check snmp - Page 644 - Developer IT

What does the 'Burst Rate' stat mean in HDTune?

- by UpTheCreek

I recently upgraded my laptop's v slow hard drive to a seagate momentus 7200. Everything is working fine, but I'm a bit confused by these benchmark results: The burst rate is significantly less than the Maximim transfer rate, and not much higher than the normal minimum (if you ignore the spikes). What's going on here? On the HDtune website it defines Burst Rate as: ...the highest speed (in megabytes per second) at which data can be transferred from the drive interface (IDE or SCSI for example) to the operating system. Which begs some questions... e.g. if this is the highest, then how did the bechmarking tool record the 103MB/sec maximum? And if this really is the true maximum, then where is the bottleneck? The laptops SATA interface is on an Intel 82801GBM southbridge controller. When I check in hardware manager, I see that it's driver is iaStor.sys from 2005. Maybe that's the issue? I'll look for a newever version, but any insights would be appreciated. Thanks

Read the article

Windows won't boot after moving house. How do I solve this?

- by James

Ive just moved house and tried to set up my desktop after packing it away and now when I power it on, the BIOS boots up and no errors are found but when my computer tires to boot into Windows 7 a continuous fast beeping sound is made and a black screen is displayed. What I've done so far: Reset to UEFI defauts Played about with RAM, I had 4*4 GB sticks, I took all of them out to test for a mobo error which I have and now im only using 1 stick of 4 GB. Changed my GPU, I tok my gtx580 out and now im using the onboard Intel 3000 graphics driver, the BIOS and uefi are correctly displaying so I no longer think its a GPU based error. Ive check all of the connections and nothing seems to be loose. My HDD setup is: 2 128 GB SSD's in Raid 0 as my main C drive (possibly cause of error?) 1 1 TB Games drive 1 2 TB Data Drive Ive also got a blueray drive connected. After searching the internet im pretty much out of suggestions but im currently downloading a live CD to see if it will boot and if I can access some files on my HDD.

Read the article

mysql - moving to a lower performance server, how small can I go?

- by pedalpete

Read the article

Hardware testing tool/suite

- by Aviator

Hi All, I just bought a new core i5 system (assembled) and started installing Windows 7. It was failing for many times and at some point got installed. After that, frequent crashes related to MEMORY. So checked the RAM using memtest86+ and found many errors.I got it replaced with the vendor and now if i install ANY OS, at some point in installation it either freezes completely with no response for hours, or restarts automatically. I tried installing Windows 7, Windows Vista and Ubuntu 9.10. I tested the new RAM again and found no problems in about 2 passes using memtest86+. I even updated the BIOS using bootable USB and even the problem persists. I am really not sure which hardware is causing trouble. I dont have any OS inside it, so i have to check using bootable CDs DVDs and USB only. Please advice on how to proceed. Are there any suites/ separate tools for checking integrity of each hardware parts and troubleshoot it? I wanted to confirm which part is problematic before going for replacement. Thanks a lot! This is the config: Core i5, MSI P55-GD65, GSKill 2x2GB, Seagate 500GB 7200rpm, CM Extreme 600W PSU, Saphhire Radeon 5770 1GB, LG DVD Writer

Read the article

mysqldump --where with = operator doesn't get all rows = - Help!

- by JonathanLIVE

I have a situation with a particular table that now thinks it contains 4 Petabytes of data. I know that sounds cool, but I assure you, it is only on a 60GB partition. This table has 9 fields in it. One of them is a domain_id field. It is the best field to identify the rows by, as there are only approximately 6300 of them. The only other field option to match has over 2million records, and thats just more difficult. I cannot do a straight mysqldump because it will attempt to output all 4PB of data and fill the drive long before it gets close to that, so I need to surgically remove the good stuff, destroy the db, and recreate it. I believe if I can do a dump for each domain_id record, then I will get most of the usable data out of it. This is what I am trying to use: mysqldump -u root --skip-opt -q --no-create-info --skip-add-drop-table --max_allowed_packet=1000000000 database table --where="domain_id=10" domains10.sql Using this I expect every row with the domain_id 10 to be exported. However, when I check the export, I am only getting 1 row, when however I look at the db, there are many many rows. It is as though the operator just finds one, then gives up. I have tried various operators. Using the < or I am able to get more of the data, but the export stops short at certain rows where the data has been compromised. With over 6000 to go through, I can't narrow down which rows are being affected in the export easily enough. So, what I need is an operator that will basically do what I thought = would do, simply give me an export of all records that match the specific field. Also note, the only way I got this DB even accessible is through an innodb force recovery 3. So I need to get this right, because after this is done, I have to drop the db in order to make mysql functional again. Looking forward to any helpful answers.

