Search Results

Search found 7940 results on 318 pages for 'intel wireless'.

Page 65/318 | < Previous Page | 61 62 63 64 65 66 67 68 69 70 71 72  | Next Page >

• How to enable desktop effects on Ubuntu 10.04 after upgrade from Ubuntu 8.04?

  - by Manohar Bhattarai

  I upgraded my Ubuntu 8.04 to Ubuntu 10.04. When I try to enable desktop effects it says "Desktop effects could not be enabled". The output of "lspci | grep VGA" is : 00:02.0 VGA compatible controller: Intel Corporation 82845G/GL[Brookdale-G]/GE Chipset Integrated Graphics Device (rev 03) Hardware drivers says there is no propriority hardware driver. I installed nVidia driver but I think my is an Intel graphics device. Please help.

  Read the article

• How to fix "ndiswrapper not found"?

  - by Tom

  I've been using ndiswrapper to make work some wireless cards using its Windows drivers, because they are not yet supported by free Linux drivers. Until Ubuntu 12.04. Now, I can install Windows Wireless Network Drivers (ndisgtk) from Ubuntu Software Center but when I try to load the driver, I get an error message saying FATAL: Module ndiswrapper not found. I get the same error if I type on a terminal sudo modprobe ndiswrapper. How can I workaround this bug until it's fixed?

  Read the article

• Wifi card on an virtualbox's ubuntu [duplicate]

  - by user1611830

  This question already has an answer here: Wireless Network in Virtualbox 8 answers I am using a virtualbox to run ubuntu on an osx machine. The problem is that I can't get any wireless extensions when running iwconfig. How can I manage that to connect directly my ubuntu to an wifi card ?

  Read the article

• My video Card is not working at its best

  - by Chitrank Dixit

  I am using Ubuntu on hp pavillion g6 laptop but my video card intel HD graphics family is set always to standard and not performs best. When I minimize any application windows in my Ubuntu 12.04 the outline of the window remains on the screen and even it does not give me option to resize the doc at the left hand side. Please help me out I have installed mesa-utils and updated the system Even did the grub settings with nomodeset but do not know the grub settings Intel HD graphics Family (Sandybridge).

  Read the article

• corrupted, hidden, wireless network adapter from "Network Connections" in Windows 7

  - by srihari reddy

  The issue is that when I install a wireless network adapter on my Windows 7 Professional machine I have no connectivity, the system tray icon has a red X. First, I tried the obvious, install updated drivers from the manufacturer. When I did this, the Network Connections icon had gray bars and there was no connectivity. So I tried installling the network adapter on a different computer on the same network and I verified that it does work with no issues. Next, I ran scan disk with no issues. Next, I ran sfc as admin with no issues. At this point I turned to the router and turned SSID broadcast on but that didn't help. I turned MAC address filtering off at the router but that didn't help. Whenever I installed the original network adapter (a wireless N usb adapter with WPA2 TKIP+AES) it showed up as "Wireless Network Connection 2" with a grayed out icon and no connectivity. Lastly, I tried installing two different "verified working" usb wireless adapters on to the Windows 7 Pro machine. The results were the same "Wireless Network Connection 2" that had a green bar icon but no connectivity. I installed the manufacturers software and it indicated the NIC was not there even thought the driver installed successfully in Device Manager. I guess I should mention, I first tried (insanely in vain) to use the (worthless) Windows Network troubleshooter. The results were....drumroll please... There is a problem with the network adapter... well No Duh! Also, during all of this the network adapter is always showing as "Working Properly" in the properties dialogue of Device Manager for the wireless NIC. I checked for hidden devices in Device Manager but there were none. Here is my fundamental question that I've tried to find in the Windows 7 support center with no luck. How do I remove/delete/uninstall network adapters from the Windows 7 registry? in particular hidden, corrupted network adapters, that used to be working.

