Search Results

Search found 15558 results on 623 pages for 'basic authentication'.

Page 65/623 | < Previous Page | 61 62 63 64 65 66 67 68 69 70 71 72  | Next Page >

• Vista home basic, "this folder is empty" problem

  - by peter m

  When I access my itunes folder in "my music" I see most but not all artist folders, when I access any of them I get "this folder is empty", When in Itunes all music plays and if I right click on a song and click show in folder I can see my full Itunes folder, so far I have done two system restores, scan disk, windows memory scan, defrag and tried ifixit. nothing has worked, I dont understand how I can see two different folders at the same address. Also have checked hidden files settings.

  Read the article

• Basic IP address structure

  - by dannymcc

  We currently have a few servers, around 30-40 workstations and 16 phones. Each device has a static IP address. As an example the standard settings for a new workstation is; IP: 192.168.1.XXX Subnet: 255.255.255.0 Gateway: 192.168.1.99 DNS: 192.168.1.50 As I am slowly exploring new server OS's and virtualisation etc. I am getting close to wanting a wider range of IP addresses. What I would like to do is seperate the devices by IP as follows: Servers 192.168.1.XXX Workstations 192.168.2.XXX Printers 192.168.3.XXX Phones 192.168.4.XXX VM's 192.168.5.XXX Is this a bad idea, or is this a common way of doing things? My biggest concern is the phones and subnet masks. The phones are managed by our provider although I have access to the server that runs them. Would I need to change the subnet mask to 255.255.0.0 on all devices? Or only those that change? For example, the phones don't need to connect to any other devices other than other phones and the phone server. So if I have the phones on 192.168.1.XXX with a subnet mask of 255.255.255.0 and then moved everything I had complete ownership/control of to 192.168.X.XXX with a new subnet mask of 255.255.0.0. Would that work?

  Read the article

• Basic networking problem with Ubuntu 9.04 on Acer Extensa 5635Z laptop

  - by sapporo

  I just installed Ubuntu 9.04 on a brand new Acer Extensa 5635Z laptop, but ethernet networking does't work (wireless doesn't work either, but I'd be happy with ethernet for now). eth0 isn't listed in /etc/network/interfaces: $ cat /etc/network/interfaces auto lo iface lo inet loopback lshw does show the nic, but I can't make much sense out of the information: $ sudo lshw -class network -sanitize *-network DISABLED description: Wireless interface product: AR928X Wireless Network Adapter (PCI-Express) vendor: Atheros Communications Inc. physical id: 0 bus info: pci@0000:07:00.0 logical name: wmaster0 version: 01 serial: [REMOVED] width: 64 bits clock: 33MHz capabilities: pm msi pciexpress msix bus_master cap_list logical ethernet physical wireless configuration: broadcast=yes driver=ath9k latency=0 module=ath9k multicast=yes wireless=IEEE 802.11bgn *-network UNCLAIMED description: Ethernet controller product: Attansic Technology Corp. vendor: Attansic Technology Corp. physical id: 0 bus info: pci@0000:09:00.0 version: c0 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress vpd cap_list configuration: latency=0 *-network DISABLED description: Ethernet interface physical id: 1 logical name: pan0 serial: [REMOVED] capabilities: ethernet physical configuration: broadcast=yes driver=bridge driverversion=2.3 firmware=N/A link=yes multicast=yes Thanks for your help!

  Read the article

• Completely reset mysql server authentication

  - by p3dro-sola

  I was trying to change the password for a user on a mysql server, and i appear to have locked myself out. I have access to the root user, but root doesn't have the privileges to access any databses, including the 'mysql' database where all the config is kept. Is there any way i can 'reset' the root user? (i have full file-system access) ... or do i just need to reinstall (can i salvage my data?) Thanks. -Ped

  Read the article

• Smart card authentication to a Cisco switch?

