Search Results

Search found 14185 results on 568 pages for 'cd drive'.

Page 65/568 | < Previous Page | 61 62 63 64 65 66 67 68 69 70 71 72  | Next Page >

• HTC Android device mounted as USB drive is read-only unless I'm root

  - by Ian Dickinson

  When I connect my HTC Incredible S to my Ubuntu 10.10 system as a USB drive, the device seems to mount OK, but is read-only unless I access it as root. For example, if I run nautilus, I can't drag and drop files to the SD-card in the phone, but if I run sudo nautilus I can. I have USB debug support set on the phone (Applications > Development > USB debugging) and I have added a rule for the device in /etc/udev/rules.d/51-android.rules on my Ubuntu system. Any suggestions as to how I can mount the drive so that I can copy content to the SD card without needing to sudo? Update Following advice from waltinator, I added the following line to my /etc/fstab: UUID=3537-3834 /media/usb1 vfat rw,user,noexec,nodev,nosuid,noauto However, the Android device is still being auto-mounted on /media/usb1 with uid and gid root. Update 2 syslog output: Nov 21 23:38:40 rowan-15 usbmount[4352]: executing command: mount -tvfat -osync,noexec,nodev,noatime,nodiratime /dev/sdd1 /media/usb1 Nov 21 23:38:40 rowan-15 usbmount[4352]: executing command: run-parts /etc/usbmount/mount.d

  Read the article

• Unable to mount an LVM Hard-drive after upgrade

  - by Bruce Staples

  I imagine this is a basic gotcha ... but I can't see it. I have a system with 2(physical) harddrives. The boot system (/dev/sda) was running 10.04 & the second drive (/dev/sdb) was just a mounted filesystem. I did a clean load of Ubuntu 12.04 overwriting /dev/sda (not an upgrade) & now cannot mount the second drive. so I do not know what to enter it into the fstab ... I had expected to use: /dev/sdb /tera ext4 defaults 0 2 But even manual mounting fails (I also have tried various "-t" options on the off chance!) sudo mount -t ext4 /dev/sdb1 /tera mount: wrong fs type, bad option, bad superblock on /dev/sdb1, missing codepage or helper program, or other error In some cases useful info is found in syslog - try dmesg | tail or so Output from disk queries indicate that it is a Linux LVM & a healthy disk still. sudo lshw -C disk *-disk:0 description: ATA Disk product: WDC WD5000AACS-0 vendor: Western Digital physical id: 0 bus info: scsi@2:0.0.0 logical name: /dev/sda version: 01.0 serial: WD-WCASU1401098 size: 465GiB (500GB) capabilities: partitioned partitioned:dos configuration: ansiversion=5 signature=00015a55 *-disk:1 description: ATA Disk product: WDC WD10EADS-00L vendor: Western Digital physical id: 1 bus info: scsi@3:0.0.0 logical name: /dev/sdb version: 01.0 serial: WD-WCAU47836304 size: 931GiB (1TB) capabilities: partitioned partitioned:dos configuration: ansiversion=5 sudo fdisk -l Disk /dev/sda: 500.1 GB, 500106780160 bytes 255 heads, 63 sectors/track, 60801 cylinders, total 976771055 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00015a55 Device Boot Start End Blocks Id System /dev/sda1 * 2048 972580863 486289408 83 Linux /dev/sda2 972582910 976769023 2093057 5 Extended /dev/sda5 972582912 976769023 2093056 82 Linux swap / Solaris Disk /dev/sdb: 1000.2 GB, 1000204886016 bytes 255 heads, 63 sectors/track, 121601 cylinders, total 1953525168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000 Device Boot Start End Blocks Id System /dev/sdb1 1 1953525167 976762583+ 8e Linux LVM LVM doesn't appear to be an option for mount or fstab. ... and here's a Smart data Screenshot from Disk Utility.

