Search Results

Search found 6817 results on 273 pages for 'music production'.

Page 65/273 | < Previous Page | 61 62 63 64 65 66 67 68 69 70 71 72  | Next Page >

  • What's wrong with my VirtualHost?

    - by johnlai2004
    I have the following VirtualHost // filename: /etc/apache2/sites-available/ccbbbcc <VirtualHost 1.1.1.1:80> ServerAdmin [email protected] ServerName ccbbbcc.com ServerAlias www.ccbbbcc.com DocumentRoot /srv/www/ccbbbcc/production/public_html/ ErrorLog /srv/www/ccbbbcc/production/logs/error.log CustomLog /srv/www/ccbbbcc/production/logs/access.log combined </VirtualHost> And then I also have //filename: /etc/apache2/sites-available/default <VirtualHost 1.1.1.1:80> ServerAdmin webmaster@localhost DocumentRoot /var/www/ <Directory /> Options FollowSymLinks AllowOverride None </Directory> blah blah blah How come when I type into my browser http://1.1.1.1, it takes me to http://ccbbbcc.com ? Even when I point new urls to the IP 1.1.1.1, webpages serve from http://ccbbbcc.com. Why is the ccbbbcc.com overriding all my other virtual hosts? Why am I unable to serve pages from /var/www directory? I've made sure to use a2ensite and to restart apache. This is what my /etc/apache2/ports.conf looks like NameVirtualHost 1.1.1.1:80 Listen 80 Listen 443

    Read the article

  • Mongrel Cluster on Ubuntu Server Karmic

    - by trobrock
    I am trying to get mongrel cluster working on my Ubuntu Server Karmic box in preparation to setup Capistrano. I've been trying to get the two to work all day and finally decided to completely remove Capistrano and see if I can just get Mongrel Cluster to work. I ran this to install mongrel cluster: gem install mongrel mongrel_cluster Everything installed fine, when I change into my app's directory... # mongrel_rails -bash: mongrel_rails: command not found I can run it from its install location: # /var/lib/gems/1.8/bin/mongrel_rails Usage: mongrel_rails <command> [options] Available commands are: ... It lets me build the cluster configuration file fine, but when I run the clister:start command: # /var/lib/gems/1.8/bin/mongrel_rails cluster::start starting port 8000 /usr/lib/ruby/1.8/rubygems/custom_require.rb:31: command not found: mongrel_rails start -d -e production -p 8000 -P tmp/pids/mongrel.8000.pid -l log/mongrel.8000.log starting port 8001 /usr/lib/ruby/1.8/rubygems/custom_require.rb:31: command not found: mongrel_rails start -d -e production -p 8001 -P tmp/pids/mongrel.8001.pid -l log/mongrel.8001.log starting port 8002 /usr/lib/ruby/1.8/rubygems/custom_require.rb:31: command not found: mongrel_rails start -d -e production -p 8002 -P tmp/pids/mongrel.8002.pid -l log/mongrel.8002.log It seems it isnt calling it from the right directory after that command, what can I do to fix this? I tried setting the path previously when trying to set up Capistrano, but the path didnt stay set when Capistrano used ssh to run the commands.

    Read the article

  • I want to add a Quality Assurance domain. How do I handle DNS servers?

    - by Tim
    I'm advising a large client on how to isolate their dev and testing from their production. They already have one domain, lets say xyz.net with the active directory domain as "XYZ01". I want to add second domain say QAxyz.net and make its active directory domain "QA01" All development and QA servers would be moved to the QAxyz.net domain, the machines would be part of the QA01 domain. Note: Some of these servers will have the same name as the production servers for testing purposes. I believe we would have separate DNS servers for each domain. If I am logged into the QA01 domain, to access the production domain I would qualify my access like so: \PRODSERVER.xyz.net login: XYZ01\username Do I need to add a forwarder to my QAxyz.net DNS server so that it can see xyz.net? Would I need to do the same to the xyz.net DNS server to see QAxyz.net? I don't know how to advise them in this. Does anyone have any other recommendations to isolationg a QA domain? Many Thanks in advance! Tim

    Read the article

  • One Apache VirtualHost entry overrides another?

