Search Results

Search found 1900 results on 76 pages for 'xserve raid'.

Page 64/76 | < Previous Page | 60 61 62 63 64 65 66 67 68 69 70 71  | Next Page >

• Dell PowerEdge 2950 III running XenServer with 2 VMs gets sluggish after a week and needs rebooted?

  - by Joshua Rountree

  It has weird hangs and then random CPU spikes that do a ton at once. While remoted into the VMs I get an update all at once then it hangs for another 20 seconds. When it lets it go through I get a CPU spike. Basic server specs for the HW node is: 8 CPUs, 16GB ram 1TB HDD total iPERC6 raid 10 The VMs are barely used but I have them spec'd at VM 1: 4 CPUs, 4GB Ram VM2: 4 CPUs 6GB ram The HW node currently says it's total CPU usage is 11% AND Used Memory is at 63%out of 16GB I'm new to this stuff so I'm not sure. I just recently installed this and set it all up. Please advise if you can!

  Read the article

• Server responses "bus error" to every command

  - by Temnovit

  I have a linux machine dedicated to MySQL server with a pretty high load. Today I woke up and was terrified to see, that database server is down. I could connect to it via SSH, but it was responding with bus error to each and every command. [root@r1304 home]# ls Bus error [root@r1304 home]# tail /var/log/messages Bus error [root@r1304 home]# reboot Bus error [root@r1304 home]# free -m Bus error [root@r1304 home]# chkdisk Bus error I went to Data Center and did a hard reset, which seemed to help, but after a half an hour situation reapeated and now I can't even connet via SSH anymore. Any ideas what this could be? how to diagnose such a problem and what are possible fixes? Server has 32 GB RAM, 2xSSD drives with software RAID UPDATE According to Zabbix, when MySQL died, number of processes stated to increase drammaticaly, until I did a hard reset. What could those be? Number of processes

  Read the article

• Little server for a little network: Asus TS Mini + Windows Home Server or other?

  - by microspino

  Hello, I'm building a little network with 4 computer a plotter, 3 printers an a HP Fax/Scan/Copy/Print machine. The network is connected to the web by a D-Link router/firewall. I would like to add little server to have file sharing (reachable via VPN from outside by a single user-road-warrior), automatic backups. I would like to avoid big electrics bills or, to say It in a green way, I would like to avoid useless power consumption made by a big server with hot-plug, Raid, double PSU because I don't need all this stuff. The server must work 24/7 and the budget is between 400€ and 1000€. I'm evaluating the Asus EEE Box (with XP), a TranquilPC (with XP), a FitPC (again with XP), and an Asus TS Mini (with Windows Home Server). I like the latter but since I'm Europe I don't know where I can buy It. Do you have any suggestion/experience to share with me about: which hardware do I have to buy ? which O.S. ?

  Read the article

• Esxi with iSCSI SAN slows down with many multiple VMs running

  - by varesa

  I have a server with ESXi 5 and iSCSI attached network storage(4x1Tb Raid-Z on freenas). Those two machines are connected to each other with Gigabit ethernet, and a procurve switch in between. After a while, if I have many(4-5 or more) vms running, they start to get un-responsive (long delays before anything happens). We are trying to find the reason behind this. Today we looked at esxtop, and found that DAVG of that iSCSI LUN stays at 70-80. I read that +30 is critical! What could be causing those high response-times?

  Read the article

• How to force Windows to call the partition it installs on C:?

  - by maaartinus

  I'm going to install Windows XP from a CD and want to make sure it calls the partition it lands on C:. The target partition is the first one on a SATA disk, which is not the first one in my computer. There's no IDE disk there. I don't think I can swap the disks, as I'm using a fake RAID and really don't want to get problems with it. The target partition is on a normal disk. I know it may be unimportant, but I don't want to run in any problems I can avoid. I've seen a question slightly related to it, but I'm not going to install from a USB.

  Read the article

• VMWare workstation: guest OS becomes sluggish after being idle for 12+ hours?

  - by GenEric35

  Hi, My VM becomes sluggish after a few hours(~12 hours or so) of being idle, there is no impact on the host, just the gueste. The guest OS becomes sluggish. It has lots of RAM, runs on Raid 0, quad core i5 750, everything is defragged, but the only way I found to keep it's responsiveness optimal is to shutdown(dumps the memory) and the start; a restart of the guest OS doesnt dump the memory so I need to be able to do a stop of the VM, and then a start. Coming from Hyper-V I had to learn VMWare and after a few months of fine tunning it I'm quite impressed with how configurable VMWare is. This is the only small issue I haven't been able to fix, has anyone encountered this?

