Search Results

Search found 21097 results on 844 pages for 'check snmp'.

Page 646/844 | < Previous Page | 642 643 644 645 646 647 648 649 650 651 652 653  | Next Page >

  • Low 'Burst Rate' from SATA drive in HDTune?

    - by UpTheCreek
    I recently upgraded my laptop's v slow hard drive to a seagate momentus 7200. Everything is working fine, but I'm a bit confused by these benchmark results: The burst rate is significantly less than the Maximim transfer rate, and not much higher than the normal minimum (if you ignore the spikes). What's going on here? On the HDtune website it defines Burst Rate as: ...the highest speed (in megabytes per second) at which data can be transferred from the drive interface (IDE or SCSI for example) to the operating system. Which begs some questions... e.g. if this is the highest, then how did the bechmarking tool record the 103MB/sec maximum? And if this really is the true maximum, then where is the bottleneck? The laptops SATA interface is on an Intel 82801GBM southbridge controller. When I check in hardware manager, I see that it's driver is iaStor.sys from 2005. Maybe that's the issue? I'll look for a newever version, but any insights would be appreciated. Thanks UPDATE: Acorting to this page on the HDTune website... An important parameter of the test is the Burst Rate. This value should always be higher than the maximum transfer rate. A lower value is usually an indication of a configuration problem. So what might be the configuration problem?

    Read the article

  • Gentoo server time issue, can't manually set time, NTPD won't correct, too big of a time difference

    - by kevingreen
    So, my server is living in the future, unfortunately I can't get lottery numbers, or stock picks out of it. It thinks this is the time: Thu Nov 7 04:07:18 EST 2013 Not correct, I tried to set the time manually via date in a few ways # date -s "06 NOV 2013 14:48:00" # date 110614482013 -- same output, same problem Which outputs Wed Nov 6 14:48:00 EST 2013, but when I check the date again, it's still set to Nov 7th 0400 or whatever. I checked my system messages, and I see this pop up often: Nov 7 03:54:00 www ntpd[4482]: time correction of -47927 seconds exceeds sanity limit (1000); set clock manually to the correct UTC time. Which makes sense, we're way off the correct time. But I can't seem to manually fix it. So now what? Also, I'm wondering if my hardware clock is setup correct, hwclock doesn't return any values. Would that be causing issues? This is a virtualized server, I don't have direct access to the hypervisor, but I can talk to who does, assume I can explain myself well enough. Thanks

    Read the article

  • Iptables - forward email ports?

    - by Emmet Brown
    im trying to open some local ports (LAN) and then re-direct them to another server (WAN) using iptables. Here is my config: #WAN allow-hotplug eth1 auto eth1 iface eth1 inet static #Tarjeta red WAN address 192.168.2.2 gateway 192.168.2.1 netmask 255.255.255.0 #LAN allow-hotplug eth0 auto eth0 iface eth0 inet static address 192.168.16.6 netmask 255.255.255.0 network 192.168.16.0 broadcast 192.168.16.255 I try this: iptables -A PREROUTING -t nat -i eth0 -p tcp --dport 110 -j DNAT --to 200.40.30.218:110 iptables -A FORWARD -p tcp -i eth0 -o eth1 -d 200.40.30.218 --dport 110 -j ACCEPT iptables -A PREROUTING -t nat -i eth0 -p tcp --dport 25 -j DNAT --to 200.40.30.218:25 iptables -A FORWARD -p tcp -i eth0 -o ethq -d 200.40.30.218 --dport 25 -j ACCEPT but, it did not work. i also try changeing eth0 to eth1 (and eth1 to eth0) but nothing happened. Starting Nmap 5.00 ( http://nmap.org ) at 2011-10-03 14:44 UYST Interesting ports on 192.168.16.6: Not shown: 997 closed ports PORT STATE SERVICE 22/tcp open ssh 111/tcp open rpcbind 8080/tcp open http-proxy Im running debian. Can u guys help me to check what is happening? edit: IPTABLES-SAVE # Generated by iptables-save v1.4.8 on Mon Oct 3 15:43:14 2011 *mangle :PREROUTING ACCEPT [139993:77867651] :INPUT ACCEPT [139385:77761761] :FORWARD ACCEPT [186:12071] :OUTPUT ACCEPT [173556:74341650] :POSTROUTING ACCEPT [173734:74352988] COMMIT # Completed on Mon Oct 3 15:43:14 2011 # Generated by iptables-save v1.4.8 on Mon Oct 3 15:43:14 2011 *nat :PREROUTING ACCEPT [1649:190626] :POSTROUTING ACCEPT [6729:339646] :OUTPUT ACCEPT [6697:337660] -A PREROUTING -i eth0 -p tcp -m tcp --dport 110 -j DNAT --to-destination 200.40.30.218:110 -A PREROUTING -i eth0 -p tcp -m tcp --dport 25 -j DNAT --to-destination 200.40.30.218:25 COMMIT # Completed on Mon Oct 3 15:43:14 2011 # Generated by iptables-save v1.4.8 on Mon Oct 3 15:43:14 2011 *filter :INPUT ACCEPT [138307:77066136] :FORWARD ACCEPT [168:11207] :OUTPUT ACCEPT [172288:73655708] -A FORWARD -d 200.40.30.218/32 -i eth0 -o eth1 -p tcp -m tcp --dport 110 -j ACCEPT -A FORWARD -d 200.40.30.218/32 -i eth0 -o ethq -p tcp -m tcp --dport 25 -j ACCEPT COMMIT # Completed on Mon Oct 3 15:43:14 2011 Regards

