Search Results

Search found 4885 results on 196 pages for 'delivery failure'.

Page 67/196 | < Previous Page | 63 64 65 66 67 68 69 70 71 72 73 74  | Next Page >

• How to get data out of a Maxtor Shared Storage II that fails to boot?

  - by Jonik

  I've got a Maxtor Shared Storage II (RAID1 mode) which has developed some hardware failure, apparently: it fails to boot properly and is unreachable via network. When powering it on, it keeps making clunking/chirping disk noise and then sort of resets itself (with a flash of orange light in the usually-green LEDs); it then repeats this as if stuck in a loop. In fact, even the power button does nothing now – the only way I can affect the device at all is to plug in or pull out the power cord! (To be clear, I've come to regard this piece of garbage (which cost about 460 €) as my worst tech purchase ever. Even before this failure I had encountered many annoyances about the drive: 1) the software to manage it is rather crappy; 2) it is way noisier that what this type of device should be; 3) when your Mac comes out of sleep, Maxtor's "EasyManage" cannot re-mount the drive automatically.) Anyway, the question at hand is how to get my data out of it? As a very concrete first step, is there a way to open this thing without breaking the plastic casing into pieces? It is far from obvious to me how to get beyond this stage; it opens a little from one end but not from the other. If I somehow got the disks out, I could try mounting the disk(s) on one of the Macs or Linux boxes I have available (although I don't know yet if I'd need some adapters for that). (NB: for the purposes of this question, never mind any warranty or replacement issues – that's secondary to recovering the data.)

  Read the article

• Apache httpd workers retry

  - by David Newcomb

  I have an Apache httpd web server running mod_proxy and mod_proxy_balancer. The whole of /somedir is sent to 2 worker machines which service the requests using the round robin scheduler. Each worker machine is running IIS but I don't think that is important. I can demonstrate the load balancer working by repeatedly requesting a single page which contains the IP address of the machine and can see that it switches from one to the other in a predictable round robin fashion. If I switch off one of the IIS servers and start requesting the same page then each page only contains the IP address of the machine that is up. However, if I start IIS and don't run my IIS application then /somedir returns 500 (as it should). I've added 500 to the failonstatus (Apache 2.4) so when it hits the error Apache places the worker machine into error state. Apache still returns the proxy error to the client though. How can I make Apache catch the proxy failure and retry using a different worker in the same way that a connection failure does. Update There is almost the same question asked in StackOverflow so joining them together. http://stackoverflow.com/questions/11083707/httpd-mod-proxy-balancer-failover-failonstatus-transperant-switching

  Read the article

• Router reporting failed admin login attempts from home server

  - by jeffora

  I recently noticed in the logs of my home router that it relatively regularly lists the following entry: [admin login failure] from source 192.168.0.160, Monday, June 20,2011 18:13:25 192.168.0.160 is the internal address of my home server, running Windows Home Server 2011. Is there anyway I can find out what specifically is trying to login to the router? Or is there some explanation for this behaviour? (not sure if this belongs here or on superuser...) [Update] I've run both Wireshark and netmon for a while on my home server. Wireshark captured the traffic, but didn't really show anything useful (or nothing I could make use of). A simple HTTP GET request is sent from the server (192.168.0.160) to the router (192.168.0.1), from a seemingly random port (I've seen examples from 50068, 52883), and it appears to do it twice in quick succession (incrementing port by 1), about every hour. Running netstat around the time of the failure didn't show anything (probably too long after anyway). I tried using netmon as it categorises by process, so I thought it might show a corresponding process for the port. Unfortunately, this comes in under the 'unknown' category, meaning it's basically just a slower, less useful Wireshark. I know there's not much to go on here, but does this help in anyway?

  Read the article

• KVM Hosting: How to efficiently replicate guests

  - by javano

  I have three KVM servers each with 1 guest VM, running directly on it's local storage, (so they are essentially getting a dedicated box worth of computing power each). In the event of a host failure I would like the guests replicated to at least one of the other hosts so I can spin it up there, until the failing host is fixed. I am curious about KVM cloning. I can clone a VM live or when it's suspended/shutdown. Obivously suspended VMs will naturally be quicker to clone but these three VMs comprise three parts of a single solution, so I don't want to ever have any one of them shutdown. How can I efficiently clone these VMs between servers? I have had a couple of ideas, but are these insane or, is there a better method I have missed for my scenario? Set up a DRDB partition between box 1 and 2 where VM 1 runs from, and so is replicated between box1 and box 2, repeat between box 2 & 3, and box 3 & 1 (This could be insane, I have never used DRDB only read about it) Just use standard KVM CLI clone options to perform live clones (I'm dubious about this because I don't know how long it will take and what the performance impact will be during) Run a copy of each VM on at least one other host, and have the guest on one host export it's data to the matching guest on another host where it can import that data, scripting this on the guest) Some of other way? Ideas welcome! Side Note These servers have 4x15k SAS drives in a RAID 10 so they aren't rocketing fast, and as I mentioned, each VM runs from the host's local storage, no NAS or SAN etc. So that is why I am asking this question about guest replication. Also, this isn't about disaster recovery. Guests will be exporting their data to a NAS over a VPN, so I am looking at how I can have them quickly spun up in a host failure situation.

  Read the article

• High availability virtual machines

  - by Jeremy

  I've been reading a lot about high availability virtualization, either via Hyper-V or VMWare. In that context, essentially high availabliity means that the VM is hosted by a closter of physical servers (nodes), so if one of the physical servers goes down, the VM can still be served by other physical servers. So far so good, the physical cluster and the VM itself are highly available. However if the service being provided, let's say SQL server, MSDTC, or any other service, are actually being provided by the VM image and the virtualized operating system. So I imagine that there is still a point of failure at the virtual layer that isn't accounted for. Something could happen within the virtual machine itself that the physican cluster can not account for, correct? In that instance the physican failover cluster (Hyper-V) or VMWare host, can not fail over, because the issue is not with one of the servers in the physical cluster - failing over a physical node would not do any good. Does this necessitate building a virtual failover cluster on top of the physical one, or is this not necessary? Alternatively, I suppose you could skip the phsyical clustering, and just cluster at the virtual layer (Child based failover clustering), because that should still survive a physical failure. See image below showing parent based (left), child based (right) and a combination (center). Is parent based as far as you need to go, or is child based more appropriate?

  Read the article

• How to write rules for persistent net names?

  - by ndemou

  I know that a process generates persistent network card names based on rules found in /lib/udev/rules.d/75-persistent-net-generator.rules. I also know how to completely disable this process with a simple echo '#' > /etc/udev/rules.d/75-persistent-net-generator.rules but I've read that I "could also write my own rules file to give the interface a name — the persistent rules generator ignores the interface if a name has already been set" (/etc/udev/rules.d/README confirms that this is possible). Do you have any pointers to documentation about how to write such rules? (I mostly care about Debian/Ubuntu and a bit less for CentOS) As a specific example of why I want to write custom rules: I have two identical servers with one onboard LAN and one PCI LAN. In case of HW failure I want to be able to move disks from HW#1 to HW#2 and it's important for eth0 to continue pointing to the onboard card and eth1 to the PCI card (no one wants to mess with cabling in the middle of a HW failure panic). My current workaround works but is a lot of work[1] so I wonder if writing custom rules would allow me to express something simple like this: cards with MAC A or B should be named eth0 cards with MAC C or D should be named eth1 follow default naming scheme for anything else [1] install the OS in HW#1 and keep a copy of /etc/udev/rules.d/70-persistent-net.rules. Move the disks to HW#2 and keep a second copy of the same file. Concatenate the two copies and manually edit the NAME="ethX" part. Replace /etc/udev/rules.d/70-persistent-net.rules with my version. Finally disable auto-creation of a new 70-persistent-net.rules using echo '#' > /etc/udev/rules.d/75-persistent-net-generator.rules