  Read the article

• PC reboots regularly

  - by Bob

  Windows XP RAID 5 drives Intel Dual Core processor 2 GB Ram I am running a processor temperature monitor. It does not appear to be overheating. I do not have virus. The PC freezes and reboots. I do not think it is software related, because it will reboot if it is doing nothing. Could it be the power supply? Might i need to replace it? How do I diagnose this? Is this the kind of question that is appropriate here? I am not sure.

  Read the article

• Can I use dis-similar HW for Win2008r2 DFS-R

  - by cwheeler33

  The setup: Windows 2008R2 Ent on two machines. The roles on each server will include File Servers and DC's. The machines come from two different vendors (Dell/HP) The Dell is an Athlon and the HP is an Intel. Both have roughly the same speed CPU and 8GB of RAM. They have different Raid controllers, and more or less the same amount of disk space (roughly 6TB.) Can the servers use different types of hardware? Is there any documentation about this? The last question I have is about the network. Can DFS-R be forced to use a differen subnet from the regular network?

  Read the article

• How does a winkydink Teradici offer high res, full FPS, 3D rendering on ESXi 5 VDIs for AutoCAD/SolidWorks/1080p YouTube applications?

  - by BlueToast

  How does such a small Teradici card ![enter image description here][1] offer high resolution, full FPS 3D graphics (1:38) http://www.youtube.com/watch?v=eXA4QMmfY5Y&feature=player_detailpage#t=97s for ESXi 5.0/5.1 VDI environments? We're shooting for an AutoCAD/SolidWorks/YouTube 1080p capable environment. I can't see how such a small and low profile card could possibly have the horsepower to handle such GPU computations for a big environment like that. We're going to have up to 64 VDIs per server, and are a 500-1000 employee count sized company. Someone enlighten me please! Determining which route to go (between RemoteFX and VMware View/PCoIP) and the hardware (NVIDIA 4GB non-Quadro/Tesla GPUs vs Teradici card). Servers have three 4x, three 8x, and one 16x PCI-E lane. Two of the 8x lanes will be occupied by SAS RAID cards.

  Read the article

• How could all of my hard drives fail at once?

  - by Taylor

  I have an Ubuntu 13.04 server. Today I found the box had crashed. I restarted it, and now every single hard drive's partition table is missing. (1 SSD for /boot, /, and 3 2TB drives for RAID). I have the SSD connected to a laptop VIA USB-SATA cable, and sure enough, the partition table is missing. This tells me that the Motherboard / SATA controller / software actually broke the drives, not that they just can't be read correctly. Something similar happened to only the SSD a few months ago, and I was forced to just re-partition it. How the heck could his have happened? Bad Motherboard or SATA controller?

  Read the article

• Iozone: sensible settings for a server with lots of RAM

  - by Frank Brenner

  I have just acquired a server with: 2x quadcore Xeons 48G ECC RAM 5x 160GB SSDs on an LSI 9260-8i Before deploying the target platform, I'd like to collect as much benchmark data as possible, testing I/O with hardware RAID in various configurations, ZFS zRAID, as well as I/O performance on vSphere and with KVM virtualization. In order to see real disk I/O performance without cache effects, I tried running Iozone with a maximum file of more than twice the physical RAM as recommended in the documentation, so: iozone -a -g100G However, as one might expect, this takes far too long to be practicable. (I stopped the run after seven hours..) I'd like to reduce the range of record and file sizes to values that might reflect realistic performance for an application server, hopefully getting the run times to under an hour or so. Any ideas? Thanks.

  Read the article

• SSD on Vmware ESXI 4 (TRIM? Good Idea?)

  - by nextgenneo

  Hi, I just posted about finding bottle necks and have narrowed it down to having way too many VMs on my machine on one 15K SAS drive. I have plenty of cores and plenty of ram. So I am planning on putting 6 VMs on one drive (so 5 drives for 30 VMs). I am thinking of using a 60GB Vertex 2 SSD. Each of my VMs will only need about 6GB of HDD space so this isn't a big deal. My questions are: does ESXI support Trim and do I really need it if I leave 25% of the drive as free space? If I need it should I get a diff drive that handles garbage collection differently? I have a RAID controller w/ write caching. I will still benefit from this? Will this effect my setup differently? Is there anything I need to consider regarding SSD's in virtualized environments. Thanks for any and all help!

  Read the article

• Is there any chance that my data will get silently corrupted with a robocopy SMB network transfer?