  Read the article

• WRT54GL Tomato Router in Client wireless mode to an iPhone Personal Hotspot

  - by Gordo

  I am trying to connect a router with Tomato firmware to an iPhone 4. The goal is to connect to the Personal Hotspot in Client Wireless mode. This should allow wired and wireless users to connect to the router rather then the iPhone. In theory this should be possible but I am having difficulty. Router Linksys WRT54GL Tomato 1.28.1816 firmware iPhone iPhone 4 iOS 5.1 (9B176) Carrier Rogers Wireless Personal Hotspot works with other devices, wifi/bluetooth/usb iPhone Personal Hotspot settings Mode: B/G Security: WPA or WPA2 Personal Encryption: AES Router IP: 172.20.10.1 Subnet: 172.20.10.0 Min IP: 172.20.10.2 Max IP: 172.20.10.14 maximum number of wireless tethered hosts is 5 I have followed the directions here: http://www.wi-fiplanet.com/tutorials/article.php/3810281 Ensured that the router subnet does not 'collide' with the iPhone subnet. Here is the configuration of the Tomato 'Basic - Network - Wireless' section: http://i.stack.imgur.com/pbmTB.png I have tried several variations of this configuration, but nothing seems to work. NOTE: I have successfully connected to my own wifi network in Wireless Client mode, so I am confident that there are no bad cables or other hardware issues. I would prefer to use Tomato, but DD-WRT maybe my only other option. Thanks!

  Read the article

• How can I use Linksys WPSM54G print server as a bridge for another machine AND also share the printe

  - by user26453

  I have a Linksys WPMS54G currently sharing a printer via the USB port with the rest of my network via the wireless. Is there any way to set it up so that the ethernet port is bridged over the wireless adapter portion? i.e., be able to uplink another machine or switch into the network via the WPMS54G's ethernet port? Update: The network architecture is as follows: (1) Linksys WRT54G router that serves as a router, DHCP server, and wireless access point for the network. Fairly standard configuration (3) Laptops that are used throughout the house via wifi (1) Linksys WPSM54G printer server that connects via wireless to the router, in a separate room with a printer attached to print seerver's USB port along with (1) Un-networked desktop in the same room Since the printer is plugged into the USB port of the WPSM54G, I am wondering if I can connect the desktop to the ethernet port of the WPSM54G and have it bridged over the wifi to the router. The twist here is that the ethernet is initially used to connect the wireless print server to the router (for configuration, can't configure it wirelessly if you are initially on a encrypted network). Now instead of using that ethernet port as a way to connect the print server to the network (via the router), I want to use the ethernet port as a way to connect another computer to the network, in effect bridging into the router via the print server, while still sharing the printer (attached via USB) through the print server. If this is not clear, please comment. To be clear, the computer I want to connect/bridge into the network does not have a wireless card, is far from the router, and I do not want to lay ethernet cable to connect it. While I could certainly buy a legitimate wireless bridge to accomplish this, I figured since the print server already has an ethernet port, see if I can't use that.

  Read the article

• Solid-State Drives From a Developer's Perspective

  Putting to work Intel's X25-M SSD Solid-state drive - Intel - Intel Corporation - SolidState - Storage

  Read the article

• What is the difference between these Pentium Extreme Edition CPUs?