  Read the article

• Ubuntu installation does not recognize drive partinioning

  - by Woltan

  I have a 1TB drive and installed Windows 7 on a 128GB partition. When I now try to install Ubuntu 11.04 it does not recognize the Windows partition but offers the complete 1TB drive to install Ubuntu on instead. It displays: However, in the Ubuntu Disk Utility the Windows partitions are recognized. What do I need to do in order for Ubuntu to recognize the Windows 7 partition and install Ubuntu as a dual boot? Response to comments The following commands were executed and the results are shown below: fdisk -l WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util fdisk doesn't support GPT. Use GNU Parted. Disk /dev/sda: 1000.2 GB, 1000204886016 bytes 255 heads, 63 sectors/track, 121601 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x34a38165 Device Boot Start End Blocks Id System /dev/sda1 * 1 13 102400 7 HPFS/NTFS Partition 1 does not end on cylinder boundary. /dev/sda2 13 16318 130969600 7 HPFS/NTFS Disk /dev/sdb: 500.1 GB, 500107862016 bytes 255 heads, 63 sectors/track, 60801 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x14a714a6 Device Boot Start End Blocks Id System /dev/sdb1 1 60801 488384001 83 Linux parted -l Warning: Unable to open /dev/sr0 read-write (Read-only file system). /dev/sr0 has been opened read-only. Error: /dev/sr0: unrecognised disk label

  Read the article

• Repair ext4 filesystem on USB drive

  - by phineas

  Yet another filesystem question. I wanted to use a USB drive that I hadn't mounted for a month or so and was surprised by the fact Ubuntu was unable to mount it. I looked it up in the disk utility and it said it discovered a device with 17 MB instead of 2 GB. The hardware looks intact, I hope for the best for repairing the ext4 filesystem. I followed the instructions from HOWTO: Repair a broken Ext4 Superblock in Ubuntu, but I wasn't successful. # fsck.ext4 -v /dev/sdb e2fsck 1.42.5 (29-Jul-2012) ext2fs_open2: Bad magic number in super-block fsck.ext4: Superblock invalid, trying backup blocks... fsck.ext4: Bad magic number in super-block while trying to open /dev/sdb The superblock could not be read or does not describe a correct ext2 filesystem. If the device is valid and it really contains an ext2 filesystem (and not swap or ufs or something else), then the superblock is corrupt, and you might try running e2fsck with an alternate superblock: e2fsck -b 8193 Filesystem blocks are invalid, however when I run the recommended solution to try the alternate superblock, I get the following output: # e2fsck -b 8193 /dev/sdb e2fsck 1.42.5 (29-Jul-2012) e2fsck: Invalid argument while trying to open /dev/sdb plus the same error message as in the last paragraph above. Any ideas how to recover the drive? Thank you very much! Edit: testdisk won't help. I'm still stunned why the tools only discover 17 MB.

  Read the article

• How to move ubuntu 12.04 on another drive

  - by Maksim

  How I can move my ubuntu on another drive? I know about clonezilla but problem is that destination drive is smaller the source one. Gparted can't copy-paste partition if destination not the end last partition. I tried dpkg --selected-packages and apt-clone. First one just not install all my packages and removed existed that now I have no full unity and not my all packages. Second one just fail on configuration package. But before I did that way I copy-paste my /etc to new system. My partition table destination : gpt 1 1049kB 106MB 105MB fat32 EFI System ??????????? 2 106MB 12,1GB 12,0GB ext4 3 12,1GB 66,3GB 54,2GB ext4 source: msdos 1 1049kB 12,0GB 12,0GB primary ext4 ??????????? 2 12,0GB 492GB 480GB primary ext4 3 492GB 500GB 8107MB primary linux-swap(v1) Gpt not working with ubuntu that use grub 1.99. I don't know why but my laptop can't boot any device with uefi just black screen and ubuntu detect it on fresh install.

  Read the article

• Upgrading to 12.10 on an external hard drive

  - by Tom Childers

  I did some googling on this and didn't find anything specific for my situation. I currently have 12.04 installed on an external USB hard drive. It's working great. I want to upgrade it to 12.10. My bandwidth is very limited so I have a friend who will download 12.10 for me and put it on a flash stik. Then I can upgrade without having to do the download myself. Which particular version of the 12.10 download file(s) should I get? Are there alternate 12.10 downloads that have all the packages? How do I set it up so when I upgrade 12.04 I can specify that it look in some local repository for the 12.10 files? Can I just dump the 12.10 files in some local directory? Or do I have do go thru some complex commands to create a local repository? I'm pretty new to Linux so a long process of complex terminal commands will probably be a show stopper for me. Remember that my 12.04 install resides on an external hard drive. And I have a laptop with multiple USB ports. Thanks! Advait