  - by Archagon

  I'm setting up a NAS box for the first time. At the moment, I have most of my data backed up to a few local hard drives, and I intend to transfer all the data to my NAS over ethernet once the RAID array is setup. Since this is all happening over the network, I'm a bit worried about my data getting corrupted silently during transfer. From what I understand, data generally doesn't get corrupted without notice on local transfers because a checksum is performed at some point by the drive or the OS. (This could be totally wrong.) Does the same thing happen with SMB, or is it up to the transferrer to check the integrity of their data? And if it doesn't happen with SMB, is there a protocol that does ensure data integrity? I know that rsync can checksum a transfer, but I'm on Windows and I already have a robocopy configuration that I like. Will my data be safe or do I have to use an external checksum tool to make sure?

  Read the article

• Running out of space on a SAS-based workstation

  - by SteveWilkinson

  Hi - first question on serverfault - pls excuse if asked elsewhere. I have a Dell Precision 690 with one 73GB (15000RPM) SAS drive in it. Running Windows 7 (x64) with a bunch of apps means it is running out of space. I have on order a 147GB (15000RPM) SAS drive (same GB/s, same make) which I want to put into the machine. Not knowing anything about SAS, do I need to replace the 73GB with the 147GB and restore from a backup, or can I put the drive in the machine and get the controller to treat the two drives as one large one? (The original paperwork for the machine says 73GB SAS (No RAID) if that is relevant.) Thanks in advance.

  Read the article

• Running out of space on a SAS-based workstation

  - by SteveWilkinson

  Hi - first question on serverfault - pls excuse if asked elsewhere. I have a Dell Precision 690 with one 73GB (15000RPM) SAS drive in it. Running Windows 7 (x64) with a bunch of apps means it is running out of space. I have on order a 147GB (15000RPM) SAS drive (same GB/s, same make) which I want to put into the machine. Not knowing anything about SAS, do I need to replace the 73GB with the 147GB and restore from a backup, or can I put the drive in the machine and get the controller to treat the two drives as one large one? (The original paperwork for the machine says 73GB SAS (No RAID) if that is relevant.) Thanks in advance.

  Read the article

• Any recommendations on a NAS for a home-super-user?

  - by marc_s

  Can anyone recommend a good NAS for use in a home-server environment? I would request at least 2, preferably 4 disks, and I am most interested in good to excellent throughput for file-server and backup purposes - don't need any of the fancy media-streaming or -sharing features, that's not of interest to me. For a 4 or more disk solution, support for the various RAID levels (0, 1, 1+0, 5) would be a plus - especially if supported in hardware (rather than just a software emulation). I just need a place to put my collection of data, ISO images, and so forth - and since several external disks (self-built and off-the-shelf) have failed so far, I'm looking into a more reliable solution. Marc

  Read the article

• How can I tell if my live web-server is overloaded?

  - by Nick G

  We have a live webserver which doesn't seem to be performing all that well. It's a Dell PowerEdge machine, a few years old (dual core, 4GB) which is hosting about 20 low-traffic websites. However it doesn't seem to be as fast as it used to be. How can we determine the cause of this? If it's website traffic, I would be expecting high CPU but CPU usage is quite low and hovers around the 15-30% mark except for very brief periods. I'm wondering perhaps, if rather than CPU performance being a problem, perhaps it's disk thrashing due to the constant read/writes of all the small web files and database queries. It has 4x 7200 RPM SATA drives in RAID 5. So is there a way to check that it's not disk thrashing?

  Read the article

• URGENT: help recovering lost data

  - by Niels Kristian

  I have made a directory: sudo mkdir /ssd, the directory was supposed to be mounted to a raid array called md3. This was done by adding /dev/md3 /ssd auto defaults 0 0 to fstab. Then after a while where I had used the directory, I realized that I had forgotten to run sudo mount -a - and then I did, and now the data is gone. I tried to uncomment the line in fstab and run sudo mount -a but that didn't get back my data. What can I do!? CONTENT OF FSTAB: proc /proc proc defaults 0 0 none /dev/pts devpts gid=5,mode=620 0 0 /dev/md/0 none swap sw 0 0 /dev/md/1 /boot ext3 defaults 0 0 /dev/md/2 / ext4 defaults 0 0 /dev/md3 /ssd auto defaults 0 0

  Read the article

• Workstation Build: Single 2.66ghz i-7 with overclock potential, OR Dual 5520 2.26ghz Xeons?

