLE_LINUX_UUID=true # Uncomment to disable generation of recovery mode menu entries #GRUB_DISABLE_RECOVERY="true" # Uncomment to get a beep at grub start #GRUB_INIT_TUNE="480 440 1" =================== /mnt/etc/grub.d/ : drwxr-xr-x 2 root root 4096 Nov 22 16:15 grub.d total 56 -rwxr-xr-x 1 root root 6743 Sep 12 20:19 00_header -rwxr-xr-x 1 root root 5522 Sep 12 20:05 05_debian_theme -rwxr-xr-x 1 root root 7407 Sep 12 20:19 10_linux -rwxr-xr-x 1 root root 6335 Sep 12 20:19 20_linux_xen -rwxr-xr-x 1 root root 1588 Sep 24 2010 20_memtest86+ -rwxr-xr-x 1 root root 7603 Sep 12 20:19 30_os-prober -rwxr-xr-x 1 root root 214 Sep 12 20:19 40_custom -rwxr-xr-x 1 root root 95 Sep 12 20:19 41_custom -rw-r--r-- 1 root root 483 Sep 12 20:19 README =================== No kernel in /mnt/boot: grub memtest86+.bin memtest86+_multiboot.bin =================== UEFI/Legacy mode: This live-session is not EFI-compatible. SecureBoot maybe enabled. =================== PARTITIONS & DISKS: sda1 : sda, not-sepboot, no-grubenv nogrub, no-docgrub, no-update-grub, 32, no-boot, no-os, not--efi--part, part-has-no-fstab, part-has-no-fstab, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, nopakmgr, nogrubinstall, no---usr, part-has-no-fstab, not-sep-usr, standard, not-far, /mnt/boot-sav/sda1. sda2 : sda, not-sepboot, no-grubenv nogrub, no-docgrub, no-update-grub, 32, no-boot, is-os, not--efi--part, part-has-no-fstab, part-has-no-fstab, no-nt, no-winload, no-recov-nor-hid, bootmgr, is-winboot, nopakmgr, nogrubinstall, no---usr, part-has-no-fstab, not-sep-usr, standard, not-far, /mnt/boot-sav/sda2. sda3 : sda, not-sepboot, no-grubenv nogrub, no-docgrub, no-update-grub, 32, no-boot, is-os, not--efi--part, part-has-no-fstab, part-has-no-fstab, no-nt, haswinload, no-recov-nor-hid, no-bmgr, notwinboot, nopakmgr, nogrubinstall, no---usr, part-has-no-fstab, not-sep-usr, standard, farbios, /mnt/boot-sav/sda3. sda5 : sda, not-sepboot, no-grubenv nogrub, no-docgrub, no-update-grub, 32, no-boot, no-os, not--efi--part, part-has-no-fstab, part-has-no-fstab, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, nopakmgr, nogrubinstall, no---usr, part-has-no-fstab, not-sep-usr, standard, farbios, /mnt/boot-sav/sda5. sda6 : sda, not-sepboot, grubenv-ok grub2, grub-pc, update-grub, 64, no-kernel, is-os, not--efi--part, fstab-without-boot, fstab-without-efi, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, apt-get, grub-install, with--usr, fstab-without-usr, not-sep-usr, standard, farbios, /mnt. sda : not-GPT, BIOSboot-not-needed, has-no-EFIpart, not-usb, has-os, 63 sectors * 512 bytes =================== parted -l: Model: ATA ST9320423AS (scsi) Disk /dev/sda: 320GB Sector size (logical/physical): 512B/512B Partition Table: msdos Number Start End Size Type File system Flags 1 32.3kB 140MB 140MB primary fat16 diag 2 141MB 9936MB 9796MB primary ntfs boot 3 9936MB 112GB 102GB primary ntfs 4 112GB 320GB 208GB extended lba 6 112GB 166GB 54.1GB logical ext4 7 166GB 168GB 2352MB logical linux-swap(v1) 5 168GB 320GB 152GB logical ntfs Model: HL-DT-ST DVD+-RW GA31N (scsi) Disk /dev/sr0: 4700MB Sector size (logical/physical): 2048B/2048B Partition Table: msdos Number Start End Size Type File system Flags 1 131kB 2916MB 2916MB primary boot, hidden =================== parted -lm: BYT; /dev/sda:320GB:scsi:512:512:msdos:ATA ST9320423AS; 1:32.3kB:140MB:140MB:fat16::diag; 2:141MB:9936MB:9796MB:ntfs::boot; 3:9936MB:112GB:102GB:ntfs::; 4:112GB:320GB:208GB:::lba; 6:112GB:166GB:54.1GB:ext4::; 7:166GB:168GB:2352MB:linux-swap(v1)::; 5:168GB:320GB:152GB:ntfs::; BYT; /dev/sr0:4700MB:scsi:2048:2048:msdos:HL-DT-ST DVD+-RW GA31N; 1:131kB:2916MB:2916MB:::boot, hidden; =================== mount: /cow on / type overlayfs (rw) proc on /proc type proc (rw,noexec,nosuid,nodev) sysfs on /sys type sysfs (rw,noexec,nosuid,nodev) udev on /dev type devtmpfs (rw,mode=0755) devpts on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=0620) tmpfs on /run type tmpfs (rw,noexec,nosuid,size=10%,mode=0755) /dev/sr0 on /cdrom type iso9660 (ro,noatime) /dev/loop0 on /rofs type squashfs (ro,noatime) none on /sys/fs/fuse/connections type fusectl (rw) none on /sys/kernel/debug type debugfs (rw) none on /sys/kernel/security