    Read the article

  • MSSQL 2008 login failed for windows authentication

    - by Force Flow
    I'm running Microsoft SQL 2008 on a Windows 2008 Server. The MSSQL server server authentication is set to SQL Server and Windows Authentication mode. I have created an active directory security group "xyz app users". I have added a normal user (without any active directory admin privledges) and a user with domain admin privledges to the "xyz app users" group. I have added the group to the MSSQL management console as a login user. This group is a member of the public server role and is mapped to two databases. On a workstation, when the normal user is logged in, I configure a DSN ODBC connection, and I'm able to successfully create the DSN and test the SQL connection. However, when I'm logged in as the user with domain admin privledges, when I attempt to configure the DSN ODBC connection, I can't get past the login ID configuration screen. If I select "windows authentication" and click "next", I get an error: Connection failed: SQLState: '28000' SQL Server Error: 18456 [Microsoft][ODBC SQL Server Driver][SQL Server]Login failed for user 'mydomain\myuser' On the server's application event logs, this error appears: Login failed for user 'mydomain\myuser'. Reason: Token-based server access validation failed with an infrastructure error. Check for previous errors. [CLIENT: 172.x.x.x] And in MSSQL's event logs: Error: 18456, Severity: 14, State: 11 Solutions that I've seen so far do not seem to fit this situation (some solutions I've seen are only applicable when the BUILDIN\Administrator is being used locally on the server, which is not the case here).

    Read the article

  • Static DHCP binding

    - by Alex
    Good time of day, SF people. I have created a manual DHCP binding entry on a Cisco router so that a client would always get leased to it. The clients wants to get the same address on both of his dual-boot linux systems. He tries to get an IP address leased and he succeeds on one of the dual-boot operating systems. When he reboots to another one he gets a lease for a completely different one. I don't get it. The MAC addresses are the same (we checked in ifconfig, so what could be happening here? Why is the router confused? Or is it something else? Also, how can I check DHCP server IP address who I have got an IP address from (on Linux)? Configuration on Cisco: ip dhcp pool MANUAL_BINDING0001 host 192.168.0.64 255.255.255.0 hardware-address dead.beef.1337 dns-server 192.168.8.11 default-router 192.168.0.254 domain-name verynicedomainigothere.cn PS. Is it mandatory to use client-name configuration line?