    - by johnlai2004
    I can't tell why one apache virtual host entry keeps overriding another. The following file // filename: cbl <VirtualHost 74.207.237.23:80> ServerAdmin [email protected] ServerName completebeautylist.com ServerAlias www.completebeautylist.com DocumentRoot /srv/www/cbl/production/public_html/ ErrorLog /srv/www/cbl/production/logs/error.log CustomLog /srv/www/cbl/production/logs/access.log combined </VirtualHost> keeps overriding this file // filename: theccco.org <VirtualHost 74.207.237.23:80> SuexecUserGroup "#1010" "#1010" ServerName theccco.org ServerAlias www.theccco.org ServerAlias webmail.theccco.org ServerAlias admin.theccco.org DocumentRoot /home/theccco/public_html ErrorLog /var/log/virtualmin/theccco.org_error_log CustomLog /var/log/virtualmin/theccco.org_access_log combined ScriptAlias /cgi-bin/ /home/theccco/cgi-bin/ DirectoryIndex index.html index.htm index.php index.php4 index.php5 <Directory /home/theccco/public_html> Options -Indexes +IncludesNOEXEC +FollowSymLinks allow from all AllowOverride All </Directory> <Directory /home/theccco/cgi-bin> allow from all </Directory> RewriteEngine on RewriteCond %{HTTP_HOST} =webmail.theccco.org RewriteRule ^(.*) https://theccco.org:20000/ [R] RewriteCond %{HTTP_HOST} =admin.theccco.org RewriteRule ^(.*) https://theccco.org:10000/ [R] Alias /dav /home/theccco/public_html <Location /dav> DAV On AuthType Basic AuthName theccco.org AuthUserFile /home/theccco/etc/dav.digest.passwd Require valid-user ForceType text/plain Satisfy All RewriteEngine off </Location> </VirtualHost> I tried a2ensite, a2dissite, and reloading I get this message * Reloading web server config apache2 apache2: Could not reliably determine the server's fully qualified domain name, using 127.0.1.1 for ServerName [Thu Apr 15 10:47:36 2010] [warn] NameVirtualHost 74.207.237.23:443 has no VirtualHosts Aside from that, I don't know what else could be wrong. Can anyone tell me what to do?

    Read the article

  • starting oracle 10g on ubuntu, Listener failed to start.

    - by tsegay
    I have installed oracle 10g on a ubuntu 10.x, This is my first time installation. After installing I tried to start it with the command below. tsegay@server-name:/u01/app/oracle/product/10.2.0/db_1/bin$ lsnrctl LSNRCTL for Linux: Version 10.2.0.1.0 - Production on 29-DEC-2010 22:46:51 Copyright (c) 1991, 2005, Oracle. All rights reserved. Welcome to LSNRCTL, type "help" for information. LSNRCTL> start Starting /u01/app/oracle/product/10.2.0/db_1/bin/tnslsnr: please wait... TNSLSNR for Linux: Version 10.2.0.1.0 - Production System parameter file is /u01/app/oracle/product/10.2.0/db_1/network/admin/listener.ora Log messages written to /u01/app/oracle/product/10.2.0/db_1/network/log/listener.log Error listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1))) TNS-12555: TNS:permission denied TNS-12560: TNS:protocol adapter error TNS-00525: Insufficient privilege for operation Linux Error: 1: Operation not permitted Listener failed to start. See the error message(s) above... my listener.ora file looks like this: # listener.ora Network Configuration File: /u01/app/oracle/product/10.2.0/db_1/network/admin/listener.ora # Generated by Oracle configuration tools. SID_LIST_LISTENER = (SID_LIST = (SID_DESC = (SID_NAME = PLSExtProc) (ORACLE_HOME = /u01/app/oracle/product/10.2.0/db_1) (PROGRAM = extproc) ) ) LISTENER = (DESCRIPTION_LIST = (DESCRIPTION = (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1)) (ADDRESS = (PROTOCOL = TCP)(HOST = acct-vmserver)(PORT = 1521)) ) ) I can guess the problem is with permission issue, But i dont know where I have to do the change on permission. Any help is appreciated ... EDIT## When i run with the command sudo, i got this tsegay@server-name:/u01/app/oracle/product/10.2.0/db_1$ sudo ./bin/lsnrctl start LSNRCTL for Linux: Version 10.2.0.1.0 - Production on 30-DEC-2010 01:01:03 Copyright (c) 1991, 2005, Oracle. All rights reserved. Starting ./bin/tnslsnr: please wait... ./bin/tnslsnr: error while loading shared libraries: libclntsh.so.10.1: cannot open shared object file: No such file or directory TNS-12547: TNS:lost contact TNS-12560: TNS:protocol adapter error TNS-00517: Lost contact Linux Error: 32: Broken pipe