  Read the article

• Unable to detect windows hard drive while running Ubuntu 12.04 from USB

  - by eapen jacob

  I am completely new to Ubuntu. I experimented with Ubuntu 12.04 by running it from a USB drive, in-order to recover files from my hard disc. History: My laptop is an IBM R60 running windows 7. Suddenly it gave me an error stating "error 2100 - Hard drive initialization error". I have read all the forums and most of them suggested that I remove and replace my HDD and that did not work. And one site suggested to try using Ubuntu to recover files. I booted my system from USB, and once Ubuntu came up, I choose "Try Ubuntu". It came up fine and I was able to surf ,and do other things, etc. I was unable to to access my files which are on the hard disc and "Attached Devices" is grayed out. 1- Is there any way to gain access to my hard disc to recover the files? How do I navigate to search for my files. 2- Is it just simply not possible if the hard disc themselves are not working? Is that why I`m unable to find the drives. I know its a very novice question, but hoping someone would help me out. Thank you, Eapen

  Read the article

• ubuntu 12.04 installer does not recognize drive partitions

  - by endless forms

  I recently purchased a new HP Pavilion HPE desktop running Windows 7. I am trying to install a dual-boot system with 12.04. However, when I run the LiveCD I only get as far as the "Install" window where you can select the partitions for your drives. On the bottom where it says "device for boot loader installation" I have "/dev/sda" and cannot select any other devices. All the options to change the drives are greyed out, most likely because there are no drives in the window. I partitioned my largest drive using the tools within Windows, then booted into the CD, but nothing shows up. I then used Gparted to change the new space from unallocated to an /ext2, and still nothing shows up. The installer does not recognize anything, but when I go into an Ubuntu session and use the disk utility manager I can see the partitions I made. Anything I do has to be done outside of the installer. I have no files on this new computer, so this is the perfect time to install a parallel OS. I would like avoid completely reinstalling Windows, however. I've been over the forums many times, but all the answers I've found have not worked for me. I also tried flagging the new, empty partition as boot, but that screwed Windows up. Also, the WUBI installer hits the same point and quits. I know that the disk itself is fine because I just made another dual boot system on a Gateway PC. This makes me think something within this computer is preventing the installer from "seeing" the drives. Any help would be much appreciated! Edit in response: The main part of the partitioning window shows no partitions, everything is blank. There is no way to add partitions, and all the buttons are useless. I've tried defragging my drive multiple times, and I also used the same disk to dual-boot another PC with no problems, so it's not the disk, it's definitely the computer.

  Read the article

• How to mount a network drive?

  - by Relik

  Ok so I'm trying to set-up a home file server. I'm thinking about just setting it up as an FTP server, no particular reason other than I'm familiar with FTP and samba tends to be very frustrating. Basically the set-up I'm going for, is to be-able to create multiple user accounts for the server and restrict or allow access to specific folders on each user. FTP is the only way (that I know of) to accomplish a set-up like that. My question is how can I mount an FTP server as a drive in Ubuntu so that all my applications can access it just like any other driver or folder. An example would be downloading 12.10 via torrent when it comes out, I would like to be able to tell transmission to just download the file straight to my ftp server. I know how to do this in Windows, its actually very easy. But I cant figure it out in Ubuntu. I have tried using the "connect to server" option in nautilus, and it works, but it doesn’t give me the result I want, most applications don’t see the folder, while others can. Also I am open to options other than FTP if anyone has any suggestions. I've looked into FreeNAS but that doesn’t seem to allow me to control the user accounts the way I want to. Then after all is said and done I would still need a way to mount the shares as a drive in Ubuntu. The ability to mount network drives in windows is one of my favourite features, but seeing how Ubuntu is now my daily OS and has been for about 4 years, I really need a way to accomplish the same thing in Ubuntu. Also a GUI would be preferable, seeing as there will be multiple people using this server, I would like it to be as easy as possible. EDIT: this link here seems to be almost exactly what I'm wanting to do, if I could find a GUI that can do this ill be almost set. then I would just need to find a way to hide specific folders from certain users.

