Search Results

Search found 42616 results on 1705 pages for 'metro start screen'.

Page 65/1705 | < Previous Page | 61 62 63 64 65 66 67 68 69 70 71 72  | Next Page >

• Supertuxkart not able to start

  - by subeh.sharma

  Was working fine before i played around with NVIDIA drivers and ended up with this problem. I tried running it through the terminal and i see these messages: subsharm@subsharm-ThinkPad-T61:~$ supertuxkart Irrlicht Engine version 1.7.2 Linux 3.0.0-15-generic #25-Ubuntu SMP Mon Jan 2 17:44:42 UTC 2012 x86_64 [FileManager] Data files will be fetched from: '/usr/share/games/supertuxkart/' [IrrDriver] Creating NULL device Irrlicht Engine version 1.7.2 Linux 3.0.0-15-generic #25-Ubuntu SMP Mon Jan 2 17:44:42 UTC 2012 x86_64 [IrrDriver] Trying OpenGL rendering. [IrrDriver] Tring to create device with 32 bits Xlib: extension "GLX" missing on display ":0.0". [IrrDriver Temp Logger] Level 1: No GLX support available. OpenGL driver will not work. [IrrDriver Temp Logger] Level 2: Fatal error, could not get visual. Segmentation fault subsharm@subsharm-ThinkPad-T61:~$ sudo Xorg -configure [sudo] password for subsharm: Fatal server error: Server is already active for display 0 If this server is no longer running, remove /tmp/.X0-lock and start again.

  Read the article

• Stuck on EULA screen when installing netflix-desktop

  - by Jim

  I am trying to install netflix-desktop on my laptop running 13.10. I followed the instructions here: sudo apt-add-repository ppa:ehoover/compolio sudo apt-get update sudo apt-get install netflix-destop After a while, there is a EULA in my xterm that says I must agree to it to get the software. At the bottom of the screen there is ' I have hit , 'A', , typed 'OK' in that xterm but it never gets past that. The application is not available because if I try to launch netflix-desktop in another xterm, it doesn't know what I'm talking about and netflix isn't found on my system when I search search. Can anybody tell me what I'm supposed to do next or what I should have done so that I'm not in this situation next time? Thanks! Solution: I found out that I had to hit the down arrow several times till the lit up. Then I could hit to go to the next step. Then by using the arrow keys to highlight the proper respose(s), I was able to complete the installation. I haven't actually brought up Netflix yet, but it appears to be installing things as expected.

  Read the article

• Making a 2D game with responsive resolution

  - by alexandervrs

  I am making a 2D game, however I wish for it to be resolution agnostic. My target resolution i.e. where things look as intended is 1600 x 900. My ideas are: Make the HUD stay fixed to the sides no matter what resolution, use different size for HUD graphics under a certain resolution and another under a certain large one. Use large HD PNG sprites/backgrounds which are a power of 2, so they scale nicely. No vectors. Use the player's native resolution. Scale the game area (not the HUD) to fit (resulting zooming in some and cropping the game area sides if necessary for widescreen, no stretch), but always fill the screen. Have a min and max resolution limit for small and very large displays where you will just change the resolution(?) or scale up/down to fit. What I am a bit confused though is what math formula I would use to scale the game area correctly based on the resolution no matter the aspect ratio, fully fit in a square screen and with some clip to the sides for widescreen. Pseudocode would help as well. :)