  - by murisonc

  We have our Cisco network devices configured to authenticate network administrators using their domain accounts via RADIUS running on a Windows 2008R2 server with the network protection role. This works great for logging into the switch via SSH when configuring the devices. We are now in the beginning stages of deploying smart cards for logins. Does anyone know of a way to login to a Cisco switch using a smart card instead of a domain username and password? The SSH client we are using is Putty. Workstations are Windows 7. RADIUS is running on Windows 2008R2. We are running our own certificate authority on Windows 2008; network is not connected to the Internet. We prefer to not have to purchase additional proprietary devices for this functionality.

  Read the article

• BlueCoat reverse proxy NTLM authentication

  - by mathieu

  Currently when we want to access an internal site from Internet (IIS with NTLM auth), we have two login screens that appear : step1 : LDAPAuth, from the BlueCoat that check login/password validity against Active Directory step2 : NTLM auth, from our application. Is it possible to configure the reverse proxy to use the LDAP credentials provided at step1, and give them to whatever application that requests them ? Of course, if those credentials aren't valid, nothing happens. We're using BlueCoat SG400. Update : we're not looking for SSO where the user doesn't have to enter a password. We want the user to enter his domain credentials in the LDAPAuth dialog box, and the proxy to reuse it to authenticate against our application. Or any application that uses NTLM. We've only got 1 AD domain behind the reverse proxy.

  Read the article

• Signup with email authentication, only 30% are activated?

  - by mysqllearner

  I have a website which let users to sign up. The signup process including sending "activation email", click link to activate account. The first two weeks was fine. Out of around 2000 users, 1800 users are activated. After that, the activated users drop drastically, to about 30%. Example: 1000 users signup, only 300 were activated. At first, I found the problem is because the email could not be reach to ymail, msn and gmail users. (Most of my subscribers are Ymail (yahoo), hotmail/msn(live) and gmail (gmail)). I tried signup using ymail and hotmail, but i didnt get any activation email. I contacted yahoo and msn, eventually my email can go through now. However, my signup statistic still showing, the activated users are only about 30%, which very confuse me. I contact my hosting company, ask them the whitelist my IP. And they did it. I need your advice/help on following questions: How to check where the problem lies? Is the email not delivered? User receive email but didnt click the activation link? I am using php mail funstion. and this is my headers: $headers = 'MIME-Version: 1.0' . "\r\n"; $headers .= 'Content-type: text/html; charset=UTF-8' . "\r\n"; $headers .= 'From: Admin <[email protected]>' . "\r\n"; $headers .= 'Return-Receipt-To: Bounce <[email protected]>' . "\r\n"; $headers .= 'Reply-To: Admin <[email protected]>' . "\r\n"; $return_path = "[email protected]"; Is there anything wrong with the headers? What can I do to improve my registration/signup activation process?

  Read the article

• Basic video editor for AVCHD Lite files?

  - by davr

  I have a camera (Panasonic Lumix GF-1) that outputs "AVCHD Lite" files, 720p h264 in a MTS container. I saw this question that said Movie Maker in Windows 7 supports AVCHD...but I just tried, and unfortunately it does not support AVCHD Lite. Are there any free or inexpensive non-linear video editors (NLE) that can natively handle AVCHD Lite files, without requiring some 3rd party driver? If not, are there any 3rd party drivers that are especially stable? (In my experience they usually have some problems...I got AVCHD Lite loading into VirtualDub using a 3rd party plugin, but it's very slow and sometimes crashes, and seeking takes ages.

  Read the article

• activesync not working with forms based authentication

  - by Chad

  I have an Exchange 2003 SP2 single backend server with an SSL cert. I was having trouble getting OMA to work so I found a MS article about making a reg hack and creating a new Exchange-OMA virtual directory. I am able to connect and access content from my mailbox by using secure mail.domainname.com/oma and using my credentials. ActiveSync was not working on a Windows mobile phone or iPhone. I found another article about using Forms Based Authenication and SSL on a single Exchange server environment and the fix was to elliminate FBA and SSL for the Exchange virtual directory. That allows ActiveSync to now work. I have very few mobile users, but they are management, so I need to make ActiveSync work but I would like to get back to using SSL. http://support.microsoft.com/kb/817379 Any ideas about this setup? Thanks.