  Read the article

• Google Chrome won't install via IE9/Windows7

  - by purir

  Using IE9, I've tried installing Google Chrome on Windows 7 from this url http://www.google.com/chrome/eula.html?hl=en-GB&platform=win But get the following error (apologies for uncouthly dumping this nonsense...) Any ideas dearly appreciated! PLATFORM VERSION INFO Windows : 6.1.7601.65536 (Win32NT) Common Language Runtime : 4.0.30319.235 System.Deployment.dll : 4.0.30319.1 (RTMRel.030319-0100) clr.dll : 4.0.30319.235 (RTMGDR.030319-2300) dfdll.dll : 4.0.30319.1 (RTMRel.030319-0100) dfshim.dll : 4.0.31106.0 (Main.031106-0000) SOURCES Deployment url : _http://dl.google.com/update2/1.3.21.57/GoogleInstaller_en-GB.application?appguid%3D%7B8A69D345-D564-463C-AFF1-A69D9E530F96%7D%26iid%3D%7B26C55C3A-B26A-0484-FEDD-78443D269DA1%7D%26lang%3Den-GB%26browser%3D2%26usagestats%3D0%26appname%3DGoogle%2520Chrome%26needsadmin%3Dfalse%26installdataindex%3Ddefaultbrowser ERROR SUMMARY Below is a summary of the errors, details of these errors are listed later in the log. * Activation of _http://dl.google.com/update2/1.3.21.57/GoogleInstaller_en-GB.application?appguid%3D%7B8A69D345-D564-463C-AFF1-A69D9E530F96%7D%26iid%3D%7B26C55C3A-B26A-0484-FEDD-78443D269DA1%7D%26lang%3Den-GB%26browser%3D2%26usagestats%3D0%26appname%3DGoogle%2520Chrome%26needsadmin%3Dfalse%26installdataindex%3Ddefaultbrowser resulted in exception. Following failure messages were detected: + The system cannot find the file specified. (Exception from HRESULT: 0x80070002) COMPONENT STORE TRANSACTION FAILURE SUMMARY No transaction error was detected. WARNINGS There were no warnings during this operation. OPERATION PROGRESS STATUS * [25/06/2011 11:41:04] : Activation of _http://dl.google.com/update2/1.3.21.57/GoogleInstaller_en-GB.application?appguid%3D%7B8A69D345-D564-463C-AFF1-A69D9E530F96%7D%26iid%3D%7B26C55C3A-B26A-0484-FEDD-78443D269DA1%7D%26lang%3Den-GB%26browser%3D2%26usagestats%3D0%26appname%3DGoogle%2520Chrome%26needsadmin%3Dfalse%26installdataindex%3Ddefaultbrowser has started. ERROR DETAILS Following errors were detected during this operation. * [25/06/2011 11:41:04] System.IO.FileNotFoundException - The system cannot find the file specified. (Exception from HRESULT: 0x80070002) - Source: System.Deployment - Stack trace: at System.Deployment.Internal.Isolation.IsolationInterop.GetUserStore(UInt32 Flags, IntPtr hToken, Guid& riid) at System.Deployment.Application.ComponentStore..ctor(ComponentStoreType storeType, SubscriptionStore subStore) at System.Deployment.Application.SubscriptionStore..ctor(String deployPath, String tempPath, ComponentStoreType storeType) at System.Deployment.Application.SubscriptionStore.get_CurrentUser() at System.Deployment.Application.ApplicationActivator.PerformDeploymentActivation(Uri activationUri, Boolean isShortcut, String textualSubId, String deploymentProviderUrlFromExtension, BrowserSettings browserSettings, String& errorPageUrl) at System.Deployment.Application.ApplicationActivator.ActivateDeploymentWorker(Object state) COMPONENT STORE TRANSACTION DETAILS No transaction information is available.

  Read the article

• Google Chrome won't install via IE9/Windows7

  - by purir

  Using IE9, I've tried installing Google Chrome on Windows 7 from this url http://www.google.com/chrome/eula.html?hl=en-GB&platform=win But get the following error (apologies for uncouthly dumping this nonsense...) Any ideas dearly appreciated! PLATFORM VERSION INFO Windows : 6.1.7601.65536 (Win32NT) Common Language Runtime : 4.0.30319.235 System.Deployment.dll : 4.0.30319.1 (RTMRel.030319-0100) clr.dll : 4.0.30319.235 (RTMGDR.030319-2300) dfdll.dll : 4.0.30319.1 (RTMRel.030319-0100) dfshim.dll : 4.0.31106.0 (Main.031106-0000) SOURCES Deployment url : _http://dl.google.com/update2/1.3.21.57/GoogleInstaller_en-GB.application?appguid%3D%7B8A69D345-D564-463C-AFF1-A69D9E530F96%7D%26iid%3D%7B26C55C3A-B26A-0484-FEDD-78443D269DA1%7D%26lang%3Den-GB%26browser%3D2%26usagestats%3D0%26appname%3DGoogle%2520Chrome%26needsadmin%3Dfalse%26installdataindex%3Ddefaultbrowser ERROR SUMMARY Below is a summary of the errors, details of these errors are listed later in the log. * Activation of _http://dl.google.com/update2/1.3.21.57/GoogleInstaller_en-GB.application?appguid%3D%7B8A69D345-D564-463C-AFF1-A69D9E530F96%7D%26iid%3D%7B26C55C3A-B26A-0484-FEDD-78443D269DA1%7D%26lang%3Den-GB%26browser%3D2%26usagestats%3D0%26appname%3DGoogle%2520Chrome%26needsadmin%3Dfalse%26installdataindex%3Ddefaultbrowser resulted in exception. Following failure messages were detected: + The system cannot find the file specified. (Exception from HRESULT: 0x80070002) COMPONENT STORE TRANSACTION FAILURE SUMMARY No transaction error was detected. WARNINGS There were no warnings during this operation. OPERATION PROGRESS STATUS * [25/06/2011 11:41:04] : Activation of _http://dl.google.com/update2/1.3.21.57/GoogleInstaller_en-GB.application?appguid%3D%7B8A69D345-D564-463C-AFF1-A69D9E530F96%7D%26iid%3D%7B26C55C3A-B26A-0484-FEDD-78443D269DA1%7D%26lang%3Den-GB%26browser%3D2%26usagestats%3D0%26appname%3DGoogle%2520Chrome%26needsadmin%3Dfalse%26installdataindex%3Ddefaultbrowser has started. ERROR DETAILS Following errors were detected during this operation. * [25/06/2011 11:41:04] System.IO.FileNotFoundException - The system cannot find the file specified. (Exception from HRESULT: 0x80070002) - Source: System.Deployment - Stack trace: at System.Deployment.Internal.Isolation.IsolationInterop.GetUserStore(UInt32 Flags, IntPtr hToken, Guid& riid) at System.Deployment.Application.ComponentStore..ctor(ComponentStoreType storeType, SubscriptionStore subStore) at System.Deployment.Application.SubscriptionStore..ctor(String deployPath, String tempPath, ComponentStoreType storeType) at System.Deployment.Application.SubscriptionStore.get_CurrentUser() at System.Deployment.Application.ApplicationActivator.PerformDeploymentActivation(Uri activationUri, Boolean isShortcut, String textualSubId, String deploymentProviderUrlFromExtension, BrowserSettings browserSettings, String& errorPageUrl) at System.Deployment.Application.ApplicationActivator.ActivateDeploymentWorker(Object state) COMPONENT STORE TRANSACTION DETAILS No transaction information is available.

  Read the article

• pam_ldap.so before pam_unix.so? Is it ever possible?

  - by user1075993

  we have a couple of servers with PAM+LDAP. The configuration is standard (see http://arthurdejong.org/nss-pam-ldapd/setup or http://wiki.debian.org/LDAP/PAM). For example, /etc/pam.d/common-auth contains: auth sufficient pam_unix.so nullok_secure auth requisite pam_succeed_if.so uid >= 1000 quiet auth sufficient pam_ldap.so use_first_pass auth requiered pam_deny.so And, of course, it works for both ldap and local users. But every login goes first to pam_unix.so, fails, and only then tries pam_ldap.so successfully. As a result, we have a well-known failure message for every single ldap user login: pam_unix(<some_service>:auth): authentication failure; logname= uid=0 euid=0 tty=ssh ruser= rhost=<some_host> user=<some_user> I have up to 60000 of such log messages per day and I want to change the configuration so, that PAM will try ldap authentication first, and only if it fails - try pam_unix.so (I think it can improve the i/o performance of the server). But if I change common-auth to the following: auth sufficient pam_ldap.so use_first_pass auth sufficient pam_unix.so nullok_secure auth requiered pam_deny.so Then I simply can't login anymore with local (non-ldap) user (e.g., via ssh). Does somebody knows the right configuration? Why Debian and nss-pam-ldapd have pam_unix.so at first by default? Is there really no way to change it? Thank you in advance. P.S. I don't want to disable logs, but want to set ldap authentication on the first place.

  Read the article

• Difference between all servers in one cluster and more than one cluster with servers?

  - by silla

  Not sure I understand what´s the difference or how it works when servers a running in one cluster or if there are more than one clusters with servers in it - regard High availability & Load Balancing. For me they are somehow the same, there is not really a big difference. Let´s make a simple example: 2 Servers in 1 Cluster 2 Clusters with each 1 Server - 1. If one Server failure, the other one is able to continue the work. The same for Load Balancing, these two Servers are able to balance the work together. - 2. The same thing! If one Server failure... The only thing that could be a problem with point 1. is if the Cluster fails (then both of the Server are dead). But is this even possible? I was reading stuff about clustering and high availability but I think I do not get this really. Probably I did not really understand how a cluster is working. Are these 2 points with 1 Cluster and 2 Clusters somehow the same or are there really some big differences? What should I know about it? Thank you

  Read the article

• Why am I getting a Sharepoint error on a simple "hello world" web page?

  - by Fetchez la vache

  I've been granted admin access to an internal IIS server on which I need to set up a web site. Before doing anything technical I wanted to ensure that I could access the server, but when attempting to access a simple page (that does not refer to Sharepoint) at http://localhost/index.html when logged onto the server directly, I am getting Parser Error Description: An error occurred during the parsing of a resource required to service this request. Please review the following specific parse error details and modify your source file appropriately. Parser Error Message: Could not load file or assembly 'Microsoft.SharePoint' or one of its dependencies. The system cannot find the file specified. Source Error: Line 1: <%@ Assembly Name="Microsoft.SharePoint"%><%@ Application Language="C#" Inherits="Microsoft.SharePoint.ApplicationRuntime.SPHttpApplication" %> Source File: /global.asax Line: 1 Assembly Load Trace: The following information can be helpful to determine why the assembly 'Microsoft.SharePoint' could not be loaded. WRN: Assembly binding logging is turned OFF. To enable assembly bind failure logging, set the registry value [HKLM\Software\Microsoft\Fusion!EnableLog] (DWORD) to 1. Note: There is some performance penalty associated with assembly bind failure logging. To turn this feature off, remove the registry value [HKLM\Software\Microsoft\Fusion!EnableLog]. -------------------------------------------------------------------------------- Version Information: Microsoft .NET Framework Version:2.0.50727.5456; ASP.NET Version:2.0.50727.5456 To be quite honest I know zip about Sharepoint, so why am I getting a sharepoint error on a basic "hello world" html page? Cheers :) Update: I've since supposedly uninstalled Sharepoint, but am still getting this error. Any ideas welcome!