  Read the article

• Screen Resolution stuck at 640x480 after installing Bumblebee

  - by Saurabh Agarwal

  I have a Dell XPS 15z laptop. As you can see here, there are some issues with NVidia drivers. The site recommends installation of Bumblebee (instructions given in the link). I am posting it again for ease: $ sudo add-apt-repository ppa:bumblebee/stable $ sudo apt-get update && sudo apt-get upgrade $ sudo apt-get install bumblebee bumblebee-nvidia $ sudo usermod -a -G bumblebee $USER After restarting the computer however, the screen resolution was stuck at 640x480 and I got the following error message as soon as I logged in: **Could not apply the stored configuration for monitors** none of the selected modes were compatible with the possible modes: Trying modes for CRTC 63 CRTC 63: trying mode 640x480@60Hz with output at 1366x768@60Hz (pass 0) CRTC 63: trying mode 640x480@60Hz with output at 1366x768@60Hz (pass 1) Trying modes for CRTC 64 CRTC 64: trying mode 640x480@60Hz with output at 1366x768@60Hz (pass 0) CRTC 64: trying mode 640x480@60Hz with output at 1366x768@60Hz (pass 1) Prior to the update, the display was absolutely normal and thus there is no doubt about the cause. Albeit, there was no support for graphic drivers. In case it helps, some features of graphics drivers seem to be functional after bumblebee, ie, all features are in order except for the resolution. And if the resolution can't be fixed, please suggest a way to retract the changes so that atleast the prior state may be reachieved. Any help in the matter would be highly appreciated.

  Read the article

• Technique to have screen independent grid based puzzle with sprite animation

  - by Yan Cheng CHEOK

  Hello all, let's say I have a fixed size grid puzzle game (8 x 10). I will be using sprites animation, when the "pieces" in the puzzle is moving from one grid to another grid. I was wondering, what is the technique to have this game being implemented as screen resolution independent. Here is what I plan to do. 1) The data structure coordinate will be represented using double, with 1.0 as max value. // Puzzle grid of 8 x 10 Environment { double width = 0.8; double height = 1.0; } // Location of Sprite at coordinate (1, 1) Sprite { double posX = 0.1; double posY = 0.1; double width = 0.1; double height = 0.1; } // scale = PYSICAL_SCREEN_SIZE drawBitmap ( sprite_image, sprite_image_rect, new Rect(sprite.posX * Scale, sprite.posY * Scale, (sprite.posX + sprite.width) * Scale, (sprite.posY + sprite.Height) * Scale), paint ); 2) A large size sprite image will be used (128x128). As sprite image shall look fine if we scale from large size down to small size, but not vice versa. Besides the above mentioned technique, is there any other consideration I had missed out?

  Read the article

• Should I start learning WPF?

  - by questron

  Hi, I've been studying C# for about 2 months so far, I have a few years experience programming however in VBA and VB6, but nothing too in depth (I've written simple tools, but nothing too advanced). I am very interested in WPF and I was wondering whether it would be too early for me to start learning how to use it? For reference, I am about 400 pages into 'Head First C#' and I've written a program that can quickly tag image files for moving into a predefined folder or to delete (Allows the user to pull images off of a camera memory card and sort VERY quickly). That's the most advanced app I've written.

  Read the article

• website development, where to start from [closed]

  - by hopefulLLl

  hello everyone.. i am a computer science student,and i know C language. i want to learn making websites but dont know how to go about it. i did learn some HTML, and right now learning CSS from www.w3schools.com . now can anyone tell me what shall i learn next and what all things[languages] i need to learn to start making websites. also refer to the study material if u can. thanks. also, how long will it take me to make some nice websites?

  Read the article

• How to start contributing to Unity?

  - by Mad-scientist

  I just forked the source code of Unity. I am new to contributing to the project. Do unity developers use any specific IDE? I am asking this because I am confused about where to start and how exactly do I check a change after I do it? Should I recompile entire natty? If so, then how? I know I am asking a lot of questions, but it would be really helpful if someone could write some kind of beginner friendly introduction to unity development.

  Read the article

• How to start competitive programming?

  - by Vaibhav Agarwal

  I am practicing coding for a while but the problem is that it takes me a lot of time to write a solution for the problems. I want to ask if competitive programming can help me in improving this? If yes, then how should I start and from what site like TopCoder? I would obviously won't be able to solve very hard problems for now. What should I do? If no, what else should I do? I also have another problem that I want to learn coding but the thing is that I feel that I am not very good at it. What should I do? It's like bugging me from inside. I know some people may not find this question informative but please at least allow me to get an answer.