    Read the article

  • Firefox will not remember local site cookie

    - by Campo
    This is a weird one. We have a production server (Server 2008) and two staging servers (Server 2008 and Server 2003) I have sites on all of these. They all use cookies. On the Production server when browsing to our site www.supernovainteractive.com there is a cookie that detects when you visted the site and it will not refresh the logo animation (top left hand side) on clicking to another page. This works for all browsers on the production server. I’m not sure what’s going on but for some reason cookies are not working on one site in the 2008 staging server only. This is when browsing using Firefox (3.6.3) they work fine on all other browsers (IE, Chrome, Safari, Opera) In addition, the 2003 staging server works fine. You can test on the Supernova Interactive site by noticing the logo in the top left corner. It uses a cookie to detect if you’ve already seen the animation. Once you’ve seen it once, it doesn’t animate again until tomorrow. Currently, it’s animating every time. I have opened an outside facing port so others can see the issue. Http://exchange.supernova.com:10009 Any ideas on this one? Firewalls are off on the server. Notice you do not get a cookie from Exchange.supernova.com.

    Read the article

  • SQL cluster instance names for large project

    - by Sam
    We're setting up two clusters. One dev and one prod. The Production will host two SQL instances - a OLTP and a DW. The development will host 4 OLTP non-production environments and at least one DW non-production. We're working on getting more DW non-prods and possibly more OLTP systems. I'm considering a naming scheme like this, where PROJ would be 3 initials for the project name. Dev Cluster MSSQLPROJD1\D1 (DEV) MSSQLPROJD2\D2 (TEST) MSSQLPROJD3\D3 (QA) MSSQLPROJD4\D4 (STAGE) MSSQLPROJD5\D5 (DW) Prd Cluster MSSQLPROJP1\P1 (PRD) MSSQLPROJP2\P2 (DW) To the left of the slash, each name must be unique network wide. On each server, the instance name, to the right of the slash, must be unique. Any thoughts on this? I'm trying to avoid having instance names drifting from reality as the project progresses - say we change what we call a certain environment or want to repurpose one. Then we can update a listing of the purposes for the instances and be done with it. How has a scheme like this worked out for you? Maybe you do things another way in your shop - tell me about it. Thanks.

    Read the article

  • Sane patch schedule for Windows 2003 cluster

    - by sixlettervariables
    We've got a cluster of 75 Win2k3 nodes at work in a coarse grained compute cluster. The cluster is behind a mountain of firewalls and resides in its own VLAN. Jobs of all sizes and types run on the cluster and all of the executables running are custom-made. (ed: additional notes on our executables) The jobs range from 30 seconds to 7 days in duration, and may contain one executable or 2000 sub-jobs (of short duration). Obviously we are trying to avoid the situation where our IT schedules a reboot during a 7 day production job. We have scheduling software which accomodates all of the normal tasks for a coarse grained cluster and we can control which machines are active for submission, etc. If WSUS was in some way scriptable (or the client could state it's availability for shutdown) we could coordinate the two systems and help out. Currently, the patch schedule is the Sunday after Super Tuesday regardless of what is running on the cluster. We have to ask for an exemption every time we want to delay patching a machine for a long running production job. Basically, while our group is responsible for the machines we have little control over IT's patch schedule. Is patching monthly with MS's schedule sane for a production Windows cluster? Are there software hooks in WSUS where we could say, "please don't reboot just yet"?