  Read the article

• How to find the reason for a weekly downtime on an Ubuntu web server hosted by AWS?

  - by IceSheep

  We started monitoring our web server using Pingdom and found out that we have a downtime of a few minutes every Sunday at 0:00 UTC. The test runs every minute and checks if a successful HTTP response (code 200) is returned on port 80. The test fails due to a timeout (no response after 30 seconds). Here's what we've already checked – without success: Since we run our webserver behind a load balancer, I've set the Pingdom test on the load balancer's public DNS and the webserver's public DNS in order to find out if there's a problem with the AWS load balancer – both tests return the same result We set up Munin on our webserver. Everything looked fine even after the failure. Since the last failure lasted only 2 minutes I suppose Munin couldn't capture a potential problem (it only checks every 5 minutes) I have checked /var/log/apache2/error.log and /var/log/syslog for suspicious entries I have checked /etc/cron.weekly and /etc/crontab for suspicious entries I have searched for files created or last-modified during 0:00 and 0:15 using this method: touch -t 201209020000 start touch -t 201209020015 end find / -newer start -and ! -newer end (nothing found) Has anybody experienced a similar problem? Any proposals on how to find the reason for this behavior? It's Ubuntu 10.04 LTS running on an AWS m1.large instance. Thanks!

  Read the article

• TGT validation fails, but only for one user

  - by wzzrd

  I'm seeing the weirdest thing here. I have a couple of RHEL3, 4 and 5 machines that validate user credentials through Kerberos with an Active Directoy domain controller as their KDC. This works for all of my users, save one. There is one account that is unable to log into RHEL3 Linux machines and generates the following errors there: May 31 13:53:19 mybox sshd(pam_unix)[7186]: authentication failure; logname= uid=0 euid=0 tty=ssh ruser= rhost=10.0.0.1 user=user May 31 13:53:20 mybox sshd[7186]: pam_krb5: TGT verification failed for `user' May 31 13:53:20 mybox sshd[7186]: pam_krb5: authentication fails for `user' Other accounts, like my own, are fine: May 31 17:25:30 mybox sshd(pam_unix)[12913]: authentication failure; logname= uid=0 euid=0 tty=ssh ruser= rhost=10.0.0.1 user=myuser May 31 17:25:31 mybox sshd[12913]: pam_krb5: TGT for myuser successfully verified May 31 17:25:31 mybox sshd[12913]: pam_krb5: authentication succeeds for `myuser' May 31 17:25:31 mybox sshd(pam_unix)[12915]: session opened for user myuser by (uid=0) As you can see, TGT validation fails. This only happens for this specific account, not for any other. The failing useraccount's password has been reset, I inspected both user objects in Active Directory, but I see nothing out of the ordinary. If I have the failing useraccount log into a RHEL4 or 5 box, there is not problem, so it must be RHEL3 specific, but the fact that only one account suffers from this, alludes me. Maybe someone has seen this before?

  Read the article

• Localize WiX installer which uses the Firewall extension

  - by tronda

  I've got a WiX installer project which uses MSBuild to generate the MSI file. The WXS file includes the WiX firewall extension: xmlns:fire="http://schemas.microsoft.com/wix/FirewallExtension" I've defined two cultures in the MSBuild file with the following definition: <PropertyGroup> ... <Cultures>en-us;no-no</Cultures> </PropertyGroup> I've also added the translated resources: <ItemGroup> <EmbeddedResource Include="lang\Firewall_no-no.wxl" /> <EmbeddedResource Include="lang\WixUI_no-no.wxl" /> </ItemGroup> These represents translation to Norwegian for the Firewall extension and the WixUI extension. When I run the build it succeeds with the en-us part, but the no-no part fails with the following error messages: C:\delivery\Dev\wix30_public\src\ext\FirewallExtension\wixlib\FirewallExtension.wxs(19): error LGHT0102: The localization variable !(loc.WixSchedFirewallExceptionsInstall) is unknown. Please ensure the variable is defined. .... Couple of issues: I don't know where the C:\delivery directory comes from. I don't have such a directory. The localization variables referenced in the error message have been translated in the Firewall_no-no.wxl file. When I run MSBuild with more detailed information I see the following output right before the error message: Task "Light" Command: C:\Program Files (x86)\Windows Installer XML v3\bin\Light.exe -cultures:no-no -ext "C:\Program Files (x86)\Windows Installer XML v3\bin\WixUIExtension.dll" -ext "C:\Program Files (x86)\Windows I nstaller XML v3\bin\WixUtilExtension.dll" -ext "C:\Program Files (x86)\Windows Installer XML v3\bin\WixFirewallExtension.dll" -loc lang\Firewall_no-no.wxl -loc lang\WixUI_no-no.wxl -out F:\Projects\MyProd\MyProj\Installer\bin\Debug\no-no\MyInstaller.msi -pdbout F:\Projects\MyProd\MyProj\Installer\bin\Debug\no-no\MyInstaller.wixpdb obj\Debug\MyProj.wixobj As the details show, the MSBuild task results in having two -loc parameters to the Light executable. Not sure if that would be the reason for this problem. Any ideas on how to solve this?

  Read the article

• Suggestions for duplicate file finder algorithm (using C)

  - by Andrei Ciobanu

  Hello, I wanted to write a program that test if two files are duplicates (have exactly the same content). First I test if the files have the same sizes, and if they have i start to compare their contents. My first idea, was to "split" the files into fixed size blocks, then start a thread for every block, fseek to startup character of every block and continue the comparisons in parallel. When a comparison from a thread fails, the other working threads are canceled, and the program exits out of the thread spawning loop. The code looks like this: dupf.h #ifndef __NM__DUPF__H__ #define __NM__DUPF__H__ #define NUM_THREADS 15 #define BLOCK_SIZE 8192 /* Thread argument structure */ struct thread_arg_s { const char *name_f1; /* First file name */ const char *name_f2; /* Second file name */ int cursor; /* Where to seek in the file */ }; typedef struct thread_arg_s thread_arg; /** * 'arg' is of type thread_arg. * Checks if the specified file blocks are * duplicates. */ void *check_block_dup(void *arg); /** * Checks if two files are duplicates */ int check_dup(const char *name_f1, const char *name_f2); /** * Returns a valid pointer to a file. * If the file (given by the path/name 'fname') cannot be opened * in 'mode', the program is interrupted an error message is shown. **/ FILE *safe_fopen(const char *name, const char *mode); #endif dupf.c #include <errno.h> #include <pthread.h> #include <stdio.h> #include <stdlib.h> #include <string.h> #include <sys/types.h> #include <sys/stat.h> #include <unistd.h> #include "dupf.h" FILE *safe_fopen(const char *fname, const char *mode) { FILE *f = NULL; f = fopen(fname, mode); if (f == NULL) { char emsg[255]; sprintf(emsg, "FOPEN() %s\t", fname); perror(emsg); exit(-1); } return (f); } void *check_block_dup(void *arg) { const char *name_f1 = NULL, *name_f2 = NULL; /* File names */ FILE *f1 = NULL, *f2 = NULL; /* Streams */ int cursor = 0; /* Reading cursor */ char buff_f1[BLOCK_SIZE], buff_f2[BLOCK_SIZE]; /* Character buffers */ int rchars_1, rchars_2; /* Readed characters */ /* Initializing variables from 'arg' */ name_f1 = ((thread_arg*)arg)->name_f1; name_f2 = ((thread_arg*)arg)->name_f2; cursor = ((thread_arg*)arg)->cursor; /* Opening files */ f1 = safe_fopen(name_f1, "r"); f2 = safe_fopen(name_f2, "r"); /* Setup cursor in files */ fseek(f1, cursor, SEEK_SET); fseek(f2, cursor, SEEK_SET); /* Initialize buffers */ rchars_1 = fread(buff_f1, 1, BLOCK_SIZE, f1); rchars_2 = fread(buff_f2, 1, BLOCK_SIZE, f2); if (rchars_1 != rchars_2) { /* fread failed to read the same portion. * program cannot continue */ perror("ERROR WHEN READING BLOCK"); exit(-1); } while (rchars_1-->0) { if (buff_f1[rchars_1] != buff_f2[rchars_1]) { /* Different characters */ fclose(f1); fclose(f2); pthread_exit("notdup"); } } /* Close streams */ fclose(f1); fclose(f2); pthread_exit("dup"); } int check_dup(const char *name_f1, const char *name_f2) { int num_blocks = 0; /* Number of 'blocks' to check */ int num_tsp = 0; /* Number of threads spawns */ int tsp_iter = 0; /* Iterator for threads spawns */ pthread_t *tsp_threads = NULL; thread_arg *tsp_threads_args = NULL; int tsp_threads_iter = 0; int thread_c_res = 0; /* Thread creation result */ int thread_j_res = 0; /* Thread join res */ int loop_res = 0; /* Function result */ int cursor; struct stat buf_f1; struct stat buf_f2; if (name_f1 == NULL || name_f2 == NULL) { /* Invalid input parameters */ perror("INVALID FNAMES\t"); return (-1); } if (stat(name_f1, &buf_f1) != 0 || stat(name_f2, &buf_f2) != 0) { /* Stat fails */ char emsg[255]; sprintf(emsg, "STAT() ERROR: %s %s\t", name_f1, name_f2); perror(emsg); return (-1); } if (buf_f1.st_size != buf_f2.st_size) { /* File have different sizes */ return (1); } /* Files have the same size, function exec. is continued */ num_blocks = (buf_f1.st_size / BLOCK_SIZE) + 1; num_tsp = (num_blocks / NUM_THREADS) + 1; cursor = 0; for (tsp_iter = 0; tsp_iter < num_tsp; tsp_iter++) { loop_res = 0; /* Create threads array for this spawn */ tsp_threads = malloc(NUM_THREADS * sizeof(*tsp_threads)); if (tsp_threads == NULL) { perror("TSP_THREADS ALLOC FAILURE\t"); return (-1); } /* Create arguments for every thread in the current spawn */ tsp_threads_args = malloc(NUM_THREADS * sizeof(*tsp_threads_args)); if (tsp_threads_args == NULL) { perror("TSP THREADS ARGS ALLOCA FAILURE\t"); return (-1); } /* Initialize arguments and create threads */ for (tsp_threads_iter = 0; tsp_threads_iter < NUM_THREADS; tsp_threads_iter++) { if (cursor >= buf_f1.st_size) { break; } tsp_threads_args[tsp_threads_iter].name_f1 = name_f1; tsp_threads_args[tsp_threads_iter].name_f2 = name_f2; tsp_threads_args[tsp_threads_iter].cursor = cursor; thread_c_res = pthread_create( &tsp_threads[tsp_threads_iter], NULL, check_block_dup, (void*)&tsp_threads_args[tsp_threads_iter]); if (thread_c_res != 0) { perror("THREAD CREATION FAILURE"); return (-1); } cursor+=BLOCK_SIZE; } /* Join last threads and get their status */ while (tsp_threads_iter-->0) { void *thread_res = NULL; thread_j_res = pthread_join(tsp_threads[tsp_threads_iter], &thread_res); if (thread_j_res != 0) { perror("THREAD JOIN FAILURE"); return (-1); } if (strcmp((char*)thread_res, "notdup")==0) { loop_res++; /* Closing other threads and exiting by condition * from loop. */ while (tsp_threads_iter-->0) { pthread_cancel(tsp_threads[tsp_threads_iter]); } } } free(tsp_threads); free(tsp_threads_args); if (loop_res > 0) { break; } } return (loop_res > 0) ? 1 : 0; } The function works fine (at least for what I've tested). Still, some guys from #C (freenode) suggested that the solution is overly complicated, and it may perform poorly because of parallel reading on hddisk. What I want to know: Is the threaded approach flawed by default ? Is fseek() so slow ? Is there a way to somehow map the files to memory and then compare them ?