  Read the article

• Problem with authentication of users via IE when using "host header value"

  - by Richard

  Hi, I'm trying to set multiple web sites up in an IIS 6. I've got a working virtual site residing under the default web site, but if I create a new web site in the IIS and asign it a host header value, let it point to the very same file structure as in the prevoiusly mentioned site and finally asign windows integrated security only to the site - I still cannot log in to the new site using MSIE 6 or 8 but FF 3.5 works fine. In the web log I get these entries if I access the localhost site 2009-11-19 09:15:59 W3SVC1 127.0.0.1 GET /client/ - 80 - 127.0.0.1 Mozilla/4.0+(compatible;+MSIE+8.0;+Windows+NT+5.2;+Trident/4.0;+.NET+CLR+2.0.50727) 401 2 2148074254 2009-11-19 09:15:59 W3SVC1 127.0.0.1 GET /client/ - 80 - 127.0.0.1 Mozilla/4.0+(compatible;+MSIE+8.0;+Windows+NT+5.2;+Trident/4.0;+.NET+CLR+2.0.50727) 401 1 0 2009-11-19 09:15:59 W3SVC1 127.0.0.1 GET /client/Default.asp - 80 xxx\Administrator 127.0.0.1 Mozilla/4.0+(compatible;+MSIE+8.0;+Windows+NT+5.2;+Trident/4.0;+.NET+CLR+2.0.50727) 200 0 0 If I however access via the host headre value site I get prompted to login but the login fail and I also get an error "401 1 2148074252" which not present when it succeeds. Can this be the issue? Pre login screen 2009-11-19 09:15:59 W3SVC1793297778 127.0.0.1 GET / - 80 - 127.0.0.1 Mozilla/4.0+(compatible;+MSIE+7.0;+Windows+NT+5.2;+Trident/4.0;+.NET+CLR+2.0.50727) 401 2 2148074254 2009-11-19 09:15:59 W3SVC1793297778 127.0.0.1 GET / - 80 - 127.0.0.1 Mozilla/4.0+(compatible;+MSIE+7.0;+Windows+NT+5.2;+Trident/4.0;+.NET+CLR+2.0.50727) 401 1 2148074252 2009-11-19 09:15:59 W3SVC1793297778 127.0.0.1 GET / - 80 - 127.0.0.1 Mozilla/4.0+(compatible;+MSIE+7.0;+Windows+NT+5.2;+Trident/4.0;+.NET+CLR+2.0.50727) 401 1 0 post login screen (note that win credentials have not been submitted) 2009-11-19 09:15:59 W3SVC1793297778 127.0.0.1 GET / - 80 - 127.0.0.1 Mozilla/4.0+(compatible;+MSIE+7.0;+Windows+NT+5.2;+Trident/4.0;+.NET+CLR+2.0.50727) 401 1 0 2009-11-19 09:15:59 W3SVC1793297778 127.0.0.1 GET / - 80 - 127.0.0.1 Mozilla/4.0+(compatible;+MSIE+7.0;+Windows+NT+5.2;+Trident/4.0;+.NET+CLR+2.0.50727) 401 1 2148074252 Firefox will try to access using anonymous access and will prompt for login, after submitting win credentials it all works fine. For what reasoon is the IE so stubornly refusing to submit credentials to the "host header value" site? The site is in the Local intranet Zone and login is ticked for that zone. No teaming NIC's no FW, no nothing, I'm cluless :( /Richard

  Read the article

• Nginx Server with Ruby on Rails application SMTP Authentication Error

  - by Spoons

  I'm developing a Rails app which when I run it locally, it's able to send emails through a gmail account via smtp. When I moved it to my sever (running Nginx), it comes up with the following error for example when I try to create a new user. Net::SMTPAuthenticationError in UsersController#create 535-5.7.1 Username and Password not accepted. The nginx.conf file remains the same from when I set it up.