Read the article

How to setup bindings for development IIS 7.5 with lot of sites

- by Antonio Bakula

I am a programmer in a small ASP.NET shop with very little expirience in server administration, and I have to setup IIS 7.5 to host lot of sites on newly installed windows server 2008 R2, these sites are test "clones" for sites on "real" web server and they should be accessible only in local network (domain). Developers should add new sites for our new customers. Project managers use this server to check progress and test new sites and new features, QA people have to have access to this site and test before we copy it to the "real" web server. Developers only have access to IIS console, in fact they can use RDP to test server with their developer domain credentials and permissions, also developers are local admins on that machine (tester). On our previous server I used different port numbers for each site. That worked but don't like this solution, I would prefer to use subdomains. But here are the problems: manually adding DNS records is not an option because we do not wont that developers have to administer domain DNS server, and currently this had to be done with domain administrator credentials. Is there a some way to add DNS record automatically ? I tried to add DNS record for subdomains on test server with wildcard (*.tester) and that seems to work for some time but that change coused some bad problems in our domain network and admin forbid me to mess with DNS, he said that I have to add DNS record for every subdomain manually and that I can not use wildcards, and there is nothing that I can do about it, mainly for "politicall" reasons :( obviously our admin is pretty much uncooperative, outsorced from different organization and I can't do anything about that. can I add another DNS server on that machine ? What must be setup on clients machines to "tell" them to use domain DNS server and tester domain server ? So please I need someone to give me some advice, what should I do ? Is different port numbers only option left ? Thanks !

Read the article

Fix stubborn 'Setting locale failed.'

- by user60129

I have a very stubborn, well-known locale error on Ubuntu 9.10: perl: warning: Setting locale failed. perl: warning: Please check that your locale settings: LANGUAGE = (unset), LC_ALL = (unset), LC_TIME = "custom.UTF-8", LANG = "en_US.UTF-8" Tried the following: Added LANG=en_US.UTF-8 and LC_ALL=en_US.UTF-8 to /etc/environment Run apt-get install --reinstall locales (error: perl: warning: Falling back to the standard locale ("C"). /usr/bin/mandb: can't set the locale; make sure $LC_* and $LANG are correct) Run sudo dpkg-reconfigure locales. Result: Cannot set LC_ALL to default locale: No such file or directory, and then updates locales all locales including en_US.UTF-8 sudo locale-gen updates all locales successfully, including en_US.UTF-8 sudo locale-gen un_US en_US.UTF-8 gives no error nor other output In /etc/default/locale it says LANG="en_US.UTF-8" echo $LANG gives en_US.UTF-8 /var/lib/locales/supported.d/local says en_US.UTF-8 UTF-8 locale -a gives me: C en_AG en_AU.utf8 en_BW.utf8 en_CA.utf8 en_DK.utf8 en_GB.utf8 en_HK.utf8 en_IE.utf8 en_IN en_NG en_NZ.utf8 en_PH.utf8 en_SG.utf8 en_US.utf8 en_ZA.utf8 en_ZW.utf8 POSIX So well... I am pretty much out of options I can think of. Anybody any idea?? Thanks!

Read the article

Is it possible to trace someone using Google during an online exam?

- by George

I happen to be a professor at a reputed college. I want to design an online exam for over 1000 students via around 50 computers right after the vacation ends. Now the problem is that I have heard that many students use Google on a different tab to find answers when no invigilator is around. I want to know if there is a way to backtrace it after the exams via some kind of history or any other possible way. In our university there is a standard system. I am not good with computers but I will try to explain. Each computer uses mozilla to connect to a server centrally located via an IP. The students open it and enter a unique ID and password to start the exams. Many questions are jumbled and different groups of students give exam in a different time slot. Is there any way to trace it since I want to set an example for students so they won't cheat and give exams in an honest way. Additional details: Since the number of computers are less than the number of students, more than 10 students are going to use a single computer on a single day over a period of 10 hours. After this, if I check the history (and let's say someone even forgot to delete the history and I see it), will I able to figure out who among the 10 has done it? Moreover, is it even practical and feasible?

