Search Results

Search found 24928 results on 998 pages for 'link tag'.

Page 658/998 | < Previous Page | 654 655 656 657 658 659 660 661 662 663 664 665  | Next Page >

• How to connect to my own WiFi using Broadcom STA drivers?

  - by Chris

  I'm trying hard to switch to Linux from Windows because of my engineering project. Unfortunately, everything is against that change! Before I have installed Broadcom STA proprietary drivers, I was seeing on NetworkManager and nm-applet only local radio-internet-access networks. After I installed Broadcom STA, I see my neighbor's wireless network (channel 11, WEP) Neither before nor after the installation is own wireless network available. Computer: Asus Lamborghini VX6 Ubuntu: 12.04 LTS 64-bit Router: ASUS N55U (A1) with newest AsusWRT firmware Network: Channel 5 (tried also 10 and 11, both on 20 and 40MHz bands), WPA2 Personal, 2,4 + 5 GHz (what is not very important, 'cause the wlan card in VX6 is only 2,4GHz). Network works fine on Windows, also through D-Link repeater on the other floor. Unfortunately, same network is invisible to Ubuntu on same machine. I have tried some combinations with other GUIs but it did not work. Are there any better drivers for Ubuntu? I need that network badly, but I'm an Ubuntu newbie, so I don't know how to solve that problem. Please help.

  Read the article

• Get the interface and ip address used to connect to a specific host (ip)

  - by umop

  I'm sure this has been asked and answered before, but I wasn't able to find it, so hopefully this will at least link someone to the right place. I want to find out my local interface and ip address used to reach a certain host. For instance, if I had 3 adapters connected to my box and they all three went to different networks, I'd like to know which of the three (specifically, its ip address) is used to reach my.local.intranet (in this case, it would be a vpn tunnel interface). I suspect this is a job for ifconfig or traceroute, but I haven't been able to find the correct switches. I'm running OSX 10.7 (Darwin) Thanks!

  Read the article

• Web/Cloud Based OS with Torrent Features and Free Storage?

  - by Kristina E

  Hi, I want a web-based OS with a torrent client and I want to link it to one of the many free cloud storage solutions. I think it would be really cool to be able to check and download torrents anywhere and not use my hardware or connection until I want to transfer the files down to my actual desktop (like burning a Linux ISO or to convert the file to a IFO format). Anywyas, I created accounts at 4Shared, EyeOS, GlideOS, ADrive and iCloud and am having no luck. There is an eyeTorrent app but I can't seem to get it configured and I can't log into my cloud storage from the cloud OS. Has anyone been able to pull this off and if so would you please explain how? Thanks, Kristina

  Read the article

• Simple website with a GPL V3 Framework

  - by sineverba

  I write web-based software and simple website ("Home", "Who we are", "Contact"). For a simple website I'm using a covered GPL v3 framework. The user surf the website, send an email, take info, etc. I repeat: simple website, not a Joomla or Wordpress. 1) Will the website be covered with the GPL? I don't modify the framework. I'm using his classes in other classes... (OOP). 2) For the point 1, if yes, do I need to add (e.g. in the footer) name of framework and his link? 3) I must permit download of entire website to study code (nothing that a programmer has interest in)? E.g. placing it in Github? 4) If 2 is NO, how you can "understand" that we use that framework? In effect no php lines are exposed to the browser... You cannot understand that when you push "Send email" the site is calling $this->send($email). If you write me an email "Are you using XXX framework"? I can answer NO.

  Read the article

• Could crosslinking using very general anchor texts be a reason for a drop in rankings?

  - by webmasters

  I have crosslinked 20 sites and I thought I have been penalized for this, asked this question and some experienced members told me maybe that crosslinking may not necessarily be the reason. The sites are on same host, different C class IP and every site in linked to each other. Each site targets long tail kewords. Site 1 - BMW Used Cars - and my area Site 2 - WW Used Cars - and my area And so on... When I crosslinked them (in the sidebar), I did it for the users; instead of repeating the terms used cars and my location over and over (since my users are targeted) I just crosslinked them using the brand: BMW, WW. Targeting locally, my niches are not overly competitive, so I did not need to many external links to rank on various positions on the 1st page. I'm thinking that when I chose to link using only the brand, google might have thought I wanted to actually rank for BBW and WW, hence the drop in my targeted local traffic. Could this be? I now have no-followed the links and I am noticing a slight recovery, but if it's not a interlinking penalty it would be a shame not to benefit from my links.