type securityfs (rw) tmpfs on /tmp type tmpfs (rw,nosuid,nodev) none on /run/lock type tmpfs (rw,noexec,nosuid,nodev,size=5242880) none on /run/shm type tmpfs (rw,nosuid,nodev) gvfs-fuse-daemon on /home/ubuntu/.gvfs type fuse.gvfs-fuse-daemon (rw,nosuid,nodev,user=ubuntu) /dev/sda6 on /mnt type ext4 (rw) /dev on /mnt/dev type none (rw,bind) /proc on /mnt/proc type none (rw,bind) /sys on /mnt/sys type none (rw,bind) /usr on /mnt/usr type none (rw,bind) /dev/sda1 on /mnt/boot-sav/sda1 type vfat (rw) /dev/sda2 on /mnt/boot-sav/sda2 type fuseblk (rw,nosuid,nodev,allow_other,blksize=4096) /dev/sda3 on /mnt/boot-sav/sda3 type fuseblk (rw,nosuid,nodev,allow_other,blksize=4096) /dev/sda5 on /mnt/boot-sav/sda5 type fuseblk (rw,nosuid,nodev,allow_other,blksize=4096) =================== ls: /sys/block/sda (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro sda1 sda2 sda3 sda4 sda5 sda6 sda7 size slaves stat subsystem trace uevent /sys/block/sr0 (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro size slaves stat subsystem trace uevent /dev (filtered): autofs block bsg btrfs-control bus cdrom cdrw char console core cpu cpu_dma_latency disk dri dvd dvdrw ecryptfs fb0 fd full fuse fw0 hidraw0 hpet input kmsg log mapper mcelog mei mem net network_latency network_throughput null oldmem port ppp psaux ptmx pts random rfkill rtc rtc0 sda sda1 sda2 sda3 sda4 sda5 sda6 sda7 sg0 sg1 shm snapshot snd sr0 stderr stdin stdout uinput urandom usbmon0 usbmon1 usbmon2 v4l vga_arbiter video0 zero ls /dev/mapper: control =================== df -Th: Filesystem Type Size Used Avail Use% Mounted on /cow overlayfs 1.9G 113M 1.8G 6% / udev devtmpfs 1.9G 12K 1.9G 1% /dev tmpfs tmpfs 777M 872K 776M 1% /run /dev/sr0 iso9660 696M 696M 0 100% /cdrom /dev/loop0 squashfs 667M 667M 0 100% /rofs tmpfs tmpfs 1.9G 20K 1.9G 1% /tmp none tmpfs 5.0M 0 5.0M 0% /run/lock none tmpfs 1.9G 176K 1.9G 1% /run/shm /dev/sda6 ext4 51G 27G 22G 56% /mnt /dev/sda1 vfat 134M 9.1M 125M 7% /mnt/boot-sav/sda1 /dev/sda2 fuseblk 9.2G 5.6G 3.6G 61% /mnt/boot-sav/sda2 /dev/sda3 fuseblk 95G 80G 16G 84% /mnt/boot-sav/sda3 /dev/sda5 fuseblk 142G 130G 12G 92% /mnt/boot-sav/sda5 =================== fdisk -l: Disk /dev/sda: 320.1 GB, 320072933376 bytes 255 heads, 63 sectors/track, 38913 cylinders, total 625142448 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0xb8000000 Device Boot Start End Blocks Id System /dev/sda1 63 273104 136521 de Dell Utility /dev/sda2 * 274432 19406847 9566208 7 HPFS/NTFS/exFAT /dev/sda3 19406848 218274364 99433758+ 7 HPFS/NTFS/exFAT /dev/sda4 218275838 625139711 203431937 f W95 Ext'd (LBA) /dev/sda5 328630272 625139711 148254720 7 HPFS/NTFS/exFAT /dev/sda6 218275840 324030463 52877312 83 Linux /dev/sda7 324032512 328626175 2296832 82 Linux swap / Solaris Partition table entries are not in disk order =================== Repair blockers 64bits detected. Please use this software in a 64bits session. (Please use Ubuntu-Secure-Remix-64bits (www.sourceforge.net/p/ubuntu-secured) which contains a 64bits-compatible version of this software.) This will enable this feature. =================== Final advice in case of recommended repair The boot files of [Ubuntu 12.04.1 LTS] are far from the start of the disk. Your BIOS may not detect them. You may want to retry after creating a /boot partition (EXT4, >200MB, start of the disk). This can be performed via tools such as gParted. Then select this partition via the [Separate /boot partition:] option of [Boot Repair]. (https://help.ubuntu.com/community/BootPartition) =================== Default settings Recommended-Repair This setting would reinstall the grub2 of sda6 into the MBR of sda, using the following options: kernel-purge Additional repair would be performed: unhide-bootmenu-10s fix-windows-boot =================== Settings chosen by the user Boot-Info This setting will not act on the MBR. No change has been performed on your computer. See you soon! pastebinit packages needed dpkg-preconfigure: unable to re-open stdin: No such file or directory pastebin.com ko (), using paste.ubuntu Please report this message to [email protected] Any help would be great, I'm really missing Ubuntu (hate being stuck in the Windows world).