Read the article

Need a helpful/managed VPS to help transition from shared hosting

- by Xeoncross

I am looking for a VPS that can help me transition out of a shared hosting environment. My main OS is Ubuntu, although I am still new to the linux world. I spend most of my day programming PHP applications using a git over SSH workflow. I want PHP, SSH, git, MySQL/PostgreSQL and Apache to work well. Someday after I figure out server management I'll move on to http://nginx.org/ or something. I don't really understand 1) linux firewalls, 2) mail servers, or 3) proper daily package/lib update flow. I need a host that can help with these so I don't get hit with a security hole. (I monitor apache access logs so I think I can take it from there.) I want to know if there is a sub $50/m VPS that can help me learn (or do for me) these three main things I need to run a server. I can't leave my shared hosts (plural shows my need!) until I am sure my sites will be safe despite my incompetence. To clarify again, I need the most helpful, supportive, walk-me-through, check-up-on-me, be-there-when-I-need you VPS I can get. Learning isn't a problem when there is someone to turn too. ;)

Read the article

Sendmail slow to accept emails

- by Rich

I have a PHP web app which is using SMTP to sendmail on localhost to send email. I would like sendmail to accept the mail request immediately and queue it for later sending, as I don't want to have user-facing request threads blocked on emails. Sendmail is installed with the default settings on RHEL web servers. Sometimes sendmail is blocking for a long time after the MAIL command is sent -- sometimes taking 60 or 90 seconds to accept the mail. The time take is usually very close to 60 or 90 sec, which makes me think this is some kind of timeout. I have looked in the sendmail logs, and there are plenty of "deferred" emails, but nothing which looks responsible for this delay. How can I diagnose what is slowing down sendmail? How can I configure sendmail to always accept the mail immediately and to queue the mail for later sending? Update: I'm not sure, but it looks like this might be linked to aol.com addresses. I strongly suspect that sendmail is doing some kind of blocking receipient address verification at the accept-email-for-sending stage. How can I disable that, so that sendmail doesn't block my UI threads? Update 2: This only seems to happen at busy times. Perhaps I am running out of sendmail threads or something? How can I check that?

Read the article

FTP Server upload and filesystem questions

- by Alex

I'm a photographer who mainly does event photography. A while ago I bought myself a Nikon WT-4 wireless transmitter, a small device which connects via USB to my Nikon D700 DSLR, and then establishes a WiFi connection to an existing WLAN. It can then upload any pictures I take via FTP to an FTP server somewhere in the network. On my laptop I then have a piece of software which will check a given folder on the disk regularly, this software is smart enough to look at the modified file timestamp, if this timestamp is less than 10 seconds ago, it will not attempt to import the folder and skip the file in this iteration of the import scan. The problem I've discovered seems to be inherent to the FTP protocol, as I have the same problem with Windows 7 built in IIS server, as I do with FileZilla FTP server. When the transmitter starts to upload a file, the FTP server will create a small 300-500 KB file with the correct filename on the disk, but then do nothing with the file until it has completely received the file via FTP. So it seems to create this small dummy file, and then buffer the remainder of the FTP upload until it's finished, and then dump the rest of the file into the dummy file making it the correct size. Problem is, these uploads take about 15-30 seconds depending on reception, but since the folder watch tool will already try to import any file older than 10 seconds, it will always try to import the small dummy files which obviously fails as they're not copmlete yet. Is there any way to 'disable' this behaviour? Ideally I would like my file only to show up once it's been completely uploaded. Or perhaps someone knows another FTP server application (it has to run on win7) which does not show this behaviour?