  Read the article

• Creating user UI using Flixel

  - by Jamie Read

  I am new to game development but familiar with programming languages. I have started using Flixel and have a working Breakout game with score and lives. What I am trying to do is add a Start Screen before actually loading the game. I have a create function that adds all the game elements to the stage: override public function create():void // all game elements { How can I add this pre-load Start Screen? I'm not sure if I have to add in the code to this create function or somewhere else and what code to actually add. Eventually I would also like to add saving, loading, options and upgrades too. So any advice with that would be great. Here is my main game.as: package { import org.flixel.*; public class Game extends FlxGame { private const resolution:FlxPoint = new FlxPoint(640, 480); private const zoom:uint = 2; private const fps:uint = 60; public function Game() { super(resolution.x / zoom, resolution.y / zoom, PlayState, zoom); FlxG.flashFramerate = fps; } } } Thanks.

  Read the article

• ubuntu box just redisplaying login screen after update

  - by David M. Karr

  My Ubuntu 12.04 box has been working fine. A recent update may have messed something up. I normally run remote windows on it, and I noticed that my windows were failing to start up. I then tried logging into it directly from the GUI console, and I'm seeing that after I press enter on the (valid) password, the page just redisplays. It's not a password error, as that would give me an inline error. I see some messages appear and disappear quickly between the login screen going away and then redisplaying, but they go away too quickly to read. I was able to run the non-gui login, and I did an update and upgrade, and then rebooted, but it's doing the same thing. I have a Samba connection from my Windows box, and that's still working. If it matters, here's my uname output (somewhat elided): Linux ... 3.2.0-26-generic #41-Ubuntu SMP Thu Jun 14 17:49:24 UTC 2012 x86_64 x86_64 x86_64 GNU/Linux What can I do to troubleshoot this? Note that when I select "Guest Session", it lets me log in and displays the window manager. This seems significant to me. Does this mean that something specific to my login is causing it to fail? Note: If it matters, here's the output from /var/log/dmesg. The line about gdm seems interesting: [ 9.815883] Bluetooth: RFCOMM TTY layer initialized [ 9.815887] Bluetooth: RFCOMM socket layer initialized [ 9.815888] Bluetooth: RFCOMM ver 1.11 [ 9.879088] [PCSPP,TRISTATE] [ 9.879092] parport0: irq 7 detected [ 9.883935] type=1400 audit(1341871177.871:10): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=845 comm="apparmor_parser" [ 9.884365] type=1400 audit(1341871177.871:11): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/ntpd" pid=851 comm="apparmor_parser" [ 9.950397] e1000e 0000:00:19.0: irq 42 for MSI/MSI-X [ 9.961160] init: gdm main process (907) killed by TERM signal [ 9.966358] lp0: using parport0 (polling).

  Read the article

• Games installed from repos won't start

  - by Shauna

  I'm running Natty (upgraded from Maverick) with Gnome 3 (from the Gnome 3 PPA, Unity removed), and have recently found that some of my games from the repos no longer work. When I go to start them, I get the message Failed to launch [app name]. Failed to execute child process [app name] (no such file or directory). I've so far found this on Gweled and PyScrabble. Other games (Mines, Sudoku, Mahjongg), as well as other applications have opened just fine. Gweled used to open fine until recently. Any ideas on how to fix this?

