Search Results

Search found 5868 results on 235 pages for 'reverse proxy'.

Page 66/235 | < Previous Page | 62 63 64 65 66 67 68 69 70 71 72 73  | Next Page >

• accessing a web server from the LAN and WAN

  - by jessh

  My router does not support loopback. In order to view a webpage on my server, I either have to type in the local ip (192.168.1.201), or be on another network. What are my options for making this easier? Here are some possible things: Route all web traffic through an external proxy (seems to be overkill) Run my own DNS server (where to start?!) Buy a new router that supports loopback. Surely there is another way that I can use my laptop on the LAN and the WAN by typing in my domain more easily than these solutions.

  Read the article

• Is there a webproxy via email?

  - by mafutrct

  This is probably a bit weird, and I don't think it exists yet. I'm basically asking for a program that, upon receiving a request via email, downloads a html page and sends it via email, possibly changing the links inside the page into outgoing emails to this program asking for another page. This is certainly one of the most crude ways of accessing the web, and obviously fails at anything beyond the most basic stuff. But it may still be useful to those that can send email, but can't access the web due to company policy or whatever reason. In the (likely) case this does not exist, I'd be interested to write such a proxy.

  Read the article

• Proxying MMS Stream on a LAN

  - by Matthew Iselin

  A variety of users on our LAN would like to listen to an MMS stream, and in the interest of conserving bandwidth (and because our WAN connection is not fast at all) I was wondering if it was possible to set up a service which proxies the stream from the WAN and provides it to LAN computers, thus only downloading the stream once and then distributing it to clients. Any ideas? I have a Linux box serving as our LAN-WAN router, so it'd be ideal if something could sit on it and proxy the stream, but I also have Linux and Windows workstations. A free solution would be preferred.

  Read the article

• IIS 7 Request routing

  - by Abraham Durairaj

  Not sure the title is right. I have my site configured in IIS7 and I have another partner site which runs on a different port eg. http:// localhost:1234 /mysite. Can I have my parent site to have a virtual site http:// localhost /mysite to route requests to the partner site http://localhost:1234 /mysite. I should not redirect but I should basically proxy the requests. Any help here is appreciable. Thanks in advance.

  Read the article

• LDAP Authentication for multiple AD Domains

  - by TrevJen

  I have 3 full trust domains (2 child and one root). I need to use LDAP to allow authntication for domain users. The trick is that I need the application to use an AD server for the child domain BUT proxy the LDAP query and authentication for the root domain. I see that it maty be possible with AD LDS and some trusts and synching, but it looks pretty hairy and overly complicated. The short of it is: 3 domains (Parent, ChildA, ChildB) My 3rd party app will need to use ChildA domain servers to authenticate either: a. a user in the parent domain or b. a user in the ChildB domain I already have full trusts between all domains, and regular NTLM authentication works fine (unless you are trying to authenticate with LDAP)

  Read the article

• Squid closing the connection on long HTTP GET requests

  - by Rhys

  Hello, When running a database query on a specific external site we use, Squid seems to cut off the connection after a consistent period of time (just over a minute). The query is submitted through a standard web form is that uses GET to query their database. Firefox 3 just displays a blank page. Internet Explorer throws a 'Page Cannot Be Displayed' error (tested in v6 and v8). When we perform the same query on the same machine, but bypass the Squid proxy, it works fine. The query takes about two and a half minutes to complete. There are a few timeout settings in Squid, but I honestly don't know what one to be looking at. Any possible solutions would be much appreciated. Cheers

  Read the article

• Experience with HAVP

  - by Kyle Brandt

  I have employees that have to search sketchy virus-ridden websites as part of their job. They all have XP and Symantec AV installed but they still get hit fairly often. Rather then trying all sorts of desktop level solutions, I was thinking about maybe some sort of Proxy in addition to symantec for when they browse these sites? Anyone have experience with HAVP? Am I going about this the wrong way? If this is the right way, and free alternatives to HAVP?

  Read the article

• Is there a network "tee"-alike with one leg returning to /dev/null ?