Read the article

Linux Centos 6 becomes unavailable from time to time - OS&network issue

- by adoado0

I am encountering following problem. There is one server (DL160 G5) running Centos 6.3 with default kernel 2.6.32-220.2.1.el6.x86_64 - at this point I'd like to add that issue appeared also at older version - 6.1 and older kernel (do not remember exactly which version). There is cPanel installed and from time to time it becomes unavailable (network connection). What I've checked is (via KVMoIP): load average is completely normal it does not lack memory or disk space when problem occurs no console notifications checked all access logs and there is no sign that it can be caused by a client script cannot even access local interface (127.0.0.1) or main IP address running tcpdump I can only see packets arriving to server - no responses all services seem to be running properly (mail,sql,http,ssh) checked crontab and all clients' crontabs too network port utilisation is low ( up to several Mbits) arriving packet rate is low - hundreds per second (according to tcpdump) console (via kvmoip) works fine, no lags there is no conntrack at this server there is no ipv6 at this server flushing iptables, unloading modules does not resolve problem restarting network does not resolve problem, no errors appear it also occurs when two sepearate networks are configured (and multiple gateways) as well as one IP, one default gw and one network is configured - so it seems network configuration independent it seems to repeat randomly (load,packet rate,bandwith usage,load independent) checked server with different rootkit detection tools - it seems to be clean server has been rebooted, it did not change anything there are no interface errors it apperas randomly can be once a week or several times per day It usually works fine after 1-15 minutes. What I can also check? It is definitely OS issue - there is traffic at interface only in one direction when problem occurs, can not even ping loopback. Any ideas? Recommended checks? Anything I did not checked above.

Read the article

Why does windows (file) explorer try to connect to port 80 (http) instead just using smb?

- by Erik

Background: On an almost freshly installed pc I get a message along the lines of : "windows cannot find some-file-server-name. Check the spelling and try again"... when trying to access any fileshare. Troubleshooting so far: pinging works. Both by ip and by name the almost identical pc next to this one can access the file server everyone else can access the file server the pc in question can not access other open fileshares but it can connect to the internet And now for what I think is the interesting part: running wireshark with ip.addr == local.ip.add.ress and ip.addr == server.ip.add.ress tells me that it tries to connect over http. the server replies but after a few messages back and forth it stops the other machine of course just uses smb I guess port 80 just means it defaults to webdav, but I haven't been able to find anything that can cause this. Googling it the closest thing I found was this http://www.techrepublic.com/article/get-vista-and-samba-to-work/6353849 but then again this was an XP pc and I wasn't able to connect to other native Windows shares (and I tried the solution anyway and it didn't work.)

Read the article

Windows XP - Power surge on hub port

- by Swift-Tuttle

Hi, Since last few weeks I constantly get this error, as status bar balloon: Power Surge on Hub Port - A USB device has exceeded the power limits of its hub port. Due to this now I am unable to access any USB devices properly, they get disconnected intermittently. I did quite a few things to resolve this problem, firstly obviously through the Windows help. I even tried all the things told on the Microsoft website(which essentially says is to check and update the driver) but in vain. One suggestion, I found when I google'd was to disable the USB2 controller through the Device Manager and since at every startup the System configuration comes up complaining that it has been changed etc.(On that same site it is mentioned to ignore this message.) But after everything I still cant solve this problem. Any help is much appreciated. The system is installed with Windows XP service Pack 3 and all the updates till last month. Please let me know if any other hardware info is required. **UPDATE** My laptop is about 5 years old now, its an HP with Celeron 1.4G processor. Windows XP SP3 installed. All latest windows updates installed. 2 USB ports available. BIOS is HP 68DTD ver F.0A Do I need to update my BIOS from somewhere ? or is this a hardware problem altogether?

Read the article

My laptop screen keeps dimming

- by Rowland

I have a Cryo laptop with Windows 7 installed, bought in December 2011. Sometimes the screen seems to persistently dim and/or brighten up, even as I am doing things. In fact the brightness is varying even as I type this. The battery is always fully charged and connected to the mains. I have checked many times the battery/power-saving settings always leaving the settings the same way; full brightness and never dimming when on the mains. Yet when the screen starts playing up I can end up with the screen dimming and brightening almost continuously. I once went to the "adjust screen brightness" window when the screen had dimmed. I found the brightness slider on 100% (as I expected) but, as I dragged it to the left, to dim the screen, it first brightened and then started dimming, i.e. the screen setting said 100% brightness but it was only at, maybe 80%. I have checked with Cryo and they just say check the power settings. I know what these are and how to work them and always set them to never dim/full brightness, yet still my laptop starts this dimming every so often.