  Read the article

• LDAP Authentication woes

  - by Marcelo de Moraes Serpa

  Hello list, I have a local OpenLDAP server with a couple of users. I'm using it for development purposes, here's the ldif: #Top level - the organization dn: dc=site, dc=com dc: site description: My Organization objectClass: dcObject objectClass: organization o: Organization #Top level - manager dn: cn=Manager, dc=site, dc=com objectClass: organizationalRole cn: Manager #Second level - organizational units dn: ou=people, dc=site, dc=com ou: people description: All people in the organization objectClass: organizationalunit dn: ou=groups, dc=site, dc=com ou: groups description: All groups in the organization objectClass: organizationalunit #Third level - people dn: uid=celoserpa, ou=people, dc=site, dc=com objectclass: pilotPerson objectclass: uidObject uid: celoserpa cn: Marcelo de Moraes Serpa sn: de Moraes Serpa userPassword: secret_12345 mail: [email protected] So far, so good. I can bind with "cn=Manager,dc=site,dc=com" and the 12345678 password (the local server password, setup on slapd.conf). However, I would like to bind with any user in under the people OU. In this case, I'd like to bind with: dn: uid=celoserpa, ou=people, dc=site, dc=com userPassword: secret_12345 But I'm getting a "(49) - Invalid Credentials" error everytime. I have tried through CLI tools (such as ldapadd, ldapwhoami, etc) and also ruby/ldap. The bind with these credentials fails with a invalid credentials error. I thought that it could be an ACL issue, however, the ACLs on slapd.conf seem to be right: access to attrs=userPassword by self write by dn.sub="ou=people,dc=site,dc=com" read by anonymous auth access to * by * read I was suspecting that maybe OpenLDAP doesn't compare against userPassword? Or maybe some ACL configuration I am missing that is somehow affecting the read access to userPassword for the specific DN. I'm really lost here, any suggestion appreciated! Cheers, Marcelo.

  Read the article

• DNS entries for OCS 2007 R2 basic deploy

  - by Anero

  I'm doing a test deploy on a Lab with 3 VMs: TEST-DC: DC / DHCP / DNS / Root CA (Joined to TEST.AD Domain) TEST-CS: OCS Front End (Joined to TEST.AD Domain - IP: 10.0.128.1) TEST-EDGES: OCS Edge Server (Joined to Workgroup: EDGE-WKG - Internal IP: 10.0.128.3, External IPs: 192.168.129.12 - Access Edge Server, 192.168.129.13 - Web Conferencing, 192.168.129.14 - A/V) I can login with the Communicator Client from within computers in the domain (using [email protected]) and even the Automatic Sign-In works as expected. Nevertheless, I cannot login neither from within machines in the domain nor from outside the domain using [email protected]. I'm pretty sure it is a DNS related issue, so I'm including below a list of the entries. DNS Entries on TEST-DC: Forward Lookup Zones TEST.AD sip.test.ad (Host A). IP Address: 10.0.128.1 sipinternal.test.ad (Host A). IP Address: 10.0.128.1 sipexternal.test.ad (Host A). IP Address: 10.0.128.3 _sipinternaltls._tcp.test.ad (Service Location SRV). Port: 5061. Host: sipinternal.test.ad _sipinternal._tcp.test.ad (Service Location SRV). Port: 5061. Host: sipinternal.test.ad _sip._tcp.test.ad (Service Location SRV). Port: 5061. Host: sipexternal.test.ad _sipfederationtls._tcp.test.ad (Service Location SRV). Port: 5061. Host: sipexternal.test.ad _sip._tls.test.ad (Service Location SRV). Port: 443. Host: sipexternal.test.ad TEST.COM sip.test.com (Host A). IP Address: 10.0.128.1 sipinternal.test.com (Host A). IP Address: 10.0.128.1 sipexternal.test.com (Host A). IP Address: 10.0.128.3 _sipinternaltls._tcp.test.com (Service Location SRV). Port: 5061. Host: sipinternal.test.com _sipinternal._tcp.test.com (Service Location SRV). Port: 5061. Host: sipinternal.test.com _sip._tcp.test.com (Service Location SRV). Port: 5061. Host: sipexternal.test.com _sip._tls.test.ad (Service Location SRV). Port: 443. Host: sipexternal.test.ad Validation Errors OCS Front End Edge Server I ran the OCS 2007 Automatic Sign-In Troubleshooting and all DNS entries for both TEST.AD and TEST.COM are reported to be OK. What am I missing?