  Read the article

• The Benefits of Smart Grid Business Software

  - by Sylvie MacKenzie, PMP

  Smart Grid Background What Are Smart Grids?Smart Grids use computer hardware and software, sensors, controls, and telecommunications equipment and services to: Link customers to information that helps them manage consumption and use electricity wisely. Enable customers to respond to utility notices in ways that help minimize the duration of overloads, bottlenecks, and outages. Provide utilities with information that helps them improve performance and control costs. What Is Driving Smart Grid Development? Environmental ImpactSmart Grid development is picking up speed because of the widespread interest in reducing the negative impact that energy use has on the environment. Smart Grids use technology to drive efficiencies in transmission, distribution, and consumption. As a result, utilities can serve customers’ power needs with fewer generating plants, fewer transmission and distribution assets,and lower overall generation. With the possible exception of wind farm sprawl, landscape preservation is one obvious benefit. And because most generation today results in greenhouse gas emissions, Smart Grids reduce air pollution and the potential for global climate change.Smart Grids also more easily accommodate the technical difficulties of integrating intermittent renewable resources like wind and solar into the grid, providing further greenhouse gas reductions. CostsThe ability to defer the cost of plant and grid expansion is a major benefit to both utilities and customers. Utilities do not need to use as many internal resources for traditional infrastructure project planning and management. Large T&D infrastructure expansion costs are not passed on to customers.Smart Grids will not eliminate capital expansion, of course. Transmission corridors to connect renewable generation with customers will require major near-term expenditures. Additionally, in the future, electricity to satisfy the needs of population growth and additional applications will exceed the capacity reductions available through the Smart Grid. At that point, expansion will resume—but with greater overall T&D efficiency based on demand response, load control, and many other Smart Grid technologies and business processes. Energy efficiency is a second area of Smart Grid cost saving of particular relevance to customers. The timely and detailed information Smart Grids provide encourages customers to limit waste, adopt energy-efficient building codes and standards, and invest in energy efficient appliances. Efficiency may or may not lower customer bills because customer efficiency savings may be offset by higher costs in generation fuels or carbon taxes. It is clear, however, that bills will be lower with efficiency than without it. Utility Operations Smart Grids can serve as the central focus of utility initiatives to improve business processes. Many utilities have long “wish lists” of projects and applications they would like to fund in order to improve customer service or ease staff’s burden of repetitious work, but they have difficulty cost-justifying the changes, especially in the short term. Adding Smart Grid benefits to the cost/benefit analysis frequently tips the scales in favor of the change and can also significantly reduce payback periods.Mobile workforce applications and asset management applications work together to deploy assets and then to maintain, repair, and replace them. Many additional benefits result—for instance, increased productivity and fuel savings from better routing. Similarly, customer portals that provide customers with near-real-time information can also encourage online payments, thus lowering billing costs. Utilities can and should include these cost and service improvements in the list of Smart Grid benefits. What Is Smart Grid Business Software? Smart Grid business software gathers data from a Smart Grid and uses it improve a utility’s business processes. Smart Grid business software also helps utilities provide relevant information to customers who can then use it to reduce their own consumption and improve their environmental profiles. Smart Grid Business Software Minimizes the Impact of Peak Demand Utilities must size their assets to accommodate their highest peak demand. The higher the peak rises above base demand: The more assets a utility must build that are used only for brief periods—an inefficient use of capital. The higher the utility’s risk profile rises given the uncertainties surrounding the time needed for permitting, building, and recouping costs. The higher the costs for utilities to purchase supply, because generators can charge more for contracts and spot supply during high-demand periods. Smart Grids enable a variety of programs that reduce peak demand, including: Time-of-use pricing and critical peak pricing—programs that charge customers more when they consume electricity during peak periods. Pilot projects indicate that these programs are successful in flattening peaks, thus ensuring better use of existing T&D and generation assets. Direct load control, which lets utilities reduce or eliminate electricity flow to customer equipment (such as air conditioners). Contracts govern the terms and conditions of these turn-offs. Indirect load control, which signals customers to reduce the use of on-premises equipment for contractually agreed-on time periods. Smart Grid business software enables utilities to impose penalties on customers who do not comply with their contracts. Smart Grids also help utilities manage peaks with existing assets by enabling: Real-time asset monitoring and control. In this application, advanced sensors safely enable dynamic capacity load limits, ensuring that all grid assets can be used to their maximum capacity during peak demand periods. Real-time asset monitoring and control applications also detect the location of excessive losses and pinpoint need for mitigation and asset replacements. As a result, utilities reduce outage risk and guard against excess capacity or “over-build”. Better peak demand analysis. As a result: Distribution planners can better size equipment (e.g. transformers) to avoid over-building. Operations engineers can identify and resolve bottlenecks and other inefficiencies that may cause or exacerbate peaks. As above, the result is a reduction in the tendency to over-build. Supply managers can more closely match procurement with delivery. As a result, they can fine-tune supply portfolios, reducing the tendency to over-contract for peak supply and reducing the need to resort to spot market purchases during high peaks. Smart Grids can help lower the cost of remaining peaks by: Standardizing interconnections for new distributed resources (such as electricity storage devices). Placing the interconnections where needed to support anticipated grid congestion. Smart Grid Business Software Lowers the Cost of Field Services By processing Smart Grid data through their business software, utilities can reduce such field costs as: Vegetation management. Smart Grids can pinpoint momentary interruptions and tree-caused outages. Spatial mash-up tools leverage GIS models of tree growth for targeted vegetation management. This reduces the cost of unnecessary tree trimming. Service vehicle fuel. Many utility service calls are “false alarms.” Checking meter status before dispatching crews prevents many unnecessary “truck rolls.” Similarly, crews use far less fuel when Smart Grid sensors can pinpoint a problem and mobile workforce applications can then route them directly to it. Smart Grid Business Software Ensures Regulatory Compliance Smart Grids can ensure compliance with private contracts and with regional, national, or international requirements by: Monitoring fulfillment of contract terms. Utilities can use one-hour interval meters to ensure that interruptible (“non-core”) customers actually reduce or eliminate deliveries as required. They can use the information to levy fines against contract violators. Monitoring regulations imposed on customers, such as maximum use during specific time periods. Using accurate time-stamped event history derived from intelligent devices distributed throughout the smart grid to monitor and report reliability statistics and risk compliance. Automating business processes and activities that ensure compliance with security and reliability measures (e.g. NERC-CIP 2-9). Grid Business Software Strengthens Utilities’ Connection to Customers While Reducing Customer Service Costs During outages, Smart Grid business software can: Identify outages more quickly. Software uses sensors to pinpoint outages and nested outage locations. They also permit utilities to ensure outage resolution at every meter location. Size outages more accurately, permitting utilities to dispatch crews that have the skills needed, in appropriate numbers. Provide updates on outage location and expected duration. This information helps call centers inform customers about the timing of service restoration. Smart Grids also facilitates display of outage maps for customer and public-service use. Smart Grids can significantly reduce the cost to: Connect and disconnect customers. Meters capable of remote disconnect can virtually eliminate the costs of field crews and vehicles previously required to change service from the old to the new residents of a metered property or disconnect customers for nonpayment. Resolve reports of voltage fluctuation. Smart Grids gather and report voltage and power quality data from meters and grid sensors, enabling utilities to pinpoint reported problems or resolve them before customers complain. Detect and resolve non-technical losses (e.g. theft). Smart Grids can identify illegal attempts to reconnect meters or to use electricity in supposedly vacant premises. They can also detect theft by comparing flows through delivery assets with billed consumption. Smart Grids also facilitate outreach to customers. By monitoring and analyzing consumption over time, utilities can: Identify customers with unusually high usage and contact them before they receive a bill. They can also suggest conservation techniques that might help to limit consumption. This can head off “high bill” complaints to the contact center. Note that such “high usage” or “additional charges apply because you are out of range” notices—frequently via text messaging—are already common among mobile phone providers. Help customers identify appropriate bill payment alternatives (budget billing, prepayment, etc.). Help customers find and reduce causes of over-consumption. There’s no waiting for bills in the mail before they even understand there is a problem. Utilities benefit not just through improved customer relations but also through limiting the size of bills from customers who might struggle to pay them. Where permitted, Smart Grids can open the doors to such new utility service offerings as: Monitoring properties. Landlords reduce costs of vacant properties when utilities notify them of unexpected energy or water consumption. Utilities can perform similar services for owners of vacation properties or the adult children of aging parents. Monitoring equipment. Power-use patterns can reveal a need for equipment maintenance. Smart Grids permit utilities to alert owners or managers to a need for maintenance or replacement. Facilitating home and small-business networks. Smart Grids can provide a gateway to equipment networks that automate control or let owners access equipment remotely. They also facilitate net metering, offering some utilities a path toward involvement in small-scale solar or wind generation. Prepayment plans that do not need special meters. Smart Grid Business Software Helps Customers Control Energy Costs There is no end to the ways Smart Grids help both small and large customers control energy costs. For instance: Multi-premises customers appreciate having all meters read on the same day so that they can more easily compare consumption at various sites. Customers in competitive regions can match their consumption profile (detailed via Smart Grid data) with specific offerings from competitive suppliers. Customers seeing inexplicable consumption patterns and power quality problems may investigate further. The result can be discovery of electrical problems that can be resolved through rewiring or maintenance—before more serious fires or accidents happen. Smart Grid Business Software Facilitates Use of Renewables Generation from wind and solar resources is a popular alternative to fossil fuel generation, which emits greenhouse gases. Wind and solar generation may also increase energy security in regions that currently import fossil fuel for use in generation. Utilities face many technical issues as they attempt to integrate intermittent resource generation into traditional grids, which traditionally handle only fully dispatchable generation. Smart Grid business software helps solves many of these issues by: Detecting sudden drops in production from renewables-generated electricity (wind and solar) and automatically triggering electricity storage and smart appliance response to compensate as needed. Supporting industry-standard distributed generation interconnection processes to reduce interconnection costs and avoid adding renewable supplies to locations already subject to grid congestion. Facilitating modeling and monitoring of locally generated supply from renewables and thus helping to maximize their use. Increasing the efficiency of “net metering” (through which utilities can use electricity generated by customers) by: Providing data for analysis. Integrating the production and consumption aspects of customer accounts. During non-peak periods, such techniques enable utilities to increase the percent of renewable generation in their supply mix. During peak periods, Smart Grid business software controls circuit reconfiguration to maximize available capacity. Conclusion Utility missions are changing. Yesterday, they focused on delivery of reasonably priced energy and water. Tomorrow, their missions will expand to encompass sustainable use and environmental improvement.Smart Grids are key to helping utilities achieve this expanded mission. But they come at a relatively high price. Utilities will need to invest heavily in new hardware, software, business process development, and staff training. Customer investments in home area networks and smart appliances will be large. Learning to change the energy and water consumption habits of a lifetime could ultimately prove even more formidable tasks.Smart Grid business software can ease the cost and difficulties inherent in a needed transition to a more flexible, reliable, responsive electricity grid. Justifying its implementation, however, requires a full understanding of the benefits it brings—benefits that can ultimately help customers, utilities, communities, and the world address global issues like energy security and climate change while minimizing costs and maximizing customer convenience. This white paper is available for download here. For further information about Oracle's Primavera Solutions for Utilities, please read our Utilities e-book.