    Read the article

  • Nagios: turn off service checks/display on down hosts

    - by Alien Life Form
    I want to to tweak nagios in such a way that all checking stops (with services not displayed, or displayed as unknown) for any down node. Said differently I only want to see one alert for a down host instead of 1 (down) + n (1 for every service). Note that I am interested in service display/status, not only in turning off notifications. Rationale: we use the nagios firefox/chrome plugin to monitor status and nagios' behavior is too noisy giving readings like these (because every node has 20 services): 3 down, 1 unreachable, 4 warnings, 87 critical This means that the 7 critical services on up node (the problem is on the service) are swamped in a slab of red services which are critical only because they sit on a node that's down/unreachable. What I'd rather like to see is: 3 down, 1 unreachable, 80 unknown, 4 warnings, 7 critical Or even 3 down, 1 unreachable, 4 warnings, 7 critical I have looked in service dependencies but I did not fine a way to describe: "make all services on a alive-host dependen on the status of the host check". I found the problem discussed here, where one of the participants thought it was a nagios bug, and here where one of the participants thought it was "as designed". As things are, I am just interested in the effect, much less in the design philosophy. Note that this nagios is checking hundreds of nodes, so the maintainablilty of the solution is also important. TIA and cheers.

    Read the article

  • Website and file/directory permissions

    - by mathiass
    I've been given a task to fix this one website. One of its issues is that on one page, the images have broken links - the images are not showing, and clicking on the image (i.e. direct link to the image file) results in a 403 (Forbidden) error. I am looking for some feedback on what could be the possible cause. The directory where the images are stored has the following permissions: drwxrws--- www "group" 10240 Aug 2008 "image directory name" I had to hide the names. I checked the page source code, and everything seems to be in place. The rest of the site, and other images outside that image directory are showing fine. I was told that recently there have been some changes to the server. I'm trying to assume that there is no fault in the source code, and the permissions are - or used to be - correct (since the site has been working before, and no recent changes to the site itself have been made). My only thoughts at the moment is that either: a) the directory permission should be: drwxrws--x (executable) for the other users, or b) there is a change in the server settings that I don't know of. Is there anything else I should check?

    Read the article

  • Understanding MySQL Query Caches and when to implement it?

    - by Jeff
    On our current MySQL server query cache is enabled. Qchache_hits: 31913 Qchache_inserts: 50959 Qchache_lowmem_prunes: 9320 Qchache_not_chached: 209320 Qchache_queries_in_chace: 986 com_update: 0 com_delete: 0 I do not fully understand the Query cache - I am reading about it currently and trying to understand it. Our database holds inventory data, customer data, employee data, sales data and so forth. The query is very rarely run more than once. The possibility of a query being run twice is viewing a specific sales information twice. But basically everything in our system changes constantly. It is always being updated, deleted, insterted and off the top of my head I can't picture users running the same query twice within a week. Do I even need to have the query cache enabled? I am guessing that the inserts means 51k entries have been added, but only 986 of those are being stored? Would an idea be to refresh the cache, and watch it for a week and check how many of the queries in cached are accessed maybe on a weekly basis to see if it is actually returning any benefits? Any help/guidance on this is appreciated, thanks

    Read the article

  • Using a second Wifi Router (in order to use a LAN port)

    - by Sledge81
    Problem: Connecting a TV decoder via Internet. It doesn't have inbuilt wifi so wired LAN is the only option. I bought a second Wifi Router so I could use its LAN port to create a wired internet connection to my decoder. What I want to achieve: The second Wifi Router should basically pick up the signal from the main wifi router. I would then use the LAN port to connect (with a wire) to the TV decoder. In other words have my secondary Wifi Router act as an access point, which will enable me to use a wired LAN connection to the decoder. What i've done so far: Connected the second Wifi Router to my laptop via the LAN ports. Access 192.168.1.1 and went into my second router. 1) SSID set to the same one as the main Wifi Router 2) Tried disabling DHCP and enabling DHCP (with the DNS and default gateway configured the same as the main router). When I check my network connections, I see the LAN connection too but it says 'Not connected to the internet' while the Wifi (main router) shows connected. Can someone please advise on how to use my second Wifi Router to connect to the main Wifi Router (and thus the Internet). Thanks. main wifi router: Zyxel secondary wifi router: TP Link

    Read the article

  • Creating MS Word 2010 Relative Links?

    - by leeand00
    Okay here is what I've tried so far for creating relative links in my MS Word Documents. In my document from the ribbon I select the File tab. I then select Info from the side bar. Click the properties drop down from the right hand column. (a bit difficult to find initially, since it looks like text not a drop down, but it's there). Click Advanced Properties The <document-name>.docx Properties Dialog Appears I enter .\ to specify that I want a relative path for the links in my document. I click OK. I go back into my document select some text and attempt to make a link out of it clicking the Insert tab of the ribbon, and then clicking Hyperlink. I then select a document from the current folder, and strip the full path from it, leaving just the name of the .docx file to which I wish to link. Then I click OK. The link appears, I try to click it using Ctrl+Click. I am informed that the address of the site is not valid. Check the address and try again. What could I possibly be doing wrong here? I just want a relative link. It's so easy in to do this in HTML.