  Read the article

• Lenovo ThinkPad W530 problem to activate the optical/DVD drive

  - by Marko Apfel

  Problem Sometimes my notebook shows the optical drive as power off: But the hint there is not changing this state. Solution By looking in the device manager you see the next problem: So open the properties via right mouse click. This gives you the hint to remove the drive first. “Windows cannot use this hardware device because it has been prepared for "safe removal", but it has not been removed from the computer. (Code 47)” Whether you select the comment by dragging the mouse over the the hidden part or pressing the button “Properties”. So we unplug and reinsert the ultrabay. If you think, now the system is working – you are wrong. Now the system is the meaning, that the ultrabay is unplugged. You could verify this by refresh the view in the device panel. Now there is no longer our device. Yet your great gig comes – unplug the ultra bay and reinsert it a second time! After this you could hear with a media inside, that the motor is really started and we have a working device What a difficult birth …

  Read the article

• ubuntu doesn't boot without flash drive

  - by Kasisnu

  i just installed ubuntu 11.04 onto this netbook. I had to use a flash key . during the install , i tried putting ubuntu on a separate partition , but it kept showing a 'no root file system is defined'. i didn't really know what i could do to fix it , so i decided to install it alongside windows. i have a windows 7 installation which works perfectly fine. So , the installation goes through perfectly . i give both OS's 40 Gigs of space . The comp restarts and NOTHING !. The computer boots directly into windows. During the install it said i'm supposed to be prompted at boot, and nothing happened. Ubuntu partitioned the C: drive but this partition doesn't show up in windows. If i boot using the flash drive, it shows the partition with the ubuntu installation. I tried reinstalling but now i don't get the prompt to asking me to install ubuntu. Really confused ..

  Read the article

• Flash drive error

  - by John

  when I try to install Ubuntu from flash drive, and when done from CD. I click install and then the screen goes black. Any idea how I can fix this issue? I really would like to know how I'm suppose to fix this. if anyone knows the answer to this please reply ASAP I'm very interested in getting to learn Ubuntu :) I think it would be a fun process and windows 8 is a horrible system in general. Thanks for your time

  Read the article

• Visual Studio Setup and Deployment - D Drive

  - by JB_SO

  I'm creating a VS2005 setup and deployment installer and I need to create some folders in the D: drive since the customer has a partitioned their hard-drive. I've created some folders in the filesystem view and hard-coded the 'DefaultLocation' parameter to point to the D: drive. Now my question is, is it possible to put a 'Condition' parameter that will check to see if the D: drive on the system that the software is being installed is (or is not) a CD-Drive. Thanks

  Read the article

• Remote NX login to Ubuntu, Gnome can't mount CD/DVD drive

  - by T.J. Crowder

  Even though I'm sitting next to it, I log into my Ubuntu 10.04 LTS system via NX Free Edition from another system at the moment (this is temporary, not worth buying a KVM for). Curiously, though, when I do that Gnome's auto-mounting fails for CD/DVD media (I haven't tried other kinds) with a "Not Authorized" error. For instance here's what happens when I put the Ubuntu 10.04 LTS installation CD in: This does not happen if I log into it locally (not via NX) with the same user account. When using NX, I can mount the media if I go to mount directly: tjc@midnight:~$ sudo mkdir /media/dvd tjc@midnight:~$ sudo mount -r -t iso9660 /dev/sr0 /media/dvd tjc@midnight:~$ ls /media/dvd autorun.inf casper dists install isolinux md5sum.txt pics pool preseed README.diskdefines ubuntu wubi.exe ...which, along with the "not authorized" error, suggests some kind of permissions problem to me (doh). What I find odd is that the same user is involved in both cases (local and via NX). I'm new to Ubuntu on the desktop (used it and other distros on servers for years), so I'm afraid I don't know how this auto-mounting is happening. I think it's handled by the gvfs package and its daemon, but that's about as far as I got (and perhaps I've taken a left turn even getting that far). Although I can work around it with mount, does anyone know how I might get auto-mounting to work?

  Read the article

• Issue booting Linux Mint from Live CD?

  - by Vee

  I had Windows 8 and Linux Mint 15 dual booted on my laptop. When I first installed Linux, I wasn't able to load into because the grub would not show. To fix this, I used boot-repair from a Live CD. This time, I updated to Windows 8.1 and it showed a watermark telling me my secure boot wasn't configured properly. I then went and enabled secure boot (BIOS) and I believe it was after that that the Grub would not show once again. I tried to boot from a Linux CD again but when I try, it gives me the following errors: error: failure reading sector 0x0 from 'hd1' error: you need to load the kernel first. Press any key to continue... Before, it was giving me an error with sector 0x6d200 or something instead of 0x0. I am completely unsure of what to do. I do not know what other details to give except that this my have happened after I enabled secure boot, and I actually clicked reset to default setting so I am unsure if any other settings were changed in the BIOS menu.