  Read the article

• Project Management Helps AmeriCares Deliver International Aid

  - by Sylvie MacKenzie, PMP

  Excerpt from PROFIT - ORACLE - by Alison Weiss Handle with Care Sound project management helps AmeriCares bring international aid to those in need. The stakes are always high for AmeriCares. On a mission to restore health and save lives during times of disaster, the nonprofit international relief and humanitarian aid organization delivers donated medicines, medical supplies, and humanitarian aid to people in the U.S. and around the globe. Founded in 1982 with the express mission of responding as quickly and efficiently as possible to help people in need, the Stamford, Connecticut-based AmeriCares has delivered more than US$10.5 billion in aid to 147 countries over the past three decades. Launch the Slideshow “It’s critically important to us that we steward all the donations and that the medical supplies and medicines get to people as quickly as possible with no loss,” says Kate Sears, senior vice president for finance and technology at AmeriCares. “Whether we’re shipping IV solutions to victims of cholera in Haiti or antibiotics to Somali famine victims, we need to get the medicines there sooner because it means more people will be helped and lives improved or even saved.” Ten years ago, the tracking systems used by AmeriCares associates were paper-based. In recent years, staff started using spreadsheets, but the tracking processes were not standardized between teams. “Every team was tracking completely different information,” says Megan McDermott, senior associate, Sub-Saharan Africa partnerships, at AmeriCares. “It was just a few key things. For example, we tracked the date a shipment was supposed to arrive and the date we got reports from our partner that a hospital received aid on their end.” While the data was accurate, much detail was being lost in the process. AmeriCares management knew it could do a better job of tracking this enterprise data and in 2011 took a significant step by implementing Oracle’s Primavera P6 Professional Project Management. “It’s a comprehensive solution that has helped us improve the monitoring and controlling processes. It has allowed us to do our distribution better,” says Sears. In addition, the implementation effort has been a change agent, helping AmeriCares leadership rethink project management across the entire organization. Initially, much of the focus was on standardizing processes, but staff members also learned the importance of thinking proactively to prevent possible problems and evaluating results to determine if goals and objectives are truly being met. Such data about process efficiency and overall results is critical not only to AmeriCares staff but also to the donors supporting the organization’s life-saving missions. Efficiency Saves Lives One of AmeriCares’ core operations is to gather product donations from the private sector, establish where the most-urgent needs are, and solicit monetary support to send the aid via ocean cargo or airlift to welfare- and health-oriented nongovernmental organizations, hospitals, health networks, and government ministries based in areas in need. In 2011 alone, AmeriCares sent more than 3,500 shipments to 95 countries in response to both ongoing humanitarian needs and more than two dozen emergencies, including deadly tornadoes and storms in the U.S. and the devastating tsunami in Japan. When it comes to nonprofits in general, donors want to know that the charitable organizations they support are using funds wisely. Typically, nonprofits are evaluated by donors in terms of efficiency, an area where AmeriCares has an excellent reputation: 98 percent of expenses go directly to supporting programs and less than 2 percent represent administrative and fundraising costs. Donors, however, should look at more than simple efficiency, says Peter York, senior partner and chief research and learning officer at TCC Group, a nonprofit consultancy headquartered in New York, New York. They should also look at whether organizations have the systems in place to sustain their missions and continue to thrive. An expert on nonprofit organizational management, York has spent years studying sustainable charitable organizations. He defines them as nonprofits that are able to achieve the ongoing financial support to stay relevant and continue doing core mission work. In his analysis of well over 2,500 larger nonprofits, York has found that many are not sustaining, and are actually scaling back in size. “One of the biggest challenges of nonprofit sustainability is the general public’s perception that every dollar donated has to go only to the delivery of service,” says York. “What our data shows is that there are some fundamental capacities that have to be there in order for organizations to sustain and grow.” York’s research highlights the importance of data-driven leadership at successful nonprofits. “You’ve got to have the tools, the systems, and the technologies to get objective information on what you do, the people you serve, and the results you’re achieving,” says York. “If leaders don’t have the knowledge and the data, they can’t make the strategic decisions about programs to take organizations to the next level.” Historically, AmeriCares associates have used time-tested and cost-effective strategies to ship and then track supplies from donation to delivery to their destinations in designated time frames. When disaster strikes, AmeriCares ships by air and generally pulls out all the stops to deliver the most urgently needed aid within the first few days and weeks. Then, as situations stabilize, AmeriCares turns to delivering sea containers for the postemergency and ongoing aid so often needed over the long term. According to McDermott, getting a shipment out the door is fairly complicated, requiring as many as five different AmeriCares teams collaborating together. The entire process can take months—from when products are received in the warehouse and deciding which recipients to allocate supplies to, to getting customs and governmental approvals in place, actually shipping products, and finally ensuring that the products are received in-country. Delivering that aid is no small affair. “Our volume exceeds half a billion dollars a year worth of donated medicines and medical supplies, so it’s a sizable logistical operation to bring these products in and get them out to the right place quickly to have the most impact,” says Sears. “We really pride ourselves on our controls and efficiencies.” Adding to that complexity is the fact that the longer it takes to deliver aid, the more dire the human need can be. Any time AmeriCares associates can shave off the complicated aid delivery process can translate into lives saved. “It’s really being able to track information consistently that will help us to see where are the bottlenecks and where can we work on improving our processes,” says McDermott. Setting a Standard Productivity and information management improvements were key objectives for AmeriCares when staff began the process of implementing Oracle’s Primavera solution. But before configuring the software, the staff needed to take the time to analyze the systems already in place. According to Greg Loop, manager of database systems at AmeriCares, the organization received guidance from several consultants, including Rich D’Addario, consulting project manager in the Primavera Global Business Unit at Oracle, who was instrumental in shepherding the critical requirements-gathering phase. D’Addario encouraged staff to begin documenting shipping processes by considering the order in which activities occur and which ones are dependent on others to get accomplished. This exercise helped everyone realize that to be more efficient, they needed to keep track of shipments in a more standard way. “The staff didn’t recognize formal project management methodology,” says D’Addario. “But they did understand what the most important things are and that if they go wrong, an entire project can go off course.” Before, if a boatload of supplies was being sent to Haiti and there was a problem somewhere, a lot of time was taken up finding out where the problem was—because staff was not tracking things in a standard way. As a result, even more time was needed to find possible solutions to the problem and alert recipients that the aid might be delayed. “For everyone to put on the project manager hat and standardize the way every single thing is done means that now the whole organization is on the same page as to what needs to occur from the time a hurricane hits Haiti and when a boat pulls in to unload supplies,” says D’Addario. With so much care taken to put a process foundation firmly in place, configuring the Primavera solution was actually quite simple. Specific templates were set up for different types of shipments, and dashboards were implemented to provide executives with clear overviews of every project in the system. AmeriCares’ Loop reports that system planning, refining, and testing, followed by writing up documentation and training, took approximately four months. The system went live in spring 2011 at AmeriCares’ Connecticut headquarters. While the nonprofit has an international presence, with warehouses in Europe and offices in Haiti, India, Japan, and Sri Lanka, most donated medicines come from U.S. entities and are shipped from the U.S. out to the rest of the world. In addition, all shipments are tracked from the U.S. office. AmeriCares doesn’t expect the Primavera system to take months off the shipping time, especially for sea containers. However, any time saved is still important because it will allow aid to be delivered to people more quickly at a lower overall cost. “If we can trim a day or two here or there, that can translate into lives that we’re saving, especially in emergency situations,” says Sears. A Cultural Change Beyond the measurable benefits that come with IT-driven process improvement, AmeriCares management is seeing a change in culture as a result of the Primavera project. One change has been treating every shipment of aid as a project, and everyone involved with facilitating shipments as a project manager. “This is a revolutionary concept for us,” says McDermott. “Before, we were used to thinking we were doing logistics—getting a container from point A to point B without looking at it as one project and really understanding what it meant to manage it.” AmeriCares staff is also happy to report that collaboration within the organization is much more efficient. When someone creates a shipment in the Primavera system, the same shared template is used, which means anyone can log in to the system to see the status of a shipment. Knowledgeable staff can access a shipment project to help troubleshoot a problem. Management can easily check the status of projects across the organization. “Dashboards are really useful,” says McDermott. “Instead of going into the details of each project, you can just see the high-level real-time information at a glance.” The new system is helping team members focus on proactively managing shipments rather than simply reacting when problems occur. For example, when a container is shipped, documents must be included for customs clearance. Now, the shipping template has built-in reminders to prompt team members to ask for copies of these documents from freight forwarders and to follow up with partners to discover if a shipment is on time. In the past, staff may not have worked on securing these documents until they’d been notified a shipment had arrived in-country. Another benefit of capturing and adopting best practices within the Primavera system is that staff training is easier. “Capturing the processes in documented steps and milestones allows us to teach new staff members how to do their jobs faster,” says Sears. “It provides them with the knowledge of their predecessors so they don’t have to keep reinventing the wheel.” With the Primavera system already generating positive results, management is eager to take advantage of advanced capabilities. Loop is working on integrating the company’s proprietary inventory management system with the Primavera system so that when logistics or warehousing operators input data, the information will automatically go into the Primavera system. In the past, this information had to be manually keyed into spreadsheets, often leading to errors. Mining Historical Data Another feature on the horizon for AmeriCares is utilizing Primavera P6 Professional Project Management reporting capabilities. As the system begins to include more historical data, management soon will be able to draw on this information to conduct analysis that has not been possible before and create customized reports. For example, at the beginning of the shipment process, staff will be able to use historical data to more accurately estimate how long the approval process should take for a particular country. This could help ensure that food and medicine with limited shelf lives do not get stuck in customs or used beyond their expiration dates. The historical data in the Primavera system will also help AmeriCares with better planning year to year. The nonprofit’s staff has always put together a plan at the beginning of the year, but this has been very challenging simply because it is impossible to predict disasters. Now, management will be able to look at historical data and see trends and statistics as they set current objectives and prepare for future need. In addition, this historical data will provide AmeriCares management with the ability to review year-end data and compare actual project results with goals set at the beginning of the year—to see if desired outcomes were achieved and if there are areas that need improvement. It’s this type of information that is so valuable to donors. And, according to York, project management software can play a critical role in generating the data to help nonprofits sustain and grow. “It is important to invest in systems to help replicate, expand, and deliver services,” says York. “Project management software can help because it encourages nonprofits to examine program or service changes and how to manage moving forward.” Sears believes that AmeriCares donors will support the return on investment the organization will achieve with the Primavera solution. “It won’t be financial returns, but rather how many more people we can help for a given dollar or how much more quickly we can respond to a need,” says Sears. “I think donors are receptive to such arguments.” And for AmeriCares, it is all about the future and increasing results. The project management environment currently may be quite simple, but IT staff plans to expand the complexity and functionality as the organization grows in its knowledge of project management and the goals it wants to achieve. “As we use the system over time, we’ll continue to refine our best practices and accumulate more data,” says Sears. “It will advance our ability to make better data-driven decisions.”