  Read the article

• How to enable hard-blocked bluetooth in Thinkpad Edge 320

  - by Non

  I'm trying to use the built-in bluetooth device of my Lenovo Thinkpad E320. It seems to be hard blocked, but i can't find any possibility to unblock it. rfkill list returns: 0: tpacpi_bluetooth_sw: Bluetooth Soft blocked: yes Hard blocked:yes cat /proc/acpi/ibm/bluetooth returns: status: disabled commands: enable, disable I tried to enable it by: Pressing Fn+F9 (Radio controll) echo enable | tee /proc/acpi/ibm/bluetooth rfkill unblock bluetooth Trough the BIOS. But it's not mentioned at all None of the actions influenced the ouputs above.

  Read the article

• Access variables values from Trigger

  Pass variables values from Stored Procedures to Trigger

  Read the article

• BizTalk 2009 - The Community ODBC Adapter: Schema Generation

  - by Stuart Brierley

  Having previously detailed the installation of the Community ODBC Adapter for BizTalk 2009, the next thing I will be looking at is the generation of schemas using this ODBC adapter. Within your BizTalk 2009 project, right click the project and select Add Generated Items.  In the resultant window choose Add Adapter Metadata and click Add to open the Add Adapter Wizard. Check that the BizTalk Server and Database names are correct, select the ODBC adapter and click next. You must now set the connection string. To start with choose set, then new DSN (data source name). You now need to define the Data Source you will be connecting to.  On the User DSN tab select Add add then driver you want to use. In this case I am going to use the MySQL ODBC Driver.  A User DSN will only be visible on the current machine with you as a user. * Although I initially set up a User DSN and this was fine for creating schemas with, I later realised that you actually need a system DSN as the BizTalk host service needs this to be able connect to the database on a receive or send port. You will then be asked to Set up the MySQL ODBC Data Source.  In my case this is a local database making use of named pipes, so I had to make sure that I ticked the "Force use of named pipes" check box and removed the "# The Pipe the MySQL Server will use socket=mysql" line from the mysql.ini; with this is place the connection would fail as there is no apparent way to specify the pipe name in the ODBC driver configuration. This will then update the User DSN tab with the new Data Source.  Make sure that you select it and press OK. Select it again in the Choose Data Source window and press OK.  On the ODBC transport window select next. You will now be presented with the Schema Information window, where you must supply the namespace, type and root element names for your schema. Next choose the type of statement that you will be using to create your schema - in this case I am using a stored procedure. *I later discovered that this option is fine for MySQL stored procedures without input parameters, but failed for MySQL stored procedures with input parameters.  (I will be posting on the way to handle input parameters soon) Next you will need to specify the name of the stored procedure.  In this case I have a simple stored procedure to return all the data held by my TestTable in MySQL. Select * from TestTable; The table itself has three columns: Name, Sex and Married. Selecting finish should now hopefully create your schemas based on the input and output from your stored procedure. In my case I have:   An empty schema for the request; after all I have no parameters for the stored procedure.  A response schema comprised of a Table Record with Name, Sex and Married children. Next I will be looking at the use of the ODBC adpater with: Receive ports Send ports