    Read the article

  • How can I create a VLAN on my extreme switch for a separate subnet/domain?

    - by drpcken
    I'm putting together a small active directory implementation for a buddy of mine. I currently have 2 servers (one is the primary domain controller) and a couple clients. I need to test and run updates on every machine on this domain, but I would have plug them into my current LIVE domain to get it internet access. From what I've read having two separate domains on a single subnet is a bad idea (even though it is temporary) so I don't want to risk messing anything up on my production domain. I'm pretty sure I can create a separate VLAN on my extreme 48 port switch and plug this smaller domain into it on a different subnet, but I don't know the commands. Both subnets would need internet access of course (one of the things I can't wrap my head around is routing internet traffic between subnets (gateway is on production subnet). Switch is a Summit x450e-48p My production domain is on subnet 192.168.200.0. My new domain I want to put online would go into subnet 192.168.10.0. A shove in the right direction would be greatly appreciated. Thank you!

    Read the article

  • How can I create a VLAN on my extreme switch for a seperate subnet/domain?

    - by drpcken
    I'm putting together a small active directory implementation for a buddy of mine. I currently have 2 servers (one is the primary domain controller) and a couple clients. I need to test and run updates on every machine on this domain, but I would have plug them into my current LIVE domain to get it internet access. From what I've read having two separate domains on a single subnet is a bad idea (even though it is temporary) so I don't want to risk messing anything up on my production domain. I'm pretty sure I can create a separate VLAN on my extreme 48 port switch and plug this smaller domain into it on a different subnet, but I don't know the commands. Both subnets would need internet access of course (one of the things I can't wrap my head around is routing internet traffic between subnets (gateway is on production subnet). My production domain is on subnet 192.168.200.0. My new domain I want to put online would go into subnet 192.168.10.0. A shove in the right direction would be greatly appreciated. Thank you!

    Read the article

  • Offloading backups to secondary network

    - by user1467163
    I'm trying to solve a problem- Currently, we are constantly backing up and have no budget for additional servers. Our production network is still a 10/100 and handles voip, SQL plus our backup traffic, and I'd like to offload the backup traffic onto a secondary network- all of our servers have secondary NIC's that are not in use, and all support gigabit (Our switching hardware does not- a topic for another day). I'd like to move my backups off the production network, but I am having a hard time getting the computers to communicate. I am using a Netgear GS724T switch for the backup network- Chosen for cost and because I have used them extensively on networks saturated with ghosting traffic, so I know it's up to the task. I have defined a VLAN, with ports that are not members of any other VLAN. All traffic is untagged on the VLAN. I have set the servers with 192.168.1.10 and 192.168.1.11 addresses, 255.255.255.0 netmask and I have tried a blank GW, using the local IP of the server 192.168.1.whatever address, and I have tried using the switch's production-side IP as the GW. The machines cannot find each other. DNS addresses are blank because I am going purely by IP for now... Any ideas how to get these machines to talk? they are Windows machines, running Server 2008R2 and 2003R2. Thanks!