  Read the article

• How to host ASP.NET application externally?

  - by Josh

  I have an ASP.NET application that I can get to locally by going to 192.168.1.102:81/TestApp. I would like to host the application externally by going to domain.com:81/TestApp (I already have my domain pointing to my router and this works fine - I have apache running on port 80 on another server). I modified the router settings to point any request coming through port 81 to 192.168.1.102. I am still having trouble accessing the ASP.NET site (I get the error message that "This link appears to be broken"). Am I missing something? How can I redirect domain.com:81/TestApp to my ASP.NET application? Thanks.

  Read the article

• Ubuntu-Java Installation-Topcoder-“Java not found”

  - by hakuna121

  I realized that this might be the dumbest question here, but being a total beginner as I am, I really couldn't figure it out after trying all kinds of instructions I could found on the web. Specs: Ubuntu 13.04; What I intended to do: check out the Algorithm Competition section, by clicking the second-to-left tab,located on the top-left of the page: http://community.topcoder.com/tc What I got: a pop-up saying Java not found! Java could not be automatically detected on your machine. This page will attempt to automatically install Java and Java Web Start. If the download and installation does not occur automatically, click the link below to go to the Sun website where you can download the latest version of Java. What I did: I followed instructions on this Ubuntu Documentation page: https://help.ubuntu.com/community/Java and installed OpenJDK(Java Runtime Environment/Browser plugin/SDK) through Ubuntu Software Center. Then I rebooted the system, tried the page again. But I still got the java not found pop-up described above. Question: What's missing the get this working? Thank you!

  Read the article

• Cannot add Windows 7 client to SBS 2008

  - by Sandokan

  I have just installed SBS 2008 R2 Standard on VMware Workstation 9 along with Windows 7 Pro N. Both are activated and running fine. I have followed the steps to configure SBS 2008 and am now at the point where I'm to add a computer to the domain. Here is where the problem begins. I have gone through the steps of using the webinterface. On the client I downloaded Launcher.exe. I then run it and get the error "Check computer requirements - Failed" (translated from swedish): "This computer doesn't reach the requirements for connecting to the network." "The computer doesn't reach the maximum requirements for the operating system with regards to connect to the network" The provided link for More information only leads to a general supportpage and doesn't handle this specific error. I have also checked the time settings and they are correct. Any clue as to what this problem could be?

  Read the article

• sharing life experience

  - by gcc

  I am a student of computer engineering. I have never done any programming before, and as you can understand, I don't know how to study it or how to make my own programs. My English is weak [edited for clarity - ed], and so if you don't like the choices I list, please feel free to provide others. How should I study? How should I learn programming languages? Study completely from a book. Don't study from a book, just try writing code. A mix of the two; study from a book, then try writing code. Study half the book, then write the code by hand on paper. Listed to the teacher, then try to solve general problems (those not from any specific chapter). I have send that question to stackoverflow before when I am at first year. Now, I want to construct webpage to guide fresh students by giving advise of yours and mines.Maybe, you wonder Why I want to construct webpage , I just want help the other student. I am giving a link to that question < http://stackoverflow.com/questions/3389465/how-should-i-study-programming-languagess If you have other advice, feel free. EDIT: This web cite, I think , is constructed to share member's life experience and also I know these experiences is valuable . So I have no right to want your opinion, But I want your opinion / experience even if you think it is not so helpful to other

  Read the article

• How to represent a graph with multiple edges allowed between nodes and edges that can selectively disappear

  - by Pops

  I'm trying to figure out what sort of data structure to use for modeling some hypothetical, idealized network usage. In my scenario, a number of users who are hostile to each other are all trying to form networks of computers where all potential connections are known. The computers that one user needs to connect may not be the same as the ones another user needs to connect, though; user 1 might need to connect computers A, B and D while user 2 might need to connect computers B, C and E. Image generated with the help of NCTM Graph Creator I think the core of this is going to be an undirected cyclic graph, with nodes representing computers and edges representing Ethernet cables. However, due to the nature of the scenario, there are a few uncommon features that rule out adjacency lists and adjacency matrices (at least, without non-trivial modifications): edges can become restricted-use; that is, if one user acquires a given network connection, no other user may use that connection in the example, the green user cannot possibly connect to computer A, but the red user has connected B to E despite not having a direct link between them in some cases, a given pair of nodes will be connected by more than one edge in the example, there are two independent cables running from D to E, so the green and blue users were both able to connect those machines directly; however, red can no longer make such a connection if two computers are connected by more than one cable, each user may own no more than one of those cables I'll need to do several operations on this graph, such as: determining whether any particular pair of computers is connected for a given user identifying the optimal path for a given user to connect target computers identifying the highest-latency computer connection for a given user (i.e. longest path without branching) My first thought was to simply create a collection of all of the edges, but that's terrible for searching. The best thing I can think to do now is to modify an adjacency list so that each item in the list contains not only the edge length but also its cost and current owner. Is this a sensible approach? Assuming space is not a concern, would it be reasonable to create multiple copies of the graph (one for each user) rather than a single graph?