  Read the article

• Radius Authorization against ActiveDirectory and the users file

  - by mohrphium

  I have a problem with my freeradius server configuration. I want to be able to authenticate users against Windows ActiveDirectory (2008 R2) and the users file, because some of my co-workers are not listed in AD. We use the freeradius server to authenticate WLAN users. (PEAP/MSCHAPv2) AD Authentication works great, but I still have problems with the /etc/freeradius/users file When I run freeradius -X -x I get the following: Mon Jul 2 09:15:58 2012 : Info: ++++[chap] returns noop Mon Jul 2 09:15:58 2012 : Info: ++++[mschap] returns noop Mon Jul 2 09:15:58 2012 : Info: [suffix] No '@' in User-Name = "testtest", looking up realm NULL Mon Jul 2 09:15:58 2012 : Info: [suffix] Found realm "NULL" Mon Jul 2 09:15:58 2012 : Info: [suffix] Adding Stripped-User-Name = "testtest" Mon Jul 2 09:15:58 2012 : Info: [suffix] Adding Realm = "NULL" Mon Jul 2 09:15:58 2012 : Info: [suffix] Authentication realm is LOCAL. Mon Jul 2 09:15:58 2012 : Info: ++++[suffix] returns ok Mon Jul 2 09:15:58 2012 : Info: [eap] EAP packet type response id 1 length 13 Mon Jul 2 09:15:58 2012 : Info: [eap] No EAP Start, assuming it's an on-going EAP conversation Mon Jul 2 09:15:58 2012 : Info: ++++[eap] returns updated Mon Jul 2 09:15:58 2012 : Info: [files] users: Matched entry testtest at line 1 Mon Jul 2 09:15:58 2012 : Info: ++++[files] returns ok Mon Jul 2 09:15:58 2012 : Info: ++++[expiration] returns noop Mon Jul 2 09:15:58 2012 : Info: ++++[logintime] returns noop Mon Jul 2 09:15:58 2012 : Info: [pap] WARNING: Auth-Type already set. Not setting to PAP Mon Jul 2 09:15:58 2012 : Info: ++++[pap] returns noop Mon Jul 2 09:15:58 2012 : Info: +++- else else returns updated Mon Jul 2 09:15:58 2012 : Info: ++- else else returns updated Mon Jul 2 09:15:58 2012 : Info: Found Auth-Type = EAP Mon Jul 2 09:15:58 2012 : Info: # Executing group from file /etc/freeradius/sites-enabled/default Mon Jul 2 09:15:58 2012 : Info: +- entering group authenticate {...} Mon Jul 2 09:15:58 2012 : Info: [eap] EAP Identity Mon Jul 2 09:15:58 2012 : Info: [eap] processing type tls Mon Jul 2 09:15:58 2012 : Info: [tls] Initiate Mon Jul 2 09:15:58 2012 : Info: [tls] Start returned 1 Mon Jul 2 09:15:58 2012 : Info: ++[eap] returns handled Sending Access-Challenge of id 199 to 192.168.61.11 port 3072 EAP-Message = 0x010200061920 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x85469e2a854487589fb1196910cb8ae3 Mon Jul 2 09:15:58 2012 : Info: Finished request 125. Mon Jul 2 09:15:58 2012 : Debug: Going to the next request Mon Jul 2 09:15:58 2012 : Debug: Waking up in 2.4 seconds. After that it repeats the login attempt and at some point tries to authenticate against ActiveDirectory with ntlm, which doesn't work since the user exists only in the users file. Can someone help me out here? Thanks. PS: Hope this helps, freeradius trying to auth against AD: Mon Jul 2 09:15:58 2012 : Info: ++[chap] returns noop Mon Jul 2 09:15:58 2012 : Info: ++[mschap] returns noop Mon Jul 2 09:15:58 2012 : Info: [suffix] No '@' in User-Name = "testtest", looking up realm NULL Mon Jul 2 09:15:58 2012 : Info: [suffix] Found realm "NULL" Mon Jul 2 09:15:58 2012 : Info: [suffix] Adding Stripped-User-Name = "testtest" Mon Jul 2 09:15:58 2012 : Info: [suffix] Adding Realm = "NULL" Mon Jul 2 09:15:58 2012 : Info: [suffix] Authentication realm is LOCAL. Mon Jul 2 09:15:58 2012 : Info: ++[suffix] returns ok Mon Jul 2 09:15:58 2012 : Info: ++[control] returns ok Mon Jul 2 09:15:58 2012 : Info: [eap] EAP packet type response id 7 length 67 Mon Jul 2 09:15:58 2012 : Info: [eap] No EAP Start, assuming it's an on-going EAP conversation Mon Jul 2 09:15:58 2012 : Info: ++[eap] returns updated Mon Jul 2 09:15:58 2012 : Info: [files] users: Matched entry testtest at line 1 Mon Jul 2 09:15:58 2012 : Info: ++[files] returns ok Mon Jul 2 09:15:58 2012 : Info: ++[smbpasswd] returns notfound Mon Jul 2 09:15:58 2012 : Info: ++[expiration] returns noop Mon Jul 2 09:15:58 2012 : Info: ++[logintime] returns noop Mon Jul 2 09:15:58 2012 : Info: [pap] WARNING: Auth-Type already set. Not setting to PAP Mon Jul 2 09:15:58 2012 : Info: ++[pap] returns noop Mon Jul 2 09:15:58 2012 : Info: Found Auth-Type = EAP Mon Jul 2 09:15:58 2012 : Info: # Executing group from file /etc/freeradius/sites-enabled/inner-tunnel Mon Jul 2 09:15:58 2012 : Info: +- entering group authenticate {...} Mon Jul 2 09:15:58 2012 : Info: [eap] Request found, released from the list Mon Jul 2 09:15:58 2012 : Info: [eap] EAP/mschapv2 Mon Jul 2 09:15:58 2012 : Info: [eap] processing type mschapv2 Mon Jul 2 09:15:58 2012 : Info: [mschapv2] # Executing group from file /etc/freeradius/sites-enabled/inner-tunnel Mon Jul 2 09:15:58 2012 : Info: [mschapv2] +- entering group MS-CHAP {...} Mon Jul 2 09:15:58 2012 : Info: [mschap] Creating challenge hash with username: testtest Mon Jul 2 09:15:58 2012 : Info: [mschap] Told to do MS-CHAPv2 for testtest with NT-Password Mon Jul 2 09:15:58 2012 : Info: [mschap] expand: --username=%{mschap:User-Name:-None} -> --username=testtest Mon Jul 2 09:15:58 2012 : Info: [mschap] No NT-Domain was found in the User-Name. Mon Jul 2 09:15:58 2012 : Info: [mschap] expand: %{mschap:NT-Domain} -> Mon Jul 2 09:15:58 2012 : Info: [mschap] ... expanding second conditional Mon Jul 2 09:15:58 2012 : Info: [mschap] expand: --domain=%{%{mschap:NT-Domain}:-AD.CXO.NAME} -> --domain=AD.CXO.NAME Mon Jul 2 09:15:58 2012 : Info: [mschap] mschap2: 82 Mon Jul 2 09:15:58 2012 : Info: [mschap] Creating challenge hash with username: testtest Mon Jul 2 09:15:58 2012 : Info: [mschap] expand: --challenge=%{mschap:Challenge:-00} -> --challenge=dd441972f987d68b Mon Jul 2 09:15:58 2012 : Info: [mschap] expand: --nt-response=%{mschap:NT-Response:-00} -> --nt-response=7e6c537cd5c26093789cf7831715d378e16ea3e6c5b1f579 Mon Jul 2 09:15:58 2012 : Debug: Exec-Program output: Logon