  - by Steff Davies

  I've just built a new PostgreSQL server for my employers, which is happily replicating using WALs. I'm now left with the problem of verifying its performance. One nice way which came up in conversation is to break replication with the slave caught up and then direct all production traffic to both servers, discarding the responses from the new server and returning those from the current one to the clients. Once we're sure performance is OK, we re-sync the slave and can fail over with confidence. Bliss. This would require a TCP proxy capable of opening two outgoing connections for each incoming one, and discarding the data returned from one of them, which is a tricky thing to google for, it seems. Do the assembled brains know of such a thing, before I dive into libevent and write one?

  Read the article

• Squid/Kerberos authentication with only Linux

  - by user28362

  Hi, I would like to know if it possible to let a Windows Xp machine authenticate to Squid (Linux) using Kerberos without the need of an Active Directory domain. I only want to create a Kerberos ticket on the client side, which should give the client access to squid (using I.E.). I only found tutorials about configuring A.D./Squid, not an environment with only Linux servers. Thanks Update: The kerberos setup is correctly done, the proxy and client can get tickets. As for the browser (FF/IE), I get: ERROR Cache Access Denied While trying to retrieve the URL: http://www.google.com/ The following error was encountered: * Cache Access Denied. Sorry, you are not currently allowed to request: http://www.google.com/ from this cache until you have authenticated yourself. In kerberos, I get: squid_kerb_auth: Got 'YR ElRNTVMTUABBAABAB4IIogAAAAAAAAAAAAAAAAAAAAAFASgDAAAADw==' from squid (length: 59). squid_kerb_auth: parseNegTokenInit failed with rc=101 squid_kerb_auth: received type 1 NTLM token This message is strange, as I didn't configure NTLM. It looks like the browser uses the wrong authentication methode.

  Read the article

• Apache mod_proxy parameters

  - by mike

  Hi! I have a machine running Apache with mod_proxy that I'm using to proxy a local Tomcat server running on another port. The problem is that Tomcat does not support wildcard sub-domains(whole reason for using apache/mod_proxy) and our app uses the subdomain to figure out what account the data should come from. So with that said, is there a way to pass the subdomain as a url parameter via mod_proxy? For example, I have this: ProxyPass / http://example.com:8080/ In a virtual host block and I can access the site from any subdomain. Would is be possible to do something like: ProxyPass / http://example.com:8080/?subdomain=the_sub_domain_requested Thanks for any and all help... Mike

  Read the article

• Proxying fake domain to a localhost port

  - by Trevor Burnham

  I'd like to do much the same thing described at Redirect Domain Name to Localhost for web app development purposes, but with the twist that I'd like requests to fakedomain.com:80 to be routed to localhost:8080, say, so that I don't have to actually use my development machine's port 80. I'd welcome answers that take the form of: Small changes to configuration files like /etc/hosts, and/or An easy-to-configure proxy server I could run Note: Pow takes the approach of setting a firewall rule to forward all incoming traffic on port 80 to port 20559. That may be an acceptable solution, but ideally, I'd like to forward only a specific domain + port combination.

  Read the article

• Is SmoothWall a good firewall alternative?

  - by Oden

  I found this linux distribution, called SmoothWall. I read its documentation and it looks pretty for me. The only problem is, that I'm not a big linux professional and I have also not a lot of experience but I want to know your thoughts about this "Firewall OS"! Can it be used for small-business environment, with 15-17 PC-s? I would use the server also as cache proxy. Is this a good idea? (I mean, using one server for two things)

  Read the article

• Trouble with mod_proxy and mongrel_rails

  - by x3ro

  Hey there I'm trying to set up a mod_proxy - mongrel combination, but somehow, apache/mod_proxy is unable to access mongrel locally. The following is my configuration for mod_proxy: ProxyRequests Off ProxyPreserveHost On <Location / ProxyPass http://localhost:3000/ ProxyPassReverse http://localhost:3000/ Order deny,allow Allow from all </Location Mongrel/Rails ist running just fine, because I can access it from my browser, and even with lynx on the server. However, I get the following error when trying to use the proxy: [error] [client 127.0.0.1] Invalid Content-Length I would appreciate any help :D PS: Oh, and the server is running Plesk to configure vhosts, if thats important.