  - by jdc0589

  There are probably better places to ask this, but I am used to the excellent quality of responses on stack overflow. I am rebuilding my desktop in a few months. Aside from normal lightweight internet usage, I use it to run sqlServer, mySql, 1-2 Ubuntu VMs from time to time, lots of IDE's, and a media server for my PS3. The two possible setups cost the exact same amount (within $50) and would both have 12gb 1333mhz ddr3 ram and a 500gb RAID-0 array (250x2). Now, If I go with a single i-7 920 2.66ghz quadcore, I can easily overclock it to 3ghz, and would have cash leftover to get a 160gb ssd (either the ocz vertex or the 120gb intel) for the main OS/Program install drive. Else, I could get a dual lga1366 motherboard with two e5520 Xeon's (2.26ghz),just use the disks I already have. So, do I go for 8 physical/16 virtual cores at 2.26ghz (No overclocking on server boards) with normal disk I/O, or a 4 physical/8 virtual cores at 3.0ghz with really outstanding disk I/O?

  Read the article

• How do I set up two existing disks with identical contents as a single mirrored volume in Windows 7 without losing data?

  - by Software Monkey

  I have two data disks that were, heretofore, in a mobo RAID configuration in Windows 7. They are now separate AHCI disks, visible in Computer Management. How to I go about making them a single mirrored volume in Windows? Note: The data is backed up up on two other separate disks, but it's a fair amount of work to do a restore (over 120'000 files, and I have to reset permissions). Note2: Currently the two disks are identical, and I can use the content of either one for this.

  Read the article

• One huge drive (network share) from many computers, with folder priority redundancy.

  - by Exception Duck

  Not sure if this exists, but I have a huge amount of data to store (about 5-50mb files) and as it is now, I have 5 computers, each with raid 5 providing about 6TB hard drive each. This is causing some problems with the software I am using (something home made) so I'm wondering, is there some software that I can install on all those computers that will mask it as one huge drive... Running windows on those computers, from Xp 64 bit to windows server 2008 I would also like to set a priority on each folder on the redundancy it has, some folders I can live without no online backup (I have a backup in a safe of that data) but some I need full online backup system if one hard drive fails. Something open source, as I try to use that as much as I can, but all ideas welcome.

  Read the article

• ESXI with non standard hardware HDD issues

  - by Hurricanepkt

  I have 3 very underutilized servers that I am condensing to one of those shuttle PC's with VMWare ESXi The HDD seems to be the bottle neck right now (the light is almost always pure solid) right now I have a single 1TB Seagate 7200.11 connected by SATA. VMWare ESXi cannot detect it when running in AHCI mode, but does when running in IDE mode. I have read that IDE mode can give a 5% performance hit which might give me enough breathing room. However, I am open to setting up an external eSATA or some sort of raid to give me more than just the 5%. I am just weary of sinking some money into a bit of hardware without knowledge of whether it will work. Does anyone know of resources or procedures of how to get this working.

  Read the article

• Distributed filesystem for automated offline data mirroring

  - by Petr Pudlák

  I'd like to achieve the following setup: Every time I connect my laptop to a local network, my partition gets automatically mirrored to a partition on my local server. I only want to mirror what has changed from the last time. (I understand that it is not a proper backup solution since there is no history of the changes, it'd be more like a non-persistent network RAID.) Is there a distributed file system that allows such a setup? I've done some searching and it seems to me that most distributed file-systems are focused on data availability and distribution, not duplicating them. I'd be thankful for suggestions. Edit: Sorry, I forgot to mention: I'm using Linux.

  Read the article

• Can SysPrep (or anything else) be used to make a Win XP partition from another computer bootable?

  - by chris5gd

  I've used Paragon Backup and Recovery Free as recommended to me in my other question, to backup my C: (Win XP) and D: (installed apps) partitions. Before taking the rather scary step of breaking the RAID 0 array on which it's currently installed, and restoring to one of the individual drives, I'd quite like to test the restorability of the imaged partitions. I've restored them on to a spare disk in another computer, which of course won't boot from them in their current state. Is it possible to use SysPrep (or another tool) on the restored partitions, to make it bootable?

  Read the article

• Best way to backup Active Directory with a single domain controller

  - by John Hall

  I have a domain with about 15 users and a single Windows Server 2008 domain controller. Some recent issues with my RAID controller have made me reconsider how I go about securing the AD data. Currently I run a System State Backup nightly. However, it seems that it is impossible (or at least difficult and unsupported) to restore that to any other machine than the one from which it was taken. Adding a second DC to the domain seems expensive and overkill for such a small network. Is there no other way to backup the AD data?

  Read the article

< Previous Page | 60 61 62 63 64 65 66 67 68 69 70 71  | Next Page >