  Read the article

• BlueCoat reverse proxy NTLM authentication

  - by mathieu

  Currently when we want to access an internal site from Internet (IIS with NTLM auth), we have two login screens that appear : step1 : LDAPAuth, from the BlueCoat that check login/password validity against Active Directory step2 : NTLM auth, from our application. Is it possible to configure the reverse proxy to use the LDAP credentials provided at step1, and give them to whatever application that requests them ? Of course, if those credentials aren't valid, nothing happens. We're using BlueCoat SG400. Update : we're not looking for SSO where the user doesn't have to enter a password. We want the user to enter his domain credentials in the LDAPAuth dialog box, and the proxy to reuse it to authenticate against our application. Or any application that uses NTLM. We've only got 1 AD domain behind the reverse proxy.

  Read the article

• WEP authentication suddenly failing in Ubuntu

  - by kellishaver

  I'm running Ubuntu 9.10 and after a recent reboot, I'm now unable to authenticate to wireless networks using WEP encryption. I can connect fine to open networks (no idea about WPA). When trying to connect via WEP, I'm continually prompted for the network key, which I know I have entered correctly (and should have been/is saved in my keyring anyway). Everything had been working fine until the reboot. No updates had been installed or configuration changes made. Hardware-wise, everything looks fine (http://pastebin.org/113777), and the fact that connecting to an open network works just fine leads me to think this is a software issue. I just don't know where to begin fixing it. Any insights would be greatly appreciated.

  Read the article

• Basic OpenVPN setup

  - by WalterJ89

  I am attempting to connect 2 win7 (x64+ x32) computers (there will be 4 in total) using OpenVPN. Right now they are on the same network but the intention is to be able to access the client remotely regardless of its location. The Problem I am having is I am unable to ping or tracert between the two computers. They seem to be on different subnets even though I have the mask set to 255.255.255.0. The server ends up as 10.8.0.1 255.255.255.252 and the client 10.8.0.6 255.255.255.252. And a third ends up as 10.8.0.10. I don't know if this a Windows 7 problem or something I have wrong in my config. Its a very simple set up, I'm not connecting two LANs. this is the server config (removed all the extra lines because it was too ugly) port 1194 proto udp dev tun ca keys/ca.crt cert keys/server.crt key keys/server.key # This file should be kept secret dh keys/dh1024.pem server 10.8.0.0 255.255.255.0 ifconfig-pool-persist ipp.txt client-to-client duplicate-cn keepalive 10 120 comp-lzo persist-key persist-tun status openvpn-status.log verb 6 this is the client config client dev tun proto udp remote thisdomainis.random.com 1194 resolv-retry infinite nobind persist-key persist-tun ca keys/ca.crt cert keys/client.crt key keys/client.key ns-cert-type server comp-lzo verb 6 Is there anything I missed in this? keys are all correct and the vpn's connect fine, its just the subnet or route issue. Thank You

  Read the article

• Basic Exchange Deployment Question

  - by charnley

  I have come into a situation where I need to deploy a new Exchange server at a small company. I haven't dealt with the newest version of Exchange (2010) yet, but am familiar with 2003 and 2007. The site is currently running one Exchange 2003 server, which hosts about 100 mailboxes. We have new hardware for an additional server, and this is where I need some advice. Should I install Exchange 2010 on the new hardware and leave the older server as-is? Do I upgrade the old server and use it as a bridgehead or replication partner (there is nothing wrong with it other than it is a few years old and running Win2003/Exchange2003)? Can I leave the older 2003 server alone with only the POP mailboxes on it, and will it peacefully co-exist with the new server? Any advice is very appreciated!