    Read the article

  • Advanced cell selection in Excel

    - by Supuhstar
    I am new to this flavor of StackExchange, so if this belongs elsewhere, please move it; I figured this would be the best place, though. I am making an Excel Worksheet that simply stores basic financial data in 5 columns (Check Number, Date of Transaction, Description, Profit from Transaction, and Balance After Transaction) and indefinite rows. Each worksheet represents one month, and each Workbook represents a year. As I make or receive a payment, I store it as a new row, which, inherently, makes the number of rows per month indefinite. Each transaction's Balance cell is the sum of the Balance cell of the row above it and the Profit cell of its row. I want each month to start off with a special row (first one after column headers) that displays a summary of the last month's transactions. For instance, the Balance After Transaction cell would display the last row's balance, and the Profit from Transaction cell would display the overall profits of the month) I know that if I knew every month had exactly 100 expenses, I could achieve this for March with the following formulas for profit and balance, respectively: =February!E2 - February!E102 =February!E102 However, I do NOT know how many rows will be in each month's table, and I'd like to automate this as much as possible (for instance, if I find a missed or duplicated expense in January, I don't want to have to update all the formulas that point to the ending January balance). How can I have Excel automatically use the last entered value in a column, in any given Excel spreadsheet, in a formula?

    Read the article

  • SVN very slow over HTTP (seems auth related)

    - by Sydius
    I'm using SVN version 1.6.6 (r40053) via the command-line in Ubuntu 10.04 and connecting to a remote repository over HTTP that is in the local network. For a while, it worked fine, but has recently become very slow for any operation that requires communication with the repository, however it does eventually work after several minutes (~3m for svn up). Looking at Wireshark, it appears to be taking a full minute between the HTTP auth denied and the subsequent request containing credentials. The issue is local to my machine because other coworkers running Ubuntu are not having the issue and I've tried using my credentials from another machine and it was very fast. I tried deleting the .subversion folder in my home directory and checking everything out fresh, but it didn't help. Update: I think it's auth related. When I check out SVN repositories off of the Internet over HTTP (from Google Code, for example), everything is very fast until I do something that requires a password. Before prompting for the password for the first time, it stalls for at least a minute. Update 2: I set the neon-debug-mask in the SVN settings (in /etc/subversion/servers under [Global]) to 138 and it seems to spending a lot of time on 'auth: Trying Basic challenge...'

    Read the article

  • Can't start my phpMyAdmin

    - by vrynxzent
    i am creating my own portable server but i can't make it to run the phpMyAdmin, the mysql, php and apache is running except for phpMyAdmin. When i check Apache's error log, it states [Fri Nov 09 08:54:37 2012] [warn] pid file F:/Drive WebServer/Drive WebServer/bin/Debug/Apache2bak/logs/httpd.pid overwritten -- Unclean shutdown of previous Apache run? PHP Warning: PHP Startup: Unable to load dynamic library './php_mysql.dll' - The specified module could not be found.\r\n in Unknown on line 0 PHP Warning: PHP Startup: Unable to load dynamic library './php_mysqli.dll' - The specified module could not be found.\r\n in Unknown on line 0 [Fri Nov 09 08:54:37 2012] [notice] Apache/2.0.64 (Win32) PHP/5.2.17 configured -- resuming normal operations [Fri Nov 09 08:54:37 2012] [notice] Server built: Oct 18 2010 01:36:23 [Fri Nov 09 08:54:37 2012] [notice] Parent: Created child process 6784 i manually assign the exact path for this F:/php/ext/php_mysql.dll PHP Warning: PHP Startup: Unable to load dynamic library 'F:/php/ext/php_mysql.dll' - The specified module could not be found.\r\n in Unknown on line 0 but still the same error. i set this option in php.ini extension_dir = "./" another error goes pops out It says libmysql.dll is missing. PHP Version : 5.2.17 Any help would be appreciated. ;)