  Read the article

• Access to CD/DVD Drive is Denied through Windows 7 Explorer (Permission Problem)

  - by Synetech inc.

  A while ago I started having trouble with my optical drives. Both of them keep showing up in Explorer as CD/DVD drives on boot, but as soon as I put a disc in either one, it suddenly turns into a hard-drive—“local disk” is displayed in the Type column, though the File System column remains UDF/CDFS. (I though that maybe it was a permission issue on the registry key in HKLM\System\CurrentControlSet..., but I’m not so certain because of the next test.) When I try to open a disc (of any type), I get an access denied error message. If I open an elevated command-prompt, I am able to access the files. Also, if I kill Explorer and run it from an elevated command-prompt (thus giving Explorer elevated permissions), then I can access the files from Explorer. I’ve tried uninstalling and reinstalling the devices without success. The security dialog indicates that there are none set for the drives (no owner and no permissions). I tried setting the owner, but am only able to do so if there is a disc in it (it complains if it is empty), but the settings do not stick (if I immediately open the security dialog after setting it, it is empty again). I tried setting permissions, but that gives an error. I’ve included a screencap-flowchart of the security dialog of one of the drives below. (Yes, I made sure that there are no upper- or lower-filters, and yes, I ran sfc. I also made sure that in the policy editor, “devices: restrict CD-ROM...” is not set.) Does anyone know what the owner and permissions are supposed to be for optical drives and how to reset them?

  Read the article

• How to rename or relabel a Network Drive label

  - by Subhen

  I am mounting a network drive to windows using WNetAddConnection2 which is working fine but while mounting the drive by default it assigns the name as Server IP and FolderName , NDSTestFolder on 'NAS server (172.24.17.116)'(R:) I need to rename the drive label using SetVolumeLabel but this fails for the network drive saying invalid parameter while SetVolumeLabel works fine for the local drives. Is there a way I can rename or relabel a network drive? So that I can change NDSTestFolder on 'NAS server (172.24.17.116)'(R:) to NDS@MyFolder (R:)

  Read the article

• Using an APT proxy for downloads during installation

  - by intuited

  During system installation from a Desktop LiveCD (10.10) I checked the "Download updates during installation" option. Before starting the install I had configured an apt proxy server; this had been used correctly for my various package installs prior to launching the system installation GUI. However, the downloads taking place during the installation are not using the proxy. Is there a way to force usage of an APT proxy during installation?

  Read the article

• Why does my ReadyNas 4200 have a constant beep post disk failure

  - by swagner88

  Went to check on a high pitched constant beep coming from the server room and discovered that all the LED lights on the disks were black except one which had a constant green. Post a Re-boot nothing changed. Console indicated that that particular drive has failed. Pulled the drive out and BAM everything is fine. Except, the high pitched beep remains. Plan is currently to replace the drive with a new same size drive we happen to have purchased for expansion. My question is, what will this do? Will the NAS accept the new drive as a replacement for the failed one and decide to shut-up? The Manual for the device is almost to straight forward and says that I can just swap drives out as I need but I find that difficult to believe: http://www.readynas.com/download/documentation/HM/RN4200_HW_24May10.pdf

  Read the article

• Recover Ubuntu grub without LiveCD - Can't boot with Ubuntu LiveCD after install Windows

  - by Paulocoghi

  I installed Windows after installing Ubuntu. But Ubuntu is still intact in its partition. I'm trying to run the Ubuntu LiveCD to recover grub, but the LiveCD no longer works. It stops the boot process and does not load completely. I can not run Ubuntu in live mode to recover grub. Is there any way to recover the grub/grub2 without the LiveCD? Edit: [Important] I've downloaded a new Ubuntu 10.10 ISO. I also did the MD5 check. It's all right. Then, I recorded this .iso and still can not load the LiveCD to the end.