failure (0xc000006d) Mon Jul 2 09:15:58 2012 : Debug: Exec-Program-Wait: plaintext: Logon failure (0xc000006d) Mon Jul 2 09:15:58 2012 : Debug: Exec-Program: returned: 1 Mon Jul 2 09:15:58 2012 : Info: [mschap] External script failed. Mon Jul 2 09:15:58 2012 : Info: [mschap] FAILED: MS-CHAP2-Response is incorrect Mon Jul 2 09:15:58 2012 : Info: ++[mschap] returns reject Mon Jul 2 09:15:58 2012 : Info: [eap] Freeing handler Mon Jul 2 09:15:58 2012 : Info: ++[eap] returns reject Mon Jul 2 09:15:58 2012 : Info: Failed to authenticate the user. Mon Jul 2 09:15:58 2012 : Auth: Login incorrect (mschap: External script says Logon failure (0xc000006d)): [testtest] (from client techap01 port 0 via TLS tunnel) PPS: Maybe the problem is located here: In /etc/freeradius/modules/ntlm_auth I have set ntlm to: program = "/usr/bin/ntlm_auth --request-nt-key --domain=AD.CXO.NAME --username=%{mschap:User-Name} --password=%{User-Password}" I need this, so users can login without adding @ad.cxo.name to their usernames. But how can I tell freeradius to try both logins, [email protected] (should fail) testtest (against users file - should work)

  Read the article

• How do I make dashboard widgets active on logon?

  - by CharlesB

  There are a few dashboard widget that are useful even when not going in Dashboard. For example, SVN Notifier sends a Growl notification when commits are made to a repository you want to watch. Or, Delivery Status does the same for status update on tracked packages. The thing is when I log into OS X, those status updates won't happen until the first time I actually enter into Dashboard, so it looks like they are not initialized at startup. How to fix this?

  Read the article

• Mail troubleshooting

  - by Jason Swett

  I'm just trying to send myself an e-mail. On on Ubuntu using sendmail. For some reason, it doesn't work. Here's the command I'm running and what shows up when I run it: jason@ve:~$ echo "Subject: test" | /usr/lib/sendmail -v [email protected] [email protected]... Connecting to [127.0.0.1] via relay... 220 ve.5wrvhfxg.vesrv.com ESMTP Sendmail 8.14.3/8.14.3/Debian-9.1ubuntu1; Wed, 29 Dec 2010 13:51:49 -0800; (No UCE/UBE) logging access from: localhost.localdomain(OK)-localhost.localdomain [127.0.0.1] >>> EHLO ve.5wrvhfxg.vesrv.com 250-ve.5wrvhfxg.vesrv.com Hello localhost.localdomain [127.0.0.1], pleased to meet you 250-ENHANCEDSTATUSCODES 250-PIPELINING 250-EXPN 250-VERB 250-8BITMIME 250-SIZE 250-DSN 250-ETRN 250-DELIVERBY 250 HELP >>> VERB 250 2.0.0 Verbose mode >>> MAIL From:<[email protected]> SIZE=14 250 2.1.0 <[email protected]>... Sender ok >>> RCPT To:<[email protected]> >>> DATA 250 2.1.5 <[email protected]>... Recipient ok 354 Enter mail, end with "." on a line by itself >>> . 050 <[email protected]>... Connecting to 205.186.165.157. via esmtp... 050 <[email protected]>... Deferred: Connection refused by 205.186.165.157. 250 2.0.0 oBTLpnEj012261 Message accepted for delivery [email protected]... Sent (oBTLpnEj012261 Message accepted for delivery) Closing connection to [127.0.0.1] >>> QUIT 221 2.0.0 ve.5wrvhfxg.vesrv.com closing connection It seems to me that the "Connection refused by 205.186.165.157" part is where things are going wrong, but I have no idea where or how to begin troubleshooting. Any advice?

  Read the article

• Sending text messages from Raspberry Pi via email fails

  - by vgm64

  I'm using mailx on my raspberry pi to try to send text messages updates for event monitoring. My phone number: 9876543210 My phone's email-to-text gateway address: [email protected] I can 1) Send emails from my raspberry pi to various email addresses. mail -r [email protected] -s "My Subject" [email protected] < body.txt and off it goes and is successfully delivered. 2) Send emails from various email address (not on RPi) using mailx to the above phone-email address and have them delivered as text messages. However, when sending emails to [email protected] from the Raspberry Pi using mailx the emails seem to spiral into the void and are never heard of again (no errors, no undeliverable messages, nothing). Does anyone know what could be causing this to go awry? Something about the basic deployment of the mail server on the pi? EDIT Based on @kobaltz's suggestion, I used sendmail instead. This led to a hang, then an error that stated that I lacked a fully qualified domain name (FQDN). I then used this website's instructions to add a domain name to the RPi. To paraphrase: I have set the FQDN in /etc/hostname: my-host-name.my-domain.com and /etc/hosts: 127.0.0.1 localhost.localdomain localhost 192.168.0.5 my-host-name.my-domain.com my-host-name Then add to /etc/mail/sendmail.cf: MASQUERADE_AS(`my-domain.com') MASQUERADE_DOMAIN(`my-host-name.my-domain.com') FEATURE(`masquerade_entire_domain') FEATURE(`masquerade_envelope') I put this in /etc/mail/sendmail.cf, BEFORE the MAILER() lines, ran sendmailconfig, answered Yes to the questions about using the existing files, and restarted sendmail. Emails now have the proper domain name. Progress, however, I am now stuck at the following error: 354 Enter mail, end with "." on a line by itself >>> . 050 <[email protected]>... Connecting to mxx.cingularme.com. via esmtp... 050 421 Service not available 050 >>> QUIT 050 <[email protected]>... Deferred: 421 Service not available 250 2.0.0 q9U3ZESt021150 Message accepted for delivery [email protected]... Sent (q9U3ZESt021150 Message accepted for delivery) Closing connection to [127.0.0.1] >>> QUIT

  Read the article

• ASP.NET/mono performance on Linux

  - by Quandary

  Anybody knows how asp.net/mono performance is on Linux ? I mean, which server gives you the best performance/delivery time (Apache/Apache2, xsp2, lighthttp, nginx, other) ? Since all asp.net goes via xsp2, I'd say xsp2 would certainly be fastest, but it's probably missing a lot of features, which lighthttp offers (e.g. mod_dosevasive, URL-rewriting, etc.).