    Read the article

  • File Acces\Rename Issue

    - by Moon .
    Guys, i am having serious problem with media files (only video files). When i try to rename or delete a Files or the Folders that contained media files, i get an error. "Access Denied .... Some other program might be using this file..... bla bla bla" Previously for this knida problem i had a freeware "Unlocker" that used to work. What "Unlocker" used to do was simply kill the process that is using the file. But in my case, now that is, the process using the files is "Explorer.exe" W.T.F... A strange behavior, when i copy paste the same file. The copied file, I can rename it, i can delete it, i can shit on it if i want to.... but what is wrong with the original file. Check the following list. It will give you a better idea of my situation. I am using Win XP SP 2 I have got Div Player installed (latest) The media files are from both, my hard drive, created by many of my previous window installations. And new downloaded files. So Files ownership or Privacy is not an issue. I may not be able to rename\delete those files one moment, the next moment, in the next try, i might succeed. The problem is a major F. i can't figure it out. Please F1! its getting on my nerves.

    Read the article

  • Network outage caused by SMC8013WG Cable Modem/Router ?

    - by mkocubinski
    At work, we have a basic Class C Network. The gateway/router is a SMC8013WG (stock comcast commercial cable modem), and simple unmanaged switch (HP Pro Curve 1400 24G). The SMC8013WG is our default gateway as well as DHCP server. Periodically, I'd say almost every other day.. the entire network will just stop responding. I won't be able to ping/see the gateway, any computers on our local network, or anything on the internet. The only way to fix this is to unplug the Comcast cable modem, wait, and plug back in. This unfailingly fixes the problem. But this doesn't make much sense to me.. shouldn't the network still be fine locally, since everything is plugged into the switch anyway? Why would resetting the router fix this? Can anyone suggest anything to check to in order to narrow this problem down? Just to be clear.. here is the basic topology: { Internet } -- (12.345.67.89) Comcast Cable Modem (192.168.1.1) -- Switch -- 192.168.1.2-254 P.S. Our IT guy is in about 3 hours a day every other week or so, so.. we're kind of on our own most of the time.

    Read the article

  • How can I get Solr listening on 0.0.0.0 instead of just localhost?

    - by Neil
    I'm trying to get Solr to listen on 0.0.0.0 instead of just localhost, and it doesn't seem to be picking up the configuration options. I downloaded apache-solr-1.4.1 from the Solr website, and I'm running: user@:apache-solr-1.4.1/example $ java -jar start.jar With these configuration options: <Call name="addConnector"> <Arg> <New class="org.mortbay.jetty.bio.SocketConnector"> <Set name="host"><SystemProperty name="jetty.host" default="0.0.0.0" /></Set> <Set name="port"><SystemProperty name="jetty.port" default="8983" /></Set> <Set name="maxIdleTime">50000</Set> <Set name="lowResourceMaxIdleTime">1500</Set> </New> </Arg> </Call> Where the only line changed from the default is this one: <Set name="host"><SystemProperty name="jetty.host" default="0.0.0.0" /></Set> And when I check netstat, I see this: $ netstat -an | egrep 'Proto|\b8983\b' Proto Recv-Q Send-Q Local Address Foreign Address State tcp 0 0 127.0.0.1:8983 0.0.0.0:* LISTEN tcp6 0 0 ::1:8983 :::* LISTEN Where Local Address should be 0.0.0.0:8983 instead of 127.0.0.1:8983. Does anyone know why this might not be working?

    Read the article

  • Windows Server don't connect to network share

    - by user104775
    Windows Server don't connect to network share. Network share is work. Ping Blockquote Pinging 109.123.146.223 with 32 bytes of data: Reply from 109.123.146.223: bytes=32 time<1ms TTL=63 Reply from 109.123.146.223: bytes=32 time<1ms TTL=63 Reply from 109.123.146.223: bytes=32 time<1ms TTL=63 Ping statistics for 109.123.146.223: Packets: Sent = 3, Received = 3, Lost = 0 (0% loss), Approximate round trip times in milli-seconds: Minimum = 0ms, Maximum = 0ms, Average = 0ms net view \shareaddress Blockquote System error 53 has occurred. The network path was not found. When network share was connected, I was got a error message: Blockquote \ "Mapped disk letter" refers to a location that is unavailable. It could be on a hard drive on this computer, or on a network. Check to make sure that the disk is properly inserted, or that you are connected to the Internet or your network, and then try again. If it still cannot be located, the information might have been moved to a different location Network share mounted via Group Policy. Any ideas?