  - by Giffyguy

  The CPU in question is the Pentium Extreme Edition 955. Intel's website shows four "versions", but for the most part they all look identical. They even share the same set of ordering codes. But one of them has a substantially lower TDP, which is seemingly unexplainable - since everything else is the same. Two of them say "LGA775, Tray" and I have no idea what "Tray" means either. Also, two of them have a different SPEC code. What I need to know is: What does "LGA775, Tray" mean? Why does the one CPU have a lower TDP? And what does that mean for me? Does that mean lower maximum power consumption? Does it mean the CPU may be more stable/endurant, because of a lower heat output? Why do two of them have a different SPEC code, and what does this mean? Finally, what does PLGA775 (as opposed to LGA775) mean, and do I need to be worried about that? Information from Intel's wbsite: Intel® Pentium® Processor Extreme Edition 955 (4M Cache, 3.46 GHz, 1066 MHz FSB) with SPEC Code 1 Boxed Intel® Pentium® Processor Extreme Edition 955 4M Cache, 3.46 GHz, 1066 MHz FSB LGA775 PLGA775 B1 95 Watts BX80553955 SL94N 2 Intel® Pentium® Processor Extreme Edition 955 4M Cache, 3.46 GHz, 1066 MHz FSB LGA775, Tray PLGA775 B1 130 Watts HH80553PH0994M SL94N 3 Boxed Intel® Pentium® Processor Extreme Edition 955 4M Cache, 3.46 GHz, 1066 MHz FSB LGA775 PLGA775 B1 130 Watts BX80553955 SL8WM 4 Intel® Pentium® Processor Extreme Edition 955 4M Cache, 3.46 GHz, 1066 MHz FSB LGA775, Tray PLGA775 B1 130 Watts HH80553PH0994M SL8WM

  Read the article

• How to squeeze the maximum performance out of Unity and GNOME 3?

  - by melvincv

  I see that I do not get good performance with the new Unity desktop, but I should say that Unity has improved a lot since the last edition Ubuntu 11.10. How to squeeze the maximum performance out of 1. Unity 2. GNOME 3 My system specs: -Processors- Intel(R) Pentium(R) Dual CPU E2180 @ 2.00GHz -Memory- Total Memory : 2049996 kB -PCI Devices- Host bridge : Intel Corporation 82G33/G31/P35/P31 Express DRAM Controller (rev 10) PCI bridge : Intel Corporation 82G33/G31/P35/P31 Express PCI Express Root Port (rev 10) (prog-if 00 [Normal decode]) VGA compatible controller : Intel Corporation 82G33/G31 Express Integrated Graphics Controller (rev 10) (prog-if 00 [VGA controller]) USB controller : Intel Corporation N10/ICH 7 Family USB UHCI Controller #1 (rev 01) (prog-if 00 [UHCI]) USB controller : Intel Corporation N10/ICH 7 Family USB UHCI Controller #2 (rev 01) (prog-if 00 [UHCI]) USB controller : Intel Corporation N10/ICH 7 Family USB UHCI Controller #3 (rev 01) (prog-if 00 [UHCI]) USB controller : Intel Corporation N10/ICH 7 Family USB UHCI Controller #4 (rev 01) (prog-if 00 [UHCI]) USB controller : Intel Corporation N10/ICH 7 Family USB2 EHCI Controller (rev 01) (prog-if 20 [EHCI]) PCI bridge : Intel Corporation 82801 PCI Bridge (rev e1) (prog-if 01 [Subtractive decode]) ISA bridge : Intel Corporation 82801GB/GR (ICH7 Family) LPC Interface Bridge (rev 01) IDE interface : Intel Corporation 82801G (ICH7 Family) IDE Controller (rev 01) (prog-if 8a [Master SecP PriP]) IDE interface : Intel Corporation N10/ICH7 Family SATA Controller [IDE mode] (rev 01) (prog-if 8f [Master SecP SecO PriP PriO]) SMBus : Intel Corporation N10/ICH 7 Family SMBus Controller (rev 01) Ethernet controller : Intel Corporation PRO/100 VE Network Connection (rev 01)

  Read the article

• How can an iPhone access another non-iPhone device over wireless or bluetooth?