  Read the article

• digital magazine publishing engine licensing question

  - by nosarious

  I have a publishing engine I have been developing for thirty months but find myself being unable to work on it during my masters degree. I would like to make it open source in the interim to get others to use it and improve how it works. I would like to consider a licensing system that allows for multiple instances of the software for singular users (ie, a newspaper/magazine or zine hosting the code on their own). I would like to limit it from becoming the basis of a larger magazine hosting service right now because it is intended to be an integral part of a much larger publishing ecosystem which allows for the creation, dissemination and collection of publications as a free or very inexpensive service. Right now there is no license associated with it, which is why I am not posting a link here. (This system was developed to counter implied censorship for digital magazines and remove costly and confusing 'barriers to entry' for creators wishing to make interactive digital content. It is intended to be useful for free, but I would like to prevent people taking the code and using it to take advantage of others. It needs a bit of work to separate the content from the page itself to allow the access of multiple which I cannot develop right now) Any help or suggestion on how to handle licensing this code for contributions and use would be appreciated, and if anyone would like to see examples or the github I would be happy to send it.

  Read the article

• Is it possible to avoid umask 0002?

  - by Anatoly

  Is it possible to give an automatic ability to modify files(folders and all recursively) created by one user to another within one specified folder (let's say "shared") on the basis of both users belonging to the same secondary group (let's say "coworkers")? I've tried to achieve this by using ACL but with no success. Seems that umask wipes out corresponding bits.... I'm on FreeBSD 8.1 (but seems this problem is actual for other *NIX systems). Googling this problem (people often refer to it as "umask per directory" problem) gives the most relevant link: http://old.nabble.com/ACLs,-umask-and-shared-directories-td27820947.html that is not very promising... Want to ask ServerFault community - is it possible at all?

  Read the article

• OpenBSD Routing Problem

  - by Ozkan SENOVA

  I am running OpenBSD on a network appliance hardware. It has 5 NICs. I want to give different IP's in same subnet to 3 nics. Eg: em0: 192.168.1.5 em1: 192.168.1.90 em2: 192.168.1.56 I make the necessary configuration with ifconfig, all interfaces works as expected when all the ethernet ports are plugged in to switch. But there is something wrong in routing. If I connect to 192.16.1.5 via any service(http, smtp etc.), traffic goes over link#3. If I unpug the cable from em2 I can't reach any IP's binded on device. Is there any way to route traffic over different links in this IP configuration?

  Read the article

• Weekend Project: Build a Fireball Launcher

  - by Jason Fitzpatrick

  What’s more fun than playing with fire? Shooting it from your hands. Put on your robe and wizard hat, make a stop at the hardware store, and spend the weekend trying to convince your friends you’ve acquired supernatural powers. Over at MAKE Magazine, Joel Johnson explains the impetus for his project: A stalwart of close-quarter magicians for years, the electronic flash gun is a simple device: a battery-powered, hand-held ignitor that uses a “glo-plug” to light a bit of flash paper and cotton, shooting a fireball a few feet into the air. You can buy one from most magic shops for around $50, but if you build one on your own, you’ll not only save a few bucks, you’ll also learn how easy it is to add fire effects to almost any electronics project. (And what gadget couldn’t stand a little more spurting flame?) The parts list is minimal but the end effect is pretty fantastic. Hit up the link below for the full build guide, plenty of warnings, and a weekend project that’s sure to impress. How to Own Your Own Website (Even If You Can’t Build One) Pt 3 How to Sync Your Media Across Your Entire House with XBMC How to Own Your Own Website (Even If You Can’t Build One) Pt 2

  Read the article

• How do you import an EPS file in Inkscape?