  Read the article

• Dual boot Windows 7 with Windows 8- Dynamic Disk

  - by MeetM

  Its a long explanation. I have a HP Pavilion dm4 notebook. It has pre installed Windows 7 Home Pre. Recently, I tried to install Windows 8 developer preview on my notebook, but while installing, it only allowed me to insatll it on my primary Windows 7 drive I.e. drive C. I had kept 1 empty partition for Windows 8 but when I selectced that option, the next button at the bottom of the window just grey with some error saying Windows cannot boot from this drive....blah blah blah So I googled and found another way of doing it by VHD(virtual hard disk). This seemed to work but on restarting gave me "VHD_BOOT_INITIALIZATION_FAILED" error. After trying all possible ways for around 10 times, I gave up. I noticed that d only thing difference in d tutorials and my notebook is the Disk type. They all had Basic and I have Dynamic. Is that the reason m not able to boot Windows 8? Any suggestions?

  Read the article

• nconf deployment.ini configuration for a basic Nagios server on CentOS 6.2

  - by jshin47

  I have set up nconf and Nagios but I cannot figure out how to configure deployment.ini to properly deploy the generated configuration to /usr/local/nagios/etc. Here are the directory listings of interest: [jshin@nag0 tmp]$ ls Default_collector global [jshin@nag0 tmp]$ cd Default_collector/ [jshin@nag0 Default_collector]$ ls advanced_services.cfg hostgroups.cfg service_dependencies.cfg services.cfg host_dependencies.cfg hosts.cfg servicegroups.cfg [jshin@nag0 Default_collector]$ cd .. [jshin@nag0 tmp]$ cd global/ [jshin@nag0 global]$ ls checkcommands.cfg contacts.cfg misccommands.cfg timeperiods.cfg contactgroups.cfg host_templates.cfg service_templates.cfg [jshin@nag0 global]$ cd .. [jshin@nag0 tmp]$ cd /usr/local/nagios/etc/ [jshin@nag0 etc]$ ls cgi.cfg htpasswd.users nagios.cfg objects resource.cfg [jshin@nag0 etc]$ cd objects/ [jshin@nag0 objects]$ ls commands.cfg localhost.cfg switch.cfg timeperiods.cfg contacts.cfg printer.cfg templates.cfg windows.cfg Here is my deployment.ini (pretty much the default setting) ;; LOCAL deployment ;; [extract config] type = local source_file = "/var/www/html/nconf/output/NagiosConfig.tgz" target_file = "/tmp/" action = extract [copy collector config] type = local source_file = "/tmp/Default_collector/" target_file = "/usr/local/nagios/etc/Default_collector/" action = copy [copy global config] type = local source_file = "/tmp/global/" target_file = "/usr/local/nagios/etc/global" action = copy reload_command = "service nagios restart" What I am wondering is why the directory structure that the default deployment.ini seems to suggest, with Default_collector and global, is different from the one that Nagios has by default, with only a folder called objects. What am I missing? Or more importantly, how does your deployment.ini look?

  Read the article

• GeForce 8800GT not even giving basic output

  - by Sam

  My Dad bought a GeForce 8800GT graphics card quite a long time ago now. It has never worked in his PC. Print out from a dxdiag: System Information Time of this report: 4/13/2010, 19:52:40 Machine name: USER-PC Operating System: Windows Vista™ Home Premium (6.0, Build 6001) Service Pack 1 (6001.vistasp1_gdr.091208-0542) Language: English (Regional Setting: English) System Manufacturer: To Be Filled By O.E.M. System Model: To Be Filled By O.E.M. BIOS: Default System BIOS Processor: Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz (4 CPUs), ~2.3GHz Memory: 2046MB RAM Page File: 1045MB used, 3296MB available Windows Dir: C:\Windows DirectX Version: DirectX 10 DX Setup Parameters: Not found DxDiag Version: 6.00.6001.18000 32bit Unicode DxDiag Notes Display Tab 1: No problems found. Sound Tab 1: No problems found. Sound Tab 2: No problems found. Sound Tab 3: No problems found. Input Tab: No problems found. DirectX Debug Levels Direct3D: 0/4 (retail) DirectDraw: 0/4 (retail) DirectInput: 0/5 (retail) DirectMusic: 0/5 (retail) DirectPlay: 0/9 (retail) DirectSound: 0/5 (retail) DirectShow: 0/6 (retail) Display Devices Card name: ATI Radeon HD 2400 PRO Manufacturer: ATI Technologies Inc. Chip type: ATI Radeon Graphics Processor (0x94C3) DAC type: Internal DAC(400MHz) Device Key: Enum\PCI\VEN_1002&DEV_94C3&SUBSYS_00000000&REV_00 Display Memory: 1012 MB Dedicated Memory: 245 MB Shared Memory: 767 MB Current Mode: 1280 x 960 (32 bit) (75Hz) Monitor: Generic PnP Monitor Driver Name: atiumdag.dll,atiumdva.dat,atitmmxx.dll Driver Version: 7.14.0010.0523 (English) DDI Version: 10 Driver Attributes: Final Retail Driver Date/Size: 8/22/2007 02:43:14, 3021312 bytes That info is from the current card that is installed in it and has been installed since its purchase roughly 3-4 years ago. When I physically install the card I put it into a purple slot on the motherboard that the old card was in (if I go into the device manager and select properties on the current card it confirms that the slot is a "PCI Slot 16 (PCI bus 2, device 0, function 0)") and boot up the computer but get absolutely no output. The screen that we have registers that it is connected to something (by not displaying the screen it does when the cable is unplugged) but just remains blank, no output at all. I recently took the card to my University and one of my friends who is better with hardware issues than I am tried it in his system and it worked perfectly. No issues whatsoever. I do not have a spec list for his system but I could get one if you need it. If you need any more information on this issue I will be happy to supply you with it as I am starting to get very annoyed with this problem ^_^