    Read the article

  • Migrating WebLogic 10.3.0 to new host. Slow managed server startup times

    - by wadevondoom
    We are migrating our Blue Martini Commerce application (only supported on WebLogic 10.3.0) to a new host (Redhat 6.3 on a VMWare ESX vm). We are seeing extremely slow start up times for our managed server(s) that is basically 20x slower than our current production. As a for instance the Publish managed server takes ~30 - 45 seconds in current production and in the new environment it takes ~10 minutes. The setup uses the same domain structure and JVM as the current production environment. The same setup files are used. We use jdk1.6.0_33 on 64 bit architecture. We used the generic 64bit weblogic installer and used pack / unpack utilities to migrate the domain. The JAVA_OPTS to start this server are: "-d64 -Xms256m -Xmx512m -XX:PermSize=48m -XX:MaxPermSize=256m" The sysadmins have checked /etc/sysctl.conf and /etc/limits.conf to ensure we were not hitting some kind of process limit. As I am not sure what this managed server does from a Blue Martini perspective during the phase of startup I also had the DBA check to ensure that Oracle RAC (11.2.0.3) wasn't also hitting some kind of process limit or if there was a tns listener issue. The new host is quite a bit stricter with their server lock downs so there are a few differences.... Redhat 6.3 in new env, RH 5.7 in current SElinux is targeted in new env and disabled in current VM in new env and dedicated hardware in current iptables disabled in current. It was enabled in new prod but I had them disable it just in case I apologize for not being more specific. I am mostly hoping got some tips. I do not have the typical root access I would normally have in this environment. I am just hoping got a path forward. I did a few 'kill -3' to see if there are blocked threads and I got nadda. The service works for all intents and purposes it is just painfully slow. Thanks you all in advance for reading and best regards. Wade

    Read the article

  • Firefox Does NOT get local site cookie

    - by Campo
    This is a weird one. We have a production server (Server 2008) and two staging servers (Server 2008 and Server 2003) I have sites on all of these. They all use cookies. On the Production server when browsing to our site www.supernovainteractive.com there is a cookie that detects when you visted the site and it will not refresh the logo animation (top left hand side) on clicking to another page. This works for all browsers on the production server. I’m not sure what’s going on but for some reason cookies are not working on one site in the 2008 staging server only. This is when browsing using Firefox (3.6.3) they work fine on all other browsers (IE, Chrome, Safari, Opera) In addition, the 2003 staging server works fine. You can test on the Supernova Interactive site by noticing the logo in the top left corner. It uses a cookie to detect if you’ve already seen the animation. Once you’ve seen it once, it doesn’t animate again until tomorrow. Currently, it’s animating every time. I have opened an outside facing port so others can see the issue. Http://exchange.supernova.com:10009 Any ideas on this one? Firewalls are off on the server. Notice you do not get a cookie from Exchange.supernova.com.

    Read the article

  • Bind9 not doing anything with forwarded query responses?

    - by Rykaro
    I have a Bind DNS server that is the local production DNS server and a Windows 2008 R2 domain controller which provides DNS for a lab environment with the domain xyz.lab. I've configured the Bind DNS to forward DNS requests for the domain xyz.lab to the Windows DNS server with this config: zone "xyz.lab" { type forward; forward only; forwarders { x.x.x.x; }; }; zone "x.x.x.in-addr.arpa" { type forward; forward only; forwarders { x.x.x.x; }; }; And Bind options are (the all_internal acl includes the subnets of both the production and lab networks as well as the loopback of the bind server): allow-query { all_internal; }; allow-recursion { all_internal; }; allow-transfer { none; }; notify no; minimal-responses yes; version "unknown"; Unfortunately, when I do an nslookup or dig on the bind server for a host on the lab domain, the request times out. The logs on the Windows 2008 DNS server show it receiving the query and responding to it and a network packet trace shows the query responses arriving at the Bind DNS server. The servers reside on the same switch with a router providing connectivity between the layer 3 subnets (production and lab are on different subnets) and there is a round trip time of between 3ms and 5ms on pings between the two servers, so I don't think there is an issue with latency causing a timeout of the query. In summary a query-response arrives back at the Bind server and the nslookup/dig times-out. Why does the Bind DNS not seem to be doing anything with the query responses when it receives them?