Read the article

Eclipse CDT wont recognize standard library

- by Mike G

I work primarily on my desktop, but I started working on my mac laptop and noticed a problem with eclipse CDT. The standard library was underlined yellow and cout wouldn't work (It wouldn't recognize/find it). I tried restarting the program and that didn't work. I then tried to see if xcode would work, found that the version of xcode was too old, and updated xcode. Eclipse still didn't work, but xcode did. I tried re-installing eclipse to the new version and re-installing cdt. It still wouldn't work. Restarting my computer wont work either. I'm not sure if this helps (or even matters/applies) but when I type g++ --version into terminal, it doesn't work. (I don't know if that matters but some tutorial told me to do that to check if the compiler was working). So, in review, I have: Re-installed eclipse Restarted my computer Re-installed xcode (which I think has all the compilers eclipse uses.) Updated Eclipse Typed g++ --version to test compiler.

Read the article

mail server checklist..

- by Jeff

currently we ran into some issues with our mail server setup. im preparing a list of actions that we should enforce and use in order to maintain a proper email solution within our company. we have around 80 exchange users, and send mass emails out almost on a monthly bases to 20,000 + customers each time.. the checklist i currently have: 1) mcafee mxlogic 'cloud' anti-spam functionality for incoming message. 2) antivirus on each computer in company 3) antivirus on exchange and DNS servers 4) setup SPF record 5) setup DKIM 6) setup domainkey 7) setup senderID 8) submit spf to microsoft, yahoo, etc. for 'whitelist' purposes. 9) configure size limits for messages in exchange to safe numbers 10) i have 2 outside IPs for my email server, incase one gets blacklisted, switch to the backup. 11) my internet site rests on a different ip than the mail server 12) all mass emails for company sent through 3rd party company (listtrak.com) 13) setup domain alias, media, enews, and bounce for the 3rd party mass mail software. 14) verify the setup using [email protected] 15) configure group policy and our opendns.org account to prevent unwanted actions and website viewing mass emails: 1) schedule them to send different amounts at different times (1,000 at 10am, 1,000 at 4pm, 1,000 10am next day).. 2) setup user prefences, decide what they want to receive ect. ( there interests) 3) send a more steady flow of email, maybe 100 a week with top new products instead of 20,000k every other month.. if anyone has suggestions or additions/subtractions to this checklist they are greatly appreciated. thank you

Read the article

Mysql Query - That Is Returning Blatanty Incorrect Result

- by user866190

I am building a VPS node that is running Ubuntu 10.10LTS, Apache2, Mysql 5.1 and php5. I could not log in to my website admin through the browser, even though I am using the correct login details. So I logged in from the command line to check the results. When I run this query I get expected results: mysql> select * from users; +----+----------+-----------------------+----------+ | id | username | email | password | +----+----------+-----------------------+----------+ | 1 | myUserName | [email protected] | myPassword | +----+----------+-----------------------+----------+ And the same goes for this query: mysql> select * from users where id = 1; +----+----------+-----------------------+----------+ | id | username | email | password | +----+----------+-----------------------+----------+ | 1 | myUserName | [email protected] | myPassword | +----+----------+-----------------------+----------+ 1 row in set (0.00 sec) But when I run this query I get this 'unexpected response': mysql> select * from users where username = 'myUserName' and password = 'myPassword'; Empty set (0.00 sec) I am not sure why this is happening. Any help would be greatly appreciated. BTW.. I will be encrypting the user details but for now I just want to get it set up. Please help, Thanks

Read the article

Website always having DNS problems

- by Root

I moved my website from shared hosting to VPS. When it was in shared hosting all I did is updated my name servers whereas now I got my own VPS server and I used one of my domain sjdpublishing.com as the primary domain for my VPS. I created nameservers as ns1.sjdpublishing.com and ns2.sjdpublishing.com and then my actual website is creativeproperty.com.au which are pointing to ns1.sjdpublishing.com and ns2.sjdpublishing.com I am having repeated problems with my domain creativeproperty.com.au a few weeks back I had a problem which was resolved by flushing DNS and later I got similar problem which was not resolved by flushing DNS, I posted a question here and someone answered me to go to Network Settings in my MAC OSX and remove the IP as in my MAC terminal nslookup creativeproperty.com.au points to my router IP and I fixed this problem Now many of my clients were complaining that they are having same troubles accessing my website. I don't know whether its to flush DNS or change network settings or other issues. Can anyone please check my domain creativeproperty.com.au and sjdpublishing.com are having correct records or not and also can anyone tell me the best solution for this issue?