  Read the article

• Windows XP login using Radius authentication

  - by L.R.

  I would like to use existing Radius server to provide AAA for users which are logging to a Windows XP machine. Cisco can use Radius, Linux (via PAM) as well, is it possible for Windows XP?

  Read the article

• Linux Fiber Channel Host Setup Basic

  - by Jim

  I've been googling for about 4 hours now with no luck. I am trying to setup a Linux server running Oracle Server 6.3 as a Fiber Channel host. And then connect it to a Dell Compellent Fibre Channel Host contain a 500GB Volume. The Oracle server itself contains two Brocade 815 FC HBAs. I've discovered their WWN(I think) via cat /sys/class/fc_host/host1/port_name 0x100000051efc3d85 cat /sys/class/fc_host/host2/port_name 0x100000051efc3d9f The next part is where I am at a loss. I've used iSCSI before...is FC the same deal where you have an initiator and a target? If so where do I specific that in linux? I'm also new to Fiber Channel as a protocol, so i am unsure what is needed to make a transaction? WWN and port ID? Similar to IP:Port combination in the Ethernet world. I've read alot regarding using systool, multipath, fc_transport commands, however none of these is recognized as a valid command from Oracle Server 6.3 Appreciate the guidance and assistance. I installed sccsi-target-utils and can now run rescan-scsi-bus and sg_map -x. rescan-scsi-bus.sh -l -w -r Host adapter 0 (megaraid_sas) found. Host adapter 1 ((null)) found. Host adapter 2 ((null)) found. Host adapter 3 (ata_piix) found. Host adapter 4 (ata_piix) found. Scanning SCSI subsystem for new devices and remove devices that have disappeared Scanning host 0 for SCSI target IDs 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15, LUNs 0 1 2 3 4 5 6 7 Scanning for device 0 2 0 0 .... OLD: Host: scsi0 Channel: 02 Id: 00 Lun: 00 Vendor: DELL Model: PERC H700 Rev: 2.30 Type: Direct-Access ANSI SCSI revision: 05 Scanning for device 0 2 1 0 ... OLD: Host: scsi0 Channel: 02 Id: 01 Lun: 00 Vendor: DELL Model: PERC H700 Rev: 2.30 Type: Direct-Access ANSI SCSI revision: 05 Scanning host 1 for all SCSI target IDs, LUNs 0 1 2 3 4 5 6 7 Scanning for device 1 0 3 1 ... OLD: Host: scsi1 Channel: 00 Id: 03 Lun: 01 Vendor: COMPELNT Model: Compellent Vol Rev: 0505 Type: Direct-Access ANSI SCSI revision: 05 Scanning host 2 for all SCSI target IDs, LUNs 0 1 2 3 4 5 6 7 Scanning host 3 for all SCSI target IDs, LUNs 0 1 2 3 4 5 6 7 Scanning for device 3 0 0 0 ... REM: Host: scsi3 Channel: 00 Id: 00 Lun: 00 DEL: Vendor: TEAC Model: DVD-ROM DV-28SW Rev: R.2A Type: CD-ROM ANSI SCSI revision: 05 Scanning host 4 channels 0 for SCSI target IDs 0, LUNs 0 1 2 3 4 5 6 7 0 new device(s) found. 1 device(s) removed. and sg_map -x /dev/sg0 0 0 32 0 13 /dev/sg1 0 2 0 0 0 /dev/sda /dev/sg2 0 2 1 0 0 /dev/sdb /dev/sg4 1 0 3 1 0 /dev/sdc I'm not sure what this all means...