    Read the article

  • Deployment and monitoring tools for java/tomcat/linux environment

    - by Ran
    I'm a developer for many years, but don't have tons of experience in ops, so apology if this is a newbe question. In my company we run a web service written in Java mainly based on a Tomcat web server. We have two datacenters with about 10 hosts each. Hosts are of several types: Dababase, Tomcats, some offline java processes, memcached servers. All hosts are Linux CentOS Up until now, when releasing a new version to production we've been using a set of inhouse shell script that copy jars/wars and restart the tomcats. The company has gotten bigger so it has become more and more difficult operating all this and taking code from development, through QA, staging and to production. A typical release many times involves human errors that cost us precious uptime. Sometimes we need to revert to last known good and this isn't easy to say the least... We're looking for a tool, a framework, a solution that would provide the following: Supports the given list of technology (java, tomcat, linux etc) Provides easy deployment through different stages, including QA and production Provides configuration management. E.g. setting server properties (what's the connection URL of each host etc), server.xml or context configuration etc Monitoring. If we can get monitoring in the same package, that'll be nice. If not, then yet another tool we can use to monitor our servers. Preferably, open source with tons of documentation ;) Can anyone share their experience? Suggest a few tools? Thanks!

    Read the article

  • BIND9 Forwarding by view

    - by Triztian
    Hi I think this is a simple issue, I'd like to forward only to certain IPs in the LAN network, for example I have 2 acl lists: acl "office1" { 192.168.1.15; // With internet access }; acl "production" { 192.168.1.101; // No internet access }; I know that there probably should be more efficient ways to restrict internet access, but at the moment this is what I'd like to try.Here's what I've tried in named.conf.local // Inlcude my acl definitions include "/etc/bind/acls.conf"; view "no-internet" { match-clients { production; }; include "/etc/bind/named.conf.default-zones"; zone "localdomain.com" { type master; file "/etc/bind/db.localdomain.com"; }; zone "1.168.192.in-addr.arpa" { type master; file "/etc/bind/db.192.168.1"; }; } view "internet" { match-clients { office1; }; include "/etc/bind/named.conf.default-zones"; forwarders { 201.56.59.14; // Made Up 201.56.59.15; // Made Up }; zone "localdomain.com" { type master; file "/etc/bind/db.localdomain.com"; }; zone "1.168.192.in-addr.arpa" { type master; file "/etc/bind/db.192.168.1"; }; }; As you can see I want a localdomain.com defined for every computer in my network and forward internet access to the computers in the office but not to the ones on the production floor. I've modified my conf file, however the IP in the "no-internet" acl is able to resolve the domains, even though I've rebooted the computer, flushed the DNS using ipconfig /flushdns and set my DNS Server as the only one, why is this still happening? Thanks in advance.

    Read the article

  • How to push changes from Test server to Live server?

    - by anonymous
    As a beginner, I finally noticed the issue with making changes to the live server I've been working on, now that I have a couple users on it, since I bring it down so often. I created an EC2 image of my live server and set up a separate instance on EC2, so now I have 2 EC2 instances, Stage and Production. I set up GitHub and push changes to stage and test my code there, and when it's all done and working, I push it to the production branch, and everything is good. And there is a slight issue here since I name my files config_stage.js and config_production.js and set up .gitignore on each server, and in my code, I would have it read the ENV flags and set up the appropriate configs, is this the correct approach? And my main question is: how do you keep track of non-code changes to the server? For example, I installed HAProxy, Stunnel, Redis, MongoDB and several other things onto the Stage server for testing and now that it's all working and good, how do I deploy them to production? Right now, I'm just keeping track of everything I installed and copying configuration files over, which is very tedious and I'm afraid I may have missed a step somewhere. Is there a better way to port these changes over from my test server to my live server?

    Read the article

  • Where exactly should i add crossdomain.xml file?

    - by SpikETidE
    Hi everyone... i am trying to create a internet radio.... I use icecast2 for streaming..... edcast plugin with winamp to send the music to icecast... and the xspf web music player (http://musicplayer.sourceforge.net/) to connect the user to the icecast server and play the music.... The setup works great and i can broadcast and receive on the local network i use to test the radio.. using xampp... Now the icecast broadcasts online from a windows server with the ip address say xx.xx.xxx.xxx The webpage in which the flash player is embedded is uploaded to www.xyz.com/images/radio This domain has the same ip address from where the icecast server runs. Now when i run the webpage to connect to the radio with the flash player, i get the error in firebug as "xx.xx.xxx.xxx:8000/crossdomain.xml 404 NOT FOUND" But i have created a crossdomain.xml file in the root of the xx.xx.xxx.xxx server... Still it doesn't recognize the file... Can anyone tell me where exactly i should create the file for my setting...??? Thanks a lot in advance.....