  Read the article

• Root certificate authority works windows/linux but not mac osx - (malformed)

  - by AKwhat

  I have created a self-signed root certificate authority which if I install onto windows, linux, or even using the certificate store in firefox (windows/linux/macosx) will work perfectly with my terminating proxy. I have installed it into the system keychain and I have set the certificate to always trust. Within the chrome browser details it says "The certificate that Chrome received during this connection attempt is not formatted correctly, so Chrome cannot use it to protect your information. Error type: Malformed certificate" I used this code to create the certificate: openssl genrsa -des3 -passout pass:***** -out private/server.key 4096 openssl req -batch -passin pass:***** -new -x509 -nodes -sha1 -days 3600 -key private/server.key -out server.crt -config ../openssl.cnf If the issue is NOT that it is malformed (because it works everywhere else) then what else could it be? Am I installing it incorrectly? Update I tried changing the certificate attributes, but to no avail: openssl genrsa -des -passout pass:***** -out private/server.key 2048 openssl req -batch -passin pass:***** -new -x509 -nodes -sha256 -days 3600 -key private/server.key -out server.crt -config ../openssl.cnf

  Read the article

• Nginx (for static files) and Apache (for dynamic content)?

  - by matthewsteiner

  So, my entire application runs on apache just fine. However, I want to test how much the requests per second increases if I put all static files through nginx instead. I found this thread: http://stackoverflow.com/questions/869001/how-to-serve-all-existing-static-files-directly-with-nginx-but-proxy-to-apache-t But I have a couple problems. I'm completely new to nginx, so I'm not sure where to put the configuration. (The file is at /etc/nginx/nginx.conf, but I don't know if I just add the code to the bottom or what?) Also, how can I have both servers running at the same time? Is it because they both listen on port 80? Right now I have to stop one to start the other, and that's as far as I've gotten. Thanks for any help.

  Read the article

• SFTP: How to keep data out of the DMZ

  - by ChronoFish

  We are investigating solutions to the following problem: We have external (Internet) users who need access to sensitive information. We could offer it to them via SFTP which would offer a secure transport method. However, we don't want to maintain the data on server as it would then reside in the DMZ. Is there an SFTP server that has "copy on access" such that if the box in the DMZ were to be compromised, no actual data resided on that box? I am envisioning an SFTP Proxy or SFTP passthrough. Does such a product exist currently?

  Read the article

• How can I reroute a sub-domain to localhost + port number?

  - by urig

  I have several web applications running on my developer machine. They mimic our production web applications which are hosted on sub-domain. For example, consider: api.myserver.com - is mimicked by 127.0.0.1:8000 www.myserver.com - is mimicked by 127.0.0.1:8008 and so on... How can I make it so that, on my Windows 7 machine, HTTP calls to "api.myserver.com" (note the lack of port number) are redirected to 127.0.0.1:8000 etc? Note that this needs to apply both to client-side calls (in the browser) and server-side calls (from IIS to Python development server and vice versa). Do I need a proxy to run locally to achieve this? Can you recommend such a tool?

  Read the article

• Logs being flooded from Squid for having intercepted and authentication enabled together

  - by Horace

  I have done some hefty Google'ing and I can't seem to find a single solution to this issue that I cam currently experiencing. Here is a sample configuration from squid that I have: # # DIGEST Auth # auth_param digest program /usr/sbin/digest_file_auth /etc/squid/digpass auth_param digest children 8 auth_param digest realm LHPROJECTS.LAN Network Proxy auth_param digest nonce_garbage_interval 10 minutes auth_param digest nonce_max_duration 45 minutes auth_param digest nonce_max_count 100 auth_param digest nonce_strictness on # Squid normally listens to port 3128 # Squid normally listens to port 3128 http_port 192.168.10.2:3128 transparent https_port 192.168.10.2:3128 intercept http_port 192.168.10.2:3130 As noted above, I have three ports defined, 2 of them are transparent/intercept and one is a regular http port (which I use for authentication). Which works rather well in this configuration however my logs are getting flooded of this entry authentication not applicable on intercepted requests whenever a transparent connection is made. So far, I can't seem to find any documentation that would describe how to suppress these messages ?