  Read the article

• Unable to SSH into EC2 instance on Fedora 17

  - by abhishek

  I did following steps But I am not able to SSH to it(Same steps work fine on Fedora 14 image). I am getting Permission denied (publickey,gssapi-keyex,gssapi-with-mic) I created new instance using fedora 17 amazon community image(ami-2ea50247). I copied my ssh keys under /home/usertest/.ssh/ after creating a usertest I have SELINUX=disabled here is Debug info: $ ssh -vvv ec2-54-243-101-41.compute-1.amazonaws.com ssh -vvv ec2-54-243-101-41.compute-1.amazonaws.com OpenSSH_5.2p1, OpenSSL 1.0.0b-fips 16 Nov 2010 debug1: Reading configuration data /etc/ssh/ssh_config debug1: Applying options for * debug2: ssh_connect: needpriv 0 debug1: Connecting to ec2-54-243-101-41.compute-1.amazonaws.com [54.243.101.41] port 22. debug1: Connection established. debug1: identity file /home/usertest/.ssh/identity type -1 debug1: identity file /home/usertest/.ssh/id_rsa type -1 debug3: Not a RSA1 key file /home/usertest/.ssh/id_dsa. debug2: key_type_from_name: unknown key type '-----BEGIN' debug3: key_read: missing keytype debug2: key_type_from_name: unknown key type 'Proc-Type:' debug3: key_read: missing keytype debug2: key_type_from_name: unknown key type 'DEK-Info:' debug3: key_read: missing keytype debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug2: key_type_from_name: unknown key type '-----END' debug3: key_read: missing keytype debug1: identity file /home/usertest/.ssh/id_dsa type 2 debug1: Remote protocol version 2.0, remote software version OpenSSH_5.9 debug1: match: OpenSSH_5.9 pat OpenSSH* debug1: Enabling compatibility mode for protocol 2.0 debug1: Local version string SSH-2.0-OpenSSH_5.2 debug2: fd 3 setting O_NONBLOCK debug1: SSH2_MSG_KEXINIT sent debug1: SSH2_MSG_KEXINIT received debug2: kex_parse_kexinit: diffie-hellman-group-exchange-sha256,diffie-hellman-group-exchange-sha1,diffie-hellman-group14-sha1,diffie-hellman-group1-sha1 debug2: kex_parse_kexinit: ssh-rsa,ssh-dss debug2: kex_parse_kexinit: aes128-ctr,aes192-ctr,aes256-ctr,arcfour256,arcfour128,aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,aes192-cbc,aes256-cbc,arcfour,[email protected] debug2: kex_parse_kexinit: aes128-ctr,aes192-ctr,aes256-ctr,arcfour256,arcfour128,aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,aes192-cbc,aes256-cbc,arcfour,[email protected] debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,[email protected],hmac-ripemd160,[email protected],hmac-sha1-96,hmac-md5-96 debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,[email protected],hmac-ripemd160,[email protected],hmac-sha1-96,hmac-md5-96 debug2: kex_parse_kexinit: none,[email protected],zlib debug2: kex_parse_kexinit: none,[email protected],zlib debug2: kex_parse_kexinit: debug2: kex_parse_kexinit: debug2: kex_parse_kexinit: first_kex_follows 0 debug2: kex_parse_kexinit: reserved 0 debug2: kex_parse_kexinit: diffie-hellman-group-exchange-sha256,diffie-hellman-group-exchange-sha1,diffie-hellman-group14-sha1,diffie-hellman-group1-sha1 debug2: kex_parse_kexinit: ssh-rsa,ssh-dss debug2: kex_parse_kexinit: aes128-ctr,aes192-ctr,aes256-ctr,arcfour256,arcfour128,aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,aes192-cbc,aes256-cbc,arcfour,[email protected] debug2: kex_parse_kexinit: aes128-ctr,aes192-ctr,aes256-ctr,arcfour256,arcfour128,aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,aes192-cbc,aes256-cbc,arcfour,[email protected] debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,[email protected],hmac-sha2-256,hmac-sha2-256-96,hmac-sha2-512,hmac-sha2-512-96,hmac-ripemd160,[email protected],hmac-sha1-96,hmac-md5-96 debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,[email protected],hmac-sha2-256,hmac-sha2-256-96,hmac-sha2-512,hmac-sha2-512-96,hmac-ripemd160,[email protected],hmac-sha1-96,hmac-md5-96 debug2: kex_parse_kexinit: none,[email protected] debug2: kex_parse_kexinit: none,[email protected] debug2: kex_parse_kexinit: debug2: kex_parse_kexinit: debug2: kex_parse_kexinit: first_kex_follows 0 debug2: kex_parse_kexinit: reserved 0 debug2: mac_setup: found hmac-md5 debug1: kex: server->client aes128-ctr hmac-md5 none debug2: mac_setup: found hmac-md5 debug1: kex: client->server aes128-ctr hmac-md5 none debug1: SSH2_MSG_KEX_DH_GEX_REQUEST(1024<1024<8192) sent debug1: expecting SSH2_MSG_KEX_DH_GEX_GROUP debug2: dh_gen_key: priv key bits set: 131/256 debug2: bits set: 506/1024 debug1: SSH2_MSG_KEX_DH_GEX_INIT sent debug1: expecting SSH2_MSG_KEX_DH_GEX_REPLY debug3: check_host_in_hostfile: filename /home/usertest/.ssh/known_hosts debug3: check_host_in_hostfile: match line 17 debug3: check_host_in_hostfile: filename /home/usertest/.ssh/known_hosts debug3: check_host_in_hostfile: match line 17 debug1: Host 'ec2-54-243-101-41.compute-1.amazonaws.com' is known and matches the RSA host key. debug1: Found key in /home/usertest/.ssh/known_hosts:17 debug2: bits set: 500/1024 debug1: ssh_rsa_verify: signature correct debug2: kex_derive_keys debug2: set_newkeys: mode 1 debug1: SSH2_MSG_NEWKEYS sent debug1: expecting SSH2_MSG_NEWKEYS debug2: set_newkeys: mode 0 debug1: SSH2_MSG_NEWKEYS received debug1: SSH2_MSG_SERVICE_REQUEST sent debug2: service_accept: ssh-userauth debug1: SSH2_MSG_SERVICE_ACCEPT received debug2: key: /home/usertest/.ssh/identity ((nil)) debug2: key: /home/usertest/.ssh/id_rsa ((nil)) debug2: key: /home/usertest/.ssh/id_dsa (0x7f904b5ae260) debug1: Authentications that can continue: publickey,gssapi-keyex,gssapi-with-mic debug3: start over, passed a different list publickey,gssapi-keyex,gssapi-with-mic debug3: preferred gssapi-with-mic,publickey,keyboard-interactive,password debug3: authmethod_lookup gssapi-with-mic debug3: remaining preferred: publickey,keyboard-interactive,password debug3: authmethod_is_enabled gssapi-with-mic debug1: Next authentication method: gssapi-with-mic debug3: Trying to reverse map address 54.243.101.41. debug1: Unspecified GSS failure. Minor code may provide more information Credentials cache file '/tmp/krb5cc_500' not found debug1: Unspecified GSS failure. Minor code may provide more information Credentials cache file '/tmp/krb5cc_500' not found debug1: Unspecified GSS failure. Minor code may provide more information debug2: we did not send a packet, disable method debug3: authmethod_lookup publickey debug3: remaining preferred: keyboard-interactive,password debug3: authmethod_is_enabled publickey debug1: Next authentication method: publickey debug1: Trying private key: /home/usertest/.ssh/identity debug3: no such identity: /home/usertest/.ssh/identity debug1: Trying private key: /home/usertest/.ssh/id_rsa debug3: no such identity: /home/usertest/.ssh/id_rsa debug1: Offering public key: /home/usertest/.ssh/id_dsa debug3: send_pubkey_test debug2: we sent a publickey packet, wait for reply debug1: Authentications that can continue: publickey,gssapi-keyex,gssapi-with-mic debug2: we did not send a packet, disable method debug1: No more authentication methods to try. Permission denied (publickey,gssapi-keyex,gssapi-with-mic).

  Read the article

• Flush all messages in mailbox from Zimbra to another server

  - by Giovanni Lovato

  I have a primary Dovecot + Postfix mail server and a secondary Zimbra 8.0.1 server. The primary server went down for a week and all the incoming messages were delivered to the secondary server which has configured a "catch all" account. Now that the primary server is back online, I'd like to flush all messages on the "catch all" mailbox to the primary server for appropriate delivery to the corresponding user mailbox (and its own rules). Is that possible?

  Read the article

• qmail throws error "CNAME_­lookup_­failed_­temporarily"

  - by Supratik

  I am using Qmail and when I am sending mails I am sometimes getting the bellow error in my log for a particular domain. Jun 22 05:20:47 221832-web1 qmail: 1308738047.397431 delivery 1040373: deferral: CNAME_lookup_failed_temporarily._(#4.4.3)/ Can anyone please tell me what are the factors responsible for such error ? What are the DNS requests sent by Qmail when sending an email ? FYI: The patch for the DNS cache size issue is already included in Qmail.

  Read the article

< Previous Page | 63 64 65 66 67 68 69 70 71 72 73 74  | Next Page >