Read the article

Should I buy more RAM for my computer or a better CPU?

- by Reijer The Coder

I have recently bought a new laptop, an ASUS N56VJ-S4149H. I bought it to use it in all possible ways I could want, so that would be gaming downloading and streaming movies browsing the web and programming software. So far it has been running great but one thing annoys me a little bit. I frequently play Mount&Blade: Warband, it's a great game and you should check it out. Everything runs smoothly but only when I turn down the 'Texture Detail'. Otherwise it will lag a lot and I can't really play. Now my question is: Is this a problem of not enough RAM? At first I was really sure it was but after thinking about for a while I'm not anymore. My computer only has 4 Gigabytes of RAM and there is still a slot open. So will it improve when I buy another 8 Gigabytes? EDIT: It has an Nvidia GeForce GT 635M inside. and an Intel Core i5 3230M CPU with 2,6 GHz. Help and answers are really appreciated. Thanks to all.

Read the article

Multi-partition USB stick

- by nightcracker

In my freelance job as "the dude that fixes your computer" I have an extremely handy tool, a bootable USB stick with Ubuntu LiveCD that allows me to recover and investigate in a known, working environment. Now, I want to reformat this USB stick and reinstall with Casper-RW persistance. I did this a few times before with a FAT-formatted USB stick. It was a horror. The USB drive corrupted constantly, by people accidently removing the USB stick, the computer not properly shutting down, ETC. Now what I want to create a multi-partition USB stick so I can put Ubuntu on a ext partition, but still be able to store some Windows stuff in it, by having a secondary FAT partition. However I read somewhere that Windows will only check the first partition on USB sticks, giving a problem with the first bootable linux partition. Is this possible on some way? EDIT Perhaps it wasn't clear what the problem is. The problem is that I read somewhere that Windows will only recognize the first partition on a USB stick. But I want two partitions, a ext partition and a FAT partition. No issues so far, but in order to be bootable the ext partition must be the first one!

Read the article

Apache Proxy Error AH00920 and AH01206

- by Aptos

I ran into this problem when trying to enable proxy function on apache http: My httpd.conf LoadModule proxy_module modules/mod_proxy.so LoadModule proxy_connect_module modules/mod_proxy_connect.so LoadModule proxy_ftp_module modules/mod_proxy_ftp.so LoadModule proxy_http_module modules/mod_proxy_http.so LoadModule proxy_fcgi_module modules/mod_proxy_fcgi.so LoadModule proxy_scgi_module modules/mod_proxy_scgi.so LoadModule proxy_ajp_module modules/mod_proxy_ajp.so LoadModule proxy_balancer_module modules/mod_proxy_balancer.so <VirtualHost localhost:57173> ServerName localhost <Location /balancer-manager> SetHandler balancer-manager Order Deny,Allow Deny from all Allow from localhost </Location> <Proxy balancer://mycluster> BalancerMember http://localhost:9999 BalancerMember http://localhost:9998 status=+H </Proxy> <Proxy *> Order Allow,Deny Allow From All </Proxy> ProxyPreserveHost On ProxyPass /balancer-manager ! ProxyPass / balancer://mycluster/ ProxyPassReverse / http://localhost:9999/ ProxyPassReverse / http://localhost:9998/ </VirtualHost> When I check the log: [Sat Oct 27 00:16:24.506220 2012] [proxy:crit] [pid 3153] (13)Permission denied: AH00920: Failed to reopen mutex balancer://mycluster in child [Sat Oct 27 00:16:24.506407 2012] [proxy_balancer:crit] [pid 3152] (13)Permission denied: AH01206: Failed to init balancer balancer://mycluster in child Can someone please help me :( I tri googling it but there was no answer for this problem. Thank you very much