    Read the article

  • How would the conversion of a custom CMS using a text-file-based database to Drupal be tackled?

    - by James Morris
    Just today I've started using Drupal for a site I'm designing/developing. For my own site http://jwm-art.net I wrote a user-unfriendly CMS in PHP. My brief experience with Drupal is making me want to convert from the CMS I wrote. A CMS whose sole method (other than comments) of automatically publishing content is by logging in via SSH and using NANO to create a plain text file in a format like so*: head<<END_HEAD title = Audio keywords= open,source,audio,sequencing,sampling,synthesis descr = Music, noise, and audio, created by James W. Morris. parent = home END_HEAD main<<END_MAIN text<<END_TEXT Digital music, noise, and audio made exclusively with @=xlink=http://www.linux-sound.org@:Linux Audio Software@_=@. END_TEXT image=gfb@--@;Accompanying image for penonpaper-c@right ilink=audio_2008 br= ilink=audio_2007 br= ilink=audio_2006 END_MAIN info=text<<END_TEXT I've been making PC based music since the early nineties - fortunately most of it only exists as tape recordings. END_TEXT ( http://jwm-art.net/dark.php?p=audio - There's just over 400 pages on there. ) *The jounal-entry form which takes some of the work out of it, has mysteriously broken. And it still required SSH access to copy the file to the main dat dir and to check I had actually remembered the format correctly and the code hadn't mis-formatted anything (which it always does). I don't want to drop all the old content (just some), but how much work would be involved in converting it, factoring into account I've been using Drupal for a day, have not written any PHP for a couple of years, and have zero knowledge of SQL? How might a team of developers tackle this? How do-able is it for one guy in his spare time?

    Read the article

  • Using kAudioSessionProperty_OtherMixableAudioShouldDuck on iPhone

    - by Cliff
    Hello, I'm trying to get consistant behavior out of the kAudioSessionProperty_OtherMixableAudioShouldDuck property on the iPhone to allow iPod music blending and I'm having trouble. At the start of my app I set an Ambient category like so: -(void) initialize { [[AVAudioSession sharedInstance] setCategory: AVAudioSessionCategoryAmbient error: nil]; } Later on when I attempt to play audio I set the duck property using the following method: //this will crossfade the audio with the ipod music - (void) toggleCrossfadeOn:(UInt32)onOff { //crossfade the ipod music AudioSessionSetProperty(kAudioSessionProperty_OtherMixableAudioShouldDuck,sizeof(onOff),&onOff); AudioSessionSetActive(onOff); } I call this passing a numeric "1" just before playing audio like so: [self toggleCrossfadeOn:1]; [player play]; I then call the crossfade method again passing a zero when my app's audio completes using a playback is stopping callback like so: -(void) playbackIsStoppingForPlayer:(MQAudioPlayer*)audioPlayer { NSLog(@"Releasing player"); [audioPlayer release]; [self toggleCrossfadeOn:0]; } In my production app this exact code works as expected, causing the ipod to fade out just before playing my app's audio then fade back in when the audio finishes playing. In a new project I recently started, I get different behavior. The iPod audio fades down and never fades back in. In my production app I use the AVAudioPlayer where in my new app I've written a custom audio player that uses audio queues. Could somebody help me understand the differences and how to properly use this API?