  - by Tai Squared

  I'm trying to figure out if an iPhone can connect to another non-iPhone device over wireless or bluetooth and have seen conflicting information. Much of what I've found was before version 3.0 of the SDK came out, when it certainly wasn't possible. Looking at questions like this mention you can't connect to an arbitrary device unless if it's part of the "Works for iPhone" device. Do I need hardware that is part of this program? Looking through the Apple documentation, it mentions connecting two iPhones, not an iPhone to another Bluetooth device. Then there are articles like this that includes this quote ...and with the newly-announced "standard support" should allow file transfer between the iPhone and a computer, as well as between nearby iPhones Other questions mention Bonjour, and the Apple documentation talk about connecting to Bonjour devices, but can an iPhone connect to any Bonjour device? Does it have to have a wifi connection, or can it use Bluetooth? Even if I could use Bluetooth to connect to another device, it won't be available on first generation iPhones and iTouches, I believe. Is that correct? I'm thinking of an iPhone application that would need to communicate with other non-iPhone devices in the area, probably using Bluetooth, but possibly a direct wireless connection. What are the possibilities and limitations of this approach? Is it not possible to have an iPhone connect to an arbitrary Bluetooth device? Does the other device have to be on a wireless Bonjour network that? I'm trying to figure out if it's even possible for this to work or if it's not worth the effort.

  Read the article

• Stable ubuntu distribution for a broadcom bcm4313 wireless driver and an nvidia 630 graphics adapter

  - by Vivek Pradhan

  I have been trying to completely shift to ubuntu or a linux distro for almost 2 years now. I have tried all the ubuntu distros starting from 10.04 through 11.10, but there has always been some bugs with the display drivers or the wireless cards not being recognised and the additional drivers suggested from the ubuntu community not doing the trick always. I tried a lot to fix bugs, checked a lot of forums, launch pad, got some of them fixed, but could not really get a neat and complete ubuntu machine set up till now. Now I really like the whole open source community and the linux platform, my pc at home runs ubuntu 11.04 perfectly but there have been some glitches always with ubuntu on my laptop that has forced me to stick with windows only. Now I am currently on an hp dv6 laptop that has the broadcom bcm4313 wireless driver and the nvidia 630gtm graphics(optimus) driver. Now I tried to do some research on the support of these drivers in linux machines but could not get anywhere. So I would really appreciate if you guys could suggest some linux distro that I could use that has full support of these drivers or has stable bug fixes for these kind of issues. I tried precise pangolin (LTS) through a live CD but i still see a problem with wifi networks which is a little frustrating. Please help me find the perfect match for my laptop :P I would gladly provide any other information necessary.

  Read the article

• Old Lock Retrofitted for Wireless and Key-free Entry

  - by Jason Fitzpatrick

  What do you do if the old key your landlord gave you is poor fit for your apartment’s lock? If you’re the geeky sort, you build a wireless unlocking module to do the work for you. Instructables user Rybitski writes: The key to my apartment never worked quite right because it is a copy of a copy of a copy. I am fairly certain that the dead bolt is original to the building and the property manager seems to have lost the original key years ago. As a result unlocking the door was always a pain. Changing the lock wasn’t an option, but eliminating the need to use a key was. To that end, he built the device seen in the video above. An Arduino Uno drives a servo which in turn opens the deadbolt. The whole thing is controlled by a simple wireless key fob. Hit up the link below for the full build guide including code. Key Fob Deadbolt [via Hack A Day] How To Delete, Move, or Rename Locked Files in Windows HTG Explains: Why Screen Savers Are No Longer Necessary 6 Ways Windows 8 Is More Secure Than Windows 7

  Read the article

• How do I connect my NetXtreme BCM5755M Gigabit Ethernet PCI Express in y Dell latitude d630?