  Read the article

• JPGDateChanger - Tool to Restore Last Modified Date for JPG Files

  JPGDateChanger is a tool that changes last modified date to the one stored in EXIF data

  Read the article

• Setting up quotas on 64-bit RHEL6 OS with ext4 filesystem

  - by Rob Mangiafico

  Setting up a new 64 bit RHEL 6 server with ext4 FS. Have only worked with ext3 and 32bit RHEL5 before. No matter what I try, I cannot get it to work. Current settings for mount (from "mount" command): /dev/sda7 on / type ext4 (rw,noatime) proc on /proc type proc (rw) sysfs on /sys type sysfs (rw) devpts on /dev/pts type devpts (rw,gid=5,mode=620) tmpfs on /dev/shm type tmpfs (rw,noexec,nosuid) /dev/sdb1 on /backup type ext4 (rw) /dev/sda1 on /boot type ext4 (rw,noatime) /dev/sda8 on /home type ext4 (rw,noatime,usrjquota=aquota.user,grpjquota=aquota.group,jqfmt=vfsv0) /dev/sda2 on /tmp type ext4 (rw,noexec,noatime) /dev/sda6 on /usr type ext4 (rw,noatime) /dev/sda5 on /var type ext4 (rw,noatime,usrjquota=aquota.user,jqfmt=vfsv0) none on /proc/sys/fs/binfmt_misc type binfmt_misc (rw) Essentially trying to get user/group quotas on /home, and user quotas on /var. Created the aquota.user and aquota.group files on /home and /var: -rw-r--r-- 1 root root 0 Nov 17 13:37 /home/aquota.group -rw-r--r-- 1 root root 0 Nov 17 13:37 /home/aquota.user -rw------- 1 root root 0 Nov 17 11:43 /var/aquota.user When I run quoatcheck I get: quotacheck -vguma quotacheck: WARNING - Quotafile /home/aquota.user was probably truncated. Cannot save quota settings... quotacheck: WARNING - Quotafile /home/aquota.group was probably truncated. Cannot save quota settings... quotacheck: WARNING - Quotafile /var/aquota.user was probably truncated. Cannot save quota settings... Then I attempt quotaon and get: quotaon -av quotaon: Cannot find quota file on /home [/dev/sda8] to turn quotas on/off. quotaon: Cannot find quota file on /home [/dev/sda8] to turn quotas on/off. quotaon: Cannot find quota file on /var [/dev/sda5] to turn quotas on/off. quota rpms installed: rpm -qa|grep -i quota quota-3.17-16.el6.x86_64 quota-devel-3.17-16.el6.x86_64 Any ideas what I'm doing wrong or what I should adjust to get quotas to work as they do in ext3/32bit?