  - by Neil

  I'm using Inkscape, and I'm trying to import an EPS file to use it as a vector and eventually save it as an SVG. This link here mentions several methods: http://www.inkscapeforum.com/viewtopic.php?f=5&t=797 But the responses aren't rated since it's a forum, so I thought I'd ask here to find the best answer. I'd prefer not to have to use some website to convert the file to a PDF first. Either way, when I import an EPS into Inkscape, or use the website to convert it to a PDF, in both cases the resulting file loses all colour and gradients, and the EPS file gets cut off on the right side. It looks like ps2pdf is clipping the file incorrectly, and Inkscape is eliminating the colour. I have these version installed in Ubuntu Lucid Linux: Inskape 0.47.0-2ubuntu2 Ghostscript 8.71.dfsg.1-0ubuntu5.3

  Read the article

• Best DSL hardware for ADSL Troubleshooting

  - by Jeff Sacksteder

  I have a situation where I need to make the best of a bad DSL situation. The CPE is a black box with no access to DSL diagnostics. My plan is to get some sort of DSL hardware that exposes link-layer state and gives me knobs to tweak. I'd like to be able to mitigate bufferbloat as much as I can while I'm at it. The obvious choice would seem to be a Sangoma card in a linux system. I have no way of knowing if that will do anything for me without testing it, however. I have no other access to WAN troubleshooting equipment. Are there any other options avail to me as a consumer?

  Read the article

• Javascript widgets: do links count as SEO backlinks? [closed]

  - by j0nes

  Possible Duplicate: How good is it for SEO if you have a widget that lives on other sites? On my website I offer an option to let users embed information from my site with some kind of "homepage widget". If a user wants to embed it in his website, he basically has to add one line of Javascript to his HTML files like this: <script src="http://mysite.com/myscript.php?some_options_here"></script> Inside the widget, I export some content from my website and of course create a link back to my website. This is done in Javascript with document.write. document.writeln("My great exported content"); document.writeln('<a href="http://mysite.com?ref=widget>Check mysite.com</a>'); I have Google Analytics set up to track whether the links in there get clicked, and they do. Now I am asking myself if Google recognizes these links as valid backlinks from the embedding domain. I know that Googlebot can parse and execute Javascript, but I have not found any references whether these links also count as "normal" backlinks.

  Read the article

• Domain only responding to certain locations?

  - by CuriosityHosting

  I have a client who's been having problems with his site. The server doesn't seem to want to load hes site in certain countries, though other sites are fine. But this site [link removed] only seems to load in the US and Canada. In Europe, the UK, Asia etc, the site seems to be blocked (been like this for a week now). I've looked over the server and it seems fine. Other sites work fine, and the NS are set up properly, pointing to my main server, at http://puu.sh/MIGF Any ideas?

  Read the article

• Creating a server of an xp computer?

  - by Sweppi

  Hey, I want to create a server for my website since what I'm going to have on the website is far more than I can store web hotel. So I have this xp computer I'd like to use as a server. I did have a guide of this but unfortunately the link broke. But what i understood was that I'd be in need of a windows 2000 disc for this to work. Do you have any good tutorials/guides about how I can remake my xp computer to a server? The computer is running windows xp home edition Service Pack 2 Thank you in advance!

  Read the article

• Tools/Tips to reduce the files/directories in C: which is SSD on Windows 7.

  - by prosseek

  I bought a SSD to install it as C: drive on Windows 7. As the SSD size is relatively small, I need to come up with an idea to reduce the files/directories in C:. What I found is as follows. Run WinDirStat to check how the C: is used. Remove the hibernate file (if you don't use it) powercfg –h off http://helpdeskgeek.com/windows-7/windows-7-delete-hibernation-file-hiberfil-sys/ Symbolic link files and directories to different drive. I'm not sure if this is safe way to go, I asked another post to ask about it. mklink /d e:\windows\installer c:\windows\installer Install software to E: directory, not C: directory. Create E:\Program Files What other tools or tips do you have?