  - by Stanton.Sculpture

  Trying to get my 09:00.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5755M Gigabit Ethernet PCI Express (rev 02) working with my wifi. I just installed Raring Ringtail on this dell latitude D630 and I can't get it to connect without a wifi dongle. This is what I got when I typed sudo lshw -c network: *-network description: Ethernet interface product: NetXtreme BCM5755M Gigabit Ethernet PCI Express vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:09:00.0 logical name: eth0 version: 02 serial: 00:21:70:98:04:32 capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm vpd msi pciexpress bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=tg3 driverversion=3.128 firmware=5755m-v3.29 latency=0 link=no multicast=yes port=twisted pair resources: irq:44 memory:fe8f0000-fe8fffff *-network description: Wireless interface physical id: 2 bus info: usb@2:1 logical name: wlan0 serial: 7c:dd:90:11:a0:10 capabilities: ethernet physical wireless configuration: broadcast=yes driver=rt2800usb driverversion=3.8.0-31-generic firmware=0.29 ip=10.0.0.8 link=yes multicast=yes wireless=IEEE 802.11bgn Also, when I go to additional drivers in the software and updates settings, no proprietary drivers show up. I've tried sudo apt-get install b43-fwcutter firmware-b43-installer because it worked on a bunch of old Dell laptops that I converted over before, but it didn't work on this one. Is this driver even compatible with wifi? Please help.

  Read the article

• mediatek 7630e 802.11 wifi bgn adapter failed in hp probook G1

  - by user257026

  id: network description: Network controller product: MT7630e 802.11bgn Wireless Network Adapter vendor: MEDIATEK Corp. physical id: 0 bus info: pci@0000:04:00.0 version: 00 width: 32 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list configuration: latency = 0 resources: memory : b0600000-b06fffff THIS IS MY WIFI driver details of my notebook pc.... BY the way.. recently I have installed ubuntu 14.04 LTS .....my every hardware is working properly except wifi adapter.... in windows it(wifi) was also working properly.. from hp driver center I have download linux kernel driver package ..Actually those driver package was rpm package ...then i have convert it to .dev file using alien...but the true fact is no result though..... again,previously released ubuntu version(such as 12.04LTS) causes the same issue ...those versions have same bugs there.. after googling web i have few results but no reliable outcomes to solve my problem(wifi issue) ..... As I am new user in ubuntu I cannot able to solve the problem drastically like pro(superuser).. https://answers.launchpad.net/ubuntu/+question/243203 How do I get a Mediatek MT7630E 802.11bgn Wi-Fi Adapter working? here two links about my issuses but I am confused what can i do (feeling meh)??? is there anyone who can help me in this issues...?? my notebook model is HP probook 450G1 Question #243203 : Questions : Ubuntu My HP laptop uses MediaTek's (MEDIATEK Corp.) MT7630e 802.11bgn Wireless Network Adapter. I cannot access wifi after installing Ubuntu myself and there are no drivers available - or so it seems. Apparantly some laptops which use this card came with Ubuntu pre-installed, with working drivers. These d… answers.launchpad.net Question #243203 : Questions : Ubuntu My HP laptop uses MediaTek's (MEDIATEK Corp.) MT7630e 802.11bgn Wireless Network Adapter. I cannot access wifi after installing Ubuntu myself and there are no drivers available - or so it... ANSWERS.LAUNCHPAD.NET

  Read the article

• Use Network-Manager to Connect to a wifi Access Point on the command-line

  - by Stefano Palazzo

  I'd like to connect to a wireless access point from the command-line. ideally, I'd only need the name of the AP. But the hardware-address would work as well. I know I can use nmcli to connect to a managed network connection, but in my case, the access point may not be configured for Network-Manager yet (See the difference between the output of nm-tool and nmcli con). Example output of nmcli: Auto pwln 3a3d62b1-bbdf-4f76-b4d2-c211fd5cfb03 802-11-wireless [...] Wired Network aa586921-accf-4932-98c4-c873c310f08e 802-3-ethernet [...] Cisco-UDP Uni 7f94847b-04dc-40b7-9955-5246fb77cc65 vpn [...] T-mobile (D1) 867f345a-cbbf-4bd4-b883-a5e5ae0932f0 gsm [...] Example output of nm-tool: State: connected - Device: eth1 [Auto pwln] ---------------------------------------------------- [...] Wireless Access Points (* = current AP) *pwln: Infra, [...], Freq 2472 MHz, Rate 54 Mb/s, Strength 80 WPA WPA2 WLAN: Infra, [...], Freq 2422 MHz, Rate 54 Mb/s, Strength 20 WPA WPA2 [...] How do I connect to an access point that may or may not be known to NM? Extra: Finding out if the connection needs a pass-phrase, and submitting it on the command-line as well would be great too (that is to say It'd be nice if network-manager wouldn't pop open any keyring dialogues or errors on the gui)