  Read the article

• Hudson Mercurial checkout throws exception on Debian

  - by Jack

  I'm trying to configure Hudson to checkout my site's sources from Mercurial but it throws an exception. The /var/lib/hudson/jobs/jobname directory does exist, and I can create a workspace directory in there (even after su hudson), but as soon as I run the Hudson job again this directory disappears and the job ends with the same error: java.io.IOException: Cannot run program "hg" (in directory "/var/lib/hudson/jobs/jobname/workspace"): java.io.IOException: error=2, No such file or directory at java.lang.ProcessBuilder.start(ProcessBuilder.java:460) at hudson.Proc$LocalProc.<init>(Proc.java:192) at hudson.Proc$LocalProc.<init>(Proc.java:164) at hudson.Launcher$LocalLauncher.launch(Launcher.java:639) at hudson.Launcher$ProcStarter.start(Launcher.java:274) at hudson.Launcher$ProcStarter.join(Launcher.java:281) at hudson.plugins.mercurial.MercurialSCM.joinWithPossibleTimeout(MercurialSCM.java:298) at hudson.plugins.mercurial.HgExe.popen(HgExe.java:191) at hudson.plugins.mercurial.HgExe.tip(HgExe.java:171) at hudson.plugins.mercurial.MercurialSCM.calcRevisionsFromBuild(MercurialSCM.java:254) at hudson.scm.SCM._calcRevisionsFromBuild(SCM.java:304) at hudson.model.AbstractProject.calcPollingBaseline(AbstractProject.java:1183) at hudson.model.AbstractProject.checkout(AbstractProject.java:1172) at hudson.model.AbstractBuild$AbstractRunner.checkout(AbstractBuild.java:499) at hudson.model.AbstractBuild$AbstractRunner.run(AbstractBuild.java:415) at hudson.model.Run.run(Run.java:1362) at hudson.model.FreeStyleBuild.run(FreeStyleBuild.java:46) at hudson.model.ResourceController.execute(ResourceController.java:88) at hudson.model.Executor.run(Executor.java:145) Caused by: java.io.IOException: java.io.IOException: error=2, No such file or directory at java.lang.UNIXProcess.<init>(UNIXProcess.java:148) at java.lang.ProcessImpl.start(ProcessImpl.java:65) at java.lang.ProcessBuilder.start(ProcessBuilder.java:453) Running on Debian 6.0.1 I wonder if anyone has ran into this before, and hopefully solved it?

  Read the article

• Virtualbox HTTP load testing, host CPU overload issues

  - by aschuler

  I'm doing HTTP load testing benchmarks (using Apache Benchmark and Siege) on a small Java EE 1.7.0 / Tomcat 7.0.26 application running on a Debian Squeeze 6.0.4 x64 virtualized with Virtualbox 4.1.8. The computer host is Ubuntu 11.10 x64. I've modified those parameters in the Tomcat server.xml : <Connector port="8080" protocol="HTTP/1.1" connectionTimeout="200000" redirectPort="8443" acceptCount="2000" maxThreads="150" minSpareThreads="50" /> The application executed on the server takes around 300ms. This app is running well until a certain amount of concurrent connections like those one : ab -n 500 -c 150 http://xx.xx.xx.xx:8080/myapp/ ab -n 1000 -c 50 http://xx.xx.xx.xx:8080/myapp/ siege -b -c 100 -r 20 http://xx.xx.xx.xx:8080/myapp/ A lot of socket connection timed out happens and this completly overload the host processor (but the CPU load inside the VM is normal). Doing an htop on the host, i can see that the Virtualbox processus is running under 300% CPU and never come down even after the load test is finished. (I've allocated 4 processors to the VM, if I allocate only one processor, CPU load goes under 100%). Restarting Tomcat don't do anything, i'm forced to restart the whole VM. I've tryed to launch those ab/siege commands locally on the VM and everything goes well. I first thought it was related to a linux network limit as explained here: Running some benchmarks using ab, and tomcat starts to really slow down So I've modified those TCP parameters : echo 15 > /proc/sys/net/ipv4/tcp_fin_timeout echo 30 > /proc/sys/net/ipv4/tcp_keepalive_intvl echo 1 > /proc/sys/net/ipv4/tcp_tw_recycle echo 1 > /proc/sys/net/ipv4/tcp_tw_reuse It seems to be better, but it continues to overload the host CPU and output socket connections time out at a certain amount of concurrent connections. I'm wondering if this is not related to how Virtualbox handles external concurrent connections.