  Read the article

• Ubuntu 12.04 freezes when booting

  - by Agustín González

  Translated I installed Ubuntu 12.04 LTS from the LiveCD, after finalizing the installation process and booting correctly, I applied the pending updates, which asked me to reboot. After rebooting, an error appeared saying "Out of Range". I pressed CTRL+ALT+F1, login to the tty1 terminal and edit the xorg.conf file and add VertRefresh 50.0 - 60.0 to it, which would solve the "Out of Range" problem that was mentioned before. After applying the changed and rebooting again, the following boot screen is all I see now: It freezes there. I even waited 2 hours and nothing happened. Can anybody help? Thank you! Original Instale Ubuntu 12.04 LTS desde el Live CD, al finalizar la instalación inicio el sistema operativo e inicia correctamente, después de aplicar actualizaciones me solicita reiniciar en lo cual acepto. Al volver a iniciar me daba un erro de "Fuera de rango", aprieto CTRL + ALT + F1, me logueo y edito el archivo xorg.conf en la sección Screen y agrego "VertRefresh 50.0 - 60.0", lo cual solucionaría el problema de "Fuera de rango", al aplicar los cambios, vuelvo a iniciar y solamente me aparece la pantalla de inicio (Véase imagen: http://t.bb/fH) y queda colgado, lo deje por lo menos 2 horas así y nada sucedió. ¿Alguien puede ayudarme? Gracias!

  Read the article

• How do I start Ubuntu without X server?

  - by Kaare Mikkelsen

  So, I'm trying to install the official nVidia drivers for my fancy graphics card, and they advice disabling the X server before installing, as well as making sure that I can boot without the X server, so as not to wreck anything. However, I seem to be doing something wrong. As I understand it, this should be as simple as changing the runlevel from 2 to 1? (I am aware that all this may simply be me not understanding runlevels) If that is correct, a quick test should be simply typing "sudo init 1" or "sudo telinit 1" in a terminal? Doing that makes the system attempt to shutdown, only it stops at the purple screen with the ubuntu logo and 5 white dots underneath. I haven't observed it get anywhere from there, I always end up holding down the power button. "sudo telinit 3" has not visible effect. Alternatively, I should be able to get there using the recovery mode, activated through the grub menu? I have very little success with that. After picking recovery mode, I am faced with a set of options about how to proceed. Both choosing the one with "network enabled" and "text only", I get a dialog explaining that this will mount my / file system in read/write mode, and whether this is what I want. I choose yes, and it seems to report that my drive is fine (there's a single line of text detailing the state of the partition). And then it stops. I haven't tried letting it sit for more than a few minutes, but presumably this process should be comparable in duration to a regular boot? I am not particularly fond of messing with any .conf-files until I am certain that I can handle things with training wheels on. So, I guess there are two questions: the one in the title, and "how do I start a text-only session without changing defaults?" Thanks in advance :)

  Read the article

• Unable to start Server Service on remote machine (2 replies)

  hi, i am trying to start Server service thru .net code on remote machine but unable to do so. here is the code.. ConnectionOptions con new ConnectionOptions(); con.Authority &quot;ntlmdomain:DomainName&quot;; con.Username &quot;x&quot;; con.Password &quot;123456&quot;; con.Impersonation ImpersonationLevel.Impersonate; con.Authentication AuthenticationLevel.Packet; con.EnablePrivileges true; ManagementScope ms new ManagementSco...

  Read the article

• GTK applications do not start

  - by Greg

  Hello, I have a fresh install of Ubuntu 10.04 Server on nodes of a computational cluster, and I access the nodes via ssh. I configured a X server, which I start with the command startx -- -ac. The server is running fine on port :0. Then, I set the environment variable DISPLAY to :0. Now, when I run a GTK application on the node, it fails with the following error: Error: Unable to initialize gtk, is DISPLAY set properly? Now, my question is, is there any runtime library that I need for running GTK applications on top of a X server? I'm probably missing something obvious here, but I can't tell what :P