  Read the article

• Network Issues only on one network with a Broadcom BCM4312

  - by Ryan McClure

  My Ubuntu 11.10 laptop is having network connection issues...only on one network. I have a BCM4312 card and I'm using the proprietary driver. Whenever I connect to a network over wireless connection, I have no trouble except for one network. In my dorm, if I try to connect to the wireless network, it stays connected from anywhere to 30 seconds to 30 minutes before it will still be "connected" according to the indicator but there is no incoming/outgoing internet connection. This only happens in this building. Other networks with the same name at other buildings on my campus have no issue whatsoever. I took it to the tech department here and they keep claiming it's my laptop; but, if I can connect to other networks with absolutely no issues, why can't my laptop connect here? So, here's my question: Is it my laptop, or is it the network? As a side note, no one else that I know has issues on this network but one; she's running Windows 7 and I forget what kind of laptop it is. One of the people in my hall runs Ubuntu 12.04 and has no problem with the wireless. What do you all think of this?

  Read the article

• Dlink DWA-643 ExpressCard / Atheros AR5008 can't connect to wifi networks

  - by Justin Kelly

  I've just purchased a D-Link DWA-643 Xtreme N ExpressCard Notebook Adapter - but it can't connect to my wireless network The card is listed on the FSF website and - refer links below: http://www.fsf.org/resources/hw/index_html/net/wireless/index_html/cards.html http://www.dlink.com.au/products/?pid=550 Ubuntu see the card as using the Atheros AR5008 chipset - refer image below The card lights up and I can see that available wifi networks using this card - so it seems to 'just work' on ubuntu 12.04 but when i try and connect to my networks - it fails I've tried setting the network to all the different options (WEP, WPA2, no encryption, etc.. b/g/n ) but ubuntu sill cant connect to it I've also installed wicd but still couldn't connect Has anyone got a DWA-643 to work in Ubuntu? Or does anyone have any suggestion on how to get it to connect?? Any help would be greatly appreciated Note: the laptop has built in wifi but its broadcom, works but with dialup speed connection - and i've had nothign but trouble using the boardcom drivers so purchased the FSF recommended PCI expresscard as i hoped it would 'just work' on the latest Ubuntu i've have tried to disable the built in wifi - broadcom - but even with the broadcom uninstall and unavailable it didnt help the dlink to connect previously I had MAC address filtering on the router - i've added the dlinks MAC - and also disabled MAC address filtering - still no luck lspci output below: 18:00.0 Network controller: Atheros Communications Inc. AR5008 Wireless Network Adapter (rev 01) Subsystem: D-Link System Inc Device 3a6f Flags: bus master, fast devsel, latency 0, IRQ 18 Memory at e4000000 (64-bit, non-prefetchable) [size=64K] Capabilities: [40] Power Management version 2 Capabilities: [50] MSI: Enable- Count=1/1 Maskable- 64bit- Capabilities: [60] Express Legacy Endpoint, MSI 00 Capabilities: [90] MSI-X: Enable- Count=1 Masked- Capabilities: [100] Advanced Error Reporting Capabilities: [140] Virtual Channel Kernel driver in use: ath9k Kernel modules: ath9k