  Read the article

• Bash wonkyness on Ubuntu versus RHEL

  - by d34dh0r53

  Fellow faulters, I'm playing around with a one liner that I've developed on a RHEL 5.4 box and I have it working perfectly: TOTAL_RAM=`free | grep Mem: | awk '{ print $2 }'`; \ ps axo rss,comm,pid | awk -v total_ram=$TOTAL_RAM \ '{ proc_list[$2] += $1; } END { for (proc in proc_list) \ { proc_pct = (proc_list[proc]/total_ram)*100; printf("%d\t%s\t%0.2f%\n", proc_list[proc],proc,proc_pct); }}' \ | sort -n | tail -n 10 Which outputs something like the following on my RHEL box: 3736 logmon 0.01% 4156 EvMgrC 0.01% 4692 hald 0.01% 5020 ntpd 0.02% 6252 sshd 0.02% 7784 cvd 0.02% 9224 snmpd 0.03% 13068 dsm_sa_datamgr3 0.04% 23320 dsm_om_connsvc3 0.07% 4249864 mysqld 12.90% However on my Ubuntu 9.04 slice I get this: awk: run time error: not enough arguments passed to printf("%d %s %0.2f% ") FILENAME="-" FNR=104 NR=104 33248 console-kit-dae 3.17 I think it has to be bash that is borking something, but I'm really not doing anything that should be that bash specific. The RHEL box is running: # yum info bash | grep -e Version -e Release Version : 3.2 Release : 24.el5 And the Ubuntu box: # apt-cache show bash | grep -e Version Version: 3.2-5ubuntu1 I haven't dug into this super deeply, and thought I'd ping my fellow johnnys to see if you've ever run across this before. /bow

  Read the article

• How to get an ARM CPU clock speed in Linux?

  - by MiKy

  I have an ARM-based embedded machine based on S3C2416 board. According to the specifications I have available there should be a 533 MHz ARM9 (ARM926EJ-S according to /proc/cpuinfo), however the software running on it "feels" slow, compared to the same software on my Android phone with a 528MHz ARM CPU. /proc/cpuinfo tells me that BogoMIPS is 266.24. I know that I should not trust BogoMIPS regarding performance ("Bogo" = bogus), however I would like to get a measurement on the actual CPU speed. On x86, I could use the rdtsc instruction to get the time stamp counter, wait a second (sleep(1)), read the counter again to get an approximation on the CPU speed, and according to my experience, this value was close enough to the real CPU speed. How can I find the actual CPU speed of given ARM processor? Update I found this simple Pi calculator, which I compiled both for my Android phone and the ARM board. The results are as follows: S3C2416 # cat /proc/cpuinfo Processor : ARM926EJ-S rev 5 (v5l) BogoMIPS : 266.24 Features : swp half fastmult edsp java ... #./pi_arm 10000 Calculation of PI using FFT and AGM, ver. LG1.1.2-MP1.5.2a.memsave ... 8.50 sec. (real time) Android # cat /proc/cpuinfo Processor : ARMv6-compatible processor rev 2 (v6l) BogoMIPS : 527.56 Features : swp half thumb fastmult edsp java # ./pi_android 10000 Calculation of PI using FFT and AGM, ver. LG1.1.2-MP1.5.2a.memsave ... 5.95 sec. (real time) So it seems that the ARM926EJ-S is slower than my Android phone, but not twice slower as I would expect by the BogoMIPS figures. I am still unsure about the clock speed of the ARM9 CPU.

  Read the article

• Online resizing of kvm guest root filesystem?

  - by Bittrance

  I have a Linux guest that uses an LVM volume directly as root file system (that is, there is no partition table). libvirt config looks thus: <os> <type arch='x86_64' machine='rhel6.4.0'>hvm</type> <kernel>/boot/vmlinuz-X.Y.Z.el6.x86_64</kernel> <initrd>/boot/initramfs-X.Y.Z.el6.x86_64.img</initrd> <cmdline>console=ttyS0 root=/dev/vda</cmdline> <boot dev='hd'/> </os> <disk type='block' device='disk'> <driver name='qemu' type='raw' cache='none' io='native'/> <source dev='/dev/vg/guest'/> <target dev='vda' bus='virtio'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x04' function='0x0'/> </disk> From inside the guest: $ mount /dev/vda on / type ext4 (rw) proc on /proc type proc (rw) sysfs on /sys type sysfs (rw) devpts on /dev/pts type devpts (rw,gid=5,mode=620) tmpfs on /dev/shm type tmpfs (rw) none on /proc/sys/fs/binfmt_misc type binfmt_misc (rw) Is it possible to resize the guest's root partition without rebooting the guest? Just doing lvextend on the host and resize2fs from the guest does not seem to be enough.