  Read the article

• I cannot read second internal HD

  - by Nathan

  I reformatted my Win "C" drive and loaded Ubuntu 11.04. The second internal HD of course is not read. It is shown in 'disk utility'. I try to mount it in disk utility but I get an error message error mounting: mount exited with exit code 1: helper failed with: mount: according to mtab, /dev/sda1 is already mounted on / One problem I see is the error relates to sda1, but I am trying to mount sdb. Unfortunately, I am windows literate and ignorant of the coding for linux. Can someone help me with the code to mount my second drive (sdb) Nathan

  Read the article

• Recruitment Drive - Things Don't Always Go As Planned - Stay Flexible by Kalyan Neelagiri

  - by david.talamelli

  I am one of the Recruiters for Oracle and work in our India Recruitment Team. When we are hiring for multiple positions we often hold Recruitment Events to interview a large number of people as effectively as possible. These Events are often held on the weekend as many people are not free to attend an all day event during the working week. Just recently during a recruitment campaign we were running I was tasked to set up a Recruitment Event for some roles we were hiring for. I have set up and run weekend recruitment events in the past which have all run smoothly. However, this time arranging this recruitment event was quite a challenge for me. The planned event was taking place on a Saturday. I had almost sent out the confirmed scheduled list of candidates to the respective hiring team on Friday and was on track for the event to take place, but unfortunately there was breaking news in the media that there was a strike called in the city because of some political agitations and protests taking place on the event day. The hiring manager had rushed to me asking for my thoughts and ideas. I was in two minds on what to do. One on hand I was not ready to cancel the event because of all the work that so many people had put into getting this prepared and also I did not want to reschedule the event at the last minute if I did not need to. On the other hand I understood it may be best to reschedule the event as people may not be able to attend based on the political protests taking place on the day. In the end I decided to gather and check for other options because this might cause confusion and a problem for the scheduled candidates to drive in to the venue. So we had concluded to reschedule our event plans and moved the event to the next week. The good news is that we successfully executed this recruitment drive the following Saturday. We were glad that 100% of the candidates we able to make it to the new interview date and despite all the agitations in the city we were successful in hiring people for all the roles we had open. Things do not always go as planned. The best laid plans can sometimes be for nought based on external factors outside of our control. What this experience has taught me is that rather than focus on the negatives when you are thrown a curveball the best approach is to stay flexible and focus on finding ways to reach your outcome. Your plans may need to change but you can still achieve the results you are after if you have the right mind set.

  Read the article

• No Rush, Defragging that Drive can Wait [Humorous Image]

  - by Asian Angel

  That drive is only fragmented a little bit…nothing to worry about there. View a Larger Version of the Image You should defragment this volume. Ya think?! [via Fail Desk] What’s the Difference Between Sleep and Hibernate in Windows? Screenshot Tour: XBMC 11 Eden Rocks Improved iOS Support, AirPlay, and Even a Custom XBMC OS How To Be Your Own Personal Clone Army (With a Little Photoshop)

  Read the article

• Booting the liveCD/USB in efi mode fails on tablet xe700t1a

  - by F.L.

  My tablet is Samsung Series 7 Slate (xe700t1a-a02fr). It operates an intel sandy bridge architecture. The main issue about this tablet is that it ships with a windows 7 install in (U)EFI mode (GPT partition table, etc.), so I'd like to get an EFI dual boot with Ubuntu. But it seems I can't boot on the liveCD in EFI mode. It starts loading (up to initrd), but I then get a blank (black) screen. I've tried the nomodeset kernel option (as well as removing quiet and splash) with no luck. I have used the 12.04.1 desktop iso (I have read somewhere that it is the only one that can boot in EFI mode). What are the other leads I can follow ? thanks

  Read the article

• How to setup Thinkpad features on Thinkpad T500

  - by gijoemike

  I have a IBM-Lenovo Thinkpad T500. I was previously a exclusive windows user, but recently installed ubuntu and loving it because of speed and interface. The only thing is that I don't get some features that I came to enjoy in windows. I need help setting these up: Hard-drive protection - active protection software that pauses drive when there is movement My printer doesn't work (can't find the driver for this one): canon Ip2600 A way to change which graphics chip to use while in OS. I have both the integrated and non integrated (dual-graphics). (If not easy to setup, I know there's a way to do it before it boots, but don't know how). CPU performance level - in windows you can pick "high performance", "power saver", etc.. to save batteries. My integrated camera w/light - it works but need an app where I can record videos, take snapshots, etc. can't find one that works. Thanks!

  Read the article

< Previous Page | 61 62 63 64 65 66 67 68 69 70 71 72  | Next Page >