Read the article

lighttpd domains and url matching

- by Manuel

I'm trying to configure lighttpd so that: www.domain1.org/admin uses config1 any other URL on www.domain1.org uses config2 any url on www.domain2.org uses config2 So basically, domain1 and domain2 should use the same configuration except for when domain1 is accessed via an URL that starts with /admin I tried so far a number of variations, including this one: $HTTP["host"] =~ "domain1.org" { $HTTP["url"] =~ "^/admin" { // config1 alias.url = ("/media/admin" => "/usr/share...", "/static" => "/var/www/...") url.rewrite-once = ( "^(/media/admin.*)$" => "$1", "^(/static.*)$" => "$1", "^/favicon\.ico$" => "/media/favicon.ico", "^(/.*)$" => "/application.fcgi$1", ) server.document-root="/var/www/application" fastcgi.debug = 1 fastcgi.server = ( "/application.fcgi" => ( "main" => ( "socket" => "/var/www/application/application.sock", "check-local" => "disable", ) ), ) } else $HTTP["url"] !~ "^/admin" { // config2 } $HTTP["host"] !~ "domain1.org" { // config2 } But no matter what, accessing domain1.org/admin yields a 404. Is there anything that I am missing?

Read the article

Linux: How do I use Munin in cPanel to monitor MySQL?

- by Continuation

I have a cPanel server running CentOS 5.5. I want to use Munin to monitor MySQL. I went to: Main >> cPanel >> Manage Plugins and selected "Install and keep updated" for Munin and clicked "Save". I got the usual bunch of status updates about the install. At the end I got: Going to read '/home/.cpan/sources/modules/02packages.details.txt.gz' Database was generated on Wed, 02 Mar 2011 18:28:33 GMT ..........................................................................DONE Going to read '/home/.cpan/sources/modules/03modlist.data.gz' Out of memory! Callback called exit. Done Done Done Process Complete As you can see I got an "Out of memory!" message. But after that it said "Process Complete". Was Munin installed? When I went back to "Manage Plugins" it Munin has a check that against "Install and keep updated". So is everything alright? And how do I use Munin now? How do i configure it to monitor MySQL? Where can I see the results? Thanks.

Read the article

Windows Server 2008 R2 creating a multi-year client certificate using the IIS certsrv page while deploying SSTP VPN

- by Warren P

I am trying to follow instructions on Technet about deploying a Standard (non-enterprise) SSTP based VPN) that were originally written for Server 2008, but I am using Server 2008 R2, I have gotten as far as the part where it asks you to create a request a Server Authentication certificate. I have deployed IIS, and Active Directory Certificate Services, and chose "Standalone" and "Standard" (non-enterprise) Certificate Authority because I don't have an OID and don't think I should have to get one for a simple deployment of SSTP. The resulting certificates made by the Certification Authority "Issue" command, only have a 1 year period of validity, I want a multi-year certificate. At no point in this process is there any way to input this information unless it's through the Attributes text input area on the Advance Certificate Request page, which appears to be generated using an old ActiveX control, which means I can only do this using the workarounds in the article that I linked at the top, and only using Internet Explorer. Update:: It may be that this question is pointless since self-signed keys do not appear to work, when I try them, using Windows 8 as the VPN client. The problem is that the keys that are self-created by the technique shown here do not have any Certificate Revocation Server URLs and so you get an error "The revocation function was unable to check revocation", and the VPN connection fails.

Search Results

Search found 21097 results on 844 pages for 'check snmp'.

Page 644/844 | < Previous Page | 640 641 642 643 644 645 646 647 648 649 650 651 | Next Page >

- by UpTheCreek

- by James

- by pedalpete

- by Aviator

- by JonathanLIVE

- by Antonio Bakula

- by user60129

- by George

- by Xeoncross

- by Rich

- by Alex

- by adoado0

- by Erik

- by Swift-Tuttle

- by Rowland

- by Mike G

- by Jeff

- by user866190

- by Root

- by Reijer The Coder

- by nightcracker

- by Aptos

- by Manuel

- by Continuation

- by Warren P

< Previous Page | 640 641 642 643 644 645 646 647 648 649 650 651 | Next Page >