  Read the article

• Making a game with responsive resolution

  - by alexandervrs

  I am making a game, however I wish for it to be resolution agnostic. My target resolution i.e. where things look as intended is 1600 x 900. My ideas are: Make the HUD stay fixed to the sides no matter what resolution, use different size for HUD graphics under a certain resolution and another under a certain large one. Use large HD sprites/backgrounds which are a power of 2, so they scale nicely. Use the player's native resolution. Scale the game area (not the HUD) to fit (resulting zooming in some and cropping the game area sides if necessary for widescreen, no stretch), but always fill the screen. Have a min and max resolution limit for small and very large displays where you will just change the resolution(?) or scale up/down to fit. What I am a bit confused though is what math formula I would use to scale the game area correctly based on the resolution no matter the aspect ratio, fully fit in a square screen and with some clip to the sides for widescreen. Pseudocode would help as well. :)

  Read the article

• Set a specific screen resolution with xrandr

  - by dierre

  So I installed LUbuntu 11.04 on my VirtualBox. I couldn't find the 1366x768 resolution so I installed Guest Additions but it wasn't there. So I used this code to set the correct resolution: gtf 1366 768 60 xrandr --newmode "1368x768_60.00" 85.86 1368 1440 1584 1800 768 769 772 795 $ xrandr --addmode VBOX0 1368x768_60.00 xrandr --output VBOX0 --mode 1368x768_60.00 The problem is that I can't find a way to save this information for the next reboot. I tried on .xinitrc and nothing happens. Then I tried on .bashrc but it's not working, I need to start a console before this commands are executed.

  Read the article

• Where to start learning OpenGL with C++?

  - by NERDcustard

  I'm 16 years old and my name is Norbert. I have learnt C++ and made some cool text based games and such but I would love to start graphic's programming. I'm a decent artiest (I will have some of my work bellow) I know the base of C++ but I really would like to get into OpenGL. I need someone to show me some good tutorials for OpenGl with C++ so I can really get into game dev. My goal is to be able to program a simple 2d game by the end of the year and I have lots of time to do so. I'm en-rolled in a game dev next year and really need some help with starting off. http://imgur.com/QZjKX http://imgur.com/3CZy7

  Read the article

• How to install nvidia drivers (GT 440 ) on Xubuntu 12.10 , screen res gone to 640x480 :(

  - by shaggyjack

  Hi all after days of endless googling I finally gave in and decided to try and directly ask for help. I have just installed Xubuntu and updated to 12.10 on a pretty old (12 years) machine, and I am now struggling to install the correct drivers for the nvidia 440 gt card.. I have managed to get "additional drivers" but the app does not show in the menu, I went through a few procedures which ended up in my screen going no higher than 640x480, and tried all the sudo apt-get variations with nvidia-current and current updates... I think I got the right version of the drivers ( 93.43.07 ) but they won't install from terminal as they say I am running an X server. So I learnt how to shut the graphic interface but then I try and install them from there but after I write the exact same command (sudo home/username/Downloads/NVIDIA-Linux-x86-96.43.07.pkg1.run ) nothing happens and the terminal says something like command not found. I am desperate for help if anybody could point me in the right direction that would be greatly appreciated. There are lots of similar topics on installing nvidia drivers but I seem to understand that current drivers are no good for my old GPU. So if anybody could show me how to install the right version that would be excellent. Thanks in advance! Jack

  Read the article

• Multiple monitors showing same screen but different resolutions

  - by Luis Alvarado

  Is it possible to have 2 or more monitors showing the same screen, for example the same desktop but with different resolutions. Like the clone option in Nvidia or the mirror option using the Display settings in Ubuntu but instead of showing the same output with the same resolution, the both show the same output using a resolution that is native for each monitor connected. In my case if I have a netbook that has max resolution of 1360x768 and a TV that has 1280x1024, the would both show the same desktop but each with their own resolution that is compatible for each device. This would help in trying to find a resolution that works on both monitors and in cases like a mini netbook and a huge TV it would solve issues like having max 800x600 in one monitor and min 1024x768 in the other. In the case I tested I was using an HDMI cable but this question also involves VGA and any other connection. I have 3 tests scenarios for this: Scenario 1 - Laptop HP DV6000 (Intel Integrated Video) with 1360x760 connected to a Samsung LED 42 TV that has 1280x900. Scenario 2 - Laptop EEE with 1024x600 (Intel Integrated Video) connected to Sony LCD TV that supports 1280x900. Scenario 3 - Intel Desktop with Nvidia 440 GT with HDMI connected to Soneview 32' TV that supports 1920x1080 and VGA connected to an Epson Video Beam that supports 1280x1024 max. In this 3 scenarios I need to be able to show the same desktop and same views but on different resolutions for each output device. UPDATE: Tested with Xubuntu and the way it handles multiple monitors is precisely what I am asking. The ability to handle the resolution of different monitors showing the same thing.