  Read the article

• Puppet inventory service using puppetdb

  - by Oli

  I have 3 servers set up. A puppet master using passenger (puppet-server1), dashboard using passenger (puppet-server2) and puppetdb (puppet-server3). I cannot get the inventory service working in the dashboard. The puppet master is able to sign certs and hand out manifests. The nodes have checked in to the dashboard ok The puppetdb appears to be working - logs files as follows: 2012-12-13 17:53:10,899 INFO [command-proc-74] [puppetdb.command] [8490148f-865a-45c8-b5b5-2c8824d753dd] [replace facts] puppet-server3.test.net 2012-12-13 17:53:11,041 INFO [command-proc-74] [puppetdb.command] [dfcc5168-06df-41d4-9a97-77b4cd3f4a2b] [replace catalog] puppet-server3.test.net 2012-12-13 17:55:28,600 INFO [command-proc-74] [puppetdb.command] [b2cc0a96-0404-49f5-96ad-19c778508d3d] [replace facts] puppet-client2.test.net 2012-12-13 17:55:28,729 INFO [command-proc-74] [puppetdb.command] [4dc4b8f3-06df-4dad-a89a-92ac80447b99] [replace catalog] puppet-client2.test.net The puppet master has the following configured in puppet.conf [master] certname = puppet-server1.test.net storeconfigs = true storeconfigs_backend = puppetdb reports = store, http reporturl = http://puppet-server2.test.net/reports/upload The puppet master have the following configured in auth.conf #access for puppet dashboard facts path /facts auth yes method find, search allow dashboard The puppet dashboard has this configured in /usr/share/puppet-dashboard/config/settings.yml # Hostname of the inventory server. inventory_server: 'puppet-server3.test.net' # Port for the inventory server. inventory_port: 8081 The inventory is on as I see a link to the inventory in the dashboard server But I am getting this error: Inventory Could not retrieve facts from inventory service: SSL_connect SYSCALL returned=5 errno=0 state=SSLv3 read finished A clearly an SSL error - but I have followed the documentation and have no idea how to fix this. Can anyone help please? Oli

  Read the article

• Jenkins shell command isn't executing

  - by Dmitro

  In Jenkins project I add command for executiong rm /var/www/ru.liveyurist.ru/tmp/* But when I build project I get error: Started by user anonymous Building in workspace /var/www/ru.myproject.ru Updating https://subversion.assembla.com/svn/myproject/trunk At revision 1168 no change for https://subversion.assembla.com/svn/liveexpert/trunk since the previous build [ru.myproject.ru] $ /bin/sh -xe /tmp/hudson7189633355149866134.sh FATAL: command execution failed java.io.IOException: Cannot run program "/bin/sh" (in directory "/var/www/ru.myproject.ru"): java.io.IOException: error=12, Cannot allocate memory at java.lang.ProcessBuilder.start(ProcessBuilder.java:475) at hudson.Proc$LocalProc.<init>(Proc.java:244) at hudson.Proc$LocalProc.<init>(Proc.java:216) at hudson.Launcher$LocalLauncher.launch(Launcher.java:709) at hudson.Launcher$ProcStarter.start(Launcher.java:338) at hudson.Launcher$ProcStarter.join(Launcher.java:345) at hudson.tasks.CommandInterpreter.perform(CommandInterpreter.java:82) at hudson.tasks.CommandInterpreter.perform(CommandInterpreter.java:58) at hudson.tasks.BuildStepMonitor$1.perform(BuildStepMonitor.java:19) at hudson.model.AbstractBuild$AbstractRunner.perform(AbstractBuild.java:703) at hudson.model.Build$RunnerImpl.build(Build.java:178) at hudson.model.Build$RunnerImpl.doRun(Build.java:139) at hudson.model.AbstractBuild$AbstractRunner.run(AbstractBuild.java:473) at hudson.model.Run.run(Run.java:1410) at hudson.model.FreeStyleBuild.run(FreeStyleBuild.java:46) at hudson.model.ResourceController.execute(ResourceController.java:88) at hudson.model.Executor.run(Executor.java:238) Caused by: java.io.IOException: java.io.IOException: error=12, Cannot allocate memory at java.lang.UNIXProcess.<init>(UNIXProcess.java:164) at java.lang.ProcessImpl.start(ProcessImpl.java:81) at java.lang.ProcessBuilder.start(ProcessBuilder.java:468) ... 16 more Build step 'Execute shell' marked build as failure Finished: FAILURE I started Jenkins from root user. Please advise what can be reason of this error?

  Read the article

< Previous Page | 60 61 62 63 64 65 66 67 68 69 70 71  | Next Page >