    Read the article

  • Nagios escalation debugging

    - by Oesor
    I'm having some issues with escalations happening properly and I'm not sure if it's because of my config or because the nagios binary is nonstandard and something may be broken. I've got little experience with nagios, and just want to make sure this is being set appropriately. Should the following config file definition allow the escalations to take over and increment the notification interval as expected? Is there somewhere else in the config files I should be looking at to figure out what's going on? I've enabled debug 32 in the config and it's simply spitting out 'Host notification will NOT be escalated.' for each notification. The configuration does pass the pre flight check with no issues, and reports that it's parsing the three host escalations in the config. # test host definition define host { host_name test alias test address 10.0.0.10 hostgroups test check_interval 0 retry_interval 1 max_check_attempts 2 flap_detection_enabled 0 icon_image windows.png icon_image_alt LOGO - Windows vrml_image windows.png statusmap_image windows.png action_url /info/host/275 check_period 24x7 contact_groups hostgroup15_servicegroup1,hostgroup15_servicegroup10,hostgroup15_servicegroup13,hostgroup15_servicegroup14,hostgroup15_servicegroup2,hostgroup15_servicegroup3,hostgroup15_servicegroup4,hostgroup15_servicegroup42,hostgroup15_servicegroup45,hostgroup15_servicegroup46,hostgroup15_servicegroup47,hostgroup15_servicegroup5,hostgroup15_servicegroup8,hostgroup15_servicegroup9,ov_monitored_by_master check_command check_host_15!-H $HOSTADDRESS$ -t 3 -w 500.0,80% -c 1000.0,100% parents nagios notifications_enabled 1 notification_interval 3 notification_period 24x7 notification_options u,d,r use host-global } define hostescalation{ host_name test first_notification 3 last_notification 4 notification_interval 10 contact_groups hostgroup15_servicegroup1,hostgroup15_servicegroup10,hostgroup15_servicegroup13,hostgroup15_servicegroup14,hostgroup15_servicegroup2,hostgroup15_servicegroup3,hostgroup15_servicegroup4,hostgroup15_servicegroup42,hostgroup15_servicegroup45,hostgroup15_servicegroup46,hostgroup15_servicegroup47,hostgroup15_servicegroup5,hostgroup15_servicegroup8,hostgroup15_servicegroup9,ov_monitored_by_master } define hostescalation{ host_name test first_notification 4 last_notification 5 notification_interval 30 contact_groups hostgroup15_servicegroup1,hostgroup15_servicegroup10,hostgroup15_servicegroup13,hostgroup15_servicegroup14,hostgroup15_servicegroup2,hostgroup15_servicegroup3,hostgroup15_servicegroup4,hostgroup15_servicegroup42,hostgroup15_servicegroup45,hostgroup15_servicegroup46,hostgroup15_servicegroup47,hostgroup15_servicegroup5,hostgroup15_servicegroup8,hostgroup15_servicegroup9,ov_monitored_by_master } define hostescalation{ host_name test first_notification 5 last_notification 0 notification_interval 240 contact_groups hostgroup15_servicegroup1,hostgroup15_servicegroup10,hostgroup15_servicegroup13,hostgroup15_servicegroup14,hostgroup15_servicegroup2,hostgroup15_servicegroup3,hostgroup15_servicegroup4,hostgroup15_servicegroup42,hostgroup15_servicegroup45,hostgroup15_servicegroup46,hostgroup15_servicegroup47,hostgroup15_servicegroup5,hostgroup15_servicegroup8,hostgroup15_servicegroup9,ov_monitored_by_master }

    Read the article

  • What should I use to ping multiple IPs and get notified of time outs?