  Read the article

• Screen flickering when using midrange brightness values on Dell XPS

  - by Eliran Malka

  After a fresh Ubuntu install on my laptop, I discovered the function keys for screen brightness control (Fn+F4 and Fn+F5) are not working. Digging around here, I managed to get it to work by following the solution suggested on this post and that one, but alas — after applying it, a strange problem occurred: Setting the brightness level to any value other than minimum or maximum, the screen starts flickering back and forth from the selected level to full brightness, apparently due to Dell's power saver attempting to dim the screen to adjust the brightness levels. I looked up for a solution here on the site, and possibly everywhere, with no avail. Also tried: To manually control the brightness by configuring the ACPI level (setting values by echo [some_value] | sudo tee /sys/class/backlight/[vendor]_backlight/[some_key], without success. Installing the Intel graphics driver, thinking it's missing. Realized it's installed out of the box by installing Mesa Utils. How to resolve this? Environment Model: Dell Studio XPS 13 OS: Windows 7 64bit / Ubuntu 12.04 32bit (dual boot) Graphics Driver: Intel HD 3000 (Sandybridge Mobile x86/MMX/SSE2) lshw -C display output: *-display description: VGA compatible controller product: 2nd Generation Core Processor Family Integrated Graphics Controller vendor: Intel Corporation physical id: 2 bus info: pci@0000:00:02.0 version: 09 width: 64 bits clock: 33MHz capabilities: msi pm vga_controller bus_master cap_list rom configuration: driver=i915 latency=0 resources: irq:47 memory:f0000000-f03fffff memory:e0000000-efffffff ioport:2000(size=64)

  Read the article

• wifi not working hp dv4

  - by Blaze

  i get this output for sudo lshw -C network : *-network description: Ethernet interface product: RTL8111/8168B PCI Express Gigabit Ethernet controller vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:08:00.0 logical name: eth0 version: 06 serial: 3c:4a:92:cd:63:98 size: 10Mbit/s capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress msix vpd bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=half firmware=N/A latency=0 link=no multicast=yes port=MII speed=10Mbit/s resources: irq:42 ioport:3000(size=256) memory:c0404000-c0404fff memory:c0400000-c0403fff *-network DISABLED description: Wireless interface product: RT5390 [802.11 b/g/n 1T1R G-band PCI Express Single Chip] vendor: Ralink corp. physical id: 0 bus info: pci@0000:0a:00.0 logical name: wlan0 version: 00 serial: 90:00:4e:82:3c:5b width: 32 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=rt2800pci driverversion=3.0.0-17-generic-pae firmware=0.34 latency=0 link=no multicast=yes wireless=IEEE 802.11bgn resources: irq:17 memory:c2500000-c250ffff i cant enable the wifi using the fn+f12 key.. its just stuck. In windows 7 it gets enabled when i press the same keys. but this happens after it gets booted up... i just want to use the wifi in anyway possible. can anybody help?

  Read the article

• Just installed 13.04 and everything is fine except I cannot connect to the internet. Any thoughts?

  - by razorccatu

  I just installed Ubuntu 13.04 on my HP G62 laptop and the install went smoothly. I did the install off of a USB drive after trying ubuntu. While I was testing it, I connected to my Wireless with out issue and surfed a little. After the install, no wireless. I can still connect to my wireless network (at least it tells me I'm connected at full strength) but No servers can be found. I attempted to ping Google to no avail and I attempted to ping my router to no avail. I tried to then hard wire the machine and once again it told me that I was connected but I was not. When I ran dmesg, I got the following message: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolvabe. Please install nss-hostname! Is the hostname the issue? if so, how do I resolve it with out internet connection? If it's not the issue, how do I move forward? Thanks for any help. EDIT. I forgot to attach the image of my ifconfig if that might help.

  Read the article

• How to get Unity working on dual gpu laptop?

  - by Mourgos

  I recently bought a new laptop (Asus X53S series) that has two GPUs, an NVidia GeForce GT 540M and an integrated Intel GPU (I believe it's called Intel HD graphics 3000). I installed the recommended restricted NVidia drivers after a clean Ubuntu 11.10 install. In the 'additional drivers' program I get the message: "This driver is enabled and in use", although when I try to open the NVidia X Server Settings it says "You do not appear to be using the NVIDIA X driver." which seems to be the case since Ubuntu only starts using Unity 2D. I've had the same issue in 11.04 and I was forced to use the nouveau driver just to get unity working, but since I get quite a few crashes with it I really want to get the propriety driver working this time around. Since I've never had this issue with older laptops, I can only assume it is caused due to the dual gpu configuration. How do I get Ubuntu to use the propriety drivers, or is there any workaround to get the integrated Intel GPU to be ignored by Ubuntu? Alternatively, has anyone got Unity working with a similar setup?