  Read the article

• LDAP authentication issue with Kerio Connect

  - by djk

  Hi, We have Kerio Connect (mail server) running on a Windows Server 2003 server on a domain. In the webmail client, users are able to change their domain password. This functionality used to work fine until a user tried to change their password a few days ago, when every password they'd try would result in the webmail client claiming their password was "invalid". I spoke to Kerio about this and they claim that this error is returned by the domain controller, which supports my initial investigations. The error that the DC is logging when an attempt is made to change the password is this: "80090308: LdapErr: DSID-0C090334, comment: AcceptSecurityContext error, data 52e, vece" The "data 52e" part indicates that this is an "invalid credentials" error. I don't see how this can be as I've tried (in the Kerio Connect configuration) various accounts that have privileges to modify accounts, including my own as I am a domain admin. I have ran 'dcdiag' (all tests) on the DC and it came back passing every single one of them. I've searched high and low for an answer to this and came up empty. Does anyone have any idea why this may have suddenly started happening? Thanks! Edit: I should mention that the passwords we are changing to do comply with the complexity policy.

  Read the article

• Starting my own server - basic recommendations and questions [closed]

  - by Ilia Rostovtsev

  Possible Duplicate: Can you help me with my capacity planning? I'm planning to start my own high-performance server and then use collocation services for keeping it up and running. I'm planning to USE it for processing videos and keeping big video site up! (using FFMpeg, MENcoder and etc.) I just need recommendations on whether listed hardware is good enough and will work together well and fast enough. Do I need anything else (missed something). I remember about CPU coolers though! ;) I'm planning to use SSD drives so please tell me if it's going to work just as regular HDDs (but much faster)? Are they going to be used as RAID (is this possible for SSDs)? Here is what I would like to get: Intel ® Server System SR1600URHSR (Urbanna) or Intel® Server System SR1695WBAC 2 x Intel Xeon X5650 4 x 16Gb DDR-III 1333MHz Kingston ECC Reg (KVR13R9D4/16) 3 x (or maybe 4x) 480Gb SSD Intel 520 Series (SSDSC2CW480A3K5) Which server system would be better? Is listed hardware new/good enough and worth buying it at the moment? Should I probably take a look at something slightly more expensive but more up to date and powerful, may be? After all as software I would like to use CentOS 6 64 bit + WHM/CPanel? Any other suggestions on maybe cheaper and same/more powerful server management system but WHM? What most important points to keep in mind when starting/maintaining your own server?

  Read the article

• Rainmeter customization issues, pretty basic

  - by user62865

  I'll admit it; I'm new to using Rainmeter. What I want to do is create two panels (one left, the other on the right) that mirror one another. One side I want to work for the Eastern US while the other for the UK. I want to keep digital clocks, the same style etc., on both sides with their respective time zone. On top of this I want to have weather reports for the whole day (Current weather and temp, morning, afternoon, and night) for each location. However, I have not been able to find any skins which allow this. For whatever reason every time I try to load a skin for a clock I can only load it for one clock of that type and I'm having the same issue with the weather skins. Could anyone please tell me what skins I should look at and how to get a mirrored look?

  Read the article

< Previous Page | 61 62 63 64 65 66 67 68 69 70 71 72  | Next Page >