  Read the article

• Squid closing the connection on long HTTP GET requests

  - by Rhys

  When running a database query on a specific external site we use, Squid seems to cut off the connection after a consistent period of time (just over a minute). The query is submitted through a standard web form is that uses GET to query their database. Firefox 3 just displays a blank page. Internet Explorer throws a 'Page Cannot Be Displayed' error (tested in v6 and v8). When we perform the same query on the same machine, but bypass the Squid proxy, it works fine. The query takes about two and a half minutes to complete. There are a few timeout settings in Squid, but I honestly don't know what one to be looking at. Any possible solutions would be much appreciated. Cheers

  Read the article

• Workaround for API limits [closed]

  - by blunders

  Problem: Planning on building out a client services company that requires access to APIs. Most APIs are limited based on user, IP, etc. - and even though the API calls would be on a per client basis, there's no way to get usage not tied to IPs. (Theoretical) Solution: Have each client install on their network a proxy/VPN that would allow my systems to connect and use their assigned usage. So, it's possible there's a better solution than the one I've thought of, but it's the only one I've been able to come up with.

  Read the article

• Redirect traffic to local address so iOS speedtest app measures LAN speed

  - by ivan_sig

  I have mounted a Speedtest Mini server on a local LAMP, so I can test my LAN speeds effortlessly just by opening the URL with a Flash enabled web browser, the thing is, I want my iOS and Android devices to test with the LAN server too, not with the WAN, as I'm trying to measure LAN-Only performance. Is there a way so I can redirect the traffic intended to an specific external IP (The one of the real server) to my local server?. I know the servers IP as a short Wireshark analysis gave me the data, but still searching for a way to make that redirect. I have Jailbreak and root on my devices, so playing with system files is not a problem. I've tried mounting a proxy and making redirects by the hosts file and domain names, but it looks like Ookla's app relies on IP address only.

  Read the article

• IE Search Provider: Specifying gTLD / Country-Specific Site

  - by jwa

  I am based in the UK, and as such typically use google.co.uk as my search engine. However, my employer is based in continental Europe, and thus my internet proxy is located overseas. As a result, IP geo-location presents a location outside of the UK. Google detects this, and as a result will redirect my searches from the address bar to a foreign Google domain. This leads to "local" answers having a higher ranking, many of which are not written in English language! Is there a specific search provider / URL I can give to IE which will use a specific gTLD of google (.co.uk), rather than performing the location-based redirect?

  Read the article

• Squid randomly stops serving requests. How can I resolve this issue?

  - by Vijay

  The squid (2.7) proxy that I have running on ubuntu 8.10 stops accepting new requests after being online for a while, due to reasons that I can't discover. However doing a squid -k reload resolves the problem immediately. Now I manually run this command by monitoring the log and if i don't see any activity for 5 minutes I reload the config. Now on my quest for a solution I had several ideas: diagnose the root cause and eliminate it setup a script to automatically reload script if no new entries in access.log for the past 3 minutes painstakingly upgrade server to newer ubuntu version while keeping network offline or during off hours to minimize downtime. so i thought I would turn to you for solutions to option 2), as I do not understand squid enough for 1), and I'm avoiding 3) as long as i can. so can ideas?

  Read the article

• How can I access blocked sites while in China?

  - by Samuurai

  I have some colleagues who need to go to China for work, however while they're there, they can't access a lot of sites. One of which is GMail (Google Apps), which they need for work. We have a UK based Ubuntu server, which I have root access for. What can I do for them? I thought about a Squid proxy, but it might rely on their hotel having port 8080 open, so, not ideal. Are there any workarounds or other solutions?

  Read the article

• Squid 2.7.6 not honoring ACL rules

  - by peppery

  Hello there, I have a /24 block of IP addresses assigned to a single server that I have been attempting to install Squid on an Ubuntu server machine. All of the IP addresses are set up correctly (aliases of eth0) in /etc/networking and work as they should be, using cURL I can specify an interface and it goes out on the correct address as it should be. I would like Squid to take the incoming IP address the request was sourced to and proxy the request out on the same IP (e.g incoming 123.123.123.1:3128 - 123.123.123.1, .2 - .2, etc) and have set up these ACL rules in /etc/squid.conf acl ip1 myip x.x.x.1 tcp_outgoing_address x.x.x.1 ip1 acl ip2 myip x.x.x.2 tcp_outgoing_address x.x.x.2 ip2 acl ip3 myip x.x.x.3 tcp_outgoing_address x.x.x.3 ip3 and so on, as this seems to be the only way to do what I want (from research). However, after much frustration, Squid seems to be ignoring these rules and sending requests out on the default interface. Does anybody have any suggestions? Thanks.

  Read the article

< Previous Page | 62 63 64 65 66 67 68 69 70 71 72 73  | Next Page >