  Read the article

• i am going to start learning to develop games, and have a very importent question

  - by levi s.

  so i am going to be starting to start learning to develop games soon, and i have already learned the basics of java. before i really go balls out. am i making a bad choice of language? should i stop now and move to c++ or c#? will that hinder me? is java going to hinder me worse? im kinda having regrets on saying "oh hey minecraft was made in java, it must be best!" im mainly asking, what should i do?

  Read the article

• Ugly Boot Screen after upgrading to 12.10

  - by Sir Linuxalot

  Is there a way to change the ugly boot screen in 12.10? It seems to have rolled back to that 8-bit blocky looking thing with tiny orange dots underneath. It then breaks into process code under that, and it looks ghastly. I've read some tutorials on getting Plymouth to do some neat things, but they were for older versions of Ubuntu. I'm running a GeForce GTX 460 if that matters. Any help would be appreciated. Update: I've noticed/found a couple of things. The upgrade on my laptop didn't do this. It still uses the "normal" Ubuntu boot logo (using Plymouth, I assume). So, something is off with my desktop. And, I found and installed Super Boot Manager to see if that would help. With that, I enabled Plymouth and added a new theme, but the machine still boots with the block-ugly logo. Finally, I messed around with Grub on boot and added "nomodeset" after "quiet splash" and added it while deleting "quiet splash." None of these solutions worked. I'll keep hunting...

  Read the article

• Where to start? (3D Modeling)

  - by herfus

  I'm looking for a good resource to start learning 3d modeling. I'm looking for something that starts with the basics (e.g. terminology; what are quads, triangles etc.) before/while going into the actual modeling. Book, website, video, anything will do. I'm only concerned with the quality of the tutorials, how thorough they are. I have experience with texturing, level design and so on - but I've never created anything more than simple shapes/editing existing assets.

  Read the article

• Your Most Popular Sites Screen in IE 10 - Icons not appearing

  - by MJWadmin

  We use the following code to add icons for favicon, tablets, smartphones, windows 8 tiles and the like:- <link rel="apple-touch-icon" href="apple-touch-icon.png"> <link rel="shortcut icon" type="image/x-icon" href="/favicon.ico"/> <link rel="apple-touch-icon-precomposed" sizes="144x144" href="apple-touch-icon-144x144-precomposed.png"> <link rel="apple-touch-icon-precomposed" sizes="114x114" href="apple-touch-icon-114x114-precomposed.png"> <link rel="apple-touch-icon-precomposed" sizes="72x72" href="apple-touch-icon-72x72-precomposed.png"> <link rel="apple-touch-icon-precomposed" href="apple-touch-icon-precomposed.png"> <meta name="msapplication-TileImage" content="apple-touch-icon-144x144-precomposed.png"/> <meta name="msapplication-TileColor" content="#17151a"/> Unfortunately this doesn't seem to work for IE9 and IE10's 'your most popular sites screen', google searches have been un-enlightening. Stack uses <link rel="apple-touch-icon" href="apple-touch-icon.png"> which seems to work for it, but not for us. Any clues to a solution appreciated.

  Read the article

< Previous Page | 61 62 63 64 65 66 67 68 69 70 71 72  | Next Page >