    - by HumanVirus
    I've been using MultiPing to ping hundreds of IPs (from access points and such) and check their performance (packet loss, latency) and uptime. The program is very easy to use, but I was wondering if someone could recommend me something that would work better and that would also work in Linux. The features I'm looking for are: Notification Types: At least desktop notifications and SMS, but it would be great if it also had e-mail, IM, or other types of notifications. (MultiPing has some of these, but they don't work too well.) Being notified about the root problem only: Since some devices are dependent on others, I'd like to be notified only about the root problem. E.g. Let's say I have A[x.x.x.222]B[x.x.x.33C[x.x.x.44]D[x.x.x.55], and B goes down, therefore C and D will also be down. Is it possible to get a notification only about B being down? Light on resources. Ideally multiplatform or at least available for both Linux and Windows. I've heard about Nagios and Shinken being used for monitoring. Would you recommend that I use something of the sort or would that be too much for my needs? If using Nagios, Shinken, or similar software is recommended, can anyone tell me what sites I should go to or what books I should get that would be good for someone who is totally new at this? I'd appreciate any suggestions.

    Read the article

  • Windows Server 2008 Alerting to Low memory

    - by t1nt1n
    I have a file and print server running on Windows 2008 R2 fully patched in a VSphere environment (ESXi 5.1 fully updated). Every evening between 19:20 and 19:30 our monitoring software reported that the available memory is 1% and performance is dire. There is nothing in the event logs to point to an issue. At this point in the evening I am general the only user on the system to check to see why these alerts are going off. Things I have done; Checked to see if any backups are running – None at all. Checked Scheduled tasks – None before or during this time period. Moved the VM to another host. AV is disabled to rule out that as the issue. The server does not have any problems during the day with memory when fully loaded with about 50 users. The server did have 4GB ram provisioned but I have increased this to 5Gb. Running PrefMon at the time (I will save the graphs tonight) There very little CPU usage at the time but RAM usage goes up.

    Read the article

  • What can cause the system to freeze in a way where even the reset button takes a long time to react?

    - by ThiefMaster
    What can be the reason for system freezes that are so "hard" that even the hardware reset button takes about 3 seconds until it actually resets the system (and then it actually powers down and up again instead of doing a "clean" hard reset like when pressing it during a normally running system). Since it initially happened mainly while playing videos from YouTube I suspected the graphics card - however, I replaced it recently and it did not change it. It still happens from time to time (and sometimes more often, like a few times times in the last few hours). The system is running Windows 7 - but I don't think this matters since I don't think any software, not even the OS, can actually affect the reset button's behaviour. The PC is not overheated and the freezes happen randomly. There is also no malware on the system. The CPU is an Intel Core i7-920 on a Gigabyte EX58-UD5 mainboard. What could be the cause for this problem? Faulty RAM? I did not run a full memtest86 check yet, but I wonder if there is a more likely issue than faulty RAM - checking 12G of ram does take some time after all! There are no entries in the event log - but that's what I expected since the system freezes so hard that I doubt it has time to write anything to any log.

    Read the article

  • Windows 7 : access denied to ONE server from ONE computer

    - by Gregory MOUSSAT
    We have a domain served by some Windows 2003 servers. We have several Windows 7 Pro clients. ONE client computer can't acces ONE member Windows 2003 server. The other computers can acces every servers. And the same computer can access other servers. With explorer, the message says the account is no activated. With the command line, the message says the account is locked. With commande line : net use X: \\server\share --> several seconds delay, then error (says the account is locked) net use X: \\server\share /USER:current_username --> okay net use X: \\server\share /USER:domain_name\current_username --> okay From the same computer, the user can access other servers. From another computer, the same user can access any server, including the one denied from the original computer. Aleady done : unjoin then join the cilent from the domain. check the logs on the server : nothing about the failed attempts (?!) Is their any user mapping I'm not aware of ?

    Read the article

  • strange Kernel Process Threads taking over my AIX box....