  Read the article

• Dell inspiron not finding Vodafone router

  - by Jeggy

  I have a "Dell inspiron 1564" and ubuntu doesn't find my friends router it works great at home, he has a vodafone router jeggy@jeggy-XPS:~$ sudo lshw -C network *-network description: Wireless interface product: BCM4312 802.11b/g LP-PHY vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:04:00.0 logical name: eth1 version: 01 serial: 78:e4:00:2a:d1:eb width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=wl0 driverversion=5.100.82.38 latency=0 multicast=yes wireless=IEEE 802.11bg resources: irq:17 memory:f0200000-f0203fff *-network description: Ethernet interface product: RTL8101E/RTL8102E PCI Express Fast Ethernet controller vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:05:00.0 logical name: eth0 version: 02 serial: b8:ac:6f:67:32:52 size: 10Mbit/s capacity: 100Mbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress msix vpd bus_master cap_list rom ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=half firmware=N/A latency=0 link=no multicast=yes port=MII speed=10Mbit/s resources: irq:42 ioport:3000(size=256) memory:f0410000-f0410fff memory:f0400000-f040ffff memory:f0420000-f043ffff *-network description: Ethernet interface physical id: 4 logical name: ham0 serial: 7a:79:05:ff:3e:ec size: 10Mbit/s capabilities: ethernet physical configuration: autonegotiation=off broadcast=yes driver=tun driverversion=1.6 duplex=full firmware=N/A ip=5.255.62.236 link=yes multicast=yes port=twisted pair speed=10Mbit/s

  Read the article

• How to get Wifi Working Properly - I am Noob

  - by user287853

  I'm a noob to Ubuntu, but not computers. I installed a full version of Ubuntu version 12 whatever it is. I run it on a machine that has Win7/Win8 on another hard drive. My wireless adapter is some tiny USB stick I got on eBay - it works great in Windows, but I can't get it to work in Ubuntu. More precisely, Ubuntu is providing me a list (sometimes) of wireless networks in the area and when I try to connect to mine it just keeps password prompting me even though the one I use is correct. I looked over all the settings multiple times and don't believe there is anything in error regarding what it takes to connect to my network. So, I thought maybe it is a driver issue and came across NDIS. I thought I should try installing it, but I don't know how when I can't connect the Ubuntu machine to the Internet. I tried some commands to no avail. I have the Ubuntu installation disc and it shows a NDIS common and utils .deb files in there. Can someone out there help me out to get this wireless setup so I can get online?

  Read the article

• Just installed 13.10 and everything is fine except I cannot connect to the internet. Any thoughts?

  - by razorccatu

  I just installed Ubuntu 13.10 on my HP G62 laptop and the install went smoothly. I did the install off of a USB drive after trying ubuntu. While I was testing it, I connected to my Wireless with out issue and surfed a little. After the install, no wireless. I can still connect to my wireless network (at least it tells me I'm connected at full strength) but No servers can be found. I attempted to ping Google to no avail and I attempted to ping my router to no avail. I tried to then hard wire the machine and once again it told me that I was connected but I was not. When I ran dmesg, I got the following message: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolvabe. Please install nss-hostname! Is the hostname the issue? if so, how do I resolve it with out internet connection? If it's not the issue, how do I move forward? Thanks for any help. EDIT. I forgot to attach the image of my ifconfig if that might help.

  Read the article

< Previous Page | 61 62 63 64 65 66 67 68 69 70 71 72  | Next Page >