    Read the article

  • Show div on click — jquery

    - by Tom Julian Hume
    When a div is clicked, I want different div to appear. Thus, when '#music' is clicked, I want '#musicinfo' to appear. Here is the code: #music { float:left; height:25px; margin-left:25px; margin-top:25px; margin-right:80px; font-family: "p22-underground",sans-serif; font-style: normal; font-weight: 500; font-size:13pt; } #musicinfo { width:380px; margin:25px; font-family: "p22-underground",sans-serif; font-style: normal; font-weight: 500; font-size:13pt; line-height:1.1; display:none; } and jquery: <script type="text/javascript"> $("#music").click(function () { $("#musicinfo").show("slow"); }); </script> The current website is: here Any help whatsoever would be great :)

    Read the article

  • Internet Radio Station for University

    - by ryan
    I am trying to help my University Student Radio station rethink the setup of the way they stream music, but I have some questions regarding the use of Ubuntu to stream music. Currently, the radio station uses two windows machines: one of which is used to stream the radio station and serve the website, and the other is used by rotating djs to select songs and create playlists. The computer used by djs feeds mono into the sound card of the server and the server streams the feed online. -Ideally I would like to maintain a two-computer setup: One computer as server, and another that is used to select and play music by rotating djs. -I would like to use Ubuntu for the server. -I would like to use Windows for the other machine. -The server should be able to stream song information. First, is there a way to somehow get the song information from an analog feed? Second, what is the best streaming server for radio? I have encountered shoutcast, icecast, and darwin, but I don't know where to begin in attempting to gauge them. Finally, if anyone has any tips or pointers about small internet radio station management/ setup they would be appreciated as this is my first radio station, and I am eager to hear of past experiences.

    Read the article

  • how to use Remote Service ?

    - by LEE YONGGUN
    Hi im trying to use Remote Service btween two simple application, But its not easy to me. So any advice you have will help me. here`s my case. I made one app which is playing Music in service, There are two components. one is Activity controlling service by using three buttons, play,pause, stop. and it is working fine. and another one is just simple Activity which also has four buttons bind,play,stop,unbind. when i click bind, it`s confirmed by Toast msg, but when i click play button,it occurs error. i want to control first activitys Music playing service in second Activity. So im trying to use remote service. i made same .aidl file in each app project. In aidl file, i defined methods "playing","stoping" and i implement those methods in Music service class, implementation is simply use intent and startService & stopService. In DDMS there is "java.lang.SecurityException : Binder invocation to an incorrect interface" thats the case what im doing. So please tell me what`s the problem. any advice could help me. thanks Gun.

    Read the article

  • visualising piano performance evaluation

    - by Dolphin
    I need to develop a performance evaluator for piano playing. Based on a midi generated from sheet music, I need to evaluate the midi of the actual playing (midi keyboard). I'm planning to evaluate the playing based on note pitch, duration and loudness. The evaluation is I suppose a comparison of the notes of the sheet music and playing in midi. But I have no idea how I can visualise (i.e. show where the person have gone wrong) this evaluation process. i.e. maybe show both the notation and highlight which note has gone wrong. But how can I show any of this in some graphical form? Or more precisely on a stave (a music score) itself. I have note details (pitch, duration) and score details (key and time signature) stored in a table, and I'm using Java. But I have no clue as in how I can put all this into graphical form. Any insight is most gratefully appreciated. Advance thanks

    Read the article

  • Unsupported smapling rate in flex/actionscript

    - by Rajeev
    In action script i need Loading configuration file /opt/flex/frameworks/flex-config.xml t3.mxml(10): Error: unsupported sampling rate (24000Hz) [Embed(source="music.mp3")] t3.mxml(10): Error: Unable to transcode music.mp3. [Embed(source="music.mp3")] The code is <?xml version="1.0"?> <!-- embed/EmbedSound.mxml --> <mx:Application xmlns:mx="http://www.adobe.com/2006/mxml"> <mx:Script> <![CDATA[ import flash.media.*; [Embed(source="sample.mp3")] [Bindable] public var sndCls:Class; public var snd:Sound = new sndCls() as Sound; public var sndChannel:SoundChannel; public function playSound():void { sndChannel=snd.play(); } public function stopSound():void { sndChannel.stop(); } ]]> </mx:Script> <mx:HBox> <mx:Button label="play" click="playSound();"/> <mx:Button label="stop" click="stopSound();"/> </mx:HBox> </mx:Application>

    Read the article

< Previous Page | 61 62 63 64 65 66 67 68 69 70 71 72  | Next Page >