    - by Paul
    When I check the Running Stats of my box I get the following: CPU User% Kern% Wait% Idle% Physc 0 37.5 57.4 0.0 5.1 0.01 2 0.0 18.3 0.0 81.7 0.00 3 0.0 22.5 0.0 77.5 0.00 4 0.0 17.0 0.0 83.0 0.00 5 0.0 20.5 0.0 79.5 0.00 6 0.0 33.7 0.0 66.3 0.00 7 0.0 4.4 0.0 95.6 0.00 8 0.0 19.3 0.0 80.7 0.00 9 0.0 22.3 0.0 77.7 0.00 10 0.0 19.2 0.0 80.8 0.00 1 0.0 1.3 0.0 98.7 0.00 11 0.0 21.8 0.0 78.2 0.00 21 0.0 62.9 0.0 37.1 0.00 12 0.0 21.1 0.0 78.9 0.00 13 0.0 22.7 0.0 77.3 0.00 14 0.0 18.1 0.0 81.9 0.00 15 0.0 21.2 0.0 78.8 0.00 16 0.0 19.1 0.0 80.9 0.00 The Kern% seems high to me and I cannot find a reason for this much Kernel activity.... Doing a deep dive into what User processes are doing I find nothing with significant CPU utilization even though TOPAS and SAR both show the same thing.... One CPU with 30-60 % user and every processor with 5-30% Kernel % utilization... What is my box doing??? here is a second sample of CPU % from TOPAS CPU User% Kern% Wait% Idle% Physc 0 67.8 31.4 0.1 0.7 0.14 2 0.0 18.2 0.0 81.8 0.00 3 0.0 20.3 0.0 79.7 0.00 4 0.0 17.3 0.0 82.7 0.00 5 0.0 20.7 0.0 79.3 0.00 6 0.0 39.2 0.0 60.8 0.00 7 0.0 5.0 0.0 95.0 0.00 8 0.0 17.9 0.0 82.1 0.00 9 0.0 22.0 0.0 78.0 0.00 10 0.0 18.0 0.0 82.0 0.00 1 0.0 0.7 0.0 99.3 0.02 11 0.0 21.7 0.0 78.3 0.00 21 0.0 21.7 0.0 78.3 0.00 12 0.0 17.0 0.0 83.0 0.00 13 0.0 21.1 0.0 78.9 0.00 14 0.0 17.8 0.0 82.2 0.00 15 0.0 21.8 0.0 78.2 0.00 16 0.0 17.6 0.0 82.4 0.00 Any ideas to help identify what is running in the Kernel Space would be great....

    Read the article

  • Burning Linux ISO to DVD and making it bootable.

    - by toc777
    Hi everyone, I just downloaded the Fedora 14 Live-Desktop ISO and used CDBurnerXP to burn the image to a DVD. For some reason the first time I burned the image nothing showed up on the DVD when I accessed it even though CDBurnerXP said it had successfully burned to the disk. I did it again and the ISO shows up on the disk (I don't think this is right, should it be the files inside the image that show up on disk or the image file??). The problem now is my dell PC can't find the ISO when I try to boot from it. I get an error saying it can't boot from the CD. I have verified the ISO image as directed from the Fedora website. My question is how do I make a bootable CD from a Fedora Live-Desktop ISO? How can I verify that the ISO was written to the CD correctly and has anyone had any issues booting from a CD using a Dell desktop (I'm not at home at the moment so I can't check what model it is but its old enough, I've had it for about 5 years). EDIT: All that needed to be done was to burn the image to CD as an image and not a data file. The first three times failed, I'm not sure if this was because of faulty DVD's or if the write speed was too high (16x). I put in a new DVD and changed the write speed to 8x, the image was then properly burned to the disk without any errors. Thanks.

    Read the article

  • Using Monit to monitor Resque

    - by Alex
    I'm trying to use resque as a job runner for Rails. I've tried this config, and many other ways of demonizing the rescue task (because running rake resque:work leaves the terminal tied to that command). Unfortunately, their example configuration doesn't work for me. Does the configuration look correct? Or is there another way to turn the process into a daemon? Thank you :) check process resque_worker_QUEUE with pidfile /data/APP_NAME/current/tmp/pids/resque_worker_QUEUE.pid start program = "/bin/sh -c 'cd /data/APP_NAME/current; RAILS_ENV=production QUEUE=queue_name VERBOSE=1 nohup rake environment resque:work& > log/resque_worker_QUEUE.log && echo $! > tmp/pids/resque_worker_QUEUE.pid'" as uid deploy and gid deploy stop program = "/bin/sh -c 'cd /data/APP_NAME/current && kill -s QUIT `cat tmp/pids/resque_worker_QUEUE.pid` && rm -f tmp/pids/resque_worker_QUEUE.pid; exit 0;'" if totalmem is greater than 300 MB for 10 cycles then restart # eating up memory?

    Read the article

< Previous Page | 642 643 644 645 646 647 648 649 650 651 652 653  | Next Page >