  Read the article

• Oracle E-Business Products New Search Helpers for Guided Resolution of Customer Issues

  - by user793044

  Oracle E-Business Proactive Support has created many new guided resolution documents that you may find helpful in resolving issues in your EBS applications.  These new documents are called “Search Helpers” and they guide you through your issue to a solution.  They are meant to be an easy and fast method to finding a relevant, complete solution. Hundreds of notes and service requests were reviewed and the best solutions to these known issues were selected.  For some issues, notes were updated to better clarify the solution.  In other cases, if a note with a solution did not already exist, one was created. You start the process by selecting the scenario you have encountered.  You may have received an error message, or there may be a particular area of the application in which you have encountered an issue.  Based on your selection of the issue, the Search Helper will present one or more additional possible symptoms.  When you have selected from both of these two sections, you are then presented with one or more articles known to have fully solved this issue in the past.  Several EBS products have produced Search Helpers documents.  Take a look at Doc ID 1501724.1 for an index of the current EBS Search Helpers.  Here is an example of a Search Helper from the Receivables Transactions area: After selecting the Functional Area of "Entering / Updating Transactions" a list of Known Symptoms is presented: And, when "Transaction numbers are not in sequence" is selected, a solution link is provided for Document ID 197212.1: How To Setup Gapless Document Sequencing in Receivables. The EBS applications that currently have published Search Helpers are: Advanced Pricing Applications Technology Configurator General Ledger Human Capital Management Inventory Management Order Management Payables Process Manufacturing Purchasing Receivables Shipping Value Chain Planning

  Read the article

• MVC: Nasty __o not declared

  - by xamlnotes

  I ran into this little error with MVC where a bunch of errors showed up about  __o  not declared. This was driving me nuts. Then I ran across this link that solved it. http://stackoverflow.com/questions/750902/how-do-i-get-rid-of-o-is-not-declared So, the solution is to put this into the top of the page like VS does for your site.master. <%-- The following line works around an ASP.NET compiler warning --%> <%: ""%> But what about other pages? Lets say you have a view that’s using your site master and that view is throwing this error. Just add the items into the content section where the error occurs like so: <asp:Content ID="indexContent" ContentPlaceHolderID="MainContent" runat="server"> <%-- The following line works around an ASP.NET compiler warning --%> <%: ""%>   Then add the rest of your code. That seems to fix it and its pretty simple too.

  Read the article

• Can someone help me?

  - by user38124

  Sorry, but I want to say something here, my friend have a new software called "Edited out see revisions 8.0", it can help people to reset any windows password. As I am kind for this website, so I want to know where can help me to submit it? Can you give me some advice? Here is a lilltle message about key 8.0: blablabla spam marketing can I submit the software link here ? for this, friends who view my post can go and help me for some advices to improve it? Thank you very much!

  Read the article

• Good links somehow being converted to ones with a PHP redirect (not a virus)

  - by Rebecca

  This has happened to links we put on web pages and in emails. We might put www.oursite.org/work/ but when I view source it shows up as webmail.ourhosting.ca/hwebmail/services/go.php?url=https%3A%2F%2Fwww.oursite.org%2F%2work%2F This ends up at the webmail login page for our web host. But only some of the people who click the link get the login page; others go directly to the original page we intended. We don't want it to go to the webmail login page, nobody needs to log in to our web site. This occurs for links to pages on our site, but also to links to other sites that we put in emails or in posts. It seems to be browser independent as well as e-mail client independent as we variously have used Firefox and Chrome as well as MS Outlook and Thunderbird. I've tried to resolve the issue with our webhost but they keep telling me they don't support our browser, or our email client (i.e., they don't understand the issue). At the moment, our only option is to try another web host just to get rid of their login. Any ideas about what's going on?

  Read the article

• Why is the US international keyboard layout on Ubuntu different?

  - by pablo

  I have been using Linux on and off for 10 years, and more recently I have spent more time with OSX. But, I still remember that in the beginning I'd choose the US international keyboard layout and it would have exactly the same output as the Windows keyboard layout (and most recently, the OSX US international layout). However, a few years ago when I installed Ubuntu, I noticed that the cedilla wasn't printed anymore (ç or Ç). This is a combination of the following keys: ' + c. Instead, what I get is the c letter. When did it start to happen, and why the difference to the behavior on the other OSes? What puzzles me even more is that there is even an "US International alternative" keyboard layout, which prints exactly the same keys! So, what's it alternative to? This has been reported as a bug back to Canonical (can't find the link now), but the keyboard layout has never changed back to what I'd expect. I know the workarounds to fix it to what I need, but I just would like to know why/when it has become different.

  Read the article

< Previous Page | 654 655 656 657 658 659 660 661 662 663 664 665  | Next Page >